14
1. Which classification socks are appropriate for yarn count 32/2 ply?? Answer: We can use count 32/2 on any computerized sock. 2. What advantage can we prefer to have by 32/2 ply? Answer: - 32/2 count itself is very heavy and it is generally used to ensure HIGHER abrasion resistance & long durability. - Most retailers in Europe do not use 32/2 as it increases the cost of yarn, instead they use a higher TPM (twist per multiplier) yarn on 20/1 to get a similar abrasion result. Questionnaire

Presentation - part 2

Embed Size (px)

Citation preview

1. Which classification socks are appropriate for yarn count 32/2 ply??

Answer: We can use count 32/2 on any computerized sock.

2. What advantage can we prefer to have by 32/2 ply?

Answer:

- 32/2 count itself is very heavy and it is generally used to ensure HIGHER abrasion resistance & long durability.

- Most retailers in Europe do not use 32/2 as it increases the cost of yarn, instead they use a higher TPM (twist per multiplier) yarn on 20/1 to get a similar abrasion result.

Questionnaire

3. What should be minimum stretch measurement for cuff opening?

Answer:Other customers follow below standard;

a) For children, stretch mmt s/b: 18-19 cm

b) For Ladies & Men’s, Stretch mmt s/b: 20-21 cm

Note: We need advise what stretches are essential for Sweden.

Questionnaire

4. For more elasticity or soft/loose knitting what will affect if we change yarn count?

Answer: - Changing yarn will not give any result but using different needle machine can make socks loose knitted.Please noted socks will look a bit wider then!

5. For more tight or for more loose what does it depend actually??

Answer:- the steaming helps the socks to be more softer, stretchy.- It would also improve the shape.

Questionnaire

6. How to improve cuff opening tighter but softer elasticity with good recovery??

Answer:- Generally 70/90D Elastic is used on cuff for maximum customers.

- But changing yield (density) of spandex elasticity can be improved.

- It can also be improved by steaming the socks properly.

Questionnaire

Size, needle & diameter of the machine

Needle Size Machine diameter132 N Children 3.5”

  23-26    27-30    31-33     

144 N Children 3.7”  34-36    37-39    Ladies    37-39    40-42     

156 N Ladies 3.7”  37-39    40-42    Men’s    40-44    45-47     

168 N Men’s 4”  40-44    45-47  

How socks measures

For basic socks-KappAhl requirement- 16 cm

For golf socksKappAhl requirement- 16 cm

A. Foot Length

Plain basic socks-KappAhl requirement- 16 cm

Golf Socks -KappAhl requirement- 6 cm

B. Height

Plain basic socks-KappAhl requirement- 16 cm

Golf Socks -KappAhl requirement- 8.5 cm

C. ½ width at lower wrist

C1. ½ width at wrist

Plain basic socks-KappAhl requirement- 8 cm

D. ½ width at top relaxed

Plain Basic socks-

KappAhl requirement is 7 cm

E. Rib Height

Plain Basic socks-KappAhl requirement is 2 cm.

Plain & Terry Socks construction

- The difference between plain & terry socks is absent of loop at the end.

- Plain socks having joint in every loop & cannot open or come out.

- On the other hand terry socks having open end after knitting.

Thank you to be with me such a long time & Having a Great day!

Good bye!!