BEE3806 INDUSTRIAL TRAININGCHULIA FACILITY MANAGEMENT(FINISAR SDN BHD)

MUHAMMAD FITRI BIN HAMIDIBACHELOR (HONS) ELECTRICAL & ELECTRONICS ENGINNERING

EA12034INDUSTRIAL SUPERVISOR: EN. MAZLI BIN MANSOR

COMPANY PROFILE

CHULIA Facility Management Sdn Bhd (CFM) is a company that ventured into M&E services and Maintenance services.

CFM client base is comprised mainly of the Malaysian Government and the private sector. E.g.: Finisar Sdn Bhd & KLIA2.

CFM in Finisar are responsible for all the maintenance building of this factory except Finisar’s production.

MOTTO

VISIONMISSION

Cost culture to value culture

Unsurpassed dedication customer satisfaction

To be leader in Total Facilities Management

CFM ORGANISATION(Finisar Sdn Bhd)

Facility Manager

(Engineer)

ACMV Electrical CDA STP&Building

Fire Fighting

Assistant Engineer HR

Internship Objective

To get exposure of industry’s working environment. Adapt to work ethic, professionalism and practice EHS at the same

time. To manage working as a team with higher or lower position in

department.

Training Progress

Introduce to company

Briefing before start working (8.30a.m until 9.30a.m) Self introduce to staffs and technicians. Look around Finisar’s production lab and outside environment Attend PPE (Personal Protective Equipment) and SIPP (Site Incident

Prevention Program) class by EHS. Asset mapping

PPE & EHS TRAINING CARD

SIPP TRAINING CARD

IR Scanning (monthly checking)

Only in production lab Infrared scanning is a method to check condition of any wiring at DB,

trunking and etc. Its used thermography to display temperature of any line. Overload temperature>40◦c Change suitable wire if needed

GenSet (Weekly Maintenance)

Genset act for backup power if supply from TNB stopped. Its take 3 seconds to self-start after no supply from TNB. This generator can supply 22kV and and only supplied power for

emergency door, card scanner, CCTV and card scanner. Can supply power for 24 hours. Finisar company owns 2 GenSet, each for Phase 1 and Phase 2.

GenSet DDC800

Motor Spec Plate use in GenSet Generator specification plate

AHU(Air Handling Unit)

AHU Blower Motor Specification Plate

Digital Temperature Sensor in Production Lab

Power Circuit used in AHU’s motor is Star-Delta. Star for starting because

lower starting voltage and Delta use for maintain torque.

PPM (Planned Preventive Maintenance)

Monthly Services Sensor door Air Curtain Water cooling system Hot water system Roller Shutter

PPM Flowchart

PPM issued by HR

Check if the asset still in

good condition 

Inform QC to

approve

Maintenance and cleaning needed

No

YesDone

CONCLUSION

As a conclusion what I have learn during my training at Chulia FM is experience is important in any industry. Experience will guarantee work’s quality, not the bachelor. Work as a team also important especially with different ages and position. With a good teamwork, the outcome will be much more faster and if there is a problem, we can discuss and study it before take action. Being a great leader is as much important as others because a leader need to boost up team’s moral and must know all the situation of every department. This will bring to good communication with other staff. Lastly, during my internship, I realized that learning theoretical is completely difference with practical.

RECOMMENDATION

Although Chulia has tighten their safety acts, but there are still some staff or technician ignoring this responsibility. Employees shall be emphasized their safety during working.

There are always has miscommunication between executives and subordinates. So, always open minded and stay focus on work in order to achieve company goals and objectives.

THANK YOU FOR YOUR ATTENTION