Precision Dormer Main Cat

��

www.precisiondormer.com2

How to Use This Catalog

To order our products, or if you have any questions, please contact our customer service team at the numbers listed below, or contact [email protected]. To find a distributor in your area, please visit our web site.USA301 Industrial AvenueCrystal Lake, IL 60012Phone: 1-800-877-3745Fax: 1-815-459-2804Hours: M-F 7a.m.-5p.m. CST

CANADA2550 Meadowvale Blvd, Unit 3 Mississauga, ON L5N 8C2Phone: 1-888-336-7637En Français: 1-888-368-8457Fax: 905-542-7000Hours: M-F 8a.m.-5p.m. EST

AMG ChartsOur AMG (Application Material Group) Charts are located at the front of each tool section and are designed to give you all the product information you will need to find the best tool quickly.

In the AMG example seen below (see page 12 - Solid Carbide Drill AMG), you can find this information:

How to use the chart to find operating parameters

Tool features

Product pages:• Features• Drawings• Sizes• Order Codes

Customer Service, Sales and Technical Support

Application Material Groups

Product pages (see below)

www.precisiondormer.com 3

B-CE

D

MQ

L

Style Index (Alpha/Numeric Order) 4

DRILLS Table of Contents .............................................................6 Technical (Feed Rates) ....................................................9

SOLID CARBIDE DRILLS AMG Chart (Products Follow) .......................................12

HSS DRILLS Stub Drills AMG Chart (Products Follow) .....................26

Jobber Drills AMG Chart (Product Follow) ....................54

Taper Length Drills AMG Chart (Product Follow) ........108

Extra Length Drills AMG Chart (Products Follow) ......136

Taper/Redc’d Shank AMG Chart (Products Follow) ...152

Special Purp./Sets AMG Chart (Products Follow) ......166

TAPS and DIES Table of Contents .........................................................182 AMG Charts ................................................................186 Technical Charts ..........................................................201 Straight Flute Taps ....................................................... 211 Spiral Point Taps ..........................................................252 Spiral Flute Taps ..........................................................285 Thread Forming Taps ..................................................308 Pipe Taps .....................................................................322 Drill and Tap, Wrenches & Dies ...................................336

SOLID CARBIDE END MILLS Table of Contents .........................................................345 Technical (Feed Rates) ................................................346 AMG Chart (Products Follow) .....................................348

HSS END MILLS Table of Contents .........................................................391 Technical (Feed Rates) ................................................392 AMG Chart (Products Follow) .....................................394

REAMERS, MISC Table of Contents .........................................................437 Technical (Feed Rates) ................................................438 AMG Chart (Products Follow) .....................................440

Quick Search by Tool Style on

next page

Table of Contents


Product Index by Style A

Drills Solid Carbide HSS Stub HSS Jobber HSS Taper Length HSS Extra Length HSS Taper/Red. Shank Special Purpose Taps/Dies Straight Flute Spiral Point Spiral Flute Thread Forming Taper Pipe Miscellaneous Taps Dies End Mills Solid Carbide HSS Reamers Counterbores Countersinks

Application/ Material Guides

Drills

SC End Mills

HSS End Mills

Reamers/Counterbores

Feed Rate Charts8

346

392

438

12

26

54

108

136

152

166

186

190

194

196

198

200

200

348

394

440

441

442

M

Drills

Taps/Dies

SC End Mills

HSS End Mills

Reamers/Counterbores

Countersinks

Guide to Icons11

203

348

394

440

442

68

66

34

65

172

172

173

173

150

60

28

58

59

62

110

30

33

64

112

31

138

139

139

175

A002

A012

A022

A141

A217

A218

A221

A236

A345

A510

A520

A553

A554

A577

A578

A597

A720

A907A916A927A976A977

A978

ATR41

BB76HA 171

C430

432

433

435

436

436

141

140

141

140

C191

C192

C291

C292

C391

C392

CO500-12

CO500-6

CO501-12

CO501-6

DD000

D12F

D12W

D13F

D13M

D21

D31F

D31W

D33F

D33L

D33M

168

18

19

14

14

24

20

21

22

22

24

D33W

D444

D555

DC

Drill Sets

DS-90

23

169

170

25

178

25

EE000

E001

E002

E003

E005

E006

E007

E008

E009

E010

E011

E012

E013

E015

E016

E017

E018

E025

E026

E027

E028

E029

E035

E036

E037

E038

E039

E040

E041

E042

E043

E044

E045

E046

E048

E049

E050

E051

E052

E053

E054

E055

E057

259

260

294

295

256

257

291

291

310

261

262

296

297

258

258

292

292

252

254

285

286

308

253

255

287

288

309

330

330

331

331

299

263

264

299

263

298

298

300

242

243

264

265

E058

E059

E060

E061

E064

E069

E071

E074

E079

E080

E085

E094

E097

E098

E099

E1302

E1302G

E1302V

E1304

E1304G

E1304V

E2302

E2304

E3302

E3302G

E3302M

E3302MG

E3302MV

E3302V

E3303

E3303G

E3303V

E3304

E3304G

E3304M

E3304MG

E3304MV

E3304V

E3603

E3603G

E3603V

E4302

E4304

E500

E501

E513

E547

E550

E6302

E6302G

300

242

265

212

309

289

214

310

290

313

293

311

311

312

312

355

356

356

374

374

375

357

375

357

358

360

361

362

359

372

373

373

376

377

379

380

381

378

354

354

355

368

386

244

247

248

332

333

369

370

E6302V

E6304

E6304G

E6304V

E650, E651

E653

E710

EB3302

EB3302G

EB3302M

EB3302MG

EB3302MV

EB3302V

EB3304

EB3304G

EB3304M

EB3304MG

EB3304MV

EB3304V

EB4302

EB4304

EB6302

EB6302G

EB6302V

EB6304

EB6304G

EB6304V

EZ10P

EZ18P

EZ40G

EZ40P

EZ41G

EZ41P

EZ51P

370

387

388

388

335

336

322

363

364

366

367

368

365

382

383

385

386

384

384

369

387

371

371

372

389

389

390

84

84

43

44

45

45

126

GG135

G136

G137

G138

G154

G155

465

466

466

467

467

467H

HX10

HX15

HX18

LL10

L18

L209

L40

106

107

158

53

85

85

86

M40CO

M41CO

M42C0

M51CO

M52CO

40

41

40

123

124

QQC0860P

QC1290P

QC21

QC21CO

QC21COM

QC21G

QC21GM

QC21M

QC21P

QC21PM

QC21V

QC41

QC41CO

QC41G

QC41P

QC91

QC91CO

QC91COM

QC91G

QC91GM

QC91M

QC91P

QC91PM

QC91V

146

148

74

70

71

73

76

77

75

77

72

38

36

37

39

118

114

115

117

120

121

119

122

116R

R002

R022

R08

R09

R10

R10A

R10B

R10CO

R10H

R10P

R10PM

R10S

R15

R15A

R15B

R15CO

R15P

R18

16

15

102

133

91

89

87

78

103

97

100

106

93

90

88

80

99

92


0860

2A

2AB

2ACO

60B

76HA

76LO

1301

Product Index by Style (con’t) R18A

R18B

R18CO

R18H

R18P

R18S

R40

R40C

R41

R41C

R42

R42C

R51

R51FS

R51K

R51OH

R52

R52FS

R53OH

R55

R55FS

R56

R56CO

R57

R58

R88CO

R89CO

RTDA

89

88

79

104

98

105

50

46

51

47

52

48

128

134

127

125

129

134

125

130

135

163

162

164

165

83

83

390S

SETS

S209

SM8

SPL, SPLG

SPR, SPRG

SPS, SPSG

SS300

SS400

178

159

176

174

174

174

457

457

TT100

T110

T400

TC9002

TC9003

TC9008

TC9009

TN1500(UNC)

TN1500(UNF)

TN1534(UNC)

TN1534(UNF)

TN1541(NPT)

211

211

458

401

404

403

406

229

229

269

269

323

TN1543(NPTF)

TN1585 (UNC)

TN1585(UNF)

TN1785

TN9002

TN9003

TN9008

TN9009

TN920

TN921

TN923

TN940

TN943

TN945

TN946

TN948

TS10,15,18

TS40, 41

TS51, 52, 55

324

273

273

275

400

404

402

405

411

413

416

420

426

422

424

427

177

177

177

UU1511 237

0860-883

209

209CO

209OH

229C

4ASM

4ASMCO

411

430

500-6

500-12

501-6

501-12

502-6

502-12

5ATL

5ATS

707, 727, 757

860

883

146

95

94

81

176

171

171

156

154

155

337

49

42

468

468

142

144

143

145

142

144

131

160

468

146

429900-982

900

423

901

905

907

911

917

919

920

920K

921

922

923

930

931

933

940

941

943

944

945

946

947

948

960

961

962

963

980

981

982

424

412

416

428

428

429

409

410

412

413

415

417

418

418

419

421

425

421

422

423

425

427

407

408

408

407

414

414

415

1215-13011215

1290

337

147

338

1500-1788

1500(UNC)

1500(UNF)

1500(UNS)

1500A(UNC)

1500A(UNF)

1500L(UNC)

1500L(UNF)

1500L(UNS)

1500OV(UNC)

1500S

1505(UNC)

1505(UNS)

1508(UNC)

1508(UNF)

1511

1519(UNC)

220

222

223

228

228

230

230

231

231

224

234

235

232

232

149

238

1528(UNC)

1528(UNF)

1528(UNS)

1528S

1534(UNC)

1534(UNF)

1534NE(UNC)

1534NE(UNF)

1534NR(UNC)

1534NR(UNF)

1534NR(UNS)

1541(NPT)

1542(NPS)

1543(NPTF)

1544(NPT)

1545(NPT)

1545A(NPT)

1546(NPTF)

1548(NPT)

1549(NPTF)

1567(NPTF)

1568(NPT)

1572(UNC)

1572(UNF)

1578(UNC)

1578(UNF)

1580(M)

1580(UNC)

1580(UNF)

1582(UNC)

1582(UNF)

1585(UNC)

1585(UNF)

1585A(UNC)

1585A(UNF)

1585NR(UNC)

1585NR(UNF)

1585OV(UNC)

1586(UNC)

1586(UNF)

1587(UNC)

1587(UNF)

1588(UNC)

1588(UNF)

1590(UNC)

1590(UNF)

1591(UNC)

1591(UNF)

1592(NPSF)

1593(UNC)

216

218

218

219

266

267

283

283

276

277

277

323

329

324

325

325

326

326

328

328

327

327

236

237

284

284

316

314

315

301

301

270

271

272

272

278

279

281

302

302

303

303

304

304

306

306

307

307

329

280

1593(UNF)

1595(UNC)

1595(UNF)

1599(M)

1599(UNC)

1599(UNF)

1599SB(M)

280

233

233

241

240

240

2411600(UNC)

1600(UNF)

1634(UNC)

1634(UNF)

1700(M)

1700S

1785M

1785NR

1788(M)

239

239

268

268

225

227

275

282

305

1800-3850

1800

1813

1815

1816

1985(UNC)

1985(UNF)

1900

1994(UNC)

1994(UNF)

468

149

468

468

274

274

468

334

3342010

2025

2025S

2510

2325M

2710M

3150

3300(M)

3300(UNC)

3300(UNF)

3306E(UNC)

3306E(UNF)

3850

341

339

340

342

340

343

344

319

317

318

320

321

338

4500-9009

4500

4531

4532

4533

4533S

4535

4536

4537

4543

4579

449

450

455

443

446

447

454

453

448

456

4587

4588

4591

4600

4602

4603

4608

4700

4702

4703

4704

4705

4706

8007

9002

9003

9004

9008

9009

451

452

451

452

464

465

456

461

459

460

463

462

461

338

400

403

406

402

405

Drill Table of Contents


Style Description Size Point Angle Finish Page No.

18 19 14 24 20 21 22 22 24 23 25 25 16 15

49 42 34 28 30 33 31 43 44 45 45 53 40 38 36 37 39 50 46 51 47 52 48

68 66 65 60 58 59 62 64 74 70 71 73 76 75 72

Solid Carbide D12F Slow Helix, Short F 135° BrightD12W Slow Helix, Short W 135° BrightD13F, D13M 3 Flute Solid Short F , M 150° BrightD21 Spade Drill F 118° BrightD31F Short F 140° BrightD31W Short W 140° BrightD33F Standard Length F 118° BrightD33L Standard Length L 118° BrightD33M Standard Length M 118° BrightD33W Standard Length W 118° BrightDC Center Drill No. 60° BrightDS-90 Spotting Drill F 90° BrightR002 Standard Length F, W, L, M 118° Bright/TiN R022 Short F, W, L, M 118° Bright/TiN Stub 4ASM Heavy-Duty M 135° Steam Oxide 4ASMCO Heavy-Duty M 135° Bronze A022 TiN-Tipped F,M 135° Bright/TiN A520 ADX, Quick Helix, CNC Machining F,M 130° TiN A597 PFX, Cobalt, Deep-Hole Drilling M 130° TiAlN A720 Micro M 118° Bright A927 PFX, Cobalt, Deep-Hole Drilling F,M 130° Bright EZ40G Parabolic F 135° TiN EZ40P Parabolic F 135° Bright EZ41G Parabolic W 135° TiN EZ41P Parabolic W 135° Bright L40 Left-Hand F 118° Bright M40, 41, 42CO Heavy-Duty F, W, L 135° Bronze QC41 Wide-Land Parabolic F,W 135° Steam Oxide QC41CO Wide-Land Parabolic F,W 135° Bronze QC41G Wide-Land Parabolic F,W 135° TiN QC41P Wide-Land Parabolic F,W 135° Bright R40 General Purpose F 118° Bright R40C Heavy-Duty F 135° Steam Oxide R41 General Purpose W 118° Bright R41C Heavy-Duty W 135° Steam Oxide R42 General Purpose L 118° Bright R42C Heavy-Duty L 135° Steam Oxide Jobber A002 118°, 4-Facet Point M 118° Bright/TiNA012 TiN-Tipped F, L, W 118° Bright/TiNA141 Fast Spiral F 135° Steam Oxide/BronzeA510 ADX, Quick Helix, CNC Machining F, M 130° TiNA553 ADX Coolant M 130° TIAlNA554 ADX Coolant M 130° TIAlNA577 PFX, Cobalt Deep-Hole M 130° BrightA907 PFX, Cobalt Deep-Hole F, L,W 130° BrightQC21 Wide-Land Parabolic F, W 135° Steam OxideQC21CO Wide-Land Parabolic F, W, L 135° BronzeQC21COM Wide-Land Parabolic M 135° BronzeQC21G Wide-Land Parabolic F, W 135° TiNQC21GM Wide-Land Parabolic M 135° TiNQC21P Wide-Land Parabolic F, W, L 135° BrightQC21V Wide-Land Parabolic F, W 135° TiAlN




Taper

Jobber (con’t)95 94 81 84 84 85 85 86

106 77 77

102 91 89 87 78

103 97

100 106

93 90 88 80 99 92 89 88 79

104 98

105 83 83

131 110 112 126 123 124 118 114 115 117 120 121 119 122 116 133 128 134 127 125 129 134

2A General Purpose M 118° Bright2AB General Purpose M 118° Steam Oxide2ACO Heavy-Duty, Type J M 135° BronzeEZ10P Parabolic F 135° BrightEZ18P Parabolic W 135° BrightHX10 General Purpose F 135° Purple/BronzeHX15 General Purpose L 135° Purple/BronzeHX18 General Purpose W 135° Purple/BronzeL10, L18 Left Hand F, W 118° BrightQC21M Wide-Land Parabolic M 135° Steam Oxide OxideQC21PM Wide-Land Parabolic F 135° BrightR08 Auto, Tang F, L, W 118° Steam OxideR10 General Purpose F 118° Steam OxideR10A Heavy-Duty, Type A F 118° Steam OxideR10B Heavy-Duty, Type B F 135° Steam OxideR10CO Heavy-Duty, Type J F 135° BronzeR10H High Helix F 118° BrightR10P General Purpose F 118° BrightR10PM General Purpose M 118° BrightR10S Low Helix W 118° BrightR15 General Purpose L 118° Steam OxideR15A Heavy-Duty, Type A L 118° Steam OxideR15B Heavy-Duty, Type B L 135° Steam OxideR15CO Heavy-Duty, Type J L 135° BronzeR15P General Purpose L 118° BrightR18 General Purpose W 118° Steam OxideR18A Heavy-Duty, Type A W 118° Steam OxideR18B Heavy-Duty, Type B W 135° Steam OxideR18CO Heavy-Duty, Type J W 135° BronzeR18H High Helix W 118° BrightR18P General Purpose W 118° BrightR18S Low Helix F 118° BrightR88CO Heavy-Duty, Type D F 135° BronzeR89CO Heavy-Duty, Type D W 135° Bronze

5ATL General Purpose F, M 118° Bright, Steam OxideA578 PFX M 130° TIAlNA916 PFX F, M 130° BrightEZ51P Tanged F 135° BrightM51CO Heavy-Duty F 135° BronzeM52CO Heavy-Duty W 135° BronzeQC91 Wide-Land Parabolic F, W 135° Steam OxideQC91CO Wide-Land Parabolic F, W 135° BronzeQC91COM Wide-Land Parabolic M 135° BronzeQC91G Wide-Land Parabolic F, W 135° TiNQC91GM Wide-Land Parabolic M 135° TiNQC91M Wide-Land Parabolic M 135° Steam Oxide QC91P Wide-Land Parabolic F, W 135° BrightQC91PM Wide-Land Parabolic M 135° BrightQC91V Wide-Land Parabolic F, W 135° TiAlNR09 Auto Tang F 118° Steam OxideR51 General Purpose F 118° BrightR51FS High Helix F 118° BrightR51K Tanged F 118° Steam OxideR51OH 23° Helix F 118° BrightR52 General Purpose W 118° BrightR52FS High Helix W 118° Bright

(con‘t)




Extra Length

Taper Shank/Reduced Shank

Miscellaneous/Special Purpose/Sets

Taper (con’t)125 130 135

146 147 149 149 144 142 145 143 144 142 150 138 141 140 141 140 146 148

156 154 155 160 158 163 162 164 165 159

176 171 171 172 173 175 171 168 169 170 178 176 174 174 174 177 177 177

R53OH 34° Helix F 118° BrightR55 General Purpose L 118° BrightR55FS High Helix L 118° Bright

0860 8” Extra Length F 118° Bright1290 12” Extra Length F 118° Bright1511 15” Extra Length F 118° Bright1813 18” Extra Length F 118° Bright500-12 Aircraft Extension, Type B F 135° Steam Oxide500-6 Aircraft Extension, Type B F 135° Steam Oxide501-12 Aircraft Extension, Type B W 135° Steam Oxide501-6 Aircraft Extension, Type B W 135° Steam Oxide502-12 Aircraft Extension, Type B L 135° Steam Oxide502-6 Aircraft Extension, Type B L 135° Steam OxideA345 Taper Shank F, M 118° Steam OxideA976, 977, 978 PFX, Cobalt, Deep-Hole Drilling F, W 130° BrightCO500-12 Heavy-Duty, Cobalt, 12” F 135° BronzeCO500-6 Heavy-Duty, Cobalt, 6” F 135° BronzeCO501-12 Heavy-Duty, Cobalt, 12” W 135° BronzeCO501-6 Heavy-Duty, Cobalt, 6” W 135° BronzeQC0860P Wide-Land Parabolic F 135° BrightQC1290P Wide-Land Parabolic F 135° Bright

209 Taper Shank F 118° Steam Oxide209CO Taper Shank F 135° Bronze209OH 32°, Taper, Coolant F 118° Steam Oxide5ATS Taper Shank M 118° Steam OxideL209 Large Taper F 118° Steam OxideR56 1/2” Reduced Shank, S&D F 118° Bright/Steam Oxide R56CO 1/2”, Round Red. Shank, S&D F 118° Steam Oxide/Bronze R57 1/2”, S&D, 3-Flat Shank F 118° Bright/Steam Oxide R58 1/2”, S&D, Round Shank F 118° Bright/Steam Oxide S209 Small Taper F 118° Steam Oxide

60B Drill Blank F N/A Bright76HA Combined/Drill C’Sink, Reg. Lgth No. 60° C’Sink Angle Bright76LO Combined/Drill C’Sink, Extra Lgth No. 60° Point Angle BrightA217, A218 Center Drill No. 120° BrightA221, A236 Center Drill No. 118° BrightATR41 Aircraft Taper Router No. N/A BrightB76HA Combined/Drill C’Sink, Bell Type No. 60/120° Pt. Angle BrightD000 Carbide-Tipped Die F 118° BrightD444 Carbide-Tipped Jobber F, W, L 118° BrightD555 Carbide-Tipped Taper Length F 118° BrightDrill Sets All SM8 Body Drill F 135° Split Point Steam OxideSPL, SPLG Spotting Drill, Long F 90° or 120° Bright or TiNSPR, SPRG Spotting Drill, Regular F 90° or 120° Bright or TiNSPS, SPSG Spotting Drill, Short F 90° or 120° Bright or TiNTS10,15,18 Threaded Hex Shank, Short F 135° Split Point Steam OxideTS40, 41 Threaded Hex Shank, Stub F 135° Split Point Steam OxideTS51, 52, 55 Threaded Hex Shank, Long F 135° Split Point Steam Oxide

(con‘t)

www.precisiondormer.com

Size

Feed in Inches per Revolution (IPR) ± 25% Ø Diameter

1mm/ 1/32”

2mm/ 3/32”

3mm/ 1/8”

4mm/ 5/32”

5mm/ 3/16”

6mm/ 1/4”

8mm/ 5/16”

10mm/ 3/8”

12mm/ 1/2”

15mm/ 9/16”

16mm/ 5/8”

20mm/ 3/4”

25mm/ 1”

30mm/ 1.1/8”

40mm/ 1.5/8”

50mm/ 2”

A 0.0004 0.0009 0.0011 0.0013 0.0014 0.0017 0.0021 0.0024 0.0027 0.0032 0.0034 0.0043 0.0049 0.0053 0.0061 0.0069B 0.0006 0.0011 0.0015 0.0016 0.0018 0.0021 0.0026 0.0031 0.0035 0.0041 0.0043 0.0053 0.0060 0.0065 0.0074 0.0082C 0.0006 0.0013 0.0017 0.0020 0.0022 0.0025 0.0031 0.0039 0.0043 0.0049 0.0051 0.0063 0.0071 0.0077 0.0087 0.0094D 0.0006 0.0015 0.0021 0.0024 0.0027 0.0031 0.0039 0.0047 0.0051 0.0059 0.0061 0.0074 0.0083 0.0090 0.0100 0.0108E 0.0007 0.0017 0.0024 0.0028 0.0031 0.0037 0.0045 0.0055 0.0059 0.0068 0.0071 0.0085 0.0094 0.0102 0.0112 0.0122F 0.0007 0.0020 0.0029 0.0033 0.0037 0.0043 0.0054 0.0065 0.0070 0.0080 0.0083 0.0098 0.0108 0.0116 0.0126 0.0135G 0.0007 0.0022 0.0033 0.0038 0.0043 0.0050 0.0063 0.0075 0.0081 0.0091 0.0094 0.0110 0.0122 0.0130 0.0140 0.0148H 0.0008 0.0026 0.0040 0.0046 0.0051 0.0059 0.0075 0.0090 0.0096 0.0107 0.0110 0.0126 0.0140 0.0148 0.0157 0.0165I 0.0008 0.0030 0.0047 0.0053 0.0059 0.0068 0.0087 0.0104 0.0110 0.0122 0.0126 0.0142 0.0157 0.0165 0.0173 0.0181J 0.0009 0.0033 0.0053 0.0060 0.0067 0.0078 0.0098 0.0117 0.0124 0.0137 0.0142 0.0159 0.0175 0.0183 0.0191 0.0198K 0.0010 0.0036 0.0059 0.0067 0.0075 0.0087 0.0110 0.0130 0.0138 0.0153 0.0157 0.0177 0.0193 0.0201 0.0209 0.0215L 0.0011 0.0040 0.0065 0.0073 0.0082 0.0094 0.0120 0.0142 0.0152 0.0165 0.0169 0.0191 0.0207 0.0215 0.0224 0.0231M 0.0012 0.0043 0.0071 0.0080 0.0089 0.0102 0.0130 0.0154 0.0165 0.0177 0.0181 0.0205 0.0220 0.0228 0.0238 0.0248N 0.0013 0.0047 0.0077 0.0086 0.0095 0.0110 0.0140 0.0165 0.0179 0.0189 0.0193 0.0219 0.0234 0.0242 0.0253 0.0265S 0.0003 0.0006 0.0008 0.0010 0.0012 0.0015 0.0020 0.0031 0.0039 0.0048 0.0051 0.0059T 0.0006 0.0011 0.0016 0.0020 0.0024 0.0028 0.0035 0.0043 0.0051 0.0063 0.0067 0.0075U 0.0010 0.0019 0.0028 0.0031 0.0035 0.0042 0.0055 0.0067 0.0079 0.0088 0.0091 0.0094V 0.0015 0.0027 0.0039 0.0045 0.0051 0.0060 0.0079 0.0098 0.0110 0.0122 0.0126 0.0134W 0.0019 0.0035 0.0051 0.0059 0.0067 0.0079 0.0102 0.0130 0.0150 0.0165 0.0169 0.0177X 0.0022 0.0041 0.0059 0.0071 0.0083 0.0098 0.0130 0.0165 0.0189 0.0210 0.0217 0.0228Y 0.0027 0.0049 0.0071 0.0087 0.0102 0.0125 0.0169 0.0217 0.0276 0.0276 0.0276 0.0291Z 0.0037 0.0068 0.0098 0.0128 0.0157 0.0210 0.0315 0.0394 0.0433 0.0463 0.0472 0.0472

How To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code) 2. Find the closest diameter for your cutting application on the chart to find your IPR

Alpha Code

Easy Calculations: (inch)

RPM = SFM/D x 3.82 SFM = RPM x D x .262 IPM = IPR x RPM IPR = IPM ÷ RPM Inch = mm x .0394

Terms: D = Drill DiameterRPM = Revolutions Per MinuteSFM = Surface Feet per Minute IPM = Inches Per Minute IPR = Inches Per Revolution IPR = Inches Per Revolution

Drill Feed Rate Chart - Inches

9


Feed in mm per Revolution (IPR) ± 25% Ø Diameter

1mm/ 1/32”

2mm/ 3/32”

3mm/ 1/8”

4mm/ 5/32”

5mm/ 3/16”

6mm/ 1/4”

8mm/ 5/16”

10mm/ 3/8”

12mm/ 1/2”

15mm/ 9/16”

16mm/ 5/8”

20mm/ 3/4”

25mm/ 1”

30mm/ 1.1/8”

40mm/ 1.5/8”

50mm/ 2”

How To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code) 2. Find the closest diameter for your cutting application on the chart to find your IPR

Alpha CodeA 0.0102 0.0229 0.0279 0.0330 0.0356 0.0432 0.0533 0.0610 0.0686 0.0813 0.0864 0.1092 0.1245 0.1346 0.1549 0.1753

B 0.0152 0.0279 0.0381 0.0406 0.0457 0.0533 0.0660 0.0787 0.0889 0.1041 0.1092 0.1346 0.1524 0.1651 0.1880 0.2083

C 0.0152 0.0330 0.0432 0.0508 0.0559 0.0635 0.0787 0.0991 0.1092 0.1245 0.1295 0.1600 0.1803 0.1956 0.2210 0.2388

D 0.0152 0.0381 0.0533 0.0610 0.0686 0.0787 0.0991 0.1194 0.1295 0.1499 0.1549 0.1880 0.2108 0.2286 0.2540 0.2743

E 0.0178 0.0432 0.0610 0.0711 0.0787 0.0940 0.1143 0.1397 0.1499 0.1727 0.1803 0.2159 0.2388 0.2591 0.2845 0.3099

F 0.0178 0.0508 0.0737 0.0838 0.0940 0.1092 0.1372 0.1651 0.1778 0.2032 0.2108 0.2489 0.2743 0.2946 0.3200 0.3429

G 0.0178 0.0559 0.0838 0.0965 0.1092 0.1270 0.1600 0.1905 0.2057 0.2311 0.2388 0.2794 0.3099 0.3302 0.3556 0.3759

H 0.0203 0.0660 0.1016 0.1168 0.1295 0.1499 0.1905 0.2286 0.2438 0.2718 0.2794 0.3200 0.3556 0.3759 0.3988 0.4191

I 0.0203 0.0762 0.1194 0.1346 0.1499 0.1727 0.2210 0.2642 0.2794 0.3099 0.3200 0.3607 0.3988 0.4191 0.4394 0.4597

J 0.0229 0.0838 0.1346 0.1524 0.1702 0.1981 0.2489 0.2972 0.3150 0.3480 0.3607 0.4039 0.4445 0.4648 0.4851 0.5029

K 0.0254 0.0914 0.1499 0.1702 0.1905 0.2210 0.2794 0.3302 0.3505 0.3886 0.3988 0.4496 0.4902 0.5105 0.5309 0.5461

L 0.0279 0.1016 0.1651 0.1854 0.2083 0.2388 0.3048 0.3607 0.3861 0.4191 0.4293 0.4851 0.5258 0.5461 0.5690 0.5867

M 0.0305 0.1092 0.1803 0.2032 0.2261 0.2591 0.3302 0.3912 0.4191 0.4496 0.4597 0.5207 0.5588 0.5791 0.6045 0.6299

N 0.0330 0.1194 0.1956 0.2184 0.2413 0.2794 0.3556 0.4191 0.4547 0.4801 0.4902 0.5563 0.5944 0.6147 0.6426 0.6731

S 0.0076 0.0152 0.0203 0.0254 0.0305 0.0381 0.0508 0.0787 0.0991 0.1219 0.1295 0.1499

T 0.0152 0.0279 0.0406 0.0508 0.0610 0.0711 0.0889 0.1092 0.1295 0.1600 0.1702 0.1905

U 0.0254 0.0483 0.0711 0.0787 0.0889 0.1067 0.1397 0.1702 0.2007 0.2235 0.2311 0.2388

V 0.0381 0.0686 0.0991 0.1143 0.1295 0.1524 0.2007 0.2489 0.2794 0.3099 0.3200 0.3404

W 0.0483 0.0889 0.1295 0.1499 0.1702 0.2007 0.2591 0.3302 0.3810 0.4191 0.4293 0.4496

X 0.0559 0.1041 0.1499 0.1803 0.2108 0.2489 0.3302 0.4191 0.4801 0.5334 0.5512 0.5791

Y 0.0686 0.1245 0.1803 0.2210 0.2591 0.3175 0.4293 0.5512 0.7010 0.7010 0.7010 0.7391

Z 0.0940 0.1727 0.2489 0.3251 0.3988 0.5334 0.8001 1.0008 1.0998 1.1760 1.1989 1.1989

Easy Calculations: (mm)

RPM = [(m/min.) x 1000] ÷ (3.14 x D) m/min. = SFM ÷ 3.281

mm/min. = (SFM ÷ 3.281) x 1000 mm = Inch ÷ .0394 Terms: D = Drill DiameterRPM = Revolutions Per Minutem/min. = Meters Per Minute (Cutting Speed) mm/min. = Millimeters Per Minute mm/rev. = Millimeters Per Revolution

Drill Feed Rate Chart - Metric

10


Split Point

4-Facet Point

Radius Split Point

ADX SP Coolant Point

Thinned Point

Special Point Geometry (A002, A012)

Special Point Geometry (ADX)

Whistle Notch Shank

Cylindrical Shank

High Speed Steel Material

High Speed CobaltMaterial

Coolant

Regular Helix21° - 34°

Slow Helix10° - 20°

QuickHelix35° - 45°

Carbide (Hard Metal)

Carbide Tipped

Straight Shank

Reduced Shank

Shank with Tang

Shank with Sq. End

Taper Shank

Continuously Thinned Web

DormerStandard

Solid Carbide

Tin-Tipped

Steam Oxide

BrightFinish

TiAlNTop Coat

Bright with TiN Tip

Bronze

CountersinkAngle

Conventional Point

PFX PointContinually Thinned Web Point

ADX Point Split Point

Stub/Short Length

Intermediate Length

Jobber/Standard Length

Long Length

Extra Length

Guide to Icons - Drills

StraightFlute

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Application Material Groups (AMG)

1. Steel

1.1 Magnetic soft steel 12L14, 12L151.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A361.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-11461.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,4201.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,4201.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,4201.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T11.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1

2.Stainless Steel

2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 4402.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-3502.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH

3.Cast Iron

3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 203.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-603.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG703.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C

4.Titanium4.1 Titanium, unalloyed Commercially Pure4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967

5.Nickel5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 55535.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286

6.Copper

6.1 Copper Commercially Pure6.2 ß-Brass, Bronze 314-340, 350-3706.3 α-Brass Alloyed Cu + Al + Fe, Long Chipping6.4 High Strength Bronze Ampco 18-25

7.Aluminium Magnesium

7.1 Al, Mg, unalloyed Commercially Pure7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-3407.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-3907.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced

8.Synthetic Materials

8.1 Thermoplastics Ultramid, Polystrol8.2 Thermosetting plastics Bakelit, Pertinax8.3 Reinforced plastic materials CFK, GFKAFK

9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic10.Graphite 10.1 Standard graphite


Sol

id C

arbi

de D

rills

Solid Carbide Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

How To Use This AMG Chart:

Determine your Workpiece Material. Select Material from the AMG Chart below. Use the icons to find Depth of Cut and other Product Features. Find the Surface Feet Per Minute (SFM) and Alpha Code. example: 279 S 279 = SFM S = Alpha Code to find your Feed Rate

To calculate Cutting Feed Rate, refer to chart on pages 9-10.

Page # for easy reference

● = Good for Application

■ = Excellent for Application


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Style:

Tool Material:

Finish/Coating:Standard:

Direction of Cut:

Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:

Point Style:Point Type:

12

1

23

4

2

13

D13F D13M R022 R002

14 15 16-17■246V ■246U■213V ■213U

■279U ■213V ■213U■230U ■180V ■180U■230U ■148U ■148T■164T ■148U ■148T■148S ■98U ■98T■131S ■98U ■98T

●246V ■246X ■246W●246V ■246X ■246W●180V ■180X ■180W●180V ■180X ■180W●131T●131T●82T

●72T●46S

●623W ●623V●623W ●623V

■230W●508W ●508V

●656X ●508W ●508V■367X ●279W ●279V■197X ●148W ●148V

●148X ●148X●246W ●246V

■105U

Surface Feet per Minute (SFM)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


Sol

id C

arbi

de D

rills

Solid Carbide Drills (con‘t)

13

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

D33(F, W, L, M)

D21 DS-90 DC

22-24 24 25 25●279S ●279S ■279S ●279S●246S ●246S ■246S ●246S●246S ●246S ■246S ●246S●230S ●230S ■230S ●230S●148S ●148S ■148S ●148S●148S ●148S ■148S ●148S●98S ●98S ■98S ●98S●98S ●98S ■98S ●98S●98S ■174S

■148S

●246T ●246T ■246T ●246T●246T ●246T ■246T ●246T●180T ●180T ■180T ●180T●180T ●180T ■180T ●180T

■148T■115T■82S■148T■98S■66S■902V

■820V ■820V ■820V ■820V■820V ■820V ■820V ■820V

■230T●656V ●656V ■656V ●656V●656V ●656V ■656V ●656V●367V ●367V ■367V ●367V●197V ●197V ■197V ●197V■197X ■197X ■197X ■197X■328V ■328V ■328V ■328V

D31F D31W

20-21●279S●246S●246S●230S●148S●148S●98S●98S

●75S●65S●246T●246T●180T●180T

■820V■820V

●656V●656V●367V●197V■197X■328V

D12F D12W

18-19●279S●246S●246S●230S●148S●148S●98S●98S ●98S●98S●75S●65S●246T●246T●180T●180T

■820V■820V

●656V●656V●367V●197V■197X■328V


www.precisiondormer.com ■ = EXCELLENT FOR APPLICATION ● = GOOD FOR APPLICATION14

D13F - D13M

D13F

■●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/8 0.1250 3/4 1.7/8 0060089/64 0.1406 13/16 1.15/16 0060095/32 0.1562 7/8 2.1/16 00601011/64 0.1719 7/8 2.1/8 0060113/16 0.1875 15/16 2.3/16 00601213/64 0.2031 1“ 2.1/4 0060137/32 0.2188 1.1/16 2.3/8 00601415/64 0.2344 1.1/8 2.7/16 0060151/4 0.2500 1.3/16 2.1/2 00601617/64 0.2656 1.1/4 2.5/8 0060179/32 0.2812 1.5/16 2.11/16 00601819/64 0.2969 1.3/8 2.3/4 0060195/16 0.3125 1.7/16 2.13/16 00602021/64 0.3281 1.1/2 2.15/16 00602111/32 0.3438 1.1/2 3“ 00602223/64 0.3594 1.9/16 3.1/16 0060233/8 0.3750 1.5/8 3.1/8 00602425/64 0.3906 1.5/8 3.1/4 00602513/32 0.4062 1.5/8 3.5/16 00602627/64 0.4219 1.21/32 3.3/8 0060277/16 0.4375 1.3/4 3.7/16 00602829/64 0.4531 1.7/8 3.7/16 006029

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

15/32 0.4688 1.7/8 3.5/8 00603031/64 0.4844 2“ 3.11/16 0060311/2 0.5000 2“ 3.3/4 00603233/64 0.5156 2“ 3.7/8 00603317/32 0.5312 2“ 3.7/8 00603435/64 0.5469 2.1/8 4“ 0060359/16 0.5625 2.1/8 4“ 00603637/64 0.5781 2.1/8 4“ 00603719/32 0.5938 2.1/8 4“ 00603839/64 0.6094 2.1/8 4“ 0060395/8 0.6250 2.1/4 4.1/4 00604041/64 0.6406 2.1/4 4.1/4 00604121/32 0.6562 2.1/4 4.1/4 00604243/64 0.6719 2.1/4 4.1/4 00604311/16 0.6875 2.7/8 4.5/8 00604445/64 0.7031 2.7/8 4.5/8 00604523/32 0.7188 2.7/8 4.5/8 00604647/64 0.7344 2.7/8 4.5/8 0060473/4 0.7500 3.1/8 5“ 006048

D13Md1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

3.00 0.1181 20 50 0061303.30 0.1299 20 50 0061333.50 0.1378 20 50 0061354.00 0.1575 22 50 0061404.50 0.1772 24 55 0061454.80 0.1890 24 55 0061485.00 0.1969 24 55 0061505.50 0.2165 29 63 0061556.00 0.2362 29 63 0061606.50 0.2559 29 63 0061656.80 0.2677 34 68 0061687.00 0.2756 34 68 0061707.50 0.2953 34 68 0061758.00 0.3150 38 75 006180

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

8.50 0.3346 38 75 0061859.00 0.3543 41 80 0061909.50 0.3740 41 80 00619510.00 0.3937 41 80 00620010.20 0.4016 41 84 00620210.50 0.4134 41 84 00620510.80 0.4252 44 87 00620811.00 0.4331 44 87 00621011.50 0.4528 48 92 00621512.00 0.4724 48 92 00622012.50 0.4921 57 102 006225

● 3-Flute● Foret extra-court● Short length ● Broca extra corta

7.70 0.3031 37 79 0393215 R0227.77.80 0.3071 37 79 0393222 R0227.87.90 0.3110 37 79 0393239 R0227.9

5/16 7.94 0.3126 37 79 0422656 R0225/168.00 0.3150 37 79 0393246 R0228.08.10 0.3189 37 79 0393253 R0228.18.20 0.3228 37 79 0393260 R0228.28.30 0.3268 37 79 0393277 R0228.38.40 0.3307 37 79 0393284 R0228.4

Q 8.43 0.3319 37 79 0422892 R022Q8.50 0.3346 37 79 0393291 R0228.58.60 0.3386 40 84 0393307 R0228.6

R 8.61 0.3390 40 84 0422908 R022R8.70 0.3425 40 84 0393314 R0228.7

11/32 8.73 0.3437 40 84 0422601 R02211/328.80 0.3465 40 84 0393321 R0228.88.90 0.3504 40 84 0393338 R0228.9

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

3.00 0.1181 16 46 0392744 R0223.03.10 0.1220 18 49 0392751 R0223.1

1/8 3.18 0.1252 18 49 0422595 R0221/83.20 0.1260 18 49 0392768 R0223.2

30 3.26 0.1283 18 49 0422700 R022N303.30 0.1299 18 49 0392775 R0223.33.40 0.1339 20 52 0392782 R0223.4

29 3.45 0.1358 20 52 0422717 R022N293.50 0.1378 20 52 0392799 R0223.53.60 0.1417 20 52 0392805 R0223.63.70 0.1457 20 52 0392812 R0223.73.80 0.1496 22 55 0392829 R0223.8

25 3.80 0.1496 22 55 0422724 R022N2524 3.86 0.1520 22 55 0422731 R022N24

3.90 0.1535 22 55 0392836 R0223.95/32 3.97 0.1563 22 55 0422663 R0225/32

4.00 0.1575 22 55 0392843 R0224.020 4.04 0.1591 22 55 0422755 R022N2021 4.04 0.1591 22 55 0422748 R022N21

4.10 0.1614 22 55 0392850 R0224.14.20 0.1654 22 55 0392867 R0224.24.30 0.1693 24 58 0392874 R0224.34.40 0.1732 24 58 0392881 R0224.4

17 4.40 0.1732 24 58 0422762 R022N1716 4.50 0.1772 24 58 0422779 R022N16

4.50 0.1772 24 58 0392898 R0224.54.60 0.1811 24 58 0392904 R0224.6

14 4.62 0.1819 24 58 0422786 R022N144.70 0.1850 24 58 0392911 R0224.7

3/16 4.76 0.1874 26 62 0422632 R0223/164.80 0.1890 26 62 0392928 R0224.84.90 0.1929 26 62 0392935 R0224.9

10 4.92 0.1937 26 62 0422793 R022N109 4.98 0.1961 26 62 0422809 R022N9

5.00 0.1969 26 62 0392942 R0225.08 5.06 0.1992 26 62 0422816 R022N8

5.10 0.2008 26 62 0392959 R0225.17 5.11 0.2012 26 62 0422823 R022N7

5.20 0.2047 26 62 0392966 R0225.25.30 0.2087 26 62 0392973 R0225.35.40 0.2126 28 66 0392980 R0225.4

3 5.41 0.2130 28 66 0422830 R022N35.50 0.2165 28 66 0392997 R0225.5

7/32 5.56 0.2189 28 66 0422687 R0227/32

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

5.60 0.2205 28 66 0393000 R0225.65.70 0.2244 28 66 0393017 R0225.75.80 0.2283 28 66 0393024 R0225.8

1 5.80 0.2283 28 66 0422847 R022N15.90 0.2323 28 66 0393031 R0225.96.00 0.2362 28 66 0393048 R0226.06.10 0.2402 31 70 0393055 R0226.16.20 0.2441 31 70 0393062 R0226.2

D 6.23 0.2453 31 70 0422854 R022D6.30 0.2480 31 70 0393079 R0226.3

1/4 6.35 0.2500 31 70 0422588 R0221/46.40 0.2520 31 70 0393086 R0226.46.50 0.2559 31 70 0393093 R0226.5

F 6.53 0.2571 31 70 0422861 R022F6.60 0.2598 31 70 0393109 R0226.66.70 0.2638 31 70 0393116 R0226.76.80 0.2677 34 74 0393123 R0226.86.90 0.2717 34 74 0393130 R0226.9

I 6.91 0.2720 34 74 0422878 R022I7.00 0.2756 34 74 0393147 R0227.07.10 0.2795 34 74 0393154 R0227.1

9/32 7.14 0.2811 34 74 0422694 R0229/327.20 0.2835 34 74 0393161 R0227.27.30 0.2874 34 74 0393178 R0227.37.40 0.2913 34 74 0393185 R0227.4

M 7.49 0.2949 34 74 0422885 R022M7.50 0.2953 34 74 0393192 R0227.57.60 0.2992 37 79 0393208 R0227.6

www.precisiondormer.com■ = EXCELLENT FOR APPLICATION ● = GOOD FOR APPLICATION 15

● Foret extra-court

R022

R022

■●

● Short length ● Broca extra corta

R022 - R002

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

9.00 0.3543 40 84 0393345 R0229.0T 9.09 0.3579 40 84 0422915 R022T

9.10 0.3583 40 84 0393352 R0229.19.20 0.3622 40 84 0393369 R0229.29.30 0.3661 40 84 0393376 R0229.3

U 9.35 0.3681 40 84 0422922 R022U9.40 0.3701 40 84 0393383 R0229.49.50 0.3740 40 84 0393390 R0229.5

3/8 9.53 0.3752 43 89 0422649 R0223/89.60 0.3780 43 89 0393406 R0229.69.70 0.3819 43 89 0393413 R0229.79.80 0.3858 43 89 0393420 R0229.89.90 0.3898 43 89 0393437 R0229.9

25/64 9.92 0.3906 43 89 0422939 R02225/6410.00 0.3937 43 89 0392683 R02210.010.10 0.3976 43 89 0566817 R02210.110.20 0.4016 43 89 0392690 R02210.2

Y 10.26 0.4039 43 89 0422946 R022Y10.30 0.4055 43 89 0566824 R02210.3

13/32 10.32 0.4063 43 89 0423240 R02213/3210.40 0.4094 43 89 0566831 R02210.410.50 0.4134 43 89 0392706 R02210.510.60 0.4173 43 89 0566848 R02210.6

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

10.70 0.4213 47 95 0566855 R02210.727/64 10.72 0.4220 47 95 0422953 R02227/64

10.80 0.4252 47 95 0566862 R02210.810.90 0.4291 47 95 0566879 R02210.911.00 0.4331 47 95 0392713 R02211.011.10 0.4370 47 95 0566886 R02211.1

7/16 11.11 0.4374 47 95 0422670 R0227/1611.20 0.4409 47 95 0566893 R02211.211.30 0.4449 47 95 0566909 R02211.311.40 0.4488 47 95 0566916 R02211.411.50 0.4528 47 95 0392720 R02211.5

29/64 11.51 0.4531 47 95 0422960 R02229/6411.60 0.4567 47 95 0566923 R02211.611.70 0.4606 47 95 0566930 R02211.711.80 0.4646 47 95 0566947 R02211.811.90 0.4685 51 102 0566954 R02211.9

15/32 11.91 0.4689 51 102 0422618 R02215/3212.00 0.4724 51 102 0392737 R02212.0

31/64 12.30 0.4843 51 102 0422977 R02231/641/2 12.70 0.5000 51 102 0422571 R0221/233/64 13.10 0.5157 54 107 0422984 R02233/6417/32 13.49 0.5311 54 107 0422625 R02217/32

R002

■●

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

3.00 0.1181 21 61 0381502 R0023.03.10 0.1220 23 65 0381519 R0023.1

1/8 3.18 0.1250 23 65 0393468 R0021/83.20 0.1260 23 65 0381526 R0023.2

30 3.27 0.1285 23 65 0395738 R002N303.30 0.1299 23 65 0381533 R0023.33.40 0.1339 26 70 0381540 R0023.4

29 3.45 0.1360 26 70 0395745 R002N293.50 0.1378 26 70 0381557 R0023.53.60 0.1417 26 70 0381564 R0023.63.70 0.1457 26 70 0381571 R0023.7

25 3.80 0.1495 30 75 0395752 R002N253.80 0.1496 30 75 0381588 R0023.8

24 3.86 0.1520 30 75 0395769 R002N243.90 0.1535 30 75 0381595 R0023.9

5/32 3.97 0.1563 30 75 0393543 R0025/32

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

4.00 0.1575 30 75 0381601 R0024.021 4.04 0.1590 30 75 0395776 R002N2120 4.09 0.1610 30 75 0395783 R002N20

4.10 0.1614 30 75 0381618 R0024.14.20 0.1654 30 75 0381625 R0024.24.30 0.1693 33 80 0381632 R0024.3

17 4.40 0.1730 33 80 0395790 R002N174.40 0.1732 33 80 0381649 R0024.4

16 4.50 0.1770 33 80 0395806 R002N164.50 0.1772 33 80 0381656 R0024.54.60 0.1811 33 80 0381663 R0024.6

14 4.62 0.1820 33 80 0395813 R002N144.70 0.1850 33 80 0381670 R0024.7

3/16 4.76 0.1875 37 86 0393512 R0023/164.80 0.1890 37 86 0381687 R0024.84.90 0.1929 37 86 0381694 R0024.9



● Foret court● Standard length ● Broca , serie corta

● Short length ● Broca extra corta

R002

7.70 0.3031 60 117 0381977 R0027.77.80 0.3071 60 117 0381984 R0027.87.90 0.3110 60 117 0381991 R0027.9

5/16 7.94 0.3125 60 117 0393536 R0025/168.00 0.3150 60 117 0382004 R0028.08.10 0.3189 60 117 0382011 R0028.18.20 0.3228 60 117 0382028 R0028.28.30 0.3268 60 117 0382035 R0028.38.40 0.3307 60 117 0382042 R0028.4

Q 8.43 0.3320 60 117 0395929 R002Q8.50 0.3346 60 117 0382059 R0028.58.60 0.3386 67 125 0382066 R0028.6

R 8.61 0.3390 67 125 0395936 R002R8.70 0.3425 67 125 0382073 R0028.7

11/32 8.73 0.3437 67 125 0393475 R00211/328.80 0.3465 67 125 0382080 R0028.8

8.90 0.3504 67 125 0382097 R0028.99.00 0.3543 67 125 0382103 R0029.0

T 9.09 0.3580 67 125 0395943 R002T9.10 0.3583 67 125 0382110 R0029.19.20 0.3622 67 125 0382127 R0029.29.30 0.3661 67 125 0382134 R0029.3

U 9.35 0.3680 67 125 0395950 R002U9.40 0.3701 67 125 0382141 R0029.49.50 0.3740 67 125 0382158 R0029.5

3/8 9.53 0.3750 70 133 0393529 R0023/89.60 0.3780 70 133 0382165 R0029.69.70 0.3819 70 133 0382172 R0029.79.80 0.3858 70 133 0382189 R0029.89.90 0.3898 70 133 0382196 R0029.9

25/64 9.92 0.3906 70 133 0395967 R00225/6410.00 0.3937 70 133 0381427 R00210.010.10 0.3976 74 133 0566497 R00210.110.20 0.4016 74 133 0381434 R00210.2

Y 10.26 0.4040 74 133 0395974 R002Y10.30 0.4055 74 133 0566503 R00210.3

13/32 10.32 0.4063 74 133 0393482 R00213/3210.40 0.4094 74 133 0566510 R00210.410.50 0.4134 74 133 0381441 R00210.510.60 0.4173 74 133 0566527 R00210.610.70 0.4213 83 142 0566534 R00210.7

27/64 10.72 0.4219 83 142 0395981 R00227/6410.80 0.4252 83 142 0566541 R00210.810.90 0.4291 83 142 0566558 R00210.911.00 0.4331 83 142 0381458 R00211.011.10 0.4370 83 142 0566565 R00211.1

7/16 11.11 0.4375 83 142 0393550 R0027/1611.20 0.4409 83 142 0566572 R00211.211.30 0.4449 83 142 0566589 R00211.311.40 0.4488 83 142 0566596 R00211.411.50 0.4528 83 142 0381465 R00211.5

29/64 11.51 0.4531 83 142 0395998 R00229/6411.60 0.4567 83 142 0566602 R00211.611.70 0.4606 83 142 0566619 R00211.711.80 0.4646 83 142 0566626 R00211.811.90 0.4685 93 151 0566633 R00211.9

15/32 11.91 0.4687 93 151 0393499 R00215/3212.00 0.4724 93 151 0381472 R00212.012.10 0.4764 93 151 0566640 R00212.112.20 0.4803 93 151 0566657 R00212.212.30 0.4843 93 151 0566664 R00212.3

31/64 12.30 0.4844 93 151 0396001 R00231/6412.40 0.4882 93 151 0566671 R00212.412.50 0.4921 93 151 0566985 R00212.512.60 0.4961 93 151 0566688 R00212.6

1/2 12.70 0.5000 93 151 0393444 R0021/212.70 0.5000 93 151 0566695 R00212.712.80 0.5039 93 151 0566701 R00212.812.90 0.5079 93 151 0566718 R00212.913.00 0.5118 93 151 0381489 R00213.0

33/64 13.10 0.5156 93 151 0396018 R00233/6413.10 0.5157 93 151 0566725 R00213.113.20 0.5197 93 151 0566732 R00213.213.30 0.5236 98 160 0566749 R00213.313.40 0.5276 98 160 0566756 R00213.4

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

10 4.92 0.1935 37 86 0395820 R002N109 4.98 0.1960 37 86 0395837 R002N9

5.00 0.1969 37 86 0381700 R0025.08 5.06 0.1990 37 86 0395844 R002N8

5.10 0.2008 37 86 0381717 R0025.17 5.11 0.2010 37 86 0395851 R002N7

5.20 0.2047 37 86 0381724 R0025.25.30 0.2087 37 86 0381731 R0025.35.40 0.2126 42 93 0381748 R0025.4

3 5.41 0.2130 42 93 0395868 R002N35.50 0.2165 42 93 0381755 R0025.5

7/32 5.56 0.2187 42 93 0393567 R0027/325.60 0.2205 42 93 0381762 R0025.65.70 0.2244 42 93 0381779 R0025.7

1 5.79 0.2280 42 93 0395875 R002N15.80 0.2283 42 93 0381786 R0025.85.90 0.2323 42 93 0381793 R0025.96.00 0.2362 42 93 0381809 R0026.06.10 0.2402 47 101 0381816 R0026.16.20 0.2441 47 101 0381823 R0026.2

D 6.23 0.2460 47 101 0395882 R002D6.30 0.2480 47 101 0381830 R0026.3

1/4 6.35 0.2500 47 101 0393451 R0021/46.40 0.2520 47 101 0381847 R0026.46.50 0.2559 47 101 0381854 R0026.5

F 6.53 0.2570 47 101 0395899 R002F6.60 0.2598 47 101 0381861 R0026.66.70 0.2638 47 101 0381878 R0026.76.80 0.2677 53 109 0381885 R0026.86.90 0.2717 53 109 0381892 R0026.9

I 6.91 0.2720 53 109 0395905 R002I7.00 0.2756 53 109 0381908 R0027.07.10 0.2795 53 109 0381915 R0027.1

9/32 7.15 0.2813 53 109 0393574 R0029/327.20 0.2835 53 109 0381922 R0027.27.30 0.2874 53 109 0381939 R0027.37.40 0.2913 53 109 0381946 R0027.4

M 7.49 0.2950 53 109 0395912 R002M7.50 0.2953 53 109 0381953 R0027.57.60 0.2992 60 117 0381960 R0027.6


D12F

D12F

■●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

3/64 0.0469 1/2 1.1/2 0033551/16 0.0625 5/8 1.5/8 0033595/64 0.0781 11/16 1.11/16 0033653/32 0.0938 3/4 1.3/4 0033727/64 0.1094 13/16 1.13/16 0033791/8 0.1250 7/8 1.7/8 0033859/64 0.1406 15/16 1.15/16 0033895/32 0.1562 1“ 2.1/16 00339511/64 0.1719 1.1/16 2.1/8 0034013/16 0.1875 1.1/8 2.3/16 00340713/64 0.2031 1.3/16 2.1/4 0034147/32 0.2188 1.1/4 2.3/8 00341915/64 0.2344 1.5/16 2.7/16 0034231/4 0.2500 1.3/8 2.1/2 00342717/64 0.2656 1.7/16 2.5/8 0034309/32 0.2812 1.1/2 2.11/16 003435

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

19/64 0.2969 1.9/16 2.3/4 0034385/16 0.3125 1.5/8 2.13/16 00344021/64 0.3281 1.11/16 2.15/16 00344311/32 0.3438 1.11/16 2.15/16 00344623/64 0.3594 1.3/4 3.1/16 0034493/8 0.3750 1.13/16 3.1/8 00345125/64 0.3906 1.7/8 3.1/4 00345413/32 0.4062 1.15/16 3.5/16 00345727/64 0.4219 2“ 3.3/8 0034597/16 0.4375 2.1/16 3.7/16 00346029/64 0.4531 2.1/8 3.5/8 00346115/32 0.4688 2.1/8 3.5/8 00346231/64 0.4844 2.3/16 3.11/16 0034631/2 0.5000 2.1/4 3.3/4 003464

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

17/32 13.49 0.5313 98 160 0393505 R00217/3213.50 0.5315 98 160 0566763 R00213.513.60 0.5354 98 160 0566770 R00213.613.70 0.5394 98 160 0566787 R00213.7

d1Øh7Inch

d1Øh7mm

d1dec.Inch

l2mm

l1mm

DormerStockNo.

EDP #ore-Code

13.80 0.5433 98 160 0566794 R00213.813.90 0.5472 98 160 0566800 R00213.914.00 0.5512 98 160 0381496 R00214.0

R002


● Heavy-duty● Foret extra-court● Short lengtth ● Broca extra corta

D12W d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 1/2 1.3/8 00335059 0.0410 1/2 1.3/8 00335158 0.0420 1/2 1.3/8 00335257 0.0430 1/2 1.3/8 00335356 0.0465 1/2 1.3/8 00335455 0.0520 5/8 1.1/2 00335654 0.0550 5/8 1.1/2 00335753 0.0595 5/8 1.1/2 00335852 0.0635 11/16 1.11/16 00336051 0.0670 11/16 1.11/16 00336150 0.0700 11/16 1.11/16 00336249 0.0730 11/16 1.11/16 00336348 0.0760 11/16 1.11/16 00336447 0.0785 3/4 1.3/4 00336646 0.0810 3/4 1.3/4 00336745 0.0820 3/4 1.3/4 00336844 0.0860 3/4 1.3/4 00336943 0.0890 3/4 1.3/4 00337042 0.0935 3/4 1.3/4 00337141 0.0960 13/16 1.13/16 00337340 0.0980 13/16 1.13/16 00337439 0.0995 13/16 1.13/16 00337538 0.1015 13/16 1.13/16 00337637 0.1040 13/16 1.13/16 00337736 0.1065 13/16 1.13/16 00337835 0.1100 7/8 1.7/8 00338034 0.1110 7/8 1.7/8 00338133 0.1130 7/8 1.7/8 00338232 0.1160 7/8 1.7/8 00338331 0.1200 7/8 1.7/8 00338430 0.1285 15/16 1.15/16 00338629 0.1360 15/16 1.15/16 00338728 0.1405 15/16 1.15/16 00338827 0.1440 1“ 2.1/16 003390

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

26 0.1470 1“ 2.1/16 00339125 0.1495 1“ 2.1/16 00339224 0.1520 1“ 2.1/16 00339323 0.1540 1“ 2.1/16 00339422 0.1570 1.1/16 2.1/8 00339621 0.1590 1.1/16 2.1/8 00339720 0.1610 1.1/16 2.1/8 00339819 0.1660 1.1/16 2.1/8 00339918 0.1695 1.1/16 2.1/8 00340017 0.1730 1.1/8 2.3/16 00340216 0.1770 1.1/8 2.3/16 00340315 0.1800 1.1/8 2.3/16 00340414 0.1820 1.1/8 2.3/16 00340513 0.1850 1.1/8 2.3/16 00340612 0.1890 1.3/16 2.1/4 00340811 0.1910 1.3/16 2.1/4 00340910 0.1935 1.3/16 2.1/4 0034109 0.1960 1.3/16 2.1/4 0034118 0.1990 1.3/16 2.1/4 0034127 0.2010 1.3/16 2.1/4 0034136 0.2040 1.1/4 2.3/8 0034155 0.2055 1.1/4 2.3/8 0034164 0.2090 1.1/4 2.3/8 0034173 0.2130 1.1/4 2.3/8 0034182 0.2210 1.5/16 2.7/16 0034201 0.2280 1.5/16 2.7/16 003421

D12W● Heavy-duty

■●

● Foret extra-court● Short length ● Broca extra corta



D31F

D31F

■●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

3/64 0.0469 1/4 1.1/2 0038051/16 0.0625 5/16 1.1/2 0038095/64 0.0781 3/8 1.1/2 0038153/32 0.0938 1/2 1.1/2 0038227/64 0.1094 5/8 1.1/2 0038291/8 0.1250 5/8 1.1/2 0038359/64 0.1406 5/8 2“ 0038395/32 0.1562 5/8 2“ 00384511/64 0.1719 5/8 2“ 0038513/16 0.1875 5/8 2“ 00385713/64 0.2031 3/4 2“ 0038647/32 0.2188 3/4 2“ 00386915/64 0.2344 3/4 2“ 0038731/4 0.2500 3/4 2“ 00387717/64 0.2656 3/4 2.1/2 0038809/32 0.2812 3/4 2.1/2 003885

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

19/64 0.2969 3/4 2.1/2 0038885/16 0.3125 3/4 2.1/2 00389021/64 0.3281 1“ 2.1/2 00389311/32 0.3438 1“ 2.1/2 00389623/64 0.3594 1“ 2.1/2 0038993/8 0.3750 1“ 2.1/2 00390125/64 0.3906 1“ 2.3/4 00390413/32 0.4062 1“ 2.3/4 00390727/64 0.4219 1“ 2.3/4 0039097/16 0.4375 1“ 2.3/4 00391029/64 0.4531 1“ 3“ 00391115/32 0.4688 1“ 3“ 00391231/64 0.4844 1“ 3“ 0039131/2 0.5000 1“ 3“ 003914


D31W

D31W

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 3/16 1.1/2 00380059 0.0410 3/16 1.1/2 00380158 0.0420 3/16 1.1/2 00380257 0.0430 3/16 1.1/2 00380356 0.0465 1/4 1.1/2 00380455 0.0520 5/16 1.1/2 00380654 0.0550 5/16 1.1/2 00380753 0.0595 5/16 1.1/2 00380852 0.0635 5/16 1.1/2 00381051 0.0670 3/8 1.1/2 00381150 0.0700 3/8 1.1/2 00381249 0.0730 3/8 1.1/2 00381348 0.0760 3/8 1.1/2 00381447 0.0785 3/8 1.1/2 00381646 0.0810 1/2 1.1/2 00381745 0.0820 1/2 1.1/2 00381844 0.0860 1/2 1.1/2 00381943 0.0890 1/2 1.1/2 00382042 0.0935 1/2 1.1/2 00382141 0.0960 1/2 1.1/2 00382340 0.0980 1/2 1.1/2 00382439 0.0995 1/2 1.1/2 00382538 0.1015 1/2 1.1/2 00382637 0.1040 5/8 1.1/2 00382736 0.1065 5/8 1.1/2 00382835 0.1100 5/8 1.1/2 00383034 0.1110 5/8 1.1/2 00383133 0.1130 5/8 1.1/2 00383232 0.1160 5/8 1.1/2 00383331 0.1200 5/8 1.1/2 003834

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

30 0.1285 5/8 2“ 00383629 0.1360 5/8 2“ 00383728 0.1405 5/8 2“ 00383827 0.1440 5/8 2“ 00384026 0.1470 5/8 2“ 00384125 0.1495 5/8 2“ 00384224 0.1520 5/8 2“ 00384323 0.1540 5/8 2“ 00384422 0.1570 5/8 2“ 00384621 0.1590 5/8 2“ 00384720 0.1610 5/8 2“ 00384819 0.1660 5/8 2“ 00384918 0.1695 5/8 2“ 00385017 0.1730 5/8 2“ 00385216 0.1770 5/8 2“ 00385315 0.1800 5/8 2“ 00385414 0.1820 5/8 2“ 00385513 0.1850 5/8 2“ 00385612 0.1890 5/8 2“ 00385811 0.1910 5/8 2“ 00385910 0.1935 5/8 2“ 0038609 0.1960 3/4 2“ 0038618 0.1990 3/4 2“ 0038627 0.2010 3/4 2“ 0038636 0.2040 3/4 2“ 0038655 0.2055 3/4 2“ 0038664 0.2090 3/4 2“ 0038673 0.2130 3/4 2“ 0038682 0.2210 3/4 2“ 0038701 0.2280 3/4 2“ 003871



D33F

D33F

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/32 0.0312 3/8 1.1/8 0035013/64 0.0469 3/4 1.1/2 0035141/16 0.0625 3/4 1.1/2 0035185/64 0.0781 7/8 1.3/4 0035243/32 0.0938 1“ 2“ 0035317/64 0.1094 1.1/4 2.1/4 0035381/8 0.1250 1.1/4 2.1/4 0035449/64 0.1406 1.3/8 2.1/2 0035485/32 0.1562 1.3/8 2.1/2 00355411/64 0.1719 1.5/8 2.3/4 0035603/16 0.1875 1.5/8 2.3/4 00356613/64 0.2031 1.3/4 3“ 0035737/32 0.2188 1.3/4 3“ 00357815/64 0.2344 2“ 3.1/4 0035821/4 0.2500 2“ 3.1/4 00358617/64 0.2656 2.1/8 3.1/2 003589

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 2.1/8 3.1/2 00359419/64 0.2969 2.3/8 3.3/4 0035975/16 0.3125 2.3/8 3.3/4 00359921/64 0.3281 2.1/2 4“ 00360211/32 0.3438 2.1/2 4“ 00360523/64 0.3594 2.1/2 4.1/4 0036083/8 0.3750 2.3/4 4.1/4 00361025/64 0.3906 2.7/8 4.1/2 00361313/32 0.4062 2.7/8 4.1/2 00361627/64 0.4219 2.7/8 4.1/2 0036187/16 0.4375 2.7/8 4.1/2 00361929/64 0.4531 3“ 4.3/4 00362015/32 0.4688 3“ 4.3/4 00362131/64 0.4844 3“ 4.3/4 0036221/2 0.5000 3“ 4.3/4 003623

D33LD33L d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 2“ 3.1/4 003581B 0.2380 2“ 3.1/4 003583C 0.2420 2“ 3.1/4 003584D 0.2460 2“ 3.1/4 003585F 0.2570 2“ 3.1/4 003587G 0.2610 2.1/8 3.1/2 003588H 0.2660 2.1/8 3.1/2 003590I 0.2720 2.1/8 3.1/2 003591J 0.2770 2.1/8 3.1/2 003592K 0.2810 2.1/8 3.1/2 003593L 0.2900 2.1/8 3.1/2 003595M 0.2950 2.3/8 3.3/4 003596N 0.3020 2.3/8 3.3/4 003598O 0.3160 2.3/8 3.3/4 003600

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

P 0.3230 2.3/8 3.3/4 003601Q 0.3320 2.1/2 4“ 003603R 0.3390 2.1/2 4“ 003604S 0.3480 2.1/2 4“ 003606T 0.3580 2.1/2 4.1/4 003607U 0.3680 2.3/4 4.1/4 003609V 0.3770 2.3/4 4.1/4 003611W 0.3860 2.7/8 4.1/2 003612X 0.3970 2.7/8 4.1/2 003614Y 0.4040 2.7/8 4.1/2 003615Z 0.4130 2.7/8 4.1/2 003617


● Foret extra-court● Standard length ● Broca extra corta

D33W

D33W

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

68 0.0310 3/8 1.1/8 00350067 0.0320 3/8 1.1/8 00350266 0.0330 3/8 1.1/8 00350365 0.0350 3/8 1.1/8 00350464 0.0360 1/2 1.1/4 00350563 0.0370 1/2 1.1/4 00350662 0.0380 1/2 1.1/4 00350761 0.0390 1/2 1.1/4 00350860 0.0400 3/4 1.1/2 00350959 0.0410 3/4 1.1/2 00351058 0.0420 3/4 1.1/2 00351157 0.0430 3/4 1.1/2 00351256 0.0465 3/4 1.1/2 00351355 0.0520 3/4 1.1/2 00351554 0.0550 3/4 1.1/2 00351653 0.0595 3/4 1.1/2 00351752 0.0635 3/4 1.1/2 00351951 0.0670 3/4 1.1/2 00352050 0.0700 7/8 1.3/4 00352149 0.0730 7/8 1.3/4 00352248 0.0760 7/8 1.3/4 00352347 0.0785 7/8 1.3/4 00352546 0.0810 7/8 1.3/4 00352645 0.0820 7/8 1.3/4 00352744 0.0860 1“ 2“ 00352843 0.0890 1“ 2“ 00352942 0.0935 1“ 2“ 00353041 0.0960 1“ 2“ 00353240 0.0980 1“ 2“ 00353339 0.0995 1.1/4 2.1/4 00353438 0.1015 1.1/4 2.1/4 00353537 0.1040 1.1/4 2.1/4 00353636 0.1065 1.1/4 2.1/4 00353735 0.1100 1.1/4 2.1/4 003539

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

34 0.1110 1.1/4 2.1/4 00354033 0.1130 1.1/4 2.1/4 00354132 0.1160 1.1/4 2.1/4 00354231 0.1200 1.1/4 2.1/4 00354330 0.1285 1.1/4 2.1/4 00354529 0.1360 1.3/8 2.1/2 00354628 0.1405 1.3/8 2.1/2 00354727 0.1440 1.3/8 2.1/2 00354926 0.1470 1.3/8 2.1/2 00355025 0.1495 1.3/8 2.1/2 00355124 0.1520 1.3/8 2.1/2 00355223 0.1540 1.3/8 2.1/2 00355322 0.1570 1.3/8 2.1/2 00355521 0.1590 1.3/8 2.1/2 00355620 0.1610 1.3/8 2.1/2 00355719 0.1660 1.5/8 2.3/4 00355818 0.1695 1.5/8 2.3/4 00355917 0.1730 1.5/8 2.3/4 00356116 0.1770 1.5/8 2.3/4 00356215 0.1800 1.5/8 2.3/4 00356314 0.1820 1.5/8 2.3/4 00356413 0.1850 1.5/8 2.3/4 00356512 0.1890 1.5/8 2.3/4 00356711 0.1910 1.5/8 2.3/4 00356810 0.1935 1.5/8 2.3/4 0035699 0.1960 1.3/4 3“ 0035708 0.1990 1.3/4 3“ 0035717 0.2010 1.3/4 3“ 0035726 0.2040 1.3/4 3“ 0035745 0.2055 1.3/4 3“ 0035754 0.2090 1.3/4 3“ 0035763 0.2130 1.3/4 3“ 0035772 0.2210 1.3/4 3“ 0035791 0.2280 1.3/4 3“ 003580



D33M

D33M

■

●

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

0.80 0.0315 9.5 28.5 0034700.90 0.0354 13 32 0034711.00 0.0394 12 34 0034721.50 0.0591 18 40 0034732.00 0.0787 24 49 0034742.05 0.0807 24 49 0034752.50 0.0984 30 57 0034763.00 0.1181 33 61 0034773.30 0.1299 36 65 0036243.50 0.1378 39 70 0034784.00 0.1575 43 75 0036264.50 0.1772 47 80 0034795.00 0.1969 52 86 0036305.50 0.2165 57 93 003480

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

6.00 0.2362 57 93 0034816.50 0.2559 63 101 0034827.00 0.2756 69 109 0034837.50 0.2953 69 109 0034848.00 0.3150 75 117 0034858.50 0.3346 75 117 0034869.00 0.3543 81 125 0034879.50 0.3740 81 125 00348810.00 0.3937 87 133 00363110.50 0.4134 87 133 00348910.75 0.4232 94 142 00349011.00 0.4331 94 142 00349111.50 0.4528 94 142 00349212.00 0.4724 101 151 003493

D21

D21

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/32 0.0312 3/16 1.1/2 0032001/16 0.0625 5/16 1.1/2 0032013/32 0.0938 3/8 1.1/2 0032021/8 0.1250 7/16 1.1/2 0032035/32 0.1562 15/32 2“ 0032043/16 0.1875 9/16 2“ 0032057/32 0.2188 19/32 2“ 0032061/4 0.2500 11/16 2“ 003207

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 3/4 2.1/2 0032085/16 0.3125 7/8 2.1/2 0032093/8 0.3750 1“ 2.1/2 0032117/16 0.4375 1.1/16 2.1/2 0032131/2 0.5000 1.1/8 2.1/2 003215


● Foret extra-court● Spade drill ● Broca “spade”



● Foret à centrer

DS-90

■

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/8 0.1250 9/16 1.1/2 0033323/16 0.1875 3/4 2“ 0033341/4 0.2500 1“ 2.1/2 0033365/16 0.3125 1“ 2.1/2 003338

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

3/8 0.3750 1“ 2.1/2 0033401/2 0.5000 1.1/4 3“ 003342

DC

■●

Nr.d1Inch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

0 1/32 0.038 1.1/4 1/8 0032514 1/8 1/8 2.1/8 5/16 0032555 3/16 3/16 2.3/4 7/16 0032561 3/64 3/64 1.1/4 1/8 003252

Nr.d1Inch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

2 5/64 5/64 1.7/8 3/16 0032536 7/32 7/32 3“ 1/2 0032573 7/64 7/64 2“ 1/4 003254

● Spotting Drill ● Forets de dessoudage ● Broca para centrados

● Center Drill ● Brocas de Centrar

ProdType

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

RangeDim

LaunchLo-goDate

Cata-1.1 M111.2 M121.3 M131.4 M141.5 M151.6 M161.7 M171.8 M182.1 M212.2 M222.3 M232.4 M243.1 M313.2 M323.3 M333.4 M344.1 M414.2 M424.3 M435.1 M515.2 M525.3 M536.1 M616.2 M626.3 M636.4 M647.1 M717.2 M727.3 M737.4 M748.1 M818.2 M828.3 M839.1 M9110.1 M101


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








HS

S S

tub

Dril

ls

HSS Stub Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find Depth of Cut and other Product Features.Find the Surface Feet Per Minute (SFM) and Alpha Code. example: 279 U 279 = SFM U = Alpha Code to find your Feed Rate





7

Style:Tool Material:

Finish/Coating:Standard:

Direction of Cut:

Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:

Point Style:

26

1

2

3

1

23

4

Special Standard:

A520 A597 A927

28-29 30 31-32■187M ●184M ●121J■154M ●157M ●102J■131K ■131L ■85I■105I ■131L ■82I■69G ■115G ■69E●36E ■98G ■62E

■98I ●56F ●49F■52I ■30F ■23F■66G ●36D ●30D

■157M ■184I ●112G■121K ■157I ●98G■98J ■115G ●75E■85F ■89G ●56F■112I ●157I ■98G■66G ●95I ■59G●13B ●52E ■33C●56I ●79L ■49I●36G ●46I ■30G●23E ●33G ■20E●131E ●213H■164I ●230H■148K ●194I ●115G●66F ●164I ●102G●180I ●230E■164M ■148N■121K ●131N■115I ■157I ●98G●213G ●180J■164G ●131H■115F

PFXADX PFX


HS

S S

tub

Dril

ls

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


HS

S S

tub

Dril

lsHSS Stub Drills (con‘t)

27


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

A720 A022 QC41CO QC41G QC41 QC41PM40CO M41CO M42CO

4ASMCO EZ40G EZ41G

EZ40P EZ41P

R40C R41C R42C

4ASMR40 R41 R42

L40

33 34-35 36 37 38 39 40-41 42 43, 45 44, 45 46-48 49 50-52 53■115A ■115K ■115F ■98F ■98F ●125K ●125K ■115F ■98F ■115J ■115J ■115J ■115J■98A ■105K ■69F ■59F ■59F ●108H ●108H ■69F ■59F ■98J ■98J ■98J ■98J■89A ■82I ■75H ■69H ■66H ●98G ●98G ■75H ■66H ■89G ■89G ■89G ■89G■75A ■75H ■69F ■59F ■59F ●89G ●89G ■69F ■59F ■69G ■69G ■69G ■69G●56A ■52G ●56D ●46D ●46D ■59F ■59F ●56D ●46D ●46F ●46F ●46F ●46F●33A ●33E ■20B ■36E ■36E ●33E ●33E ●33E ●33E

●72A ■49G ●95H ●105H ●89H ●89H ■72F ■72F ●105H ●89H ■52F ■52F ■52F ■52F●33A ●26I ●56F ●59F ●49F ●49F ■36H ■36H ●59F ●46F ●30H ●30H ●30H ●30H●49A ●30E ●56D ●59D ●49D ●49D ■49D ■49D ●59D ●49D ●33D ●33D ●33D ●33D

■30D■98A ■105K ●161H ■171H ■151H ■151H ●112K ●112K ■171H ■151H ■105J ■105J ■105J ■105J■79A ■82I ●85H ■89H ■79H ■79H ●98F ●98F ■89H ■79H ■89G ■89G ■89G ■89G●66A ■66G ●85F ●95F ●85C ●79F ●72F ●72F ●95F ●79F ■66F ■66F ■66F ■66F●46A ●52G ●56D ●59D ■56F ■56F ●59D ●52F ●52F ●52F ●52F●75A ■82I ●95H ●89H ■98G ■98G ●89H ■89G ■89G ■89G ■89G●56A ●46F ●49F ●49F ■59F ■59F ●49F ●52E ●52E ●52E ●52E●26A ●26C ■20D ■33C ■33C ●26C ●26C ●26C ●26C●33A ●43H ●59H ●49F ●49F ■49H ■49H ●59H ●49F ●43H ●43H ●43H ●43H●23A ●26F ■20B ■30F ■30F ●26F ●26F ●26F ●26F●13A ●13B ●10B ■20C ■20C ●13B ●13B ●13B ●13B●115A ●118H ■98I ●89I ●125I ●125I ■98I ■89I ●118H ●118H ●118H ●118H●131A ●125K ■89H ●79H ●131K ●131K ■89H ■85H ●125J ●125J ●125J ●125J●115A ●89I ■89H ●79H ●89J ●89J ■89H ■79H ●89I ●89I ●89I ●89I●89A ●52I ●52I ●52I ●52H ●52H ●52H ●52H●115A ■131F ●351H ●115K ●115K ■400H ■351H ●108K ●108K ●108K ●108K●98A ■105K ●325H ●108J ●108J ■351H ■325H ●98J ●98J ●98J ●98J●89A ■105J ●102I ●102I ●98I ●98I ●98I ●98I●89A ●82J ●276H ●98G ●98G ■315H ■276H ●82I ●82I ●82I ●82I●157A ●98K ●115M ●115M ●98K ●98K ●98K ●98K●82A ●115I ●92K ●92K ●115I ●115I ●115I ●115I

●56G ●56I ●56I ●56G ●56G ●56G ●56G●13C ■20C ■20C ●13C ●13C ●13C ●13C



● Foret extra-court ADX ● Broca ADX , serie extra corta

A520

A520

■

●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

1lmm Stock #

EDP #ore-Code

3.00 0.1181 16 46 0038901 A5203.03.10 0.1220 18 49 0038918 A5203.1

1/8 3.18 0.1250 18 49 0171264 A5201/83.20 0.1259 18 49 0038925 A5203.23.30 0.1299 18 49 0038932 A5203.33.40 0.1338 20 52 0038949 A5203.43.50 0.1377 20 52 0038956 A5203.5

9/64 3.57 0.1405 20 52 0171271 A5209/643.60 0.1417 20 52 0038963 A5203.63.70 0.1456 20 52 0038970 A5203.73.80 0.1496 22 55 0038987 A5203.83.90 0.1535 22 55 0038994 A5203.9

5/32 3.97 0.1562 22 55 0171288 A5205/324.00 0.1574 22 55 0039007 A5204.04.10 0.1614 22 55 0039014 A5204.14.20 0.1653 22 55 0039021 A5204.24.30 0.1692 24 58 0039038 A5204.3

11/64 4.37 0.1720 24 58 0171295 A52011/644.40 0.1732 24 58 0039045 A5204.44.50 0.1771 24 58 0039052 A5204.54.60 0.1811 24 58 0039069 A5204.64.70 0.1850 24 58 0039076 A5204.7

3/16 4.76 0.1874 26 62 0171301 A5203/164.80 0.1889 26 62 0039083 A5204.84.90 0.1929 26 62 0039090 A5204.95.00 0.1968 26 62 0039106 A5205.05.10 0.2007 26 62 0039113 A5205.1

13/64 5.16 0.2031 26 62 0171318 A52013/645.20 0.2047 26 62 0039120 A5205.25.30 0.2086 26 62 0039137 A5205.35.40 0.2125 28 66 0039144 A5205.45.50 0.2165 28 66 0039151 A5205.5

7/32 5.56 0.2188 28 66 0171325 A5207/325.60 0.2204 28 66 0039168 A5205.65.70 0.2244 28 66 0039175 A5205.75.80 0.2283 28 66 0039182 A5205.8

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

1lmm Stock #

EDP #ore-Code

5.90 0.2322 28 66 0039199 A5205.915/64 5.95 0.2342 28 66 0171332 A52015/64

6.00 0.2362 28 66 0039205 A5206.06.10 0.2401 31 70 0039212 A5206.16.20 0.2440 31 70 0039229 A5206.26.30 0.2480 31 70 0039236 A5206.3

1/4 6.35 0.2500 31 70 0171349 A5201/46.40 0.2519 31 70 0039243 A5206.46.50 0.2559 31 70 0039250 A5206.56.60 0.2598 31 70 0039267 A5206.66.70 0.2637 31 70 0039274 A5206.7

17/64 6.75 0.2657 34 74 0171356 A52017/646.80 0.2677 34 74 0039281 A5206.86.90 0.2716 34 74 0039298 A5206.97.00 0.2755 34 74 0039304 A5207.07.10 0.2795 34 74 0039311 A5207.1

9/32 7.14 0.2811 34 74 0171363 A5209/327.20 0.2834 34 74 0039328 A5207.27.30 0.2874 34 74 0039335 A5207.37.40 0.2913 34 74 0039342 A5207.47.50 0.2952 34 74 0039359 A5207.5

19/64 7.54 0.2968 37 79 0171370 A52019/647.60 0.2992 37 79 0039366 A5207.67.70 0.3031 37 79 0039373 A5207.77.80 0.3070 37 79 0039380 A5207.87.90 0.3110 37 79 0039397 A5207.9

5/16 7.94 0.3125 37 79 0171387 A5205/168.00 0.3149 37 79 0039403 A5208.08.10 0.3188 37 79 0039410 A5208.18.20 0.3228 37 79 0039427 A5208.28.30 0.3267 37 79 0039434 A5208.3

21/64 8.33 0.3279 37 79 0171394 A52021/648.40 0.3307 37 79 0039441 A5208.48.50 0.3346 37 79 0039458 A5208.58.60 0.3385 40 84 0039465 A5208.68.70 0.3425 40 84 0039472 A5208.7

● ADX stub drill


A520d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

11/32 8.73 0.3437 40 84 0171400 A52011/328.80 0.3464 40 84 0039489 A5208.88.90 0.3503 40 84 0039496 A5208.99.00 0.3543 40 84 0039502 A5209.09.10 0.3582 40 84 0039519 A5209.1

23/64 9.13 0.3594 40 84 0171417 A52023/649.20 0.3622 40 84 0039526 A5209.29.30 0.3661 40 84 0039533 A5209.39.40 0.3700 40 84 0039540 A5209.49.50 0.3740 40 84 0039557 A5209.5

3/8 9.53 0.3750 43 89 0171424 A5203/89.60 0.3779 43 89 0039564 A5209.69.70 0.3818 43 89 0039571 A5209.79.80 0.3858 43 89 0039588 A5209.89.90 0.3897 43 89 0039595 A5209.9

25/64 9.92 0.3905 43 89 0171431 A52025/6410.00 0.3937 43 89 0038598 A52010.010.10 0.3976 43 89 0038604 A52010.110.20 0.4015 43 89 0038611 A52010.210.30 0.4055 43 89 0038628 A52010.3

13/32 10.32 0.4062 43 89 0171448 A52013/3210.40 0.4094 43 89 0038635 A52010.410.50 0.4133 43 89 0038642 A52010.510.60 0.4173 43 89 0038659 A52010.610.70 0.4212 47 95 0038666 A52010.7

27/64 10.72 0.4220 47 95 0171455 A52027/6410.80 0.4251 47 95 0038673 A52010.810.90 0.4291 47 95 0038680 A52010.9

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

11.00 0.4330 47 95 0038697 A52011.011.10 0.4370 47 95 0038703 A52011.1

7/16 11.11 0.4374 47 95 0171462 A5207/1611.20 0.4409 47 95 0038710 A52011.211.30 0.4448 47 95 0038727 A52011.311.40 0.4488 47 95 0038734 A52011.411.50 0.4527 47 95 0038741 A52011.5

29/64 11.51 0.4531 47 95 0171479 A52029/6411.60 0.4566 47 95 0038758 A52011.611.70 0.4606 47 95 0038765 A52011.711.80 0.4645 47 95 0038772 A52011.811.90 0.4685 51 102 0038789 A52011.9

15/32 11.91 0.4688 51 102 0171486 A52015/3212.00 0.4724 51 102 0038796 A52012.012.10 0.4763 51 102 0038802 A52012.112.20 0.4803 51 102 0038819 A52012.212.30 0.4842 51 102 0038826 A52012.3

31/64 12.30 0.4842 51 102 0171493 A52031/6412.40 0.4881 51 102 0038833 A52012.412.50 0.4921 51 102 0038840 A52012.512.60 0.4960 51 102 0038857 A52012.612.70 0.5000 51 102 0038864 A52012.7

1/2 12.70 0.5000 51 102 0171509 A5201/212.80 0.5039 51 102 0038871 A52012.812.90 0.5078 51 102 0038888 A52012.913.00 0.5118 51 102 0038895 A52013.0


d1Øh8mm

d1dec.Inch

l2 mm

l1 mm

Stock #

EDP # or e-Code

2.50 0.0984 14 43 0125557 A5972.52.60 0.1023 14 43 0125564 A5972.63.00 0.1181 16 46 0125571 A5973.03.10 0.1220 18 49 0587645 A5973.13.20 0.1259 18 49 0587652 A5973.23.30 0.1299 18 49 0125588 A5973.33.40 0.1338 20 52 0125595 A5973.43.50 0.1377 20 52 0125601 A5973.53.60 0.1417 20 52 0587669 A5973.63.70 0.1456 20 52 0587676 A5973.73.80 0.1496 22 55 0587683 A5973.83.90 0.1535 22 55 0587690 A5973.94.00 0.1574 22 55 0125618 A5974.04.10 0.1614 22 55 0125625 A5974.14.20 0.1653 22 55 0125632 A5974.24.30 0.1692 24 58 0125649 A5974.34.40 0.1732 24 58 0587706 A5974.44.50 0.1771 24 58 0125656 A5974.54.60 0.1811 24 58 0587713 A5974.64.70 0.1850 24 58 0587720 A5974.74.80 0.1889 26 62 0587737 A5974.84.90 0.1929 26 62 0125663 A5974.95.00 0.1968 26 62 0125670 A5975.05.10 0.2007 26 62 0125687 A5975.15.20 0.2047 26 62 0587744 A5975.25.30 0.2086 26 62 0587751 A5975.35.40 0.2125 28 66 0587768 A5975.45.50 0.2165 28 66 0125694 A5975.55.60 0.2204 28 66 0587775 A5975.65.70 0.2244 28 66 0587782 A5975.75.80 0.2283 28 66 0587799 A5975.85.90 0.2322 28 66 0587805 A5975.96.00 0.2362 28 66 0125700 A5976.06.10 0.2401 31 70 0587812 A5976.16.20 0.2440 31 70 0587829 A5976.26.30 0.2480 31 70 0587836 A5976.36.40 0.2519 31 70 0587843 A5976.46.50 0.2559 31 70 0125717 A5976.56.60 0.2598 31 70 0587850 A5976.66.70 0.2637 31 70 0587867 A5976.76.80 0.2677 34 74 0125724 A5976.86.90 0.2716 34 74 0125731 A5976.97.00 0.2755 34 74 0125748 A5977.07.10 0.2795 34 74 0587874 A5977.17.20 0.2834 34 74 0587881 A5977.27.30 0.2874 34 74 0587898 A5977.3

10.00 0.3937 43 89 0125465 A59710.010.20 0.4015 43 89 0125472 A59710.210.30 0.4055 43 89 0125489 A59710.310.40 0.4094 43 89 0125496 A59710.410.50 0.4133 43 89 0125502 A59710.510.80 0.4251 47 95 0587522 A59710.811.00 0.4330 50 95 0125519 A59711.0 2)

11.20 0.4409 50 95 0587539 A59711.2 2)

11.50 0.4527 50 95 0125526 A59711.5 2)

11.80 0.4645 50 95 0587546 A59711.8 2)

12.00 0.4724 57 102 0125533 A59712.0 2)

12.20 0.4803 57 102 0125540 A59712.2 2)

12.50 0.4921 57 102 0587553 A59712.5 2)

12.80 0.5039 57 102 0587560 A59712.8 2)

13.00 0.5118 57 102 0587577 A59713.0 2)

13.50 0.5314 62 107 0587584 A59713.5 2)

14.00 0.5511 62 107 0587591 A59714.0 2)

14.50 0.5708 62 111 0587607 A59714.5 2)

15.00 0.5905 63 111 0587614 A59715.0 2)

15.50 0.6102 63 115 0587621 A59715.5 2)

16.00 0.6299 67 115 0587638 A59716.0 2)

A597

A597

■ ●

d1Øh8mm

d1dec.Inch

l2 mm

l1 mm

Stock #

EDP # or e-Code

7.40 0.2913 34 74 0587904 A5977.47.50 0.2952 34 74 0125755 A5977.57.60 0.2992 37 79 0587911 A5977.67.70 0.3031 37 79 0587928 A5977.77.80 0.3070 37 79 0587935 A5977.87.90 0.3110 37 79 0587942 A5977.98.00 0.3149 37 79 0125762 A5978.08.10 0.3188 37 79 0587959 A5978.18.20 0.3228 37 79 0587966 A5978.28.30 0.3267 37 79 0587973 A5978.38.40 0.3307 37 79 0587980 A5978.48.50 0.3346 37 79 0125779 A5978.58.60 0.3385 40 84 0125786 A5978.68.70 0.3425 40 84 0125793 A5978.78.80 0.3464 40 84 0587997 A5978.88.90 0.3503 40 84 0588000 A5978.99.00 0.3543 40 84 0125809 A5979.09.10 0.3582 40 84 0588017 A5979.19.20 0.3622 40 84 0588024 A5979.29.30 0.3661 40 84 0588031 A5979.39.40 0.3700 40 84 0588048 A5979.49.50 0.3740 40 84 0125816 A5979.59.60 0.3779 43 89 0588055 A5979.69.70 0.3818 43 89 0588062 A5979.79.80 0.3858 43 89 0588079 A5979.89.90 0.3897 43 89 0588086 A5979.9

2) Overall lengths longer than standards

● PFX stub drill ● Foret PFX extra-court ● Broca PFX Extra Corta


A927

A927

■

●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

1.00 0.0393 6 26 0147382 A9271.01.10 0.0433 7 28 0147399 A9271.11.20 0.0472 8 30 0147405 A9271.21.30 0.0511 8 30 0147412 A9271.31.40 0.0551 9 32 0147429 A9271.41.50 0.0590 9 32 0147436 A9271.5

1/16 1.59 0.0625 10 34 0174357 A9271/161.60 0.0629 10 34 0147443 A9271.61.70 0.0669 10 34 0147450 A9271.71.80 0.0708 11 36 0147467 A9271.81.90 0.0748 11 36 0147474 A9271.9

5/64 1.98 0.0779 12 38 0174364 A9275/642.00 0.0787 12 38 0147481 A9272.02.10 0.0826 12 38 0147498 A9272.12.20 0.0866 13 40 0147504 A9272.22.30 0.0905 13 40 0147511 A9272.3

3/32 2.38 0.0937 14 43 0174371 A9273/322.40 0.0944 14 43 0147528 A9272.42.50 0.0984 14 43 0147535 A9272.52.60 0.1023 14 43 0147542 A9272.62.70 0.1062 16 46 0147559 A9272.7

7/64 2.78 0.1094 16 46 0174388 A9277/642.80 0.1102 16 46 0147566 A9272.82.90 0.1141 16 46 0147573 A9272.93.00 0.1181 16 46 0147580 A9273.03.10 0.1220 18 49 0147597 A9273.1

1/8 3.18 0.1251 18 49 0174395 A9271/83.20 0.1259 18 49 0147603 A9273.23.30 0.1299 18 49 0147610 A9273.33.40 0.1338 20 52 0147627 A9273.43.50 0.1377 20 52 0147634 A9273.5

9/64 3.57 0.1405 20 52 0174401 A9279/643.60 0.1417 20 52 0147641 A9273.63.70 0.1456 20 52 0147658 A9273.73.80 0.1496 22 55 0147665 A9273.83.90 0.1535 22 55 0147672 A9273.9

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

5/32 3.97 0.1562 22 55 0174418 A9275/324.00 0.1574 22 55 0147689 A9274.04.10 0.1614 22 55 0147696 A9274.14.20 0.1653 22 55 0147702 A9274.24.30 0.1692 24 58 0147719 A9274.3

11/64 4.37 0.1720 24 58 0174425 A92711/644.40 0.1732 24 58 0147726 A9274.44.50 0.1771 24 58 0147733 A9274.54.60 0.1811 24 58 0147740 A9274.64.70 0.1850 24 58 0147757 A9274.7

3/16 4.76 0.1874 26 62 0174432 A9273/164.80 0.1889 26 62 0147764 A9274.84.90 0.1929 26 62 0147771 A9274.95.00 0.1968 26 62 0147788 A9275.05.10 0.2007 26 62 0147795 A9275.1

13/64 5.16 0.2031 26 62 0174449 A92713/645.20 0.2047 26 62 0147801 A9275.25.30 0.2086 26 62 0147818 A9275.35.40 0.2125 28 66 0147825 A9275.45.50 0.2165 28 66 0147832 A9275.5

7/32 5.56 0.2188 28 66 0174456 A9277/325.60 0.2204 28 66 0147849 A9275.65.70 0.2244 28 66 0147856 A9275.75.80 0.2283 28 66 0147863 A9275.85.90 0.2322 28 66 0147870 A9275.9

15/64 5.95 0.2342 28 66 0174463 A92715/646.00 0.2362 28 66 0147887 A9276.06.10 0.2401 31 70 0147894 A9276.16.20 0.2440 31 70 0147900 A9276.26.30 0.2480 31 70 0147917 A9276.3

1/4 6.35 0.2500 31 70 0174470 A9271/46.40 0.2519 31 70 0147924 A9276.46.50 0.2559 31 70 0147931 A9276.56.60 0.2598 31 70 0147948 A9276.66.70 0.2637 31 70 0147955 A9276.7

17/64 6.75 0.2657 34 74 0174487 A92717/64

● PFX stub drill ● Foret PFX extra-court ● Broca PFX Extra Corta


A927d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

6.80 0.2677 34 74 0147962 A9276.86.90 0.2716 34 74 0147979 A9276.97.00 0.2755 34 74 0147986 A9277.07.10 0.2795 34 74 0147993 A9277.1

9/32 7.14 0.2811 34 74 0174494 A9279/327.20 0.2834 34 74 0148006 A9277.27.30 0.2874 34 74 0148013 A9277.37.40 0.2913 34 74 0148020 A9277.47.50 0.2952 34 74 0148037 A9277.5

19/64 7.54 0.2968 37 79 0174500 A92719/647.60 0.2992 37 79 0148044 A9277.67.70 0.3031 37 79 0148051 A9277.77.80 0.3070 37 79 0148068 A9277.87.90 0.3110 37 79 0148075 A9277.9

5/16 7.94 0.3125 37 79 0174517 A9275/168.00 0.3149 37 79 0148082 A9278.08.10 0.3188 37 79 0148099 A9278.18.20 0.3228 37 79 0148105 A9278.28.30 0.3267 37 79 0148112 A9278.3

21/64 8.33 0.3279 37 79 0174524 A92721/648.40 0.3307 37 79 0148129 A9278.48.50 0.3346 37 79 0148136 A9278.58.60 0.3385 40 84 0148143 A9278.68.70 0.3425 40 84 0148150 A9278.7

11/32 8.73 0.3437 40 84 0174531 A92711/328.80 0.3464 40 84 0148167 A9278.88.90 0.3503 40 84 0148174 A9278.99.00 0.3543 40 84 0148181 A9279.09.10 0.3582 40 84 0148198 A9279.1

23/64 9.13 0.3594 40 84 0174548 A92723/649.20 0.3622 40 84 0148204 A9279.29.30 0.3661 40 84 0148211 A9279.39.40 0.3700 40 84 0148228 A9279.49.50 0.3740 40 84 0148235 A9279.5

3/8 9.53 0.3751 43 89 0174555 A9273/89.60 0.3779 43 89 0148242 A9279.69.70 0.3818 43 89 0148259 A9279.79.80 0.3858 43 89 0148266 A9279.8

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

9.90 0.3897 43 89 0148273 A9279.925/64 9.92 0.3905 43 89 0174562 A92725/64

10.00 0.3937 43 89 0148280 A92710.010.20 0.4015 43 89 0148297 A92710.210.30 0.4055 43 89 0148303 A92710.3

13/32 10.32 0.4062 43 89 0174579 A92713/3210.40 0.4094 43 89 0148310 A92710.410.50 0.4133 43 89 0148327 A92710.5

27/64 10.72 0.4220 50 95 0174586 A92727/64 2)

10.80 0.4251 50 95 0148334 A92710.8 2)

11.00 0.4330 50 95 0148341 A92711.0 2)

7/16 11.11 0.4374 50 95 0174593 A9277/16 2)

11.20 0.4409 50 95 0148358 A92711.2 2)

11.50 0.4527 50 95 0148365 A92711.5 2)

29/64 11.51 0.4531 50 95 0174609 A92729/64 2)

11.80 0.4645 50 95 0148372 A92711.8 2)

15/32 11.91 0.4688 57 102 0174616 A92715/32 2)

12.00 0.4724 57 102 0148389 A92712.0 2)

12.20 0.4803 57 102 0148396 A92712.2 2)

31/64 12.30 0.4842 57 102 0174623 A92731/64 2)

12.50 0.4921 57 102 0148402 A92712.5 2)

1/2 12.70 0.5000 57 102 0174630 A9271/2 2)

12.80 0.5039 57 102 0148419 A92712.8 2)

13.00 0.5118 57 102 0148426 A92713.0 2)

13.50 0.5314 62 107 0302804 A92713.5 2)

14.00 0.5511 62 107 0308516 A92714.0 2)

14.50 0.5708 62 107 0302811 A92714.5 2)

15.00 0.5905 63 111 0302828 A92715.0 2)

15.50 0.6102 63 111 0302835 A92715.5 2)

16.00 0.6299 67 115 0302842 A92716.0 2)

17.00 0.6692 71 119 0302859 A92717.0 2)

17.50 0.6889 75 123 0588437 A92717.5 2)

18.00 0.7086 75 123 0302866 A92718.0 2)

19.00 0.7480 79 127 0302873 A92719.0 2)

20.00 0.7874 81 131 0302880 A92720.0 2)

2) Overall lengths longer than standards


A720

■●

d1Ømm

d1dec.Inch

l2mm

l1mm

d2Øh8mm Stock #

EDP #ore-Code

0.15 0.0059 1.0 25 1 0044988 A720.150.16 0.0063 1.4 25 1 0566961 A720.160.17 0.0067 1.4 25 1 0612057 A720.170.18 0.0070 1.4 25 1 0044995 A720.180.20 0.0078 1.8 25 1 0045008 A720.20.22 0.0086 1.8 25 1 0045015 A720.220.25 0.0098 2.2 25 1 0045022 A720.250.27 0.0106 2.2 25 1 0566978 A720.270.28 0.0110 2.2 25 1 0045039 A720.280.30 0.0118 2.2 25 1 0045046 A720.30.35 0.0137 2.8 25 1 0045053 A720.350.38 0.0149 2.8 25 1 0045060 A720.380.39 0.0154 3.6 25 1 0045077 A720.390.40 0.0157 3.6 25 1 0045084 A720.40.45 0.0177 3.6 25 1 0045107 A720.450.50 0.0196 4.0 25 1 0045114 A720.5

d1Ømm

d1dec.Inch

l2mm

l1mm

d2Øh8mm Stock #

EDP #ore-Code

0.55 0.0217 4.5 25 1 0612064 A720.550.60 0.0236 4.5 25 1 0045121 A720.60.62 0.0244 5.0 25 1 0612071 A720.620.65 0.0256 5.0 25 1 0612088 A720.650.70 0.0276 5.6 25 1 0615577 A720.70.75 0.0295 5.6 25 1 0612101 A720.750.80 0.0315 6.3 25 1.5 0615584 A720.80.85 0.0335 6.3 25 1.5 0612125 A720.850.90 0.0354 7.1 25 1.5 0615591 A720.90.95 0.0374 7.1 25 1.5 0612149 A720.951.00 0.0394 8.0 25 1.5 0615607 A7201.01.05 0.0413 8.0 25 1.5 0612163 A7201.051.10 0.0433 9.0 25 1.5 0615614 A7201.11.20 0.0472 10.0 25 1.5 0615621 A7201.21.30 0.0512 10.0 25 1.5 0615638 A7201.31.40 0.0551 11.2 25 1.5 0615645 A7201.4

A720

● Micro drill ● Micro foret ● Micro Broca



A022

A022

■

●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

0.50 0.0196 3 20 0600382 A022.50.60 0.0236 3.5 21 0600399 A022.60.70 0.0275 4.5 23 0600405 A022.7

1/32 0.79 0.0312 13 35 0600542 A0221/320.80 0.0314 5 24 0600412 A022.80.90 0.0354 5.5 25 0600429 A022.91.00 0.0393 6 26 0600436 A0221.01.10 0.0433 7 28 0600443 A0221.1

3/64 1.19 0.0468 13 35 0600559 A0223/641.20 0.0472 8 30 0600450 A0221.21.30 0.0511 8 30 0600467 A0221.31.40 0.0551 9 32 0600474 A0221.41.50 0.0590 9 32 0600481 A0221.5

1/16 1.59 0.0625 16 41 0600535 A0221/161.60 0.0629 10 34 0600498 A0221.61.70 0.0669 10 34 0600504 A0221.71.80 0.0708 11 36 0600511 A0221.81.90 0.0748 11 36 0600528 A0221.9

5/64 1.98 0.0779 17 43 0600566 A0225/642.00 0.0787 12 38 0600115 A0222.02.10 0.0826 12 38 0600122 A0222.12.20 0.0866 13 40 0600139 A0222.22.25 0.0885 13 40 0600146 A0222.252.30 0.0905 13 40 0600153 A0222.3

3/32 2.38 0.0937 20 45 0600238 A0223/322.40 0.0944 14 43 0600160 A0222.42.50 0.0984 14 43 0600177 A0222.52.60 0.1023 14 43 0600184 A0222.62.65 0.1043 14 43 0600191 A0222.652.70 0.1062 16 46 0600207 A0222.7

7/64 2.78 0.1094 22 47 0600245 A0227/642.80 0.1102 16 46 0600214 A0222.82.90 0.1141 16 46 0600221 A0222.93.00 0.1181 16 46 0588697 A0223.03.10 0.1220 18 49 0589083 A0223.1

1/8 3.18 0.1251 23 49 0588727 A0221/8

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

3.20 0.1259 18 49 0589090 A0223.23.25 0.1279 18 49 0589106 A0223.253.30 0.1299 18 49 0589113 A0223.33.40 0.1338 20 52 0589120 A0223.43.50 0.1377 20 52 0589137 A0223.5

9/64 3.57 0.1405 25 50 0589878 A0229/643.60 0.1417 20 52 0589144 A0223.63.70 0.1456 20 52 0589151 A0223.73.80 0.1496 22 55 0589168 A0223.83.90 0.1535 22 55 0589175 A0223.9

5/32 3.97 0.1562 26 53 0589410 A0225/324.00 0.1574 22 55 0589205 A0224.04.10 0.1614 22 55 0589212 A0224.14.20 0.1653 22 55 0589229 A0224.24.30 0.1692 24 58 0589236 A0224.3

11/64 4.37 0.1720 28 55 0588932 A02211/644.40 0.1732 24 58 0589243 A0224.44.50 0.1771 24 58 0589250 A0224.54.60 0.1811 24 58 0589267 A0224.64.70 0.1850 24 58 0589274 A0224.7

3/16 4.76 0.1874 30 57 0589182 A0223/164.80 0.1889 26 62 0589281 A0224.84.90 0.1929 26 62 0589298 A0224.95.00 0.1968 26 62 0589304 A0225.05.10 0.2007 26 62 0589311 A0225.1

13/64 5.16 0.2031 31 58 0589014 A02213/645.20 0.2047 26 62 0589328 A0225.25.30 0.2086 26 62 0589335 A0225.35.40 0.2125 28 66 0589342 A0225.45.50 0.2165 28 66 0589359 A0225.5

7/32 5.56 0.2188 33 61 0589649 A0227/325.60 0.2204 28 66 0589366 A0225.65.70 0.2244 28 66 0589373 A0225.75.80 0.2283 28 66 0589380 A0225.85.90 0.2322 28 66 0589397 A0225.9

15/64 5.95 0.2342 34 63 0589069 A02215/64

● Stub drill ● Broca extra corta

Bright below 2.0 mm, TiN Tipped and split point 2.0 mm and above


A022d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

6.00 0.2362 28 66 0589434 A0226.06.10 0.2401 31 70 0589441 A0226.16.20 0.2440 31 70 0589458 A0226.26.30 0.2480 31 70 0589465 A0226.3

1/4 6.35 0.2500 36 65 0588710 A0221/46.40 0.2519 31 70 0589472 A0226.46.50 0.2559 31 70 0589489 A0226.56.60 0.2598 31 70 0589496 A0226.66.70 0.2637 31 70 0589502 A0226.76.80 0.2677 34 74 0589519 A0226.86.90 0.2716 34 74 0589526 A0226.97.00 0.2755 34 74 0589533 A0227.07.10 0.2795 34 74 0589540 A0227.1

9/32 7.14 0.2811 40 70 0589861 A0229/327.20 0.2834 34 74 0589557 A0227.27.30 0.2874 34 74 0589564 A0227.37.40 0.2913 34 74 0589571 A0227.47.50 0.2952 34 74 0589588 A0227.57.60 0.2992 37 79 0589595 A0227.67.70 0.3031 37 79 0589601 A0227.77.80 0.3070 37 79 0589618 A0227.87.90 0.3110 37 79 0589625 A0227.9

5/16 7.94 0.3125 43 73 0589403 A0225/168.00 0.3149 37 79 0589656 A0228.08.10 0.3188 37 79 0589663 A0228.18.20 0.3228 37 79 0589670 A0228.28.30 0.3267 37 79 0589687 A0228.38.40 0.3307 37 79 0589694 A0228.48.50 0.3346 37 79 0589700 A0228.58.60 0.3385 40 84 0589717 A0228.68.70 0.3425 40 84 0589724 A0228.7

11/32 8.73 0.3437 45 78 0588925 A02211/328.80 0.3464 40 84 0589731 A0228.88.90 0.3503 40 84 0589748 A0228.99.00 0.3543 40 84 0589755 A0229.09.10 0.3582 40 84 0589762 A0229.19.20 0.3622 40 84 0589779 A0229.29.30 0.3661 40 84 0589786 A0229.39.40 0.3700 40 84 0589793 A0229.49.50 0.3740 40 84 0589809 A0229.5

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

3/8 9.53 0.3751 48 81 0589199 A0223/89.60 0.3779 43 89 0589816 A0229.69.70 0.3818 43 89 0589823 A0229.79.80 0.3858 43 89 0589830 A0229.89.90 0.3897 43 89 0589847 A0229.910.00 0.3937 43 89 0588734 A02210.010.10 0.3976 43 89 0588741 A02210.110.20 0.4015 43 89 0588758 A02210.210.30 0.4055 43 89 0588765 A02210.3

13/32 10.32 0.4062 51 86 0589007 A02213/3210.40 0.4094 43 89 0588772 A02210.410.50 0.4133 43 89 0588789 A02210.510.60 0.4173 43 89 0588796 A02210.610.70 0.4212 47 95 0588802 A02210.710.80 0.4251 47 95 0588819 A02210.810.90 0.4291 47 95 0588826 A02210.911.00 0.4330 47 95 0588833 A02211.011.10 0.4370 47 95 0588840 A02211.1

7/16 11.11 0.4374 54 89 0589632 A0227/1611.20 0.4409 47 95 0588857 A02211.211.30 0.4448 47 95 0588864 A02211.311.50 0.4527 47 95 0588871 A02211.511.60 0.4566 47 95 0588888 A02211.611.70 0.4606 47 95 0588895 A02211.711.80 0.4645 47 95 0588901 A02211.811.90 0.4685 51 102 0588918 A02211.912.00 0.4724 51 102 0588949 A02212.012.10 0.4763 51 102 0588956 A02212.112.20 0.4803 51 102 0588963 A02212.212.50 0.4921 51 102 0588970 A02212.5

1/2 12.70 0.5000 60 98 0588703 A0221/213.00 0.5118 51 102 0588987 A02213.013.50 0.5314 54 107 0588994 A02213.514.00 0.5511 54 107 0589021 A02214.0

9/16 14.29 0.5625 67 105 0589854 A0229/1614.50 0.5708 56 111 0589038 A02214.515.00 0.5905 56 111 0589045 A02215.015.50 0.6102 58 115 0589052 A02215.5

5/8 15.88 0.6251 73 111 0589427 A0225/816.00 0.6299 58 115 0589076 A02216.0



QC41CO

QC41CO

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0601045/64 0.0781 11/16 1.11/16 0601053/32 0.0938 3/4 1.3/4 06010640 0.0980 13/16 1.13/16 06024039 0.0995 13/16 1.13/16 06023938 0.1015 13/16 1.13/16 06023837 0.1040 13/16 1.13/16 06023736 0.1065 13/16 1.13/16 0602367/64 0.1094 13/16 1.13/16 06010735 0.1100 7/8 1.7/8 06023534 0.1110 7/8 1.7/8 06023433 0.1130 7/8 1.7/8 06023332 0.1160 7/8 1.7/8 06023231 0.1200 7/8 1.7/8 0602311/8 0.1250 7/8 1.7/8 06010830 0.1285 15/16 1.15/16 06023029 0.1360 15/16 1.15/16 06022928 0.1405 15/16 1.15/16 0602289/64 0.1406 15/16 1.15/16 06010927 0.1440 1“ 2.1/16 06022726 0.1470 1“ 2.1/16 06022625 0.1495 1“ 2.1/16 06022524 0.1520 1“ 2.1/16 06022423 0.1540 1“ 2.1/16 0602235/32 0.1562 1“ 2.1/16 06011022 0.1570 1.1/16 2.1/8 06022221 0.1590 1.1/16 2.1/8 06022120 0.1610 1.1/16 2.1/8 06022019 0.1660 1.1/16 2.1/8 06021918 0.1695 1.1/16 2.1/8 06021811/64 0.1719 1.1/16 2.1/8 06011117 0.1730 1.1/8 2.3/16 06021716 0.1770 1.1/8 2.3/16 06021615 0.1800 1.1/8 2.3/16 060215

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

14 0.1820 1.1/8 2.3/16 06021413 0.1850 1.1/8 2.3/16 0602133/16 0.1875 1.1/8 2.3/16 06011212 0.1890 1.3/16 2.1/4 06021211 0.1910 1.3/16 2.1/4 06021110 0.1935 1.3/16 2.1/4 0602109 0.1960 1.3/16 2.1/4 0602098 0.1990 1.3/16 2.1/4 0602087 0.2010 1.3/16 2.1/4 06020713/64 0.2031 1.3/16 2.1/4 0601136 0.2040 1.1/4 2.3/8 0602065 0.2055 1.1/4 2.3/8 0602054 0.2090 1.1/4 2.3/8 0602043 0.2130 1.1/4 2.3/8 0602037/32 0.2188 1.1/4 2.3/8 0601142 0.2210 1.5/16 2.7/16 0602021 0.2280 1.5/16 2.7/16 06020115/64 0.2344 1.5/16 2.7/16 0601151/4 0.2500 1.3/8 2.1/2 06011617/64 0.2656 1.7/16 2.5/8 0601179/32 0.2812 1.1/2 2.11/16 06011819/64 0.2969 1.9/16 2.3/4 0601195/16 0.3125 1.5/8 2.13/16 06012021/64 0.3281 1.11/16 2.15/16 06012111/32 0.3438 1.11/16 3“ 06012223/64 0.3594 1.3/4 3.1/16 0601233/8 0.3750 1.13/16 3.1/8 06012425/64 0.3906 1.7/8 3.1/4 06012513/32 0.4062 1.15/16 3.5/16 06012627/64 0.4219 2“ 3.3/8 0601277/16 0.4375 2.1/16 3.7/16 06012829/64 0.4531 2.1/8 3.9/16 06012915/32 0.4688 2.1/8 3.5/8 06013031/64 0.4844 2.3/16 3.11/16 0601311/2 0.5000 2.1/4 3.3/4 060132

● Stub drill ● Broca extra corta● Wide-land parabolic flute



QC41G

QC41G

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0623045/64 0.0781 11/16 1.11/16 0623053/32 0.0938 3/4 1.3/4 06230640 0.0980 13/16 1.13/16 06144039 0.0995 13/16 1.13/16 06143938 0.1015 13/16 1.13/16 06143837 0.1040 13/16 1.13/16 06143736 0.1065 13/16 1.13/16 0614367/64 0.1094 13/16 1.13/16 06230735 0.1100 7/8 1.7/8 06143534 0.1110 7/8 1.7/8 06143433 0.1130 7/8 1.7/8 06143332 0.1160 7/8 1.7/8 06143231 0.1200 7/8 1.7/8 0614311/8 0.1250 7/8 1.7/8 06230830 0.1285 15/16 1.15/16 06143029 0.1360 15/16 1.15/16 06142928 0.1405 15/16 1.15/16 0614289/64 0.1406 15/16 1.15/16 06230927 0.1440 1“ 2.1/16 06142726 0.1470 1“ 2.1/16 06142625 0.1495 1“ 2.1/16 06142524 0.1520 1“ 2.1/16 06142423 0.1540 1“ 2.1/16 0614235/32 0.1562 1“ 2.1/16 06231022 0.1570 1.1/16 2.1/8 06142221 0.1590 1.1/16 2.1/8 06142120 0.1610 1.1/16 2.1/8 06142019 0.1660 1.1/16 2.1/8 06141918 0.1695 1.1/16 2.1/8 06141811/64 0.1719 1.1/16 2.1/8 06231117 0.1730 1.1/8 2.3/16 06141716 0.1770 1.1/8 2.3/16 06141615 0.1800 1.1/8 2.3/16 061415

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

14 0.1820 1.1/8 2.3/16 06141413 0.1850 1.1/8 2.3/16 0614133/16 0.1875 1.1/8 2.3/16 06231212 0.1890 1.3/16 2.1/4 06141211 0.1910 1.3/16 2.1/4 06141110 0.1935 1.3/16 2.1/4 0614109 0.1960 1.3/16 2.1/4 0614098 0.1990 1.3/16 2.1/4 0614087 0.2010 1.3/16 2.1/4 06140713/64 0.2031 1.3/16 2.1/4 0623136 0.2040 1.1/4 2.3/8 0614065 0.2055 1.1/4 2.3/8 0614054 0.2090 1.1/4 2.3/8 0614043 0.2130 1.1/4 2.3/8 0614037/32 0.2188 1.1/4 2.3/8 0623142 0.2210 1.5/16 2.7/16 0614021 0.2280 1.5/16 2.7/16 06140115/64 0.2344 1.5/16 2.7/16 0623151/4 0.2500 1.3/8 2.1/2 06231617/64 0.2656 1.7/16 2.5/8 0623179/32 0.2812 1.1/2 2.11/16 06231819/64 0.2969 1.9/16 2.3/4 0623195/16 0.3125 1.5/8 2.13/16 06232021/64 0.3281 1.11/16 2.15/16 06232111/32 0.3438 1.11/16 3“ 06232223/64 0.3594 1.3/4 3.1/16 0623233/8 0.3750 1.13/16 3.1/8 06232425/64 0.3906 1.7/8 3.1/4 06232513/32 0.4062 1.15/16 3.5/16 06232627/64 0.4219 2“ 3.3/8 0623277/16 0.4375 2.1/16 3.7/16 06232829/64 0.4531 2.1/8 3.9/16 06232915/32 0.4688 2.1/8 3.5/8 06233031/64 0.4844 2.3/16 3.3/4 0623311/2 0.5000 2.1/4 3.3/4 062332




QC41

QC41

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0557045/64 0.0781 11/16 1.11/16 0557053/32 0.0938 3/4 1.3/4 05570640 0.0980 13/16 1.13/16 05604039 0.0995 13/16 1.13/16 05603938 0.1015 13/16 1.13/16 05603837 0.1040 13/16 1.13/16 05603736 0.1065 13/16 1.13/16 0560367/64 0.1094 13/16 1.13/16 05570735 0.1100 7/8 1.7/8 05603534 0.1110 7/8 1.7/8 05603433 0.1130 7/8 1.7/8 05603332 0.1160 7/8 1.7/8 05603231 0.1200 7/8 1.7/8 0560311/8 0.1250 7/8 1.7/8 05570830 0.1285 15/16 1.15/16 05603029 0.1360 15/16 1.15/16 05602928 0.1405 15/16 1.15/16 0560289/64 0.1406 15/16 1.15/16 05570927 0.1440 1“ 2.1/16 05602726 0.1470 1“ 2.1/16 05602625 0.1495 1“ 2.1/16 05602524 0.1520 1“ 2.1/16 05602423 0.1540 1“ 2.1/16 0560235/32 0.1562 1“ 2.1/16 05571022 0.1570 1.1/16 2.1/8 05602221 0.1590 1.1/16 2.1/8 05602120 0.1610 1.1/16 2.1/8 05602019 0.1660 1.1/16 2.1/8 05601918 0.1695 1.1/16 2.1/8 05601811/64 0.1719 1.1/16 2.1/8 05571117 0.1730 1.1/8 2.3/16 05601716 0.1770 1.1/8 2.3/16 05601615 0.1800 1.1/8 2.3/16 056015

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

14 0.1820 1.1/8 2.3/16 05601413 0.1850 1.1/8 2.3/16 0560133/16 0.1875 1.1/8 2.3/16 05571212 0.1890 1.3/16 2.1/4 05601211 0.1910 1.3/16 2.1/4 05601110 0.1935 1.3/16 2.1/4 0560109 0.1960 1.3/16 2.1/4 0560098 0.1990 1.3/16 2.1/4 0560087 0.2010 1.3/16 2.1/4 05600713/64 0.2031 1.3/16 2.1/4 0557136 0.2040 1.1/4 2.3/8 0560065 0.2055 1.1/4 2.3/8 0560054 0.2090 1.1/4 2.3/8 0560043 0.2130 1.1/4 2.3/8 0560037/32 0.2188 1.1/4 2.3/8 0557142 0.2210 1.5/16 2.7/16 0560021 0.2280 1.5/16 2.7/16 05600115/64 0.2344 1.5/16 2.7/16 0557151/4 0.2500 1.3/8 2.1/2 05571617/64 0.2656 1.7/16 2.5/8 0557179/32 0.2812 1.1/2 2.11/16 05571819/64 0.2969 1.9/16 2.3/4 0557195/16 0.3125 1.5/8 2.13/16 05572021/64 0.3281 1.11/16 2.15/16 05572111/32 0.3438 1.11/16 3“ 05572223/64 0.3594 1.3/4 3.1/16 0557233/8 0.3750 1.13/16 3.1/8 05572425/64 0.3906 1.7/8 3.1/4 05572513/32 0.4062 1.15/16 3.5/16 05572627/64 0.4219 2“ 3.3/8 0557277/16 0.4375 2.1/16 3.7/16 05572829/64 0.4531 2.1/8 3.9/16 05572915/32 0.4688 2.1/8 3.5/8 05573031/64 0.4844 2.3/16 3.3/4 0557311/2 0.5000 2.1/4 3.3/4 055732




1/2 0.5000 2.1/4 3.3/4 05833233/64 0.5156 2.3/8 3.7/8 05833317/32 0.5312 2.3/8 3.7/8 05833435/64 0.5469 2.1/2 4“ 0583359/16 0.5625 2.1/2 4“ 05833637/64 0.5781 2.5/8 4.1/8 05833719/32 0.5938 2.5/8 4.1/8 05833839/64 0.6094 2.3/4 4.1/4 0583395/8 0.6250 2.3/4 4.1/4 05834041/64 0.6406 2.7/8 4.1/2 05834121/32 0.6562 2.7/8 4.1/2 05834243/64 0.6719 2.7/8 4.5/8 05834311/16 0.6875 2.7/8 4.5/8 058344

QC41P

QC41P

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0583045/64 0.0781 11/16 1.11/16 0583053/32 0.0938 3/4 1.3/4 05830640 0.0980 13/16 1.13/16 06004039 0.0995 13/16 1.13/16 06003938 0.1015 13/16 1.13/16 06003837 0.1040 13/16 1.13/16 06003736 0.1065 13/16 1.13/16 0600367/64 0.1094 13/16 1.13/16 05830735 0.1100 7/8 1.7/8 06003534 0.1110 7/8 1.7/8 06003433 0.1130 7/8 1.7/8 06003332 0.1160 7/8 1.7/8 06003231 0.1200 7/8 1.7/8 0600311/8 0.1250 7/8 1.7/8 05830830 0.1285 15/16 1.15/16 06003029 0.1360 15/16 1.15/16 06002928 0.1405 15/16 1.15/16 0600289/64 0.1406 15/16 1.15/16 05830927 0.1440 1“ 2.1/16 06002726 0.1470 1“ 2.1/16 06002625 0.1495 1“ 2.1/16 06002524 0.1520 1“ 2.1/16 06002423 0.1540 1“ 2.1/16 0600235/32 0.1562 1“ 2.1/16 05831022 0.1570 1.1/16 2.1/8 06002221 0.1590 1.1/16 2.1/8 06002120 0.1610 1.1/16 2.1/8 06002019 0.1660 1.1/16 2.1/8 06001918 0.1695 1.1/16 2.1/8 06001811/64 0.1719 1.1/16 2.1/8 05831117 0.1730 1.1/8 2.3/16 06001716 0.1770 1.1/8 2.3/16 06001615 0.1800 1.1/8 2.3/16 06001514 0.1820 1.1/8 2.3/16 06001413 0.1850 1.1/8 2.3/16 0600133/16 0.1875 1.1/8 2.3/16 05831212 0.1890 1.3/16 2.1/4 06001211 0.1910 1.3/16 2.1/4 06001110 0.1935 1.3/16 2.1/4 0600109 0.1960 1.3/16 2.1/4 0600098 0.1990 1.3/16 2.1/4 0600087 0.2010 1.3/16 2.1/4 06000713/64 0.2031 1.3/16 2.1/4 058313

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

6 0.2040 1.1/4 2.3/8 0600065 0.2055 1.1/4 2.3/8 0600054 0.2090 1.1/4 2.3/8 0600043 0.2130 1.1/4 2.3/8 0600037/32 0.2188 1.1/4 2.3/8 0583142 0.2210 1.5/16 2.7/16 0600021 0.2280 1.5/16 2.7/16 06000115/64 0.2344 1.5/16 2.7/16 0583151/4 0.2500 1.3/8 2.1/2 05831617/64 0.2656 1.7/16 2.5/8 0583179/32 0.2812 1.1/2 2.11/16 05831819/64 0.2969 1.9/16 2.3/4 0583195/16 0.3125 1.5/8 2.13/16 05832021/64 0.3281 1.11/16 2.15/16 05832111/32 0.3438 1.11/16 3“ 05832223/64 0.3594 1.3/4 3.1/16 0583233/8 0.3750 1.13/16 3.1/8 05832425/64 0.3906 1.7/8 3.1/4 05832513/32 0.4062 1.15/16 3.5/16 05832627/64 0.4219 2“ 3.3/8 0583277/16 0.4375 2.1/16 3.7/16 05832829/64 0.4531 2.1/8 3.9/16 05832915/32 0.4688 2.1/8 3.5/8 05833031/64 0.4844 2.3/16 3.3/4 058331



M42CO d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 1.5/16 2.7/16 042301B 0.2380 1.3/8 2.1/2 042302C 0.2420 1.3/8 2.1/2 042303D 0.2460 1.3/8 2.1/2 042304E 0.2500 1.3/8 2.1/2 042305F 0.2570 1.7/16 2.5/8 042306G 0.2610 1.7/16 2.5/8 042307H 0.2660 1.1/2 2.11/16 042308I 0.2720 1.1/2 2.11/16 042309J 0.2770 1.1/2 2.11/16 042310K 0.2810 1.1/2 2.11/16 042311L 0.2900 1.9/16 2.3/4 042312M 0.2950 1.9/16 2.3/4 042313N 0.3020 1.5/8 2.13/16 042314

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 1.11/16 2.15/16 042315P 0.3230 1.11/16 2.15/16 042316Q 0.3320 1.11/16 3“ 042317R 0.3390 1.11/16 3“ 042318S 0.3480 1.3/4 3.1/16 042319T 0.3580 1.3/4 3.1/16 042320U 0.3680 1.13/16 3.1/8 042321V 0.3770 1.7/8 3.1/4 042322W 0.3860 1.7/8 3.1/4 042323X 0.3970 1.15/16 3.5/16 042324Y 0.4040 1.15/16 3.5/16 042325Z 0.4130 2“ 3.3/8 042326

M40CO - M42CO

M40CO

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0403045/64 0.0781 11/16 1.11/16 0403053/32 0.0938 3/4 1.3/4 0403067/64 0.1094 13/16 1.13/16 0403071/8 0.1250 7/8 1.7/8 0403089/64 0.1406 15/16 1.15/16 0403095/32 0.1562 1“ 2.1/16 04031011/64 0.1719 1.1/16 2.1/8 0403113/16 0.1875 1.1/8 2.3/16 04031213/64 0.2031 1.3/16 2.1/4 0403137/32 0.2188 1.1/4 2.3/8 04031415/64 0.2344 1.5/16 2.7/16 0403151/4 0.2500 1.3/8 2.1/2 04031617/64 0.2656 1.7/16 2.5/8 0403179/32 0.2812 1.1/2 2.11/16 04031819/64 0.2969 1.9/16 2.3/4 0403195/16 0.3125 1.5/8 2.13/16 04032021/64 0.3281 1.11/16 2.15/16 04032111/32 0.3438 1.11/16 3“ 04032223/64 0.3594 1.3/4 3.1/16 0403233/8 0.3750 1.13/16 3.1/8 04032425/64 0.3906 1.7/8 3.1/4 04032513/32 0.4062 1.15/16 3.5/16 04032627/64 0.4219 2“ 3.3/8 040327

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

7/16 0.4375 2.1/16 3.7/16 04032829/64 0.4531 2.1/8 3.9/16 04032915/32 0.4688 2.1/8 3.5/8 04033031/64 0.4844 2.3/16 3.11/16 0403311/2 0.5000 2.1/4 3.3/4 04033233/64 0.5156 2.3/8 3.7/8 04603317/32 0.5312 2.3/8 3.7/8 04603435/64 0.5469 2.1/2 4“ 0460359/16 0.5625 2.1/2 4“ 04603637/64 0.5781 2.5/8 4.1/8 04603719/32 0.5938 2.5/8 4.1/8 04603839/64 0.6094 2.3/4 4.1/4 0460395/8 0.6250 2.3/4 4.1/4 04604041/64 0.6406 2.7/8 4.1/2 04604121/32 0.6562 2.7/8 4.1/2 04604243/64 0.6719 2.7/8 4.5/8 04604311/16 0.6875 2.7/8 4.5/8 04604445/64 0.7031 3“ 4.3/4 04604523/32 0.7188 3“ 4.3/4 04604647/64 0.7344 3.1/8 5“ 0460473/4 0.7500 3.1/8 5“ 046048

● Stub drill ● Foret extra-court ● Broca extra corta


M41CO● Stub drill ● Broca extra corta

M41CO

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 1/2 1.3/8 041360 1)

59 0.0410 1/2 1.3/8 041359 1)

58 0.0420 1/2 1.3/8 041358 1)

57 0.0430 1/2 1.3/8 041357 1)

56 0.0465 1/2 1.3/8 041356 1)

55 0.0520 5/8 1.5/8 041355 1)

54 0.0550 5/8 1.5/8 041354 1)

53 0.0595 5/8 1.5/8 041353 1)

52 0.0635 11/16 1.11/16 04135251 0.0670 11/16 1.11/16 04135150 0.0700 11/16 1.11/16 04135049 0.0730 11/16 1.11/16 04134948 0.0760 11/16 1.11/16 04134847 0.0785 11/16 1.11/16 04134746 0.0810 3/4 1.3/4 04134645 0.0820 3/4 1.3/4 04134544 0.0860 3/4 1.3/4 04134443 0.0890 3/4 1.3/4 04134342 0.0935 3/4 1.3/4 04134241 0.0960 13/16 1.13/16 04134140 0.0980 13/16 1.13/16 04134039 0.0995 13/16 1.13/16 04133938 0.1015 13/16 1.13/16 04133837 0.1040 13/16 1.13/16 04133736 0.1065 13/16 1.13/16 04133635 0.1100 7/8 1.7/8 04133534 0.1110 7/8 1.7/8 04133433 0.1130 7/8 1.7/8 04133332 0.1160 7/8 1.7/8 04133231 0.1200 7/8 1.7/8 041331

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

30 0.1285 15/16 1.15/16 04133029 0.1360 15/16 1.15/16 04132928 0.1405 15/16 1.15/16 04132827 0.1440 1“ 2.1/16 04132726 0.1470 1“ 2.1/16 04132625 0.1495 1“ 2.1/16 04132524 0.1520 1“ 2.1/16 04132423 0.1540 1“ 2.1/16 04132322 0.1570 1.1/16 2.1/8 04132221 0.1590 1.1/16 2.1/8 04132120 0.1610 1.1/16 2.1/8 04132019 0.1660 1.1/16 2.1/8 04131918 0.1695 1.1/16 2.1/8 04131817 0.1730 1.1/8 2.3/16 04131716 0.1770 1.1/8 2.3/16 04131615 0.1800 1.1/8 2.3/16 04131514 0.1820 1.1/8 2.3/16 04131413 0.1850 1.1/8 2.3/16 04131312 0.1890 1.3/16 2.1/4 04131211 0.1910 1.3/16 2.1/4 04131110 0.1935 1.3/16 2.1/4 0413109 0.1960 1.3/16 2.1/4 0413098 0.1990 1.3/16 2.1/4 0413087 0.2010 1.3/16 2.1/4 0413076 0.2040 1.1/4 2.3/8 0413065 0.2055 1.1/4 2.3/8 0413054 0.2090 1.1/4 2.3/8 0413043 0.2130 1.1/4 2.3/8 0413032 0.2210 1.5/16 2.7/16 0413021 0.2280 1.5/16 2.7/16 041301


1) Not a split point


4ASMCO

4ASMCO

■●

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

2.30 0.0906 13 40 0322302.50 0.0984 14 43 0322503.00 0.1181 16 46 0323003.10 0.1220 18 49 0323103.20 0.1260 18 49 0323203.30 0.1299 18 49 0323303.40 0.1339 20 52 0323403.50 0.1378 20 52 0323503.60 0.1417 20 52 0323603.70 0.1457 20 52 0323704.00 0.1575 22 55 0324004.10 0.1614 22 55 0324104.20 0.1654 22 55 0324204.70 0.1850 24 58 0324704.80 0.1890 26 62 0324804.90 0.1929 26 62 0324905.00 0.1969 26 62 0325005.10 0.2008 26 62 032510

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

5.50 0.2165 28 66 0325505.70 0.2244 28 66 0325706.00 0.2362 28 66 0326006.40 0.2520 31 70 0326406.50 0.2559 31 70 0326506.80 0.2677 34 74 0326807.00 0.2756 34 74 0327008.00 0.3150 37 79 0328008.50 0.3346 37 79 0328509.50 0.3740 40 84 0329509.80 0.3858 43 89 03298010.00 0.3937 43 89 03300010.20 0.4016 43 89 03300210.50 0.4134 43 89 03300511.00 0.4331 47 95 03311011.20 0.4409 47 95 03311211.50 0.4528 47 95 03311512.00 0.4724 51 102 033200

● Stub drill ● Foret extra-court ● Broca extra corta



EZ40G● Stub drill ● Broca extra corta

EZ40G

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0425045/64 0.0781 11/16 1.11/16 0425053/32 0.0938 3/4 1.3/4 0425067/64 0.1094 13/16 1.13/16 0425071/8 0.1250 7/8 1.7/8 0425089/64 0.1406 15/16 1.15/16 0425095/32 0.1562 1“ 2.1/16 04251011/64 0.1719 1.1/16 2.1/8 0425113/16 0.1875 1.1/8 2.3/16 04251213/64 0.2031 1.3/16 2.1/4 0425137/32 0.2188 1.1/4 2.3/8 04251415/64 0.2344 1.5/16 2.7/16 0425151/4 0.2500 1.3/8 2.1/2 04251617/64 0.2656 1.7/16 2.5/8 0425179/32 0.2812 1.1/2 2.11/16 04251819/64 0.2969 1.9/16 2.3/4 042519

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 1.5/8 2.13/16 04252021/64 0.3281 1.11/16 2.15/16 04252111/32 0.3438 1.11/16 3“ 04252223/64 0.3594 1.3/4 3.1/16 0425233/8 0.3750 1.13/16 3.1/8 04252425/64 0.3906 1.7/8 3.1/4 04252513/32 0.4062 1.15/16 3.5/16 04252627/64 0.4219 2“ 3.3/8 0425277/16 0.4375 2.1/16 3.7/16 04252829/64 0.4531 2.1/8 3.9/16 04252915/32 0.4688 2.1/8 3.5/8 04253031/64 0.4844 2.3/16 3.11/16 0425311/2 0.5000 2.1/4 3.3/4 042532

● Parabolic flute ● Goujure parabolique ● Canal Parabólico


EZ40P

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0436045/64 0.0781 11/16 1.11/16 0436053/32 0.0938 3/4 1.3/4 0436067/64 0.1094 13/16 1.13/16 0436071/8 0.1250 7/8 1.7/8 0436089/64 0.1406 15/16 1.15/16 0436095/32 0.1562 1“ 2.1/16 04361011/64 0.1719 1.1/16 2.1/8 0436113/16 0.1875 1.1/8 2.3/16 04361213/64 0.2031 1.3/16 2.1/4 0436137/32 0.2188 1.1/4 2.3/8 04361415/64 0.2344 1.5/16 2.7/16 0436151/4 0.2500 1.3/8 2.1/2 04361617/64 0.2656 1.7/16 2.5/8 0436179/32 0.2812 1.1/2 2.11/16 04361819/64 0.2969 1.9/16 2.3/4 043619

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 1.5/8 2.13/16 04362021/64 0.3281 1.11/16 2.15/16 04362111/32 0.3438 1.11/16 3“ 04362223/64 0.3594 1.3/4 3.1/16 0436233/8 0.3750 1.13/16 3.1/8 04362425/64 0.3906 1.7/8 3.1/4 04362513/32 0.4062 1.15/16 3.5/16 04362627/64 0.4219 2“ 3.3/8 0436277/16 0.4375 2.1/16 3.7/16 04362829/64 0.4531 2.1/8 3.9/16 04362915/32 0.4688 2.1/8 3.5/8 04363031/64 0.4844 2.3/16 3.11/16 0436311/2 0.5000 2.1/4 3.3/4 043632

■

●

EZ40P● Foret extra-court● Stub drill ● Broca extra corta

● Parabolic flute ● Goujure parabolique ● Canal Parabólico


d1 d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

40 0.0980 13/16 1.13/16 04374039 0.0995 13/16 1.13/16 04373938 0.1015 13/16 1.13/16 04373837 0.1040 13/16 1.13/16 043737

d1 d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

36 0.1065 13/16 1.13/16 04373635 0.1100 7/8 1.7/8 04373534 0.1110 7/8 1.7/8 04373433 0.1130 7/8 1.7/8 043733

EZ41P

■ ●

d1 d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

40 0.0980 13/16 1.13/16 04264039 0.0995 13/16 1.13/16 04263938 0.1015 13/16 1.13/16 04263837 0.1040 13/16 1.13/16 04263736 0.1065 13/16 1.13/16 04263635 0.1100 7/8 1.7/8 04263534 0.1110 7/8 1.7/8 04263433 0.1130 7/8 1.7/8 04263332 0.1160 7/8 1.7/8 04263231 0.1200 7/8 1.7/8 04263130 0.1285 15/16 1.15/16 04263029 0.1360 15/16 1.15/16 04262928 0.1405 15/16 1.15/16 04262827 0.1440 1“ 2.1/16 04262726 0.1470 1“ 2.1/16 04262625 0.1495 1“ 2.1/16 04262524 0.1520 1“ 2.1/16 04262423 0.1540 1“ 2.1/16 04262322 0.1570 1.1/16 2.1/8 04262221 0.1590 1.1/16 2.1/8 042621

d1 d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

20 0.1610 1.1/16 2.1/8 04262019 0.1660 1.1/16 2.1/8 04261918 0.1695 1.1/16 2.1/8 04261817 0.1730 1.1/8 2.3/16 04261716 0.1770 1.1/8 2.3/16 04261615 0.1800 1.1/8 2.3/16 04261514 0.1820 1.1/8 2.3/16 04261413 0.1850 1.1/8 2.3/16 04261312 0.1890 1.3/16 2.1/4 04261211 0.1910 1.3/16 2.1/4 04261110 0.1935 1.3/16 2.1/4 0426109 0.1960 1.3/16 2.1/4 0426098 0.1990 1.3/16 2.1/4 0426087 0.2010 1.3/16 2.1/4 0426076 0.2040 1.1/4 2.3/8 0426065 0.2055 1.1/4 2.3/8 0426054 0.2090 1.1/4 2.3/8 0426043 0.2130 1.1/4 2.3/8 0426032 0.2210 1.5/16 2.7/16 0426021 0.2280 1.5/16 2.7/16 042601

EZ41G

EZ41G

●

■

● Foret extra-court● Stub drill ● Broca extra corta● Parabolic flute ● Goujure parabolique ● Canal Parabólico

● Foret extra-court● Stub Drill ● Broca extra corta

EZ41P



R40C

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0408045/64 0.0781 11/16 1.11/16 0408053/32 0.0938 3/4 1.3/4 0408067/64 0.1094 13/16 1.13/16 0408071/8 0.1250 7/8 1.7/8 0408089/64 0.1406 15/16 1.15/16 0408095/32 0.1562 1“ 2.1/16 04081011/64 0.1719 1.1/16 2.1/8 0408113/16 0.1875 1.1/8 2.3/16 04081213/64 0.2031 1.3/16 2.1/4 0408137/32 0.2188 1.1/4 2.3/8 04081415/64 0.2344 1.5/16 2.7/16 0408151/4 0.2500 1.3/8 2.1/2 04081617/64 0.2656 1.7/16 2.5/8 040817

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 1.1/2 2.11/16 04081819/64 0.2969 1.9/16 2.3/4 0408195/16 0.3125 1.5/8 2.13/16 04082021/64 0.3281 1.11/16 2.15/16 04082111/32 0.3438 1.11/16 3“ 04082223/64 0.3594 1.3/4 3.1/16 0408233/8 0.3750 1.13/16 3.1/8 04082425/64 0.3906 1.7/8 3.1/4 04082513/32 0.4062 1.15/16 3.5/16 04082627/64 0.4219 2“ 3.3/8 0408277/16 0.4375 2.1/16 3.7/16 04082829/64 0.4531 2.1/8 3.9/16 04082915/32 0.4688 2.1/8 3.5/8 04083031/64 0.4844 2.3/16 3.11/16 0408311/2 0.5000 2.1/4 3.3/4 040832

● Stub Drill, Type C ● Broca extra corta

d1 d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

32 0.1160 7/8 1.7/8 04373231 0.1200 7/8 1.7/8 04373130 0.1285 15/16 1.15/16 04373029 0.1360 15/16 1.15/16 04372928 0.1405 15/16 1.15/16 04372827 0.1440 1“ 2.1/16 04372726 0.1470 1“ 2.1/16 04372625 0.1495 1“ 2.1/16 04372524 0.1520 1“ 2.1/16 04372423 0.1540 1“ 2.1/16 04372322 0.1570 1.1/16 2.1/8 04372221 0.1590 1.1/16 2.1/8 04372120 0.1610 1.1/16 2.1/8 04372019 0.1660 1.1/16 2.1/8 04371918 0.1695 1.1/16 2.1/8 04371817 0.1730 1.1/8 2.3/16 043717

d1 d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

16 0.1770 1.1/8 2.3/16 04371615 0.1800 1.1/8 2.3/16 04371514 0.1820 1.1/8 2.3/16 04371413 0.1850 1.1/8 2.3/16 04371312 0.1890 1.3/16 2.1/4 04371211 0.1910 1.3/16 2.1/4 04371110 0.1935 1.3/16 2.1/4 0437109 0.1960 1.3/16 2.1/4 0437098 0.1990 1.3/16 2.1/4 0437087 0.2010 1.3/16 2.1/4 0437076 0.2040 1.1/4 2.3/8 0437065 0.2055 1.1/4 2.3/8 0437054 0.2090 1.1/4 2.3/8 0437043 0.2130 1.1/4 2.3/8 0437032 0.2210 1.5/16 2.7/16 0437021 0.2280 1.5/16 2.7/16 043701

EZ41P

R40C



R41C

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 1/2 1.3/8 041860 1)

59 0.0410 1/2 1.3/8 041859 1)

58 0.0420 1/2 1.3/8 041858 1)

57 0.0430 1/2 1.3/8 041857 1)

56 0.0465 1/2 1.3/8 041856 1)

55 0.0520 5/8 1.5/8 041855 1)

54 0.0550 5/8 1.5/8 041854 1)

53 0.0595 5/8 1.5/8 041853 1)

52 0.0635 11/16 1.11/16 04185251 0.0670 11/16 1.11/16 04185150 0.0700 11/16 1.11/16 04185049 0.0730 11/16 1.11/16 04184948 0.0760 11/16 1.11/16 04184847 0.0785 11/16 1.11/16 04184746 0.0810 3/4 1.3/4 04184645 0.0820 3/4 1.3/4 04184544 0.0860 3/4 1.3/4 04184443 0.0890 3/4 1.3/4 04184342 0.0935 3/4 1.3/4 04184241 0.0960 13/16 1.13/16 04184140 0.0980 13/16 1.13/16 04184039 0.0995 13/16 1.13/16 04183938 0.1015 13/16 1.13/16 04183837 0.1040 13/16 1.13/16 04183736 0.1065 13/16 1.13/16 04183635 0.1100 7/8 1.7/8 04183534 0.1110 7/8 1.7/8 04183433 0.1130 7/8 1.7/8 04183332 0.1160 7/8 1.7/8 04183231 0.1200 7/8 1.7/8 041831

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

30 0.1285 15/16 1.15/16 04183029 0.1360 15/16 1.15/16 04182928 0.1405 15/16 1.15/16 04182827 0.1440 1“ 2.1/16 04182726 0.1470 1“ 2.1/16 04182625 0.1495 1“ 2.1/16 04182524 0.1520 1“ 2.1/16 04182423 0.1540 1“ 2.1/16 04182322 0.1570 1.1/16 2.1/8 04182221 0.1590 1.1/16 2.1/8 04182120 0.1610 1.1/16 2.1/8 04182019 0.1660 1.1/16 2.1/8 04181918 0.1695 1.1/16 2.1/8 04181817 0.1730 1.1/8 2.3/16 04181716 0.1770 1.1/8 2.3/16 04181615 0.1800 1.1/8 2.3/16 04181514 0.1820 1.1/8 2.3/16 04181413 0.1850 1.1/8 2.3/16 04181312 0.1890 1.3/16 2.1/4 04181211 0.1910 1.3/16 2.1/4 04181110 0.1935 1.3/16 2.1/4 0418109 0.1960 1.3/16 2.1/4 0418098 0.1990 1.3/16 2.1/4 0418087 0.2010 1.3/16 2.1/4 0418076 0.2040 1.1/4 2.3/8 0418065 0.2055 1.1/4 2.3/8 0418054 0.2090 1.1/4 2.3/8 0418043 0.2130 1.1/4 2.3/8 0418032 0.2210 1.5/16 2.7/16 0418021 0.2280 1.5/16 2.7/16 041801

R41C● Stub drill ● Broca extra corta


● Type C



R42C● Stub drill ● Broca extra corta

R42C

■

●

d1 Ø

d1dec.Inch

l2Inch

l1 Inch

EDP #ore-Code

A 0.2340 1.5/16 2.7/16 042801B 0.2380 1.3/8 2.1/2 042802C 0.2420 1.3/8 2.1/2 042803D 0.2460 1.3/8 2.1/2 042804E 0.2500 1.3/8 2.1/2 042805F 0.2570 1.7/16 2.5/8 042806G 0.2610 1.7/16 2.5/8 042807H 0.2660 1.1/2 2.11/16 042808I 0.2720 1.1/2 2.11/16 042809J 0.2770 1.1/2 2.11/16 042810K 0.2810 1.1/2 2.11/16 042811L 0.2900 1.9/16 2.3/4 042812M 0.2950 1.9/16 2.3/4 042813N 0.3020 1.5/8 2.13/16 042814

d1 Ø

d1dec.Inch

l2Inch

l1 Inch

EDP #ore-Code

O 0.3160 1.11/16 2.15/16 042815P 0.3230 1.11/16 2.15/16 042816Q 0.3320 1.11/16 3“ 042817R 0.3390 1.11/16 3“ 042818S 0.3480 1.3/4 3.1/16 042819T 0.3580 1.3/4 3.1/16 042820U 0.3680 1.13/16 3.1/8 042821V 0.3770 1.7/8 3.1/4 042822W 0.3860 1.7/8 3.1/4 042823X 0.3970 1.15/16 3.5/16 042824Y 0.4040 1.15/16 3.5/16 042825Z 0.4130 2“ 3.3/8 042826

● Type C


● Foret extra-court● Stub drill ● Broca extra corta

4ASM

4ASM

■●

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

1.00 0.0394 6 22 046100 1)

1.25 0.0492 8 30 046125 1)

1.30 0.0512 8 30 046130 1)

1.65 0.0650 11 34 0461652.00 0.0787 12 38 0462002.30 0.0906 13 40 0462302.40 0.0945 14 43 0462402.50 0.0984 14 43 0462503.00 0.1181 16 46 0463003.10 0.1220 18 49 0463103.20 0.1260 18 49 0463203.30 0.1299 18 49 0463303.40 0.1339 20 52 0463403.50 0.1378 20 52 0463503.70 0.1457 20 52 0463704.00 0.1575 22 55 0464004.20 0.1654 22 55 0464204.50 0.1772 24 58 0464505.00 0.1969 26 62 0465005.50 0.2165 28 66 0465505.70 0.2244 28 66 0465705.80 0.2283 28 66 0465806.00 0.2362 28 66 0466006.20 0.2441 31 70 0466206.40 0.2520 31 70 0466406.50 0.2559 31 70 0466506.60 0.2598 31 70 0466606.80 0.2677 34 74 046680

1) Not Split Point

6.90 0.2717 34 74 0466907.00 0.2756 34 74 0467007.20 0.2835 34 74 0467207.50 0.2953 37 79 0467508.00 0.3150 37 79 0468008.10 0.3189 37 79 0468108.40 0.3307 37 79 0468408.50 0.3346 37 79 0468508.70 0.3425 40 84 0468709.00 0.3543 40 84 0469009.10 0.3583 40 84 0469109.20 0.3622 40 84 0469209.30 0.3661 40 84 046930

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

9.50 0.3740 40 84 0469509.70 0.3819 43 89 04697010.00 0.3937 43 89 04700010.20 0.4016 43 89 04700210.50 0.4134 43 89 04700510.80 0.4252 47 95 04700811.00 0.4331 47 95 04711011.20 0.4409 47 95 04711211.50 0.4528 47 95 04711511.80 0.4646 47 95 04711812.00 0.4724 51 102 04720012.20 0.4803 51 102 04722012.50 0.4921 51 102 047250

● Type C



R40

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

3/64 0.0469 1/2 1.3/8 0400031/16 0.0625 5/8 1.5/8 0400045/64 0.0781 11/16 1.11/16 0400053/32 0.0938 3/4 1.3/4 0400067/64 0.1094 13/16 1.13/16 0400071/8 0.1250 7/8 1.7/8 0400089/64 0.1406 15/16 1.15/16 0400095/32 0.1562 1“ 2.1/16 04001011/64 0.1719 1.1/16 2.1/8 0400113/16 0.1875 1.1/8 2.3/16 04001213/64 0.2031 1.3/16 2.1/4 0400137/32 0.2188 1.1/4 2.3/8 04001415/64 0.2344 1.5/16 2.7/16 0400151/4 0.2500 1.3/8 2.1/2 04001617/64 0.2656 1.7/16 2.5/8 0400179/32 0.2812 1.1/2 2.11/16 04001819/64 0.2969 1.9/16 2.3/4 0400195/16 0.3125 1.5/8 2.13/16 04002021/64 0.3281 1.11/16 2.15/16 04002111/32 0.3438 1.11/16 3“ 04002223/64 0.3594 1.3/4 3.1/16 0400233/8 0.3750 1.13/16 3.1/8 04002425/64 0.3906 1.7/8 3.1/4 04002513/32 0.4062 1.15/16 3.5/16 04002627/64 0.4219 2“ 3.3/8 0400277/16 0.4375 2.1/16 3.7/16 04002829/64 0.4531 2.1/8 3.9/16 04002915/32 0.4688 2.1/8 3.5/8 04003031/64 0.4844 2.3/16 3.11/16 0400311/2 0.5000 2.1/4 3.3/4 04003233/64 0.5156 2.3/8 3.7/8 04003317/32 0.5312 2.3/8 3.7/8 04003435/64 0.5469 2.1/2 4“ 0400359/16 0.5625 2.1/2 4“ 04003637/64 0.5781 2.5/8 4.1/8 04003719/32 0.5938 2.5/8 4.1/8 040038

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

39/64 0.6094 2.3/4 4.1/4 0400395/8 0.6250 2.3/4 4.1/4 04004041/64 0.6406 2.7/8 4.1/2 04004121/32 0.6562 2.7/8 4.1/2 04004243/64 0.6719 2.7/8 4.5/8 04004311/16 0.6875 2.7/8 4.5/8 04004445/64 0.7031 3“ 4.3/4 04054523/32 0.7188 3“ 4.3/4 04054647/64 0.7344 3.1/8 5“ 0405473/4 0.7500 3.1/8 5“ 04054849/64 0.7656 3.1/4 5.1/8 04054925/32 0.7812 3.1/4 5.1/8 04055051/64 0.7969 3.3/8 5.1/4 04055113/16 0.8125 3.3/8 5.1/4 04055253/64 0.8281 3.1/2 5.3/8 04055327/32 0.8438 3.1/2 5.3/8 04055455/64 0.8594 3.1/2 5.1/2 0405557/8 0.8750 3.1/2 5.1/2 04055657/64 0.8906 3.5/8 5.5/8 04055729/32 0.9062 3.5/8 5.5/8 04055859/64 0.9219 3.3/4 5.3/4 04055915/16 0.9375 3.3/4 5.3/4 04056061/64 0.9531 3.7/8 5.7/8 04056131/32 0.9688 3.7/8 5.7/8 04056263/64 0.9844 4“ 6“ 0405631“ 1.0000 4“ 6“ 0406001.1/16 1.0625 4“ 6.1/4 0406041.1/8 1.1250 4“ 6.3/8 0406081.3/16 1.1875 4.1/4 6.5/8 0406121.1/4 1.2500 4.3/8 6.3/4 0406161.5/16 1.3125 4.3/8 7“ 0406201.3/8 1.3750 4.1/2 7.1/8 0406241.7/16 1.4375 4.3/4 7.3/8 0406281.1/2 1.5000 4.7/8 7.1/2 0406321.9/16 1.5625 4.7/8 7.3/4 0406361.5/8 1.6250 4.7/8 7.3/4 0406401.11/16 1.6875 5.1/8 8“ 0406441.3/4 1.7500 5.1/8 8“ 0406481.13/16 1.8125 5.3/8 8.1/4 0406521.7/8 1.8750 5.3/8 8.1/4 0406562“ 2.0000 5.5/8 8.1/2 040700

R40

1) 1” Reduced Shank for dia 1.1/16” - 1.1/4” 1.1/4” Reduced Shank for dia 1.5/16” - 1.1/2” 1.1/2” Reduced Shank for dia 1.9/16” - 2”

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)


Note: Sizes 45/64” through 2” are black oxide

■

●



R41

R41

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 1/2 1.3/8 04106059 0.0410 1/2 1.3/8 04105958 0.0420 1/2 1.3/8 04105857 0.0430 1/2 1.3/8 04105756 0.0465 1/2 1.3/8 04105655 0.0520 5/8 1.5/8 04105554 0.0550 5/8 1.5/8 04105453 0.0595 5/8 1.5/8 04105352 0.0635 11/16 1.11/16 04105251 0.0670 11/16 1.11/16 04105150 0.0700 11/16 1.11/16 04105049 0.0730 11/16 1.11/16 04104948 0.0760 11/16 1.11/16 04104847 0.0785 11/16 1.11/16 04104746 0.0810 3/4 1.3/4 04104645 0.0820 3/4 1.3/4 04104544 0.0860 3/4 1.3/4 04104443 0.0890 3/4 1.3/4 04104342 0.0935 3/4 1.3/4 04104241 0.0960 13/16 1.13/16 04104140 0.0980 13/16 1.13/16 04104039 0.0995 13/16 1.13/16 04103938 0.1015 13/16 1.13/16 04103837 0.1040 13/16 1.13/16 04103736 0.1065 13/16 1.13/16 04103635 0.1100 7/8 1.7/8 04103534 0.1110 7/8 1.7/8 04103433 0.1130 7/8 1.7/8 04103332 0.1160 7/8 1.7/8 04103231 0.1200 7/8 1.7/8 041031

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

30 0.1285 15/16 1.15/16 04103029 0.1360 15/16 1.15/16 04102928 0.1405 15/16 1.15/16 04102827 0.1440 1“ 2.1/16 04102726 0.1470 1“ 2.1/16 04102625 0.1495 1“ 2.1/16 04102524 0.1520 1“ 2.1/16 04102423 0.1540 1“ 2.1/16 04102322 0.1570 1.1/16 2.1/8 04102221 0.1590 1.1/16 2.1/8 04102120 0.1610 1.1/16 2.1/8 04102019 0.1660 1.1/16 2.1/8 04101918 0.1695 1.1/16 2.1/8 04101817 0.1730 1.1/8 2.3/16 04101716 0.1770 1.1/8 2.3/16 04101615 0.1800 1.1/8 2.3/16 04101514 0.1820 1.1/8 2.3/16 04101413 0.1850 1.1/8 2.3/16 04101312 0.1890 1.3/16 2.1/4 04101211 0.1910 1.3/16 2.1/4 04101110 0.1935 1.3/16 2.1/4 0410109 0.1960 1.3/16 2.1/4 0410098 0.1990 1.3/16 2.1/4 0410087 0.2010 1.3/16 2.1/4 0410076 0.2040 1.1/4 2.3/8 0410065 0.2055 1.1/4 2.3/8 0410054 0.2090 1.1/4 2.3/8 0410043 0.2130 1.1/4 2.3/8 0410032 0.2210 1.5/16 2.7/16 0410021 0.2280 1.5/16 2.7/16 041001




R42

R42

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 1.5/16 2.7/16 042001B 0.2380 1.3/8 2.1/2 042002C 0.2420 1.3/8 2.1/2 042003D 0.2460 1.3/8 2.1/2 042004E 0.2500 1.3/8 2.1/2 042005F 0.2570 1.7/16 2.5/8 042006G 0.2610 1.7/16 2.5/8 042007H 0.2660 1.1/2 2.11/16 042008I 0.2720 1.1/2 2.11/16 042009J 0.2770 1.1/2 2.11/16 042010K 0.2810 1.1/2 2.11/16 042011L 0.2900 1.9/16 2.3/4 042012M 0.2950 1.9/16 2.3/4 042013N 0.3020 1.5/8 2.13/16 042014

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 1.11/16 2.15/16 042015P 0.3230 1.11/16 2.15/16 042016Q 0.3320 1.11/16 3“ 042017R 0.3390 1.11/16 3“ 042018S 0.3480 1.3/4 3.1/16 042019T 0.3580 1.3/4 3.1/16 042020U 0.3680 1.13/16 3.1/8 042021V 0.3770 1.7/8 3.1/4 042022W 0.3860 1.7/8 3.1/4 042023X 0.3970 1.15/16 3.5/16 042024Y 0.4040 1.15/16 3.5/16 042025Z 0.4130 2“ 3.3/8 042026


■ ●


L40

■●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 5/8 1.5/8 0409045/64 0.0781 11/16 1.11/16 0409053/32 0.0938 3/4 1.3/4 0409067/64 0.1094 13/16 1.13/16 0409071/8 0.1250 7/8 1.7/8 0409089/64 0.1406 15/16 1.15/16 0409095/32 0.1562 1“ 2.1/16 04091011/64 0.1719 1.1/16 2.1/8 0409113/16 0.1875 1.1/8 2.3/16 04091213/64 0.2031 1.3/16 2.1/4 0409137/32 0.2188 1.1/4 2.3/8 04091415/64 0.2344 1.5/16 2.7/16 0409151/4 0.2500 1.3/8 2.1/2 04091617/64 0.2656 1.7/16 2.5/8 0409179/32 0.2812 1.1/2 2.11/16 04091819/64 0.2969 1.9/16 2.3/4 040919

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 1.5/8 2.13/16 04092021/64 0.3281 1.11/16 2.15/16 04092111/32 0.3438 1.11/16 3“ 04092223/64 0.3594 1.3/4 3.1/16 0409233/8 0.3750 1.13/16 3.1/8 04092425/64 0.3906 1.7/8 3.1/4 04092513/32 0.4062 1.15/16 3.5/16 04092627/64 0.4219 2“ 3.3/8 0409277/16 0.4375 2.1/16 3.7/16 04092829/64 0.4531 2.1/8 3.9/16 04092915/32 0.4688 2.1/8 3.5/8 04093031/64 0.4844 2.3/16 3.11/16 0409311/2 0.5000 2.1/4 3.3/4 040932

● Foret extra-court● Stub drill ● Broca extra corta● Left hand

L40


ProdType

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

RangeDim

LaunchLo-goDate



1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







HS

S J

obbe

r Dril

ls

HSS Jobber Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper













7


Finish/Coating:

Standard:Direction of Cut:

Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:


54

1

23

4

3

2

1

A553 A554 A510 A577

58 59 60-61 62-63■279L ■279L ■187M ●184J■230L ■230L ■154M ●157J■197L ■197L ■131K ■131I■148H ■148H ■98H ■131I■92F ■92F ■69F ■98G■49D ■49D ●36D ■85G

■131G ■131G ■92G ●56E■62I ■62I ■46I ■30E●89G ●89G ●62G ●36C

■230K ■230K ■138K ■174I■164J ■164J ■105J ■141I■148J ■148J ■92J ■105G■138F ■138F ■82F ■79G■148G ■148G ●105G ●115G●98E ●98E ●66H ●79G●26C ●26C ●13B ●33E●82I ●82I ●56I ●72I●49E ●49E ●30E ●36I●33G ●33G ●20E ●33E●230G ●230G ●131D■279I ■279I ■164I■262I ■262I ■148I ●177I●115G ●115G ●66F ●157I●230H ●230H ●164G■328M ■328M ■164M■180I ■180I ■102I■180J ■180J ■108I ■157I■295G ■295G ■213G

■164G■115F

ADX PFXADX ADX



1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

HS

S J

obbe

r D

rills

HSS Jobber Drills (con‘t)

55

A141 A012 A002 QC21COQC21COM QC21V QC21G QC21 QC21P QC21GM QC21M QC21PM

R10CO R18CO R15CO

65 66-67 68-69 70-71 72 73 74 75 76 77 77 78-80●115I ■154J ■154J ●115J ■125F ■115F ■98F ■98F ■115F ■98F ■98F ●115J●98I ■131J ■131J ●98H ■75F ■69F ■59F ■59F ■69F ■59F ■59F ●98H●82G ■115F ■115F ●89G ■79H ■75H ■69H ■66H ■75H ■69H ■66H ●89G●66F ■98F ■98F ●79F ■75F ■69F ■59F ■59F ■69F ■59F ■59F ●79F●43E ●59F ●59F ■56E ●59D ●56D ●46D ●46D ●56D ●46D ●46D ■56E●30D ●33E ●33E ■33D ■33D

●49E ●66F ●66F ●72E ●115H ●105H ●89H ●89H ●105H ●89H ●89H ●72E■30G ●39G ●39G ●36G ●66F ●59F ●49F ●49F ●59F ●49F ●49F ●36G■33D ●52C ●52C ●49C ●66D ●59D ●49D ●49D ●59D ●49D ●49D ●49C

●98H ■131J ■131J ●115H ■184H ■171H ■151H ■151H ■171H ■151H ■151H ●115H●79F ■98E ■98E ●92D ■98H ■89H ■79H ■79H ■89H ■79H ■79H ●92D●66E ●92E ●92E ●72E ●105F ●95F ●85F ●79F ●95F ●85F ●79F ●72E●46E ●85E ●85E ■56E ●66D ●59D ●59D ■56E■82G ●75F ●75F ■92F ●95H ●89H ●95H ●89H ■92F■52E ●43D ●43D ■66D ●49F ●49F ●49F ●49F ■66D●23B ●23B ●23B ■36C ■36C●39G ●43G ●43G ●49G ●66H ●59H ●49F ●49F ●59H ●49F ●49F ●49G●23G ●23E ●23E ■23E ■23E●20E ●10A ●10A ●20B ●20B●108G ●164G ●164G ●125H ■112I ■98I ●89I ■98I ●89I ●125H●115I ●108I ●108I ●131F ■98H ■89H ●79H ■89H ●79H ●131F●102H ●128H ●128H ●89H ■98H ■89H ●79H ■89H ●79H ●89H●52G ●98G ●98G ●69F ●69F●108J ■134K ■134K ●108J ■440H ■400H ●351H ■400H ●351H ●108J●98I ■125J ■125J ●98I ■384H ■351H ●325H ■351H ●325H ●98I●89H ●108I ●108I ●98H ●98H●79F ●108I ●108I ●89F ■344H ■315H ●276H ■315H ●276H ●89F●98J ■98I ■98I●92H ■164H ■164H●46F ●115F ●115F●10B ●10B ●10B ●20C ●20C

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

A907

64●115H●98H■82G■82G■62E■52E

●49E■23E●30C

●108G●89G●66E●49E■72E■49E■20C■46G■23G■20C●213G●230G●112G●98G●230E■148N●131N●95G●180I●131G

PFX



ProdType

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

RangeDim

LaunchLo-goDate



1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







HS

S J

obbe

r Dril

ls

HSS Jobber Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper













7


Finish/Coating:


Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:


56

1

23

4

3

2

1

2ACO R88CO R89CO

EZ10P EZ18P

HX10 HX18 HX15

81 83 84 85-86●115J ●115J ■115H ■115H●98H ●98H ■98H ■69H●89G ●89G ■82F ■75I●79F ●79F ■66F ■69H■56E ■56E ●43E ●56F■33D ■33D ●30D

●72E ●72E ●49E ●105I●36G ●36G ●26G ●59H●49C ●49C ●30C ●56F

●115H ●115H ■98H ■171L●92D ●92D ■79F ■89I●72E ●72E ●66E ●95H■56E ■56E ●46E ●59F■92F ■92F ●75E ●95H■66D ■66D ●39D ●75H■36C ■36C ●20B●49G ●49G ●33G ●59H■23E ■23E ●20E●20B ●20B ●10A●125H ●125H ●108G●131F ●131F ●115I●89H ●89H ●89H●69F ●69F ●52G●108J ●108J ●108J●98I ●98I ●98I●98H ●98H ●89H●89F ●89F ●79F

●98J●92H●46F

●20C ●20C ●10B



1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

HS

S J

obbe

r D

rills

HSS Jobber Drills (con‘t)

57

R10B R18B R15B

R10A R18A R15A

R10 R18 R15

2AB

87-88 89-90 91-93 94●115J ●115J ■115H ■115H●98H ●98H ■98H ■98H●89G ●89G ■82F ■82F●79F ●79F ■66F ■66F■56E ■56E ●43E ●43E■33D ■33D ●30D ●30D

●72E ●72E ●49E ●49E●36G ●36G ●26G ●26G●49C ●49C ●30C ●30C

●115H ●115H ■98H ■98H●92D ●92D ■79F ■79F●72E ●72E ●66E ●66E■56E ■56E ●46E ●46E■92F ■92F ●75E ●75E■66D ■66D ●39D ●39D■36C ■36C ●20B ●20B●49G ●49G ●33G ●33G■23E ■23E ●20E ●20E●20B ●20B ●10A ●10A●125H ●125H ●108G ●108G●131F ●131F ●115I ●115I●89H ●89H ●89H ●89H●69F ●69F ●52G ●52G●108J ●108J ●108J ●108J●98I ●98I ●98I ●98I●98H ●98H ●89H ●89H●89F ●89F ●79F ●79F

●98J ●98J●92H ●92H●46F ●46F

●20C ●20C ●10B ●10B

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

2AR10P R18P R15P

R10PM R08 R10H R18H

R18S R10S

L10 L18

95 97-99 100 102 103-104 105-106 106-107■115H ■115H ■115H ■115H ●108I ●82F ■115H■98H ■98H ■98H ■98H ●92I ●66F ■98H■82F ■82F ■82F ■82F ■82F■66F ■66F ■66F ■66F ■66F●43E ●43E ●43E ●43E ●43E●30D ●30D ●30D ●30D ●30D

●49E ●49E ●49E ●49E ●49E●26G ●26G ●26G ●26G ●26G●30C ●30C ●30C ●30C ●30C

■98H ■98H ■98H ■98H ●82F ●66E ■98H■79F ■79F ■79F ■79F ●66D ●49C ■79F●66E ●66E ●66E ●66E ●52C ●33B ●66E●46E ●46E ●46E ●46E ●33C ●20B ●46E●75E ●75E ●75E ●75E ●49C ●75E●39D ●39D ●39D ●39D ●39D●20B ●20B ●20B ●20B ●20B●33G ●33G ●33G ●33G ●23E ●33G●20E ●20E ●20E ●20E ●20E●10A ●10A ●10A ●10A ●10A●108G ●108G ●108G ●108G ■115H ●108G●115I ●115I ●115I ●115I ●118G ■131I ●115I●89H ●89H ●89H ●89H ■115G ●89H●52G ●52G ●52G ●52G ●49E ●52G●108J ●108J ●108J ●108J ■148J ●98I ●108J●98I ●98I ●98I ●98I ■115J ●89H ●98I●89H ●89H ●89H ●89H ■98G ●79G ●89H●79F ●79F ●79F ●79F ■95G ●66E ●79F●98J ●98J ●98J ●98J ■138J ●98J●92H ●92H ●92H ●92H ●131I ●115F ●92H●46F ●46F ●46F ●46F ●66G ●66D ●46F●10B ●10B ●10B ●10B ●10B



A553

A553

■

●

d1Øh8mm

d1dec.Inch

l2mm

l1mm

l3mm

d2Øh6mm Stock #

EDP #ore-Code

5.00 0.1968 36 79 36 6 0391204 A5535.05.10 0.2007 37 79 36 6 0391211 A5535.15.20 0.2047 38 79 36 6 0391228 A5535.25.30 0.2086 38 79 36 6 0391235 A5535.35.50 0.2165 40 79 36 6 0391242 A5535.55.60 0.2204 41 79 36 6 0391259 A5535.65.80 0.2283 42 79 36 6 0391266 A5535.85.90 0.2322 43 79 36 6 0391273 A5535.96.00 0.2362 43 79 36 6 0391280 A5536.06.30 0.2480 46 87 36 8 0391297 A5536.36.50 0.2559 47 87 36 8 0391303 A5536.56.60 0.2598 48 87 36 8 0391310 A5536.66.80 0.2677 48 87 36 8 0391327 A5536.86.90 0.2716 48 87 36 8 0391334 A5536.97.00 0.2755 48 87 36 8 0391341 A5537.07.30 0.2874 53 94 36 8 0391358 A5537.37.40 0.2913 54 94 36 8 0391365 A5537.47.50 0.2952 54 94 36 8 0391372 A5537.57.80 0.3070 56 94 36 8 0391389 A5537.87.90 0.3110 57 94 36 8 0391396 A5537.98.00 0.3149 58 94 36 8 0391402 A5538.08.50 0.3346 75 130 40 10 0391419 A5538.58.70 0.3425 75 130 40 10 0391426 A5538.79.00 0.3543 75 130 40 10 0391433 A5539.09.40 0.3700 75 130 40 10 0391440 A5539.49.50 0.3740 75 130 40 10 0391457 A5539.510.00 0.3937 75 130 40 10 0390795 A55310.010.20 0.4015 87 150 45 12 0390801 A55310.210.30 0.4055 87 150 45 12 0390818 A55310.310.50 0.4133 87 150 45 12 0390825 A55310.510.80 0.4251 94 150 45 12 0390832 A55310.811.00 0.4330 94 150 45 12 0390849 A55311.011.30 0.4448 94 150 45 12 0390856 A55311.311.50 0.4527 94 150 45 12 0390863 A55311.5

d1Øh8mm

d1dec.Inch

l2mm

l1mm

l3mm

d2Øh6mm Stock #

EDP #ore-Code

12.00 0.4724 94 150 45 12 0390870 A55312.012.50 0.4921 101 160 45 14 0390887 A55312.513.00 0.5118 101 160 45 14 0390894 A55313.013.10 0.5157 101 160 45 14 0390900 A55313.113.25 0.5216 101 160 45 14 0390917 A55313.2513.50 0.5314 101 160 45 14 0390924 A55313.513.75 0.5413 101 160 45 14 0390931 A55313.7514.00 0.5511 101 160 45 14 0390948 A55314.014.25 0.5610 108 170 48 16 0390955 A55314.2514.50 0.5708 108 170 48 16 0390962 A55314.514.75 0.5807 108 170 48 16 0390979 A55314.7515.00 0.5905 108 170 48 16 0390986 A55315.015.10 0.5944 108 170 48 16 0390993 A55315.115.25 0.6003 108 170 48 16 0391006 A55315.2515.50 0.6102 108 170 48 16 0391013 A55315.515.75 0.6200 108 170 48 16 0391020 A55315.7516.00 0.6299 108 170 48 16 0391037 A55316.016.25 0.6397 125 190 48 18 0391044 A55316.2516.50 0.6496 125 190 48 18 0391051 A55316.516.75 0.6594 125 190 48 18 0391068 A55316.7517.00 0.6692 125 190 48 18 0391075 A55317.017.25 0.6791 130 190 48 18 0391082 A55317.2517.50 0.6889 130 190 48 18 0391099 A55317.517.75 0.6988 130 190 48 18 0391105 A55317.7518.00 0.7086 130 190 48 18 0391112 A55318.018.25 0.7185 135 200 50 20 0391129 A55318.2518.50 0.7283 135 200 50 20 0391136 A55318.518.75 0.7381 135 200 50 20 0391143 A55318.7519.00 0.7480 135 200 50 20 0391150 A55319.019.25 0.7578 140 200 50 20 0391167 A55319.2519.50 0.7677 140 200 50 20 0391174 A55319.519.75 0.7775 140 200 50 20 0391181 A55319.7520.00 0.7874 140 200 50 20 0391198 A55320.0

● ADX Drill ● Foret ADX ● Broca ADX


A554

A554

■

●

d1Øh8mm

d1dec.Inch

l2mm

l1mm

l3mm

d2Øh6mm Stock #

EDP #ore-Code

5.00 0.1968 36 79 36 6 0392072 A5545.05.10 0.2007 37 79 36 6 0392089 A5545.15.20 0.2047 38 79 36 6 0392096 A5545.25.30 0.2086 38 79 36 6 0392102 A5545.35.50 0.2165 40 79 36 6 0392119 A5545.55.60 0.2204 41 79 36 6 0392126 A5545.65.80 0.2283 42 79 36 6 0392133 A5545.85.90 0.2322 43 79 36 6 0392140 A5545.96.00 0.2362 43 79 36 6 0392157 A5546.06.30 0.2480 46 87 36 8 0392164 A5546.36.50 0.2559 47 87 36 8 0392171 A5546.56.60 0.2598 48 87 36 8 0392188 A5546.66.80 0.2677 48 87 36 8 0392195 A5546.86.90 0.2716 48 87 36 8 0392201 A5546.97.00 0.2755 48 87 36 8 0392218 A5547.07.30 0.2874 53 94 36 8 0392225 A5547.37.40 0.2913 54 94 36 8 0392232 A5547.47.50 0.2952 54 94 36 8 0392249 A5547.57.80 0.3070 56 94 36 8 0392256 A5547.87.90 0.3110 57 94 36 8 0392263 A5547.98.00 0.3149 58 94 36 8 0392270 A5548.08.50 0.3346 75 130 40 10 0392287 A5548.58.70 0.3425 75 130 40 10 0392294 A5548.79.00 0.3543 75 130 40 10 0392300 A5549.09.40 0.3700 75 130 40 10 0392317 A5549.49.50 0.3740 75 130 40 10 0392324 A5549.510.00 0.3937 75 130 40 10 0391464 A55410.010.20 0.4015 87 150 45 12 0391471 A55410.210.30 0.4055 87 150 45 12 0391488 A55410.310.50 0.4133 87 150 45 12 0391495 A55410.510.80 0.4251 94 150 45 12 0391501 A55410.811.00 0.4330 94 150 45 12 0391518 A55411.011.30 0.4448 94 150 45 12 0391525 A55411.311.50 0.4527 94 150 45 12 0391532 A55411.511.80 0.4646 94 150 45 12 0400234 A55411.812.00 0.4724 94 150 45 12 0391549 A55412.012.50 0.4921 101 160 45 14 0391556 A55412.513.00 0.5118 101 160 45 14 0391563 A55413.013.10 0.5157 101 160 45 14 0391570 A55413.113.25 0.5216 101 160 45 14 0391587 A55413.2513.50 0.5314 101 160 45 14 0391594 A55413.513.75 0.5413 101 160 45 14 0391600 A55413.7514.00 0.5511 101 160 45 14 0391617 A55414.014.25 0.5610 108 170 48 16 0391624 A55414.25

d1Øh8mm

d1dec.Inch

l2mm

l1mm

l3mm

d2Øh6mm Stock #

EDP #ore-Code

14.50 0.5708 108 170 48 16 0391631 A55414.514.75 0.5807 108 170 48 16 0391648 A55414.7515.00 0.5905 108 170 48 16 0391655 A55415.015.10 0.5944 108 170 48 16 0391662 A55415.115.25 0.6003 108 170 48 16 0391679 A55415.2515.50 0.6102 108 170 48 16 0391686 A55415.515.75 0.6200 108 170 48 16 0391693 A55415.7516.00 0.6299 108 170 48 16 0391709 A55416.016.25 0.6397 125 190 48 18 0391716 A55416.2516.50 0.6496 125 190 48 18 0391723 A55416.516.75 0.6594 125 190 48 18 0391730 A55416.7517.00 0.6692 125 190 48 18 0391747 A55417.017.25 0.6791 130 190 48 18 0391754 A55417.2517.50 0.6889 130 190 48 18 0391761 A55417.517.75 0.6988 130 190 48 18 0391778 A55417.7518.00 0.7086 130 190 48 18 0391785 A55418.018.25 0.7185 135 200 50 20 0391792 A55418.2518.50 0.7283 135 200 50 20 0391808 A55418.518.75 0.7381 135 200 50 20 0391815 A55418.7519.00 0.7480 135 200 50 20 0391822 A55419.019.25 0.7578 140 200 50 20 0391839 A55419.2519.50 0.7677 140 200 50 20 0391846 A55419.519.75 0.7775 140 200 50 20 0391853 A55419.7520.00 0.7874 140 200 50 20 0391860 A55420.020.50 0.8070 141 219 56 25 0391877 A55420.520.75 0.8169 141 219 56 25 0391884 A55420.7521.00 0.8267 141 219 56 25 0391891 A55421.021.50 0.8464 148 226 56 25 0391907 A55421.522.00 0.8661 148 226 56 25 0391914 A55422.022.25 0.8759 155 233 56 25 0391921 A55422.2522.50 0.8858 155 233 56 25 0391938 A55422.523.00 0.9055 155 233 56 25 0391945 A55423.023.25 0.9153 162 240 56 25 0391952 A55423.2523.50 0.9251 162 240 56 25 0391969 A55423.524.00 0.9448 162 240 56 25 0391976 A55424.024.50 0.9645 168 240 56 25 0391983 A55424.525.00 0.9842 168 246 56 25 0391990 A55425.026.00 1.0236 175 257 60 32 0392003 A55426.026.50 1.0433 182 264 60 32 0392010 A55426.527.00 1.0629 182 264 60 32 0392027 A55427.028.00 1.1023 189 271 60 32 0392034 A55428.029.00 1.1417 195 277 60 32 0392041 A55429.029.50 1.1614 202 284 60 32 0392058 A55429.530.00 1.1811 202 284 60 32 0392065 A55430.0

● ADX Drill ● Foret ADX ● Broca ADX


● Foret court ADX

A510

A510

■

●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

3.00 0.1181 33 61 0036495 A5103.03.10 0.1220 36 65 0036501 A5103.1

1/8 3.18 0.1250 36 65 0168974 A5101/83.20 0.1259 36 65 0036518 A5103.23.30 0.1299 36 65 0036525 A5103.33.40 0.1338 39 70 0036532 A5103.43.50 0.1377 39 70 0036549 A5103.5

9/64 3.57 0.1405 39 70 0168981 A5109/643.60 0.1417 39 70 0036556 A5103.63.70 0.1456 39 70 0036563 A5103.73.80 0.1496 43 75 0036570 A5103.83.90 0.1535 43 75 0036587 A5103.9

5/32 3.97 0.1562 43 75 0168998 A5105/324.00 0.1574 43 75 0036594 A5104.04.10 0.1614 43 75 0036600 A5104.14.20 0.1653 43 75 0036617 A5104.24.30 0.1692 47 80 0036624 A5104.3

11/64 4.37 0.1720 47 80 0169001 A51011/644.40 0.1732 47 80 0036631 A5104.44.50 0.1771 47 80 0036648 A5104.54.60 0.1811 47 80 0036655 A5104.64.70 0.1850 47 80 0036662 A5104.7

3/16 4.76 0.1874 52 86 0169018 A5103/164.80 0.1889 52 86 0036679 A5104.84.90 0.1929 52 86 0036686 A5104.95.00 0.1968 52 86 0036693 A5105.05.10 0.2007 52 86 0036709 A5105.1

13/64 5.16 0.2031 52 86 0169025 A51013/645.20 0.2047 52 86 0036716 A5105.25.30 0.2086 52 86 0036723 A5105.35.40 0.2125 57 93 0036730 A5105.45.50 0.2165 57 93 0036747 A5105.5

7/32 5.56 0.2188 57 93 0169032 A5107/325.60 0.2204 57 93 0036754 A5105.6

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

5.70 0.2244 57 93 0036761 A5105.75.80 0.2283 57 93 0036778 A5105.85.90 0.2322 57 93 0036785 A5105.9

15/64 5.95 0.2342 57 93 0169049 A51015/646.00 0.2362 57 93 0036792 A5106.06.10 0.2401 63 101 0036808 A5106.16.20 0.2440 63 101 0036815 A5106.26.30 0.2480 63 101 0036822 A5106.3

1/4 6.35 0.2500 63 101 0169056 A5101/46.40 0.2519 63 101 0036839 A5106.46.50 0.2559 63 101 0036846 A5106.56.60 0.2598 63 101 0036853 A5106.66.70 0.2637 63 101 0036860 A5106.7

17/64 6.75 0.2657 69 109 0169063 A51017/646.80 0.2677 69 109 0036877 A5106.86.90 0.2716 69 109 0036884 A5106.97.00 0.2755 69 109 0036891 A5107.07.10 0.2795 69 109 0036907 A5107.1

9/32 7.14 0.2811 69 109 0169070 A5109/327.20 0.2834 69 109 0036914 A5107.27.30 0.2874 69 109 0036921 A5107.37.40 0.2913 69 109 0036938 A5107.47.50 0.2952 69 109 0036945 A5107.5

19/64 7.54 0.2968 75 117 0169087 A51019/647.60 0.2992 75 117 0036952 A5107.67.70 0.3031 75 117 0036969 A5107.77.80 0.3070 75 117 0036976 A5107.87.90 0.3110 75 117 0036983 A5107.9

5/16 7.94 0.3125 75 117 0169094 A5105/168.00 0.3149 75 117 0036990 A5108.08.10 0.3188 75 117 0037003 A5108.18.20 0.3228 75 117 0037010 A5108.28.30 0.3267 75 117 0037027 A5108.3

21/64 8.33 0.3279 75 117 0169100 A51021/648.40 0.3307 75 117 0037034 A5108.48.50 0.3346 75 117 0037041 A5108.58.60 0.3385 81 125 0037058 A5108.68.70 0.3425 81 125 0037065 A5108.7

● ADX Jobber Drill ● Broca ADX , serie corta


A510

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

1lmm Stock #

EDP #ore-Code

11/32 8.73 0.3437 81 125 0169117 A51011/328.80 0.3464 81 125 0037072 A5108.88.90 0.3503 81 125 0037089 A5108.99.00 0.3543 81 125 0037096 A5109.09.10 0.3582 81 125 0037102 A5109.1

23/64 9.13 0.3594 81 125 0169124 A51023/649.20 0.3622 81 125 0037119 A5109.29.30 0.3661 81 125 0037126 A5109.39.40 0.3700 81 125 0037133 A5109.49.50 0.3740 81 125 0037140 A5109.5

3/8 9.53 0.3750 87 133 0169131 A5103/89.60 0.3779 87 133 0037157 A5109.69.70 0.3818 87 133 0037164 A5109.79.80 0.3858 87 133 0037171 A5109.89.90 0.3897 87 133 0037188 A5109.9

25/64 9.92 0.3905 87 133 0169148 A51025/6410.00 0.3937 87 133 0036174 A51010.010.10 0.3976 87 133 0036181 A51010.110.20 0.4015 87 133 0036198 A51010.210.30 0.4055 87 133 0036204 A51010.3

13/32 10.32 0.4062 87 133 0169155 A51013/3210.40 0.4094 87 133 0036211 A51010.410.50 0.4133 87 133 0036228 A51010.510.60 0.4173 87 133 0036235 A51010.610.70 0.4212 94 142 0036242 A51010.7

27/64 10.72 0.4220 94 142 0169162 A51027/6410.80 0.4251 94 142 0036259 A51010.810.90 0.4291 94 142 0036266 A51010.9

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

1lmm Stock #

EDP #ore-Code

11.00 0.4330 94 142 0036273 A51011.011.10 0.4370 94 142 0036280 A51011.1

7/16 11.11 0.4374 94 142 0169179 A5107/1611.20 0.4409 94 142 0036297 A51011.211.30 0.4448 94 142 0036303 A51011.311.40 0.4488 94 142 0036310 A51011.411.50 0.4527 94 142 0036327 A51011.5

29/64 11.51 0.4531 94 142 0169186 A51029/6411.60 0.4566 94 142 0036334 A51011.611.70 0.4606 94 142 0036341 A51011.711.80 0.4645 94 142 0036358 A51011.811.90 0.4685 101 151 0036365 A51011.9

15/32 11.91 0.4688 101 151 0169193 A51015/3212.00 0.4724 101 151 0036372 A51012.012.10 0.4763 101 151 0036389 A51012.112.20 0.4803 101 151 0036396 A51012.212.30 0.4842 101 151 0036402 A51012.3

31/64 12.30 0.4842 101 151 0169209 A51031/6412.40 0.4881 101 151 0036419 A51012.412.50 0.4921 101 151 0036426 A51012.512.60 0.4960 101 151 0036433 A51012.612.70 0.5000 101 151 0036440 A51012.7

1/2 12.70 0.5000 101 151 0169216 A5101/212.80 0.5039 101 151 0036457 A51012.812.90 0.5078 101 151 0036464 A51012.913.00 0.5118 101 151 0036471 A51013.014.00 0.5511 108 160 0036488 A51014.0

● Foret court ADX● ADX Jobber Drill ● Broca ADX , serie corta


A577

A577

■

●

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

1.50 0.0590 18 40 0279502 A5771.52.00 0.0787 24 49 0279519 A5772.02.50 0.0984 30 57 0125205 A5772.52.60 0.1023 30 57 0125199 A5772.63.00 0.1181 33 61 0125212 A5773.03.10 0.1220 36 65 0586471 A5773.13.20 0.1259 36 65 0586488 A5773.23.30 0.1299 36 65 0125229 A5773.33.40 0.1338 39 70 0125236 A5773.43.50 0.1377 39 70 0125243 A5773.53.60 0.1417 39 70 0586495 A5773.63.70 0.1456 39 70 0586501 A5773.73.80 0.1496 43 75 0586518 A5773.83.90 0.1535 43 75 0586525 A5773.94.00 0.1574 43 75 0125250 A5774.04.10 0.1614 43 75 0125267 A5774.14.20 0.1653 43 75 0125274 A5774.24.30 0.1692 47 80 0125281 A5774.34.40 0.1732 47 80 0586532 A5774.44.50 0.1771 47 80 0125298 A5774.54.60 0.1811 47 80 0586549 A5774.64.70 0.1850 47 80 0586556 A5774.74.80 0.1889 52 86 0279526 A5774.84.90 0.1929 52 86 0125304 A5774.95.00 0.1968 52 86 0125311 A5775.05.10 0.2007 52 86 0125328 A5775.15.20 0.2047 52 86 0279533 A5775.25.30 0.2086 52 86 0586563 A5775.35.40 0.2125 57 93 0586570 A5775.45.50 0.2165 57 93 0125335 A5775.5

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

5.60 0.2204 57 93 0586587 A5775.65.70 0.2244 57 93 0279540 A5775.75.80 0.2283 57 93 0586594 A5775.85.90 0.2322 57 93 0586600 A5775.96.00 0.2362 57 93 0125342 A5776.06.10 0.2401 63 101 0279557 A5776.16.20 0.2440 63 101 0586617 A5776.26.30 0.2480 63 101 0586624 A5776.36.40 0.2519 63 101 0586631 A5776.46.50 0.2559 63 101 0125359 A5776.56.60 0.2598 63 101 0586648 A5776.66.70 0.2637 63 101 0586655 A5776.76.80 0.2677 69 109 0125366 A5776.86.90 0.2716 69 109 0125373 A5776.97.00 0.2755 69 109 0125380 A5777.07.10 0.2795 69 109 0586662 A5777.17.20 0.2834 69 109 0586679 A5777.27.30 0.2874 69 109 0586686 A5777.37.40 0.2913 69 109 0586693 A5777.47.50 0.2952 69 109 0125397 A5777.57.60 0.2992 75 117 0586709 A5777.67.70 0.3031 75 117 0586716 A5777.77.80 0.3070 75 117 0586723 A5777.87.90 0.3110 75 117 0586730 A5777.98.00 0.3149 75 117 0125403 A5778.08.10 0.3188 75 117 0586747 A5778.18.20 0.3228 75 117 0586754 A5778.28.30 0.3267 75 117 0279564 A5778.38.40 0.3307 75 117 0586761 A5778.48.50 0.3346 75 117 0125410 A5778.5

● Foret PFX court● PFX Jobber Drill ● Broca PFX Serie Corta


d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

8.60 0.3385 81 125 0125427 A5778.68.70 0.3425 81 125 0125434 A5778.78.80 0.3464 81 125 0586778 A5778.88.90 0.3503 81 125 0586785 A5778.99.00 0.3543 81 125 0125441 A5779.09.10 0.3582 81 125 0586792 A5779.19.20 0.3622 81 125 0586808 A5779.29.30 0.3661 81 125 0586815 A5779.39.40 0.3700 81 125 0586822 A5779.49.50 0.3740 81 125 0125458 A5779.59.60 0.3779 87 133 0586839 A5779.69.70 0.3818 87 133 0586846 A5779.79.80 0.3858 87 133 0586853 A5779.89.90 0.3897 87 133 0586860 A5779.910.00 0.3937 87 133 0125106 A57710.010.20 0.4015 87 133 0125113 A57710.210.30 0.4055 87 133 0125120 A57710.310.40 0.4094 87 133 0125137 A57710.4

A577

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

10.50 0.4133 87 133 0125144 A57710.510.80 0.4251 914 142 0586372 A57710.811.00 0.4330 97 142 0125151 A57711.0 1)

11.20 0.4409 97 142 0586389 A57711.2 1)

11.50 0.4527 97 142 0125168 A57711.5 1)

11.80 0.4645 97 142 0586396 A57711.8 1)

12.00 0.4724 106 151 0125175 A57712.0 1)

12.20 0.4803 106 151 0125182 A57712.2 1)

12.50 0.4921 106 151 0586402 A57712.5 1)

12.80 0.5039 106 151 0586419 A57712.8 1)

13.00 0.5118 106 151 0139615 A57713.0 1)

13.50 0.5314 115 160 0586426 A57713.5 1)

14.00 0.5511 115 160 0139622 A57714.0 1)

14.50 0.5708 121 169 0586433 A57714.5 1)

15.00 0.5905 121 169 0586440 A57715.0 1)

15.50 0.6102 130 178 0586457 A57715.5 1)

16.00 0.6299 130 178 0586464 A57716.0 1)

● Foret PFX court● PFX Jobber Drill ● Broca PFX Serie Corta

1) Flute lengths longer than standard


● Foret PFX court

A907

A907

■●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

1.00 0.0393 12 34 0144831 A9071.01.10 0.0433 14 36 0144848 A9071.11.20 0.0472 16 38 0144855 A9071.21.30 0.0511 16 38 0144862 A9071.31.40 0.0551 18 40 0144879 A9071.41.50 0.0590 18 40 0144886 A9071.5

1/16 1.59 0.0625 20 43 0170830 A9071/161.60 0.0629 20 43 0144893 A9071.61.70 0.0669 20 43 0144909 A9071.71.80 0.0708 22 46 0144916 A9071.81.90 0.0748 22 46 0144923 A9071.9

5/64 1.98 0.0779 24 49 0170847 A9075/642.00 0.0787 24 49 0144930 A9072.02.10 0.0826 24 49 0144947 A9072.12.20 0.0866 27 53 0144954 A9072.22.30 0.0905 27 53 0144961 A9072.3

3/32 2.38 0.0937 30 57 0170854 A9073/322.40 0.0944 30 57 0144978 A9072.42.50 0.0984 30 57 0144985 A9072.52.60 0.1023 30 57 0144992 A9072.62.70 0.1062 33 61 0145005 A9072.7

7/64 2.78 0.1094 33 61 0170861 A9077/642.80 0.1102 33 61 0145012 A9072.82.90 0.1141 33 61 0145029 A9072.93.00 0.1181 33 61 0145036 A9073.03.10 0.1220 36 65 0145043 A9073.1

1/8 3.18 0.1251 36 65 0170878 A9071/83.20 0.1259 36 65 0145050 A9073.23.30 0.1299 36 65 0145067 A9073.33.40 0.1338 39 70 0145074 A9073.43.50 0.1377 39 70 0145081 A9073.5

9/64 3.57 0.1405 39 70 0170885 A9079/643.60 0.1417 39 70 0145098 A9073.63.70 0.1456 39 70 0145104 A9073.73.80 0.1496 43 75 0145111 A9073.83.90 0.1535 43 75 0145128 A9073.9

5/32 3.97 0.1562 43 75 0170892 A9075/324.00 0.1574 43 75 0145135 A9074.04.10 0.1614 43 75 0145142 A9074.14.20 0.1653 43 75 0145159 A9074.24.30 0.1692 47 80 0145166 A9074.3

11/64 4.37 0.1720 47 80 0170908 A90711/644.40 0.1732 47 80 0145173 A9074.44.50 0.1771 47 80 0145180 A9074.54.60 0.1811 47 80 0145197 A9074.64.70 0.1850 47 80 0145203 A9074.7

3/16 4.76 0.1874 52 86 0170915 A9073/164.80 0.1889 52 86 0145210 A9074.8

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

4.90 0.1929 52 86 0145227 A9074.95.00 0.1968 52 86 0145234 A9075.05.10 0.2007 52 86 0145241 A9075.1

N7 5.11 0.2010 52 86 0588116 A907N713/64 5.16 0.2031 52 86 0170922 A90713/64

5.20 0.2047 52 86 0145258 A9075.25.30 0.2086 52 86 0145265 A9075.35.40 0.2125 57 93 0145272 A9075.45.50 0.2165 57 93 0145289 A9075.5

7/32 5.56 0.2188 57 93 0170939 A9077/325.60 0.2204 57 93 0145296 A9075.65.70 0.2244 57 93 0145302 A9075.75.80 0.2283 57 93 0145319 A9075.85.90 0.2322 57 93 0145326 A9075.9

15/64 5.95 0.2342 57 93 0170946 A90715/646.00 0.2362 57 93 0145333 A9076.06.10 0.2401 63 101 0145340 A9076.16.20 0.2440 63 101 0145357 A9076.26.30 0.2480 63 101 0145364 A9076.3

1/4 6.35 0.2500 63 101 0170953 A9071/46.40 0.2519 63 101 0145371 A9076.46.50 0.2559 63 101 0145388 A9076.5

F 6.53 0.2570 63 101 0588093 A907F6.60 0.2598 63 101 0145395 A9076.6

● PFX Jobber Drill ● Broca PFX Serie Corta

6.70 0.2637 63 101 0145401 A9076.717/64 6.75 0.2657 69 109 0170960 A90717/64

6.80 0.2677 69 109 0145418 A9076.86.90 0.2716 69 109 0145425 A9076.9

I 6.91 0.2720 69 109 0588109 A907I7.00 0.2755 69 109 0145432 A9077.07.10 0.2795 69 109 0145449 A9077.1

9/32 7.14 0.2811 69 109 0170977 A9079/327.20 0.2834 69 109 0145456 A9077.27.30 0.2874 69 109 0145463 A9077.37.40 0.2913 69 109 0145470 A9077.47.50 0.2952 69 109 0145487 A9077.5

19/64 7.54 0.2968 75 117 0170984 A90719/647.60 0.2992 75 117 0145494 A9077.67.70 0.3031 75 117 0145500 A9077.77.80 0.3070 75 117 0145517 A9077.87.90 0.3110 75 117 0145524 A9077.9

5/16 7.94 0.3125 75 117 0170991 A9075/168.00 0.3149 75 117 0145531 A9078.08.10 0.3188 75 117 0145548 A9078.18.20 0.3228 75 117 0145555 A9078.28.30 0.3267 75 117 0145562 A9078.3

21/64 8.33 0.3279 75 117 0171004 A90721/648.40 0.3307 75 117 0145579 A9078.4


d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

A907 - A141

A141

■●

d1ØInch

d1Ømm

d1dec.Inch

l2 Inch

l1 Inch

Stock #

EDP #or e-Code

1/16 1.588 0.0625 25/32 1.11/16 0423264 A1411/165/64 1.984 0.0781 15/16 1.15/16 0423486 A1415/643/32 2.381 0.0938 1.3/16 2.1/4 0423431 A1413/327/64 2.778 0.1094 1.5/16 2.13/32 0423516 A1417/641/8 3.175 0.1250 1.7/16 2.9/16 0423295 A1411/89/64 3.572 0.1406 1.17/32 2.3/4 0423530 A1419/645/32 3.969 0.1562 1.11/16 2.15/16 0423479 A1415/3211/64 4.366 0.1719 1.27/32 3.5/32 0423318 A14111/643/16 4.763 0.1875 2.1/16 3.3/8 0423424 A1413/1613/64 5.159 0.2031 2.1/16 3.3/8 0423332 A14113/647/32 5.556 0.2188 2.1/4 3.21/32 0423509 A1417/3215/64 5.953 0.2344 2.1/4 3.21/32 0423547 A14115/641/4 6.350 0.2500 2.1/2 3.31/32 0423288 A1411/417/64 6.747 0.2656 2.23/32 4.9/32 0423356 A14117/649/32 7.144 0.2812 2.23/32 4.9/32 0423523 A1419/32

d1ØInch

d1Ømm

d1dec.Inch

l2 Inch

l1 Inch

Stock #

EDP #or e-Code

19/64 7.541 0.2969 2.15/16 4.19/32 0423363 A14119/645/16 7.938 0.3125 2.15/16 4.19/32 0423462 A1415/1621/64 8.334 0.3281 2.15/16 4.19/32 0423370 A14121/6411/32 8.731 0.3438 3.3/16 4.29/32 0423301 A14111/3223/64 9.128 0.3594 3.3/16 4.29/32 0423387 A14123/643/8 9.525 0.3750 3.7/16 5.1/4 0423448 A1413/825/64 9.922 0.3906 3.7/16 5.1/4 0423394 A14125/6413/32 10.319 0.4062 3.7/16 5.1/4 0423325 A14113/3227/64 10.716 0.4219 3.11/16 5.19/32 0423400 A14127/647/16 11.113 0.4375 3.11/16 5.19/32 0423493 A1417/1629/64 11.509 0.4531 3.11/16 5.19/32 0423417 A14129/6415/32 11.906 0.4688 3.31/32 5.15/16 0423349 A14115/3231/64 12.303 0.4844 3.31/32 5.15/16 0423455 A14131/641/2 12.700 0.5000 3.31/32 5.15/16 0423271 A1411/2

● Foret court● Jobber Drill ● Broca , serie corta● Fast spiral for stainless steel

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

Q 8.43 0.3320 75 117 0588123 A907Q8.50 0.3346 75 117 0145586 A9078.58.60 0.3385 81 125 0145593 A9078.6

R 8.61 0.3390 75 117 0588130 A907R8.70 0.3425 81 125 0145609 A9078.7

11/32 8.73 0.3437 81 125 0171011 A90711/328.80 0.3464 81 125 0145616 A9078.88.90 0.3503 81 125 0145623 A9078.99.00 0.3543 81 125 0145630 A9079.09.10 0.3582 81 125 0145647 A9079.1

23/64 9.13 0.3594 81 125 0171028 A90723/649.20 0.3622 81 125 0145654 A9079.29.30 0.3661 81 125 0145661 A9079.39.40 0.3700 81 125 0145678 A9079.49.50 0.3740 81 125 0145685 A9079.5

3/8 9.53 0.3751 87 133 0171035 A9073/89.60 0.3779 87 133 0145692 A9079.69.70 0.3818 87 133 0145708 A9079.7

27/64 10.72 0.4220 97 142 0171066 A90727/64 1)

10.80 0.4251 97 142 0145784 A90710.8 1)

11.00 0.4330 97 142 0145791 A90711.0 1)

7/16 11.11 0.4374 97 142 0171073 A9077/16 1)

11.20 0.4409 97 142 0145807 A90711.2 1)

11.50 0.4527 97 142 0145814 A90711.5 1)

29/64 11.51 0.4531 97 142 0171080 A90729/64 1)

11.80 0.4645 97 142 0145821 A90711.8 1)

15/32 11.91 0.4688 106 151 0171097 A90715/32 1)

12.00 0.4724 106 151 0145838 A90712.0 1)

12.20 0.4803 106 151 0145845 A90712.2 1)

31/64 12.30 0.4842 106 151 0171103 A90731/64 1)

12.50 0.4921 106 151 0145852 A90712.5 1)

1/2 12.70 0.5000 106 151 0171110 A9071/2 1)

12.80 0.5039 106 151 0145869 A90712.8 1)

13.00 0.5118 106 151 0145876 A90713.0 1)

13.50 0.5314 115 160 0302897 A90713.5 1)

14.00 0.5511 115 160 0213896 A90714.0 1)

14.50 0.5708 121 169 0302903 A90714.5 1)

15.00 0.5905 121 169 0302910 A90715.0 1)

15.50 0.6102 130 178 0302927 A90715.5 1)

16.00 0.6299 130 178 0302934 A90716.0 1)

17.00 0.6693 125 184 0588147 A90717.0 1)

17.50 0.6890 130 191 0588154 A90717.5 1)

18.00 0.7087 130 198 0588161 A90718.0 1)2)

19.00 0.7480 135 205 0588178 A90719.0 1)2)

9.80 0.3858 87 133 0145715 A9079.89.90 0.3897 87 133 0145722 A9079.9

25/64 9.92 0.3905 87 133 0171042 A90725/6410.00 0.3937 87 133 0145739 A90710.010.20 0.4015 87 133 0145746 A90710.210.30 0.4055 87 133 0145753 A90710.3

13/32 10.32 0.4062 87 133 0171059 A90713/3210.40 0.4094 87 133 0145760 A90710.410.50 0.4133 87 133 0145777 A90710.5 20.00 0.7874 140 215 0588185 A90720.0 1)2)

1) Flute Lengths Longer than Standard 1) Gounjures plus longues que le standard 1) Longitudes del canal superiores a la standard 2) Overall Lengths Longer than Standard 2) Longueur totale plus longue que le standard 2) Longitudes totales superiores a la standard


A012

A012

■

●

d1Ø

d1Ømm

d1dec.Inch

l2Inch

l1Inch Stock #

EDP #ore-Code

80 0.343 0.0135 1/8 3/4 0574256 A012N8079 0.368 0.0145 1/8 3/4 0574249 A012N791/64 0.397 0.0156 3/16 3/4 0573952 A0121/6478 0.406 0.0160 3/16 7/8 0574232 A012N7877 0.457 0.0180 3/16 7/8 0574225 A012N7776 0.508 0.0200 3/16 7/8 0574218 A012N7675 0.533 0.0210 1/4 1“ 0574201 A012N7574 0.572 0.0225 1/4 1“ 0574195 A012N7473 0.610 0.0240 5/16 1.1/8 0574188 A012N7372 0.635 0.0250 5/16 1.1/8 0574171 A012N7271 0.660 0.0260 3/8 1.1/4 0574164 A012N7170 0.711 0.0280 3/8 1.1/4 0574157 A012N7069 0.742 0.0292 1/2 1.3/8 0574140 A012N6968 0.787 0.0310 1/2 1.3/8 0574133 A012N681/32 0.794 0.0312 1/2 1.3/8 0573969 A0121/3267 0.813 0.0320 1/2 1.3/8 0574126 A012N6766 0.838 0.0330 1/2 1.3/8 0574119 A012N6665 0.889 0.0350 5/8 1.1/2 0574102 A012N6564 0.914 0.0360 5/8 1.1/2 0574096 A012N6463 0.940 0.0370 5/8 1.1/2 0574089 A012N6362 0.965 0.0380 5/8 1.1/2 0574072 A012N6261 0.991 0.0390 11/16 1.5/8 0574065 A012N6160 1.016 0.0400 11/16 1.5/8 0574058 A012N6059 1.041 0.0410 11/16 1.5/8 0574041 A012N5958 1.067 0.0420 11/16 1.5/8 0574034 A012N5857 1.092 0.0430 3/4 1.3/4 0574027 A012N5756 1.181 0.0465 3/4 1.3/4 0574010 A012N563/64 1.191 0.0469 3/4 1.3/4 0573976 A0123/6455 1.321 0.0520 7/8 1.7/8 0574003 A012N5554 1.397 0.0550 7/8 1.7/8 0573990 A012N5453 1.511 0.0595 7/8 1.7/8 0573983 A012N531/16 1.588 0.0625 7/8 1.7/8 0578636 A0121/1652 1.613 0.0635 7/8 1.7/8 0578704 A012N5251 1.702 0.0670 1“ 2“ 0578698 A012N51

d1Ø

d1Ømm

d1dec.Inch

l2Inch

l1Inch Stock #

EDP #ore-Code

50 1.778 0.0700 1“ 2“ 0578681 A012N5049 1.854 0.0730 1“ 2“ 0578674 A012N4948 1.930 0.0760 1“ 2“ 0578667 A012N485/64 1.984 0.0781 1“ 2“ 0578643 A0125/6447 1.994 0.0785 1“ 2“ 0578650 A012N4746 2.057 0.0810 1.1/8 2.1/8 0571705 A012N4645 2.083 0.0820 1.1/8 2.1/8 0571699 A012N4544 2.184 0.0860 1.1/8 2.1/8 0571682 A012N4443 2.261 0.0890 1.1/4 2.1/4 0571675 A012N4342 2.375 0.0935 1.1/4 2.1/4 0571668 A012N423/32 2.381 0.0938 1.1/4 2.1/4 0572061 A0123/3241 2.438 0.0960 1.3/8 2.3/8 0571651 A012N4140 2.489 0.0980 1.3/8 2.3/8 0571644 A012N4039 2.527 0.0995 1.3/8 2.3/8 0571620 A012N3938 2.578 0.1015 1.7/16 2.1/2 0571613 A012N3837 2.642 0.1040 1.7/16 2.1/2 0571606 A012N3736 2.705 0.1065 1.7/16 2.1/2 0571590 A012N367/64 2.778 0.1094 1.1/2 2.5/8 0572184 A0127/6435 2.794 0.1100 1.1/2 2.5/8 0571583 A012N3534 2.819 0.1110 1.1/2 2.5/8 0571576 A012N3433 2.870 0.1130 1.1/2 2.5/8 0571569 A012N3332 2.946 0.1160 1.5/8 2.3/4 0571552 A012N3231 3.048 0.1200 1.5/8 2.3/4 0571545 A012N311/8 3.175 0.1250 1.5/8 2.3/4 0571897 A0121/830 3.264 0.1285 1.5/8 2.3/4 0571538 A012N3029 3.454 0.1360 1.3/4 2.7/8 0571514 A012N2928 3.569 0.1405 1.3/4 2.7/8 0571507 A012N289/64 3.572 0.1406 1.3/4 2.7/8 0572214 A0129/6427 3.658 0.1440 1.7/8 3“ 0571491 A012N2726 3.734 0.1470 1.7/8 3“ 0571484 A012N2625 3.797 0.1495 1.7/8 3“ 0571477 A012N2524 3.861 0.1520 2“ 3.1/8 0571460 A012N2423 3.912 0.1540 2“ 3.1/8 0571453 A012N235/32 3.969 0.1562 2“ 3.1/8 0572146 A0125/32

Bright finish below 2.0 mm, TiN Tipped 2.0 mm and above No split point below 2.00 mm

● Foret court● Jobber Drill ● Broca , serie corta


A012 d1Ø

d1Ømm

d1dec.Inch

l2Inch

l1Inch Stock #

EDP #ore-Code

22 3.988 0.1570 2“ 3.1/8 0571446 A012N2221 4.039 0.1590 2.1/8 3.1/4 0571439 A012N2120 4.089 0.1610 2.1/8 3.1/4 0571422 A012N2019 4.216 0.1660 2.1/8 3.1/4 0571408 A012N1918 4.305 0.1695 2.1/8 3.1/4 0571392 A012N1811/64 4.366 0.1719 2.1/8 3.1/4 0571910 A01211/6417 4.394 0.1730 2.3/16 3.3/8 0571385 A012N1716 4.496 0.1770 2.3/16 3.3/8 0571378 A012N1615 4.572 0.1800 2.3/16 3.3/8 0571361 A012N1514 4.623 0.1820 2.3/16 3.3/8 0571354 A012N1413 4.700 0.1850 2.5/16 3.1/2 0571347 A012N133/16 4.762 0.1875 2.5/16 3.1/2 0572054 A0123/1612 4.800 0.1890 2.5/16 3.1/2 0571330 A012N1211 4.851 0.1910 2.5/16 3.1/2 0571323 A012N1110 4.915 0.1935 2.7/16 3.5/8 0571316 A012N109 4.978 0.1960 2.7/16 3.5/8 0571750 A012N98 5.055 0.1990 2.7/16 3.5/8 0571743 A012N87 5.105 0.2010 2.7/16 3.5/8 0571736 A012N713/64 5.159 0.2031 2.7/16 3.5/8 0571934 A01213/646 5.182 0.2040 2.1/2 3.3/4 0571729 A012N65 5.220 0.2055 2.1/2 3.3/4 0571712 A012N54 5.309 0.2090 2.1/2 3.3/4 0571637 A012N43 5.410 0.2130 2.1/2 3.3/4 0571521 A012N37/32 5.556 0.2188 2.1/2 3.3/4 0572177 A0127/322 5.613 0.2210 2.5/8 3.7/8 0571415 A012N21 5.791 0.2280 2.5/8 3.7/8 0571309 A012N1A 5.944 0.2340 2.5/8 3.7/8 0571163 A012A15/64 5.953 0.2344 2.5/8 3.7/8 0571958 A01215/64B 6.045 0.2380 2.3/4 4“ 0571170 A012BC 6.147 0.2420 2.3/4 4“ 0571187 A012CD 6.248 0.2460 2.3/4 4“ 0571194 A012D1/4 6.350 0.2500 2.3/4 4“ 0571125 A0121/4E 6.350 0.2500 2.3/4 4“ 0571200 A012EF 6.528 0.2570 2.7/8 4.1/8 0571217 A012FG 6.629 0.2610 2.7/8 4.1/8 0571224 A012G17/64 6.747 0.2656 2.7/8 4.1/8 0571972 A01217/64H 6.756 0.2660 2.7/8 4.1/8 0571231 A012HI 6.909 0.2720 2.7/8 4.1/8 0571248 A012IJ 7.036 0.2770 2.7/8 4.1/8 0571255 A012JK 7.137 0.2810 2.15/16 4.1/4 0571262 A012K

d1Ø

d1Ømm

d1dec.Inch

l2

Inch

l1

Inch Stock #

EDP #ore-Code

U 9.347 0.3680 3.5/8 5“ 0571828 A012U3/8 9.525 0.3750 3.5/8 5“ 0572078 A0123/8V 9.576 0.3770 3.5/8 5“ 0571835 A012VW 9.804 0.3860 3.3/4 5.1/8 0571842 A012W25/64 9.922 0.3906 3.3/4 5.1/8 0572023 A01225/64X 10.084 0.3970 3.3/4 5.1/8 0571859 A012XY 10.262 0.4040 3.7/8 5.1/4 0571866 A012Y13/32 10.319 0.4062 3.7/8 5.1/4 0571927 A01213/32Z 10.490 0.4130 3.7/8 5.1/4 0571873 A012Z27/64 10.716 0.4219 3.15/16 5.3/8 0572030 A01227/647/16 11.112 0.4375 4.1/16 5.1/2 0572160 A0127/1629/64 11.509 0.4531 4.3/16 5.5/8 0572047 A01229/6415/32 11.906 0.4688 4.5/16 5.3/4 0571941 A01215/3231/64 12.303 0.4844 4.3/8 5.7/8 0572085 A01231/641/2 12.700 0.5000 4.1/2 6“ 0571880 A0121/233/64 13.097 0.5156 4.13/16 6.5/8 0572092 A01233/6417/32 13.494 0.5312 4.13/16 6.5/8 0571965 A01217/3235/64 13.891 0.5469 4.13/16 6.5/8 0572108 A01235/649/16 14.288 0.5625 4.13/16 6.5/8 0572191 A0129/1637/64 14.684 0.5781 4.13/16 6.5/8 0572115 A01237/6419/32 15.081 0.5938 5.3/16 7.1/8 0571989 A01219/3239/64 15.478 0.6094 5.3/16 7.1/8 0572122 A01239/645/8 15.875 0.6250 5.3/16 7.1/8 0572153 A0125/821/32 16.669 0.6562 5.3/16 7.1/8 0578728 A01221/3211/16 17.462 0.6875 5.5/8 7.5/8 0578711 A01211/1645/64 17.859 0.7031 5.5/8 7.7/8 0578742 A01245/6423/32 18.256 0.7188 5.5/8 7.7/8 0578735 A01223/3247/64 18.653 0.7343 6“ 8“ 0578766 A01247/643/4 18.653 0.7500 6“ 8“ 0578759 A0123/4

R 8.611 0.3390 3.7/16 4.3/4 0571798 A012R11/32 8.731 0.3438 3.7/16 4.3/4 0571903 A01211/32S 8.839 0.3480 3.1/2 4.7/8 0571804 A012ST 9.093 0.3580 3.1/2 4.7/8 0571811 A012T23/64 9.128 0.3594 3.1/2 4.7/8 0572016 A01223/64

N 7.671 0.3020 3.1/16 4.3/8 0571293 A012N5/16 7.938 0.3125 3.3/16 4.1/2 0572139 A0125/16O 8.026 0.3160 3.3/16 4.1/2 0571767 A012OP 8.204 0.3230 3.5/16 4.5/8 0571774 A012P21/64 8.334 0.3281 3.5/16 4.5/8 0572009 A01221/64Q 8.433 0.3320 3.7/16 4.3/4 0571781 A012Q

9/32 7.144 0.2812 2.15/16 4.1/4 0572207 A0129/32L 7.366 0.2900 2.15/16 4.1/4 0571279 A012LM 7.493 0.2950 3.1/16 4.3/8 0571286 A012M19/64 7.541 0.2969 3.1/16 4.3/8 0571996 A01219/64



● Foret court

A002

A002

■

●

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

1.00 0.0393 12 34 0376782 A0021.01.10 0.0433 14 36 0376799 A0021.11.20 0.0472 16 38 0376805 A0021.21.30 0.0511 16 38 0376812 A0021.31.40 0.0551 18 40 0376829 A0021.41.50 0.0590 18 40 0376836 A0021.51.60 0.0629 20 43 0376843 A0021.61.70 0.0669 20 43 0376850 A0021.71.80 0.0708 22 46 0376867 A0021.81.90 0.0748 22 46 0376874 A0021.92.00 0.0787 24 49 0376041 A0022.02.10 0.0826 24 49 0376058 A0022.12.20 0.0866 27 53 0376898 A0022.22.30 0.0905 27 53 0376904 A0022.32.40 0.0944 30 57 0376911 A0022.42.50 0.0984 30 57 0376065 A0022.52.60 0.1023 30 57 0376072 A0022.62.70 0.1062 33 61 0376089 A0022.72.80 0.1102 33 61 0376096 A0022.82.90 0.1141 33 61 0376102 A0022.93.00 0.1181 33 61 0350577 A0023.03.10 0.1220 36 65 0350584 A0023.13.20 0.1259 36 65 0350607 A0023.23.25 0.1280 36 65 0605356 A0023.253.30 0.1299 36 65 0350614 A0023.33.40 0.1338 39 70 0350621 A0023.43.50 0.1377 39 70 0350638 A0023.53.60 0.1417 39 70 0350652 A0023.63.70 0.1456 39 70 0350669 A0023.73.80 0.1496 43 75 0350676 A0023.83.90 0.1535 43 75 0350683 A0023.94.00 0.1574 43 75 0350706 A0024.04.10 0.1614 43 75 0350713 A0024.14.20 0.1653 43 75 0350720 A0024.2

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

4.30 0.1692 47 80 0350737 A0024.34.40 0.1732 47 80 0350751 A0024.44.50 0.1771 47 80 0350768 A0024.54.60 0.1811 47 80 0350775 A0024.64.70 0.1850 47 80 0350782 A0024.74.80 0.1889 52 86 0350805 A0024.84.90 0.1929 52 86 0350812 A0024.95.00 0.1968 52 86 0350829 A0025.05.10 0.2007 52 86 0350836 A0025.15.20 0.2047 52 86 0350850 A0025.25.30 0.2086 52 86 0350867 A0025.35.40 0.2125 57 93 0350874 A0025.45.50 0.2165 57 93 0350881 A0025.55.60 0.2204 57 93 0350904 A0025.65.70 0.2244 57 93 0350911 A0025.75.80 0.2283 57 93 0350928 A0025.85.90 0.2322 57 93 0350935 A0025.96.00 0.2362 57 93 0350959 A0026.06.10 0.2401 63 101 0350966 A0026.16.20 0.2440 63 101 0350973 A0026.26.30 0.2480 63 101 0350980 A0026.36.40 0.2519 63 101 0351000 A0026.46.50 0.2559 63 101 0351017 A0026.56.60 0.2598 63 101 0351024 A0026.66.70 0.2637 63 101 0351031 A0026.76.80 0.2677 69 109 0351055 A0026.86.90 0.2716 69 109 0351062 A0026.97.00 0.2755 69 109 0351079 A0027.07.10 0.2795 69 109 0351086 A0027.17.20 0.2834 69 109 0351109 A0027.27.30 0.2874 69 109 0351116 A0027.37.40 0.2913 69 109 0351123 A0027.47.50 0.2952 69 109 0351130 A0027.57.60 0.2992 75 117 0351154 A0027.6

● Jobber Drill ● Broca , serie corta



A002d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

7.70 0.3031 75 117 0351161 A0027.77.80 0.3070 75 117 0351178 A0027.87.90 0.3110 75 117 0351185 A0027.98.00 0.3149 75 117 0351208 A0028.08.10 0.3188 75 117 0351215 A0028.18.20 0.3228 75 117 0351222 A0028.28.30 0.3267 75 117 0351239 A0028.38.40 0.3307 75 117 0351253 A0028.48.50 0.3346 75 117 0351260 A0028.58.60 0.3385 81 125 0351277 A0028.68.70 0.3425 81 125 0351284 A0028.78.80 0.3464 81 125 0351307 A0028.88.90 0.3503 81 125 0351314 A0028.99.00 0.3543 81 125 0351321 A0029.09.10 0.3582 81 125 0351338 A0029.19.20 0.3622 81 125 0351352 A0029.29.30 0.3661 81 125 0351369 A0029.39.40 0.3700 81 125 0351376 A0029.49.50 0.3740 81 125 0351383 A0029.59.60 0.3779 87 133 0351406 A0029.69.70 0.3818 87 133 0351413 A0029.79.80 0.3858 87 133 0351420 A0029.89.90 0.3897 87 133 0351437 A0029.910.00 0.3937 87 133 0351451 A00210.010.10 0.3976 87 133 0351468 A00210.110.20 0.4015 87 133 0351475 A00210.210.30 0.4055 87 133 0351482 A00210.310.40 0.4094 87 133 0351505 A00210.410.50 0.4133 87 133 0351512 A00210.510.60 0.4173 87 133 0351529 A00210.610.70 0.4212 94 142 0351536 A00210.710.80 0.4251 94 142 0351550 A00210.810.90 0.4291 94 142 0351567 A00210.911.00 0.4330 94 142 0351574 A00211.011.10 0.4370 94 142 0351581 A00211.111.20 0.4409 94 142 0351604 A00211.211.30 0.4448 94 142 0351611 A00211.311.40 0.4488 94 142 0351628 A00211.4

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

11.50 0.4527 94 142 0351635 A00211.511.60 0.4566 94 142 0351659 A00211.611.70 0.4606 94 142 0351666 A00211.711.80 0.4645 94 142 0351673 A00211.811.90 0.4685 101 151 0351680 A00211.912.00 0.4724 101 151 0351703 A00212.012.10 0.4763 101 151 0351710 A00212.112.20 0.4803 101 151 0351727 A00212.212.30 0.4842 101 151 0351734 A00212.312.40 0.4881 101 151 0351758 A00212.412.50 0.4920 101 151 0351765 A00212.512.60 0.4960 101 151 0351772 A00212.612.70 0.5000 101 151 0351796 A00212.712.80 0.5039 101 151 0351802 A00212.812.90 0.5078 101 151 0351819 A00212.913.00 0.5118 101 151 0351826 A00213.013.10 0.5157 101 151 0385180 A00213.113.20 0.5196 101 151 0385524 A00213.213.25 0.5216 108 160 0385579 A00213.2513.30 0.5236 108 160 0385197 A00213.313.40 0.5275 108 160 0385531 A00213.413.50 0.5314 108 160 0385548 A00213.513.60 0.5354 108 160 0385203 A00213.613.70 0.5393 108 160 0385210 A00213.713.75 0.5413 108 160 0385586 A00213.7513.80 0.5433 108 160 0385227 A00213.813.90 0.5472 108 160 0385494 A00213.914.00 0.5511 108 160 0384497 A00214.014.25 0.5610 114 169 0385234 A00214.2514.50 0.5708 114 169 0385241 A00214.514.75 0.5807 114 169 0385258 A00214.7515.00 0.5905 114 169 0385265 A00215.015.25 0.6003 120 178 0385272 A00215.2515.50 0.6102 120 178 0385289 A00215.515.75 0.6200 120 178 0385296 A00215.7516.00 0.6299 120 178 0385302 A00216.0


QC21CO

QC21CO

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 01350452 0.0635 7/8 2“ 01575251 0.0670 1“ 2“ 01575150 0.0700 1“ 2“ 01575049 0.0730 1“ 2“ 01574948 0.0760 1“ 2“ 0157485/64 0.0781 1“ 2“ 01350547 0.0785 1“ 2“ 01574746 0.0810 1.1/8 2.1/8 01574645 0.0820 1.1/8 2.1/8 01574544 0.0860 1.1/8 2.1/8 01574443 0.0890 1.1/4 2.1/4 01574342 0.0935 1.1/4 2.1/4 0157423/32 0.0938 1.1/4 2.1/4 01350641 0.0960 1.3/8 2.3/8 01574140 0.0980 1.3/8 2.3/8 01574039 0.0995 1.3/8 2.3/8 01573938 0.1015 1.7/16 2.1/2 01573837 0.1040 1.7/16 2.1/2 01573736 0.1065 1.7/16 2.1/2 0157367/64 0.1094 1.1/2 2.5/8 01350735 0.1100 1.1/2 2.5/8 01573534 0.1110 1.1/2 2.5/8 01573433 0.1130 1.1/2 2.5/8 01573332 0.1160 1.5/8 2.3/4 01573231 0.1200 1.5/8 2.3/4 0157311/8 0.1250 1.5/8 2.3/4 01350830 0.1285 1.5/8 2.3/4 01573029 0.1360 1.3/4 2.7/8 01572928 0.1405 1.3/4 2.7/8 0157289/64 0.1406 1.3/4 2.7/8 01350927 0.1440 1.7/8 3“ 01572726 0.1470 1.7/8 3“ 01572625 0.1495 1.7/8 3“ 015725

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

24 0.1520 2“ 3.1/8 01572423 0.1540 2“ 3.1/8 0157235/32 0.1562 2“ 3.1/8 01351022 0.1570 2“ 3.1/8 01572221 0.1590 2.1/8 3.1/4 01572120 0.1610 2.1/8 3.1/4 01572019 0.1660 2.1/8 3.1/4 01571918 0.1695 2.1/8 3.1/4 01571811/64 0.1719 2.1/8 3.1/4 01351117 0.1730 2.3/16 3.3/8 01571716 0.1770 2.3/16 3.3/8 01571615 0.1800 2.3/16 3.3/8 01571514 0.1820 2.3/16 3.3/8 01571413 0.1850 2.5/16 3.1/2 0157133/16 0.1875 2.5/16 3.1/2 01351212 0.1890 2.5/16 3.1/2 01571211 0.1910 2.5/16 3.1/2 01571110 0.1935 2.7/16 3.5/8 0157109 0.1960 2.7/16 3.5/8 0157098 0.1990 2.7/16 3.5/8 0157087 0.2010 2.7/16 3.5/8 01570713/64 0.2031 2.7/16 3.5/8 0135136 0.2040 2.1/2 3.3/4 0157065 0.2055 2.1/2 3.3/4 0157054 0.2090 2.1/2 3.3/4 0157043 0.2130 2.1/2 3.3/4 0157037/32 0.2188 2.1/2 3.3/4 0135142 0.2210 2.5/8 3.7/8 0157021 0.2280 2.5/8 3.7/8 015701A 0.2340 2.5/8 3.7/8 01360115/64 0.2344 2.5/8 3.7/8 013515B 0.2380 2.3/4 4“ 013602C 0.2420 2.3/4 4“ 013603D 0.2460 2.3/4 4“ 013604

● Wide-land parabolic flute ● Canal Parabólico● Goujure Parabolique● Foret court● Jobber Drill ● Broca , serie corta


QC21CO - QC21COM d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

E 0.2500 2.3/4 4“ 0136051/4 0.2500 2.3/4 4“ 013516F 0.2570 2.7/8 4.1/8 013606G 0.2610 2.7/8 4.1/8 01360717/64 0.2656 2.7/8 4.1/8 013517H 0.2660 2.7/8 4.1/8 013608I 0.2720 2.7/8 4.1/8 013609J 0.2770 2.7/8 4.1/8 013610K 0.2810 2.15/16 4.1/4 0136119/32 0.2812 2.15/16 4.1/4 013518L 0.2900 2.15/16 4.1/4 013612M 0.2950 3.1/16 4.3/8 01361319/64 0.2969 3.1/16 4.3/8 013519N 0.3020 3.1/16 4.3/8 0136145/16 0.3125 3.3/16 4.1/2 013520O 0.3160 3.3/16 4.1/2 013615P 0.3230 3.5/16 4.5/8 01361621/64 0.3281 3.5/16 4.5/8 013521Q 0.3320 3.7/16 4.3/4 013617R 0.3390 3.7/16 4.3/4 013618

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

11/32 0.3438 3.7/16 4.3/4 013522S 0.3480 3.1/2 4.7/8 013619T 0.3580 3.1/2 4.7/8 01362023/64 0.3594 3.1/2 4.7/8 013523U 0.3680 3.5/8 5“ 0136213/8 0.3750 3.5/8 5“ 013524V 0.3770 3.5/8 5“ 013622W 0.3860 3.3/4 5.1/8 01362325/64 0.3906 3.3/4 5.1/8 013525X 0.3970 3.3/4 5.1/8 013624Y 0.4040 3.7/8 5.1/4 01362513/32 0.4062 3.7/8 5.1/4 013526Z 0.4130 3.7/8 5.1/4 01362627/64 0.4219 3.15/16 5.3/8 0135277/16 0.4375 4.1/16 5.1/2 01352829/64 0.4531 4.3/16 5.5/8 01352915/32 0.4688 4.5/16 5.3/4 01353031/64 0.4844 4.3/8 5.7/8 0135311/2 0.5000 4.1/2 6“ 013532

QC21COM

■

●

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

1.50 0.0591 18 40 0167152.00 0.0787 24 49 0167202.50 0.0984 30 57 0167253.00 0.1181 33 61 0167303.50 0.1378 39 70 0167354.00 0.1575 43 75 0167404.50 0.1772 47 80 0167455.00 0.1969 52 86 0167505.20 0.2047 52 86 0167525.50 0.2165 57 93 0167555.60 0.2205 57 93 0167566.00 0.2362 57 93 0167606.50 0.2559 63 101 0167656.80 0.2677 69 109 0167687.00 0.2758 69 109 0167707.50 0.2953 69 109 0167758.00 0.3150 75 117 0167808.20 0.3228 75 117 016782

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

8.50 0.3346 75 117 0167858.60 0.3386 81 125 0167869.00 0.3543 81 125 0167909.50 0.3740 81 125 01679510.00 0.3937 87 133 01680010.50 0.4134 87 133 01680511.00 0.4331 94 142 01681011.50 0.4528 94 142 01681512.00 0.4724 101 151 01682012.50 0.4921 101 151 01682513.00 0.5118 101 151 016830




QC21V

QC21V

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 08140452 0.0635 7/8 1.7/8 08045251 0.0670 1“ 2“ 08045150 0.0700 1“ 2“ 08045049 0.0730 1“ 2“ 08044948 0.0760 1“ 2“ 0804485/64 0.0781 1“ 2“ 08140547 0.0785 1“ 2“ 08044746 0.0810 1.1/8 2.1/8 08044645 0.0820 1.1/8 2.1/8 08044544 0.0860 1.1/8 2.1/8 08044443 0.0890 1.1/4 2.1/4 08044342 0.0935 1.1/4 2.1/4 0804423/32 0.0938 1.1/4 2.1/4 08140641 0.0960 1.3/8 2.3/8 08044140 0.0980 1.3/8 2.3/8 08044039 0.0995 1.3/8 2.3/8 08043938 0.1015 1.7/16 2.1/2 08043837 0.1040 1.7/16 2.1/2 08043736 0.1065 1.7/16 2.1/2 0804367/64 0.1094 1.1/2 2.5/8 08140735 0.1100 1.1/2 2.5/8 08043534 0.1110 1.1/2 2.5/8 08043433 0.1130 1.1/2 2.5/8 08043332 0.1160 1.5/8 2.3/4 08043231 0.1200 1.5/8 2.3/4 0804311/8 0.1250 1.5/8 2.3/4 08140830 0.1285 1.5/8 2.3/4 08043029 0.1360 1.3/4 2.7/8 08042928 0.1405 1.3/4 2.7/8 0804289/64 0.1406 1.3/4 2.7/8 08140927 0.1440 1.7/8 3“ 08042726 0.1470 1.7/8 3“ 08042625 0.1495 1.7/8 3“ 08042524 0.1520 2“ 3.1/8 08042423 0.1540 2“ 3.1/8 0804235/32 0.1562 2“ 3.1/8 08141022 0.1570 2“ 3.1/8 08042221 0.1590 2.1/8 3.1/4 08042120 0.1610 2.1/8 3.1/4 080420

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

19 0.1660 2.1/8 3.1/4 08041918 0.1695 2.1/8 3.1/4 08041811/64 0.1719 2.1/8 3.1/4 08141117 0.1730 2.3/16 3.3/8 08041716 0.1770 2.3/16 3.3/8 08041615 0.1800 2.3/16 3.3/8 08041514 0.1820 2.3/16 3.3/8 08041413 0.1850 2.5/16 3.1/2 0804133/16 0.1875 2.5/16 3.1/2 08141212 0.1890 2.5/16 3.1/2 08041211 0.1910 2.5/16 3.1/2 08041110 0.1935 2.7/16 3.5/8 0804109 0.1960 2.7/16 3.5/8 0804098 0.1990 2.7/16 3.5/8 0804087 0.2010 2.7/16 3.5/8 08040713/64 0.2031 2.7/16 3.5/8 0814136 0.2040 2.1/2 3.3/4 0804065 0.2055 2.1/2 3.3/4 0804054 0.2090 2.1/2 3.3/4 0804043 0.2130 2.1/2 3.3/4 0804037/32 0.2188 2.1/2 3.3/4 0814142 0.2210 2.5/8 3.7/8 0804021 0.2280 2.5/8 3.7/8 08040115/64 0.2344 2.5/8 3.7/8 0814151/4 0.2500 2.3/4 4“ 08141617/64 0.2656 2.7/8 4.1/8 0814179/32 0.2812 2.15/16 4.1/4 08141819/64 0.2969 3.1/16 4.3/8 0814195/16 0.3125 3.3/16 4.1/2 08142021/64 0.3281 3.5/16 4.5/8 08142111/32 0.3438 3.7/16 4.3/4 08142223/64 0.3594 3.1/2 4.7/8 0814233/8 0.3750 3.5/8 5“ 08142425/64 0.3906 3.3/4 5.1/8 08142513/32 0.4062 3.7/8 5.1/4 08142627/64 0.4219 3.15/16 5.3/8 0814277/16 0.4375 4.1/16 5.1/2 08142829/64 0.4531 4.3/16 5.5/8 08142915/32 0.4688 4.5/16 5.3/4 08143031/64 04844 4.3/8 5.7/8 0814311/2 0.5000 4.1/2 6“ 081432



QC21G

QC21G

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 08170452 0.0635 7/8 1.7/8 08055251 0.0670 1“ 2“ 08055150 0.0700 1“ 2“ 08055049 0.0730 1“ 2“ 08054948 0.0760 1“ 2“ 0805485/64 0.0781 1“ 2“ 08170547 0.0785 1“ 2“ 08054746 0.0810 1.1/8 2.1/8 08054645 0.0820 1.1/8 2.1/8 08054544 0.0860 1.1/8 2.1/8 08054443 0.0890 1.1/4 2.1/4 08054342 0.0935 1.1/4 2.1/4 0805423/32 0.0938 1.1/4 2.1/4 08170641 0.0960 1.3/8 2.3/8 08054140 0.0980 1.3/8 2.3/8 08054039 0.0995 1.3/8 2.3/8 08053938 0.1015 1.7/16 2.1/2 08053837 0.1040 1.7/16 2.1/2 08053736 0.1065 1.7/16 2.1/2 0805367/64 0.1094 1.1/2 2.5/8 08170735 0.1100 1.1/2 2.5/8 08053534 0.1110 1.1/2 2.5/8 08053433 0.1130 1.1/2 2.5/8 08053332 0.1160 1.5/8 2.3/4 08053231 0.1200 1.5/8 2.3/4 0805311/8 0.1250 1.5/8 2.3/4 08170830 0.1285 1.5/8 2.3/4 08053029 0.1360 1.3/4 2.7/8 08052928 0.1405 1.3/4 2.7/8 0805289/64 0.1406 1.3/4 2.7/8 08170927 0.1440 1.7/8 3“ 08052726 0.1470 1.7/8 3“ 08052625 0.1495 1.7/8 3“ 08052524 0.1520 2“ 3.1/8 08052423 0.1540 2“ 3.1/8 0805235/32 0.1562 2“ 3.1/8 08171022 0.1570 2“ 3.1/8 08052221 0.1590 2.1/8 3.1/4 08052120 0.1610 2.1/8 3.1/4 080520

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

19 0.1660 2.1/8 3.1/4 08051918 0.1695 2.1/8 3.1/4 08051811/64 0.1719 2.1/8 3.1/4 08171117 0.1730 2.3/16 3.3/8 08051716 0.1770 2.3/16 3.3/8 08051615 0.1800 2.3/16 3.3/8 08051514 0.1820 2.3/16 3.3/8 08051413 0.1850 2.5/16 3.1/2 0805133/16 0.1875 2.5/16 3.1/2 08171212 0.1890 2.5/16 3.1/2 08051211 0.1910 2.5/16 3.1/2 08051110 0.1935 2.7/16 3.5/8 0805109 0.1960 2.7/16 3.5/8 0805098 0.1990 2.7/16 3.5/8 0805087 0.2010 2.7/16 3.5/8 08050713/64 0.2031 2.7/16 3.5/8 0817136 0.2040 2.1/2 3.3/4 0805065 0.2055 2.1/2 3.3/4 0805054 0.2090 2.1/2 3.3/4 0805043 0.2130 2.1/2 3.3/4 0805037/32 0.2188 2.1/2 3.3/4 0817142 0.2210 2.5/8 3.7/8 0805021 0.2280 2.5/8 3.7/8 08050115/64 0.2344 2.5/8 3.7/8 0817151/4 0.2500 2.3/4 4“ 08171617/64 0.2656 2.7/8 4.1/8 0817179/32 0.2812 2.15/16 4.1/4 08171819/64 0.2969 3.1/16 4.3/8 0817195/16 0.3125 3.3/16 4.1/2 08172021/64 0.3281 3.5/16 4.5/8 08172111/32 0.3438 3.7/16 4.3/4 08172223/64 0.3594 3.1/2 4/7/8 0817233/8 0.3750 3.5/8 5“ 08172425/64 0.3906 3.3/4 5.1/8 08172513/32 0.4062 3.7/8 5.1/4 0817267/16 0.4375 4.1/16 5.1/2 08172829/64 0.4531 4.3/16 5.5/8 08172915/32 0.4688 4.5/16 5.3/4 08173031/64 0.4844 4.3/8 5.7/8 0817311/2 0.5000 4.1/2 6“ 081732



5/16 0.3125 3.3/16 4.1/2 08162021/64 0.3281 3.5/16 4.5/8 08162111/32 0.3438 3.7/16 4.3/4 08162223/64 0.3594 3.1/2 4.7/8 0816233/8 0.3750 3.5/8 5“ 08162425/64 0.3906 3.3/4 5.1/8 08162513/32 0.4062 3.7/8 5.1/4 08162627/64 0.4219 3.15/16 5.3/8 0816277/16 0.4375 4.1/16 5.1/2 08162829/64 0.4531 4.3/16 5.5/8 08162915/32 0.4688 4.5/16 5.3/4 08163031/64 0.4844 4.3/8 5.7/8 0816311/2 0.5000 4.1/2 6“ 081632

QC21

QC21

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 08160452 0.0635 7/8 1.7/8 08065251 0.0670 1“ 2“ 08065150 0.0700 1“ 2“ 08065049 0.0730 1“ 2“ 08064948 0.0760 1“ 2“ 0806485/64 0.0781 1“ 2“ 08160547 0.0785 1“ 2“ 08064746 0.0810 1.1/8 2.1/8 08064645 0.0820 1.1/8 2.1/8 08064544 0.0860 1.1/8 2.1/8 08064443 0.0890 1.1/4 2.1/4 08064342 0.0935 1.1/4 2.1/4 0806423/32 0.0938 1.1/4 2.1/4 08160641 0.0960 1.3/8 2.3/8 08064140 0.0980 1.3/8 2.3/8 08064039 0.0995 1.3/8 2.3/8 08063938 0.1015 1.7/16 2.1/2 08063837 0.1040 1.7/16 2.1/2 08063736 0.1065 1.7/16 2.1/2 0806367/64 0.1094 1.1/2 2.5/8 08160735 0.1100 1.1/2 2.5/8 08063534 0.1110 1.1/2 2.5/8 08063433 0.1130 1.1/2 2.5/8 08063332 0.1160 1.5/8 2.3/4 08063231 0.1200 1.5/8 2.3/4 0806311/8 0.1250 1.5/8 2.3/4 08160830 0.1285 1.5/8 2.3/4 08063029 0.1360 1.3/4 2.7/8 08062928 0.1405 1.3/4 2.7/8 0806289/64 0.1406 1.3/4 2.7/8 08160927 0.1440 1.7/8 3“ 08062726 0.1470 1.7/8 3“ 08062625 0.1495 1.7/8 3“ 08062524 0.1520 2“ 3.1/8 08062423 0.1540 2“ 3.1/8 0806235/32 0.1562 2“ 3.1/8 08161022 0.1570 2“ 3.1/8 08062221 0.1590 2.1/8 3.1/4 08062120 0.1610 2.1/8 3.1/4 08062019 0.1660 2.1/8 3.1/4 08061918 0.1695 2.1/8 3.1/4 080618

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

11/64 0.1719 2.1/8 3.1/4 08161117 0.1730 2.3/16 3.3/8 08061716 0.1770 2.3/16 3.3/8 08061615 0.1800 2.3/16 3.3/8 08061514 0.1820 2.3/16 3.3/8 08061413 0.1850 2.5/16 3.1/2 0806133/16 0.1875 2.5/16 3.1/2 08161212 0.1890 2.5/16 3.1/2 08061211 0.1910 2.5/16 3.1/2 08061110 0.1935 2.7/16 3.5/8 0806109 0.1960 2.7/16 3.5/8 0806098 0.1990 2.7/16 3.5/8 0806087 0.2010 2.7/16 3.5/8 08060713/64 0.2031 2.7/16 3.5/8 0816136 0.2040 2.1/2 3.3/4 0806065 0.2055 2.1/2 3.3/4 0806054 0.2090 2.1/2 3.3/4 0806043 0.2130 2.1/2 3.3/4 0806037/32 0.2188 2.1/2 3.3/4 0816142 0.2210 2.5/8 3.7/8 0806021 0.2280 2.5/8 3.7/8 08060115/64 0.2344 2.5/8 3.7/8 0816151/4 0.2500 2.3/4 4“ 08161617/64 0.2656 2.7/8 4.1/8 0816179/32 0.2812 2.15/16 4.1/4 08161819/64 0.2969 3.1/16 4.3/8 081619



QC21P

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 01580452 0.0635 7/8 1.7/8 01945251 0.0670 1“ 2“ 01945150 0.0700 1“ 2“ 01945049 0.0730 1“ 2“ 01944948 0.0760 1“ 2“ 0194485/64 0.0781 1“ 2“ 01580547 0.0785 1“ 2“ 01944746 0.0810 1.1/8 2.1/8 01944645 0.0820 1.1/8 2.1/8 01944544 0.0860 1.1/8 2.1/8 01944443 0.0890 1.1/4 2.1/4 01944342 0.0935 1.1/4 2.1/4 0194423/32 0.0938 1.1/4 2.1/4 01580641 0.0960 1.3/8 2.3/8 01944140 0.0980 1.3/8 2.3/8 01944039 0.0995 1.3/8 2.3/8 01943938 0.1015 1.7/16 2.1/2 01943837 0.1040 1.7/16 2.1/2 01943736 0.1065 1.7/16 2.1/2 0194367/64 0.1094 1.1/2 2.5/8 01580735 0.1100 1.1/2 2.5/8 01943534 0.1110 1.1/2 2.5/8 01943433 0.1130 1.1/2 2.5/8 01943332 0.1160 1.5/8 2.3/4 01943231 0.1200 1.5/8 2.3/4 0194311/8 0.1250 1.5/8 2.3/4 01580830 0.1285 1.5/8 2.3/4 01943029 0.1360 1.3/4 2.7/8 01942928 0.1405 1.3/4 2.7/8 0194289/64 0.1406 1.3/4 2.7/8 01580927 0.1440 1.7/8 3“ 01942726 0.1470 1.7/8 3“ 01942625 0.1495 1.7/8 3“ 01942524 0.1520 2“ 3.1/8 01942423 0.1540 2“ 3.1/8 0194235/32 0.1562 2“ 3.1/8 01581022 0.1570 2“ 3.1/8 01942221 0.1590 2.1/8 3.1/4 01942120 0.1610 2.1/8 3.1/4 019420

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

19 0.1660 2.1/8 3.1/4 01941918 0.1695 2.1/8 3.1/4 01941811/64 0.1719 2.1/8 3.1/4 01581117 0.1730 2.3/16 3.3/8 01941716 0.1770 2.3/16 3.3/8 01941615 0.1800 2.3/16 3.3/8 01941514 0.1820 2.3/16 3.3/8 01941413 0.1850 2.5/16 3.1/2 0194133/16 0.1875 2.5/16 3.1/2 01581212 0.1890 2.5/16 3.1/2 01941211 0.1910 2.5/16 3.1/2 01941110 0.1935 2.7/16 3.5/8 0194109 0.1960 2.7/16 3.5/8 0194098 0.1990 2.7/16 3.5/8 0194087 0.2010 2.7/16 3.5/8 01940713/64 0.2031 2.7/16 3.5/8 0158136 0.2040 2.1/2 3.3/4 0194065 0.2055 2.1/2 3.3/4 0194054 0.2090 2.1/2 3.3/4 0194043 0.2130 2.1/2 3.3/4 0194037/32 0.2188 2.1/2 3.3/4 0158142 0.2210 2.5/8 3.7/8 0194021 0.2280 2.5/8 3.7/8 019401A 0.2340 2.5/8 3.7/8 01930115/64 0.2344 2.5/8 3.7/8 015815B 0.2380 2.3/4 4“ 019302C 0.2420 2.3/4 4“ 019303D 0.2460 2.3/4 4“ 019304E 0.2500 2.3/4 4“ 0193051/4 0.2500 2.3/4 4“ 015816F 0.2570 2.7/8 4.1/8 019306G 0.2610 2.7/8 4.1/8 01930717/64 0.2656 2.7/8 4.1/8 015817H 0.2660 2.7/8 4.1/8 019308I 0.2720 2.7/8 4.1/8 019309J 0.2770 2.7/8 4.1/8 019310K 0.2810 2.15/16 4.1/4 0193119/32 0.2812 2.15/16 4.1/4 015818L 0.2900 2.15/16 4.1/4 019312

QC21P

■

●



QC21P - QC21GM

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

M 0.2950 3.1/16 4.3/8 01931319/64 0.2969 3.1/16 4.3/8 015819N 0.3020 3.1/16 4.3/8 0193145/16 0.3125 3.3/16 4.1/2 015820O 0.3160 3.3/16 4.1/2 019315P 0.3230 3.5/16 4.5/8 01931621/64 0.3281 3.5/16 4.5/8 015821Q 0.3320 3.7/16 4.3/4 019317R 0.3390 3.7/16 4.3/4 01931811/32 0.3438 3.7/16 4.3/4 015822S 0.3480 3.1/2 4.7/8 019319T 0.3580 3.1/2 4.7/8 01932023/64 0.3594 3.1/2 4.7/8 015823U 0.3680 3.5/8 5“ 0193213/8 0.3750 3.5/8 5“ 015824V 0.3770 3.5/8 5“ 019322W 0.3860 3.3/4 5.1/8 01932325/64 0.3906 3.3/4 5.1/8 015825X 0.3970 3.3/4 5.1/8 019324Y 0.4040 3.7/8 5.1/4 01932513/32 0.4062 3.7/8 5.1/4 015826

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

Z 0.4130 3.7/8 5.1/4 01932627/64 0.4219 3.15/16 5.3/8 0158277/16 0.4375 4.1/16 5.1/2 01582829/64 0.4531 4.3/16 5.5/8 01582915/32 0.4688 4.5/16 5.3/4 01583031/64 0.4844 4.3/8 5.7/8 0158311/2 0.5000 4.1/2 6“ 01583233/64 0.5156 4.13/16 6.5/8 01583317/32 0.5312 4.13/16 6.5/8 01583435/64 0.5469 4.13/16 6.5/8 0158359/16 0.5625 4.13/16 6.5/8 01583637/64 0.5781 4.13/16 6.5/8 01583719/32 0.5938 5.3/16 7.1/8 01583839/64 0.6094 5.3/16 7.1/8 0158395/8 0.6250 5.3/16 7.1/8 01584041/64 0.6406 5.3/16 7.1/8 01584121/32 0.6562 5.3/16 7.1/8 01584243/64 0.6719 5.5/8 7.5/8 01584311/16 0.6875 5.5/8 7.5/8 015844


QC21GM

■

●

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

1.50 0.0591 18 40 0198152.00 0.0787 24 49 0198202.50 0.0984 30 57 0198253.00 0.1181 33 61 0198303.50 0.1378 39 70 0198354.00 0.1575 43 75 0198404.50 0.1772 47 80 0198455.00 0.1969 52 86 0198505.20 0.2047 52 86 0198525.50 0.2165 57 93 0198555.60 0.2205 57 93 0198566.00 0.2362 57 93 0198606.50 0.2559 63 101 0198656.80 0.2677 69 109 0198687.00 0.2756 69 109 0198707.50 0.2953 69 109 019875

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

8.00 0.3150 75 117 0198808.20 0.3228 75 117 0198828.50 0.3346 75 117 0198858.60 0.3386 81 125 0198869.00 0.3543 81 125 0198909.50 0.3740 81 125 01989510.00 0.3937 87 133 01990010.50 0.4134 87 133 01990511.00 0.4331 94 142 01991011.50 0.4528 94 142 01991512.00 0.4724 101 151 01992012.50 0.4921 101 151 01992513.00 0.5118 101 151 019930


d1Ømm

d1dec.Inch

l2mm

1lmm

EDP #ore-Code

1.50 0.0591 18 40 0131152.00 0.0787 24 49 0131202.50 0.0984 30 57 0131253.00 0.1181 33 61 0131303.50 0.1378 39 70 0131354.00 0.1575 43 75 0131404.50 0.1772 47 80 0131455.00 0.1969 52 86 0131505.20 0.2047 52 86 0131525.50 0.2165 57 93 0131555.60 0.2205 57 93 0131566.00 0.2362 57 93 0131606.50 0.2559 63 101 0131656.80 0.2677 69 109 0131687.00 0.2756 69 109 0131707.50 0.2953 69 109 0131758.00 0.3150 75 117 0131808.20 0.3228 75 117 0131828.50 0.3346 75 117 0131858.60 0.3386 81 125 013186

d1Ømm

d1dec.Inch

l2mm

1lmm

EDP #ore-Code

9.00 0.3543 81 125 0131909.50 0.3740 81 125 01319510.00 0.3937 87 133 01490010.50 0.4134 87 133 01490511.00 0.4331 94 142 01491011.50 0.4528 94 142 01491512.00 0.4724 101 151 01492012.50 0.4921 101 151 01492513.00 0.5118 101 151 01493013.50 0.5315 108 160 01493514.00 0.5512 108 160 01494014.50 0.5709 114 169 01494515.00 0.5906 114 169 01495015.50 0.6102 120 178 01495516.00 0.6299 120 178 01496016.50 0.6496 125 184 01496517.00 0.6693 125 184 01497017.50 0.6890 130 191 014975

QC21PM

■ ●


QC21M - QC21PM

QC21M

■ ●

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

1.50 0.0591 18 40 0121152.00 0.0787 24 49 0121202.50 0.0984 30 57 0121253.00 0.1181 33 61 0121303.50 0.1378 39 70 0121354.00 0.1575 43 75 0121404.50 0.1772 47 80 0121455.00 0.1969 52 86 0121505.20 0.2047 52 86 0121525.50 0.2165 57 93 0121555.60 0.2205 57 93 0121566.00 0.2362 57 93 0121606.50 0.2559 63 101 0121656.80 0.2677 69 109 012168

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

7.00 0.2756 69 109 0121707.50 0.2953 69 109 0121758.00 0.3150 75 117 0121808.20 0.3228 75 117 0121828.50 0.3346 75 117 0121858.60 0.3386 81 125 0121869.00 0.3543 81 125 0121909.50 0.3740 81 125 01219510.00 0.3937 87 133 01290010.50 0.4134 87 133 01290511.00 0.4331 94 142 01291011.50 0.4528 94 142 01291512.00 0.4724 101 151 01292012.50 0.4921 101 151 01292513.00 0.5118 101 151 012930


R10CO

R10CO

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/64 0.0156 3/16 3/4 0103011/32 0.0312 1/2 1.3/8 0103023/64 0.0469 3/4 1.3/4 0103031/16 0.0625 7/8 1.7/8 0103045/64 0.0781 1“ 2“ 0103053/32 0.0938 1.1/4 2.1/4 0103067/64 0.1094 1.1/2 2.5/8 0103071/8 0.1250 1.5/8 2.3/4 0103089/64 0.1406 1.3/4 2.7/8 0103095/32 0.1562 2“ 3.1/8 01031011/64 0.1719 2.1/8 3.1/4 0103113/16 0.1875 2.5/16 3.1/2 01031213/64 0.2031 2.7/16 3.5/8 0103137/32 0.2188 2.1/2 3.3/4 01031415/64 0.2344 2.5/8 3.7/8 0103151/4 0.2500 2.3/4 4“ 01031617/64 0.2656 2.7/8 4.1/8 0103179/32 0.2812 2.15/16 4.1/4 01031819/64 0.2969 3.1/16 4.3/8 0103195/16 0.3125 3.3/16 4.1/2 01032021/64 0.3281 3.5/16 4.5/8 01032111/32 0.3438 3.7/16 4.3/4 010322

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

23/64 0.3594 3.1/2 4.7/8 0103233/8 0.3750 3.5/8 5“ 01032425/64 0.3906 3.3/4 5.1/8 01032513/32 0.4062 3.7/8 5.1/4 01032627/64 0.4219 3.15/16 5.3/8 0103277/16 0.4375 4.1/16 5.1/2 01032829/64 0.4531 4.3/16 5.5/8 01032915/32 0.4688 4.5/16 5.3/4 01033031/64 0.4844 4.3/8 5.7/8 0103311/2 0.5000 4.1/2 6“ 01033233/64 0.5156 4.13/16 6.5/8 01033317/32 0.5312 4.13/16 6.5/8 01033435/64 0.5469 4.13/16 6.5/8 0103359/16 0.5625 4.13/16 6.5/8 01033637/64 0.5781 4.13/16 6.5/8 01033719/32 0.5938 5.3/16 7.1/8 01033839/64 0.6094 5.3/16 7.1/8 0103395/8 0.6250 5.3/16 7.1/8 01034041/64 0.6406 5.3/16 7.1/8 01034121/32 0.6562 5.3/16 7.1/8 01034243/64 0.6719 5.5/8 7.5/8 01034311/16 0.6875 5.5/8 7.5/8 010344

● Foret court● Jobber Drill ● Broca , serie corta● Type J● Heavy-Duty


1)

1)


● Heavy-Duty

● Foret court

R18CO

R18CO

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

80 0.0135 1/8 3/4 01838079 0.0145 1/8 3/4 01837978 0.0160 3/16 7/8 01837877 0.0180 3/16 7/8 01837776 0.0200 3/16 7/8 01837675 0.0210 1/4 1“ 01837574 0.0225 1/4 1“ 01837473 0.0240 5/16 1.1/8 01837372 0.0250 5/16 1.1/8 01837271 0.0260 3/8 1.1/4 01837170 0.0280 3/8 1.1/4 01837069 0.0292 1/2 1.3/8 01836968 0.0310 1/2 1.3/8 01836867 0.0320 1/2 1.3/8 01836766 0.0330 1/2 1.3/8 01836665 0.0350 5/8 1.1/2 01836564 0.0360 5/8 1.1/2 01836463 0.0370 5/8 1.1/2 01836362 0.0380 5/8 1.1/2 01836261 0.0390 11/16 1.5/8 01836160 0.0400 11/16 1.5/8 01836059 0.0410 11/16 1.5/8 01835958 0.0420 11/16 1.5/8 01835857 0.0430 3/4 1.3/4 01835756 0.0465 3/4 1.3/4 01835655 0.0520 7/8 1.7/8 01835554 0.0550 7/8 1.7/8 01835453 0.0595 7/8 1.7/8 01835352 0.0635 7/8 1.7/8 01835251 0.0670 1“ 2“ 01835150 0.0700 1“ 2“ 01835049 0.0730 1“ 2“ 01834948 0.0760 1“ 2“ 01834847 0.0785 1“ 2“ 01834746 0.0810 1.1/8 2.1/8 01834645 0.0820 1.1/8 2.1/8 01834544 0.0860 1.1/8 2.1/8 01834443 0.0890 1.1/4 2.1/4 01834342 0.0935 1.1/4 2.1/4 01834241 0.0960 1.3/8 2.3/8 018341

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

40 0.0980 1.3/8 2.3/8 01834039 0.0995 1.3/8 2.3/8 01833938 0.1015 1.7/16 2.1/2 01833837 0.1040 1.7/16 2.1/2 01833736 0.1065 1.7/16 2.1/2 01833635 0.1100 1.1/2 2.5/8 01833534 0.1110 1.1/2 2.5/8 01833433 0.1130 1.1/2 2.5/8 01833332 0.1160 1.5/8 2.3/4 01833231 0.1200 1.5/8 2.3/4 01833130 0.1285 1.5/8 2.3/4 01833029 0.1360 1.3/4 2.7/8 01832928 0.1405 1.3/4 2.7/8 01832827 0.1440 1.7/8 3“ 01832726 0.1470 1.7/8 3“ 01832625 0.1495 1.7/8 3“ 01832524 0.1520 2“ 3.1/8 01832423 0.1540 2“ 3.1/8 01832322 0.1570 2“ 3.1/8 01832221 0.1590 2.1/8 3.1/4 01832120 0.1610 2.1/8 3.1/4 01832019 0.1660 2.1/8 3.1/4 01831918 0.1695 2.1/8 3.1/4 01831817 0.1730 2.3/16 3.3/8 01831716 0.1770 2.3/16 3.3/8 01831615 0.1800 2.3/16 3.3/8 01831514 0.1820 2.3/16 3.3/8 01831413 0.1850 2.5/16 3.1/2 01831312 0.1890 2.5/16 3.1/2 01831211 0.1910 2.5/16 3.1/2 01831110 0.1935 2.7/16 3.5/8 0183109 0.1960 2.7/16 3.5/8 0183098 0.1990 2.7/16 3.5/8 0183087 0.2010 2.7/16 3.5/8 0183076 0.2040 2.1/2 3.3/4 0183065 0.2055 2.1/2 3.3/4 0183054 0.2090 2.1/2 3.3/4 0183043 0.2130 2.1/2 3.3/4 0183032 0.2210 2.5/8 3.7/8 0183021 0.2280 2.5/8 3.7/8 018301

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)



● Type J


R15CO

R15CO

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 2.5/8 3.7/8 015301B 0.2380 2.3/4 4“ 015302C 0.2420 2.3/4 4“ 015303D 0.2460 2.3/4 4“ 015304E 0.2500 2.3/4 4“ 015305F 0.2570 2.7/8 4.1/8 015306G 0.2610 2.7/8 4.1/8 015307H 0.2660 2.7/8 4.1/8 015308I 0.2720 2.7/8 4.1/8 015309J 0.2770 2.7/8 4.1/8 015310K 0.2810 2.15/16 4.1/4 015311L 0.2900 2.15/16 4.1/4 015312M 0.2950 3.1/16 4.3/8 015313N 0.3020 3.1/16 4.3/8 015314

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 3.3/16 4.1/2 015315P 0.3230 3.5/16 4.5/8 015316Q 0.3320 3.7/16 4.3/4 015317R 0.3390 3.7/16 4.3/4 015318S 0.3480 3.1/2 4.7/8 015319T 0.3580 3.1/2 4.7/8 015320U 0.3680 3.5/8 5“ 015321V 0.3770 3.5/8 5“ 015322W 0.3860 3.3/4 5.1/8 015323X 0.3970 3.3/4 5.1/8 015324Y 0.4040 3.7/8 5.1/4 015325Z 0.4130 3.7/8 5.1/4 015326

● Jobber Drill ● Foret court ● Broca , serie corta● Type J● Heavy-Duty


2ACO● Foret court● Jobber Drill ● Broca , serie corta

2ACO

■●

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

1.00 0.0394 12 34 0164101.05 0.0413 12 34 0163551.10 0.0433 14 36 0164111.15 0.0453 14 36 0163561.20 0.0472 16 38 0164121.25 0.0492 16 38 0163571.30 0.0512 16 38 0164131.35 0.0531 18 40 0163581.40 0.0551 18 40 0164141.45 0.0571 18 40 0163591.50 0.0591 18 40 0164151.55 0.0610 20 43 0163601.60 0.0630 20 43 0164161.65 0.0650 20 43 0163611.70 0.0669 20 43 0164171.75 0.0689 22 46 0163621.80 0.0709 22 46 0164181.85 0.0728 22 46 0163631.90 0.0748 22 46 0164191.95 0.0768 24 49 0163642.00 0.0787 24 49 0164202.05 0.0807 24 49 0163652.10 0.0827 24 49 0164212.20 0.0866 27 53 0164222.30 0.0906 27 53 0164232.35 0.0925 27 53 0163682.40 0.0945 30 57 0164242.50 0.0984 30 57 0164252.60 0.1024 30 57 0164262.70 0.1063 33 61 0164272.80 0.1102 33 61 0164282.90 0.1142 33 61 0164293.00 0.1181 33 61 0164303.10 0.1220 36 65 016431

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

3.20 0.1260 36 65 0164323.25 0.1280 36 65 0163713.30 0.1299 36 65 0164333.40 0.1339 39 70 0164343.50 0.1378 39 70 0164353.60 0.1417 39 70 0164363.70 0.1457 39 70 0164373.75 0.1476 39 70 0163723.80 0.1496 43 75 0164384.00 0.1575 43 75 0164404.10 0.1614 43 75 0164414.20 0.1654 43 75 0164424.25 0.1673 43 75 0163734.30 0.1693 47 80 0164434.40 0.1732 47 80 0164444.50 0.1772 47 80 0164454.70 0.1850 47 80 0164474.80 0.1890 52 86 0164485.00 0.1969 52 86 0164505.10 0.2008 52 86 0164515.20 0.2047 52 86 0164525.25 0.2067 52 86 0163755.30 0.2087 52 86 0164535.50 0.2165 57 93 0164555.60 0.2205 57 93 0164565.70 0.2244 57 93 0164575.90 0.2323 57 93 0164596.00 0.2362 57 93 0164606.10 0.2402 63 101 0164616.20 0.2441 63 101 0164626.30 0.2480 63 101 0164636.40 0.2520 63 101 0164646.50 0.2559 63 101 0164656.60 0.2598 63 101 016466

● Heavy-Duty● Type J


2ACO

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

6.70 0.2638 63 101 0164676.80 0.2677 69 109 0164686.90 0.2717 69 109 0164697.00 0.2756 69 109 0164707.10 0.2795 69 109 0164717.20 0.2835 69 109 0164727.25 0.2854 69 109 0163797.30 0.2874 69 109 0164737.50 0.2953 69 109 0164757.80 0.3071 75 117 0164787.90 0.3110 75 117 0164798.00 0.3150 75 117 0164808.20 0.3228 75 117 0164828.40 0.3307 75 117 0164848.50 0.3346 75 117 0164858.80 0.3465 81 125 0164888.90 0.3504 81 125 0164899.00 0.3543 81 125 0164909.10 0.3583 81 125 016491

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

9.20 0.3622 81 125 0164929.30 0.3661 81 125 0164939.40 0.3701 81 125 0164949.50 0.3740 81 125 0164959.60 0.3780 87 133 0164969.70 0.3819 87 133 0164979.80 0.3858 87 133 01649810.00 0.3937 87 133 01630010.20 0.4016 87 133 01630210.50 0.4134 87 133 01630510.80 0.4252 94 142 01630811.00 0.4331 94 142 01631011.20 0.4409 94 142 01631211.50 0.4528 94 142 01631511.80 0.4646 94 142 01631812.00 0.4724 101 151 01632012.20 0.4803 101 151 01632212.50 0.4921 101 151 01632513.00 0.5118 101 151 016330

● Foret court● Jobber Drill ● Broca , serie corta● Heavy-Duty


R88CO - R89CO

R88CO

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/16 1.7/8 0587045/64 0.0781 1/2 2“ 0587053/32 0.0938 5/8 2.1/4 0587067/64 0.1094 13/16 2.5/8 0587071/8 0.1250 7/8 2.3/4 0587089/64 0.1406 15/16 2.7/8 0587095/32 0.1562 1“ 3.1/8 05871011/64 0.1719 1.1/16 3.1/4 0587113/16 0.1875 1.1/8 3.1/2 05871213/64 0.2031 1.3/16 3.5/8 0587137/32 0.2188 1.1/4 3.3/4 05871415/64 0.2344 1.5/16 3.7/8 0587151/4 0.2500 1.3/8 4“ 05871617/64 0.2656 1.7/16 4.1/8 058717

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 1.1/2 4.1/4 05871819/64 0.2969 1.9/16 4.3/8 0587195/16 0.3125 1.5/8 4.1/2 05872021/64 0.3281 1.11/16 4.5/8 05872111/32 0.3438 1.11/16 4.3/4 05872223/64 0.3594 1.3/4 4.7/8 0587233/8 0.3750 1.13/16 5“ 05872425/64 0.3906 1.7/8 5.1/8 05872513/32 0.4062 1.15/16 5.1/4 05872627/64 0.4219 2“ 5.3/8 0587277/16 0.4375 2.1/16 5.1/2 05872829/64 0.4531 2.1/8 5.5/8 05872915/32 0.4688 2.1/8 5.3/4 05873031/64 0.4844 2.3/16 5.7/8 0587311/2 0.5000 2.1/4 6“ 058732

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

52 0.0635 7/16 1.7/8 05885251 0.0670 1/2 2“ 05885150 0.0700 1/2 2“ 05885049 0.0730 1/2 2“ 05884946 0.0810 9/16 2.1/8 05884645 0.0820 9/16 2.1/8 05884544 0.0860 9/16 2.1/8 05884443 0.0890 5/8 2.1/4 05884342 0.0935 5/8 2.1/4 05884241 0.0960 5/8 2.3/8 05884140 0.0980 13/16 2.3/8 05884039 0.0995 13/16 2.3/8 05883936 0.1065 13/16 2.1/2 05883631 0.1200 7/8 2.3/4 05883130 0.1285 15/16 2.3/4 05883029 0.1360 15/16 2.7/8 05882927 0.1440 1“ 3“ 05882726 0.1470 1“ 3“ 058826

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

25 0.1495 1“ 3“ 05882524 0.1520 1“ 3.1/8 05882422 0.1570 1.1/16 3.1/8 05882221 0.1590 1.1/16 3.1/4 05882120 0.1610 1.1/16 3.1/4 05882016 0.1770 1.1/8 3.3/8 05881613 0.1850 1.1/8 3.1/2 05881312 0.1890 1.1/8 3.1/2 05881211 0.1910 1.3/16 3.1/2 05881110 0.1935 1.3/16 3.5/8 0588109 0.1960 1.3/16 3.5/8 0588098 0.1990 1.3/16 3.5/8 0588087 0.2010 1.3/16 3.5/8 0588076 0.2040 1.1/4 3.3/4 0588065 0.2055 1.1/4 3.3/4 0588053 0.2130 1.1/4 3.3/4 058803

R89CO

● Jobber Drill ● Foret court ● Broca , serie corta● Type D● Heavy-Duty


EZ10P - EZ18P

EZ10P

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 0146045/64 0.0781 1“ 2“ 0146053/32 0.0938 1.1/4 2.1/4 0146067/64 0.1094 1.1/2 2.5/8 0146071/8 0.1250 1.5/8 2.3/4 0146089/64 0.1406 1.3/4 2.7/8 0146095/32 0.1562 2“ 3.1/8 01461011/64 0.1719 2.1/8 3.1/4 0146113/16 0.1875 2.5/16 3.1/2 01461213/64 0.2031 2.7/16 3.5/8 0146137/32 0.2188 2.1/2 3.3/4 01461415/64 0.2344 2.5/8 3.7/8 0146151/4 0.2500 2.3/4 4“ 01461617/64 0.2656 2.7/8 4.1/8 0146179/32 0.2812 2.15/16 4.1/4 01461819/64 0.2969 3.1/16 4.3/8 014619

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 3.3/16 4.1/2 01462021/64 0.3281 3.5/16 4.5/8 01462111/32 0.3438 3.7/16 4.3/4 01462223/64 0.3594 3.1/2 4.7/8 0146233/8 0.3750 3.5/8 5“ 01462425/64 0.3906 3.3/4 5.1/8 01462513/32 0.4062 3.7/8 5.1/4 01462627/64 0.4219 3.15/16 5.3/8 0146277/16 0.4375 4.1/16 5.1/2 01462829/64 0.4531 4.3/16 5.5/8 01462915/32 0.4688 4.5/16 5.3/4 01463031/64 0.4844 4.3/8 5.7/8 0146311/2 0.5000 4.1/2 6“ 014632

EZ18P d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

52 0.0635 7/8 1.7/8 01475251 0.0670 1“ 2“ 01475150 0.0700 1“ 2“ 01475049 0.0730 1“ 2“ 01474948 0.0760 1“ 2“ 01474847 0.0785 1“ 2“ 01474746 0.0810 1.1/8 2.1/8 01474639 0.0995 1.3/8 2.3/8 01473936 0.1065 1.7/16 2.1/2 01473634 0.1110 1.1/2 2.5/8 01473433 0.1130 1.1/2 2.5/8 01473332 0.1160 1.5/8 2.3/4 01473231 0.1200 1.5/8 2.3/4 01473130 0.1285 1.5/8 2.3/4 01473029 0.1360 1.3/4 2.7/8 01472926 0.1470 1.7/8 3“ 01472625 0.1495 1.7/8 3“ 01472524 0.1520 2“ 3.1/8 014724

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

23 0.1540 2“ 3.1/8 01472321 0.1590 2.1/8 3.1/4 01472119 0.1660 2.1/8 3.1/4 01471918 0.1695 2.1/8 3.1/4 01471817 0.1730 2.3/16 3.3/8 01471716 0.1770 2.3/16 3.3/8 01471615 0.1800 2.3/16 3.3/8 01471514 0.1820 2.3/16 3.3/8 01471412 0.1890 2.5/16 3.1/2 01471210 0.1935 2.7/16 3.5/8 0147109 0.1960 2.7/16 3.5/8 0147097 0.2010 2.7/16 3.5/8 0147075 0.2055 2.1/2 3.3/4 0147053 0.2130 2.1/2 3.3/4 0147032 0.2210 2.5/8 3.7/8 0147021 0.2280 2.5/8 3.7/8 014701

● Foret court● Jobber Drill ● Broca , serie corta● Parabolic flute


HX10 - HX15

HX10

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 0220045/64 0.0781 1“ 2“ 0220053/32 0.0938 1.1/4 2.1/4 0220067/64 0.1094 1.1/2 2.5/8 0220071/8 0.1250 1.5/8 2.3/4 0220089/64 0.1406 1.3/4 2.7/8 0220095/32 0.1563 2“ 3.1/8 02201011/64 0.1719 2.1/8 3.1/4 0220113/16 0.1875 2.5/16 3.1/2 02201213/64 0.2031 2.7/16 3.5/8 0220137/32 0.2188 2.1/2 3.3/4 02201415/64 0.2344 2.5/8 3.7/8 0220151/4 0.2500 2.3/4 4“ 02201617/64 0.2656 2.7/8 4.1/8 0220179/32 0.2813 2.15/16 4.1/4 02201819/64 0.2969 3.1/16 4.3/8 022019

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 3.3/16 4.1/2 02202021/64 0.3281 3.5/16 4.5/8 02202111/32 0.3438 3.7/16 4.3/4 02202223/64 0.3594 3.1/2 4.7/8 0220233/8 0.3750 3.5/8 5“ 02202425/64 0.3906 3.3/4 5.1/8 02202513/32 0.4063 3.7/8 5.1/4 02202627/64 0.4219 3.15/16 5.3/8 0220277/16 0.4375 4.1/16 5.1/2 02202829/64 0.4531 4.3/16 5.5/8 02202915/32 0.4688 4.5/16 5.3/4 02203031/64 0.4844 4.3/8 5.7/8 0220311/2 0.5000 4.1/2 6“ 022032

HX15 d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 2.5/8 3.7/8 022201B 0.2380 2.3/4 4“ 022202C 0.2420 2.3/4 4“ 022203D 0.2460 2.3/4 4“ 022204E 0.2500 2.3/4 4“ 022205F 0.2570 2.7/8 4.1/8 022206G 0.2610 2.7/8 4.1/8 022207H 0.2660 2.7/8 4.1/8 022208I 0.2720 2.7/8 4.1/8 022209J 0.2770 2.7/8 4.1/8 022210K 0.2810 2.15/16 4.1/4 022211L 0.2900 2.15/16 4.1/4 022212M 0.2950 3.1/16 4.3/8 022213N 0.3020 3.1/16 4.3/8 022214

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 3.3/16 4.1/2 022215P 0.3230 3.5/16 4.5/8 022216Q 0.3320 3.7/16 4.3/4 022217R 0.3390 3.7/16 4.3/4 022218S 0.3480 3.1/2 4.7/8 022219T 0.3580 3.1/2 4.7/8 022220U 0.3680 3.5/8 5“ 022221V 0.3770 3.5/8 5“ 022222W 0.3860 3.3/4 5.1/8 022223X 0.3970 3.3/4 5.1/8 022224Y 0.4040 3.7/8 5.1/4 022225Z 0.4130 3.7/8 5.1/4 022226

● Jobber Drill ● Foret court ● Broca , serie corta


HX18

HX18

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

52 0.0635 7/8 1.7/8 02215251 0.0670 1“ 2“ 02215150 0.0700 1“ 2“ 02215049 0.0730 1“ 2“ 02214948 0.0760 1“ 2“ 02214847 0.0785 1“ 2“ 02214746 0.0810 1.1/8 2.1/8 02214645 0.0820 1.1/8 2.1/8 02214544 0.0860 1.1/8 2.1/8 02214443 0.0890 1.1/4 2.1/4 02214342 0.0935 1.1/4 2.1/4 02214241 0.0960 1.3/8 2.3/8 02214140 0.0980 1.3/8 2.3/8 02214039 0.0995 1.3/8 2.3/8 02213938 0.1015 1.7/16 2.1/2 02213837 0.1040 1.7/16 2.1/2 02213736 0.1065 1.7/16 2.1/2 02213635 0.1100 1.1/2 2.5/8 02213534 0.1110 1.1/2 2.5/8 02213433 0.1130 1.1/2 2.5/8 02213332 0.1160 1.5/8 2.3/4 02213231 0.1200 1.5/8 2.3/4 02213130 0.1285 1.5/8 2.3/4 02213029 0.1360 1.3/4 2.7/8 02212928 0.1405 1.3/4 2.7/8 02212827 0.1440 1.7/8 3“ 022127

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

26 0.1470 1.7/8 3“ 02212625 0.1495 1.7/8 3“ 02212524 0.1520 2“ 3.1/8 02212423 0.1540 2“ 3.1/8 02212322 0.1570 2“ 3.1/8 02212221 0.1590 2.1/8 3.1/4 02212120 0.1610 2.1/8 3.1/4 02212019 0.1660 2.1/8 3.1/4 02211918 0.1695 2.1/8 3.1/4 02211817 0.1730 2.3/16 3.3/8 02211716 0.1770 2.3/16 3.3/8 02211615 0.1800 2.3/16 3.3/8 02211514 0.1820 2.3/16 3.3/8 02211413 0.1850 2.5/16 3.1/2 02211312 0.1890 2.5/16 3.1/2 02211211 0.1910 2.5/16 3.1/2 02211110 0.1935 2.7/16 3.5/8 0221109 0.1960 2.7/16 3.5/8 0221098 0.1990 2.7/16 3.5/8 0221087 0.2010 2.7/16 3.5/8 0221076 0.2040 2.1/2 3.3/4 0221065 0.2055 2.1/2 3.3/4 0221054 0.2090 2.1/2 3.3/4 0221043 0.2130 2.1/2 3.3/4 0221032 0.2210 2.5/8 3.7/8 0221021 0.2280 2.5/8 3.7/8 022101



● Foret court

R10B

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 0102045/64 0.0781 1“ 2“ 0102053/32 0.0938 1.1/4 2.1/4 0102067/64 0.1094 1.1/2 2.5/8 0102071/8 0.1250 1.5/8 2.3/4 0102089/64 0.1406 1.3/4 2.7/8 0102095/32 0.1562 2“ 3.1/8 01021011/64 0.1719 2.1/8 3.1/4 0102113/16 0.1875 2.5/16 3.1/2 01021213/64 0.2031 2.7/16 3.5/8 0102137/32 0.2188 2.1/2 3.3/4 01021415/64 0.2344 2.5/8 3.7/8 0102151/4 0.2500 2.3/4 4“ 01021617/64 0.2656 2.7/8 4.1/8 0102179/32 0.2812 2.15/16 4.1/4 01021819/64 0.2969 3.1/16 4.3/8 010219

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 3.3/16 4.1/2 01022021/64 0.3281 3.5/16 4.5/8 01022111/32 0.3438 3.7/16 4.3/4 01022223/64 0.3594 3.1/2 4.7/8 0102233/8 0.3750 3.5/8 5“ 01022425/64 0.3906 3.3/4 5.1/8 01022513/32 0.4062 3.7/8 5.1/4 01022627/64 0.4219 3.15/16 5.3/8 0102277/16 0.4375 4.1/16 5.1/2 01022829/64 0.4531 4.3/16 5.5/8 01022915/32 0.4688 4.5/16 5.3/4 01023031/64 0.4844 4.3/8 5.7/8 0102311/2 0.5000 4.1/2 6“ 010232


R10B● Type B


R18B - R15B

R18B

■

●

d1 Ø

d1 dec.Inch

l2Inch

l1Inch

EDP # or e-Code

52 0.0635 7/8 1.7/8 01825251 0.0670 1“ 2“ 01825150 0.0700 1“ 2“ 01825049 0.0730 1“ 2“ 01824948 0.0760 1“ 2“ 01824847 0.0785 1“ 2“ 01824746 0.0810 1.1/8 2.1/8 01824645 0.0820 1.1/8 2.1/8 01824544 0.0860 1.1/8 2.1/8 01824443 0.0890 1.1/4 2.1/4 01824342 0.0935 1.1/4 2.1/4 01824241 0.0960 1.3/8 2.3/8 01824140 0.0980 1.3/8 2.3/8 01824039 0.0995 1.3/8 2.3/8 01823938 0.1015 1.7/16 2.1/2 01823837 0.1040 1.7/16 2.1/2 01823736 0.1065 1.7/16 2.1/2 01823635 0.1100 1.1/2 2.5/8 01823534 0.1110 1.1/2 2.5/8 01823433 0.1130 1.1/2 2.5/8 01823332 0.1160 1.5/8 2.3/4 01823231 0.1200 1.5/8 2.3/4 01823130 0.1285 1.5/8 2.3/4 01823029 0.1360 1.3/4 2.7/8 01822928 0.1405 1.3/4 2.7/8 01822827 0.1440 1.7/8 3“ 018227

d1 Ø

d1 dec.Inch

l2Inch

l1Inch

EDP # or e-Code

26 0.1470 1.7/8 3“ 01822625 0.1495 1.7/8 3“ 01822524 0.1520 2“ 3.1/8 01822423 0.1540 2“ 3.1/8 01822322 0.1570 2“ 3.1/8 01822221 0.1590 2.1/8 3.1/4 01822120 0.1610 2.1/8 3.1/4 01822019 0.1660 2.1/8 3.1/4 01821918 0.1695 2.1/8 3.1/4 01821817 0.1730 2.3/16 3.3/8 01821716 0.1770 2.3/16 3.3/8 01821615 0.1800 2.3/16 3.3/8 01821514 0.1820 2.3/16 3.3/8 01821413 0.1850 2.5/16 3.1/2 01821312 0.1890 2.5/16 3.1/2 01821211 0.1910 2.5/16 3.1/2 01821110 0.1935 2.7/16 3.5/8 0182109 0.1960 2.7/16 3.5/8 0182098 0.1990 2.7/16 3.5/8 0182087 0.2010 2.7/16 3.5/8 0182076 0.2040 2.1/2 3.3/4 0182065 0.2055 2.1/2 3.3/4 0182054 0.2090 2.1/2 3.3/4 0182043 0.2130 2.1/2 3.3/4 0182032 0.2210 2.5/8 3.7/8 0182021 0.2280 2.5/8 3.7/8 018201

d1ØInch

d1decimalInch

l2inch

l1Inch

EDP #or e-Code

A 0.2340 2.5/8 3.7/8 015201B 0.2380 2.3/4 4“ 015202C 0.2420 2.3/4 4“ 015203D 0.2460 2.3/4 4“ 015204E 0.2500 2.3/4 4“ 015205F 0.2570 2.7/8 4.1/8 015206G 0.2610 2.7/8 4.1/8 015207H 0.2660 2.7/8 4.1/8 015208I 0.2720 2.7/8 4.1/8 015209J 0.2770 2.7/8 4.1/8 015210K 0.2810 2.15/16 4.1/4 015211L 0.2900 2.15/16 4.1/4 015212

d1ØInch

d1decimalInch

l2inch

l1Inch

EDP #or e-Code

M 0.2950 3.1/16 4.3/8 015213N 0.3020 3.1/16 4.3/8 015214O 0.3160 3.3/16 4.1/2 015215P 0.3230 3.5/16 4.5/8 015216Q 0.3320 3.7/16 4.3/4 015217R 0.3390 3.7/16 4.3/4 015218S 0.3480 3.1/2 4.7/8 015219T 0.3580 3.1/2 4.7/8 015220U 0.3680 3.5/8 5“ 015221V 0.3770 3.5/8 5“ 015222W 0.3860 3.3/4 5.1/8 015223X 0.3970 3.3/4 5.1/8 015224Y 0.4040 3.7/8 5.1/4 015225Z 0.4130 3.7/8 5.1/4 015226

R15B

● Foret court● Jobber Drill ● Broca , serie corta● Type B


R10A

R10A

■ ●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 0101045/64 0.0781 1“ 2“ 0101053/32 0.0938 1.1/4 2.1/4 0101067/64 0.1094 1.1/2 2.5/8 0101071/8 0.1250 1.5/8 2.3/4 0101089/64 0.1406 1.3/4 2.7/8 0101095/32 0.1562 2.0 3.1/8 01011011/64 0.1719 2.1/8 3.1/4 0101113/16 0.1875 2.5/16 3.1/2 01011213/64 0.2031 2.7/16 3.5/8 0101137/32 0.2188 2.1/2 3.3/4 01011415/64 0.2344 2.5/8 3.7/8 0101151/4 0.2500 2.3/4 4“ 01011617/64 0.2656 2.7/8 4.1/8 0101179/32 0.2812 2.15/16 4.1/4 01011819/64 0.2969 3.1/16 4.3/8 010119

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 3.3/16 4.1/2 01012021/64 0.3281 3.5/16 4.5/8 01012111/32 0.3438 3.7/16 4.3/4 01012223/64 0.3594 3.1/2 4.7/8 0101233/8 0.3750 3.5/8 5“ 01012425/64 0.3906 3.3/4 5.1/8 01012513/32 0.4062 3.7/8 5.1/4 01012627/64 0.4219 3.15/16 5.3/8 0101277/16 0.4375 4.1/16 5.1/2 01012829/64 0.4531 4.3/16 5.5/8 01012915/32 0.4688 4.5/16 5.3/4 01013031/64 0.4844 4.3/8 5.7/8 0101311/2 0.5000 4.1/2 6“ 010132

R18A d1 Ø

d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

52 0.0635 7/8 1.7/8 01815251 0.0670 1“ 2“ 01815150 0.0700 1“ 2“ 01815049 0.0730 1“ 2“ 01814948 0.0760 1“ 2“ 01814847 0.0785 1“ 2“ 01814746 0.0810 1.1/8 2.1/8 01814645 0.0820 1.1/8 2.1/8 01814544 0.0860 1.1/8 2.1/8 01814443 0.0890 1.1/4 2.1/4 01814342 0.0935 1.1/4 2.1/4 01814241 0.0960 1.3/8 2.3/8 01814140 0.0980 1.3/8 2.3/8 01814039 0.0995 1.3/8 2.3/8 01813938 0.1015 1.7/16 2.1/2 01813837 0.1040 1.7/16 2.1/2 01813736 0.1065 1.7/16 2.1/2 01813635 0.1100 1.1/2 2.5/8 01813534 0.1110 1.1/2 2.5/8 01813433 0.1130 1.1/2 2.5/8 01813332 0.1160 1.5/8 2.3/4 01813231 0.1200 1.5/8 2.3/4 01813130 0.1285 1.5/8 2.3/4 01813029 0.1360 1.3/4 2.7/8 01812928 0.1405 1.3/4 2.7/8 01812827 0.1440 1.7/8 3“ 018127

d1 Ø

d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

26 0.1470 1.7/8 3“ 01812625 0.1495 1.7/8 3“ 01812524 0.1520 2“ 3.1/8 01812423 0.1540 2“ 3.1/8 01812322 0.1570 2“ 3.1/8 01812221 0.1590 2.1/8 3.1/4 01812120 0.1610 2.1/8 3.1/4 01812019 0.1660 2.1/8 3.1/4 01811918 0.1695 2.1/8 3.1/4 01811817 0.1730 2.3/16 3.3/8 01811716 0.1770 2.3/16 3.3/8 01811615 0.1800 2.3/16 3.3/8 01811514 0.1820 2.3/16 3.3/8 01811413 0.1850 2.5/16 3.1/2 01811312 0.1890 2.5/16 3.1/2 01811211 0.1910 2.5/16 3.1/2 01811110 0.1935 2.7/16 3.5/8 0181109 0.1960 2.7/16 3.5/8 0181098 0.1990 2.7/16 3.5/8 0181087 0.2010 2.7/16 3.5/8 0181076 0.2040 2.1/2 3.3/4 0181065 0.2055 2.1/2 3.3/4 0181054 0.2090 2.1/2 3.3/4 0181043 0.2130 2.1/2 3.3/4 0181032 0.2210 2.5/8 3.7/8 0181021 0.2280 2.5/8 3.7/8 018101

● Foret court● Jobber Drill ● Broca , serie corta● Type A


● Foret court

R15A

R15A

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 2.5/8 3.7/8 015101B 0.2380 2.3/4 4“ 015102C 0.2420 2.3/4 4“ 015103D 0.2460 2.3/4 4“ 015104E 0.2500 2.3/4 4“ 015105F 0.2570 2.7/8 4.1/8 015106G 0.2610 2.7/8 4.1/8 015107H 0.2660 2.7/8 4.1/8 015108I 0.2720 2.7/8 4.1/8 015109J 0.2770 2.7/8 4.1/8 015110K 0.2810 2.15/16 4.1/4 015111L 0.2900 2.15/16 4.1/4 015112M 0.2950 3.1/16 4.3/8 015113N 0.3020 3.1/16 4.3/8 015114

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 3.3/16 4.1/2 015115P 0.3230 3.5/16 4.5/8 015116Q 0.3320 3.7/16 4.3/4 015117R 0.3390 3.7/16 4.3/4 015118S 0.3480 3.1/2 4.7/8 015119T 0.3580 3.1/2 4.7/8 015120U 0.3680 3.5/8 5“ 015121V 0.3770 3.5/8 5“ 015122W 0.3860 3.3/4 5.1/8 015123X 0.3970 3.3/4 5.1/8 015124Y 0.4040 3.7/8 5.1/4 015125Z 0.4130 3.7/8 5.1/4 015126

● Jobber Drill ● Broca , serie corta● Type A


● Foret court

R10

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/64 0.0156 3/16 3/4 0100011/32 0.0312 1/2 1.3/8 0100023/64 0.0469 3/4 1.3/4 0100031/16 0.0625 7/8 1.7/8 0100045/64 0.0781 1“ 2“ 0100053/32 0.0938 1.1/4 2.1/4 0100067/64 0.1094 1.1/2 2.5/8 0100071/8 0.1250 1.5/8 2.3/4 0100089/64 0.1406 1.3/4 2.7/8 0100095/32 0.1562 2“ 3.1/8 01001011/64 0.1719 2.1/8 3.1/4 0100113/16 0.1875 2.5/16 3.1/2 01001213/64 0.2031 2.7/16 3.5/8 0100137/32 0.2188 2.1/2 3.3/4 01001415/64 0.2344 2.5/8 3.7/8 0100151/4 0.2500 2.3/4 4“ 01001617/64 0.2656 2.7/8 4.1/8 0100179/32 0.2812 2.15/16 4.1/4 01001819/64 0.2969 3.1/16 4.3/8 0100195/16 0.3125 3.3/16 4.1/2 01002021/64 0.3281 3.5/16 4.5/8 01002111/32 0.3438 3.7/16 4.3/4 010022

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

23/64 0.3594 3.1/2 4.7/8 0100233/8 0.3750 3.5/8 5“ 01002425/64 0.3906 3.3/4 5.1/8 01002513/32 0.4062 3.7/8 5.1/4 01002627/64 0.4219 3.15/16 5.3/8 0100277/16 0.4375 4.1/16 5.1/2 01002829/64 0.4531 4.3/16 5.5/8 01002915/32 0.4688 4.5/16 5.3/4 01003031/64 0.4844 4.3/8 5.7/8 0100311/2 0.5000 4.1/2 6“ 01003233/64 0.5156 4.13/16 6.5/8 01003317/32 0.5312 4.13/16 6.5/8 01003435/64 0.5469 4.13/16 6.5/8 0100359/16 0.5625 4.13/16 6.5/8 01003637/64 0.5781 4.13/16 6.5/8 01003719/32 0.5938 5.3/16 7.1/8 01003839/64 0.6094 5.3/16 7.1/8 0100395/8 0.6250 5.3/16 7.1/8 01004041/64 0.6406 5.3/16 7.1/8 01004121/32 0.6562 5.3/16 7.1/8 01004243/64 0.6719 5.5/8 7.5/8 01004311/16 0.6875 5.5/8 7.5/8 010044

● Jobber Drill ● Broca, serie corta

R10


12 0.1890 2.5/16 3.1/2 01801211 0.1910 2.5/16 3.1/2 01801110 0.1935 2.7/16 3.5/8 0180109 0.1960 2.7/16 3.5/8 0180098 0.1990 2.7/16 3.5/8 0180087 0.2010 2.7/16 3.5/8 0180076 0.2040 2.1/2 3.3/4 0180065 0.2055 2.1/2 3.3/4 0180054 0.2090 2.1/2 3.3/4 0180043 0.2130 2.1/2 3.3/4 0180032 0.2210 2.5/8 3.7/8 0180021 0.2280 2.5/8 3.7/8 018001

R18

R18

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

80 0.0135 1/8 3/4 01808079 0.0145 1/8 3/4 01807978 0.0160 3/16 7/8 01807877 0.0180 3/16 7/8 01807776 0.0200 3/16 7/8 01807675 0.0210 1/4 1“ 01807574 0.0225 1/4 1“ 01807473 0.0240 5/16 1.1/8 01807372 0.0250 5/16 1.1/8 01807271 0.0260 3/8 1.1/4 01807170 0.0280 3/8 1.1/4 01807069 0.0292 1/2 1.3/8 01806968 0.0310 1/2 1.3/8 01806867 0.0320 1/2 1.3/8 01806766 0.0330 1/2 1.3/8 01806665 0.0350 5/8 1.1/2 01806564 0.0360 5/8 1.1/2 01806463 0.0370 5/8 1.1/2 01806362 0.0380 5/8 1.1/2 01806261 0.0390 11/16 1.5/8 01806160 0.0400 11/16 1.5/8 01806059 0.0410 11/16 1.5/8 01805958 0.0420 11/16 1.5/8 01805857 0.0430 3/4 1.3/4 01805756 0.0465 3/4 1.3/4 01805655 0.0520 7/8 1.7/8 01805554 0.0550 7/8 1.7/8 01805453 0.0595 7/8 1.7/8 01805352 0.0635 7/8 1.7/8 01805251 0.0670 1“ 2“ 01805150 0.0700 1“ 2“ 01805049 0.0730 1“ 2“ 01804948 0.0760 1“ 2“ 01804847 0.0785 1“ 2“ 01804746 0.0810 1.1/8 2.1/8 01804645 0.0820 1.1/8 2.1/8 01804544 0.0860 1.1/8 2.1/8 01804443 0.0890 1.1/4 2.1/4 01804342 0.0935 1.1/4 2.1/4 01804241 0.0960 1.3/8 2.3/8 018041

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

40 0.0980 1.3/8 2.3/8 01804039 0.0995 1.3/8 2.3/8 01803938 0.1015 1.7/16 2.1/2 01803837 0.1040 1.7/16 2.1/2 01803736 0.1065 1.7/16 2.1/2 01803635 0.1100 1.1/2 2.5/8 01803534 0.1110 1.1/2 2.5/8 01803433 0.1130 1.1/2 2.5/8 01803332 0.1160 1.5/8 2.3/4 01803231 0.1200 1.5/8 2.3/4 01803130 0.1285 1.5/8 2.3/4 01803029 0.1360 1.3/4 2.7/8 01802928 0.1405 1.3/4 2.7/8 01802827 0.1440 1.7/8 3“ 01802726 0.1470 1.7/8 3“ 01802625 0.1495 1.7/8 3“ 01802524 0.1520 2“ 3.1/8 01802423 0.1540 2“ 3.1/8 01802322 0.1570 2“ 3.1/8 01802221 0.1590 2.1/8 3.1/4 01802120 0.1610 2.1/8 3.1/4 01802019 0.1660 2.1/8 3.1/4 01801918 0.1695 2.1/8 3.1/4 01801817 0.1730 2.3/16 3.3/8 01801716 0.1770 2.3/16 3.3/8 01801615 0.1800 2.3/16 3.3/8 01801514 0.1820 2.3/16 3.3/8 01801413 0.1850 2.5/16 3.1/2 018013


■

●


R15

R15

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 2.5/8 3.7/8 015001B 0.2380 2.3/4 4“ 015002C 0.2420 2.3/4 4“ 015003D 0.2460 2.3/4 4“ 015004E 0.2500 2.3/4 4“ 015005F 0.2570 2.7/8 4.1/8 015006G 0.2610 2.7/8 4.1/8 015007H 0.2660 2.7/8 4.1/8 015008I 0.2720 2.7/8 4.1/8 015009J 0.2770 2.7/8 4.1/8 015010K 0.2810 2.15/16 4.1/4 015011L 0.2900 2.15/16 4.1/4 015012M 0.2950 3.1/16 4.3/8 015013N 0.3020 3.1/16 4.3/8 015014

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 3.3/16 4.1/2 015015P 0.3230 3.5/16 4.5/8 015016Q 0.3320 3.7/16 4.3/4 015017R 0.3390 3.7/16 4.3/4 015018S 0.3480 3.1/2 4.7/8 015019T 0.3580 3.1/2 4.7/8 015020U 0.3680 3.5/8 5“ 015021V 0.3770 3.5/8 5“ 015022W 0.3860 3.3/4 5.1/8 015023X 0.3970 3.3/4 5.1/8 015024Y 0.4040 3.7/8 5.1/4 015025Z 0.4130 3.7/8 5.1/4 015026



2AB

2AB

■●

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

1.00 0.0394 12.0 34 0290101.10 0.0433 14.0 36 0290111.15 0.0453 14.0 36 0292561.20 0.0472 16.0 38 0290121.25 0.0492 16.0 38 0292571.30 0.0512 16.0 38 0290131.35 0.0531 18.0 40 0292581.40 0.0551 18.0 40 0290141.45 0.0571 18.0 40 0292591.50 0.0591 18.0 40 0290151.55 0.0610 20.0 43 0292601.60 0.0630 20.0 43 0290161.70 0.0669 20.0 43 0290171.75 0.0689 22.0 46 0292621.80 0.0709 22.0 46 0290181.90 0.0748 22.0 46 0290191.95 0.0768 24.0 49 0292642.00 0.0787 24.0 49 0290202.10 0.0827 24.0 49 0290212.20 0.0866 27.0 53 0290222.30 0.0906 27.0 53 0290232.35 0.0925 27.0 53 0292682.40 0.0945 30.0 57 0290242.50 0.0984 30.0 57 0290252.60 0.1024 30.0 57 0290262.70 0.1063 33.0 61 0290272.90 0.1142 33.0 61 0290293.00 0.1181 33.0 61 0290303.10 0.1220 36.0 65 0290313.20 0.1260 36.0 65 0290323.25 0.1280 36.0 65 0292713.30 0.1299 36.0 65 0290333.40 0.1339 39.0 70 0290343.50 0.1378 39.0 70 0290353.60 0.1417 39.0 70 0290363.70 0.1457 39.0 70 0290374.00 0.1575 43.0 75 0290404.10 0.1614 43.0 75 0290414.20 0.1654 43.0 75 0290424.30 0.1693 47.0 80 029043

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

4.40 0.1732 47.0 80 0290444.50 0.1772 47.0 80 0290454.60 0.1811 47.0 80 0290464.80 0.1890 52.0 86 0290485.00 0.1969 52.0 86 0290505.10 0.2008 52.0 86 0290515.20 0.2047 52.0 86 0290525.30 0.2087 52.0 86 0290535.40 0.2126 57.0 93 0290545.50 0.2165 57.0 93 0290555.60 0.2205 57.0 93 0290565.70 0.2244 57.0 93 0290575.75 0.2264 57.0 93 0292765.80 0.2283 57.0 93 0290586.00 0.2362 57.0 93 0290606.10 0.2402 63.0 101 0290616.20 0.2441 63.0 101 0290626.30 0.2480 63.0 101 0290636.40 0.2520 63.0 101 0290646.50 0.2559 63.0 101 0290656.60 0.2598 63.0 101 0290666.70 0.2638 63.0 101 0290676.75 0.2657 69.0 109 0292786.80 0.2677 69.0 109 0290687.00 0.2756 69.0 109 0290707.20 0.2835 69.0 109 0290727.25 0.2854 69.0 109 0292797.30 0.2874 69.0 109 0290737.40 0.2913 69.0 109 0290747.50 0.2953 69.0 109 0290757.60 0.2992 75.0 117 0290767.80 0.3071 75.0 117 0290787.90 0.3110 75.0 117 0290798.00 0.3150 75.0 117 0290808.10 0.3189 75.0 117 0290818.20 0.3228 75.0 117 0290828.25 0.3248 75.0 117 0292828.40 0.3307 75.0 117 0290848.50 0.3346 75.0 117 0290858.60 0.3386 81.0 125 029086



2ABd1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

8.70 0.3425 81.0 125 0290878.75 0.3445 81.0 125 0292838.80 0.3465 81.0 125 0290888.90 0.3504 81.0 125 0290899.00 0.3543 81.0 125 0290909.30 0.3661 81.0 125 0290939.40 0.3701 81.0 125 0290949.50 0.3740 81.0 125 0290959.60 0.3780 87.0 133 0290969.70 0.3819 87.0 133 0290979.80 0.3858 87.0 133 0290989.90 0.3898 87.0 133 02909910.00 0.3937 87.0 133 02910010.20 0.4016 87.0 133 02910210.30 0.4055 87.0 133 02910310.50 0.4134 87.0 133 02910510.80 0.4252 94.0 142 02910810.90 0.4291 94.0 142 029109

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

11.00 0.4331 94.0 142 02911011.20 0.4409 94.0 142 02911211.30 0.4449 94.0 142 02911311.40 0.4488 94.0 142 02911411.50 0.4528 94.0 142 02911511.70 0.4606 94.0 142 02911711.80 0.4646 94.0 142 02911812.00 0.4724 101.0 151 02912012.10 0.4764 101.0 151 02912112.20 0.4803 101.0 151 02912212.50 0.4921 101.0 151 02912512.70 0.5000 101.0 151 02912712.80 0.5039 101.0 151 02912812.90 0.5079 101.0 151 02912913.00 0.5118 101.0 151 02913013.50 0.5315 108.0 160 01613514.00 0.5512 108.0 160 01614014.50 0.5709 114.0 169 01614515.00 0.5906 114.0 169 016150

2A

2A

■

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

0.15 0.0059 1.5 19 0162150.16 0.0063 1.5 19 0162160.17 0.0067 1.5 19 0162170.18 0.0071 1.5 19 0162180.19 0.0075 1.5 19 0162190.20 0.0079 2.5 19 0160020.21 0.0083 2.5 19 0162210.22 0.0087 2.5 19 0162220.23 0.0091 2.5 19 0162230.24 0.0094 2.5 19 016224

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

0.25 0.0098 3.0 19 0162250.26 0.0102 3.0 19 0162260.27 0.0106 3.0 19 0162270.28 0.0110 3.0 19 0162280.29 0.0114 3.0 19 0162290.30 0.0118 3.0 19 0160030.32 0.0126 4.0 19 0162320.44 0.0173 5.0 20 016244

●



2Ad1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

0.45 0.0177 5.0 20 0162450.46 0.0181 5.0 20 0162460.48 0.0189 5.0 20 0162480.50 0.0197 6.0 22 0160050.55 0.0217 7.0 24 0162500.60 0.0236 7.0 24 0160060.65 0.0256 8.0 26 0162510.70 0.0276 9.0 28 0160070.75 0.0295 9.0 28 0162520.80 0.0315 10.0 30 0160080.85 0.0335 10.0 30 0162530.90 0.0354 11.0 32 0160090.95 0.0374 11.0 32 0162541.00 0.0394 12.0 34 0160101.10 0.0433 14.0 36 0160111.15 0.0453 14.0 36 0162561.20 0.0472 16.0 38 0160121.25 0.0492 16.0 38 0162571.30 0.0512 16.0 38 0160131.35 0.0531 18.0 40 0162581.40 0.0551 18.0 40 0160141.45 0.0571 18.0 40 0162591.50 0.0591 18.0 40 0160151.55 0.0610 20.0 43 0162601.60 0.0630 20.0 43 0160161.65 0.0650 20.0 43 0162611.70 0.0669 20.0 43 0160171.75 0.0689 22.0 46 0162621.80 0.0709 22.0 46 0160181.90 0.0748 22.0 46 0160191.95 0.0768 24.0 49 0162642.00 0.0787 24.0 49 0160202.10 0.0827 24.0 49 0160212.15 0.0846 27.0 53 0162662.20 0.0866 27.0 53 0160222.25 0.0886 27.0 53 0162672.30 0.0906 27.0 53 0160232.35 0.0925 27.0 53 0162682.40 0.0945 30.0 57 0160242.50 0.0984 30.0 57 0160252.60 0.1024 30.0 57 0160262.70 0.1063 33.0 61 0160272.75 0.1083 33.0 61 0162702.90 0.1142 33.0 61 0160293.00 0.1181 33.0 61 0160303.10 0.1220 36.0 65 0160313.20 0.1260 36.0 65 0160323.25 0.1280 36.0 65 016271

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

4.50 0.1772 47.0 80 0160454.60 0.1811 47.0 80 0160464.80 0.1890 52.0 86 0160485.00 0.1969 52.0 86 0160505.10 0.2008 52.0 86 0160515.20 0.2047 52.0 86 0160525.30 0.2087 52.0 86 0160535.40 0.2126 57.0 93 0160545.50 0.2165 57.0 93 0160555.60 0.2205 57.0 93 0160565.70 0.2244 57.0 93 0160575.75 0.2264 57.0 93 0162765.80 0.2283 57.0 93 0160586.00 0.2362 57.0 93 0160606.10 0.2402 63.0 101 0160616.20 0.2441 63.0 101 0160626.30 0.2480 63.0 101 0160636.40 0.2520 63.0 101 0160646.50 0.2559 63.0 101 0160656.60 0.2598 63.0 101 0160666.70 0.2638 63.0 101 0160676.75 0.2657 69.0 109 0162786.80 0.2677 69.0 109 0160687.00 0.2756 69.0 109 0160707.20 0.2835 69.0 109 0160727.25 0.2854 69.0 109 0162797.30 0.2874 69.0 109 0160737.40 0.2913 69.0 109 0160747.50 0.2953 69.0 109 0160757.60 0.2992 75.0 117 0160767.80 0.3071 75.0 117 0160787.85 0.3091 75.0 117 0292817.90 0.3110 75.0 117 0160798.00 0.3150 75.0 117 0160808.10 0.3189 75.0 117 0160818.20 0.3228 75.0 117 0160828.25 0.3248 75.0 117 0162828.40 0.3307 75.0 117 0160848.50 0.3346 75.0 117 0160858.60 0.3386 81.0 125 0160868.70 0.3425 81.0 125 0160878.75 0.3445 81.0 125 0162838.80 0.3465 81.0 125 0160888.90 0.3504 81.0 125 0160899.00 0.3543 81.0 125 0160909.30 0.3661 81.0 125 0160939.40 0.3701 81.0 125 0160949.50 0.3740 81.0 125 0160959.60 0.3780 87.0 133 0160969.70 0.3819 87.0 133 0160979.80 0.3858 87.0 133 0160989.90 0.3898 87.0 133 01609910.00 0.3937 87.0 133 01610010.20 0.4016 87.0 133 01610210.30 0.4055 87.0 133 01610310.50 0.4134 87.0 133 016105

3.30 0.1299 36.0 65 0160333.40 0.1339 39.0 70 0160343.50 0.1378 39.0 70 0160353.60 0.1417 39.0 70 0160363.70 0.1457 39.0 70 0160374.00 0.1575 43.0 75 0160404.10 0.1614 43.0 75 0160414.20 0.1654 43.0 75 0160424.30 0.1693 47.0 80 016043

4.40 0.1732 47.0 80 016044


● Foret courtR10P

R10P

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/64 0.0156 3/16 3/4 0106011/32 0.0312 1/2 1.3/8 0106023/64 0.0469 3/4 1.3/4 0106031/16 0.0625 7/8 1.7/8 0106045/64 0.0781 1“ 2“ 0106053/32 0.0938 1.1/4 2.1/4 0106067/64 0.1094 1.1/2 2.5/8 0106071/8 0.1250 1.5/8 2.3/4 0106089/64 0.1406 1.3/4 2.7/8 0106095/32 0.1562 2“ 3.1/8 01061011/64 0.1719 2.1/8 3.1/4 0106113/16 0.1875 2.5/16 3.1/2 01061213/64 0.2031 2.7/16 3.5/8 0106137/32 0.2188 2.1/2 3.3/4 01061415/64 0.2344 2.5/8 3.7/8 0106151/4 0.2500 2.3/4 4“ 01061617/64 0.2656 2.7/8 4.1/8 0106179/32 0.2812 2.15/16 4.1/4 01061819/64 0.2969 3.1/16 4.3/8 0106195/16 0.3125 3.3/16 4.1/2 01062021/64 0.3281 3.5/16 4.5/8 01062111/32 0.3438 3.7/16 4.3/4 010622

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

23/64 0.3594 3.1/2 4.7/8 0106233/8 0.3750 3.5/8 5“ 01062425/64 0.3906 3.3/4 5.1/8 01062513/32 0.4062 3.7/8 5.1/4 01062627/64 0.4219 3.15/16 5.3/8 0106277/16 0.4375 4.1/16 5.1/2 01062829/64 0.4531 4.3/16 5.5/8 01062915/32 0.4688 4.5/16 5.3/4 01063031/64 0.4844 4.3/8 5.7/8 0106311/2 0.5000 4.1/2 6“ 01063233/64 0.5156 4.13/16 6.5/8 01063317/32 0.5312 4.13/16 6.5/8 01063435/64 0.5469 4.13/16 6.5/8 0106359/16 0.5625 4.13/16 6.5/8 01063637/64 0.5781 4.13/16 6.5/8 01063719/32 0.5938 5.3/16 7.1/8 01063839/64 0.6094 5.3/16 7.1/8 0106395/8 0.6250 5.3/16 7.1/8 01064041/64 0.6406 5.3/16 7.1/8 01064121/32 0.6562 5.3/16 7.1/8 01064243/64 0.6719 5.5/8 7.5/8 01064311/16 0.6875 5.5/8 7.5/8 010644


2Ad1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

10.60 0.4173 87.0 133 01610610.80 0.4252 94.0 142 01610810.90 0.4291 94.0 142 01610911.00 0.4331 94.0 142 01611011.20 0.4409 94.0 142 01611211.30 0.4449 94.0 142 01611311.40 0.4488 94.0 142 01611411.50 0.4528 94.0 142 01611511.70 0.4606 94.0 142 01611711.80 0.4646 94.0 142 01611812.00 0.4724 101.0 151 01612012.10 0.4764 101.0 151 01612112.20 0.4803 101.0 151 01612212.50 0.4921 101.0 151 016125

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

12.70 0.5000 101.0 151 01612712.80 0.5039 101.0 151 01612812.90 0.5079 101.0 151 01612913.00 0.5118 101.0 151 01613013.50 0.5315 108.0 160 03413514.00 0.5512 108.0 160 03414014.50 0.5709 114.0 169 03414515.00 0.5906 114.0 169 03415015.50 0.6102 120.0 178 01615516.00 0.6299 120.0 178 01616016.50 0.6496 125.0 184 01616517.00 0.6693 125.0 184 01617017.50 0.6890 130.0 191 016175


R18P

R18P

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

97 0.0059 1/16 3/4 01869796 0.0063 1/16 3/4 01869695 0.0067 1/16 3/4 01869594 0.0071 1/16 3/4 01869493 0.0075 1/16 3/4 01869392 0.0079 1/16 3/4 01869291 0.0083 5/64 3/4 01869190 0.0087 5/64 3/4 01869089 0.0091 5/64 3/4 01868988 0.0095 5/64 3/4 01868887 0.0100 5/64 3/4 01868786 0.0105 3/32 3/4 01868685 0.0110 3/32 3/4 01868584 0.0115 3/32 3/4 01868483 0.0120 3/32 3/4 01868382 0.0125 3/32 3/4 01868281 0.0130 3/32 3/4 01868180 0.0135 1/8 3/4 01868079 0.0145 1/8 3/4 01867978 0.0160 3/16 7/8 01867877 0.0180 3/16 7/8 01867776 0.0200 3/16 7/8 01867675 0.0210 1/4 1“ 01867574 0.0225 1/4 1“ 01867473 0.0240 5/16 1.1/8 01867372 0.0250 5/16 1.1/8 01867271 0.0260 3/8 1.1/4 01867170 0.0280 3/8 1.1/4 01867069 0.0292 1/2 1.3/8 01866968 0.0310 1/2 1.3/8 01866867 0.0320 1/2 1.3/8 01866766 0.0330 1/2 1.3/8 01866665 0.0350 5/8 1.1/2 01866564 0.0360 5/8 1.1/2 018664

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

63 0.0370 5/8 1.1/2 01866362 0.0380 5/8 1.1/2 01866261 0.0390 11/16 1.5/8 01866160 0.0400 11/16 1.5/8 01866059 0.0410 11/16 1.5/8 01865958 0.0420 11/16 1.5/8 01865857 0.0430 3/4 1.3/4 01865756 0.0465 3/4 1.3/4 01865655 0.0520 7/8 1.7/8 01865554 0.0550 7/8 1.7/8 01865453 0.0595 7/8 1.7/8 01865352 0.0635 7/8 1.7/8 01865251 0.0670 1“ 2“ 01865150 0.0700 1“ 2“ 01865049 0.0730 1“ 2“ 01864948 0.0760 1“ 2“ 01864847 0.0785 1“ 2“ 01864746 0.0810 1.1/8 2.1/8 01864645 0.0820 1.1/8 2.1/8 01864544 0.0860 1.1/8 2.1/8 01864443 0.0890 1.1/4 2.1/4 01864342 0.0935 1.1/4 2.1/4 01864241 0.0960 1.3/8 2.3/8 01864140 0.0980 1.3/8 2.3/8 01864039 0.0995 1.3/8 2.3/8 01863938 0.1015 1.7/16 2.1/2 01863837 0.1040 1.7/16 2.1/2 01863736 0.1065 1.7/16 2.1/2 01863635 0.1100 1.1/2 2.5/8 01863534 0.1110 1.1/2 2.5/8 01863433 0.1130 1.1/2 2.5/8 01863332 0.1160 1.5/8 2.3/4 01863231 0.1200 1.5/8 2.3/4 01863130 0.1285 1.5/8 2.3/4 018630



R18P d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

29 0.1360 1.3/4 2.7/8 01862928 0.1405 1.3/4 2.7/8 01862827 0.1440 1.7/8 3“ 01862726 0.1470 1.7/8 3“ 01862625 0.1495 1.7/8 3“ 01862524 0.1520 2“ 3.1/8 01862423 0.1540 2“ 3.1/8 01862322 0.1570 2“ 3.1/8 01862221 0.1590 2.1/8 3.1/4 01862120 0.1610 2.1/8 3.1/4 01862019 0.1660 2.1/8 3.1/4 01861918 0.1695 2.1/8 3.1/4 01861817 0.1730 2.3/16 3.3/8 01861716 0.1770 2.3/16 3.3/8 01861615 0.1800 2.3/16 3.3/8 01861514 0.1820 2.3/16 3.3/8 018614

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

13 0.1850 2.5/16 3.1/2 01861312 0.1890 2.5/16 3.1/2 01861211 0.1910 2.5/16 3.1/2 01861110 0.1935 2.7/16 3.5/8 0186109 0.1960 2.7/16 3.5/8 0186098 0.1990 2.7/16 3.5/8 0186087 0.2010 2.7/16 3.5/8 0186076 0.2040 2.1/2 3.3/4 0186065 0.2055 2.1/2 3.3/4 0186054 0.2090 2.1/2 3.3/4 0186043 0.2130 2.1/2 3.3/4 0186032 0.2210 2.5/8 3.7/8 0186021 0.2280 2.5/8 3.7/8 018601

● Foret court

R15P

R15P

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 2.5/8 3.7/8 015601B 0.2380 2.3/4 4“ 015602C 0.2420 2.3/4 4“ 015603D 0.2460 2.3/4 4“ 015604E 0.2500 2.3/4 4“ 015605F 0.2570 2.7/8 4.1/8 015606G 0.2610 2.7/8 4.1/8 015607H 0.2660 2.7/8 4.1/8 015608I 0.2720 2.7/8 4.1/8 015609J 0.2770 2.7/8 4.1/8 015610K 0.2810 2.15/16 4.1/4 015611L 0.2900 2.15/16 4.1/4 015612M 0.2950 3.1/16 4.3/8 015613N 0.3020 3.1/16 4.3/8 015614

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 3.3/16 4.1/2 015615P 0.3230 3.5/16 4.5/8 015616Q 0.3320 3.7/16 4.3/4 015617R 0.3390 3.7/16 4.3/4 015618S 0.3480 3.1/2 4.7/8 015619T 0.3580 3.1/2 4.7/8 015620U 0.3680 3.5/8 5“ 015621V 0.3770 3.5/8 5“ 015622W 0.3860 3.3/4 5.1/8 015623X 0.3970 3.3/4 5.1/8 015624Y 0.4040 3.7/8 5.1/4 015625Z 0.4130 3.7/8 5.1/4 015626



6.30 0.2480 70 102 0310636.40 0.2520 73 105 0310646.50 0.2559 73 105 0310656.60 0.2598 73 105 0310666.70 0.2638 73 105 0310676.80 0.2677 73 105 0310686.90 0.2717 73 105 0310697.00 0.2756 73 105 0310707.10 0.2795 75 108 0310717.20 0.2835 75 108 0310727.30 0.2874 75 108 0310737.40 0.2913 78 111 031074

● Foret court

R10PM

R10PM

■

●

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

0.50 0.0197 5 22 0310050.60 0.0236 8 29 0310060.70 0.0276 11 32 0310070.80 0.0315 13 35 0310080.85 0.0335 16 38 0312530.90 0.0354 16 38 0310091.00 0.0394 17 41 0310101.05 0.0413 17 41 0312551.10 0.0433 19 44 0310111.15 0.0453 19 44 0312561.20 0.0472 22 48 0310121.25 0.0492 22 48 0312571.30 0.0512 22 48 0310131.35 0.0531 22 48 0312581.40 0.0551 22 48 0310141.45 0.0571 22 48 0312591.50 0.0591 22 48 0310151.55 0.0610 22 48 0312601.60 0.0630 22 48 0310161.70 0.0669 25 51 0310171.75 0.0689 25 51 0312621.80 0.0709 25 51 0310181.85 0.0728 25 51 0312631.90 0.0748 25 51 0310191.95 0.0768 25 51 0312642.00 0.0787 25 51 0310202.05 0.0807 29 54 0312652.10 0.0827 29 54 0310212.20 0.0866 32 57 0310222.30 0.0906 32 57 0310232.40 0.0945 35 60 0310242.50 0.0984 35 60 0310252.60 0.1024 37 64 0310262.70 0.1063 37 64 0310272.80 0.1102 38 67 0310283.00 0.1181 41 70 0310303.10 0.1220 41 70 0310313.20 0.1260 41 70 0310323.30 0.1299 44 73 0310333.40 0.1339 44 73 031034

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

3.50 0.1378 44 73 0310353.60 0.1417 48 76 0310363.70 0.1457 48 76 0310373.80 0.1496 48 76 0310383.90 0.1535 51 79 0310394.00 0.1575 54 83 0310404.10 0.1614 54 83 0310414.20 0.1654 54 83 0310424.30 0.1693 54 83 0310434.40 0.1732 56 86 0310444.50 0.1772 56 86 0310454.60 0.1811 56 86 0310464.70 0.1850 59 89 0310474.80 0.1890 59 89 0310484.90 0.1929 62 92 0310495.00 0.1969 62 92 0310505.10 0.2008 62 92 0310515.20 0.2047 64 95 0310525.30 0.2087 64 95 0310535.40 0.2126 64 95 0310545.50 0.2165 64 95 0310555.60 0.2205 67 98 0310565.70 0.2244 67 98 0310575.80 0.2283 67 98 0310585.90 0.2323 67 98 0310596.00 0.2362 70 102 0310606.10 0.2402 70 102 0310616.20 0.2441 70 102 031062



R10PMd1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

7.50 0.2953 78 111 0310757.60 0.2992 78 111 0310767.70 0.3031 81 114 0310777.80 0.3071 81 114 0310787.90 0.3110 81 114 0310798.00 0.3150 81 114 0310808.10 0.3189 84 117 0310818.20 0.3228 84 117 0310828.30 0.3268 84 117 0310838.40 0.3307 87 121 0310848.50 0.3346 87 121 0310858.60 0.3386 87 121 0310868.70 0.3425 87 121 0310878.80 0.3465 89 124 0310888.90 0.3504 89 124 0310899.00 0.3543 89 124 0310909.10 0.3583 89 124 0310919.20 0.3622 92 127 0310929.30 0.3661 92 127 0310939.40 0.3701 92 127 031094

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

9.50 0.3740 92 127 0310959.60 0.3780 95 130 0310969.70 0.3819 95 130 0310979.80 0.3858 95 130 0310989.90 0.3898 95 130 03109910.00 0.3937 95 130 03110010.20 0.4016 98 133 03110210.50 0.4134 98 133 03110511.00 0.4331 103 140 03111011.20 0.4409 106 143 03111211.50 0.4528 106 143 03111512.00 0.4724 111 149 03112012.50 0.4921 114 152 03112513.00 0.5118 114 152 03113013.50 0.5315 122 168 03113514.00 0.5512 122 168 03114015.00 0.5906 132 181 03115016.00 0.6299 132 181 031160


● Foret court

R08

R08

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/8 0.1250 1.5/8 2.3/4 01750830 0.1285 1.5/8 2.3/4 01763029 0.1360 1.3/4 2.7/8 0176299/64 0.1406 1.3/4 2.7/8 01750924 0.1520 2“ 3.1/8 0176245/32 0.1562 2“ 3.1/8 01751020 0.1610 2.1/8 3.1/4 01762019 0.1660 2.1/8 3.1/4 01761918 0.1695 2.1/8 3.1/4 01761811/64 0.1719 2.1/8 3.1/4 01751117 0.1730 2.3/16 3.3/8 01761716 0.1770 2.3/16 3.3/8 01761615 0.1800 2.3/16 3.3/8 01761513 0.1850 2.5/16 3.1/2 0176133/16 0.1875 2.5/16 3.1/2 01751211 0.1910 2.5/16 3.1/2 01761110 0.1935 2.7/16 3.5/8 01761013/64 0.2031 2.7/16 3.5/8 0175133 0.2130 2.1/2 3.3/4 0176037/32 0.2188 2.1/2 3.3/4 0175141 0.2280 2.5/8 3.7/8 01760115/64 0.2344 2.5/8 3.7/8 0175151/4 0.2500 2.3/4 4“ 017516F 0.2570 2.7/8 4.1/8 017706G 0.2610 2.7/8 4.1/8 01770717/64 0.2656 2.7/8 4.1/8 017517I 0.2720 2.7/8 4.1/8 017709J 0.2770 2.7/8 4.1/8 0177109/32 0.2812 2.15/16 4.1/4 01751819/64 0.2969 3.1/16 4.3/8 0175195/16 0.3125 3.3/16 4.1/2 017520O 0.3160 3.3/16 4.1/2 017715

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

P 0.3230 3.5/16 4.5/8 01771621/64 0.3281 3.5/16 4.5/8 017521Q 0.3320 3.7/16 4.3/4 017717R 0.3390 3.7/16 4.3/4 01771811/32 0.3438 3.7/16 4.3/4 017522S 0.3480 3.1/2 4.7/8 01771923/64 0.3594 3.1/2 4.7/8 017523U 0.3680 3.5/8 5“ 0177213/8 0.3750 3.5/8 5“ 017524W 0.3860 3.3/4 5.1/8 01772325/64 0.3906 3.3/4 5.1/8 017525X 0.3970 3.3/4 5.1/8 01772413/32 0.4062 3.7/8 5.1/4 01752627/64 0.4219 3.15/16 5.3/8 0175277/16 0.4375 4.1/16 5.1/2 01752829/64 0.4531 4.3/16 5.5/8 01752915/32 0.4688 4.5/16 5.3/4 01753031/64 0.4844 4.3/8 5.7/8 0175311/2 0.5000 4.1/2 6“ 01753233/64 0.5156 4.13/16 6.5/8 01753317/32 0.5312 4.13/16 6.5/8 01753435/64 0.5469 4.13/16 6.5/8 0175359/16 0.5625 4.13/16 6.5/8 01753637/64 0.5781 4.13/16 6.5/8 01753719/32 0.5938 5.3/16 7.1/8 01753839/64 0.6094 5.3/16 7.1/8 0175395/8 0.6250 5.3/16 7.1/8 01754041/64 0.6406 5.3/16 7.1/8 01754121/32 0.6562 5.3/16 7.1/8 01754243/64 0.6719 5.5/8 7.5/8 01754311/16 0.6875 5.5/8 7.5/8 017544

● Jobber Drill ● Broca, serie corta● Automotive, tanged shank


● Foret court

d1 ØInch

d1dec.Inch

l2 Inch

l1 Inch

EDP #or e-Code

9/32 0.2812 2.15/16 4.1/4 01051819/64 0.2969 3.1/16 4.3/8 0105195/16 0.3125 3.3/16 4.1/2 01052021/64 0.3281 3.5/16 4.5/8 01052111/32 0.3438 3.7/16 4.3/4 01052223/64 0.3594 3.1/2 4.7/8 0105233/8 0.3750 3.5/8 5“ 01052425/64 0.3906 3.3/4 5.1/8 01052513/32 0.4062 3.7/8 5.1/4 01052627/64 0.4219 3.15/16 5.3/8 0105277/16 0.4375 4.1/16 5.1/2 01052829/64 0.4531 4.3/16 5.5/8 01052915/32 0.4688 4.5/16 5.3/4 01053031/64 0.4844 4.3/8 5.7/8 0105311/2 0.5000 4.1/2 6“ 010532

R10H

R10H

■

●

d1 ØInch

d1dec.Inch

l2 Inch

l1 Inch

EDP #or e-Code

1/32 0.0312 1/2 1.3/8 0105023/64 0.0469 3/4 1.3/4 0105031/16 0.0625 7/8 1.7/8 0105045/64 0.0781 1“ 2“ 0105053/32 0.0938 1.1/4 2.1/4 0105067/64 0.1094 1.1/2 2.5/8 0105071/8 0.1250 1.5/8 2.3/4 0105089/64 0.1406 1.3/4 2.7/8 0105095/32 0.1562 2“ 3.1/8 01051011/64 0.1719 2.1/8 3.1/4 0105113/16 0.1875 2.5/16 3.1/2 01051213/64 0.2031 2.7/16 3.5/8 0105137/32 0.2188 2.1/2 3.3/4 01051415/64 0.2344 2.5/8 3.7/8 0105151/4 0.2500 2.3/4 4“ 01051617/64 0.2656 2.7/8 4.1/8 010517

● Jobber Drill ● Broca, serie corta● High Helix


R18H

R18H

12 0.1890 2.5/16 3.1/2 01851211 0.1910 2.5/16 3.1/2 01851110 0.1935 2.7/16 3.5/8 0185109 0.1960 2.7/16 3.5/8 0185098 0.1990 2.7/16 3.5/8 0185087 0.2010 2.7/16 3.5/8 0185076 0.2040 2.1/2 3.3/4 0185065 0.2055 2.1/2 3.3/4 0185054 0.2090 2.1/2 3.3/4 0185043 0.2130 2.1/2 3.3/4 0185032 0.2210 2.5/8 3.7/8 0185021 0.2280 2.5/8 3.7/8 018501

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

80 0.0135 1/8 3/4 01858079 0.0145 1/8 3/4 01857978 0.0160 3/16 7/8 01857877 0.0180 3/16 7/8 01857776 0.0200 3/16 7/8 01857675 0.0210 1/4 1“ 01857574 0.0225 1/4 1“ 01857473 0.0240 5/16 1.1/8 01857372 0.0250 5/16 1.1/8 01857271 0.0260 3/8 1.1/4 01857170 0.0280 3/8 1.1/4 01857069 0.0292 1/2 1.3/8 01856968 0.0310 1/2 1.3/8 01856867 0.0320 1/2 1.3/8 01856766 0.0330 1/2 1.3/8 01856665 0.0350 5/8 1.1/2 01856564 0.0360 5/8 1.1/2 01856463 0.0370 5/8 1.1/2 01856362 0.0380 5/8 1.1/2 01856261 0.0390 11/16 1.5/8 01856160 0.0400 11/16 1.5/8 01856059 0.0410 11/16 1.5/8 01855958 0.0420 11/16 1.5/8 01855857 0.0430 3/4 1.3/4 01855756 0.0465 3/4 1.3/4 01855655 0.0520 7/8 1.7/8 01855554 0.0550 7/8 1.7/8 01855453 0.0595 7/8 1.7/8 01855352 0.0635 7/8 1.7/8 01855251 0.0670 1“ 2“ 01855150 0.0700 1“ 2“ 01855049 0.0730 1“ 2“ 01854948 0.0760 1“ 2“ 01854847 0.0785 1“ 2“ 01854746 0.0810 1.1/8 2.1/8 01854645 0.0820 1.1/8 2.1/8 01854544 0.0860 1.1/8 2.1/8 01854443 0.0890 1.1/4 2.1/4 01854342 0.0935 1.1/4 2.1/4 01854241 0.0960 1.3/8 2.3/8 01854140 0.0980 1.3/8 2.3/8 01854039 0.0995 1.3/8 2.3/8 018539

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

38 0.1015 1.7/16 2.1/2 01853837 0.1040 1.7/16 2.1/2 01853736 0.1065 1.7/16 2.1/2 01853635 0.1100 1.1/2 2.5/8 01853534 0.1110 1.1/2 2.5/8 01853433 0.1130 1.1/2 2.5/8 01853332 0.1160 1.5/8 2.3/4 01853231 0.1200 1.5/8 2.3/4 01853130 0.1285 1.5/8 2.3/4 01853029 0.1360 1.3/4 2.7/8 01852928 0.1405 1.3/4 2.7/8 01852827 0.1440 1.7/8 3“ 01852726 0.1470 1.7/8 3“ 01852625 0.1495 1.7/8 3“ 01852524 0.1520 2“ 3.1/8 01852423 0.1540 2“ 3.1/8 01852322 0.1570 2“ 3.1/8 01852221 0.1590 2.1/8 3.1/4 01852120 0.1610 2.1/8 3.1/4 01852019 0.1660 2.1/8 3.1/4 01851918 0.1695 2.1/8 3.1/4 01851817 0.1730 2.3/16 3.3/8 01851716 0.1770 2.3/16 3.3/8 01851615 0.1800 2.3/16 3.3/8 01851514 0.1820 2.3/16 3.3/8 01851413 0.1850 2.5/16 3.1/2 018513

● Foret court● Jobber Drill ● Broca , serie corta● High Helix


● Foret court

12 0.1890 2.5/16 3.1/2 01871211 0.1910 2.5/16 3.1/2 01871110 0.1935 2.7/16 3.5/8 0187109 0.1960 2.7/16 3.5/8 0187098 0.1990 2.7/16 3.5/8 0187087 0.2010 2.7/16 3.5/8 0187076 0.2040 2.1/2 3.3/4 0187065 0.2055 2.1/2 3.3/4 0187054 0.2090 2.1/2 3.3/4 0187043 0.2130 2.1/2 3.3/4 0187032 0.2210 2.5/8 3.7/8 0187021 0.2280 2.5/8 3.7/8 018701

R18S

R18S

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

80 0.0135 1/8 3/4 01878079 0.0145 1/8 3/4 01877978 0.0160 3/16 7/8 01877877 0.0180 3/16 7/8 01877776 0.0200 3/16 7/8 01877675 0.0210 1/4 1“ 01877574 0.0225 1/4 1“ 01877473 0.0240 5/16 1.1/8 01877372 0.0250 5/16 1.1/8 01877271 0.0260 3/8 1.1/4 01877170 0.0280 3/8 1.1/4 01877069 0.0292 1/2 1.3/8 01876968 0.0310 1/2 1.3/8 01876867 0.0320 1/2 1.3/8 01876766 0.0330 1/2 1.3/8 01876665 0.0350 5/8 1.1/2 01876564 0.0360 5/8 1.1/2 01876463 0.0370 5/8 1.1/2 01876362 0.0380 5/8 1.1/2 01876261 0.0390 11/16 1.5/8 01876160 0.0400 11/16 1.5/8 01876059 0.0410 11/16 1.5/8 01875958 0.0420 11/16 1.5/8 01875857 0.0430 3/4 1.3/4 01875756 0.0465 3/4 1.3/4 01875655 0.0520 7/8 1.7/8 01875554 0.0550 7/8 1.7/8 01875453 0.0595 7/8 1.7/8 01875352 0.0635 7/8 1.7/8 01875251 0.0670 1“ 2“ 01875150 0.0700 1“ 2“ 01875049 0.0730 1“ 2“ 01874948 0.0760 1“ 2“ 01874847 0.0785 1“ 2“ 01874746 0.0810 1.1/8 2.1/8 01874645 0.0820 1.1/8 2.1/8 01874544 0.0860 1.1/8 2.1/8 01874443 0.0890 1.1/4 2.1/4 01874342 0.0935 1.1/4 2.1/4 01874241 0.0960 1.3/8 2.3/8 01874140 0.0980 1.3/8 2.3/8 01874039 0.0995 1.3/8 2.3/8 018739

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

38 0.1015 1.7/16 2.1/2 01873837 0.1040 1.7/16 2.1/2 01873736 0.1065 1.7/16 2.1/2 01873635 0.1100 1.1/2 2.5/8 01873534 0.1110 1.1/2 2.5/8 01873433 0.1130 1.1/2 2.5/8 01873332 0.1160 1.5/8 2.3/4 01873231 0.1200 1.5/8 2.3/4 01873130 0.1285 1.5/8 2.3/4 01873029 0.1360 1.3/4 2.7/8 01872928 0.1405 1.3/4 2.7/8 01872827 0.1440 1.7/8 3“ 01872726 0.1470 1.7/8 3“ 01872625 0.1495 1.7/8 3“ 01872524 0.1520 2“ 3.1/8 01872423 0.1540 2“ 3.1/8 01872322 0.1570 2“ 3.1/8 01872221 0.1590 2.1/8 3.1/4 01872120 0.1610 2.1/8 3.1/4 01872019 0.1660 2.1/8 3.1/4 01871918 0.1695 2.1/8 3.1/4 01871817 0.1730 2.3/16 3.3/8 01871716 0.1770 2.3/16 3.3/8 01871615 0.1800 2.3/16 3.3/8 01871514 0.1820 2.3/16 3.3/8 01871413 0.1850 2.5/16 3.1/2 018713

● Jobber Drill ● Broca, serie corta● Slow Helix


L10

■ ●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/32 0.0312 1/2 1.3/8 0109023/64 0.0469 3/4 1.3/4 0109031/16 0.0625 7/8 1.7/8 0109045/64 0.0781 1“ 2“ 0109053/32 0.0938 1.1/4 2.1/4 0109067/64 0.1094 1.1/2 2.5/8 0109071/8 0.1250 1.5/8 2.3/4 0109089/64 0.1406 1.3/4 2.7/8 0109095/32 0.1562 2“ 3.1/8 01091011/64 0.1719 2.1/8 3.1/4 0109113/16 0.1875 2.5/16 3.1/2 01091213/64 0.2031 2.7/16 3.5/8 0109137/32 0.2188 2.1/2 3.3/4 01091415/64 0.2344 2.5/8 3.7/8 0109151/4 0.2500 2.3/4 4“ 01091617/64 0.2656 2.7/8 4.1/8 010917

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 2.15/16 4.1/4 01091819/64 0.2969 3.1/16 4.3/8 0109195/16 0.3125 3.3/16 4.1/2 01092021/64 0.3281 3.5/16 4.5/8 01092111/32 0.3438 3.7/16 4.3/4 01092223/64 0.3594 3.1/2 4.7/8 0109233/8 0.3750 3.5/8 5“ 01092425/64 0.3906 3.3/4 5.1/8 01092513/32 0.4062 3.7/8 5.1/4 01092627/64 0.4219 3.15/16 5.3/8 0109277/16 0.4375 4.1/16 5.1/2 01092829/64 0.4531 4.3/16 5.5/8 01092915/32 0.4688 4.5/16 5.3/4 01093031/64 0.4844 4.3/8 5.7/8 0109311/2 0.5000 4.1/2 6“ 010932


R10S - L10

R10S

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 7/8 1.7/8 0107045/64 0.0781 1“ 2“ 0107053/32 0.0938 1.1/4 2.1/4 0107067/64 0.1094 1.1/2 2.5/8 0107071/8 0.1250 1.5/8 2.3/4 0107089/64 0.1406 1.3/4 2.7/8 0107095/32 0.1562 2“ 3.1/8 01071011/64 0.1719 2.1/8 3.1/4 0107113/16 0.1875 2.5/16 3.1/2 01071213/64 0.2031 2.7/16 3.5/8 0107137/32 0.2188 2.1/2 3.3/4 01071415/64 0.2344 2.5/8 3.7/8 0107151/4 0.2500 2.3/4 4“ 01071617/64 0.2656 2.7/8 4.1/8 010717

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 2.15/16 4.1/4 01071819/64 0.2969 3.1/16 4.3/8 0107195/16 0.3125 3.3/16 4.1/2 01072021/64 0.3281 3.5/16 4.5/8 01072111/32 0.3438 3.7/16 4.3/4 01072223/64 0.3594 3.1/2 4.7/8 0107233/8 0.3750 3.5/8 5“ 01072425/64 0.3906 3.3/4 5.1/8 01072513/32 0.4062 3.7/8 5.1/4 01072627/64 0.4219 3.15/16 5.3/8 0107277/16 0.4375 4.1/16 5.1/2 01072829/64 0.4531 4.3/16 5.5/8 01072915/32 0.4688 4.5/16 5.3/4 01073031/64 0.4844 4.3/8 5.7/8 0107311/2 0.5000 4.1/2 6“ 010732

● Jobber Drill ● Foret court ● Broca, serie corta

● Left Hand

● Slow Helix


L18

L18

■

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 11/16 1.5/8 01896059 0.0410 11/16 1.5/8 01895958 0.0420 11/16 1.5/8 01895857 0.0430 3/4 1.3/4 01895756 0.0465 3/4 1.3/4 01895655 0.0520 7/8 1.7/8 01895554 0.0550 7/8 1.7/8 01895453 0.0595 7/8 1.7/8 01895352 0.0635 7/8 1.7/8 01895251 0.0670 1“ 2“ 01895150 0.0700 1“ 2“ 01895049 0.0730 1“ 2“ 01894948 0.0760 1“ 2“ 01894847 0.0785 1“ 2“ 01894746 0.0810 1.1/8 2.1/8 01894648 0.0820 1.1/8 2.1/8 01894544 0.0860 1.1/8 2.1/8 01894443 0.0890 1.1/4 2.1/4 01894342 0.0935 1.1/4 2.1/4 01894241 0.0960 1.3/8 2.3/8 01894140 0.0980 1.3/8 2.3/8 01894039 0.0995 1.3/8 2.3/8 01893938 0.1015 1.7/16 2.1/2 01893837 0.1040 1.7/16 2.1/2 01893736 0.1065 1.7/16 2.1/2 01893635 0.1100 1.1/2 2.5/8 01893534 0.1110 1.1/2 2.5/8 01893433 0.1130 1.1/2 2.5/8 01893332 0.1160 1.5/8 2.3/4 01893231 0.1200 1.5/8 2.3/4 018931

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

30 0.1285 1.5/8 2.3/4 01893029 0.1360 1.3/4 2.7/8 01892928 0.1405 1.3/4 2.7/8 01892827 0.1440 1.7/8 3“ 01892726 0.1470 1.7/8 3“ 01892625 0.1495 1.7/8 3“ 01892524 0.1520 2“ 3.1/8 01892423 0.1540 2“ 3.1/8 01892322 0.1570 2“ 3.1/8 01892221 0.1590 2.1/8 3.1/4 01892120 0.1610 2.1/8 3.1/4 01892019 0.1660 2.1/8 3.1/4 01891918 0.1695 2.1/8 3.1/4 01891817 0.1730 2.3/16 3.3/8 01891716 0.1770 2.3/16 3.3/8 01891615 0.1800 2.3/16 3.3/8 01891514 0.1820 2.3/16 3.3/8 01891413 0.1850 2.5/16 3.1/2 01891312 0.1890 2.5/16 3.1/2 01891211 0.1910 2.5/16 3.1/2 01891110 0.1935 2.7/16 3.5/8 0189109 0.1960 2.7/16 3.5/8 0189098 0.1990 2.7/16 3.5/8 0189087 0.2010 2.7/16 3.5/8 0189076 0.2040 2.1/2 3.3/4 0189065 0.2055 2.1/2 3.3/4 0189054 0.2090 2.1/2 3.3/4 0189043 0.2130 2.1/2 3.3/4 0189032 0.2210 2.5/8 3.7/8 0189021 0.2280 2.5/8 3.7/8 018901

● Foret court● Jobber Drill ● Broca , serie corta● Left Hand

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Prod-

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

Range-Dim

Laun-chLogo-



HS

S T

aper

Len

gth

Dril

ls

HSS Taper Length Drills

108

1

23

4

1

2

3


Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find Depth of Cut and other Product Features.Find the Surface Feet Per Minute (SFM) and Alpha Code. example: 125 F 125 = SFM F = Alpha Code to find your Feed Rate



Finish/Coating:


Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:Point Style:




A578 A916QC91CO

QC91-COM

110-111 112-113 114-115 116●161G ●115F ■125F●138G ●98F ■75F■115F ■82E ■79H■115F ■82E ■75F■69D ■49C ●59D■56D ■39C ■20B

●56C ●49C ●95H ●115H■30E ■23E ●56F ●66F●36B ●30B ●56D ●66D

■30D■131G ●161H ■184H■118F ●85E ●85H ■98H■82F ●59E ●85F ●105F■59D ●43C ●56D ●66D●82F ■59E●59D ■43C●26D ■20C ■20D

●66H■20B●10B

●213F ■112I●230F ■98H

●157H ●112G ■98H●138H ●98G

●230E ■440H■148N ■384H●131N

■138H ●98G ■344H●180H●131F

Page # for easy reference Surface Feet per Minute (SFM)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


HS

S T

aper

Len

gth

Dril

ls

109

HSS Taper Length Drills (con‘t)

QC91GQC21GM

QC91QC91M

QC91PQC91PM

M51CO M52CO R53OH R51OH EZ51P R51K

R51 R52 R55

5ATL R09R51FS R52FS R55FS

117, 120 118, 121 119, 122 123-124 125 125 126 127 128-130 131-132 133 134-135■115F ■98F ■98F ●89G ■154F ■154F ■98F ■98F ●89G ●89G ■98F■69F ■59F ■59F ●82G ■75F ■75F ■59F ■59F ●82G ●82G ■59F■75H ■69H ■66H ●66E ■98H ■98H ■66H ■66H ●66E ●66E ■66H■69F ■59F ■59F ●52E ■85F ■85F ■59F ■59F ●52E ●52E ■59F●56D ●46D ●46D ●30D ●59D ●59D ●46D ●46D ●30D ●30D ●46D

●20B ●30B ●30B ●20B ●20B

●105H ●89H ●89H ●33D ●121H ●121H ●89H ●89H ●33D ●33D ●89H●59F ●49F ●49F ●20F ●66F ●66F ●46F ●49F ●20F ●20F ●49F●59D ●49D ●49D ●13B ●66D ●66D ●49D ●49D ●13B ●13B ●49D

●49D ●49D■171H ■151H ■151H ●92H ■180H ■180H ■151H ■151H ●92H ●92H ■151H■89H ■79H ■79H ●69E ■112H ■112H ■79H ■79H ●69E ●69E ■79H●95F ●85F ●79F ●49D ●134F ●134F ●79F ●79F ●49D ●49D ●79F●59D ●43D ●75D ●75D ●43D ●43D

●95H ●89H ●56E ●112H ●112H ●89H ●89H ●56E ●56E ●89H●49F ●49F ●30C ●98F ●98F ●49F ●49F ●30C ●30C ●49F

●13A ●26D ●26D ●13A ●13A●59H ●49F ●49F ●26F ●75F ●75F ●49F ●49F ●26F ●26F ●49F

●13D ●30B ●30B ●13D ●13D●10A ●10A ●10A

■98I ●89I ●98E ■125I ■89I ●89I ●98E ●98E ●89I ■89I■89H ●79H ●105H ■184H ■85H ●79H ●105H ●105H ●79H■89H ●79H ●89G ■180H ■79H ●75H ●89G ●89G ●75H

●52E ■184H ●52E ●52E■400H ●351H ●105I ■420H ■351H ●105I ●105I ■348H■351H ●325H ●89H ■374H ■325H ●89H ●89H ■325H

●89G ■298H ●89G ●89G■315H ●276H ●82E ■364H ■276H ●82E ●82E ■276H

●115I ●115I ●115I●85G ●85G ●85G●39E ●39E ●39E●10A ●10A ●10A

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


A578

A578

■

●

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #or e-Code

1.00 0.0393 33 56 0613832 A5781.01.50 0.0590 45 70 0613849 A5781.52.00 0.0787 56 85 0613856 A5782.02.50 0.0984 62 95 0613863 A5782.53.00 0.1181 66 100 0279229 A5783.03.10 0.1220 69 106 0587027 A5783.13.20 0.1259 69 106 0587034 A5783.23.30 0.1299 69 106 0279236 A5783.33.40 0.1338 73 112 0279243 A5783.43.50 0.1377 73 112 0279250 A5783.53.60 0.1417 73 112 0587041 A5783.63.70 0.1456 73 112 0587058 A5783.73.80 0.1496 78 119 0587065 A5783.83.90 0.1535 78 119 0587072 A5783.94.00 0.1574 78 119 0279267 A5784.04.10 0.1614 78 119 0587089 A5784.14.20 0.1653 78 119 0279274 A5784.24.30 0.1692 82 126 0587096 A5784.34.40 0.1732 82 126 0587102 A5784.44.50 0.1771 82 126 0279281 A5784.54.60 0.1811 82 126 0587119 A5784.64.70 0.1850 82 126 0587126 A5784.74.80 0.1889 87 132 0587133 A5784.84.90 0.1929 87 132 0587140 A5784.95.00 0.1968 87 132 0279298 A5785.05.10 0.2007 87 132 0587157 A5785.15.20 0.2047 87 132 0587164 A5785.25.30 0.2086 87 132 0587171 A5785.35.40 0.2125 91 139 0587188 A5785.45.50 0.2165 91 139 0279304 A5785.55.60 0.2204 91 139 0587195 A5785.65.70 0.2244 91 139 0587201 A5785.7

● Foret PFXsérie longue● PFX long series drill ● Broca PFX - serie larga

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #or e-Code

5.80 0.2283 91 139 0587218 A5785.85.90 0.2322 91 139 0587225 A5785.96.00 0.2362 91 139 0279311 A5786.06.10 0.2401 97 148 0587232 A5786.16.20 0.2440 97 148 0587249 A5786.26.30 0.2480 97 148 0587256 A5786.36.40 0.2519 97 148 0587263 A5786.46.50 0.2559 97 148 0279328 A5786.56.60 0.2598 97 148 0279335 A5786.66.70 0.2637 97 148 0587270 A5786.76.80 0.2677 102 156 0279342 A5786.86.90 0.2716 102 156 0587287 A5786.97.00 0.2755 102 156 0279359 A5787.07.10 0.2795 102 156 0587294 A5787.17.20 0.2834 102 156 0587300 A5787.27.30 0.2874 102 156 0587317 A5787.37.40 0.2913 102 156 0587324 A5787.47.50 0.2952 102 156 0279366 A5787.57.60 0.2992 109 165 0279373 A5787.67.70 0.3031 109 165 0587331 A5787.77.80 0.3070 109 165 0587348 A5787.87.90 0.3110 109 165 0587355 A5787.98.00 0.3149 109 165 0279380 A5788.08.10 0.3188 109 165 0587362 A5788.18.20 0.3228 109 165 0587379 A5788.28.30 0.3267 109 165 0587386 A5788.38.40 0.3307 109 165 0587393 A5788.48.50 0.3346 109 165 0279397 A5788.58.60 0.3385 115 175 0587409 A5788.68.70 0.3425 115 175 0587416 A5788.78.80 0.3464 115 175 0587423 A5788.88.90 0.3503 115 175 0587430 A5788.9


11.50 0.4527 150 195 0279465 A57811.5 1)

11.80 0.4646 150 195 0586914 A57811.8 1)

12.00 0.4724 160 205 0279472 A57812.0 1)

12.20 0.4803 160 205 0586921 A57812.2 1)

12.50 0.4921 160 205 0586938 A57812.5 1)

12.80 0.5039 160 205 0586945 A57812.8 1)

13.00 0.5118 160 205 0586952 A57813.0 1)

13.50 0.5314 169 214 0586969 A57813.5 1)

14.00 0.5511 169 214 0586976 A57814.0 1)

14.50 0.5708 172 220 0586983 A57814.5 1)

15.00 0.5905 172 220 0586990 A57815.0 1)

15.50 0.6102 179 227 0587003 A57815.5 1)

16.00 0.6299 179 227 0587010 A57816.0 1)

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #or e-Code

9.00 0.3543 115 175 0279403 A5789.09.10 0.3582 115 175 0587447 A5789.19.20 0.3622 115 175 0587454 A5789.29.30 0.3661 115 175 0587461 A5789.39.40 0.3700 115 175 0587478 A5789.49.50 0.3740 115 175 0279410 A5789.59.60 0.3779 121 184 0587485 A5789.69.70 0.3818 121 184 0587492 A5789.79.80 0.3858 121 184 0587508 A5789.89.90 0.3897 121 184 0587515 A5789.910.00 0.3937 139 184 0279427 A57810.0 1)

10.20 0.4015 139 184 0279434 A57810.2 1)

10.30 0.4055 139 184 0586877 A57810.3 1)

10.40 0.4094 139 184 0586884 A57810.4 1)

10.50 0.4133 139 184 0279441 A57810.5 1)

10.80 0.4251 150 195 0586891 A57810.8 1)

11.00 0.4330 150 195 0279458 A57811.0 1)

11.20 0.4409 150 195 0586907 A57811.2 1)

A578d1Øh8mm

d1decimalInch

l2mm

l1mm Stock #

EDP #or e-Code

1) Flute Lengths Longer than Standard


A916

A916

■

●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

1.00 0.0393 33 56 0146330 A9161.01.10 0.0433 37 60 0146347 A9161.11.20 0.0472 41 65 0146354 A9161.21.30 0.0511 41 65 0146361 A9161.31.40 0.0551 45 70 0146378 A9161.41.50 0.0590 45 70 0146385 A9161.5

1/16 1.59 0.0625 50 76 0171752 A9161/161.60 0.0629 50 76 0146392 A9161.61.70 0.0669 50 76 0146408 A9161.71.80 0.0708 53 80 0146415 A9161.81.90 0.0748 53 80 0146422 A9161.9

5/64 1.98 0.0779 56 85 0171769 A9165/642.00 0.0787 56 85 0146439 A9162.02.10 0.0826 56 85 0146446 A9162.12.20 0.0866 59 90 0146453 A9162.22.30 0.0905 59 90 0146460 A9162.3

3/32 2.38 0.0937 62 95 0171776 A9163/322.40 0.0944 62 95 0146477 A9162.42.50 0.0984 62 95 0146484 A9162.52.60 0.1023 62 95 0146491 A9162.62.70 0.1062 66 100 0146507 A9162.7

7/64 2.78 0.1094 66 100 0171783 A9167/642.80 0.1102 66 100 0146514 A9162.82.90 0.1141 66 100 0146521 A9162.93.00 0.1181 66 100 0146538 A9163.03.10 0.1220 69 106 0146545 A9163.1

1/8 3.18 0.1251 69 106 0171790 A9161/83.20 0.1259 69 106 0146552 A9163.23.30 0.1299 69 106 0146569 A9163.33.40 0.1338 73 112 0146576 A9163.43.50 0.1377 73 112 0146583 A9163.5

9/64 3.57 0.1405 73 112 0171806 A9169/643.60 0.1417 73 112 0146590 A9163.63.70 0.1456 73 112 0146606 A9163.73.80 0.1496 78 119 0146613 A9163.83.90 0.1535 78 119 0146620 A9163.9

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

5/32 3.97 0.1562 78 119 0171813 A9165/324.00 0.1574 78 119 0146637 A9164.04.10 0.1614 78 119 0146644 A9164.14.20 0.1653 78 119 0146651 A9164.24.30 0.1692 82 126 0146668 A9164.3

11/64 4.37 0.1720 82 126 0171820 A91611/644.40 0.1732 82 126 0146675 A9164.44.50 0.1771 82 126 0146682 A9164.54.60 0.1811 82 126 0146699 A9164.64.70 0.1850 82 126 0146705 A9164.7

3/16 4.76 0.1874 87 132 0171837 A9163/164.80 0.1889 87 132 0146712 A9164.84.90 0.1929 87 132 0146729 A9164.95.00 0.1968 87 132 0146736 A9165.05.10 0.2007 87 132 0146743 A9165.1

13/64 5.16 0.2031 87 132 0171844 A91613/645.20 0.2047 87 132 0146750 A9165.25.30 0.2086 87 132 0146767 A9165.35.40 0.2125 91 139 0146774 A9165.45.50 0.2165 91 139 0146781 A9165.5

7/32 5.56 0.2188 91 139 0171851 A9167/325.60 0.2204 91 139 0146798 A9165.65.70 0.2244 91 139 0146804 A9165.75.80 0.2283 91 139 0146811 A9165.85.90 0.2322 91 139 0146828 A9165.9

15/64 5.95 0.2342 91 139 0171868 A91615/646.00 0.2362 91 139 0146835 A9166.06.10 0.2401 97 148 0146842 A9166.16.20 0.2440 97 148 0146859 A9166.26.30 0.2480 97 148 0146866 A9166.3

1/4 6.35 0.2500 97 148 0171875 A9161/46.40 0.2519 97 148 0146873 A9166.46.50 0.2559 97 148 0146880 A9166.56.60 0.2598 97 148 0146897 A9166.66.70 0.2637 97 148 0146903 A9166.7

17/64 6.75 0.2657 102 156 0171882 A91617/64


● Foret PFXsérie longue● PFX long series drill ● Broca PFX - serie larga

A916

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

6.80 0.2677 102 156 0146910 A9166.86.90 0.2716 102 156 0146927 A9166.97.00 0.2755 102 156 0146934 A9167.07.10 0.2795 102 156 0146941 A9167.1

9/32 7.14 0.2811 102 156 0171899 A9169/327.20 0.2834 102 156 0146958 A9167.27.30 0.2874 102 156 0146965 A9167.37.40 0.2913 102 156 0146972 A9167.47.50 0.2952 102 156 0146989 A9167.5

19/64 7.54 0.2968 109 165 0171905 A91619/647.60 0.2992 109 165 0146996 A9167.67.70 0.3031 109 165 0147009 A9167.77.80 0.3070 109 165 0147016 A9167.87.90 0.3110 109 165 0147023 A9167.9

5/16 7.94 0.3125 109 165 0171912 A9165/168.00 0.3149 109 165 0147030 A9168.08.10 0.3188 109 165 0147047 A9168.18.20 0.3228 109 165 0147061 A9168.28.30 0.3267 109 165 0147078 A9168.3

21/64 8.33 0.3279 109 165 0171929 A91621/648.40 0.3307 109 165 0147085 A9168.48.50 0.3346 109 165 0147092 A9168.58.60 0.3385 115 175 0147108 A9168.68.70 0.3425 115 175 0147115 A9168.7

11/32 8.73 0.3437 115 175 0171936 A91611/328.80 0.3464 115 175 0147122 A9168.88.90 0.3503 115 175 0147139 A9168.99.00 0.3543 115 175 0147146 A9169.09.10 0.3582 115 175 0147153 A9169.1

23/64 9.13 0.3594 115 175 0171943 A91623/649.20 0.3622 115 175 0147160 A9169.29.30 0.3661 115 175 0147177 A9169.39.40 0.3700 115 175 0147184 A9169.49.50 0.3740 115 175 0147191 A9169.5

3/8 9.53 0.3751 139 184 0171950 A9163/8 1)

9.60 0.3779 139 184 0147207 A9169.6 1)

9.70 0.3818 139 184 0147214 A9169.7 1)

9.80 0.3858 139 184 0147221 A9169.8 1)

9.90 0.3897 139 184 0147238 A9169.9 1)

25/64 9.92 0.3905 139 184 0171967 A91625/64 1)

10.00 0.3937 139 184 0147245 A91610.0 1)

10.20 0.4015 139 184 0147252 A91610.2 1)

10.30 0.4055 139 184 0171974 A91610.3 1)

13/32 10.32 0.4062 139 184 0171981 A91613/32 1)

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2mm

l1mm Stock #

EDP #ore-Code

10.40 0.4094 139 184 0171998 A91610.4 1)

10.50 0.4133 139 184 0147269 A91610.5 1)

27/64 10.72 0.4220 150 195 0172001 A91627/64 1)

10.80 0.4251 150 195 0147276 A91610.8 1)

11.00 0.4330 150 195 0147283 A91611.0 1)

7/16 11.11 0.4374 150 195 0172018 A9167/16 1)

11.20 0.4409 150 195 0147290 A91611.2 1)

11.50 0.4527 150 195 0147306 A91611.5 1)

29/64 11.51 0.4531 150 195 0172025 A91629/64 1)

11.80 0.4645 150 195 0147313 A91611.8 1)

15/32 11.91 0.4688 160 205 0172032 A91615/32 1)

12.00 0.4724 160 205 0147320 A91612.0 1)

12.20 0.4803 160 205 0147337 A91612.2 1)

31/64 12.30 0.4842 160 205 0172049 A91631/64 1)

12.50 0.4921 160 205 0147344 A91612.5 1)

1/2 12.70 0.5000 160 205 0172056 A9161/2 1)

12.80 0.5039 160 205 0147351 A91612.8 1)

13.00 0.5118 160 205 0147368 A91613.0 1)

33/64 13.10 0.5156 160 205 0588376 A91633/64 1)

17/32 13.49 0.5312 169 214 0588291 A91617/32 1)

13.50 0.5314 169 214 0588208 A91613.5 1)

14.00 0.5511 169 214 0588215 A91614.0 1)

9/16 14.29 0.5625 172 220 0588420 A9169/16 1)

14.50 0.5708 172 220 0588222 A91614.5 1)

37/64 14.68 0.5781 172 220 0588383 A91637/64 1)

15.00 0.5905 172 220 0588239 A91615.0 1)

19/32 15.08 0.5938 179 227 0588321 A91619/32 1)

15.50 0.6102 179 227 0588246 A91615.5 1)

5/8 15.88 0.6250 179 255 0588413 A9165/8 1)

16.00 0.6299 179 227 0588253 A91616.0 1)

16.50 0.6496 188 235 0588260 A91616.5 1)

21/32 16.67 0.6562 188 235 0588345 A91621/32 1)

17.00 0.6693 188 235 0588277 A91617.0 1)

11/16 17.46 0.6875 195 241 0588192 A91611/16 1)

17.50 0.6890 195 241 0588284 A91617.5 1)

45/64 17.86 0.7031 195 241 0588390 A91645/64 1)

18.00 0.7087 195 257 0588307 A91618.0 1)

2)

23/32 18.27 0.7188 210 257 0588352 A91623/32 1)

2)

47/64 18.65 0.7344 210 257 0588406 A91647/64 1)

2)

19.00 0.7480 210 264 0588314 A91619.0 1)

2)

3/4 19.05 0.75 215 264 0588369 A9163/4 1)

2)

20.00 0.7874 220 264 0588338 A91620.0 1)

2)

1) Flute Lengths Longer than Standard2) Overall Lengths Longer than Standard


5/16 0.3125 4“ 6.3/8 05782021/64 0.3281 4.1/8 6.1/2 05782111/32 0.3438 4.1/8 6.1/2 05782223/64 0.3594 4.1/4 6.3/4 0578233/8 0.3750 4.1/4 6.3/4 05782425/64 0.3906 4.3/8 7“ 05782513/32 0.4062 4.3/8 7“ 05782627/64 0.4219 4.5/8 7.1/4 0578277/16 0.4375 4.5/8 7.1/4 05782829/64 0.4531 4.3/4 7.1/2 05782915/32 0.4688 4.3/4 7.1/2 05783031/64 0.4844 4.3/4 7.3/4 0578311/2 0.5000 4.3/4 7.3/4 057832

QC91CO

QC91CO

■●

d1ØInch

d1dec.Inch

l2Inch

l1 Inch

EDP #ore-Code

1/16 0.0625 1.3/4 3“ 05780452 0.0635 2“ 3.3/4 05395251 0.0670 2“ 3.3/4 05395150 0.0700 2“ 3.3/4 05395049 0.0730 2“ 3.3/4 05394948 0.0760 2“ 3.3/4 0539485/64 0.0781 2“ 3.3/4 05780547 0.0785 2.1/4 4.1/4 05394746 0.0810 2.1/4 4.1/4 05394645 0.0820 2.1/4 4.1/4 05394544 0.0860 2.1/4 4.1/4 05394443 0.0890 2.1/4 4.1/4 05394342 0.0935 2.1/4 4.1/4 0539423/32 0.0938 2.1/4 4.1/4 05780641 0.0960 2.1/2 4.5/8 05394140 0.0980 2.1/2 4.5/8 05394039 0.0995 2.1/2 4.5/8 05393938 0.1015 2.1/2 4.5/8 05393837 0.1040 2.1/2 4.5/8 05393736 0.1065 2.1/2 4.5/8 0539367/64 0.1094 2.1/2 4.5/8 05780735 0.1100 2.3/4 5.1/8 05393534 0.1110 2.3/4 5.1/8 05393433 0.1130 2.3/4 5.1/8 05393332 0.1160 2.3/4 5.1/8 05393231 0.1200 2.3/4 5.1/8 0539311/8 0.1250 2.3/4 5.1/8 05780830 0.1285 3“ 5.3/8 05393029 0.1360 3“ 5.3/8 05392928 0.1405 3“ 5.3/8 0539289/64 0.1406 3“ 5.3/8 05780927 0.1440 3“ 5.3/8 05392726 0.1470 3“ 5.3/8 05392625 0.1495 3“ 5.3/8 05392524 0.1520 3“ 5.3/8 05392423 0.1540 3“ 5.3/8 0539235/32 0.1562 3“ 5.3/8 05781022 0.1570 3.3/8 5.3/4 05392221 0.1590 3.3/8 5.3/4 05392120 0.1610 3.3/8 5.3/4 05392019 0.1660 3.3/8 5.3/4 05391918 0.1695 3.3/8 5.3/4 053918

d1ØInch

d1dec.Inch

l2Inch

l1 Inch

EDP #ore-Code

11/64 0.1719 3.3/8 5.3/4 05781117 0.1730 3.3/8 5.3/4 05391716 0.1770 3.3/8 5.3/4 05391615 0.1800 3.3/8 5.3/4 05391514 0.1820 3.3/8 5.3/4 05391413 0.1850 3.3/8 5.3/4 0539133/16 0.1875 3.3/8 5.3/4 05781212 0.1890 3.5/8 6“ 05391211 0.1910 3.5/8 6“ 05391110 0.1935 3.5/8 6“ 0539109 0.1960 3.5/8 6“ 0539098 0.1990 3.5/8 6“ 0539087 0.2010 3.5/8 6“ 05390713/64 0.2031 3.5/8 6“ 0578136 0.2040 3.5/8 6“ 0539065 0.2055 3.5/8 6“ 0539054 0.2090 3.5/8 6“ 0539043 0.2130 3.5/8 6“ 0539037/32 0.2188 3.5/8 6“ 0578142 0.2210 3.3/4 6.1/8 0539021 0.2280 3.3/4 6.1/8 05390115/64 0.2344 3.3/4 6.1/8 0578151/4 0.2500 3.3/4 6.1/8 05781617/64 0.2656 3.7/8 6.1/4 0578179/32 0.2812 3.7/8 6.1/4 05781819/64 0.2969 4“ 6.3/8 057819


● Foret serie longue ● Taper length drill● Wide-land parabolic flute

● Broca de mango conico- Serie Larga

QC91COM

QC91COM

■

●

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

1.50 0.0591 45 70 0504152.00 0.0787 56 85 0504202.50 0.0984 62 95 0504253.00 0.1181 66 100 0504303.50 0.1378 73 112 0504354.00 0.1575 78 119 0504404.50 0.1772 82 126 0504455.00 0.1969 87 132 0504505.20 0.2047 87 132 0504525.50 0.2165 91 139 0504555.60 0.2205 91 139 0504566.00 0.2362 91 139 0504606.50 0.2559 97 148 0504656.80 0.2677 102 156 0504687.00 0.2756 102 156 0504707.50 0.2953 102 156 050475

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

8.00 0.3150 109 165 0504808.20 0.3228 109 165 0504828.50 0.3346 109 165 0504858.60 0.3386 115 175 0504869.00 0.3543 115 175 0504909.50 0.3740 115 175 05049510.00 0.3937 121 184 05050010.50 0.4134 121 184 05050511.00 0.4331 128 195 05051011.50 0.4528 128 195 05051512.00 0.4724 134 205 05052012.50 0.4921 134 205 05052513.00 0.5118 134 205 050530




5/16 0.3125 4“ 6.3/8 08182021/64 0.3281 4.1/8 6.1/2 08182111/32 0.3438 4.1/8 6.1/2 08182223/64 0.3594 4.1/4 6.3/4 0818233/8 0.3750 4.1/4 6.3/4 08182425/64 0.3906 4.3/8 7“ 08182513/32 0.4062 4.3/8 7“ 08182627/64 0.4219 4.5/8 7.1/4 0818277/16 0.4375 4.5/8 7.1/4 08182829/64 0.4531 4.3/4 7.1/2 08182915/32 0.4688 4.3/4 7.1/2 08183031/64 0.4844 4.3/4 7.3/4 0818311/2 0.5000 4.3/4 7.3/4 081832

QC91V

QC91V

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 1.3/4 3“ 08180452 0.0635 2“ 3.3/4 08085251 0.0670 2“ 3.3/4 08085150 0.0700 2“ 3.3/4 08085049 0.0730 2“ 3.3/4 08084948 0.0760 2“ 3.3/4 0808485/64 0.0781 2“ 3.3/4 08180547 0.0785 2.1/4 4.1/4 08084746 0.0810 2.1/4 4.1/4 08084645 0.0820 2.1/4 4.1/4 08084544 0.0860 2.1/4 4.1/4 08084443 0.0890 2.1/4 4.1/4 08084342 0.0935 2.1/4 4.1/4 0808423/32 0.0938 2.1/4 4.1/4 08180641 0.0960 2.1/2 4.5/8 08084140 0.0980 2.1/2 4.5/8 08084039 0.0995 2.1/2 4.5/8 08083938 0.1015 2.1/2 4.5/8 08083837 0.1040 2.1/2 4.5/8 08083736 0.1065 2.1/2 4.5/8 0808367/64 0.1094 2.1/2 4.5/8 08180735 0.1100 2.3/4 5.1/8 08083534 0.1110 2.3/4 5.1/8 08083433 0.1130 2.3/4 5.1/8 08083332 0.1160 2.3/4 5.1/8 08083231 0.1200 2.3/4 5.1/8 0808311/8 0.1250 2.3/4 5.1/8 08180830 0.1285 3“ 5.3/8 08083029 0.1360 3“ 5.3/8 08082928 0.1405 3“ 5.3/8 0808289/64 0.1406 3“ 5.3/8 08180927 0.1440 3“ 5.3/8 08082726 0.1470 3“ 5.3/8 08082625 0.1495 3“ 5.3/8 08082524 0.1520 3“ 5.3/8 08082423 0.1540 3“ 5.3/8 0808235/32 0.1562 3“ 5.3/8 08181022 0.1570 3.3/8 5.3/4 08082221 0.1590 3.3/8 5.3/4 08082120 0.1610 3.3/8 5.3/4 08082019 0.1660 3.3/8 5.3/4 08081918 0.1695 3.3/8 5.3/4 080818

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

11/64 0.1719 3.3/8 5.3/4 08181117 0.1730 3.3/8 5.3/4 08081716 0.1770 3.3/8 5.3/4 08081615 0.1800 3.3/8 5.3/4 08081514 0.1820 3.3/8 5.3/4 08081413 0.1850 3.3/8 5.3/4 0808133/16 0.1875 3.3/8 5.3/4 08181212 0.1890 3.5/8 6“ 08081211 0.1910 3.5/8 6“ 08081110 0.1935 3.5/8 6“ 0808109 0.1960 3.5/8 6“ 0808098 0.1990 3.5/8 6“ 0808087 0.2010 3.5/8 6“ 08080713/64 0.2031 3.5/8 6“ 0818136 0.2040 3.5/8 6“ 0808065 0.2055 3.5/8 6“ 0808054 0.2090 3.5/8 6“ 0808043 0.2130 3.5/8 6“ 0808037/32 0.2188 3.5/8 6“ 0818142 0.2210 3.3/4 6.1/8 0808021 0.2280 3.3/4 6.1/8 08080115/64 0.2344 3.3/4 6.1/8 0818151/4 0.2500 3.3/4 6.1/8 08181617/64 0.2656 3.7/8 6.1/4 0818179/32 0.2812 3.7/8 6.1/4 08181819/64 0.2969 4“ 6.3/8 081819




QC91G

d1Ø Inch

d1 dec.Inch

l2 Inch

l1 Inch

EDP # or e-Code

1/16 0.0625 1.3/4 3“ 05590452 0.0635 2“ 3.3/4 05095251 0.0670 2“ 3.3/4 05095150 0.0700 2“ 3.3/4 05095049 0.0730 2“ 3.3/4 05094948 0.0760 2“ 3.3/4 0509485/64 0.0781 2“ 3.3/4 05590547 0.0785 2.1/4 4.1/4 05094746 0.0810 2.1/4 4.1/4 05094645 0.0820 2.1/4 4.1/4 05094544 0.0860 2.1/4 4.1/4 05094443 0.0890 2.1/4 4.1/4 05094342 0.0935 2.1/4 4.1/4 0509423/32 0.0938 2.1/4 4.1/4 05590641 0.0960 2.1/2 4.5/8 05094140 0.0980 2.1/2 4.5/8 05094039 0.0995 2.1/2 4.5/8 05093938 0.1015 2.1/2 4.5/8 05093837 0.1040 2.1/2 4.5/8 05093736 0.1065 2.1/2 4.5/8 0509367/64 0.1094 2.1/2 4.5/8 05590735 0.1100 2.3/4 5.1/8 05093534 0.1110 2.3/4 5.1/8 05093433 0.1130 2.3/4 5.1/8 05093332 0.1160 2.3/4 5.1/8 05093231 0.1200 2.3/4 5.1/8 0509311/8 0.1250 2.3/4 5.1/8 05590830 0.1285 3“ 5.3/8 05093029 0.1360 3“ 5.3/8 05092928 0.1405 3“ 5.3/8 0509289/64 0.1406 3“ 5.3/8 05590927 0.1440 3“ 5.3/8 05092726 0.1470 3“ 5.3/8 05092625 0.1495 3“ 5.3/8 05092524 0.1520 3“ 5.3/8 05092423 0.1540 3“ 5.3/8 0509235/32 0.1562 3“ 5.3/8 05591022 0.1570 3.3/8 5.3/4 05092221 0.1590 3.3/8 5.3/4 05092120 0.1610 3.3/8 5.3/4 050920

d1Ø Inch

d1 dec.Inch

l2 Inch

l1 Inch

EDP # or e-Code

19 0.1660 3.3/8 5.3/4 05091918 0.1695 3.3/8 5.3/4 05091811/64 0.1719 3.3/8 5.3/4 05591117 0.1730 3.3/8 5.3/4 05091716 0.1770 3.3/8 5.3/4 05091615 0.1800 3.3/8 5.3/4 05091514 0.1820 3.3/8 5.3/4 05091413 0.1850 3.3/8 5.3/4 0509133/16 0.1875 3.3/8 5.3/4 05591212 0.1890 3.5/8 6“ 05091211 0.1910 3.5/8 6“ 05091110 0.1935 3.5/8 6“ 0509109 0.1960 3.5/8 6“ 0509098 0.1990 3.5/8 6“ 0509087 0.2010 3.5/8 6“ 05090713/64 0.2031 3.5/8 6“ 0559136 0.2040 3.5/8 6“ 0509065 0.2055 3.5/8 6“ 0509054 0.2090 3.5/8 6“ 0509043 0.2130 3.5/8 6“ 0509037/32 0.2188 3.5/8 6“ 0559142 0.2210 3.3/4 6.1/8 0509021 0.2280 3.3/4 6.1/8 05090115/64 0.2344 3.3/4 6.1/8 0559151/4 0.2500 3.3/4 6.1/8 05591617/64 0.2656 3.7/8 6.1/4 0559179/32 0.2812 3.7/8 6.1/4 05591819/64 0.2969 4“ 6.3/8 055919

QC91G

■

●


5/16 0.3125 4“ 6.3/8 05592021/64 0.3281 4.1/8 6.1/2 05592111/32 0.3438 4.1/8 6.1/2 05592223/64 0.3594 4.1/4 6.3/4 0559233/8 0.3750 4.1/4 6.3/4 05592425/64 0.3906 4.3/8 7“ 05592513/32 0.4062 4.3/8 7“ 05592627/64 0.4219 4.5/8 7.1/4 0559277/16 0.4375 4.5/8 7.1/4 05592829/64 0.4531 4.3/4 7.1/2 05592915/32 0.4688 4.3/4 7.1/2 05593031/64 0.4844 4.3/4 7.3/4 0559311/2 0.5000 4.3/4 7.3/4 055932



QC91

QC91

■ ●

5/16 0.3125 4“ 6.3/8 05582021/64 0.3281 4.1/8 6.1/2 05582111/32 0.3438 4.1/8 6.1/2 05582223/64 0.3594 4.1/4 6.3/4 0558233/8 0.3750 4.1/4 6.3/4 05582425/64 0.3906 4.3/8 7“ 05582513/32 0.4062 4.3/8 7“ 05582627/64 0.4219 4.5/8 7.1/4 0558277/16 0.4375 4.5/8 7.1/4 05582829/64 0.4531 4.3/4 7.1/2 05582915/32 0.4688 4.3/4 7.1/2 05583031/64 0.4844 4.3/4 7.3/4 0558311/2 0.5000 4.3/4 7.3/4 055832

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 1.3/4 3“ 05580452 0.0635 2“ 3.3/4 05085251 0.0670 2“ 3.3/4 05085150 0.0700 2“ 3.3/4 05085049 0.0730 2“ 3.3/4 05084948 0.0760 2“ 3.3/4 0508485/64 0.0781 2“ 3.3/4 05580547 0.0785 2.1/4 4.1/4 05084746 0.0810 2.1/4 4.1/4 05084645 0.0820 2.1/4 4.1/4 05084544 0.0860 2.1/4 4.1/4 05084443 0.0890 2.1/4 4.1/4 05084342 0.0935 2.1/4 4.1/4 0508423/32 0.0938 2.1/4 4.1/4 05580641 0.0960 2.1/2 4.5/8 05084140 0.0980 2.1/2 4.5/8 05084039 0.0995 2.1/2 4.5/8 05083938 0.1015 2.1/2 4.5/8 05083837 0.1040 2.1/2 4.5/8 05083736 0.1065 2.1/2 4.5/8 0508367/64 0.1094 2.1/2 4.5/8 05580735 0.1100 2.3/4 5.1/8 05083534 0.1110 2.3/4 5.1/8 05083433 0.1130 2.3/4 5.1/8 05083332 0.1160 2.3/4 5.1/8 05083231 0.1200 2.3/4 5.1/8 0508311/8 0.1250 2.3/4 5.1/8 05580830 0.1285 3“ 5.3/8 05083029 0.1360 3“ 5.3/8 05082928 0.1405 3“ 5.3/8 0508289/64 0.1406 3“ 5.3/8 05580927 0.1440 3“ 5.3/8 05082726 0.1470 3“ 5.3/8 05082625 0.1495 3“ 5.3/8 05082524 0.1520 3“ 5.3/8 05082423 0.1540 3“ 5.3/8 0508235/32 0.1562 3“ 5.3/8 05581022 0.1570 3.3/8 5.3/4 05082221 0.1590 3.3/8 5.3/4 05082120 0.1610 3.3/8 5.3/4 05082019 0.1660 3.3/8 5.3/4 05081918 0.1695 3.3/8 5.3/4 050818

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

11/64 0.1719 3.3/8 5.3/4 05581117 0.1730 3.3/8 5.3/4 05081716 0.1770 3.3/8 5.3/4 05081615 0.1800 3.3/8 5.3/4 05081514 0.1820 3.3/8 5.3/4 05081413 0.1850 3.3/8 5.3/4 0508133/16 0.1875 3.3/8 5.3/4 05581212 0.1890 3.5/8 6“ 05081211 0.1910 3.5/8 6“ 05081110 0.1935 3.5/8 6“ 0508109 0.1960 3.5/8 6“ 0508098 0.1990 3.5/8 6“ 0508087 0.2010 3.5/8 6“ 05080713/64 0.2031 3.5/8 6“ 0558136 0.2040 3.5/8 6“ 0508065 0.2055 3.5/8 6“ 0508054 0.2090 3.5/8 6“ 0508043 0.2130 3.5/8 6“ 0508037/32 0.2188 3.5/8 6“ 0558142 0.2210 3.3/4 6.1/8 0508021 0.2280 3.3/4 6.1/8 05080115/64 0.2344 3.3/4 6.1/8 0558151/4 0.2500 3.3/4 6.1/8 05581617/64 0.2656 3.7/8 6.1/4 0558179/32 0.2812 3.7/8 6.1/4 05581819/64 0.2969 4“ 6.3/8 055819




QC91P

QC91P

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 1.3/4 3“ 05790452 0.0635 2“ 3.3/4 05945251 0.0670 2“ 3.3/4 05945150 0.0700 2“ 3.3/4 05945049 0.0730 2“ 3.3/4 05944948 0.0760 2“ 3.3/4 0594485/64 0.0781 2“ 3.3/4 05790547 0.0785 2.1/4 4.1/4 05944746 0.0810 2.1/4 4.1/4 05944645 0.0820 2.1/4 4.1/4 05944544 0.0860 2.1/4 4.1/4 05944443 0.0890 2.1/4 4.1/4 05944342 0.0935 2.1/4 4.1/4 0594423/32 0.0938 2.1/4 4.1/4 05790641 0.0960 2.1/2 4.5/8 05944140 0.0980 2.1/2 4.5/8 05944039 0.0995 2.1/2 4.5/8 05943938 0.1015 2.1/2 4.5/8 05943837 0.1040 2.1/2 4.5/8 05943736 0.1065 2.1/2 4.5/8 0594367/64 0.1094 2.1/2 4.5/8 05790735 0.1100 2.3/4 5.1/8 05943534 0.1110 2.3/4 5.1/8 05943433 0.1130 2.3/4 5.1/8 05943332 0.1160 2.3/4 5.1/8 05943231 0.1200 2.3/4 5.1/8 0594311/8 0.1250 2.3/4 5.1/8 05790830 0.1285 3“ 5.3/8 05943029 0.1360 3“ 5.3/8 05942928 0.1405 3“ 5.3/8 0594289/64 0.1406 3“ 5.3/8 05790927 0.1440 3“ 5.3/8 05942726 0.1470 3“ 5.3/8 05942625 0.1495 3“ 5.3/8 059425

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

24 0.1520 3“ 5.3/8 05942423 0.1540 3“ 5.3/8 0594235/32 0.1562 3“ 5.3/8 05791022 0.1570 3.3/8 5.3/4 05942221 0.1590 3.3/8 5.3/4 05942120 0.1610 3.3/8 5.3/4 05942019 0.1660 3.3/8 5.3/4 05941918 0.1695 3.3/8 5.3/4 05941811/64 0.1719 3.3/8 5.3/4 05791117 0.1730 3.3/8 5.3/4 05941716 0.1770 3.3/8 5.3/4 05941615 0.1800 3.3/8 5.3/4 05941514 0.1820 3.3/8 5.3/4 05941413 0.1850 3.3/8 5.3/4 0594133/16 0.1875 3.3/8 5.3/4 05791212 0.1890 3.5/8 6“ 05941211 0.1910 3.5/8 6“ 05941110 0.1935 3.5/8 6“ 0594109 0.1960 3.5/8 6“ 0594098 0.1990 3.5/8 6“ 0594087 0.2010 3.5/8 6“ 05940713/64 0.2031 3.5/8 6“ 0579136 0.2040 3.5/8 6“ 0594065 0.2055 3.5/8 6“ 0594054 0.2090 3.5/8 6“ 0594043 0.2130 3.5/8 6“ 0594037/32 0.2188 3.5/8 6“ 0579142 0.2210 3.3/4 6.1/8 0594021 0.2280 3.3/4 6.1/8 05940115/64 0.2344 3.3/4 6.1/8 0579151/4 0.2500 3.3/4 6.1/8 05791617/64 0.2656 3.7/8 6.1/4 0579179/32 0.2812 3.7/8 6.1/4 05791819/64 0.2969 4“ 6.3/8 057919




QC91Pd1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

5/16 0.3125 4“ 6.3/8 05792021/64 0.3281 4.1/8 6.1/2 05792111/32 0.3438 4.1/8 6.1/2 05792223/64 0.3594 4.1/4 6.3/4 0579233/8 0.3750 4.1/4 6.3/4 05792425/64 0.3906 4.3/8 7“ 05792513/32 0.4062 4.3/8 7“ 05792627/64 0.4219 4.5/8 7.1/4 0579277/16 0.4375 4.5/8 7.1/4 05792829/64 0.4531 4.3/4 7.1/2 05792915/32 0.4688 4.3/4 7.1/2 05793031/64 0.4844 4.3/4 7.3/4 057931

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/2 0.5000 4.3/4 7.3/4 05793233/64 0.5156 4.3/4 8“ 05793317/32 0.5312 4.3/4 8“ 05793435/64 0.5469 4.7/8 8.1/4 0579359/16 0.5625 4.7/8 8.1/4 05793637/64 0.5781 4.7/8 8.3/4 05793719/32 0.5938 4.7/8 8.3/4 05793839/64 0.6094 4.7/8 8.3/4 0579395/8 0.6250 4.7/8 8.3/4 05794041/64 0.6406 5.1/8 9“ 05794121/32 0.6562 5.1/8 9“ 05794243/64 0.6719 5.3/8 9.1/4 05794311/16 0.6875 5.3/8 9.1/4 057944

QC91GM● Foret serie longue ● Taper length drill

● Wide-land parabolic flute● Broca de mango conico- Serie Larga


QC91GM

■ ●

d1Ø mm

d1 dec.Inch

l2mm

l1mm

EDP #ore-Code

1.50 0.0591 45 70 0502152.00 0.0787 56 85 0502202.50 0.0984 62 95 0502253.00 0.1181 66 100 0502303.50 0.1378 73 112 0502354.00 0.1575 78 119 0502404.50 0.1772 82 126 0502455.00 0.1969 87 132 0502505.20 0.2047 87 132 0502525.50 0.2165 91 139 0502555.60 0.2205 91 139 0502566.00 0.2362 91 139 0502606.50 0.2559 97 148 0502656.80 0.2677 102 156 050268

d1Ø mm

d1 dec.Inch

l2mm

l1mm

EDP #ore-Code

7.00 0.2756 102 156 0502707.50 0.2953 102 156 0502758.00 0.3150 109 165 0502808.20 0.3228 109 165 0502828.50 0.3346 109 165 0502858.60 0.3386 115 175 0502869.00 0.3543 115 175 0502909.50 0.3740 115 175 05029510.00 0.3937 121 184 05030010.50 0.4134 121 184 05030511.00 0.4331 128 195 05031011.50 0.4528 128 195 05031512.00 0.4724 134 205 05032012.50 0.4921 134 205 05032513.00 0.5118 134 205 050330

QC91M

QC91M

■

●

d1Ø mm

d1 dec.Inch

l2 mm

l1 mm

EDP #ore-Code

1.50 0.0591 45 70 0506152.00 0.0787 56 85 0506202.50 0.0984 62 95 0506253.00 0.1181 66 100 0506303.50 0.1378 73 112 0506354.00 0.1575 78 119 0506404.50 0.1772 82 126 0506455.00 0.1969 87 132 0506505.20 0.2047 87 132 0506525.50 0.2165 91 139 0506555.60 0.2205 91 139 0506566.00 0.2362 91 139 0506606.50 0.2559 97 148 0506656.80 0.2677 102 156 050668

d1Ø mm

d1 dec.Inch

l2 mm

l1 mm

EDP #ore-Code

7.00 0.2756 102 156 0506707.50 0.2953 102 156 0506758.00 0.3150 109 165 0506808.20 0.3228 109 165 0506828.50 0.3346 109 165 0506858.60 0.3386 115 175 0506869.00 0.3543 115 175 0506909.50 0.3740 115 175 05069510.00 0.3937 121 184 05070010.50 0.4134 121 184 05070511.00 0.4331 128 195 05071011.50 0.4528 128 195 05071512.00 0.4724 134 205 05072012.50 0.4921 134 205 05072513.00 0.5118 134 205 050730




QC91PM

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

1.50 0.0591 45 70 0500152.00 0.0787 56 85 0500202.50 0.0984 62 95 0500253.00 0.1181 66 100 0500303.50 0.1378 73 112 0500354.00 0.1575 78 119 0500404.50 0.1772 82 126 0500455.00 0.1969 87 132 0500505.20 0.2047 87 132 0500525.50 0.2165 91 139 0500555.60 0.2205 91 139 0500566.00 0.2362 91 139 0500606.50 0.2559 97 148 0500656.80 0.2677 102 156 0500687.00 0.2756 102 156 0500707.50 0.2953 102 156 0500758.00 0.3150 109 165 0500808.20 0.3228 109 165 0500828.50 0.3346 109 165 0500858.60 0.3386 115 175 050086

d1Ømm

d1dec.Inch

l2mm

l1mm

EDP #ore-Code

9.00 0.3543 115 175 0500909.50 0.3740 115 175 05009510.00 0.3937 121 184 05010010.50 0.4134 121 184 05010511.00 0.4331 128 195 05011011.50 0.4528 128 195 05011512.00 0.4724 134 205 05012012.50 0.4921 134 205 05012513.00 0.5118 134 205 05013013.50 0.5315 140 214 05013514.00 0.5512 140 214 05014014.50 0.5709 144 220 05014515.00 0.5906 144 220 05015015.50 0.6102 149 227 05015516.00 0.6299 149 227 05016016.50 0.6496 154 235 05016517.00 0.6693 154 235 05017017.50 0.6890 158 241 050175

●

■

QC91PM




M51CO

M51CO

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 1.3/4 3“ 0513045/64 0.0781 2“ 3.3/4 0513053/32 0.0938 2.1/4 4.1/4 0513067/64 0.1094 2.1/2 4.5/8 0513071/8 0.1250 2.3/4 5.1/8 0513089/64 0.1406 3“ 5.3/8 0513095/32 0.1562 3“ 5.3/8 05131011/64 0.1719 3.3/8 5.3/4 0513113/16 0.1875 3.3/8 5.3/4 05131213/64 0.2031 3.5/8 6“ 0513137/32 0.2188 3.5/8 6“ 05131415/64 0.2344 3.3/4 6.1/8 0513151/4 0.2500 3.3/4 6.1/8 05131617/64 0.2656 3.7/8 6.1/4 0513179/32 0.2812 3.7/8 6.1/4 05131819/64 0.2969 4“ 6.3/8 0513195/16 0.3125 4“ 6.3/8 05132021/64 0.3281 4.1/8 6.1/2 05132111/32 0.3438 4.1/8 6.1/2 05132223/64 0.3594 4.1/4 6.3/4 0513233/8 0.3750 4.1/4 6.3/4 05132425/64 0.3906 4.3/8 7“ 05132513/32 0.4062 4.3/8 7“ 05132627/64 0.4219 4.5/8 7.1/4 0513277/16 0.4375 4.5/8 7.1/4 05132829/64 0.4531 4.3/4 7.1/2 05132915/32 0.4688 4.3/4 7.1/2 05133031/64 0.4844 4.3/4 7.3/4 0513311/2 0.5000 4.3/4 7.3/4 05133233/64 0.5156 4.3/4 8“ 051333 1)

17/32 0.5312 4.3/4 8“ 051334 1)

35/64 0.5469 4.7/8 8.1/4 051335 1)

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/16 0.5625 4.7/8 8.1/4 051336 1)

37/64 0.5781 4.7/8 8.3/4 051337 1)

19/32 0.5938 4.7/8 8.3/4 051338 1)

39/64 0.6094 4.7/8 8.3/4 051339 1)

5/8 0.6250 4.7/8 8.3/4 051340 1)

41/64 0.6406 5.1/8 9“ 051341 1)

21/32 0.6562 5.1/8 9“ 051342 1)

43/64 0.6719 5.3/8 9.1/4 051343 1)

11/16 0.6875 5.3/8 9.1/4 051344 1)

45/64 0.7031 5.5/8 9.1/2 051345 1)

23/32 0.7188 5.5/8 9.1/2 051346 1)

47/64 0.7344 5.7/8 9.3/4 051347 1)

3/4 0.7500 5.7/8 9.3/4 051348 1)

49/64 0.7656 6“ 9.7/8 051349 1)

25/32 0.7812 6“ 9.7/8 051350 1)

51/64 0.7969 6.1/8 10“ 051351 1)

13/16 0.8125 6.1/8 10“ 051352 1)

53/64 0.8281 6.1/8 10“ 051353 1)

27/32 0.8438 6.1/8 10“ 051354 1)

55/64 0.8594 6.1/8 10“ 051355 1)

7/8 0.8750 6.1/8 10“ 051356 1)

57/64 0.8906 6.1/8 10“ 051357 1)

29/32 0.9062 6.1/8 10“ 051358 1)

59/64 0.9219 6.1/8 10.3/4 051359 1)

15/16 0.9375 6.1/8 10.3/4 051360 1)

61/64 0.9531 6.3/8 11“ 051361 1)

31/32 0.9688 6.3/8 11“ 051362 1)

63/64 0.9844 6.3/8 11“ 051363 1)

1“ 1.0000 6.3/8 11“ 051364 1)

● Foret serie longue ● Taper length drill ● Broca de mango conico- Serie Larga


1) 33/64” - 1” Notched Point

M52CO

M52CO

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

40 0.0980 2.1/2 4.5/8 05234039 0.0995 2.1/2 4.5/8 05233936 0.1065 2.1/2 4.5/8 05233635 0.1100 2.3/4 5.1/8 05233534 0.1110 2.3/4 5.1/8 05233433 0.1130 2.3/4 5.1/8 05233332 0.1160 2.3/4 5.1/8 05233231 0.1200 2.3/4 5.1/8 05233130 0.1285 3“ 5.3/8 05233029 0.1360 3“ 5.3/8 05232928 0.1405 3“ 5.3/8 05232827 0.1440 3“ 5.3/8 05232726 0.1470 3“ 5.3/8 05232625 0.1495 3“ 5.3/8 05232524 0.1520 3“ 5.3/8 05232422 0.1570 3.3/8 5.3/4 05232221 0.1590 3.3/8 5.3/4 05232120 0.1610 3.3/8 5.3/4 052320

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

19 0.1660 3.3/8 5.3/4 05231918 0.1695 3.3/8 5.3/4 05231817 0.1730 3.3/8 5.3/4 05231716 0.1770 3.3/8 5.3/4 05231615 0.1800 3.3/8 5.3/4 05231514 0.1820 3.3/8 5.3/4 05231413 0.1850 3.3/8 5.3/4 05231312 0.1890 3.5/8 6“ 05231211 0.1910 3.5/8 6“ 05231110 0.1935 3.5/8 6“ 0523109 0.1960 3.5/8 6“ 0523098 0.1990 3.5/8 6“ 0523087 0.2010 3.5/8 6“ 0523075 0.2055 3.5/8 6“ 0523054 0.2090 3.5/8 6“ 0523043 0.2130 3.5/8 6“ 0523032 0.2210 3.3/4 6.1/8 0523021 0.2280 3.3/4 6.1/8 052301



R53OH - R51OH

R53OH

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

3/8 0.3750 4.1/4 6.3/4 05320413/32 0.4062 4.3/8 7“ 0532067/16 0.4375 4.5/8 7.1/4 05320815/32 0.4688 4.7/8 7.1/2 0532101/2 0.5000 5“ 7.3/4 05321217/32 0.5312 5.1/4 8“ 0532149/16 0.5625 5.3/8 8.1/4 05321619/32 0.5938 5.5/8 8.1/2 0532185/8 0.6250 5.3/4 8.3/4 05322021/32 0.6562 5.7/8 9“ 053222

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

11/16 0.6875 6“ 9.1/4 05322423/32 0.7188 6.3/16 9.1/2 0532263/4 0.7500 6.3/8 9.3/4 05322825/32 0.7812 6.1/2 9.7/8 05323013/16 0.8125 6.5/8 10“ 05323227/32 0.8438 6.3/4 10.1/4 0532347/8 0.8750 7“ 10.1/2 05323629/32 0.9062 7“ 10.5/8 05323815/16 0.9375 7“ 10.3/4 05324031/32 0.9688 7.1/8 10.7/8 0532421“ 1.0000 7.3/16 11“ 053244


1.1/16 1.0625 7.3/8 11.1/4 0512481.1/8 1.1250 7.7/8 11.3/4 0512521.3/16 1.1875 8.1/8 12“ 0512561.1/4 1.2500 8.1/2 12.1/2 0512601.5/16 1.3125 9.1/4 14.1/4 051264


d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

13/16 0.8125 6.5/8 10“ 05123227/32 0.8438 6.3/4 10.1/4 0512347/8 0.8750 7“ 10.1/2 05123629/32 0.9062 7“ 10.5/8 05123815/16 0.9375 7“ 10.3/4 05124031/32 0.9688 7.1/8 10.7/8 0512421“ 1.0000 7.3/16 11“ 051244

R51OH

■ ●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

3/8 0.3750 4.1/4 6.3/4 05120413/32 0.4062 4.3/8 7“ 0512067/16 0.4375 4.5/8 7.1/4 05120815/32 0.4688 4.7/8 7.1/2 0512101/2 0.5000 5“ 7.3/4 05121217/32 0.5312 5.1/4 8“ 0512149/16 0.5625 5.3/8 8.1/4 05121619/32 0.5938 5.5/8 8.1/2 0512185/8 0.6250 5.3/4 8.3/4 05122021/32 0.6562 5.7/8 9“ 05122211/16 0.6875 6“ 9.1/4 05122423/32 0.7188 6.3/16 9.1/2 0512263/4 0.7500 6.3/8 9.3/4 05122825/32 0.7812 6.1/2 9.7/8 051230

● 34° helix

● 23° helix● Foret serie longue ● Taper length drill ● Broca de mango conico- Serie Larga

● Notched point

● Notched point



EZ51P

EZ51P

● Tanged shank● Parabolic flute

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 2“ 3“ 0524045/64 0.0781 2.1/2 3.3/4 0524053/32 0.0938 2.13/16 4.1/4 0524067/64 0.1094 3.1/8 4.5/8 0524071/8 0.1250 3.3/8 5.1/8 0524089/64 0.1406 3.5/8 5.3/8 0524095/32 0.1562 3.3/4 5.3/8 05241011/64 0.1719 4.1/8 5.3/4 0524113/16 0.1875 4.1/8 5.3/4 05241213/64 0.2031 4.3/8 6“ 0524137/32 0.2188 4.3/8 6“ 05241415/64 0.2344 4.13/16 6.1/8 0524151/4 0.2500 4.13/16 6.1/8 05241617/64 0.2656 5“ 6.1/4 052417

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 5“ 6.1/4 05241819/64 0.2969 5.1/8 6.3/8 0524195/16 0.3125 5.1/8 6.3/8 05242021/64 0.3281 5.1/4 6.1/2 05242111/32 0.3438 5.1/4 6.1/2 05242223/64 0.3594 5.3/8 6.3/4 0524233/8 0.3750 5.3/8 6.3/4 05242425/64 0.3906 5.5/8 7“ 05242513/32 0.4062 5.5/8 7“ 05242627/64 0.4219 5.11/16 7.1/4 0524277/16 0.4375 5.11/16 7.1/4 05242829/64 0.4531 5.3/4 7.1/2 05242915/32 0.4688 5.3/4 7.1/2 05243031/64 0.4844 5.3/4 7.3/4 0524311/2 0.5000 5.3/4 7.3/4 052432

1) Not tanged

1)

1) 1)

1)

● Notched point


R51K

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch

EDP #or e-Code

1/8 0.1250 3.3/8 5.1/8 0518089/64 0.1406 3.5/8 5.3/8 0518095/32 0.1562 3.3/4 5.3/8 05181011/64 0.1719 4.1/8 5.3/4 0518113/16 0.1875 4.1/8 5.3/4 05181213/64 0.2031 4.3/8 6“ 0518137/32 0.2188 4.3/8 6“ 05181415/64 0.2344 4.13/16 6.1/8 0518151/4 0.2500 4.13/16 6.1/8 05181617/64 0.2656 5“ 6.1/4 0518179/32 0.2812 5“ 6.1/4 05181819/64 0.2969 5.1/8 6.3/8 0518195/16 0.3125 5.1/8 6.3/8 05182021/64 0.3281 5.1/4 6.1/2 05182111/32 0.3438 5.1/4 6.1/2 05182223/64 0.3594 5.3/8 6.3/4 0518233/8 0.3750 5.3/8 6.3/4 05182425/64 0.3906 5.5/8 7“ 05182513/32 0.4062 5.5/8 7“ 05182627/64 0.4219 5.11/16 7.1/4 051827

d1ØInch

d1decimalInch

l2Inch

l1Inch

EDP #or e-Code

7/16 0.4375 5.11/16 7.1/4 05182829/64 0.4531 5.3/4 7.1/2 05182915/32 0.4688 5.3/4 7.1/2 05183031/64 0.4844 5.3/4 7.3/4 0518311/2 0.5000 5.3/4 7.3/4 05183233/64 0.5156 6“ 8“ 05183317/32 0.5312 6“ 8“ 0518349/16 0.5625 6.1/4 8.1/4 05183637/64 0.5781 6.1/2 8.3/4 05183719/32 0.5938 6.1/2 8.3/4 05183839/64 0.6094 6.1/2 8.3/4 0518395/8 0.6250 6.1/2 8.3/4 05184041/64 0.6406 6.3/4 9“ 05184121/32 0.6562 6.3/4 9“ 05184211/16 0.6875 6.7/8 9.1/4 05184423/32 0.7188 7.1/8 9.1/2 0518463/4 0.7500 7.3/8 9.3/4 051848

R51K● Tanged shank


1.9/64 1.1406 7.1/4 11.7/8 0511091.5/32 1.1562 7.1/4 11.7/8 0511101.11/64 1.1719 7.3/8 12“ 0511111.3/16 1.1875 7.3/8 12“ 0511121.13/64 1.2031 7.1/2 12.1/8 0511131.7/32 1.2188 7.1/2 12.1/8 0511141.15/64 1.2344 7.7/8 12.1/2 0511151.1/4 1.2500 7.7/8 12.1/2 0511161.5/16 1.3125 8.5/8 14.1/4 0511201.3/8 1.3750 8.7/8 14.1/2 0511241.7/16 1.4375 9.1/8 14.3/4 0511281.1/2 1.5000 9.3/8 15“ 0511321.9/16 1.5625 9.5/8 15.1/4 0511361.5/8 1.6250 9.7/8 15.5/8 0511401.3/4 1.7500 10.1/2 16.1/4 051148

R51

R51

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/64 0.0156 5/16 1.1/2 0510011/32 0.0312 3/4 2“ 0510023/64 0.0469 1.1/8 2.1/4 0510031/16 0.0625 1.3/4 3“ 0510045/64 0.0781 2“ 3.3/4 0510053/32 0.0938 2.1/4 4.1/4 0510067/64 0.1094 2.1/2 4.5/8 0510071/8 0.1250 2.3/4 5.1/8 0510089/64 0.1406 3“ 5.3/8 0510095/32 0.1562 3“ 5.3/8 05101011/64 0.1719 3.3/8 5.3/4 0510113/16 0.1875 3.3/8 5.3/4 05101213/64 0.2031 3.5/8 6“ 0510137/32 0.2188 3.5/8 6“ 05101415/64 0.2344 3.3/4 6.1/8 0510151/4 0.2500 3.3/4 6.1/8 05101617/64 0.2656 3.7/8 6.1/4 0510179/32 0.2812 3.7/8 6.1/4 05101819/64 0.2969 4“ 6.3/8 0510195/16 0.3125 4“ 6.3/8 05102021/64 0.3281 4.1/8 6.1/2 05102111/32 0.3438 4.1/8 6.1/2 05102223/64 0.3594 4.1/4 6.3/4 0510233/8 0.3750 4.1/4 6.3/4 05102425/64 0.3906 4.3/8 7“ 05102513/32 0.4062 4.3/8 7“ 05102627/64 0.4219 4.5/8 7.1/4 0510277/16 0.4375 4.5/8 7.1/4 05102829/64 0.4531 4.3/4 7.1/2 05102915/32 0.4688 4.3/4 7.1/2 05103031/64 0.4844 4.3/4 7.3/4 0510311/2 0.5000 4.3/4 7.3/4 05103233/64 0.5156 4.3/4 8“ 05103317/32 0.5312 4.3/4 8“ 05103435/64 0.5469 4.7/8 8.1/4 0510359/16 0.5625 4.7/8 8.1/4 05103637/64 0.5781 4.7/8 8.3/4 05103719/32 0.5938 4.7/8 8.3/4 05103839/64 0.6094 4.7/8 8.3/4 0510395/8 0.6250 4.7/8 8.3/4 05104041/64 0.6406 5.1/8 9“ 05104121/32 0.6562 5.1/8 9“ 05104243/64 0.6719 5.3/8 9.1/4 05104311/16 0.6875 5.3/8 9.1/4 051044

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

45/64 0.7031 5.5/8 9.1/2 05104523/32 0.7188 5.5/8 9.1/2 05104647/64 0.7344 5.7/8 9.3/4 0510473/4 0.7500 5.7/8 9.3/4 05104849/64 0.7656 6“ 9.7/8 05104925/32 0.7812 6“ 9.7/8 05105051/64 0.7969 6.1/8 10“ 05105113/16 0.8125 6.1/8 10“ 05105253/64 0.8281 6.1/8 10“ 05105327/32 0.8438 6.1/8 10“ 05105455/64 0.8594 6.1/8 10“ 0510557/8 0.8750 6.1/8 10“ 05105657/64 0.8906 6.1/8 10“ 05105729/32 0.9062 6.1/8 10“ 05105859/64 0.9219 6.1/8 10.3/4 05105915/16 0.9375 6.1/8 10.3/4 05106061/64 0.9531 6.3/8 11“ 05106131/32 0.9688 6.3/8 11“ 05106263/64 0.9844 6.3/8 11“ 0510631“ 1.0000 6.3/8 11“ 0511001.1/64 1.0156 6.1/2 11.1/8 0511011.1/32 1.0312 6.1/2 11.1/8 0511021.3/64 1.0469 6.5/8 11.1/4 0511031.1/16 1.0625 6.5/8 11.1/4 0511041.5/64 1.0781 6.7/8 11.1/2 0511051.3/32 1.0938 6.7/8 11.1/2 0511061.7/64 1.1094 7.1/8 11.3/4 0511071.1/8 1.1250 7.1/8 11.3/4 051108



Note: Sizes 45/64 and larger are steam oxide

8 0.1990 3.5/8 6“ 0520087 0.2010 3.5/8 6“ 0520076 0.2040 3.5/8 6“ 0520065 0.2055 3.5/8 6“ 0520054 0.2090 3.5/8 6“ 0520043 0.2130 3.5/8 6“ 0520032 0.2210 3.3/4 6.1/8 0520021 0.2280 3.3/4 6.1/8 052001

R52

R52

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

80 0.0135 5/16 1.1/2 05208079 0.0145 5/16 1.1/2 05207978 0.0160 5/16 1.1/2 05207877 0.0180 5/16 1.1/2 05207776 0.0200 5/16 1.1/2 05207675 0.0210 5/16 1.1/2 05207574 0.0225 5/16 1.1/2 05207473 0.0240 5/16 1.1/2 05207372 0.0250 5/16 1.1/2 05207271 0.0260 3/4 2“ 05207170 0.0280 3/4 2“ 05207069 0.0292 3/4 2“ 05206968 0.0310 3/4 2“ 05206867 0.0320 3/4 2“ 05206766 0.0330 3/4 2“ 05206665 0.0350 3/4 2“ 05206564 0.0360 3/4 2“ 05206463 0.0370 3/4 2“ 05206362 0.0380 3/4 2“ 05206261 0.0390 1.1/8 2.1/4 05206160 0.0400 1.1/8 2.1/4 05206059 0.0410 1.1/8 2.1/4 05205958 0.0420 1.1/8 2.1/4 05205857 0.0430 1.1/8 2.1/4 05205756 0.0465 1.1/8 2.1/4 05205655 0.0520 1.3/4 3“ 05205554 0.0550 1.3/4 3“ 05205453 0.0595 1.3/4 3“ 05205352 0.0635 2“ 3.3/4 05205251 0.0670 2“ 3.3/4 05205150 0.0700 2“ 3.3/4 05205049 0.0730 2“ 3.3/4 05204948 0.0760 2“ 3.3/4 05204847 0.0785 2.1/4 4.1/4 05204746 0.0810 2.1/4 4.1/4 05204645 0.0820 2.1/4 4.1/4 05204544 0.0860 2.1/4 4.1/4 05204443 0.0890 2.1/4 4.1/4 05204342 0.0935 2.1/4 4.1/4 05204241 0.0960 2.1/2 4.5/8 05204140 0.0980 2.1/2 4.5/8 05204039 0.0995 2.1/2 4.5/8 052039

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

38 0.1015 2.1/2 4.5/8 05203837 0.1040 2.1/2 4.5/8 05203736 0.1065 2.1/2 4.5/8 05203635 0.1100 2.3/4 5.1/8 05203534 0.1110 2.3/4 5.1/8 05203433 0.1130 2.3/4 5.1/8 05203332 0.1160 2.3/4 5.1/8 05203231 0.1200 2.3/4 5.1/8 05203130 0.1285 3“ 5.3/8 05203029 0.1360 3“ 5.3/8 05202928 0.1405 3“ 5.3/8 05202827 0.1440 3“ 5.3/8 05202726 0.1470 3“ 5.3/8 05202625 0.1495 3“ 5.3/8 05202524 0.1520 3“ 5.3/8 05202423 0.1540 3“ 5.3/8 05202322 0.1570 3.3/8 5.3/4 05202221 0.1590 3.3/8 5.3/4 05202120 0.1610 3.3/8 5.3/4 05202019 0.1660 3.3/8 5.3/4 05201918 0.1695 3.3/8 5.3/4 05201817 0.1730 3.3/8 5.3/4 05201716 0.1770 3.3/8 5.3/4 05201615 0.1800 3.3/8 5.3/4 05201514 0.1820 3.3/8 5.3/4 05201413 0.1850 3.3/8 5.3/4 05201312 0.1890 3.5/8 6“ 05201211 0.1910 3.5/8 6“ 05201110 0.1935 3.5/8 6“ 0520109 0.1960 3.5/8 6“ 052009




R55

R55

●

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

A 0.2340 3.3/4 6.1/8 055001B 0.2380 3.3/4 6.1/8 055002C 0.2420 3.3/4 6.1/8 055003D 0.2460 3.3/4 6.1/8 055004E 0.2500 3.3/4 6.1/8 055005F 0.2570 3.7/8 6.1/4 055006G 0.2610 3.7/8 6.1/4 055007H 0.2660 3.7/8 6.1/4 055008I 0.2720 3.7/8 6.1/4 055009J 0.2770 3.7/8 6.1/4 055010K 0.2810 3.7/8 6.1/4 055011L 0.2900 4“ 6.3/8 055012M 0.2950 4“ 6.3/8 055013N 0.3020 4“ 6.3/8 055014

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 4.1/8 6.1/2 055015P 0.3230 4.1/8 6.1/2 055016Q 0.3320 4.1/8 6.1/2 055017R 0.3390 4.1/8 6.1/2 055018S 0.3480 4.1/4 6.3/4 055019T 0.3580 4.1/4 6.3/4 055020U 0.3680 4.1/4 6.3/4 055021V 0.3770 4.3/8 7“ 055022W 0.3860 4.3/8 7“ 055023X 0.3970 4.3/8 7“ 055024Y 0.4040 4.3/8 7“ 055025Z 0.4130 4.5/8 7.1/4 055026


5ATL

5ATL

●

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

1.00 0.0394 33 56 0561001.20 0.0472 41 65 0561201.25 0.0492 41 65 0561251.30 0.0512 41 65 0561301.40 0.0551 45 70 0561401.50 0.0591 45 70 0561501.60 0.0630 50 76 0561601.70 0.0669 50 76 0561701.80 0.0709 53 80 0561801.90 0.0748 53 80 0561902.00 0.0787 56 85 0562002.10 0.0827 56 85 0562102.15 0.0846 59 90 0562152.20 0.0866 59 90 0562202.30 0.0906 59 90 0562302.40 0.0945 62 95 0562402.50 0.0984 62 95 0562503.00 0.1181 66 100 0563003.10 0.1220 69 106 0563103.20 0.1260 69 106 0563203.30 0.1299 69 106 0563303.40 0.1339 73 112 0563403.50 0.1378 73 112 0563503.60 0.1417 73 112 0563603.70 0.1457 73 112 0563703.80 0.1496 78 119 0563804.00 0.1575 78 119 0564004.20 0.1654 78 119 0564204.30 0.1693 82 126 0564304.50 0.1772 82 126 0564504.60 0.1811 82 126 0564604.80 0.1890 87 132 0564805.00 0.1969 87 132 0565005.50 0.2165 91 139 0565505.60 0.2205 91 139 0565605.70 0.2244 91 139 056570

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

6.00 0.2362 91 139 0566006.40 0.2520 97 148 0566406.50 0.2559 97 148 0566506.80 0.2677 102 156 0566807.00 0.2756 102 156 0567707.20 0.2835 102 156 0567207.50 0.2953 102 156 0567507.80 0.3071 109 165 0567808.00 0.3150 109 165 0568008.20 0.3228 109 165 0568208.50 0.3346 109 165 0568509.00 0.3543 115 175 0569009.20 0.3622 115 175 0569209.50 0.3740 115 175 0569509.80 0.3858 121 184 05698010.00 0.3937 121 184 05710010.20 0.4016 121 184 05710210.50 0.4134 121 184 05710511.00 0.4331 128 195 05711011.20 0.4409 128 195 05711211.50 0.4528 128 195 05711512.00 0.4724 134 205 05712012.50 0.4921 134 205 05712513.00 0.5118 134 205 05713013.50 0.5315 140 214 05713513.80 0.5433 140 214 05713814.00 0.5512 140 214 05714014.50 0.5709 144 220 05714515.00 0.5906 144 220 05715015.50 0.6102 149 227 05715516.00 0.6299 149 227 05716016.50 0.6496 154 235 05716517.00 0.6693 154 235 05717017.50 0.6890 158 241 05717518.00 0.7087 158 241 05718018.50 0.7283 162 247 057185

Steam Tempered 18.00mm and above



5ATLSteam Tempered 18.00mm and above

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

19.00 0.7480 162 247 05719019.50 0.7677 166 254 05719520.00 0.7874 166 254 05720020.50 0.8071 171 261 05720521.00 0.8268 171 261 05721021.50 0.8465 176 268 05721522.00 0.8661 176 268 05722022.50 0.8858 180 275 05722523.00 0.9055 180 275 05723023.50 0.9252 180 275 05723524.00 0.9449 185 282 05724024.50 0.9646 185 282 057245

d1Ømm

d1decimalInch

l2mm

l1mm

EDP #ore-Code

25.00 0.9843 185 282 05725025.50 1.0039 190 290 05725526.00 1.0236 190 290 05726026.50 1.0433 190 290 05726527.00 1.0630 195 298 05727028.00 1.1024 195 298 05728028.50 1.1220 201 307 05728529.00 1.1417 201 307 05729029.50 1.1614 201 307 05729530.00 1.1811 201 307 05730030.50 1.2008 207 316 05730531.00 1.2205 207 316 057310



R09

R09

■

●

d1 ØInch

d1 dec.Inch

l2Inch

l1Inch

EDP # or e-Code

1/8 0.1250 2.3/4 5.1/8 0519089/64 0.1406 3“ 5.3/8 0519095/32 0.1562 3“ 5.3/8 05191011/64 0.1719 3.3/8 5.3/4 0519113/16 0.1875 3.3/8 5.3/4 05191213/64 0.2031 3.5/8 6“ 0519137/32 0.2188 3.5/8 6“ 05191415/64 0.2344 3.3/4 6.1/8 0519151/4 0.2500 3.3/4 6.1/8 05191617/64 0.2656 3.7/8 6.1/4 0519179/32 0.2812 3.7/8 6.1/4 05191819/64 0.2969 4“ 6.3/8 0519195/16 0.3125 4“ 6.3/8 05192021/64 0.3281 4.1/8 6.1/2 05192111/32 0.3438 4.1/8 6.1/2 05192223/64 0.3594 4.1/4 6.3/4 0519233/8 0.3750 4.1/4 6.3/4 05192425/64 0.3906 4.3/8 7“ 051925

d1 ØInch

d1 dec.Inch

l2Inch

l1Inch

EDP # or e-Code

13/32 0.4062 4.3/8 7“ 05192627/64 0.4219 4.5/8 7.1/4 0519277/16 0.4375 4.5/8 7.1/4 05192829/64 0.4531 4.3/4 7.1/2 05192915/32 0.4688 4.3/4 7.1/2 05193031/64 0.4844 4.3/4 7.3/4 0519311/2 0.5000 4.3/4 7.3/4 05193233/64 0.5156 4.3/4 8“ 05193317/32 0.5312 4.3/4 8“ 05193435/64 0.5469 4.7/8 8.1/4 0519359/16 0.5625 4.7/8 8.1/4 05193637/64 0.5781 4.7/8 8.3/4 05193719/32 0.5938 4.7/8 8.3/4 0519385/8 0.6250 4.7/8 8.3/4 05194021/32 0.6562 5.1/8 9“ 05194243/64 0.6719 5.3/8 9.1/4 05194311/16 0.6875 5.3/8 9.1/4 051944

● Automotive Tanged Shank● Foret serie longue ● Taper Length Drill ● Broca de mango conico- Serie Larga


R51FS - R52FS

R52FS d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

60 0.0400 1.1/8 2.1/4 05256058 0.0420 1.1/8 2.1/4 05255856 0.0465 1.1/8 2.1/4 05255655 0.0520 1.3/4 3“ 05255554 0.0550 1.3/4 3“ 05255453 0.0595 1.3/4 3“ 05255352 0.0635 2“ 3.3/4 05255251 0.0670 2“ 3.3/4 05255150 0.0700 2“ 3.3/4 05255048 0.0760 2“ 3.3/4 05254847 0.0785 2.1/4 4.1/4 05254746 0.0810 2.1/4 4.1/4 05254645 0.0820 2.1/4 4.1/4 05254544 0.0860 2.1/4 4.1/4 05254443 0.0890 2.1/4 4.1/4 05254342 0.0935 2.1/4 4.1/4 05254241 0.0960 2.1/2 4.5/8 05254140 0.0980 2.1/2 4.5/8 05254039 0.0995 2.1/2 4.5/8 05253938 0.1015 2.1/2 4.5/8 05253837 0.1040 2.1/2 4.5/8 05253736 0.1065 2.1/2 4.5/8 05253635 0.1100 2.3/4 5.1/8 05253534 0.1110 2.3/4 5.1/8 05253432 0.1160 2.3/4 5.1/8 05253231 0.1200 2.3/4 5.1/8 05253130 0.1285 3“ 5.3/8 05253029 0.1360 3“ 5.3/8 052529

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

28 0.1405 3“ 5.3/8 05252827 0.1440 3“ 5.3/8 05252726 0.1470 3“ 5.3/8 05252625 0.1495 3“ 5.3/8 05252524 0.1520 3“ 5.3/8 05252423 0.1540 3“ 5.3/8 05252322 0.1570 3.3/8 5.3/4 05252221 0.1590 3.3/8 5.3/4 05252120 0.1610 3.3/8 5.3/4 05252019 0.1660 3.3/8 5.3/4 05251918 0.1695 3.3/8 5.3/4 05251816 0.1770 3.3/8 5.3/4 05251615 0.1800 3.3/8 5.3/4 05251514 0.1820 3.3/8 5.3/4 05251413 0.1850 3.3/8 5.3/4 05251312 0.1890 3.5/8 6“ 05251211 0.1910 3.5/8 6“ 05251110 0.1935 3.5/8 6“ 0525109 0.1960 3.5/8 6“ 0525097 0.2010 3.5/8 6“ 0525076 0.2040 3.5/8 6“ 0525065 0.2055 3.5/8 6“ 0525054 0.2090 3.5/8 6“ 0525043 0.2130 3.5/8 6“ 0525032 0.2210 3.3/4 6.1/8 0525021 0.2280 3.3/4 6.1/8 052501

R51FS

■

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/16 0.0625 1.3/4 3“ 0515045/64 0.0781 2“ 3.3/4 0515053/32 0.0938 2.1/4 4.1/4 0515067/64 0.1094 2.1/2 4.5/8 0515071/8 0.1250 2.3/4 5.1/8 0515089/64 0.1406 3“ 5.3/8 0515095/32 0.1562 3“ 5.3/8 05151011/64 0.1719 3.3/8 5.3/4 0515113/16 0.1875 3.3/8 5.3/4 05151213/64 0.2031 3.5/8 6“ 0515137/32 0.2188 3.5/8 6“ 05151415/64 0.2344 3.3/4 6.1/8 0515151/4 0.2500 3.3/4 6.1/8 05151617/64 0.2656 3.7/8 6.1/4 051517

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

9/32 0.2812 3.7/8 6.1/4 05151819/64 0.2969 4“ 6.3/8 0515195/16 0.3125 4“ 6.3/8 05152021/64 0.3281 4.1/8 6.1/2 05152111/32 0.3438 4.1/8 6.1/2 05152223/64 0.3594 4.1/4 6.3/4 0515233/8 0.3750 4.1/4 6.3/4 05152425/64 0.3906 4.3/8 7“ 05152513/32 0.4062 4.3/8 7“ 05152627/64 0.4219 4.5/8 7.1/4 0515277/16 0.4375 4.5/8 7.1/4 05152829/64 0.4531 4.3/4 7.1/2 05152915/32 0.4688 4.3/4 7.1/2 05153031/64 0.4844 4.3/4 7.3/4 0515311/2 0.5000 4.3/4 7.3/4 051532

● High helix● Foret serie longue ● Taper Length Drill ● Broca de mango conico- Serie Larga


R55FS

R55FS

■

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

B 0.2380 3.3/4 6.1/8 055502C 0.2420 3.3/4 6.1/8 055503D 0.2460 3.3/4 6.1/8 055504F 0.2570 3.7/8 6.1/4 055506G 0.2610 3.7/8 6.1/4 055507I 0.2720 3.7/8 6.1/4 055509J 0.2770 3.7/8 6.1/4 055510L 0.2900 4“ 6.3/8 055512M 0.2950 4“ 6.3/8 055513N 0.3020 4“ 6.3/8 055514

d1 Ø

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

O 0.3160 4.1/8 6.1/2 055515P 0.3230 4.1/8 6.1/2 055516Q 0.3320 4.1/8 6.1/2 055517R 0.3390 4.1/8 6.1/2 055518T 0.3580 4.1/4 6.3/4 055520U 0.3680 4.1/4 6.3/4 055521V 0.3770 4.3/8 7“ 055522W 0.3860 4.3/8 7“ 055523

● High helix● Foret serie longue ● Taper Length Drill ● Broca de mango conico- Serie Larga

ProdType

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

RangeDim

LaunchLo-goDate



1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








HS

S E

xtra

Len

gth

Dril

ls

HSS Extra Length Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper













7


Finish/Coating:


Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:

Point Style:Special Standard:

136

1

23

4

1

2

3

A976 A977 A978

138 139 139●102C ●102B ●102A●85C ●85B ●85A■72C ■72B ■72A■72C ■72B ■72A■39A ■39A ■39A■33A ■33A ■33A

●39B ●39B ●39A●23C ●23B ●23A●26A ●26A ●26A

●75C ●75B ●75A●52C ●52B ●52A●36A ●36A ●36A●49C ●49B ●49A●36A ●36A ●36A●16A ●16A ●16A

●98D ●98C ●98B●89D ●89C ●89B

●89D ●89C ●89B

PFX PFX PFX


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


HS

S E

xtra

Len

gth

Dril

lsHSS Extra Length Drills (con‘t)

137

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

CO500-6 CO501-6

CO500-12 CO501-12

500-6, 501-6, 502-6

500-12, 501-12, 502-12 QC0860P QC1290P 0860 1290 1511 1813 A345

140 141 142-143 144-145 146 148 146 147 149 149 150■98F ■98F ■79E ■79E ■79E ■79E ■79G■59F ■59F ■72E ■72E ■72E ■72E ■72G

●82F ●82F ■66H ■66H ●52C ●52C ●52C ●52C ●56E●66F ●66F ■59F ■59F ●49C ●49C ●49C ●49C ●49D■43E ■43E ■46D ■46D ●20A ●20A ●20A ●20A ●20C

■20B ■20B ■30D ■30D ●16A ●16A ●16A ●16A ●16B

●95H ●95H ●49E ●49E ●89H ●89H ●30C ●30C ●30C ●30C ●39C●56F ●56F ■26G ■26G ●49F ●49F ●13E ●13E ●13E ●13E ●13E●56D ●56D ■30C ■30C ●49D ●49D ●26A ●26A ●26A ●26A ●26A●30D ●30D●161H ●161H ●98I ●98I ■151H ■151H ●72G ●72G ●72G ●72G ●72G●85H ●85H ●79F ●79F ■79H ■79H ●59D ●59D ●59D ●59D ●59D●85F ●85F ●66E ●66E ■79F ■79F ●43C ●43C ●43C ●43C ●43C■56D ■56D ■46E ■46E ●30C ●30C ●30C ●30C ●30C

■75F ■75F ●36D ●36D ●36D ●36D ●49D■39D ■39D ●30B ●30B ●30B ●30B ●30B

■20D ■20D ■20B ■20B ●16A ●16A ●16A ●16A ●16A■33G ■33G ●49F ●49F ●16E ●16E ●16E ●16E ●26E

■20B ■20B ●20E ●20E ●13C ●13C ●13C ●13C ●13C●16B ●16B ●10A ●10A ●10A ●10A ●10A ●10A ●10A

●79D ●79D ●79D ●79D ●89D●79H ●79H ●108G ●108G ●108G ●108G ●108G

●89H ●89H ●75H ●75H ●72F ●72F ●72F ●72F ●89F■52G ■52G ●52D ●52D ●52D ●52D ●52D

●348H ●348H ●79H ●79H ●79H ●79H ●108H●325H ●325H ●72G ●72G ●72G ●72G ●89G

●72F ●72F ●72F ●72F ●89F■79F ■79F ●276H ●276H ●66E ●66E ●66E ●66E ●79F

●151D ●151D ●98H ●98H ●98H ●98H ●98J●125D ●125D ●85F ●85F ●85F ●85F ●98H

●33D ●33D ●33D ●33D ●33F●10B ●10B ●10A ●10A ●10A ●10A ●10A



A976

A976

■●

d1Øh8Inch

d1Øh8mm

d1decimalInch

l2

mm

l1

mm Stock #

EDP #ore-Code

1.50 0.0590 75 115 0347362 A9761.52.00 0.0787 85 125 0148501 A9762.0X1252.10 0.0826 85 125 0279724 A9762.1X1252.20 0.0866 90 135 0148518 A9762.2X1352.30 0.0905 90 135 0279717 A9762.3X1352.40 0.0944 95 140 0279731 A9762.4X1402.50 0.0984 95 140 0148525 A9762.5X1402.60 0.1023 95 140 0279748 A9762.6X1402.70 0.1062 100 150 0279755 A9762.7X1502.80 0.1102 100 150 0279762 A9762.8X1502.90 0.1141 100 150 0279779 A9762.9X1503.00 0.1181 100 150 0148532 A9763.0X1503.10 0.1220 105 155 0279786 A9763.1X155

1/8 3.18 0.1251 105 155 0347072 A9761/83.20 0.1259 105 155 0279793 A9763.2X1553.30 0.1299 105 155 0148549 A9763.3X1553.40 0.1338 115 165 0279809 A9763.4X1653.50 0.1377 115 165 0148556 A9763.5X1653.60 0.1417 115 165 0279816 A9763.6X1653.70 0.1456 115 165 0148563 A9763.7X1653.80 0.1496 120 175 0279823 A9763.8X1753.90 0.1535 120 175 0279830 A9763.9X175

5/32 3.97 0.1562 120 175 0347089 A9765/324.00 0.1574 120 175 0148570 A9764.0X1754.10 0.1614 120 175 0279847 A9764.1X1754.20 0.1653 120 175 0279854 A9764.2X1754.30 0.1692 125 185 0279861 A9764.3X1854.40 0.1732 125 185 0279878 A9764.4X1854.50 0.1771 125 185 0148587 A9764.5X1854.60 0.1811 125 185 0279885 A9764.6X1854.70 0.1850 125 185 0279892 A9764.7X185

3/16 4.76 0.1874 135 195 0347935 A9763/164.80 0.1889 135 195 0279908 A9764.8X1954.90 0.1929 135 195 0279915 A9764.9X1955.00 0.1968 135 195 0148594 A9765.0X1955.10 0.2007 135 195 0279922 A9765.1X195

d1Øh8Inch

d1Øh8mm

d1decimalInch

l2

mm

l1

mm Stock #

EDP #ore-Code

5.20 0.2047 135 195 0279939 A9765.2X1955.30 0.2086 135 195 0279946 A9765.3X1955.40 0.2125 140 205 0279953 A9765.4X2055.50 0.2165 140 205 0148600 A9765.5X2055.60 0.2204 140 205 0279960 A9765.6X2055.70 0.2244 140 205 0279977 A9765.7X2055.80 0.2283 140 205 0279984 A9765.8X2055.90 0.2322 140 205 0279991 A9765.9X2056.00 0.2362 140 205 0148617 A9766.0X2056.10 0.2401 150 215 0280003 A9766.1X2156.20 0.2440 150 215 0280010 A9766.2X2156.30 0.2480 150 215 0280027 A9766.3X215

1/4 6.35 0.2500 140 205 0347096 A9761/4 1)

6.40 0.2519 150 215 0280034 A9766.4X2156.50 0.2559 150 215 0148624 A9766.5X2156.60 0.2598 150 215 0280041 A9766.6X2156.70 0.2637 150 215 0280058 A9766.7X2156.80 0.2677 155 225 0280065 A9766.8X2256.90 0.2716 155 225 0280072 A9766.9X2257.00 0.2755 155 225 0148631 A9767.0X2257.50 0.2952 155 225 0148648 A9767.5X225

5/16 7.94 0.3125 165 240 0347102 A9765/168.00 0.3149 165 240 0148655 A9768.0X2408.50 0.3346 165 240 0148662 A9768.5X240

11/32 8.73 0.3437 175 250 0347119 A97611/329.00 0.3543 175 250 0148679 A9769.0X2509.50 0.3740 175 250 0148686 A9769.5X250

3/8 9.53 0.3751 185 265 0347126 A9763/810.00 0.3937 185 265 0148693 A97610.0X26510.50 0.4133 185 265 0347133 A97610.511.00 0.4330 195 280 0347140 A97611.0 1)

7/16 11.11 0.4374 195 280 0347379 A9767/16 1)

11.50 0.4527 195 280 0347157 A97611.5 1)

12.00 0.4724 205 295 0347164 A97612.0 1)

12.50 0.4921 205 295 0347171 A97612.5 1)

1/2 12.70 0.5000 205 295 0347188 A9761/2 1)

13.00 0.5118 205 295 0347195 A97613.0 1)

14.00 0.5511 215 310 0347201 A97614.0 1)

1) Dormer Standard

● PFX extra length drill ● Foret PFX extra-long ● Broca PFX Extra Larga


1) Dormer Standard

1) Dormer Standard

A977 - A978

A977

■●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2

mm

l1

mm Stock #

EDP #ore-Code

1.50 0.0590 100 150 0347386 A9771.51/16 1.59 0.0625 100 150 0347393 A9771/16

2.00 0.0787 110 160 0347409 A9772.03/32 2.38 0.0937 115 170 0347416 A9773/32

3.00 0.1181 130 190 0148709 A9773.0X1901/8 3.18 0.1251 135 200 0347218 A9771/8

3.50 0.1377 145 210 0148716 A9773.5X2104.00 0.1574 150 220 0148723 A9774.0X2204.50 0.1771 160 235 0148730 A9774.5X235

3/16 4.76 0.1874 170 245 0347225 A9773/165.00 0.1968 170 245 0148747 A9775.0X2455.50 0.2165 180 260 0148754 A9775.5X2606.00 0.2362 180 260 0148761 A9776.0X260

1/4 6.35 0.2500 180 260 0347232 A9771/4 1)

6.50 0.2559 190 275 0148778 A9776.5X2757.00 0.2755 200 290 0148785 A9777.0X290

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2

mm

l1

mm Stock #

EDP #ore-Code

7.50 0.2952 200 290 0148792 A9777.5X2908.00 0.3149 210 305 0148808 A9778.0X3058.50 0.3346 210 305 0148815 A9778.5X305

11/32 8.73 0.3437 220 320 0347249 A97711/329.00 0.3543 220 320 0148822 A9779.0X3209.50 0.3740 220 320 0148839 A9779.5X32010.00 0.3937 235 340 0148846 A97710.0X34010.50 0.4133 235 340 0347256 A97710.511.00 0.4330 250 365 0347263 A97711.0 1)

11.50 0.4527 250 365 0347270 A97711.5 1)

12.00 0.4724 260 375 0347287 A97712.0 1)

12.50 0.4921 260 375 0347294 A97712.5 1)

13.00 0.5118 260 375 0347300 A97713.0 1)

14.00 0.5511 270 390 0347317 A97714.0 1)

● PFX extra length drill ● Foret PFX extra-long ● Broca PFX Extra Larga

A978

■●

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2

mm

l1

mm

DormerStockNo.

EDP #ore-Code

3.00 0.1181 160 240 0347324 A9783.03.50 0.1377 180 265 0148853 A9783.5X2654.00 0.1574 190 280 0148860 A9784.0X2804.50 0.1771 200 295 0148877 A9784.5X2955.00 0.1968 210 315 0148884 A9785.0X3155.50 0.2165 225 330 0148891 A9785.5X3306.00 0.2362 225 330 0148907 A9786.0X330

1/4 6.35 0.2500 225 330 0347331 A9781/4 1)

d1Øh8Inch

d1Øh8mm

d1dec.Inch

l2

mm

l1

mm

DormerStockNo.

EDP #ore-Code

6.50 0.2559 235 350 0148914 A9786.5X3507.00 0.2755 250 370 0148921 A9787.0X3707.50 0.2952 250 370 0148938 A9787.5X3708.00 0.3149 265 390 0148945 A9788.0X3908.50 0.3346 265 390 0148952 A9788.5X3909.00 0.3543 280 410 0148969 A9789.0X4109.50 0.3740 280 410 0148976 A9789.5X41010.00 0.3937 295 430 0148983 A97810.0X430


CO500-6

CO500-6

■●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/16 0.0625 7/8 6“ 0536045/64 0.0781 1“ 6“ 0536053/32 0.0938 1.1/4 6“ 0536067/64 0.1094 1.1/2 6“ 0536071/8 0.1250 1.5/8 6“ 0536089/64 0.1406 1.3/4 6“ 0536095/32 0.1562 2“ 6“ 05361011/64 0.1719 2.1/8 6“ 053611

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

3/16 0.1875 2.5/16 6“ 05361213/64 0.2031 2.7/16 6“ 0536137/32 0.2188 2.1/2 6“ 05361415/64 0.2344 2.5/8 6“ 0536151/4 0.2500 2.3/4 6“ 053616

CO501-6CO501-6d1 d1

decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

52 0.0635 7/8 6“ 05375251 0.0670 1“ 6“ 05375150 0.0700 1“ 6“ 05375049 0.0730 1“ 6“ 05374948 0.0760 1“ 6“ 05374847 0.0785 1“ 6“ 05374746 0.0810 1.1/8 6“ 05374645 0.0820 1.1/8 6“ 05374544 0.0860 1.1/8 6“ 05374443 0.0890 1.1/4 6“ 05374342 0.0935 1.1/4 6“ 05374241 0.0960 1.3/8 6“ 05374140 0.0980 1.3/8 6“ 05374039 0.0995 1.3/8 6“ 05373938 0.1015 1.7/16 6“ 05373837 0.1040 1.7/16 6“ 05373736 0.1065 1.7/16 6“ 05373635 0.1100 1.1/2 6“ 05373534 0.1110 1.1/2 6“ 05373433 0.1130 1.1/2 6“ 05373332 0.1160 1.5/8 6“ 05373231 0.1200 1.5/8 6“ 05373130 0.1285 1.5/8 6“ 05373029 0.1360 1.3/4 6“ 05372928 0.1405 1.3/4 6“ 05372827 0.1440 1.7/8 6“ 053727

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

26 0.1470 1.7/8 6“ 05372625 0.1495 1.7/8 6“ 05372524 0.1520 2“ 6“ 05372423 0.1540 2“ 6“ 05372322 0.1570 2“ 6“ 05372221 0.1590 2.1/8 6“ 05372120 0.1610 2.1/8 6“ 05372019 0.1660 2.1/8 6“ 05371918 0.1695 2.1/8 6“ 05371817 0.1730 2.3/16 6“ 05371716 0.1770 2.3/16 6“ 05371615 0.1800 2.3/16 6“ 05371514 0.1820 2.3/16 6“ 05371413 0.1850 2.5/16 6“ 05371312 0.1890 2.5/16 6“ 05371211 0.1910 2.5/16 6“ 05371110 0.1935 2.7/16 6“ 0537109 0.1960 2.7/16 6“ 0537098 0.1990 2.7/16 6“ 0537087 0.2010 2.7/16 6“ 0537076 0.2040 2.1/2 6“ 0537065 0.2055 2.1/2 6“ 0537054 0.2090 2.1/2 6“ 0537043 0.2130 2.1/2 6“ 0537032 0.2210 2.5/8 6“ 0537021 0.2280 2.5/8 6“ 053701

● Foret aéronautique à queue cylindrique rallongée● Aircraft extension drill ● Broca extralarga para la industria Aeronáutica● Type J


CO500-12

CO500-12

■●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/16 0.0625 7/8 12“ 0526045/64 0.0781 1“ 12“ 0526053/32 0.0938 1.1/4 12“ 0526067/64 0.1094 1.1/2 12“ 0526071/8 0.1250 1.5/8 12“ 0526089/64 0.1406 1.3/4 12“ 0526095/32 0.1562 2“ 12“ 05261011/64 0.1719 2.1/8 12“ 052611

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

3/16 0.1875 2.5/16 12“ 05261213/64 0.2031 2.7/16 12“ 0526137/32 0.2188 2.1/2 12“ 05261415/64 0.2344 2.5/8 12“ 0526151/4 0.2500 2.3/4 12“ 052616

CO501-12

● Foret aéronautique à queue cylindrique rallongée

CO501-12

■●

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

40 0.0980 1.3/8 12“ 05284033 0.1130 1.1/2 12“ 05283330 0.1285 1.5/8 12“ 05283029 0.1360 1.3/4 12“ 05282927 0.1440 1.7/8 12“ 05282721 0.1590 2.1/8 12“ 052821

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

20 0.1610 2.1/8 12“ 05282019 0.1660 2.1/8 12“ 05281916 0.1770 2.3/16 12“ 05281611 0.1910 2.5/16 12“ 05281110 0.1935 2.7/16 12“ 0528102 0.2210 2.5/8 12“ 052802

● Aircraft extension drill ● Broca extralarga para la industria Aeronáutica● Type J


500-6

500-6

■

●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

3/64 0.0469 3/4 6“ 058003 1)

1/16 0.0625 7/8 6“ 0580045/64 0.0781 1“ 6“ 0580053/32 0.0938 1.1/4 6“ 0580067/64 0.1094 1.1/2 6“ 0580071/8 0.1250 1.5/8 6“ 0580089/64 0.1406 1.3/4 6“ 0580095/32 0.1562 2“ 6“ 05801011/64 0.1719 2.1/8 6“ 0580113/16 0.1875 2.5/16 6“ 05801213/64 0.2031 2.7/16 6“ 0580137/32 0.2188 2.1/2 6“ 05801415/64 0.2344 2.5/8 6“ 0580151/4 0.2500 2.3/4 6“ 05801617/64 0.2656 2.7/8 6“ 0580179/32 0.2812 2.15/16 6“ 058018

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

19/64 0.2969 3.1/16 6“ 0580195/16 0.3125 3.3/16 6“ 05802021/64 0.3281 3.5/16 6“ 05802111/32 0.3438 3.7/16 6“ 05802223/64 0.3594 3.1/2 6“ 0580233/8 0.3750 3.5/8 6“ 05802425/64 0.3906 3.3/4 6“ 05802513/32 0.4062 3.7/8 6“ 05802627/64 0.4219 3.15/16 6“ 0580277/16 0.4375 4.1/16 6“ 05802829/64 0.4531 4.3/16 6“ 05802915/32 0.4688 4.5/16 6“ 05803031/64 0.4844 4.3/8 6“ 0580311/2 0.5000 4.1/2 6“ 058032

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

A 0.2340 2.5/8 6“ 058201B 0.2380 2.3/4 6“ 058202C 0.2420 2.3/4 6“ 058203D 0.2460 2.3/4 6“ 058204E 0.2500 2.3/4 6“ 058205F 0.2570 2.7/8 6“ 058206G 0.2610 2.7/8 6“ 058207H 0.2660 2.7/8 6“ 058208I 0.2720 2.7/8 6“ 058209J 0.2770 2.7/8 6“ 058210K 0.2810 2.15/16 6“ 058211L 0.2900 2.15/16 6“ 058212M 0.2950 3.1/16 6“ 058213N 0.3020 3.1/16 6“ 058214

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

O 0.3160 3.3/16 6“ 058215P 0.3230 3.5/16 6“ 058216Q 0.3320 3.7/16 6“ 058217R 0.3390 3.7/16 6“ 058218S 0.3480 3.1/2 6“ 058219T 0.3580 3.1/2 6“ 058220U 0.3680 3.5/8 6“ 058221V 0.3770 3.5/8 6“ 058222W 0.3860 3.3/4 6“ 058223X 0.3970 3.3/4 6“ 058224Y 0.4040 3.7/8 6“ 058225Z 0.4130 3.7/8 6“ 058226

502-6502-6


1) Not Split Point

● Aircraft extension drill ● Broca extralarga para la industria Aeronáutica● Type B


501-6

501-6

■●

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

60 0.0400 11/16 6“ 058160 1)

59 0.0410 11/16 6“ 058159 1)

58 0.0420 11/16 6“ 058158 1)

57 0.0430 3/4 6“ 058157 1)

56 0.0465 3/4 6“ 058156 1)

55 0.0520 7/8 6“ 058155 1)

54 0.0550 7/8 6“ 058154 1)

53 0.0595 7/8 6“ 058153 1)

52 0.0635 7/8 6“ 05815251 0.0670 1“ 6“ 05815150 0.0700 1“ 6“ 05815049 0.0730 1“ 6“ 05814948 0.0760 1“ 6“ 05814847 0.0785 1“ 6“ 05814746 0.0810 1.1/8 6“ 05814645 0.0820 1.1/8 6“ 05814544 0.0860 1.1/8 6“ 05814443 0.0890 1.1/4 6“ 05814342 0.0935 1.1/4 6“ 05814241 0.0960 1.3/8 6“ 05814140 0.0980 1.3/8 6“ 05814039 0.0995 1.3/8 6“ 05813938 0.1015 1.7/16 6“ 05813837 0.1040 1.7/16 6“ 05813736 0.1065 1.7/16 6“ 05813635 0.1100 1.1/2 6“ 05813534 0.1110 1.1/2 6“ 05813433 0.1130 1.1/2 6“ 05813332 0.1160 1.5/8 6“ 05813231 0.1200 1.5/8 6“ 058131

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

30 0.1285 1.5/8 6“ 05813029 0.1360 1.3/4 6“ 05812928 0.1405 1.3/4 6“ 05812827 0.1440 1.7/8 6“ 05812726 0.1470 1.7/8 6“ 05812625 0.1495 1.7/8 6“ 05812524 0.1520 2“ 6“ 05812423 0.1540 2“ 6“ 05812322 0.1570 2“ 6“ 05812221 0.1590 2.1/8 6“ 05812120 0.1610 2.1/8 6“ 05812019 0.1660 2.1/8 6“ 05811918 0.1695 2.1/8 6“ 05811817 0.1730 2.3/16 6“ 05811716 0.1770 2.3/16 6“ 05811615 0.1800 2.3/16 6“ 05811514 0.1820 2.3/16 6“ 05811413 0.1850 2.5/16 6“ 05811312 0.1890 2.5/16 6“ 05811211 0.1910 2.5/16 6“ 05811110 0.1935 2.7/16 6“ 0581109 0.1960 2.7/16 6“ 0581098 0.1990 2.7/16 6“ 0581087 0.2010 2.7/16 6“ 0581076 0.2040 2.1/2 6“ 0581065 0.2055 2.1/2 6“ 0581054 0.2090 2.1/2 6“ 0581043 0.2130 2.1/2 6“ 0581032 0.2210 2.5/8 6“ 0581021 0.2280 2.5/8 6“ 058101


1) Not Split Point

● Aircraft extension drill ● Broca extralarga para la industria Aeronáutica● Type B


500-12

500-12

■

●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

3/64 0.0469 3/4 12“ 059003 1)

1/16 0.0625 7/8 12“ 0590045/64 0.0781 1“ 12“ 0590053/32 0.0938 1.1/4 12“ 0590067/64 0.1094 1.1/2 12“ 0590071/8 0.1250 1.5/8 12“ 0590089/64 0.1406 1.3/4 12“ 0590095/32 0.1562 2“ 12“ 05901011/64 0.1719 2.1/8 12“ 0590113/16 0.1875 2.5/16 12“ 05901213/64 0.2031 2.7/16 12“ 0590137/32 0.2188 2.1/2 12“ 05901415/64 0.2344 2.5/8 12“ 0590151/4 0.2500 2.3/4 12“ 05901617/64 0.2656 2.7/8 12“ 0590179/32 0.2812 2.15/16 12“ 059018

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

19/64 0.2969 3.1/16 12“ 0590195/16 0.3125 3.3/16 12“ 05902021/64 0.3281 3.5/16 12“ 05902111/32 0.3438 3.7/16 12“ 05902223/64 0.3594 3.1/2 12“ 0590233/8 0.3750 3.5/8 12“ 05902425/64 0.3906 3.3/4 12“ 05902513/32 0.4062 3.7/8 12“ 05902627/64 0.4219 3.15/16 12“ 0590277/16 0.4375 4.1/16 12“ 05902829/64 0.4531 4.3/16 12“ 05902915/32 0.4688 4.5/16 12“ 05903031/64 0.4844 4.3/8 12“ 0590311/2 0.5000 4.1/2 12“ 059032

502-12d1 d1

decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

A 0.2340 2.5/8 12“ 059201B 0.2380 2.3/4 12“ 059202C 0.2420 2.3/4 12“ 059203D 0.2460 2.3/4 12“ 059204E 0.2500 2.3/4 12“ 059205F 0.2570 2.7/8 12“ 059206G 0.2610 2.7/8 12“ 059207H 0.2660 2.7/8 12“ 059208I 0.2720 2.7/8 12“ 059209J 0.2770 2.7/8 12“ 059210K 0.2810 2.15/16 12“ 059211L 0.2900 2.15/16 12“ 059212M 0.2950 3.1/16 12“ 059213N 0.3020 3.1/16 12“ 059214

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

O 0.3160 3.3/16 12“ 059215P 0.3230 3.5/16 12“ 059216Q 0.3320 3.7/16 12“ 059217R 0.3390 3.7/16 12“ 059218S 0.3480 3.1/2 12“ 059219T 0.3580 3.1/2 12“ 059220U 0.3680 3.5/8 12“ 059221V 0.3770 3.5/8 12“ 059222W 0.3860 3.3/4 12“ 059223X 0.3970 3.3/4 12“ 059224Y 0.4040 3.7/8 12“ 059225Z 0.4130 3.7/8 12“ 059226

502-12

● Foret aéronautique à queue cylindrique rallongée● Aircraft extension drill ● Broca extralarga para la industria Aeronáutica

1) Not Split Point

● Type B


501-12

501-12

■

●

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

50 0.0700 1“ 12“ 05915049 0.0730 1“ 12“ 05914948 0.0760 1“ 12“ 05914847 0.0785 1“ 12“ 05914746 0.0810 1.1/8 12“ 05914645 0.0820 1.1/8 12“ 05914544 0.0860 1.1/8 12“ 05914443 0.0890 1.1/4 12“ 05914342 0.0935 1.1/4 12“ 05914241 0.0960 1.3/8 12“ 05914140 0.0980 1.3/8 12“ 05914039 0.0995 1.3/8 12“ 05913938 0.1015 1.7/16 12“ 05913837 0.1040 1.7/16 12“ 05913736 0.1065 1.7/16 12“ 05913631 0.1200 1.5/8 12“ 05913130 0.1285 1.5/8 12“ 05913029 0.1360 1.3/4 12“ 05912927 0.1440 1.7/8 12“ 05912726 0.1470 1.7/8 12“ 059126

d1 d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

25 0.1495 1.7/8 12“ 05912523 0.1540 2“ 12“ 05912322 0.1570 2“ 12“ 05912221 0.1590 2.1/8 12“ 05912120 0.1610 2.1/8 12“ 05912019 0.1660 2.1/8 12“ 05911918 0.1695 2.1/8 12“ 05911817 0.1730 2.3/16 12“ 05911716 0.1770 2.3/16 12“ 05911613 0.1850 2.5/16 12“ 05911312 0.1890 2.5/16 12“ 05911211 0.1910 2.5/16 12“ 05911110 0.1935 2.7/16 12“ 0591109 0.1960 2.7/16 12“ 0591097 0.2010 2.7/16 12“ 0591075 0.2055 2.1/2 12“ 0591054 0.2090 2.1/2 12“ 0591043 0.2130 2.1/2 12“ 0591031 0.2280 2.5/8 12“ 059101

● Foret aéronautique à queue cylindrique rallongée● Aircraft extension drill ● Broca extralarga para la industria Aeronáutica● Type B


0860 - QC0860P● Extra length drill ● Foret queue cône morse - Extra long ● Broca serie extra larga

0860

■●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/8 0.1250 6“ 8“ 0574085/32 0.1562 6“ 8“ 0574103/16 0.1875 6“ 8“ 0574127/32 0.2188 6“ 8“ 0574141/4 0.2500 6“ 8“ 0574169/32 0.2812 6“ 8“ 0574185/16 0.3125 6“ 8“ 05742011/32 0.3438 6“ 8“ 057422

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

3/8 0.3750 6“ 8“ 05742413/32 0.4062 6“ 8“ 0574267/16 0.4375 6“ 8“ 05742815/32 0.4688 6“ 8“ 0574301/2 0.5000 6“ 8“ 057432

QC0860P

● Extra Length Drill ● Foret queue cône morse - Extra long ● Broca serie extra larga

■●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/8 0.1250 6“ 8“ 0556089/64 0.1406 6“ 8“ 0556095/32 0.1562 6“ 8“ 05561011/64 0.1719 6“ 8“ 0556113/16 0.1875 6“ 8“ 05561213/64 0.2031 6“ 8“ 0556137/32 0.2188 6“ 8“ 05561415/64 0.2344 6“ 8“ 0556151/4 0.2500 6“ 8“ 05561617/64 0.2656 6“ 8“ 0556179/32 0.2812 6“ 8“ 05561819/64 0.2969 6“ 8“ 0556195/16 0.3125 6“ 8“ 05562021/64 0.3281 6“ 8“ 055621

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

11/32 0.3438 6“ 8“ 05562223/64 0.3594 6“ 8“ 0556233/8 0.3750 6“ 8“ 05562425/64 0.3906 6“ 8“ 05562513/32 0.4062 6“ 8“ 05562627/64 0.4219 6“ 8“ 0556277/16 0.4375 6“ 8“ 05562829/64 0.4531 6“ 8“ 05562915/32 0.4688 6“ 8“ 05563031/64 0.4844 6“ 8“ 0556311/2 0.5000 6“ 8“ 055632

● Wide-Land Parabolic Flute


1290

1290

■

●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/8 0.1250 9“ 12“ 0596089/64 0.1406 9“ 12“ 0596095/32 0.1562 9“ 12“ 05961011/64 0.1719 9“ 12“ 0596113/16 0.1875 9“ 12“ 05961213/64 0.2031 9“ 12“ 0596137/32 0.2188 9“ 12“ 05961415/64 0.2344 9“ 12“ 0596151/4 0.2500 9“ 12“ 05961617/64 0.2656 9“ 12“ 0596179/32 0.2812 9“ 12“ 05961819/64 0.2969 9“ 12“ 0596195/16 0.3125 9“ 12“ 05962021/64 0.3281 9“ 12“ 05962111/32 0.3438 9“ 12“ 05962223/64 0.3594 9“ 12“ 0596233/8 0.3750 9“ 12“ 05962425/64 0.3906 9“ 12“ 05962513/32 0.4062 9“ 12“ 05962627/64 0.4219 9“ 12“ 059627

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

7/16 0.4375 9“ 12“ 05962829/64 0.4531 9“ 12“ 05962915/32 0.4688 9“ 12“ 05963031/64 0.4844 9“ 12“ 0596311/2 0.5000 9“ 12“ 05963233/64 0.5156 9“ 12“ 05963317/32 0.5312 9“ 12“ 05963435/64 0.5469 9“ 12“ 0596359/16 0.5625 9“ 12“ 05963637/64 0.5781 9“ 12“ 05963719/32 0.5938 9“ 12“ 05963839/64 0.6094 9“ 12“ 0596395/8 0.6250 9“ 12“ 05964021/32 0.6562 9“ 12“ 05964211/16 0.6875 9“ 12“ 05964423/32 0.7188 9“ 12“ 0596463/4 0.7500 9“ 12“ 059648

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

1)

● Extra Length Drill ● Foret queue cône morse - Extra long ● Broca serie extra larga

1) 33/64” - 3/4” are Steam Oxide


QC1290P

QC1290P

■

●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/8 0.1250 9“ 12“ 0603089/64 0.1406 9“ 12“ 0603095/32 0.1562 9“ 12“ 06031011/64 0.1719 9“ 12“ 0603113/16 0.1875 9“ 12“ 06031213/64 0.2031 9“ 12“ 0603137/32 0.2188 9“ 12“ 06031415/64 0.2344 9“ 12“ 0603151/4 0.2500 9“ 12“ 06031617/64 0.2656 9“ 12“ 0603179/32 0.2812 9“ 12“ 06031819/64 0.2969 9“ 12“ 060319

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

5/16 0.3125 9“ 12“ 06032021/64 0.3281 9“ 12“ 06032111/32 0.3438 9“ 12“ 06032223/64 0.3594 9“ 12“ 0603233/8 0.3750 9“ 12“ 06032425/64 0.3906 9“ 12“ 06032513/32 0.4062 9“ 12“ 06032627/64 0.4219 9“ 12“ 0603277/16 0.4375 9“ 12“ 06032829/64 0.4531 9“ 12“ 06032915/32 0.4688 9“ 12“ 06033031/64 0.4844 9“ 12“ 0603311/2 0.5000 9“ 12“ 060332

● Extra Length Drill ● Foret queue cône morse - Extra long ● Broca serie extra larga● Wide-Land Parabolic Flute


NOTE: 17/32” and larger are steam tempered

NOTE: 33/64” and larger are steam tempered

● Foret queue cône morse - Extra long

1813

■●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

1/4 0.2500 13“ 18“ 05971617/64 0.2656 13“ 18“ 0597179/32 0.2812 13“ 18“ 05971819/64 0.2969 13“ 18“ 0597195/16 0.3125 13“ 18“ 05972021/64 0.3281 13“ 18“ 05972111/32 0.3438 13“ 18“ 05972223/64 0.3594 13“ 18“ 0597233/8 0.3750 13“ 18“ 05972425/64 0.3906 13“ 18“ 05972513/32 0.4062 13“ 18“ 05972627/64 0.4219 13“ 18“ 0597277/16 0.4375 13“ 18“ 05972829/64 0.4531 13“ 18“ 05972915/32 0.4688 13“ 18“ 05973031/64 0.4844 13“ 18“ 0597311/2 0.5000 13“ 18“ 05973233/64 0.5156 13“ 18“ 059733

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

17/32 0.5312 13“ 18“ 05973435/64 0.5469 13“ 18“ 0597359/16 0.5625 13“ 18“ 05973637/64 0.5781 13“ 18“ 05973719/32 0.5938 13“ 18“ 05973839/64 0.6094 13“ 18“ 0597395/8 0.6250 13“ 18“ 05974021/32 0.6562 13“ 18“ 05974211/16 0.6875 13“ 18“ 05974423/32 0.7188 13“ 18“ 0597463/4 0.7500 13“ 18“ 05974825/32 0.7812 13“ 18“ 05975013/16 0.8125 13“ 18“ 0597527/8 0.8750 13“ 18“ 05975615/16 0.9375 13“ 18“ 0597601“ 1.0000 13“ 18“ 059764

1511 - 1813

1511

■

●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

3/16 0.1875 11“ 15“ 0595121/4 0.2500 11“ 15“ 0595165/16 0.3125 11“ 15“ 05952011/32 0.3438 11“ 15“ 0595223/8 0.3750 11“ 15“ 0595247/16 0.4375 11“ 15“ 0595281/2 0.5000 11“ 15“ 05953217/32 0.5312 11“ 15“ 0595349/16 0.5625 11“ 15“ 0595365/8 0.6250 11“ 15“ 059540

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

EDP #ore-Code

21/32 0.6562 11“ 15“ 05954211/16 0.6875 11“ 15“ 05954423/32 0.7188 11“ 15“ 0595463/4 0.7500 11“ 15“ 05954825/32 0.7812 11“ 15“ 05955013/16 0.8125 11“ 15“ 0595527/8 0.8750 11“ 15“ 05955415/16 0.9375 11“ 15“ 0595561“ 1.0000 11“ 15“ 059558

● Extra Length Drill ● Broca serie extra larga


A345

A345

■

●

d1ØInch

d1Ømm

d1dec.Inch

l2

mm

l1

mm MK Stock #

EDP #ore-Code

8.00 0.3149 165 265 1 0418383 A3458.08.50 0.3346 165 265 1 0418390 A3458.59.00 0.3543 175 275 1 0418406 A3459.09.50 0.3740 175 275 1 0420201 A3459.5

3/8 9.53 0.3751 185 285 1 0418307 A3453/810.00 0.3937 185 285 1 0418062 A34510.0

13/32 10.32 0.4062 185 285 1 0418116 A34513/3210.50 0.4133 185 285 1 0420171 A34510.511.00 0.4330 195 300 1 0418079 A34511.0

7/16 11.11 0.4374 195 300 1 0418369 A3457/1611.50 0.4527 195 300 1 0419564 A34511.5

29/64 11.51 0.4531 205 310 1 0418284 A34529/6412.00 0.4724 205 310 1 0418093 A34512.012.50 0.4921 205 310 1 0419571 A34512.5

1/2 12.70 0.5000 205 310 1 0418055 A3451/213.00 0.5118 205 310 1 0418109 A34513.0

17/32 13.49 0.5311 220 325 1 0418161 A34517/3213.50 0.5314 220 325 1 0419588 A34513.514.00 0.5511 220 325 1 0418123 A34514.0

9/16 14.29 0.5625 220 340 2 0418413 A3459/1637/64 14.68 0.5779 220 340 2 0418321 A34537/64

15.00 0.5905 220 340 2 0418130 A34515.0

d1ØInch

d1Ømm

d1dec.Inch

l2

mm

l1

mm MK Stock #

EDP #ore-Code

39/64 15.48 0.6094 230 355 2 0418338 A34539/6415.50 0.6102 230 355 2 0419601 A34515.5

5/8 15.88 0.6251 230 355 2 0418352 A3455/816.00 0.6299 230 355 2 0418147 A34516.0

41/64 16.27 0.6405 230 355 2 0418345 A34541/6416.50 0.6496 230 355 2 0419618 A34516.5

21/32 16.67 0.6562 230 355 2 0418215 A34521/3217.00 0.6692 230 355 2 0418154 A34517.0

11/16 17.46 0.6874 245 370 2 0418086 A34511/1617.50 0.6889 245 370 2 0419625 A34517.518.00 0.7086 245 370 2 0418178 A34518.018.50 0.7283 245 370 2 0419632 A34518.519.00 0.7480 245 370 2 0418185 A34519.0

3/4 19.05 0.7500 260 385 2 0418291 A3453/419.50 0.7677 260 385 2 0419649 A34519.520.00 0.7874 260 385 2 0418192 A34520.020.50 260 385 2 0419656 A34520.521.00 0.8267 260 385 2 0418208 A34521.021.50 270 405 2 0419663 A34521.522.00 0.8661 270 405 2 0418222 A34522.0

7/8 22.23 0.8751 270 405 2 0418376 A3457/822.50 270 405 3 0419670 A34522.5

● Foret queue cône morse - Extra long● Extra Length Drill ● Broca serie extra larga● Taper shank


A345d1ØInch

d1Ømm

d1dec.Inch

l2

mm

l1

mm MK Stock #

EDP #ore-Code

23.00 0.9055 270 405 3 0419687 A34523.023.50 270 425 3 0419694 A34523.524.00 0.9448 290 440 3 0418239 A34524.024.50 290 440 3 0419700 A34524.525.00 0.9842 290 440 3 0418246 A34525.0

1“ 25.40 1.0000 290 440 3 0418031 A345125.50 290 440 3 0419717 A34525.526.00 1.0236 290 440 3 0418253 A34526.026.50 290 440 3 0419724 A34526.527.00 1.0629 305 460 3 0418260 A34527.028.00 1.1023 305 460 3 0418277 A34528.029.00 305 460 3 0419731 A34529.030.00 1.1811 305 460 3 0418314 A34530.0

1.1/4 31.75 1.2500 320 480 3 0418048 A3451.1/431.00 320 480 3 0419748 A34531.032.00 1.2598 320 505 4 0419755 A34532.0

d1ØInch

d1Ømm

d1dec.Inch

l2

mm

l1

mm MK Stock #

EDP #ore-Code

1.1/2 38.10 1.5000 360 555 4 0419540 A3451.1/239.00 1.5354 360 555 4 0419816 A34539.040.00 1.5748 360 555 4 0419823 A34540.041.00 1.6141 360 555 4 0419830 A34541.042.00 1.6535 360 555 4 0419847 A34542.0

1.3/4 44.45 1.7500 385 585 4 0419557 A3451.3/445.00 1.7716 385 585 4 0419854 A34545.048.00 1.8897 405 605 4 0419861 A34548.050.00 1.9685 405 605 4 0419878 A34550.0

33.00 1.2992 320 505 4 0422564 A34533.034.00 1.3385 340 530 4 0419762 A34534.035.00 1.3779 340 530 4 0419779 A34535.036.00 1.4173 340 530 4 0419786 A34536.037.00 1.4566 340 530 4 0419793 A34537.038.00 1.4960 360 555 4 0419809 A34538.0

ProdType

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

RangeDim

LaunchLo-goDate



1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








HSS Taper/Reduced Shank Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper









To calculate Cutting Feed Rate, refer to chart on page 9-10.


● = Good for Application ■ = Excellent for Application


Finish/Coating:

Standard:

Direction of Cut:

Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:

Point Style:

HS

S T

aper

/Red

uced

Sha

nk D

rills

152

1

23

4

1

2

3

209CO 209OH 209 L209

154 155 156 158●115J ■154F ■115I ■115I●98H ■75F ■98I ■98I●89G ■98H ■82F ■82F●75F ■85F ■66F ■66F■56E ●59D ●39E ●39E■33D ●30B ●30D ●30D

●79E ●118H ●49E ●49E■36G ●66F ●30G ●30G■56C ●66D ●33C ●33C

●49D●115J ■180H ■98I ■98I●92G ■108H ■79E ■79E●72E ●134F ●66E ●66E■56E ●75D ●46E ●46E●92G ●108H ●75F ●75F●66D ●98F ●43D ●43D●36C ●26D ●23B ●23B●49G ●75F ●33G ●33G●23E ●23E ●23E●20B ●13A ●13A●125L ●108F ●108F●131J ●115I ●115I●89H ●115H ●115H●69F ●52F ●52F●108J ●85J ●85J●98I ●98I ●98I●98H ●92H ●92H●89F ●75H ●75H●115K ●98K ●98K●92J ●92J ●92J●66H ●46H ●46H●16C ●10B ●10B


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


HS

S T

aper

/Red

uced

Sha

nk D

rills

153

HSS Taper/Reduced Shank Drills (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

S209 5ATS R56CO R56 R57 R58

159 160 162 163 164 165■115I ■115I ●115H ●115H ●115H ■98F■98I ■98I ●98H ●98H ●98H ■59F■82F ■82F ●82F ●82F ●82F ■66H■66F ■66F ●66E ●66E ●66E ■59F●39E ●39E ●43D ●43D ●43D ●46D●30D ●30D ●30C ●30C ●30C

●49E ●49E ●49D ●49D ●49D ●89H●30G ●30G ●23F ●23F ●23F ●49F●33C ●33C ●23B ●23B ●23B ●49D

■98I ■98I ●89H ●89H ●89H ■151H■79E ■79E ●72E ●72E ●72E ■79H●66E ●66E ●62D ●62D ●62D ●79F●46E ●46E ●39D ●39D ●39D●75F ●75F ●56E ●56E ●56E ●89H●43D ●43D ●30C ●30C ●30C ●49F●23B ●23B ●16A ●16A ●16A●33G ●33G ●26F ●26F ●26F ●49F●23E ●23E ●13D ●13D ●13D ●23F●13A ●13A ●10A ●10A ●10A ●13B●108F ●108F ●115F ●115F ●115F ●108F●115I ●115I ●108H ●108H ●108H ●115H●115H ●115H ●89G ●89G ●89G ●115H●52F ●52F ●52F ●52F ●52F ●52F●85J ●85J ●108I ●108I ●108I ●85I●98I ●98I ●98H ●98H ●98H ●98H●92H ●92H ●89G ●89G ●89G ●92H●75H ●75H ●72G ●72G ●72G ●75H●98K ●98K ●98I ●98I ●98I ●98I●92J ●92J ●92G ●92G ●92G ●92I●46H ●46H ●46E ●46E ●46E ●46H●10B ●10B ●10A ●10A ●10A ●10B



209CO

209CO

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1/4 0.2500 2.7/8 6.1/8 1 0213169/32 0.2812 3“ 6.1/4 1 0213185/16 0.3125 3.1/8 6.3/8 1 02132011/32 0.3438 3.1/4 6.1/2 1 0213223/8 0.3750 3.1/2 7.3/8 2 02132413/32 0.4062 3.5/8 7.1/2 2 02132627/64 0.4219 3.7/8 7.3/4 2 0213277/16 0.4375 3.7/8 7.3/4 2 02132829/64 0.4531 4.1/8 8“ 2 02132915/32 0.4688 4.1/8 8“ 2 02133031/64 0.4844 4.3/8 8.1/4 2 0213311/2 0.5000 4.3/8 8.1/4 2 02133233/64 0.5156 4.5/8 8.1/2 2 02133317/32 0.5312 4.5/8 8.1/2 2 02133435/64 0.5469 4.7/8 8.3/4 2 0213359/16 0.5625 4.7/8 8.3/4 2 02133637/64 0.5781 4.7/8 8.3/4 2 02133719/32 0.5938 4.7/8 8.3/4 2 02133839/64 0.6094 4.7/8 8.3/4 2 0213395/8 0.6250 4.7/8 8.3/4 2 02134041/64 0.6406 5.1/8 9“ 2 02134121/32 0.6562 5.1/8 9.3/4 3 02134243/64 0.6719 5.3/8 10“ 3 02134311/16 0.6875 5.3/8 10“ 3 02134445/64 0.7031 5.5/8 10.1/4 3 02134523/32 0.7188 5.5/8 10.1/4 3 02134847/64 0.7344 5.7/8 10.1/2 3 0213473/4 0.7500 5.7/8 10.1/2 3 02135049/64 0.7656 6“ 10.5/8 3 02134925/32 0.7812 6“ 10.5/8 3 02135251/64 0.7969 6.1/8 10.3/4 3 02135113/16 0.8125 6.1/8 10.3/4 3 02135453/64 0.8281 6.1/8 10.3/4 3 02135327/32 0.8438 6.1/8 10.3/4 3 021355

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

55/64 0.8594 6.1/8 10.3/4 3 0213577/8 0.8750 6.1/8 10.3/4 3 02135657/64 0.8906 6.1/8 10.3/4 3 02135829/32 0.9062 6.1/8 10.3/4 3 02135959/64 0.9219 6.1/8 10.3/4 3 02136215/16 0.9375 6.1/8 10.3/4 3 02136061/64 0.9531 6.3/8 11“ 3 02136331/32 0.9688 6.3/8 11“ 3 02136463/64 0.9844 6.3/8 11“ 3 0213651“ 1.0000 6.3/8 11“ 3 0214001.1/64 1.0156 6.1/2 12.1/8 4 0214011.1/32 1.0312 6.1/2 12.1/8 4 0214021.1/16 1.0625 6.5/8 12.1/4 4 0214041.3/32 1.0938 6.7/8 12.1/2 4 0214061.7/64 1.1094 7.1/8 12.3/4 4 0214071.1/8 1.1250 7.1/8 12.3/4 4 0214081.9/64 1.1406 7.1/4 12.7/8 4 0214091.5/32 1.1562 7.1/4 12.7/8 4 0214101.11/64 1.1719 7.3/8 13“ 4 0214111.3/16 1.1875 7.3/8 13“ 4 0214121.7/32 1.2188 7.1/2 13.1/8 4 0214141.15/64 1.2344 7.7/8 13.1/2 4 0214151.1/4 1.2500 7.7/8 13.1/2 4 0214161.9/32 1.2812 8.1/2 14.1/8 4 0214181.19/64 1.2969 8.5/8 14.1/4 4 0214191.5/16 1.3125 8.5/8 14.1/4 4 0214201.11/32 1.3438 8.3/4 14.3/8 4 0214221.23/64 1.3594 8.7/8 14.1/2 4 0214231.3/8 1.3750 8.7/8 14.1/2 4 0214241.27/64 1.4219 9.1/8 14.3/4 4 0214271.7/16 1.4375 9.1/8 14.3/4 4 0214281.15/32 1.4688 9.1/4 14.7/8 4 0214301.31/64 1.4844 9.3/8 15“ 4 0214311.1/2 1.5000 9.3/8 15“ 4 021432

● Taper shank drill ● Foret queue cône morse ● Broca de mango cónico● Notched point


● Foret queue cône morse

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1/2 0.5000 4.3/8 9“ 3 0216329/16 0.5625 4.7/8 9.1/2 3 0216365/8 0.6250 4.7/8 9.1/2 3 02164011/16 0.6875 5.3/8 10“ 3 0216443/4 0.7500 5.7/8 10.1/2 3 02164813/16 0.8125 6.1/8 10.3/4 3 0216527/8 0.8750 6.1/8 10.3/4 3 02165629/32 0.9062 6.1/8 10.3/4 3 02165815/16 0.9375 6.1/8 10.3/4 3 02166031/32 0.9688 6.3/8 11“ 3 021662

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1“ 1.0000 6.3/8 11“ 3 0217001.1/32 1.0312 6.1/2 11.1/8 3 0217021.1/16 1.0625 6.5/8 11.1/4 3 0217041.3/32 1.0938 6.7/8 12.1/2 4 0217061.1/8 1.1250 7.1/8 12.3/4 4 0217081.5/32 1.1562 7.1/4 12.7/8 4 0217101.3/16 1.1875 7.3/8 13“ 4 0217121.7/32 1.2188 7.1/2 13.1/8 4 0217141.1/4 1.2500 7.7/8 13.1/2 4 021716

209OH

209OH

● Taper shank drill ● Broca de mango cónico● 32° helix● Notched point

209

209

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1/8 0.1250 1.7/8 5.1/8 1 0200089/64 0.1406 2.1/8 5.3/8 1 0200095/32 0.1562 2.1/8 5.3/8 1 02001011/64 0.1719 2.1/2 5.3/4 1 0200113/16 0.1875 2.1/2 5.3/4 1 02001213/64 0.2031 2.3/4 6“ 1 0200137/32 0.2188 2.3/4 6“ 1 02001415/64 0.2344 2.7/8 6.1/8 1 0200151/4 0.2500 2.7/8 6.1/8 1 02001617/64 0.2656 3“ 6.1/4 1 0200179/32 0.2812 3“ 6.1/4 1 02001819/64 0.2969 3.1/8 6.3/8 1 0200195/16 0.3125 3.1/8 6.3/8 1 02002021/64 0.3281 3.1/4 6.1/2 1 02002111/32 0.3438 3.1/4 6.1/2 1 02002223/64 0.3594 3.1/2 6.3/4 1 0200233/8 0.3750 3.1/2 6.3/4 1 02002425/64 0.3906 3.5/8 7“ 1 02002513/32 0.4062 3.5/8 7“ 1 02002627/64 0.4219 3.7/8 7.1/4 1 0200277/16 0.4375 3.7/8 7.1/4 1 02002829/64 0.4531 4.1/8 7.1/2 1 02002915/32 0.4688 4.1/8 7.1/2 1 02003031/64 0.4844 4.3/8 8.1/4 2 0200311/2 0.5000 4.3/8 8.1/4 2 02003233/64 0.5156 4.5/8 8.1/2 2 02003317/32 0.5312 4.5/8 8.1/2 2 02003435/64 0.5469 4.7/8 8.3/4 2 0200359/16 0.5625 4.7/8 8.3/4 2 02003637/64 0.5781 4.7/8 8.3/4 2 02003719/32 0.5938 4.7/8 8.3/4 2 02003839/64 0.6094 4.7/8 8.3/4 2 0200395/8 0.6250 4.7/8 8.3/4 2 02004041/64 0.6406 5.1/8 9“ 2 02004121/32 0.6562 5.1/8 9“ 2 02004243/64 0.6719 5.3/8 9.1/4 2 020043

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

11/16 0.6875 5.3/8 9.1/4 2 02004445/64 0.7031 5.5/8 9.1/2 2 02004523/32 0.7188 5.5/8 9.1/2 2 02004647/64 0.7344 5.7/8 9.3/4 2 0200473/4 0.7500 5.7/8 9.3/4 2 02004849/64 0.7656 6“ 9.7/8 2 02004925/32 0.7812 6“ 9.7/8 2 02005051/64 0.7969 6.1/8 10.3/4 3 02005113/16 0.8125 6.1/8 10.3/4 3 02005253/64 0.8281 6.1/8 10.3/4 3 02005327/32 0.8438 6.1/8 10.3/4 3 02005455/64 0.8594 6.1/8 10.3/4 3 0200557/8 0.8750 6.1/8 10.3/4 3 02005657/64 0.8906 6.1/8 10.3/4 3 02005729/32 0.9062 6.1/8 10.3/4 3 02005859/64 0.9219 6.1/8 10.3/4 3 02005915/16 0.9375 6.1/8 10.3/4 3 02006061/64 0.9531 6.3/8 11“ 3 02006131/32 0.9688 6.3/8 11“ 3 02006263/64 0.9844 6.3/8 11“ 3 0200631“ 1.0000 6.3/8 11“ 3 0201001.1/64 1.0156 6.1/2 11.1/8 3 0201011.1/32 1.0312 6.1/2 11.1/8 3 0201021.3/64 1.0469 6.5/8 11.1/4 3 0201031.1/16 1.0625 6.5/8 11.1/4 3 0201041.5/64 1.0781 6.7/8 12.1/2 4 0201051.3/32 1.0938 6.7/8 12.1/2 4 0201061.7/64 1.1094 7.1/8 12.3/4 4 0201071.1/8 1.1250 7.1/8 12.3/4 4 0201081.9/64 1.1406 7.1/4 12.7/8 4 0201091.5/32 1.1562 7.1/4 12.7/8 4 0201101.11/64 1.1719 7.3/8 13“ 4 0201111.3/16 1.1875 7.3/8 13“ 4 0201121.13/64 1.2031 7.1/2 13.1/8 4 0201131.7/32 1.2188 7.1/2 13.1/8 4 0201141.15/64 1.2344 7.7/8 13.1/2 4 020115


● Foret queue cône morse● Taper shank drill ● Broca de mango cónico

209d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1.1/4 1.2500 7.7/8 13.1/2 4 0201161.17/64 1.2656 8.1/2 14.1/8 4 0201171.9/32 1.2812 8.1/2 14.1/8 4 0201181.19/64 1.2969 8.5/8 14.1/4 4 0201191.5/16 1.3125 8.5/8 14.1/4 4 0201201.21/64 1.3281 8.3/4 14.3/8 4 0201211.11/32 1.3438 8.3/4 14.3/8 4 0201221.23/64 1.3594 8.7/8 14.1/2 4 0201231.3/8 1.3750 8.7/8 14.1/2 4 0201241.25/64 1.3906 9“ 14.5/8 4 0201251.13/32 1.4062 9“ 14.5/8 4 0201261.27/64 1.4219 9.1/8 14.3/4 4 0201271.7/16 1.4375 9.1/8 14.3/4 4 0201281.29/64 1.4531 9.1/4 14.7/8 4 0201291.15/32 1.4688 9.1/4 14.7/8 4 0201301.31/64 1.4844 9.3/8 15“ 4 0201311.1/2 1.5000 9.3/8 15“ 4 0201321.17/32 1.5312 9.3/8 16.3/8 5 0201341.9/16 1.5625 9.5/8 16.5/8 5 0201361.19/32 1.5938 9.7/8 16.7/8 5 0201381.5/8 1.6250 10“ 17“ 5 0201401.21/32 1.6562 10.1/8 17.1/8 5 0201421.11/16 1.6875 10.1/8 17.1/8 5 0201441.23/32 1.7188 10.1/8 17.1/8 5 0201461.3/4 1.7500 10.1/8 17.1/8 5 0201481.25/32 1.7812 10.1/8 17.1/8 5 0201501.13/16 1.8125 10.1/8 17.1/8 5 0201521.27/32 1.8438 10.1/8 17.1/8 5 020154

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1.7/8 1.8750 10.3/8 17.3/8 5 0201561.29/32 1.9062 10.3/8 17.3/8 5 0201581.15/16 1.9375 10.3/8 17.3/8 5 0201601.31/32 1.9688 10.3/8 17.3/8 5 0201622“ 2.0000 10.3/8 17.3/8 5 0202002.1/32 2.0312 10.3/8 17.3/8 5 0202022.1/16 2.0625 10.1/4 17.3/8 5 0202042.3/32 2.0938 10.1/4 17.3/8 5 0202062.1/8 2.1250 10.1/4 17.3/8 5 0202082.5/32 2.1562 10.1/4 17.3/8 5 0202102.3/16 2.1875 10.1/4 17.3/8 5 0202122.7/32 2.2188 10.1/8 17.3/8 5 0202142.1/4 2.2500 10.1/8 17.3/8 5 0202162.5/16 2.3125 10.1/8 17.3/8 5 0202202.3/8 2.3750 10.1/8 17.3/8 5 0202242.7/16 2.4375 11.1/4 18.3/4 5 0202282.1/2 2.5000 11.1/4 18.3/4 5 0202322.9/16 2.5625 11.7/8 19.1/2 5 0202362.5/8 2.6250 11.7/8 19.1/2 5 0202402.11/16 2.6875 12.3/4 20.3/8 5 0202442.3/4 2.7500 12.3/4 20.3/8 5 0202482.13/16 2.8125 13.3/8 21.1/8 5 0202522.7/8 2.8750 13.3/8 21.1/8 5 0202562.15/16 2.9375 14“ 21.3/4 5 0202603“ 3.0000 14“ 21.3/4 5 020300


L209

L209

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

3/8 0.3750 3.1/2 7.3/8 2 02252425/64 0.3906 3.5/8 7.1/2 2 02252513/32 0.4062 3.5/8 7.1/2 2 02252627/64 0.4219 3.7/8 7.3/4 2 0225277/16 0.4375 3.7/8 7.3/4 2 02252829/64 0.4531 4.1/8 8“ 2 02252915/32 0.4688 4.1/8 8“ 2 02253041/64 0.6406 5.1/8 9.3/4 3 02254121/32 0.6562 5.1/8 9.3/4 3 02254243/64 0.6719 5.3/8 10“ 3 022543

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

11/16 0.6875 5.3/8 10“ 3 02254445/64 0.7031 5.5/8 10.1/4 3 02254523/32 0.7188 5.5/8 10.1/4 3 02254647/64 0.7344 5.7/8 10.1/2 3 0225473/4 0.7500 5.7/8 10.1/2 3 02254849/64 0.7656 6“ 10.5/8 3 02254925/32 0.7812 6“ 10.5/8 3 0225501“ 1.0000 6.3/8 12“ 4 0226001.1/32 1.0312 6.1/2 12.1/8 4 0226021.1/16 1.0625 6.5/8 12.1/4 4 022604


● Foret queue cône morse● Taper shank drill ● Broca de mango cónico● Large shank


● Foret queue cône morse

S209

S209

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

31/64 0.4844 4.3/8 7.3/4 1 0230311/2 0.5000 4.3/8 7.3/4 1 02303233/64 0.5156 4.5/8 8“ 1 02303317/32 0.5312 4.5/8 8“ 1 02303435/64 0.5469 4.7/8 8.1/4 1 0230359/16 0.5625 4.7/8 8.1/4 1 02303651/64 0.7969 6.1/8 10“ 2 02305113/16 0.8125 6.1/8 10“ 2 02305253/64 0.8281 6.1/8 10“ 2 02305327/32 0.8438 6.1/8 10“ 2 02305455/64 0.8594 6.1/8 10“ 2 0230557/8 0.8750 6.1/8 10“ 2 02305657/64 0.8906 6.1/8 10“ 2 02305729/32 0.9062 6.1/8 10“ 2 0230581.5/64 1.0781 6.7/8 11.1/2 3 0231051.3/32 1.0938 6.7/8 11.1/2 3 0231061.7/64 1.1094 7.1/8 11.3/4 3 0231071.1/8 1.1250 7.1/8 11.3/4 3 0231081.9/64 1.1406 7.1/4 11.7/8 3 0231091.5/32 1.1562 7.1/4 11.7/8 3 0231101.11/64 1.1719 7.3/8 12“ 3 0231111.3/16 1.1875 7.3/8 12“ 3 0231121.13/64 1.2031 7.1/2 12.1/8 3 0231131.7/32 1.2188 7.1/2 12.1/8 3 0231141.15/64 1.2344 7.7/8 12.1/2 3 0231151.1/4 1.2500 7.7/8 12.1/2 3 023116

d1ØInch

d1decimalInch

l2Inch

l1Inch MTS

EDP #ore-Code

1.33/64 1.5156 9.3/8 15“ 4 0231331.17/32 1.5312 9.3/8 15“ 4 0231341.35/64 1.5469 9.5/8 15.1/4 4 0231351.9/16 1.5625 9.5/8 15.1/4 4 0231361.37/64 1.5781 9.7/8 15.1/2 4 0231371.19/32 1.5938 9.7/8 15.1/2 4 0231381.39/64 1.6094 10“ 15.5/8 4 0231391.5/8 1.6250 10“ 15.5/8 4 0231401.41/64 1.6406 10.1/8 15.3/4 4 0231411.21/32 1.6562 10.1/8 15.3/4 4 0231421.43/64 1.6719 10.1/8 15.3/4 4 0231431.11/16 1.6875 10.1/8 15.3/4 4 0231441.45/64 1.7031 10.1/8 15.3/4 4 0231451.23/32 1.7188 10.1/8 15.3/4 4 0231461.47/64 1.7344 10.3/8 16.1/4 4 0231471.3/4 1.7500 10.3/8 16.1/4 4 0231481.25/32 1.7812 10.3/8 16.1/4 4 0231501.13/16 1.8125 10.3/8 16.1/4 4 0231521.27/32 1.8438 10.3/8 16.1/4 4 0231541.7/8 1.8750 10.1/2 16.1/2 4 0231561.29/32 1.9062 10.1/2 16.1/2 4 0231581.15/16 1.9375 10.5/8 16.5/8 4 0231601.31/32 1.9688 10.5/8 16.5/8 4 0231622“ 2.0000 10.5/8 16.5/8 4 023200

● Taper shank drill ● Broca de mango cónico● Small shank

5ATS

5ATS

■●

d1Ømm

d1decimalInch

l2mm

l1mm

MTS

EDP #ore-Code

5.00 0.1969 52 133 1 0260505.50 0.2165 57 138 1 0260556.00 0.2362 57 138 1 0260606.50 0.2559 63 144 1 0260656.80 0.2677 69 150 1 0260687.00 0.2756 69 150 1 0260707.50 0.2953 69 150 1 0260758.00 0.3150 75 156 1 0260808.50 0.3346 75 156 1 0260859.00 0.3543 81 162 1 0260909.50 0.3740 81 162 1 02609510.00 0.3937 87 168 1 02610010.20 0.4016 87 168 1 02610210.50 0.4134 87 168 1 02610511.00 0.4331 94 175 1 02611011.50 0.4528 94 175 1 02611512.00 0.4724 101 182 1 02612012.20 0.4803 101 182 1 02612212.50 0.4921 101 182 1 02612512.80 0.5039 101 182 1 02612813.00 0.5118 101 182 1 02613013.50 0.5315 108 189 1 02613513.80 0.5433 108 189 1 02613814.00 0.5512 108 189 1 02614014.25 0.5610 114 212 2 02614214.50 0.5709 114 212 2 02614514.75 0.5807 114 212 2 02614715.00 0.5906 114 212 2 02615015.25 0.6004 120 218 2 02615215.50 0.6102 120 218 2 02615515.75 0.6201 120 218 2 02615716.00 0.6299 120 218 2 02616016.25 0.6398 125 223 2 02616216.50 0.6496 125 223 2 02616516.75 0.6594 125 223 2 02616717.00 0.6693 125 223 026170

d1Ømm

d1decimalInch

l2mm

l1mm

MTS

EDP #ore-Code

17.25 0.6791 130 228 2 02617217.50 0.6890 130 228 2 02617518.00 0.7087 130 228 2 02618018.50 0.7283 135 233 2 02618519.00 0.7480 135 233 2 02619019.50 0.7677 140 238 2 02619520.00 0.7874 140 238 2 02620020.50 0.8071 145 243 2 02620521.00 0.8268 145 243 2 02621021.50 0.8465 150 248 2 02621522.00 0.8661 150 248 2 02622022.50 0.8858 155 253 2 02622523.00 0.9055 155 253 2 02623023.50 0.9252 155 276 3 02623524.00 0.9449 160 281 3 02624024.50 0.9646 160 281 3 02624525.00 0.9843 160 281 3 02625025.50 1.0039 165 286 3 02625526.00 1.0236 165 286 3 02626026.50 1.0433 165 286 3 02626527.00 1.0630 170 291 3 02627027.50 1.0827 170 291 3 02627528.00 1.1024 170 291 3 02628028.50 1.1220 175 296 3 02628529.00 1.1417 175 296 3 02629029.50 1.1614 175 296 3 02629530.00 1.1811 175 296 3 02630030.50 1.2008 180 301 3 02630531.00 1.2205 180 301 3 02631031.50 1.2402 180 301 3 02631532.00 1.2598 185 334 4 02632032.50 1.2795 185 334 4 02632533.00 1.2992 185 334 4 02633033.50 1.3189 185 334 4 02633534.00 1.3386 190 339 4 02634034.50 1.3583 190 339 4 026345


● Foret queue cône morse● Taper shank drill ● Broca de mango cónico

5ATSd1Ømm

d1decimalInch

l2mm

l1mm

MTS

EDP #ore-Code

35.00 1.3780 190 339 4 02635035.50 1.3976 190 339 4 02635536.00 1.4173 195 344 4 02636036.50 1.4370 195 344 4 02636537.00 1.4567 195 344 4 02637037.50 1.4764 195 344 4 02637538.00 1.4961 200 349 4 02638039.00 1.5354 200 349 4 02639040.00 1.5748 200 349 4 02640041.00 1.6142 205 354 4 026410

d1Ømm

d1decimalInch

l2mm

l1mm

MTS

EDP #ore-Code

42.00 1.6535 205 354 4 02642043.00 1.6929 210 359 4 02643044.00 1.7323 210 359 4 02644045.00 1.7717 210 359 4 02645047.00 1.8504 215 364 4 02647048.00 1.8898 220 369 4 02648049.00 1.9291 220 369 4 02649050.00 1.9685 220 369 4 026500



R56CO

R56CO

●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2

EDP #ore-Code

33/64 0.5156 3“ 6“ 1/2 09233317/32 0.5312 3“ 6“ 1/2 09233435/64 0.5469 3“ 6“ 1/2 0923359/16 0.5625 3“ 6“ 1/2 09233637/64 0.5781 3“ 6“ 1/2 09233719/32 0.5938 3“ 6“ 1/2 09233839/64 0.6094 3“ 6“ 1/2 0923395/8 0.6250 3“ 6“ 1/2 09234041/64 0.6406 3“ 6“ 1/2 09234121/32 0.6562 3“ 6“ 1/2 09234243/64 0.6719 3“ 6“ 1/2 09234311/16 0.6875 3“ 6“ 1/2 09234445/64 0.7031 3“ 6“ 1/2 09234523/32 0.7188 3“ 6“ 1/2 09234647/64 0.7344 3“ 6“ 1/2 0923473/4 0.7500 3“ 6“ 1/2 092348

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2

EDP #ore-Code

49/64 0.7656 3“ 6“ 1/2 09234925/32 0.7812 3“ 6“ 1/2 09235051/64 0.7969 3“ 6“ 1/2 09235113/16 0.8125 3“ 6“ 1/2 09235253/64 0.8281 3“ 6“ 1/2 09235327/32 0.8438 3“ 6“ 1/2 09235455/64 0.8594 3“ 6“ 1/2 0923557/8 0.8750 3“ 6“ 1/2 09235657/64 0.8906 3“ 6“ 1/2 09235729/32 0.9062 3“ 6“ 1/2 09235859/64 0.9219 3“ 6“ 1/2 09235915/16 0.9375 3“ 6“ 1/2 09236061/64 0.9531 3“ 6“ 1/2 09236131/32 0.9688 3“ 6“ 1/2 09236263/64 0.9844 3“ 6“ 1/2 0923631“ 1.0000 3“ 6“ 1/2 092364

● Foret queue dégagée de 12,7 mm● 1/2” reduced parallel shank drill● Round shank

● Brocas de mango cilindrico, Mango rebajado 1/2”

R56

R56

●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

33/64 0.5156 3“ 6“ 1/2 09143317/32 0.5312 3“ 6“ 1/2 09143435/64 0.5469 3“ 6“ 1/2 0914359/16 0.5625 3“ 6“ 1/2 09143637/64 0.5781 3“ 6“ 1/2 09143719/32 0.5938 3“ 6“ 1/2 09143839/64 0.6094 3“ 6“ 1/2 0914395/8 0.6250 3“ 6“ 1/2 09144041/64 0.6406 3“ 6“ 1/2 09144121/32 0.6562 3“ 6“ 1/2 09144243/64 0.6719 3“ 6“ 1/2 09144311/16 0.6875 3“ 6“ 1/2 09144445/64 0.7031 3“ 6“ 1/2 09144523/32 0.7188 3“ 6“ 1/2 09144647/64 0.7344 3“ 6“ 1/2 0914473/4 0.7500 3“ 6“ 1/2 09144849/64 0.7656 3“ 6“ 1/2 09144925/32 0.7812 3“ 6“ 1/2 09145051/64 0.7969 3“ 6“ 1/2 09145113/16 0.8125 3“ 6“ 1/2 09145253/64 0.8281 3“ 6“ 1/2 09145327/32 0.8438 3“ 6“ 1/2 09145455/64 0.8594 3“ 6“ 1/2 0914557/8 0.8750 3“ 6“ 1/2 09145657/64 0.8906 3“ 6“ 1/2 09145729/32 0.9062 3“ 6“ 1/2 09145859/64 0.9219 3“ 6“ 1/2 09145915/16 0.9375 3“ 6“ 1/2 091460

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

61/64 0.9531 3“ 6“ 1/2 09146131/32 0.9688 3“ 6“ 1/2 09146263/64 0.9844 3“ 6“ 1/2 0914631“ 1.0000 3“ 6“ 1/2 0914641.1/64 1.0156 3“ 6“ 1/2 0914651.1/32 1.0312 3“ 6“ 1/2 0914861.3/64 1.0469 3“ 6“ 1/2 0914671.1/16 1.0625 3“ 6“ 1/2 0914681.5/64 1.0781 3“ 6“ 1/2 0914691.3/32 1.0938 3“ 6“ 1/2 0914701.7/64 1.1094 3“ 6“ 1/2 0914711.1/8 1.1250 3“ 6“ 1/2 0914721.9/64 1.1406 3“ 6“ 1/2 0914731.5/32 1.1562 3“ 6“ 1/2 0914871.11/64 1.1719 3“ 6“ 1/2 0914741.3/16 1.1875 3“ 6“ 1/2 0914761.13/64 1.2031 3“ 6“ 1/2 0914751.7/32 1.2188 3“ 6“ 1/2 0914881.15/64 1.2344 3“ 6“ 1/2 0914771.1/4 1.2500 3“ 6“ 1/2 0914801.9/32 1.2812 3“ 6“ 1/2 0914791.5/16 1.3125 3“ 6“ 1/2 0914821.11/32 1.3438 3“ 6“ 1/2 0914971.3/8 1.3750 3“ 6“ 1/2 0914831.13/32 1.4062 3“ 6“ 1/2 0914921.7/16 1.4375 3“ 6“ 1/2 0914841.15/32 1.4688 3“ 6“ 1/2 0914951.1/2 1.5000 3“ 6“ 1/2 091485


● Foret queue dégagée de 12,7 mm● 1/2” reduced parallel shank drill● Silver & Deming, round shank


R57

R57

●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

33/64 0.5156 3“ 6“ 1/2 09153317/32 0.5312 3“ 6“ 1/2 09153435/64 0.5469 3“ 6“ 1/2 0915359/16 0.5625 3“ 6“ 1/2 09153637/64 0.5781 3“ 6“ 1/2 09153719/32 0.5938 3“ 6“ 1/2 09153839/64 0.6094 3“ 6“ 1/2 0915395/8 0.6250 3“ 6“ 1/2 09154041/64 0.6406 3“ 6“ 1/2 09154121/32 0.6562 3“ 6“ 1/2 09154243/64 0.6719 3“ 6“ 1/2 09154311/16 0.6875 3“ 6“ 1/2 09154445/64 0.7031 3“ 6“ 1/2 09154523/32 0.7188 3“ 6“ 1/2 09154647/64 0.7344 3“ 6“ 1/2 0915473/4 0.7500 3“ 6“ 1/2 09154849/64 0.7656 3“ 6“ 1/2 09154925/32 0.7812 3“ 6“ 1/2 09155051/64 0.7969 3“ 6“ 1/2 09155113/16 0.8125 3“ 6“ 1/2 09155253/64 0.8281 3“ 6“ 1/2 09155327/32 0.8438 3“ 6“ 1/2 09155455/64 0.8594 3“ 6“ 1/2 0915557/8 0.8750 3“ 6“ 1/2 09155657/64 0.8906 3“ 6“ 1/2 09155729/32 0.9062 3“ 6“ 1/2 09155859/64 0.9219 3“ 6“ 1/2 09155915/16 0.9375 3“ 6“ 1/2 091560

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

61/64 0.9531 3“ 6“ 1/2 09156131/32 0.9688 3“ 6“ 1/2 09156263/64 0.9844 3“ 6“ 1/2 0915631“ 1.0000 3“ 6“ 1/2 0915641.1/64 1.0156 3“ 6“ 1/2 0915651.1/32 1.0312 3“ 6“ 1/2 0915861.3/64 1.0469 3“ 6“ 1/2 0915671.1/16 1.0625 3“ 6“ 1/2 0915681.5/64 1.0781 3“ 6“ 1/2 0915691.3/32 1.0938 3“ 6“ 1/2 0915701.7/64 1.1094 3“ 6“ 1/2 0915711.1/8 1.1250 3“ 6“ 1/2 0915721.9/64 1.1406 3“ 6“ 1/2 0915731.5/32 1.1562 3“ 6“ 1/2 0915871.11/64 1.1719 3“ 6“ 1/2 0915751.3/16 1.1875 3“ 6“ 1/2 0915761.13/64 1.2031 3“ 6“ 1/2 0915771.7/32 1.2188 3“ 6“ 1/2 0915881.15/64 1.2344 3“ 6“ 1/2 0915791.1/4 1.2500 3“ 6“ 1/2 0915801.9/32 1.2812 3“ 6“ 1/2 0915891.5/16 1.3125 3“ 6“ 1/2 0915821.11/32 1.3438 3“ 6“ 1/2 0915921.3/8 1.3750 3“ 6“ 1/2 0915831.13/32 1.4062 3“ 6“ 1/2 0915951.7/16 1.4375 3“ 6“ 1/2 0915841.15/32 1.4688 3“ 6“ 1/2 0915981.1/2 1.5000 3“ 6“ 1/2 091585


● Foret queue dégagée de 12,7 mm● 1/2” reduced parallel shank drill● Silver & Deming, 3-flats


R58

R58

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

1“ 1.0000 3“ 6“ 3/4 0912641.1/32 1.0313 3“ 6“ 3/4 0912661.1/16 1.0625 3“ 6“ 3/4 0912681.3/32 1.0938 3“ 6“ 3/4 0912701.1/8 1.1250 3“ 6“ 3/4 0912721.5/32 1.1562 3“ 6“ 3/4 0912741.3/16 1.1875 3“ 6“ 3/4 0912761.7/32 1.2188 3“ 6“ 3/4 0912781.1/4 1.2500 3“ 6“ 3/4 0912801.9/32 1.2812 3“ 6“ 3/4 0912821.5/16 1.3125 3“ 6“ 3/4 0912841.11/32 1.3438 3“ 6“ 3/4 091286

■

●


d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

1.3/8 1.3750 3“ 6“ 3/4 0912881.13/32 1.4062 3“ 6“ 3/4 0912901.7/16 1.4375 3“ 6“ 3/4 0912921.15/32 1.4688 3“ 6“ 3/4 0912941.1/2 1.5000 3“ 6“ 3/4 0912961.9/16 1.5625 3“ 6“ 3/4 0912981.5/8 1.6250 3“ 6“ 3/4 0913001.11/16 1.6875 3“ 6“ 3/4 0913021.3/4 1.7500 3“ 6“ 3/4 0913041.13/16 1.8125 3“ 6“ 3/4 0913061.7/8 1.8750 3“ 6“ 3/4 0913081.15/16 1.9375 3“ 6“ 3/4 0913102“ 2.0000 3“ 6“ 3/4 091312

● Foret queue dégagée de 19,05 mm● 3/4” reduced parallel shank drill● Silver & Deming, round shank


HS

S S

peci

al P

urpo

se D

rills

Prod-

Icon1

Photo

Icon2

Icon3

Icon4

Icon5

Icon6

Icon7

Icon8

Icon9

Icon10

Icon11

Range-Dim

Laun-chLogo-



1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








HS

S S

peci

al P

urpo

se D

rills

HSS Special Purpose Drills

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

Application Material Groups (AMG) With Examples

1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Determine your Workpiece Material. Select Material from the AMG Chart below. Use the icons to find Depth of Cut and other Product Features. Find the Surface Feet Per Minute (SFM) and Alpha Code. example: 279 U 279 = SFM U = Alpha Code to find your Feed Rate

To calculate Cutting Feed Rate, refer to chart on page 9-10.



Style:

Tool Material:

Finish/Coating:


Depth of Cut:

Tool Length:

Helix:

Shank:

Point Angle:

Point Style:Special Standard:

166

1

23

4

1

2

3


D000 D444

168 169

■125D

■298H■298H■226F●200D

D555

170

■298H■298H■226F●200D


HS

S S

peci

al P

urpo

se D

rills

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


HSS Special Purpose Drills (con‘t)

HS

S S

peci

al P

urpo

se D

rills

167

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.1

76HA 76LO B76HA A217A218 A221 A236

171 171 171 172 173 173■115I ■115I ■115I ■115I ■115I ■115I■98I ■98I ■98I ■98I ■98I ■98I■82G ■82G ■82G ■82G ■82G ■82G■66F ■66F ■66F ■66F ■66F ■66F●43E ●43E ●43E ●43E ●43E ●43E●30D ●30D ●30D ●30D ●30D ●30D

●49E ●49E ●49E ●49E ●49E ●49E●26G ●26G ●26G ●26G ●26G ●26G●33C ●33C ●33C ●33C ●33C ●33C

■98I ■98I ■98I ■98I ■98I ■98I■79F ■79F ■79F ■79F ■79F ■79F●66E ●66E ●66E ●66E ●66E ●66E●46E ●46E ●46E ●46E ●46E ●46E●79F ●79F ●79F ●79F ●79F ●79F●43D ●43D ●43D ●43D ●43D ●43D●23B ●23B ●23B ●23B ●23B ●23B●33G ●33G ●33G ●33G ●33G ●33G●16E ●16E ●16E ●16E ●16E ●16E●13A ●13A ●13A ●13A ●13A ●13A●115G ●115G ●115G ●115G ●115G ●115G●108I ●108I ●108I ●108I ●108I ●108I●89H ●89H ●89H ●89H ●89H ●89H●52G ●52G ●52G ●52G ●52G ●52G●108J ●108J ●108J ●108J ●108J ●108J●98I ●98I ●98I ●98I ●98I ●98I●89H ●89H ●89H ●89H ●89H ●89H●72H ●72H ●72H ●72H ●72H ●72H●98J ●98J ●98J ●98J ●98J ●98J●92H ●92H ●92H ●92H ●92H ●92H●46F ●46F ●46F ●46F ●46F ●46F●10B ●10B ●10B ●10B ●10B ●10B

Spotting Drills

SP Series

174■115E■98E■89C●69C●46C●33B

●52C●30D●33B

●105E●89C●66C●52B●89C●39B●23A●43D●26C●13A■89D■108E■89D■52D■108E■98E●98D●82D●98F●115E●56D●39A

ATR41

175

●82F●66F■43E■30D

●49E■26G■30C

●98I●79F●66E■46E■75F■39D■20B■33G●20E●10A

●89H■52G

■79F

●10B

60B

176

TS10 TS15 TS18

177■115J■98J■89G■69G●46F●33E

■52F●30H●33D

■105J■89G■66F●52F■89G■52E■26C●43H●26F●13B●118H●125J●89I●52H●108K●98J●98I●82I●98K●115I●56G●13C

SM8

176■115J■98J■89G■69G●46F●33E

■52F●30H●33D

■105J■89G■66F●52F■89G■52E■26C●43H●26F●13B●118H●125J●89I●52H●108K●98J●98I●82I●98K●115I●56G●13C

TS40 TS41

TS51 TS52 TS55

177 177■115J ■115J■98J ■98J■89G ■89G■69G ■69G●46F ●46F●33E ●33E

■52F ■52F●30H ●30H●33D ●33D

■105J ■105J■89G ■89G■66F ■66F●52F ●52F■89G ■89G■52E ■52E■26C ■26C●43H ●43H●26F ●26F●13B ●13B●118H ●118H●125J ●125J●89I ●89I●52H ●52H●108K ●108K●98J ●98J●98I ●98I●82I ●82I●98K ●98K●115I ●115I●56G ●56G●13C ●13C


D000

■

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

11/64 0.1719 1.1/2 3.1/2 0300113/16 0.1875 1.1/2 3.1/2 03001213/64 0.2031 1.3/4 3.3/4 0300137/32 0.2188 1.3/4 3.3/4 03001415/64 0.2344 2“ 4“ 0300151/4 0.2500 2“ 4“ 03001617/64 0.2656 2.1/4 4.1/4 0300179/32 0.2812 2.1/4 4.1/4 03001819/64 0.2969 2.1/2 4.1/2 0300195/16 0.3125 2.1/2 4.1/2 03002021/64 0.3281 2.3/4 4.3/4 03002111/32 0.3438 2.3/4 4.3/4 03002223/64 0.3594 3“ 5“ 0300233/8 0.3750 3“ 5“ 03002425/64 0.3906 3“ 5.1/4 03002513/32 0.4062 3“ 5.1/4 030026

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

27/64 0.4219 3“ 5.1/2 0300277/16 0.4375 3“ 5.1/2 03002829/64 0.4531 3.1/4 5.3/4 03002915/32 0.4688 3.1/4 5.3/4 03003031/64 0.4844 3.1/2 6“ 0300311/2 0.5000 3.1/2 6“ 03003217/32 0.5312 3.1/2 6“ 0300349/16 0.5625 3.1/2 6“ 03003619/32 0.5938 4“ 7“ 0300385/8 0.6250 4“ 7“ 03004021/32 0.6562 4.1/2 7.1/2 03004211/16 0.6875 4.1/2 7.1/2 03004423/32 0.7188 4.3/4 8“ 0300463/4 0.7500 4.3/4 8“ 030048


● Foret de matrice● Die drill ● Taladro del dado

■ = EXCELLENT FOR APPLICATION ● = GOOD FOR APPLICATION

● Carbide-tipped


● Foret court

D444

D444

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

32 0.1160 1.5/8 2.3/4 0346321/8 0.1250 1.5/8 2.3/4 03440830 0.1285 1.5/8 2.3/4 03463029 0.1360 1.3/4 2.7/8 0346299/64 0.1406 1.3/4 2.7/8 03440925 0.1495 1.7/8 3“ 0346255/32 0.1562 2“ 3.1/8 03441021 0.1590 2.1/8 3.1/4 03462120 0.1610 2.1/8 3.1/4 03462019 0.1660 2.1/8 3.1/4 03461918 0.1695 2.1/8 3.1/4 03461811/64 0.1719 2.1/8 3.1/4 03441117 0.1730 2.3/16 3.3/8 03461715 0.1800 2.3/16 3.3/8 03461514 0.1820 2.3/16 3.3/8 03461413 0.1850 2.5/16 3.1/2 0346133/16 0.1875 2.5/16 3.1/2 03441211 0.1910 2.5/16 3.1/2 03461110 0.1935 2.7/16 3.5/8 0346109 0.1960 2.7/16 3.5/8 0346097 0.2010 2.7/16 3.5/8 03460713/64 0.2031 2.7/16 3.5/8 0344133 0.2130 2.1/2 3.3/4 0346037/32 0.2188 2.1/2 3.3/4 0344141 0.2280 2.5/8 3.7/8 03460115/64 0.2344 2.5/8 3.7/8 034415B 0.2380 2.3/4 4“ 034502C 0.2420 2.3/4 4“ 034503E 0.2500 2.3/4 4“ 0345051/4 0.2500 2.3/4 4“ 034416F 0.2570 2.7/8 4.1/8 034506G 0.2610 2.7/8 4.1/8 034507

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

17/64 0.2656 2.7/8 4.1/8 034417H 0.2660 2.7/8 4.1/8 034508I 0.2720 2.7/8 4.1/8 034509J 0.2770 2.7/8 4.1/8 034510K 0.2810 2.15/16 4.1/4 0345119/32 0.2812 2.15/16 4.1/4 034418L 0.2900 2.15/16 4.1/4 03451219/64 0.2969 3.1/16 4.3/8 034419N 0.3020 3.1/16 4.3/8 0345145/16 0.3125 3.3/16 4.1/2 034420O 0.3160 3.3/16 4.1/2 034515P 0.3230 3.5/16 4.5/8 03451621/64 0.3281 3.5/16 4.5/8 034421Q 0.3320 3.7/16 4.3/4 034517R 0.3390 3.7/16 4.3/4 03451811/32 0.3438 3.7/16 4.3/4 034422S 0.3480 3.1/2 4.7/8 034519T 0.3580 3.1/2 4.7/8 03452023/64 0.3594 3.1/2 4.7/8 034423U 0.3680 3.5/8 5“ 0345213/8 0.3750 3.5/8 5“ 03442425/64 0.3906 3.3/4 5.1/8 03442513/32 0.4062 3.7/8 5.1/4 034426Z 0.4130 3.7/8 5.1/4 03452627/64 0.4219 3.15/16 5.3/8 0344277/16 0.4375 4.1/16 5.1/2 03442829/64 0.4531 4.3/16 5.5/8 03442915/32 0.4688 4.5/16 5.3/4 03443031/64 0.4844 4.3/8 5.7/8 0344311/2 0.5000 4.1/2 6“ 034432

● Jobber drill ● Broca , serie corta● Carbide-tipped



● Foret queue

D555

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/8 0.1250 2.3/4 5.1/8 0355089/64 0.1406 3“ 5.3/8 0355095/32 0.1562 3“ 5.3/8 03551011/64 0.1719 3.3/8 5.3/4 0355113/16 0.1875 3.3/8 5.3/4 03551213/64 0.2031 3.5/8 6“ 0355137/32 0.2188 3.5/8 6“ 03551415/64 0.2344 3.3/4 6.1/8 0355151/4 0.2500 3.3/4 6.1/8 03551617/64 0.2656 3.7/8 6.1/4 0355179/32 0.2812 3.7/8 6.1/4 03551819/64 0.2969 4“ 6.3/8 0355195/16 0.3125 4“ 6.3/8 03552021/64 0.3281 4.1/8 6.1/2 03552111/32 0.3438 4.1/8 6.1/2 03552223/64 0.3594 4.1/4 6.3/4 0355233/8 0.3750 4.1/4 6.3/4 03552425/64 0.3906 4.3/8 7“ 03552513/32 0.4062 4.3/8 7“ 03552627/64 0.4219 4.5/8 7.1/4 0355277/16 0.4375 4.5/8 7.1/4 03552829/64 0.4531 4.3/4 7.1/2 035529

● Taper length ● Broca de mango cónico

■

●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

15/32 0.4688 4.3/4 7.1/2 03553031/64 0.4844 4.3/4 7.3/4 0355311/2 0.5000 4.3/4 7.3/4 03553233/64 0.5156 4.3/4 8“ 03553317/32 0.5312 4.3/4 8“ 03553435/64 0.5469 4.7/8 8.1/4 0355359/16 0.5625 4.7/8 8.1/4 03553637/64 0.5781 4.7/8 8.3/4 03553719/32 0.5938 4.7/8 8.3/4 03553839/64 0.6094 4.7/8 8.3/4 0355395/8 0.6250 4.7/8 8.3/4 03554041/64 0.6406 5.1/8 9“ 03554121/32 0.6562 5.1/8 9“ 03554243/64 0.6719 5.3/8 9.1/4 03554311/16 0.6875 5.3/8 9.1/4 03554445/64 0.7031 5.5/8 9.1/2 03554523/32 0.7188 5.5/8 9.1/2 03554647/64 0.7344 5.7/8 9.3/4 0355473/4 0.7500 5.7/8 9.3/4 03554813/16 0.8125 6.1/8 10“ 0355527/8 0.8750 6.1/8 10“ 03555615/16 0.9375 6.1/8 10.3/4 0355601“ 1.0000 6.3/8 11“ 035564

● Carbide-tipped



76LO

B76HA

B76HA

Nr.

d1Inch

l2Inch

l1Inch

d2ØInch

d3ØInch

EDP #ore-Code

11 3/64 3/64 1.1/4 1/8 0.100 09761112 1/16 1/16 1.7/8 3/16 0.150 09761213 3/32 3/32 2“ 1/4 0.200 09761314 7/64 7/64 2.1/8 5/16 0.250 097614

Nr.

d1Inch

l2Inch

l1Inch

d2ØInch

d3ØInch

EDP #ore-Code

15 5/32 5/32 2.3/4 7/16 0.350 09761516 3/16 3/16 3“ 1/2 0.400 09761617 7/32 7/32 3.1/4 5/8 0.500 09761718 1/4 1/4 3.1/2 3/4 0.600 097618

● Bell type ● 60°/120° included countersink angle

● Extra length


76HA

■●

Nr.

d1ØInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

000 0.020 0.030 1.1/4 1/8 09763000 0.025 0.030 1.1/8 1/8 0976200 1/32 0.038 1.1/8 1/8 0976101 3/64 3/64 1.1/4 1/8 0976012 5/64 5/64 1.7/8 3/16 0976023 7/64 7/64 2“ 1/4 097603

76LO

Nr.

d1ØInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

1 3/64 3/64 3“ 1/8 0977131 3/64 3/64 4“ 1/8 0977143 5/64 5/64 4“ 3/16 0977242 5/64 5/64 5“ 3/16 0977252 7/64 7/64 4“ 1/4 0977343 7/64 7/64 5“ 1/4 0977354 1/8 1/8 4“ 5/16 0977444 1/8 1/8 5“ 5/16 097745

Nr.

d1ØInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

4 1/8 1/8 6“ 5/16 0977465 3/16 3/16 5“ 7/16 0977555 3/16 3/16 6“ 7/16 0977566 7/32 7/32 5“ 1/2 0977656 7/32 7/32 6“ 1/2 0977667 1/4 1/4 6“ 5/8 0977768 5/16 5/16 6“ 3/4 097786

● Center drill ● Brocas de Centrar

76HA● Regular length

● Foret à centrer● Center drill ● Brocas de Centrar

● Foret à centrer● Center drill ● Brocas de Centrar

4 1/8 1/8 2.1/8 5/16 097604Nr.

d1ØInch

l2Inch

l1Inch

d2ØInch

EDP #ore-Code

4 1/8 1/8 2.1/8 5/16 0976045 3/16 3/16 2.3/4 7/16 0976056 7/32 7/32 3“ 1/2 0976067 1/4 1/4 3.1/4 5/8 0976078 5/16 5/16 3.1/2 3/4 097608




A217

■●

Nr.

d1dec.Inch

l2Inch

l1ch

d2ØInch

maxTmm Stock #

EDP #ore-Code

1 0.0469 3/8 1.1/4 3/64 2.33 0239216 A217N12 0.0781 33/64 1.7/8 5/64 3.58 0239223 A217N23 0.1094 5/8 2“ 7/64 4.83 0239230 A217N34 0.1250 45/64 2.1/8 1/8 5.92 0239247 A217N4

Nr.

d1dec.Inch

l2Inch

l1ch

d2ØInch

maxTmm Stock #

EDP #ore-Code

5 0.1875 1“ 2.3/4 3/16 8.41 0239254 A217N56 0.2188 1“ 3“ 7/32 9.67 0239261 A217N67 0.2500 1.13/16 3.1/4 1/4 11.83 0239278 A217N78 0.3125 1.11/32 3.1/2 5/16 14.33 0239285 A217N8

Nr.

d1dec.Inch

l2Inch

l1Inch

d2ØInch

maxTmm Stock #

EDP #ore-Code

1 0.0469 3/8 1.1/4 3/64 2.18 0239292 A218N12 0.0781 33/64 1.7/8 5/64 3.37 0239308 A218N23 0.1094 5/8 2“ 7/64 4.57 0239315 A218N34 0.1250 45/64 2.1/8 1/8 5.56 0239322 A218N4

Nr.

d1dec.Inch

l2Inch

l1Inch

d2ØInch

maxTmm Stock #

EDP #ore-Code

5 0.1875 1“ 2.3/4 3/16 7.94 0239339 A218N56 0.2188 1“ 3“ 7/32 9.13 0239346 A218N67 0.2500 1.13/64 3.1/4 1/4 11.11 0239353 A218N78 0.3125 1.11/32 3.1/2 516 13.50 0239360 A218N8

A218

A217● Center Drill ● Brocas de Centrar

■

●

A218● Foret à centrer● Center Drill ● Brocas de Centrar



A221

Nr.

d1ØInch

d1dec.Inch

l2Inch

l1Inch

d2ØInch

maxTmm Stock #

EDP #ore-Code

00 0.025 0.0250 0.030 1.1/8 1/8 2.83 0241851 A221N000 1/32 0.0312 0.038 1.1/8 1/8 2.83 0241844 A221N01 3/64 0.0469 3/64 1.1/4 1/8 2.71 0241868 A221N12 5/64 0.0781 5/64 1.7/8 3/16 4.19 0241875 A221N23 7/64 0.1094 7/64 2“ 1/4 5.47 0241882 A221N34 1/8 0.1250 1/8 2.1/8 5/16 6.90 0241899 A221N4

Nr.

d1ØInch

d1dec.Inch

l2Inch

l1Inch

d2ØInch

maxTmm Stock #

EDP #ore-Code

5 3/16 0.1875 3/16 2.3/4 7/16 9.86 0241905 A221N56 7/32 0.2188 7/32 3“ 1/2 11.35 0241912 A221N67 1/4 0.2500 1/4 3.1/4 5/8 14.20 0241929 A221N78 5/16 0.3125 5/16 3.1/2 3/4 17.16 0241936 A221N8

■

●

A236

Nr.

d2ØInch

d1ØInch

l2Inch

l1Inch

maxTmm Stock #

EDP #ore-Code

00 1/8 0.025 0.030 1.1/8 2.83 0387931 A236N000 1/8 1/32 0.038 1.1/8 2.83 0387948 A236N01 1/8 3/64 3/64 1.1/4 2.71 0387955 A236N12 3/16 5/64 5/64 1.7/8 4.19 0387962 A236N23 1/4 7/64 7/64 2“ 5.47 0387979 A236N34 5/16 1/8 1/8 2.1/8 6.90 0387986 A236N4

Nr.

d2ØInch

d1ØInch

l2Inch

l1Inch

maxTmm Stock #

EDP #ore-Code

5 7/16 3/16 3/16 2.3/4 9.86 0387993 A236N56 1/2 7/32 7/32 3“ 11.35 0388006 A236N67 5/8 1/4 1/4 3.1/4 14.20 0388013 A236N78 3/4 5/16 5/16 3.1/2 17.16 0388020 A236N89 7/8 11/32 11/32 3.9/16 20.01 0388037 A236N9


■

●




Spotting Drills ● Forets de dessoudage● Spotting Drill ● Broca para centrados

■●

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/4 0.2500 3/4 2.1/2 0879503/8 0.3750 1.1/8 3.1/8 0879511/2 0.5000 1.3/8 3.3/4 0879525/8 0.6250 1.5/8 4.3/8 0879533/4 0.7500 1.7/8 5“ 0879541“ 1.0000 2.1/4 6“ 087955

SPS-120° Short Length SPSG-120° Short Lengthd1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/4 0.2500 3/4 2.1/2 0879563/8 0.3750 1.1/8 3.1/8 0879571/2 0.5000 1.3/8 3.3/4 0879585/8 0.6250 1.5/8 4.3/8 0879593/4 0.7500 1.7/8 5“ 0879601“ 1.0000 2.1/4 6“ 087961

SPR-120° Regular Length SPRG-120° Regular Length

1/4 0.2500 3/4 4“ 0879623/8 0.3750 1.1/8 5“ 0879631/2 0.5000 1.3/8 6“ 0879645/8 0.6250 1.5/8 7“ 0879653/4 0.7500 1.7/8 8“ 0879661“ 1.0000 2.1/4 8“ 087967

1/4 0.2500 3/4 4“ 0879683/8 0.3750 1.1/8 5“ 0879691/2 0.5000 1.3/8 6“ 0879705/8 0.6250 1.5/8 7“ 0879713/4 0.7500 1.7/8 8“ 0879721“ 1.0000 2.1/4 8“ 087973

SPL-120° Long Length

1/4 0.2500 3/4 6“ 0879743/8 0.3750 1.1/8 7“ 0879751/2 0.5000 1.3/8 8“ 0879765/8 0.6250 1.5/8 9“ 0879773/4 0.7500 1.7/8 10“ 0879781“ 1.0000 2.1/4 10“ 087979

SPLG-120° Long Length

1/4 0.2500 3/4 6“ 0879803/8 0.3750 1.1/8 7“ 0879811/2 0.5000 1.3/8 8“ 0879825/8 0.6250 1.5/8 9“ 0879833/4 0.7500 1.7/8 10“ 0879841“ 1.0000 2.1/4 10“ 087985

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code




SPSG-90° Short Length

1/4 0.2500 3/4 2.1/2 0879063/8 0.3750 1.1/8 3.1/8 0879071/2 0.5000 1.3/8 3.3/4 0879085/8 0.6250 1.5/8 4.3/8 0879093/4 0.7500 1.7/8 5“ 0879101“ 1.0000 2.1/4 6“ 087911

SPS-90° Short Length

1/4 0.2500 3/4 2.1/2 0879003/8 0.3750 1.1/8 3.1/8 0879011/2 0.5000 1.3/8 3.3/4 0879025/8 0.6250 1.5/8 4.3/8 0879033/4 0.7500 1.7/8 5“ 0879041“ 1.0000 2.1/4 6“ 087905

Spotting Drills

SPL-90° Long Length

1/4 0.2500 3/4 6“ 0879243/8 0.3750 1.1/8 7“ 0879251/2 0.5000 1.3/8 8“ 0879265/8 0.6250 1.5/8 9“ 0879273/4 0.7500 1.7/8 10“ 0879281“ 1.0000 2.1/4 10“ 087929

SPLG-90° Long Length

1/4 0.2500 3/4 6“ 0879303/8 0.3750 1.1/8 7“ 0879311/2 0.5000 1.3/8 8“ 0879325/8 0.6250 1.5/8 9“ 0879333/4 0.7500 1.7/8 10“ 0879341“ 1.0000 2.1/4 10“ 087935

SPR-90° Regular Length

1/4 0.2500 3/4 4“ 0879123/8 0.3750 1.1/8 5“ 0879131/2 0.5000 1.3/8 6“ 0879145/8 0.6250 1.5/8 7“ 0879153/4 0.7500 1.7/8 8“ 0879161“ 1.0000 2.1/4 8“ 087917

SPRG-90° Regular Length

1/4 0.2500 3/4 4“ 0879183/8 0.3750 1.1/8 5“ 0879191/2 0.5000 1.3/8 6“ 0879205/8 0.6250 1.5/8 7“ 0879213/4 0.7500 1.7/8 8“ 0879221“ 1.0000 2.1/4 8“ 087923

ATR41

d1ØNo.

d1ØInch

d2ØInch

l2Inch

l1Inch

d3ØInch

# of Flutes

EDP #ore-Code

1 0.0810 0.0980 13/16 2“ 0.0980 3 0417012 0.1100 0.1280 7/8 2.1/4 0.1280 3 041702

d1ØNo.

d1ØInch

d2ØInch

l2Inch

l1Inch

d3ØInch

# of Flutes

EDP #ore-Code

3 0.1650 0.1875 1.1/16 2.1/2 0.1875 3 0417034 0.2240 0.2500 1.1/4 2.3/4 0.2500 4 041704

● Aircraft extension drill● Right-hand helix (taper 1/4” per foot) ● Notched point

● Broca extralarga para la industria Aeronáutica

● Forets de dessoudage● Spotting drill ● Broca para centrados

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code


d3

d2


60B● Ebauche pour foret

60B

d1ØInch

d1dec.Inch

l1Inch

EDP #ore-Code

1/32 0.0312 1.3/8 0190023/64 0.0469 1.3/4 0190031/16 0.0625 1.7/8 0190045/64 0.0781 2“ 0190053/32 0.0937 2.1/4 0190067/64 0.1094 2.5/8 0190071/8 0.125 2.3/4 0190089/64 0.1406 2.7/8 0190095/32 0.1562 3.1/8 01901011/64 0.1719 3.1/4 0190113/16 0.1875 3.1/2 01901213/64 0.2031 3.5/8 0190137/32 0.2187 3.3/4 01901415/64 0.2344 3.7/8 0190151/4 0.25 4“ 01901617/64 0.2656 4.1/8 0190179/32 0.2812 4.1/4 01901819/64 0.2969 4.3/8 0190195/16 0.3125 4.1/2 01902021/64 0.3281 4.5/8 01902111/32 0.3437 4.3/4 01902223/64 0.3594 4.7/8 019023

d1ØInch

d1dec.Inch

l1Inch

EDP #ore-Code

3/8 0.375 5“ 01902425/64 0.3906 5.1/8 01902513/32 0.4062 5.1/4 01902627/64 0.4219 5.3/8 0190277/16 0.4375 5.1/2 01902829/64 0.4531 5.5/8 01902915/32 0.4687 5.3/4 01903031/64 0.4844 5.7/8 0190311/2 0.5 6“ 01903217/32 0.5312 6“ 0190349/16 0.5625 6“ 01903619/32 0.5938 6“ 0190385/8 0.625 6“ 01904021/32 0.6562 6“ 01904211/16 0.6875 6“ 01904423/32 0.7188 6“ 0190463/4 0.75 6“ 01904813/16 0.8125 6“ 0190527/8 0.875 6“ 01905615/16 0.9375 6“ 0190601“ 1 6“ 019064

● Drill blank ● Broca sin mecanizar

SM8● Foret extra-court - Double

d1Ø

d1Ømm

d1dec.Inch

l2Inch

l1ØInch

EDP #ore-Code

7/64 2.778 0.1094 1/2 1.7/8 0989071/8 3.175 0.1250 1/2 2“ 09890830 3.264 0.1285 1/2 2“ 0989309/64 3.572 0.1406 1/2 2“ 098909

d1Ø

d1Ømm

d1dec.Inch

l2Inch

l1ØInch

EDP #ore-Code

5/32 3.969 0.1562 1/2 2.1/16 0989103/16 4.762 0.1875 1/2 2.3/16 09891211 4.851 0.1910 1/2 2.1/4 0989111/4 6.350 0.2500 1/2 2.1/2 098916

● Stub drill ● Broca extra corta - Doble punta● Double end


d1ØInch

d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

F 0.257 9/16 1.1/2 045606

TS10d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/8 0.125 9/16 1.1/4 0457085/32 0.1562 9/16 1.1/2 0457103/16 0.1875 9/16 1.1/2 0457127/32 0.2188 9/16 1.1/2 0457141/4 0.25 9/16 1.1/4 045716

Short

TS41d1ØInch

d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

40 0.098 5/16 1/2 04584030 0.1285 5/16 9/16 04583020 0.161 5/16 9/16 04582011 0.191 5/16 9/16 04581110 0.1935 5/16 9/16 045810

TS40d1ØInch

d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

1/8 0.125 5/16 1/2 045808

Threaded Hex Shank Drills

d1ØInch

d1dec.Inch

l2

Inch

l1

Inch

EDP #ore-Code

40 0.098 9/16 1“ 04564030 0.1285 9/16 1.1/4 04563021 0.159 9/16 1.1/4 04562120 0.161 9/16 1.1/4 04562011 0.191 9/16 1.1/2 04561110 0.1935 9/16 1.1/4 045610

TS18 Short

TS15 Short

Stub

TS51d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

1/8 0.125 7/8 2.1/8 0179585/32 0.1562 1.1/8 2.1/8 0179603/16 0.1875 1.1/8 2.1/8 0179627/32 0.2188 1.1/8 2.1/8 0179641/4 0.25 1.1/8 2.1/8 017966

Long

TS55

TS52

40 0.0980 7/8 2.1/8 01794030 0.1285 1.1/8 2.1/8 01793021 0.1590 1.1/8 2.1/8 01792120 0.1610 1.1/8 2.1/8 01792011 0.1910 1.1/8 2.1/8 01791110 0.1935 1.1/8 2.1/8 017910

F 0.257 1.1/8 2.1/8 017990

Stub

Long

Long

● Threaded hex shank drills

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

d1ØInch

d1dec.Inch

l2Inch

l1Inch

EDP #ore-Code

● Type B


● Coffret de forets courts

Drill Sets

Style

Tool Type

# in Set

Sizes

EDP #

C13R10P R10P 13 1/16-1/4 x 64ths 090164C15R10P R10P 15 1/16-1/2 x 32nds 090163C21R10P R10P 21 1/16-3/8 x 64ths 090165C29R10P R10P 29 1/16-1/2 x 64ths 090162C20R18P R18P 20 61-80 090161C60R18P R18P 60 1-60 090101C26R15P R15P 26 A-Z 090126C15L10 L10 15 1/16-1/2 x 32nds, LEFT HAND 099955C29L10 L10 29 1/16-1/2 x 64ths, LEFT HAND 099935C115COMBP R10P, R18P, R15P 115 1/16-1/2 x 64ths, 1-60, A-Z 090123C114COMBP R10P, R18P, R10PM 114 1/16-1/2 x 64ths, 1-60, 1-13mm x .5 mm 090114C25R10PM R10PM 25 1mm-13mm x .5mm 099994C50R10PM R10PM 50 1mm-5.9mm x .1mm 099997

● Juego de Brocas, serie corta

Style

Tool Type

# in Set

Sizes

EDP #

C13R10 R10 13 1/16-1/4 x 64ths 099979C15R10 R10 15 1/16-1/2 x 32nds 099978C21R10 R10 21 1/16-3/8 x 64ths 099980C29R10 R10 29 1/16-1/2 x 64ths 099977C20R18 R18 20 61-80 099981C60R18 R18 60 1-60 099976C26R15 R15 26 A-Z 099983C115COMB R10, R18, R15 115 1/16-1/2 x 64ths, 1-60, A-Z 099982C114COMB R10, R18, 2AB 114 1/16-1/2 x 64ths,1-60, 1-13mm x .5 mm 099990

Style Tool Type # in Set Sizes EDP #

C13R10CO R10CO 13 1/16-1/2 x 64ths 099944C15R10CO R10CO 15 1/16-1/2 x 32nds 090291C21R10CO R10CO 21 1/16-3/8 x 64ths 099701C29R10CO R10CO 29 1/16-1/2 x 64ths 090290C60R18CO R18CO 60 1-60 090600C26R15CO R15CO 26 A-Z 090292C115COMBC R10CO, R18CO, R15CO 115 1/16-1/2 x 64ths, 1-60, A-Z 099706C114COMBC R10CO, R18CO, 2ACO 114 1/16-1/2 x 64ths, 1-60, 1-13mm x .5 mm 099705

Jobber Drill Sets● Drill Sets



C29HX10 HX10 29 1/16-1/2 x 64ths 091010

A190

Style Tool Type # in Set Sizes Stock # EDP #

3 A100 21 1/16 - 3/8 x 1/64 0179413 A1903200 A100 24 1.0 mm - 10.5 mm x 0.5 mm + 3.3 - 4.2 - 6.8 - 10.2 mm 0030530 A190200201 A100 19 1.0 mm - 10.0 mm x 0.5 mm 0030547 A190201202 A100 51 1.0 mm - 6.0 mm x 0.1 mm 0030554 A190202203 A100 41 6.0 mm - 10.0 mm x 0.1 mm 0030561 A190203204 A100 25 1.0 mm - 13.0 mm x 0.5 mm 0030578 A190204

Drill Sets

A097


18 A012 29 1/16 - 1/2 x 1/64 0574317 A0971820 A012 15 1/16 - 1/2 x 1/32 0574348 A0972060 A012 13 1/16 - 1/4 x 1/64 0574355 A0976012 A012 60 Nr.1 - Nr.60 0574324 A0971214 A012 26 A - Z 0574331 A0971430 A012 115 1/16 - 1/2 x 1/64, Nr.1 - Nr.60, A-Z 0574362 A09730

● Coffret de forets courts ● Juego de Brocas, serie corta

Jobber Drill Sets● Drill Sets

A191


31M A100 20 0.3 mm - 1.0 mm x 0.05 mm + 0.38 - 0.52 - 0.58 - 0.78 - 0.82 mm 0149133 A19131M61/80 A100 20 Nr.61 - Nr.80 0179499 A19161-80413 A100 13 1.5 mm - 6.5 mm x 0.5 mm + 3.3 - 4.2 mm 0030608 A191413419 A100 19 1.0 mm - 10.0 mm x 0.5 mm 0030615 A191419

Drill Sets● Coffret de forets courts ● Juego de Brocas, serie corta● Drill Sets



C29R40 R40 29 1/16-1/2 x 64ths 090170C60R41 R41 60 1-60 090174C26R42 R42 26 A-Z 090173

Stub Drill Sets


C29R40C R40C 29 1/16-1/2 x 64ths 099903C60R41C R41C 60 1-60 099930


C29M40CO M40CO 29 1/16-1/2 x 64ths 099962C60M41CO M41CO 60 1-60 099960C26M42CO M42CO 26 A-Z 099961



C8R56CO R56CO 8 1/2“ Reduced Shank, 9/16-1“ x16ths, Silver & Deming

090328

Style Tool Type # in Set

Sizes EDP #

C16A209 209 16 33/64-3/4 x 64ths 090131C16B209 209 16 49/64-1“ x 64ths 090133

Taper Shank Drill Sets

Reduced Shank Drill Sets


C8R56 R56 8 1/2“ Reduced Shank, 9/16-1“ x 16ths, S&D 090556C8R57 R57 8 1/2“ Reduced Shank, 9/16-1“ x 16ths, S&D 090558C33R56 R56 33 1/2“ Reduced Shank, 1/2-1“x 64ths, S&D 090231

● Coffret de forets courts● Drill Sets ● Juego de Brocas, serie corta

Drill Sets

Taper Length Drill Sets


C29R51 R51 29 1/16-1/2 x 64ths 090154C60R52 R52 60 1-60 090155


Tap Table of Contents

Style

Standard

Thread Designation

Description

Finish

Page No.

Straight Flute1500(UNC) ANSI UNC Hand Tap Bright1500(UNF) ANSI UNF Hand Tap Bright1500(UNS) ANSI UNS Hand Tap Bright1500A(UNC) ANSI UNC Hand Tap ST1500A(UNF) ANSI UNF Hand Tap ST1500L(UNC) ANSI UNC Left Hand Bright1500L(UNF) ANSI UNF Left Hand Bright1500L(UNS) ANSI UNS Left Hand Bright1500OV(UNC) ANSI UNC Hand Tap, oversize .005” Bright1500S ANSI Sets Hand Tap set, 3-piece Bright1505(UNC) ANSI UNC Hand Tap, 8-Pitch Bright1505(UNS) ANSI UNS Hand Tap, 8-Pitch Bright1508(UNC) ANSI UNC Hand Tap, Optional Flutes Bright1508(UNF) ANSI UNF Hand Tap, Optional Flutes Bright1519(UNC) ANSI UNC Hand Tap, Pulley style Bright1528(UNC) ANSI UNC Hand Tap Bright1528(UNF) ANSI UNF Hand Tap Bright1528(UNS) ANSI UNS Hand Tap Bright1528S ANSI Sets Hand Tap set, 3-piece Bright1572(UNC) ANSI UNC Hand Tap, Screw Thread Insert (STI) Bright1572(UNF) ANSI UNF Hand Tap, Screw Thread Insert (STI) Bright1595(UNC) ANSI UNC Hand Tap, Optional Flutes Bright1595(UNF) ANSI UNF Hand Tap, Optional Flutes Bright1599(M) ANSI Metric Hand Tap, Cast iron Nitride, ST1599(UNC) ANSI UNC Hand Tap, Cast iron Nitride, ST1599(UNF) ANSI UNF Hand Tap, Cast iron Nitride, ST1599SB(M) ANSI Metric Hand Tap, Cast Iron, Semi-Bottoming Nitride, ST1600(UNC) ANSI UNC Hand Tap, Cast iron Nitride, ST1600(UNF) ANSI UNF Hand Tap, Cast iron Nitride, ST1700(M) ANSI Metric Hand Tap Bright1700S ANSI Metric Hand Tap set, 3-piece BrightE053 ISO Metric MTT-X, Machine Tap TiAlNE054 ISO Metric MTT-X, Machine Tap TiAlNE059 ISO UNC MTT-X, Machine Tap TiAlNE061 ANSI UNC MTT, Hand Tap GoldE071 ANSI UNF MTT, Hand Tap GoldE500 ISO Metric Machine Tap, Straight Flute BrightE501 ISO Metric Machine Tap, Straight Flute BrightE513 ISO Metric Machine Tap, Straight Flute BrightT100 DIN Metric Carbide TiAlNT110 DIN Metric Carbide TiAlNTN1500(UNC) ANSI UNC Hand Tap TiNTN1500(UNF) ANSI UNF Hand Tap TiNU1511 ANSI UNC Hand Tap, Nut style Bright

220 222 223 228 228 230 230 231 231 224 234 235 232 232 238 216 218 218 219 236 237 233 233 241 240 240 241 239 239 225 227 242 243 242 212 214 244 247 248 211 211 229 229 237

Threading with Taps Icon Guide for TapsTap Drill Sizes for Metric M-Profile Screw Threads Tap Drill Sizes for Forming TapsForming Tap Drill Sizes for Self-Locking ThreadsTap Projection and Hole Size for Pipe TapsTap Size Recommendations for Classes 2B and 3BUnified Screw Thread LimitsTapping Speeds

Tap Technical Charts202 203 204 205 206 207 208 209 210

Page



Style

Standard

Thread Designation

Description

Finish

Page No.

Spiral Point1534(UNC) ANSI UNC Relieved Style Bright1534(UNF) ANSI UNF Relieved Style Bright1534NE(UNC) ANSI UNC Extension Non-Relieved Style Bright1534NE(UNF) ANSI UNF Extension Non-Relieved Style Bright1534NR(UNC) ANSI UNC Non-Relieved Style Bright1534NR(UNF) ANSI UNF Non-Relieved Style Bright1534NR(UNS) ANSI UNS Non-Relieved Style Bright1578(UNC)(UNF) ANSI UNC Screw Thread Insert (STI) Bright1585(UNC) ANSI UNC Relieved Style Bright1585(UNF) ANSI UNF Relieved Style Bright1585A(UNC) ANSI UNC Relieved Style ST1585A(UNF) ANSI UNF Relieved Style ST1585NR(UNC) ANSI UNC Non-Relieved Style Bright1585NR(UNF) ANSI UNF Non-Relieved Style Bright1585OV(UNC) ANSI UNC Relieved Style, .005” oversize Bright1593(UNC)(UNF) ANSI UNC Relieved Style, .003”/.0035 oversize Bright1634(UNC) (UNF) ANSI UNC Relieved Style Gold1785M ANSI Metric Relieved Style Bright1785NR ANSI Metric Non-Relieved Style Bright1985(UNC) ANSI UNC Relieved Style, DDX, High Hook ST1985(UNF) ANSI UNF Relieved Style, DDX, High Hook STE000 ISO Metric MTT-X, Machine Tap GoldE001 ISO Metric MTT-X, Machine Tap STE005 ANSI Metric MTT-X, Machine Tap GoldE006 ANSI Metric MTT-X, Machine Tap STE010 ISO Metric MTT-X, Machine Tap GoldE011 ISO Metric MTT-X, Machine Tap STE015 ANSI Metric MTT-X, Machine Tap GoldE016 ANSI Metric MTT-X, Machine Tap STE025 ANSI UNC MTT-X, Machine Tap GoldE026 ANSI UNC MTT-X, Machine Tap STE035 ANSI UNF MTT-X, Machine Tap GoldE036 ANSI UNF MTT-X, Machine Tap STE045 ISO Metric MTT-X, Machine Tap STE046 ISO Metric MTT-X, Machine Tap GoldE049 ISO Metric MTT-X, Machine Tap GoldE055 ISO UNC MTT-X, Machine Tap STE057 ISO UNC MTT-X, Machine Tap GoldE060 ISO UNF MTT-X, Machine Tap STTN1534(UNC) ANSI UNC Relieved Style TiNTN1534(UNF) ANSI UNF Relieved Style TiNTN1585 (UNC) ANSI UNC Relieved Style TiNTN1585(UNF) ANSI UNF Relieved Style TiNTN1785 ANSI Metric Relieved Style TiN

266 267 283 283 276 277 277 284 270 271 272 272 278 279 281 280 268 275 282 274 274 259 260 256 257 261 262 258 258 252 254 253 255 263 264 263 264 265 265 269 269 273 273 275

(con‘t)



Style

Standard

Thread Designation

Description

Finish

Page No.

Spiral Flute1582(UNC) ANSI UNC Machine Tap Bright1582(UNF) ANSI UNF Machine Tap Bright1586(UNC) ANSI UNC Machine Tap Bright1586(UNF) ANSI UNF Machine Tap Bright1587(UNC) ANSI UNC Machine Tap, High Spiral Helicut, 52° Bright1587(UNF) ANSI UNF Machine Tap, High Spiral Helicut, 52° Bright1588(UNC) ANSI UNC Machine Tap, High Spiral Helicut, 52° Bright1588(UNF) ANSI UNF Machine Tap, High Spiral Helicut, 52° Bright1590(UNC) ANSI UNC Heavy-Duty, High Spiral Flute ST1590(UNF) ANSI UNF Heavy-Duty, High Spiral Flute ST1591(UNC) ANSI UNC Heavy-Duty, High Spiral Flute ST1591(UNF) ANSI UNF Heavy-Duty, High Spiral Flute ST1788(M) ANSI Metric Machine Tap, High Spiral Helicut, 52° BrightE002 ISO Metric MTT-X, Machine Tap GoldE003 ISO Metric MTT-X, Machine Tap STE007 ANSI Metric MTT-X, Machine Tap GoldE008 ANSI Metric MTT-X, Machine Tap STE012 ISO Metric MTT-X, Machine Tap GoldE013 ISO Metric MTT-X, Machine Tap STE017 ANSI Metric MTT-X, Machine Tap GoldE018 ANSI Metric MTT-X, Machine Tap STE027 ANSI UNC MTT-X, Machine Tap GoldE028 ANSI UNC MTT-X, Machine Tap STE037 ANSI UNF MTT-X, Machine Tap GoldE038 ANSI UNF MTT-X, Machine Tap STE044 ISO Metric MTT-X, Machine Tap GoldE048 ISO Metric MTT-X, Machine Tap Super BE050 ISO Metric MTT-X, Machine Tap TiAlNE051 ISO Metric MTT-X, Machine Tap TiAlNE052 ISO Metric MTT-X, Machine Tap GoldE058 ISO UNC MTT-X, Machine Tap TiAlNE069 ANSI UNC MTT-X, Machine Tap STE079 ANSI UNF MTT-X, Machine Tap STE085 ANSI Metric MTT-X, Machine Tap ST

301 301 302 302 303 303 304 304 306 306 307 307 305 294 295 291 291 296 297 292 292 285 286 287 288 299 299 298 298 300 300 289 290 293

316 314 315 319 317 318 320 321 310 308 309 309 310 313 311 311 312 312

1580(M) ANSI Metric Rol-Rite™, Thread Forming Bright1580(UNC) ANSI UNC Rol-Rite™, Thread Forming Bright1580(UNF) ANSI UNF Rol-Rite™, Thread Forming Bright3300(M) ANSI Metric Rol-Form™, Thread Forming Bright3300(UNC) ANSI UNC Rol-Form™, Thread Forming Bright3300(UNF) ANSI UNF Rol-Form™, Thread Forming Bright3306E(UNC) ANSI UNC Rol-Form™, Extension Style, Thrd Form Bright3306E(UNF) ANSI UNF Rol-Form™, Extension Style, Thrd Form BrightE009 ANSI Metric MTT-X, Thread Forming TiNE029 ANSI UNC MTT-X, Thread Forming TiNE039 ANSI UNF MTT-X, Thread Forming TiNE064 ANSI UNC MTT-X, Thread Forming GoldE074 ANSI UNF MTT-X, Thread Forming GoldE080 ISO Metric MTT-X, Thread Forming DialubE094 ANSI Metric MTT-X, Thread Forming GoldE097 ISO Metric MTT-X, Thread Forming CrNE098 ISO Metric MTT-X, Thread Forming TiNE099 ISO Metric MTT-X, Thread Forming TiN

Thread Forming

(con‘t)


Tap Table of Contents Style

Standard

Thread Designation

Description

Finish

Page No.

Pipe Taps

Miscellaneous

1541(NPT) ANSI NPT Medium Hook, Straight Flute Bright1542(NPS) ANSI NPSM Straight, Regular Thread Bright1543(NPTF) ANSI NPTF Medium Hook, Straight Flute Bright1544(NPT) ANSI NPT Taper, Low Rake Angle Nitride1545(NPT) ANSI NPT Taper, High Hook Bright1545A(NPT) ANSI NPT Taper, High Hook ST1546(NPTF) ANSI NPTF Taper, High Hook Bright1548(NPT) ANSI NPT Taper, Medium Hook, 30° Spiral Flute Bright1549(NPTF) ANSI NPTF Taper, Medium Hook, 30° Spiral Flute Bright1567(NPTF) ANSI NPTF Taper, Interrupted Thread Bright1568(NPT) ANSI NPT Taper, Interrupted Thread Bright1592(NPSF) ANSI NPSF Straight, Dryseal, Regular Thread BrightE040 ISO G MTT-X, Machine Tap GoldE041 ISO G MTT-X, Machine Tap STE042 ISO G MTT-X, Machine Tap GoldE043 ISO G MTT-X, Machine Tap STE547 ISO G Machine Tap, (BSPF) BrightE550 ISO Rc Machine Tap, (BSPT) BrightE710 ANSI NPT Pipe Tap Bright TN1541 ANSI NPT Medium Hook, Straight Flute TiNTN1543 ANSI NPTF Medium Hook, Straight Flute TiN

1994(UNC) ANSI UNC Combination Drill/Tap Bright1994(UNF) ANSI UNF Combination Drill/Tap BrightE650 ISO Metric Combination Drill/Tap STE651 ISO UNC Combination Drill/Tap STE653 ANSI NPT Combination Drill/Tap Bright 229C ANSI N/A Drill/Tap Set, 9-Piece Bright1215 ANSI N/A T-Handle Tap Wrench N/A1301 ANSI N/A Die stock N/A3850 ANSI N/A Straight-Handle Tap Wrench N/A

323 329 324 325 325 326 326 328 328 327 327 329 330 330 331 331 332 333 322 323 324

334 334 335 335 336 337 337 338 338

2010 UNC, UNF, UNS, NPT Carbon Steel Bright 3412025 UNC, UNF, UNS, NPT Carbon Steel Bright 3392025S Sets Carbon Steel Bright 340 2325M Metric Carbon Steel Bright 3402510 UNC, UNF HSS Bright 3422710M Metric HSS Bright 3433150 Tap/Round Die Sets Carbon Steel, HSS Bright 344

(con‘t)

Dies

Straight Flute Taps


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







= Excellent = Good Page # for easy reference

Stra

ight

Flu

te T

aps

Style:Thread Form:

Thread Designation:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:

Finish/Coating:Tool Material:

Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300


1. Steel


2.Stainless Steel


3.Cast Iron




Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find Hole Type and other Product Features.Locate your Best Product Choices and Surface Feet per Minute (SFM). example: 72 72 = SFM

NOTE: Additional cutting charts located on pages 204-210.

Tool Brand:

186

3

T100 T110

211 211

■6 ●6●4 ■4

●60●30

●7

●60

●50●30

●25

E061, E071

212-215●22●20●16●12●7●4

■12■7■10■5

●12●30●20

●20■15

●12●7

1

23

4

2

1



Surface Feet Per Minute (SFM)

Straight Flute Taps (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Stra

ight

Flu

te T

aps


1528

216-218●15●11●8●8●5●2

●6●4●4

●12●8●8●4●5●4

●5●2

●6●20●15●2●12●24●18●5●8●4

1528

218●15●11●8●8●5●2

●6●4●4

●12●8●8●4●5●4

●5●2

●6●20●15●2●12●24●18●5●8●4

1500

220-223●15●11●8●8●5●2

●6●4●4

●12●8●8●4●5●4

●5●2

●6●20●15●2●12●24●18●5●8●4

1500

223●15●11●8●8●5●2

●6●4●4

●12●8●8●4●5●4

●5●2

●6●20●15●2●12●24●18●5●8●4

1700 1500A TN1500

225- 228 229●15 ●15 ●18●11 ●11 ●14●8 ●8 ●9●8 ●8 ●9●5 ●5 ●6●2 ●2 ●3

●6 ●6 ●8●4 ●4 ●8●4 ●4 ●5

●12 ●12 ●15●8 ●8 ●9●8 ●8 ●9●4 ●4 ●5●5 ●5 ●6●4 ●4 ●5

●5 ●5 ●6●2 ●2 ●3

●6 ●6 ●8●20 ●20 ●24●15 ●15 ●18●2 ●2 ●3●12 ●12 ●15●24 ●24 ●30●18 ●18 ●23●5 ●5 ●6●8 ●8 ●9●4 ●4 ●5

1500L

230-231●15●11●8●8●5●2

●6●4●4

●12●8●8●4●5●4

●5●2

●6●20●15●2●12●24●18●5●8●4

1500OV 1508

231 232●15 ●15●11 ●11●8 ●8●8 ●8●5 ●5●2 ●2

●6 ●6●4 ●4●4 ●4

●12 ●12●8 ●8●8 ●8●4 ●4●5 ●5●4 ●4

●5 ●5●2 ●2

●6 ●6●20 ●20●15 ●15●2 ●2●12 ●12●24 ●24●18 ●18●5 ●5●8 ●8●4 ●4

1595 1505

233 234-235■20 ●15■18 ●11■12 ●8■12 ●8■8 ●5●5 ●2

●9 ●6●6 ●4●6 ●4

●14 ●12●8 ●8●8 ●8●5 ●4●6 ●5●5 ●4●2●8 ●5●3 ●2

●9 ●6●27 ●20●21 ●15●3 ●2●15 ●12●30 ●24●20 ●18●6 ●5■30 ●8●8 ●4

1572 U1511

236-237 237●15 ●12●9 ●10●8 ●8●8 ●6

●5

●5●2

●14●8●12

■8■20 ●16■15 ●12

■12■24 ●20■18 ●12●5

●8


Straight Flute Taps


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







= Excellent = Good Page # for easy reference

Stra

ight

Flu

te T

aps

Style:Thread Form:

Thread Designation:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300


1. Steel


2.Stainless Steel


3.Cast Iron






Tool Brand:

188

3

1519 1600

238 239●15●11●8●8●5●2

●6●4●4

●12 ■15●8 ■11●8 ■11●4 ■6●5●4

●5●2

●6●20●15●2 ●4●12●24●18●5●8●4 ●4

1599 1599SB

240-241 241

■15 ■15■11 ■11■11 ■11■6 ■6

●4 ●4

●4 ●4

1

23

4

2

1




Straight Flute Taps (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Stra

ight

Flu

te T

aps


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

E059 E053 E054 E500 E501 E513

242 242 243 244-247 247 248-251●7 ●7 ●7●6 ●6 ●6●5 ●5 ●5●4 ●4 ●4●3 ●3 ●3

■22 ■22 ■22 ●12 ●12 ●12■18 ■18 ■18 ●7 ●7 ●7■25 ■25 ■25 ●10 ●10 ●10●18 ●18 ●18 ●5 ●5 ●5

●4 ●4 ●4●30 ●30 ●30 ●10 ●10 ●10

●7 ●7 ●7●4 ●4 ●4 ●2 ●2 ●2

●12 ●12 ●12●7 ●7 ●7

●20 ●20 ●20 ●5 ●5 ●5

■15 ■15 ■15 ●5 ●5 ●5●3 ●3 ●3

E025

252■25■22■18■16■10●5

●15●8●15●8●10●5

●12●5

■12●30■20

■16■35■20■15●30

E035 E026 E036 E005 E006 E015 E016

253 254 255 256 257 258 258■25 ■25 ■25 ■25 ■25 ■25 ■25■22 ■22 ■22 ■22 ■22 ■22 ■22■18 ■18 ■18 ■18 ■18 ■18 ■18■16 ■16 ■16 ■16 ■16 ■16 ■16■10 ■10 ■10 ■10 ■10 ■10 ■10●5 ●5 ●5 ●5 ●5 ●5 ●5

■8 ■8 ■8 ■8■7 ■7 ■7 ■7●5 ●5 ●5 ●5

●15 ●15 ●15 ●15 ●15 ●15 ●15●8 ●8 ●8 ●8 ●8 ●8 ●8●15 ●15 ●15 ●15 ●15 ●15 ●15●8 ●8 ●8 ●8 ●8 ●8 ●8●10 ●10 ●10●5 ●5 ●5

●12 ●12 ●12●5 ●5 ●5

■12 ■12 ■12●30 ●30 ●30■20 ■20 ■20

■16 ■16 ■16■35 ■35 ■35■20 ■20 ■20■15 ■15 ■15●30 ●30 ●30

Spi

ral P

oint

Tap

s

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


190

E000 E001 E010 E011

259 260 261 262■25 ■25 ■25 ■25■22 ■22 ■22 ■22■18 ■18 ■18 ■18■16 ■16 ■16 ■16■10 ■10 ■10 ■10●5 ●5 ●5 ●5

●7 ●7●6 ●6●4 ●4

●15 ●15 ●15 ●15●8 ●8 ●8 ●8●15 ●15 ●15 ●15●8 ●8 ●8 ●8●10 ●10●5 ●5

●12 ●12●5 ●5

■12 ■12●30 ●30■20 ■20

■16 ■16■35 ■35■20 ■20■15 ■15●30 ●30


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Spi

ral P

oint

Tap

s

Spiral Point Taps

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Style:Thread Form:

Flute Form:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Tool Brand:

How To Use This AMG Chart: Determine your Workpiece Material. Select Material from the AMG Chart below. Use the icons to find Hole Type and other Product Features. Locate your Best Product Choices and Surface Feet per Minute (SFM). example: 72 72 = SFM





1

23

4

2

13

E045

263

●10●5

■8■7■5■5


191

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Spiral Point Taps (con‘t)

Spi

ral P

oint

Tap

s


E049 E046 E055 E057 E060

263 264 264 265 265■40 ■40■40 ■40■32 ■32■30 ■30■17 ●17 ●10 ■17 ●10●11 ●11 ●5 ●11 ●5

■14 ■8 ■8■10 ■7 ■7■6 ■5 ■5■6 ■5 ■5

●22●18●25●18

■15●7 ●7

●15●8 ●8 ●8

■18 ■18●45 ●45■35 ■35

1534 1634

266-267 268■20 ■20■20 ■20■12 ■12■12 ■12■8 ■8●5 ●5

●9 ●9●6 ●6●6 ●6

●14 ●14●8 ●8●8 ●8●5 ●5●6 ●6●5 ●5●2 ●2●8 ●8●3 ●3

●9 ●9●27 ●27●21 ●21●3 ●3●15 ●15●30 ●30●20 ●20●6 ●6■30 ■30●8 ●8

TN1534 1585

269 270-271■24 ■20■23 ■20■15 ■12■15 ■12■9 ■8■6 ●5

■12 ●9■8 ●6●8 ●6

●15 ●14●9 ●8●9 ●8●6 ●5

●6●5●2

■9 ●8■4 ●3

■12 ●9■35 ●27■27 ●21●4 ●3■20 ●15■38 ●30■24 ●20■8 ●6■37 ■30■9 ●8

1585A

272■20■20■12■12■8●5

●9●6●6

●14●8●8●5●6●5●2●8●3

●9●27●21●3●15●30●20●6■30●8

TN1585 TN1585 1985

273 273 274●24 ●24 ■23●23 ●23 ■21●15 ●15 ■15●15 ●15 ■15●9 ●9 ■9●6 ●6 ●5

■12 ■12 ■11■8 ■8 ●6●8 ●8

●15 ●15●9 ●9●9 ●9●6 ●6

■6■5■2

■9 ■9 ■9■4 ■4 ■5

■3■12 ■12■35 ■35■27 ■27●4 ●4■20 ■20■38 ■38■24 ■24■8 ■8■37 ■37■9 ■9


192

1785M TN1785 1534NR

275 275 276-277■20 ●24 ■20■20 ●23 ■20■12 ●15 ■12■12 ●15 ■12■8 ●9 ■8●5 ●6 ●5

●9 ■12 ●9●6 ■8 ●6●6 ●8 ●6

●14 ●15 ●14●8 ●9 ●8●8 ●9 ●8●5 ●6 ●5●6 ●6●5 ●5●2 ●2●8 ■9 ●8●3 ■4 ●3

●9 ■12 ●9●27 ■35 ●27●21 ■27 ●21●3 ●4 ●3●15 ■20 ●15●30 ■38 ●30●20 ■24 ●20●6 ■8 ●6■30 ■37 ■30●8 ■9 ●8


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Spi

ral P

oint

Tap

s

Spiral Point Taps

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Style:Thread Form:

Flute Form:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Tool Brand:






1

23

4

2

13

1534NR

277■20■20■12■12■8●5

●9●6●6

●14●8●8●5●6●5●2●8●3

●9●27●21●3●15●30●20●6■30●8


(con‘t)

193

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Spi

ral F

lute

Tap

s

1578

284●20●18●14●10●5●3

●6●4●3

●3●10●4

●10

●15

●10●25●13●10●20

E027 E028 E037 E038 E069 E079 E007 E008 E017

285 286 287 288 289 290 291 291 292■25 ■25 ■25 ■25 ■25 ■25 ■25■22 ■22 ■22 ■22 ■22 ■22 ■22■18 ■18 ■18 ■18 ■18 ■18 ■18■16 ■16 ■16 ■16 ■16 ■16 ■16■10 ■10 ■10 ■10 ●10 ●10 ■10 ■10 ■10

●5 ●5 ●5 ●5

●7 ●7 ■7 ■7 ●7●6 ●6 ■6 ■6 ●6●4 ●4 ■4 ■4 ●4

●10 ●10 ●10 ●10●5 ●5 ●5 ●5

●12 ●12 ●12 ●12●5 ●5 ●5 ●5

■12●30■20

■16 ■16 ■16 ■16■35 ■35 ■35 ■35■20 ■20 ■20 ■20■15 ■15 ■15 ■15●30 ●30 ●30

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Spiral Point Taps (con‘t)

Spi

ral P

oint

Tap

s


1585NR

278-279●20●18●14●10●5●3

●6●4●3

●3●10●4

●10

●15

●10●25●13●10●20

1593 1585OV

280 281■20 ■20■20 ■20■12 ■12■12 ■12■8 ■8●5 ●5

●9 ●9●6 ●6●6 ●6

●14 ●14●8 ●8●8 ●8●5 ●5●6 ●6●5 ●5●2 ●2●8 ●8●3 ●3

●9 ●9●27 ●27●21 ●21●3 ●3●15 ●15●30 ●30●20 ●20●6 ●6■30 ■30●8 ●8

1785NR 1534NE

282 283■20■20■12■12■8●5

●9●6●6

●14●8●8●5●6●5●2●8●3

●9●27●21●3●15●30●20●6■30●8

Surface Feet Per Minute (SFM) Surface Feet Per Minute (SFM)

Spiral Point /Spiral Flute Taps (con‘t)

Spiral Flute Taps

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Spi

ral P

oint

Tap

s

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


Style :Thread Form:

Flute Form:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Spi

ral F

lute

Tap

s


Tool Brand:





194

1

23

2

13

4



E018 E085

292 293■25■22■18■16■10 ●10

●5

●7 ■7●6 ■6●4 ■4

E002 E003

294 295■25 ■25■22 ■22■18 ■18■16 ■16■10 ■10

●7●6●4

●10●5

●12●5

■16■35■20■15


Spiral Flute Taps (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Spi

ral F

lute

Tap

s


1588 1788 1590

304 305 306■21■18■12■12●9

■9■8■6

■6■5●2

●3●9 ●9■24 ■24■24 ■24

■15 ■15■20 ■20■20 ■20

E012 E013

296 297■25 ■25■22 ■22■18 ■18■16 ■16■10 ■10

●7●6●4

●10●5

●12●5

■16■35■20■15●30

E050 E051 E048 E044 E052 E058

298 298 299 299 300 300■40 ■40 ●25 ●25 ■40■40 ■40 ●22 ●22 ■40■32 ■32 ●32 ●18 ●18 ■32■30 ■30 ●27 ■16 ■16 ■30■17 ■17 ●13 ■10 ■10 ■17●11 ●11 ●11 ■5 ●11

■14■10■6■6

●7 ●7 ●5 ●7

●8 ●5 ●8

■18 ■18 ●12 ■18●45 ●45 ■30 ●45■35 ■35 ■20 ■35

●16■35■20■15

1582

301●20●15●11●11

●8●6●6

●6●5●2●6●5

1586 1587

302 303●20●15●11●11

●8●6●6

●6●5●2●6●5

●9■24■24

■15■20■20

1591(UNC)

307■21■18■12■12●9

■9■8■6

■6■5●2

●3



Thread Forming Taps

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


Style:Thread Form:

Flute Form:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper









Thre

ad F

orm

ing

Taps

Tool Brand:

196

1

23

2

1 3



4

E029 E064

308 309■55 ●30■50 ●27■45 ●23■40 ●20●20

■18■15●10

■35

■20●8

●25

●40

■40 ●22■55 ●38■40 ●22●25

E039 E074

309 310■55 ●30■50 ●27■45 ●23■40 ●20●20

■18■15●10

■35

■20●8

●25

●40

■40 ●22■55 ●38■40 ●22●25



Thread Forming Taps (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Thre

ad F

orm

ing

Taps

197

E009 E094

310 311■55 ●30■50 ●27■45 ●23■40 ●20●20

■18■15●10

■35

■20●8

●25

●40

■40 ●22■55 ●38■40 ●22●25

E097 E098 E099 E080

311 312 312 313■55 ■55 ■55■50 ■50 ■50■45 ■45 ■45●40 ■40 ■40

●20 ●20

●18 ■18 ■18●15 ■15 ■15

●10 ●10

■35 ■35 ■35

■20 ■20 ■20●8 ●8 ●8

●25 ●25 ●25 ■25

●40 ●40 ●40 ■40

■40 ●40 ●40 ■40■55 ●55 ●55 ■55■40 ■40 ■40 ■40●25 ●25 ●25

1580(UNC) 1580(UNF) 1580(M) 3300(UNC) 3300(UNF) 3300(M) 3306E(UNC) 3306E(UNF)

314 315 316 317 318 319 320 321■30 ■30 ■30 ■30 ■30 ■30 ■30 ■30■24 ■24 ■24 ■24 ■24 ■24 ■24 ■24■15 ■15 ■15 ■15 ■15 ■15 ■15 ■15■15 ■15 ■15 ■15 ■15 ■15 ■15 ■15●9 ●9 ●9 ●9 ●9 ●9 ●9 ●9

●12 ●12 ●12 ●12 ●12 ●12 ●12 ●12●9 ●9 ●9 ●9 ●9 ●9 ●9 ●9

●9 ●9 ●9 ●9 ●9 ●9 ●9 ●9●8 ●8 ●8 ●8 ●8 ●8 ●8 ●8

●9 ●9 ●9 ●9 ●9 ●9 ●9 ●9

●12 ●12 ●12 ●12 ●12 ●12 ●12 ●12■37 ■37 ■37 ■37 ■37 ■37 ■37 ■37■30 ■30 ■30 ■30 ■30 ■30 ■30 ■30

■24 ■24 ■24 ■24 ■24 ■24 ■24 ■24■49 ■49 ■49 ■49 ■49 ■49 ■49 ■49■30 ■30 ■30 ■30 ■30 ■30 ■30 ■30


Pipe Taps

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Pip

e Ta

ps

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


Style:Thread Form:

Flute Form:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper












Tool Brand:

198

E710 1541 TN1541 1543 TN1543

1/16 - 3“

322 323 323 324 324●4 ●4 ●5 ●4 ●5●4 ●4 ●5 ●4 ●5●6 ■6 ■7 ■6 ■7●5 ■5 ■6 ■5 ■6●3 ●3 ●4 ●3 ●4

●6 ●6 ●7 ●6 ●7●4 ●4 ●5 ●4 ●5●6 ●6 ●7 ●6 ●7●4 ●4 ●5 ●4 ●5

●11 ●11 ●12 ●11 ●12

●11 ●11 ●12 ●11 ●12●7 ●7 ●8 ●7 ●8●4 ●4 ●5 ●4 ●5

1

23

2

13

4




Pipe Taps (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Pip

e Ta

ps


1544 1545 1545A 1546

325 325 326 326●4 ●4 ●4 ●4●4 ●4 ●4 ●4■6 ■6 ■6 ■6■5 ■5 ■5 ■5●3 ●3 ●3 ●3

●6 ●6 ●6 ●6●4 ●4 ●4 ●4●6 ●6 ●6 ●6●4 ●4 ●4 ●4

●11 ●11 ●11 ●11

●11 ●11 ●11 ●11●7 ●7 ●7 ●7●4 ●4 ●4 ●4

1568 1567 1548 1549 1542 1592

327 327 328 328 329 329●4 ●4 ●4 ●4 ●4 ●4●4 ●4 ●4 ●4 ●4 ●4■6 ■6 ■6 ■6 ■6 ■6■5 ■5 ■5 ■5 ■5 ■5●3 ●3 ●3 ●3 ●3 ●3

●6 ●6 ●6 ●6 ●6 ●6●4 ●4 ●4 ●4 ●4 ●4●6 ●6 ●6 ●6 ●6 ●6●4 ●4 ●4 ●4 ●4 ●4

●11 ●11 ●11 ●11 ●11 ●11

●11 ●11 ●11 ●11 ●11 ●11●7 ●7 ●7 ●7 ●7 ●7●4 ●4 ●4 ●4 ●4 ●4

E040 E041 E042 E043 E547

330 330 331 331 332-333■25 ■25 ■25 ■25 ●7■22 ■22 ■22 ■22 ●6■18 ■18 ■18 ■18 ●5■16 ■16 ■16 ■16 ●4■10 ■10 ■10 ■10 ●3●5 ●5 ●5

●7 ●7●6 ●6●4 ●4

●15 ●15 ●12●8 ●8 ●7●15 ●15 ●10●8 ●8 ●5●10 ●10●5 ●5

●12 ●12●5 ●5

■12 ●4●30 ●10■20 ●7

●2■16 ■16■35 ■35 ●12■20 ■20 ●7■15 ■15 ●5●30 ●30

●5●3

E550

333●22●20●16●12●7●4

●7●5●7

■12■7■10■5

■12●30●20●4

●35●20●15

●12●7


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Mis

c Ta

ps

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

Miscellaneous Taps and Dies

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---

■ ●


Style:Thread Form:

Flute Form:Chamfer:

Depth:

Tolerance:

Standard:

Through/Blind Hole:

Direction:


Coolant:

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find Hole Type and other Product Features.Locate your Best Product Choices and Surface Feet per Minute (SFM). example 72 72 - SFM

NOTE: Additional cutting charts located on page 204-210.



Tool Brand:

200

1

23

2

13

4

1994 E650, E651 E653

1/16 - 1“

334 335 336●82 ●82 ●82●72 ●72 ●72●59 ●59 ●59●49 ●49 ●49

●26 ●26 ●26

●98 ●98 ●98●66 ●66 ●66

●59 ●59 ●59●115 ●115 ●115

●98 ●98 ●98

2025, 2325M, 2010

342-343

■26■23■20●16

●13●7

■26■23■20●16

●7●30●7●7●30●26●23

■33■49■49●33●49●33●16

See pg 337-338 for these products

2510, 2710M





Tap Technical Charts

201

Threading with Taps Icon Guide for TapsTap Drill Sizes for Metric M-Profile Screw Threads Tap Drill Sizes for Forming TapsForming Tap Drill Sizes for Self-Locking ThreadsTap Projection and Hole Size for Pipe TapsTap Size Recommendations for Classes 2B and 3BUnified Screw Thread LimitsTapping Speeds

Tap Technical Charts202203204205206207208209210


Threading with Taps

202



American National Standard Institute - Standard Tap Blank used in the US- Fractional Tap Blank Dimensions.

International Organization for Standardization - Common Tap Blanks used in Great Britain - Metric Tap Blank Dimensions(Dormer ISO Standard)

Deutsches Institut fur Normung - Standard Organization based in Germany - Metric Tap Blank Dimensions that are normally longer than ISO and ANSI standard(Dormer DIN Standard)

Spiral Point

Form Tap

Spiral Flute

Through or Blind Hole

CoolantThrough Hole

Straight Flute

HelixAngle

DepthClassof Fit

Parallel InternalThread

Carbide (Hard Metal)

TaperChamfer

PlugChamfer

Semi-BottomingChamfer

FullBottomingChamfer

HSCo Powder Steel

HSS Powder Steel

Hard Lube

Flash Chrome

Steam Oxide

Nitride NitrideSteam

HSS Cobalt

Chromium Steel

Carbide Zirconium Nitride

Chromium Nitride

Gold

Icon Guide for Taps


Threading with Taps

204

Tap Drill Sizes for Unified Threads

Tap Drill Sizes for Metric M-Profile Screw Threads

The charts on this page are recommended sizes for cutting taps. Hole sizes shown may not suit UNJ and MJ hole requirements



205

Tap Drill Sizes for Forming Taps

*Probable percent of full thread produced in tapped hole using standard drill sizes.

*


Threading with Taps

206

Forming Tap Drill Sizes for Self-Locking Threads



207

Tap Projection and Hole Size for Pipe Taps


Threading with Taps

208

Tap Size Recommendations for Classes 2B and 3B



209

Unified Screw Thread Limits

*Internal Thread Minor Diameter Tolerances. Internal thread minor diameter tolerances are based on a length of engagement equal to the nominal diameter. For general applications, these tolerances are suitable for lengths of engagement up to 1-1/2 diameters. However, some thread applications have lengths of engagement which are greater than 1-1/2 diameters or less than the nominal diameter. For such applications, it may be advantageous to increase or decrease the tolerance, respectively.

* *

**


Threading with Taps

210

Tapping Speeds (Surface Feet Per Minute to Revolutions Per Minute)

211www.precisiondormer.com■ = EXCELLENT FOR APPLICATION ● = GOOD FOR APPLICATION

T100 - T110

T100

■●

MPmm

d2Ømm

l1

mm

l2

mm

l3

mmamm

#Flutes Stock #

EDP #ore-Code

3 0.50 3.5 56 10 6 2.70 3 2.6 0374214 T100M34 0.70 4.5 63 13 6 3.40 3 3.4 0374221 T100M45 0.80 6 70 16 8 4.90 3 4.3 0374238 T100M56 1.00 6 80 20 8 4.90 3 5.1 0374245 T100M68 1.25 8 90 25 9 6.20 3 6.9 0374252 T100M810 1.50 10 100 30 11 8.00 3 8.7 0374269 T100M1012 1.75 12 110 36 14 9.00 3 10.4 0374276 T100M12

T110

■●

MPmm

d2Ømm

l1

mm

l2

mm

l3

mmamm

#Flutes Stock #

EDP #ore-Code

3 0.50 3.5 56 10 6 2.70 4 2.6 0374283 T110M34 0.70 4.5 63 13 6 3.40 5 3.4 0374290 T110M45 0.80 6 70 16 8 4.90 5 4.3 0374306 T110M56 1.00 6 80 20 8 4.90 5 5.1 0374313 T110M68 1.25 8 90 25 9 6.20 5 6.9 0374320 T110M810 1.50 10 100 30 11 8.00 5 8.7 0374337 T110M1012 1.75 12 110 36 14 9.00 6 10.4 0374344 T110M12

● Tarauds machine● Carbide-Taps ● Machos de máquina● Straight Flute

212 www.precisiondormer.com ■ = EXCELLENT FOR APPLICATION ● = GOOD FOR APPLICATION

E061

E061

■

●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

6 32 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348291 E0616-32NO16 32 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348307 E0616-32NO26 32 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348314 E0616-32NO36 32 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348321 E0616-32NO68 32 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348284 E0618-32NO18 32 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348338 E0618-32NO28 32 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348345 E0618-32NO38 32 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348352 E0618-32NO610 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348369 E06110-24NO110 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348376 E06110-24NO210 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348383 E06110-24NO310 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348390 E06110-24NO612 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348406 E06112-24NO112 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348413 E06112-24NO212 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348420 E06112-24NO312 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348437 E06112-24NO61/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348444 E0611/4NO11/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348451 E0611/4NO21/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348468 E0611/4NO31/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348475 E0611/4NO65/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348482 E0615/16NO15/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348499 E0615/16NO25/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348505 E0615/16NO35/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348512 E0615/16NO63/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348529 E0613/8NO13/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348536 E0613/8NO23/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348543 E0613/8NO33/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348550 E0613/8NO67/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348567 E0617/16NO17/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348574 E0617/16NO27/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348581 E0617/16NO37/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348598 E0617/16NO61/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348604 E0611/2NO11/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348611 E0611/2NO21/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348628 E0611/2NO31/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348635 E0611/2NO6

● Hand Tap MTT● For use in a wide variety of materials and

appropriate in either through or blind hole applications

● MTT - Tarauds à main ● MTT Machos de mano

Sizes up to 1” - Gold Finish 1” and larger - Bright Finish


E061

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

9/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 27/64 12.20 0351833 E0619/16NO19/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 31/64 12.20 0348642 E0619/16NO29/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 31/64 12.20 0348659 E0619/16NO39/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 31/64 12.20 0348666 E0619/16NO65/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348673 E0615/8NO15/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348680 E0615/8NO25/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348697 E0615/8NO35/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348703 E0615/8NO63/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348710 E0613/4NO13/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348727 E0613/4NO23/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348734 E0613/4NO33/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348741 E0613/4NO67/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348758 E0617/8NO17/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348765 E0617/8NO27/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348772 E0617/8NO37/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348789 E0617/8NO61“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348796 E0611NO11“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348802 E0611NO21“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348819 E0611NO31“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348826 E0611NO61.1/8 7 5.7/16 1.3976 0.8950 0.6710 4 H4 63/64 25.00 0388112 E0611.1/8NO11.1/8 7 5.7/16 1.3976 0.8950 0.6710 4 H4 63/64 25.00 0388129 E0611.1/8NO21.1/8 7 5.7/16 1.3976 0.8950 0.6710 4 H4 63/64 25.00 0388136 E0611.1/8NO31.1/4 7 5.3/4 1.6338 1.0210 0.7650 4 H4 1.7/64 28.00 0388143 E0611.1/4NO11.1/4 7 5.3/4 1.6338 1.0210 0.7650 4 H4 1.7/64 28.00 0388150 E0611.1/4NO21.1/4 7 5.3/4 1.6338 1.0210 0.7650 4 H4 1.7/64 28.00 0388167 E0611.1/4NO31.3/8 6 6.1/16 1.8700 1.1090 0.8300 4 H4 1.7/32 30.75 0388174 E0611.3/8NO1 1)

1.3/8 6 6.1/16 1.8700 1.1090 0.8300 4 H4 1.7/32 30.75 0388181 E0611.3/8NO2 1)

1.3/8 6 6.1/16 1.8700 1.1090 0.8300 4 H4 1.7/32 30.75 0388198 E0611.3/8NO3 1)

1.1/2 6 6.3/8 1.8700 1.2330 0.9520 4 H4 1.11/32 34.00 0388204 E0611.1/2NO1 1)

1.1/2 6 6.3/8 1.8700 1.2330 0.9520 4 H4 1.11/32 34.00 0388211 E0611.1/2NO2 1)

1.1/2 6 6.3/8 1.8700 1.2330 0.9520 4 H4 1.11/32 34.00 0388228 E0611.1/2NO3 1)

1) Available as special. Please call for delivery.






E071

E071

■

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

6 40 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349427 E0716-40NO1 1)

6 40 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349434 E0716-40NO2 1)

6 40 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349441 E0716-40NO3 1)

6 40 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349458 E0716-40NO6 1)

8 36 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349465 E0718-36NO18 36 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349472 E0718-36NO28 36 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349489 E0718-36NO38 36 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349496 E0718-36NO610 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349502 E07110-32NO110 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349519 E07110-32NO210 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349526 E07110-32NO310 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349533 E07110-32NO612 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349540 E07112-28NO1 1)

12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349557 E07112-28NO2 1)

12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349564 E07112-28NO3 1)

12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349571 E07112-28NO6 1)

1/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349588 E0711/4NO11/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349595 E0711/4NO21/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349601 E0711/4NO31/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349618 E0711/4NO65/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349625 E0715/16NO15/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349632 E0715/16NO25/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349649 E0715/16NO35/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349656 E0715/16NO63/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349663 E0713/8NO13/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349670 E0713/8NO23/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349687 E0713/8NO33/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349694 E0713/8NO67/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/64 9.90 0349700 E0717/16NO17/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/64 9.90 0349717 E0717/16NO27/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/640 9.90 0349724 E0717/16NO37/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/64 9.90 0349731 E0717/16NO61/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349748 E0711/2NO11/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349755 E0711/2NO21/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349762 E0711/2NO31/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349779 E0711/2NO6







E071

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits Stock #

EDP #ore-Code

9/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 33/64 12.90 0349786 E0719/16NO19/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 22/64 12.90 0349793 E0719/16NO29/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 33/64 12.90 0349809 E0719/16NO39/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 33/64 12.90 0349816 E0719/16NO65/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349823 E0715/8NO15/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349830 E0715/8NO25/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349847 E0715/8NO35/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349854 E0715/8NO63/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0349861 E0713/4NO13/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0349878 E0713/4NO23/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0349885 E0713/4NO33/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0351932 E0713/4NO67/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349892 E0717/8NO17/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349908 E0717/8NO27/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349915 E0717/8NO37/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349922 E0717/8NO61“ 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349939 E0711X12NO11“ 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0349946 E0711X12NO21 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349953 E0711X12NO31“ 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349960 E0711X12NO61“ 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349977 E0711X14NO11“ 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0349984 E0711X14NO21 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0349991 E0711X14NO31“ 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0350003 E0711X14NO61.1/8 12 5.7/16 2.1654 0.8950 0.6710 4 H4 1.3/64 26.50 0388235 E0711.1/8NO11.1/8 12 5.7/16 2.1654 0.8950 0.6710 4 H4 1.3/64 26.50 0388242 E0711.1/8NO21.1/8 12 5.7/16 2.1654 0.8950 0.6710 4 H4 1.3/64 26.50 0388259 E0711.1/8NO31.1/4 12 5.3/4 2.1654 1.0210 0.7650 4 H4 1.5/32 29.50 0388266 E0711.1/4NO11.1/4 12 5.3/4 2.1654 1.0210 0.7650 4 H4 1.5/32 29.50 0388273 E0711.1/4NO21.1/4 12 5.3/4 2.1654 1.0210 0.7650 4 H4 1.5/32 29.50 0388280 E0711.1/4NO31.3/8 12 6.1/16 2.5591 1.1090 0.8300 4 H4 1.9/32 32.75 0388297 E0711.3/8NO11.3/8 12 6.1/16 2.5591 1.1090 0.8300 4 H4 1.9/32 32.75 0388303 E0711.3/8NO21.3/8 12 6.1/16 2.5591 1.1090 0.8300 4 H4 1.9/32 32.75 0388310 E0711.3/8NO31.1/2 12 6.3/8 2.5591 1.2330 0.9250 4 H4 1.27/64 36.00 0388327 E0711.1/2NO11.1/2 12 6.3/8 2.5591 1.2330 0.9250 4 H4 1.27/64 36.00 0388334 E0711.1/2NO21.1/2 12 6.3/8 2.5591 1.2330 0.9250 4 H4 1.27/64 36.00 0388341 E0711.1/2NO3







1528(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes Limits Chamfer

EDP #ore-Code

1 64 1.11/16 3/8 0.141 0.110 3/16 2 H1 B 10106011 64 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 10105991 64 1.11/16 3/8 0.141 0.110 3/16 2 H1 T 10105981 64 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 10106002 56 1.3/4 7/16 0.141 0.110 3/16 2 H1 P 10106142 56 1.3/4 7/16 0.141 0.110 3/16 3 H1 B 10106122 56 1.3/4 7/16 0.141 0.110 3/16 3 H1 P 10106102 56 1.3/4 7/16 0.141 0.110 3/16 3 H1 T 10106082 56 1.3/4 7/16 0.141 0.110 3/16 2 H2 B 10106172 56 1.3/4 7/16 0.141 0.110 3/16 2 H2 P 10106152 56 1.3/4 7/16 0.141 0.110 3/16 3 H2 B 10106132 56 1.3/4 7/16 0.141 0.110 3/16 3 H2 P 10106112 56 1.3/4 7/16 0.141 0.110 3/16 3 H2 T 10106093 48 1.13/16 1/2 0.141 0.110 3/16 3 H1 P 10106263 48 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 10106313 48 1.13/16 1/2 0.141 0.110 3/16 3 H2 B 10106293 48 1.13/16 1/2 0.141 0.110 3/16 3 H2 P 10106273 48 1.13/16 1/2 0.141 0.110 3/16 3 H2 T 10106254 40 1.7/8 9/16 0.141 0.110 3/16 2 H1 P 10106494 40 1.7/8 9/16 0.141 0.110 3/16 3 H1 B 10106474 40 1.7/8 9/16 0.141 0.110 3/16 3 H1 P 10106454 40 1.7/8 9/16 0.141 0.110 3/16 3 H1 T 10106434 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 10106524 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10106504 40 1.7/8 9/16 0.141 0.110 3/16 3 H2 B 10106484 40 1.7/8 9/16 0.141 0.110 3/16 3 H2 P 10106464 40 1.7/8 9/16 0.141 0.110 3/16 3 H2 T 10106445 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10106665 40 1.15/16 5/8 0.141 0.110 3/16 3 H2 T 10106605 40 1.15/16 5/8 0.141 0.110 3/16 3 H2 B 10106645 40 1.15/16 5/8 0.141 0.110 3/16 3 H2 P 10106626 32 2“ 11/16 0.141 0.110 3/16 2 H1 P 10106846 32 2“ 11/16 0.141 0.110 3/16 3 H1 B 10106816 32 2“ 11/16 0.141 0.110 3/16 3 H1 P 10106786 32 2“ 11/16 0.141 0.110 3/16 3 H1 T 10106756 32 2“ 11/16 0.141 0.110 3/16 2 H2 B 10106886 32 2“ 11/16 0.141 0.110 3/16 2 H2 P 10106856 32 2“ 11/16 0.141 0.110 3/16 3 H2 B 10106826 32 2“ 11/16 0.141 0.110 3/16 3 H2 P 10106796 32 2“ 11/16 0.141 0.110 3/16 3 H2 T 1010676

●

● Tarauds à main● Hand Tap ● Machos de mano

● For use in a wide variety of materials and appropriate in either through or blind hole applications

● Machine Screw Sizes


1528(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

6 32 2“ 11/16 0.141 0.110 3/16 2 H3 B 10106896 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10106866 32 2“ 11/16 0.141 0.110 3/16 3 H3 B 10106836 32 2“ 11/16 0.141 0.110 3/16 3 H3 P 10106806 32 2“ 11/16 0.141 0.110 3/16 3 H3 T 10106778 32 2.1/8 3/4 0.168 0.131 1/4 4 H1 P 10106998 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 B 10107098 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 10107068 32 2.1/8 3/4 0.168 0.131 1/4 3 H2 B 10107158 32 2.1/8 3/4 0.168 0.131 1/4 3 H2 P 10107128 32 2.1/8 3/4 0.168 0.131 1/4 4 H2 B 10107038 32 2.1/8 3/4 0.168 0.131 1/4 4 H2 P 10107008 32 2.1/8 3/4 0.168 0.131 1/4 4 H2 T 10106978 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 10107108 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 10107078 32 2.1/8 3/4 0.168 0.131 1/4 3 H3 B 10107168 32 2.1/8 3/4 0.168 0.131 1/4 3 H3 P 10107138 32 2.1/8 3/4 0.168 0.131 1/4 4 H3 B 10107048 32 2.1/8 3/4 0.168 0.131 1/4 4 H3 P 10107018 32 2.1/8 3/4 0.168 0.131 1/4 4 H3 T 101069810 24 2.3/8 7/8 0.194 0.152 1/4 3 H1 P 101073810 24 2.3/8 7/8 0.194 0.152 1/4 4 H1 P 101072610 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 101073610 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 101073310 24 2.3/8 7/8 0.194 0.152 1/4 3 H2 P 101073910 24 2.3/8 7/8 0.194 0.152 1/4 4 H2 B 101073010 24 2.3/8 7/8 0.194 0.152 1/4 4 H2 P 101072710 24 2.3/8 7/8 0.194 0.152 1/4 4 H2 T 101072410 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 101073710 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101073410 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 101074310 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 101074010 24 2.3/8 7/8 0.194 0.152 1/4 4 H3 B 101073110 24 2.3/8 7/8 0.194 0.152 1/4 4 H3 P 101072810 24 2.3/8 7/8 0.194 0.152 1/4 4 H3 T 101072512 24 2.3/8 15/16 0.220 0.165 9/32 4 H3 B 101076812 24 2.3/8 15/16 0.220 0.165 9/32 4 H3 P 101076712 24 2.3/8 15/16 0.220 0.165 9/32 4 H3 T 1010765



● Machine Screw Sizes


1528(UNF)UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

0 80 1.5/8 5/16 0.141 0.110 3/16 2 H1 B 10105960 80 1.5/8 5/16 0.141 0.110 3/16 2 H1 P 10105940 80 1.5/8 5/16 0.141 0.110 3/16 2 H1 T 10105930 80 1.5/8 5/16 0.141 0.110 3/16 2 H2 B 10105970 80 1.5/8 5/16 0.141 0.110 3/16 2 H2 P 10105951 72 1.11/16 3/8 0.141 0.110 3/16 2 H1 B 10106061 72 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 10106041 72 1.11/16 3/8 0.141 0.110 3/16 2 H1 T 10106031 72 1.11/16 3/8 0.141 0.110 3/16 2 H2 B 10106071 72 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 10106052 64 1.3/4 7/16 0.141 0.110 3/16 3 H2 B 10106212 64 1.3/4 7/16 0.141 0.110 3/16 3 H2 P 10106202 64 1.3/4 7/16 0.141 0.110 3/16 3 H2 T 10106183 56 1.13/16 1/2 0.141 0.110 3/16 3 H2 B 10106373 56 1.13/16 1/2 0.141 0.110 3/16 3 H2 P 10106363 56 1.13/16 1/2 0.141 0.110 3/16 3 H2 T 10106344 48 1.7/8 9/16 0.141 0.110 3/16 3 H2 B 10106564 48 1.7/8 9/16 0.141 0.110 3/16 3 H2 P 10106554 48 1.7/8 9/16 0.141 0.110 3/16 3 H2 T 10106535 44 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10106735 44 1.15/16 5/8 0.141 0.110 3/16 3 H2 B 10106725 44 1.15/16 5/8 0.141 0.110 3/16 3 H2 P 10106715 44 1.15/16 5/8 0.141 0.110 3/16 3 H2 T 10106696 40 2“ 11/16 0.141 0.110 3/16 2 H2 P 10106946 40 2“ 11/16 0.141 0.110 3/16 3 H2 B 10106936 40 2“ 11/16 0.141 0.110 3/16 3 H2 P 10106926 40 2“ 11/16 0.141 0.110 3/16 3 H2 T 10106908 36 2.1/8 3/4 0.168 0.131 1/4 4 H2 B 10107208 36 2.1/8 3/4 0.168 0.131 1/4 4 H2 P 10107198 36 2.1/8 3/4 0.168 0.131 1/4 4 H2 T 101071710 32 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 101075310 32 2.3/8 7/8 0.194 0.152 1/4 4 H1 P 101074710 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 101075710 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 101075410 32 2.3/8 7/8 0.194 0.152 1/4 3 H2 B 101076310 32 2.3/8 7/8 0.194 0.152 1/4 3 H2 P 101076010 32 2.3/8 7/8 0.194 0.152 1/4 4 H2 B 101075110 32 2.3/8 7/8 0.194 0.152 1/4 4 H2 P 101074810 32 2.3/8 7/8 0.194 0.152 1/4 4 H2 T 101074510 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 101075810 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101075510 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 101076410 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 101076110 32 2.3/8 7/8 0.194 0.152 1/4 4 H3 B 101075210 32 2.3/8 7/8 0.194 0.152 1/4 4 H3 P 101074910 32 2.3/8 7/8 0.194 0.152 1/4 4 H3 T 101074612 28 2.3/8 15/16 0.220 0.165 9/32 4 H3 B 101077212 28 2.3/8 15/16 0.220 0.165 9/32 4 H3 P 101077112 28 2.3/8 15/16 0.220 0.165 9/32 4 H3 T 1010769

1528(UNS)UNS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 36 1.7/8 9/16 0.141 0.110 3/16 3 H2 B 10106424 36 1.7/8 9/16 0.141 0.110 3/16 3 H2 P 10106414 36 1.7/8 9/16 0.141 0.110 3/16 3 H2 T 1010640


1528S(UNC)

UNC TPI

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

1 64 1.11/16 3/8 3/16 .1410 .1100 2 H1 10110002 56 1.3/4 7/16 3/16 .1410 .1100 3 H2 10110033 48 1.13/16 1/2 3/16 .1410 .1100 3 H2 10110054 40 1.7/8 9/16 3/16 .1410 .1100 3 H2 10110085 40 1.15/16 5/8 3/16 .1410 .1100 3 H2 10110106 32 2“ 11/16 3/16 .1410 .1100 3 H2 10110126 32 2“ 11/16 3/16 .1410 .1100 3 H3 10110138 32 2.1/8 3/4 1/4 .1680 .1310 4 H2 10110168 32 2.1/8 3/4 1/4 .1680 .1310 4 H3 101101710 24 2.3/8 7/8 1/4 .1940 .1520 4 H2 101102010 24 2.3/8 7/8 1/4 .1940 .1520 4 H3 101102112 24 2.3/8 15/16 9/32 .2200 .1650 4 H3 1011025

1528S(UNF)UNF TPI

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

0 80 1.5/8 5/16 3/16 .1410 .1100 2 H1 10109991 72 1.11/16 3/8 3/16 .1410 .1100 2 H1 10110012 64 1.3/4 7/16 3/16 .1410 .1100 3 H2 10110733 56 1.13/16 1/2 3/16 .1410 .1100 3 H2 10110744 48 1.7/8 9/16 3/16 .1410 .1100 3 H2 10110755 44 1.15/16 5/8 3/16 .1410 .1100 3 H2 10110766 40 2“ 11/16 3/16 .1410 .1100 3 H2 10110148 36 2.1/8 3/4 1/4 .1680 .1310 4 H2 101101810 32 2.3/8 7/8 1/4 .1940 .1520 4 H2 101102310 32 2.3/8 7/8 1/4 .1940 .1520 4 H3 101102412 28 2.3/8 15/16 9/32 .2200 .1650 4 H3 1011026

1528S(UNS)UNS TPI

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

4 36 1.7/8 9/16 3/16 .1410 .1100 3 H2 1011006

● Hand Tap, Set of 3 pcs● Set includes taper, plug, and

bottoming tap

● Tarauds à main - Jeu de 3 ● Machos de mano, Juego de 3 piezas


1500(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H1 B 10100081/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H1 P 10100041/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H1 T 10100011/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H2 B 10100091/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H2 P 10100051/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H2 T 10100021/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 B 10100101/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 10100061/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 T 10100031/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 B 10100111/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 P 10100075/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 B 10100315/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 P 10100275/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 T 10100245/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 B 10100325/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10100285/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 T 10100255/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 B 10100335/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 P 10100293/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 B 10100533/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 P 10100493/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 T 10100463/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 10100543/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10100503/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 T 10100473/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 B 10100553/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 P 10100517/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H2 P 10100697/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 B 10100747/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10100707/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 T 10100677/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 10100757/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 10100711/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H2 B 10100911/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H2 P 10100871/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 10100921/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10100881/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 T 10100851/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 10100931/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 1010089

●

● Hand Tap● For use in a wide variety of materials and


● Tarauds à main ● Machos de mano


1500(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 B 10101089/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10101069/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 T 10101039/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 10101075/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H2 P 10101205/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 10101235/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10101215/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 T 10101185/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 10101245/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 10101223/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H2 P 10101413/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 10101443/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 10101423/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 T 10101393/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 10101453/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 10101437/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 B 10101597/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 10101577/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 T 10101547/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H6 P 10101581“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H2 P 10101691“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 B 10101721“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 10101701“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 T 10101671“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H6 P 10101711.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 B 10101841.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 P 10101831.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 T 10101821.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H9 P 10131311.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H4 B 10101901.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H4 P 10101891.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H4 T 10101881.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H9 P 10131551.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H10 P 10131801.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H4 B 10101961.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H4 P 10101951.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H4 T 10101941.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H10 P 10132041.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H4 B 10102021.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H4 P 10102011.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H4 T 1010200





1500(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H1 B 10100191/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H1 P 10100151/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H2 B 10100201/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H2 P 10100161/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 B 10100211/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 10100171/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 T 10100141/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H4 B 10100221/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H4 P 10100185/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H1 B 10100415/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 B 10100425/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 P 10100385/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 B 10100435/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10100395/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 T 10100365/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H4 B 10100445/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H4 P 10100403/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 B 10100643/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 P 10100603/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 10100653/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10100613/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 T 10100583/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H4 B 10100663/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H4 P 10100627/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H2 P 10100787/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 B 10100837/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10100797/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 T 10100767/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 10100847/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 10100801/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H2 P 10100961/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 10101011/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10100971/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 T 10100941/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 10101021/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 10100989/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H2 P 10101129/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 B 10101169/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10101139/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 T 1010110

●





1500(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 B 10101179/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 10101145/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H2 P 10101275/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 10101315/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10101285/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 T 10101255/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 10101325/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 10101293/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H2 P 10101483/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 10101523/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 10101493/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 T 10101463/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 10101533/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 10101507/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H2 P 10101627/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 B 10101667/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 10101637/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 T 10101607/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H6 P 10101641“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 B 10101751“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 10101741“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 T 10101731“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H7 P 10131051.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 B 10101871.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 P 10101861.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 T 10101851.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H7 P 10131411.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 6 H4 B 10101931.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 6 H4 P 10101921.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 6 H4 T 10101911.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 4 H8 P 10131661.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 6 H4 B 10101991.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 6 H4 P 10101981.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 6 H4 T 10101971.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 4 H8 P 10131901.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H4 B 10102051.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H4 P 10102041.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H4 T 10102031.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H8 P 1013214

1500(UNS)UNS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 B 10101811“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 10101781“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 T 1010176

11/16 11 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 T 1010133 11/16 11 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 P 101013411/16 11 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 B 101013511/16 16 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 T 101013611/16 16 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 P 101013711/16 16 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 B 1010138


1500S(UNC)

UNC TPI

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

1/4 20 2.1/2 1“ 5/16 0.2550 0.1910 4 H3 10110295/16 18 2.23/32 1.1/8 3/8 0.3180 0.2380 4 H3 10110353/8 16 2.15/16 1.1/4 7/16 0.3810 0.2860 4 H3 10110417/16 14 3.5/32 1.7/16 13/32 0.3230 0.2420 4 H3 10110451/2 13 3.3/8 1.21/32 7/16 0.3670 0.2750 4 H3 10110479/16 12 3.19/32 1.21/32 1/2 0.4290 0.3220 4 H3 10110495/8 11 3.13/16 1.13/16 9/16 0.4800 0.3600 4 H3 10110513/4 10 4.1/4 2“ 11/16 0.5900 0.4420 4 H3 10110557/8 9 4.11/16 2.7/32 3/4 0.6970 0.5230 4 H4 10110571“ 8 5.1/8 2.1/2 13/16 0.8000 0.6000 4 H4 10110591.1/8 7 5.7/16 2.9/16 7/8 0.8960 0.6720 4 H4 10110621.1/4 7 5.3/4 2.9/16 1“ 1.0210 0.7660 4 H4 10110641.3/8 6 6.1/16 3“ 1.1/16 1.1000 0.8310 4 H4 10110661.1/2 6 6.3/8 3“ 1.1/8 1.2300 0.9250 4 H4 1011068

1500S(UNF) UNF TPI

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

1/4 28 2.1/2 1“ 5/16 0.2550 0.1910 4 H3 10110325/16 24 2.23/32 1.1/8 3/8 0.3180 0.2380 4 H3 10110383/8 24 2.15/16 1.1/4 7/16 0.3810 0.2860 4 H3 10110447/16 20 3.5/32 1.7/16 13/32 0.3230 0.2420 4 H3 10110461/2 20 3.3/8 1.21/32 7/16 0.3670 0.2750 4 H3 10110489/16 18 3.19/32 1.21/32 1/2 0.4290 0.3220 4 H3 10110505/8 18 3.13/16 1.13/16 9/16 0.4800 0.3600 4 H3 10110523/4 16 4.1/4 2“ 11/16 0.5900 0.4420 4 H3 10110567/8 14 4.11/16 2.7/32 3/4 0.6970 0.5230 4 H4 10110581“ 12 5.1/8 2.1/2 13/16 0.8000 0.6000 4 H4 10110601.1/8 12 5.7/16 2.9/16 7/8 0.8960 0.6720 4 H4 10110631.1/4 12 5.3/4 2.9/16 1“ 1.0210 0.7660 6 H4 10110651.3/8 12 6.1/16 3“ 1.1/16 1.1000 0.8310 6 H4 10110671.1/2 12 6.3/8 3“ 1.1/8 1.2300 0.9250 6 H4 1011069

● Hand Tap, Set of 3 pcs● Set includes taper, plug, and

bottoming tap

● Tarauds à main - Jeu de 3 ● Machos de mano, Juego de 3 piezas

1500S(UNS) UNS TPI

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

11/16 11 4.1/32 1.13/16 5/8 0.5420 0.4060 4 H3 101105311/16 16 4.1/32 1.13/16 5/8 0.5420 0.4060 4 H3 10110541“ 14 5.1/8 2.1/2 13/16 0.8000 0.6000 4 H4 1011061


1700(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M1.6 0.35 1.5/8 5/16 0.141 0.110 3/16 2 D3 T 1012408M1.6 0.35 1.5/8 5/16 0.141 0.110 3/16 2 D3 P 1012409M1.6 0.35 1.5/8 5/16 0.141 0.110 3/16 2 D3 B 1012410M1.8 0.35 1.11/16 3/8 0.141 0.110 3/16 2 D3 T 1012411M1.8 0.35 1.11/16 3/8 0.141 0.110 3/16 2 D3 P 1012412M1.8 0.35 1.11/16 3/8 0.141 0.110 3/16 2 D3 B 1012413M2 0.40 1.3/4 7/16 0.141 0.110 3/16 3 D3 T 1012414M2 0.40 1.3/4 7/16 0.141 0.110 3/16 3 D3 P 1012415M2 0.40 1.3/4 7/16 0.141 0.110 3/16 3 D3 B 1012416M2.3 0.45 1.3/4 7/16 0.141 0.110 3/16 3 D3 P 1012421M2.3 0.45 1.3/4 7/16 0.141 0.110 3/16 3 D3 B 1012422M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 T 1012423M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 P 1012424M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 B 1012425M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 T 1012426M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 P 1012427M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 B 1012428M3 0.50 1.15/16 5/8 0.141 0.110 3/16 3 D3 T 1012432M3 0.50 1.15/16 5/8 0.141 0.110 3/16 3 D3 P 1012433M3 0.50 1.15/16 5/8 0.141 0.110 3/16 3 D3 B 1012434M3.5 0.60 2“ 11/16 0.141 0.110 3/16 3 D4 T 1012435M3.5 0.60 2“ 11/16 0.141 0.110 3/16 3 D4 P 1012436M3.5 0.60 2“ 11/16 0.141 0.110 3/16 3 D4 B 1012437M4 0.70 2.1/8 3/4 0.168 0.131 1/4 4 D4 T 1012441M4 0.70 2.1/8 3/4 0.168 0.131 1/4 4 D4 P 1012442M4 0.70 2.1/8 3/4 0.168 0.131 1/4 4 D4 B 1012443M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 4 D4 T 1012444M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 4 D4 P 1012445M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 4 D4 B 1012446M5 0.80 2.3/8 7/8 0.194 0.152 1/4 4 D4 T 1012453M5 0.80 2.3/8 7/8 0.194 0.152 1/4 4 D4 P 1012454M5 0.80 2.3/8 7/8 0.194 0.152 1/4 4 D4 B 1012455M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 T 1012459M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 P 1012460M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 B 1012461M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 T 1012465M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012466M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012467

●

● Hand Tap● For use in a wide variety of materials

and appropriate in either through or blind hole applications



1700(M)M

Pmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M8 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 T 1012468M8 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012469M8 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012470M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 T 1012471M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012472M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012473M9 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 P 1012478M9 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 B 1012479M10 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 T 1012480M10 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 P 1012481M10 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 B 1012482M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 T 1012483M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 P 1012484M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 B 1012485M11 1.50 3.5/32 1.7/16 0.323 0.242 13/32 4 D6 P 1012493M11 1.50 3.5/32 1.7/16 0.323 0.242 13/32 4 D6 B 1012494M12 1.25 3.3/8 1.21/32 0.367 0.275 7/16 4 D5 T 1012498M12 1.25 3.3/8 1.21/32 0.367 0.275 7/16 4 D5 P 1012499M12 1.25 3.3/8 1.21/32 0.367 0.275 7/16 4 D5 B 1012500M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 T 1012495M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 P 1012496M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 B 1012497M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D6 T 1012501M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D6 P 1012502M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D6 B 1012503M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 4 D7 T 1012504M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 4 D7 P 1012505M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 4 D7 B 1012506M16 1.50 3.13/16 1.13/16 0.480 0.360 9/16 4 D6 T 1012513M16 1.50 3.13/16 1.13/16 0.480 0.360 9/16 4 D6 P 1012514M16 1.50 3.13/16 1.13/16 0.480 0.360 9/16 4 D6 B 1012515M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 4 D7 T 1012516M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 4 D7 P 1012517M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 4 D7 B 1012518M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D6 T 1012522M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D6 P 1012523M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D6 B 1012524M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D7 T 1012525M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D7 P 1012526M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D7 B 1012527M20 1.50 4.15/32 2“ 0.652 0.489 11/16 4 D6 T 1012534M20 1.50 4.15/32 2“ 0.652 0.489 11/16 4 D6 P 1012535M20 1.50 4.15/32 2“ 0.652 0.489 11/16 4 D6 B 1012536M20 2.50 4.15/32 2“ 0.652 0.489 11/16 4 D7 T 1012537M20 2.50 4.15/32 2“ 0.652 0.489 11/16 4 D7 P 1012538M20 2.50 4.15/32 2“ 0.652 0.489 11/16 4 D7 B 1012539M22 1.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D6 T 1012540M22 1.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D6 P 1012541M22 1.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D6 B 1012542M22 2.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D7 T 1012543M22 2.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D7 P 1012544M22 2.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D7 B 1012545M24 2.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D7 T 1012546M24 2.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D7 P 1012547M24 2.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D7 B 1012548M24 3.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D8 T 1012555M24 3.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D8 P 1012556M24 3.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D8 B 1012557


● Tarauds à main - Jeu de 3

1700(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M30 3.50 5.7/16 2.9/16 1.021 0.766 1“ 4 D9 T 1012570M30 3.50 5.7/16 2.9/16 1.021 0.766 1“ 4 D9 P 1012571M30 3.50 5.7/16 2.9/16 1.021 0.766 1“ 4 D9 B 1012572M36 4.00 6.1/16 3“ 1.233 0.925 1.1/8 4 D9 T 1012573M36 4.00 6.1/16 3“ 1.233 0.925 1.1/8 4 D9 P 1012574M36 4.00 6.1/16 3“ 1.233 0.925 1.1/8 4 D9 B 1012575

1700S

1700S

MPmm

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

2 0.40 1.3/4 7/16 3/16 .1410 .1100 3 D3 10125582.5 0.45 1.13/16 1/2 3/16 .1410 .1100 3 D3 10125602.6 0.45 1.13/16 1/2 3/16 .1410 .1100 3 D3 10125593 0.50 1.5/16 5/8 3/16 .1410 .1100 3 D4 10125613.5 0.60 2“ 11/16 3/16 .1410 .1100 4 D4 10125624 0.70 2.1/8 3/4 1/47 0.1680 0.1310 4 D4 10125635 0.80 2.3/8 7/8 1/4 0.1940 0.1520 4 D4 10125646 1.00 2.1/2 1“ 5/16 0.2550 0.1910 4 D5 10125657 1.00 2.23/32 1.1/8 3/8 0.3180 0.2380 4 D5 10125768 1.00 2.23/32 1.1/8 3/8 0.3180 0.2380 4 D5 10125778 1.25 2.23/32 1.1/8 3/8 0.3180 0.2380 4 D5 101256610 1.25 2.15/16 1.1/4 7/16 0.3810 0.2860 4 D5 101257810 1.50 2.15/16 1.1/4 7/16 0.3810 0.2860 4 D6 101256712 1.25 3.3/8 1.21/32 7/16 0.3670 0.2750 4 D5 101257912 1.75 3.3/8 1.21/32 7/16 0.3670 0.2750 4 D6 101256814 2.00 3.19/32 1.21/32 1/2 0.4290 0.3220 4 D7 101258016 2.00 3.13/16 1.13/16 9/16 0.4800 0.3600 4 D7 101258118 2.50 4.1/32 1.13/16 5/8 0.5420 0.4060 4 D7 101258220 2.50 4.15/32 2“ 11/16 0.6520 0.4890 4 D7 1012583

● Hand Tap, Set of 3 pcs ● Machos de mano, Juego de 3 piezas


UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1.000 0.255 0.191 5/16 4 H3 B 10500215/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10500393/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10500617/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10500791/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10500979/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10501135/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10501283/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 10501497/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1050163

1500A(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1.000 0.255 0.191 5/16 4 H3 P 10500065/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10500283/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10500507/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10500701/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10500889/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10501065/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10501213/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 10501427/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 10501571“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1050170




●

●

1500A(UNF)


TN1500(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1.000 0.255 0.191 5/16 4 H3 P 10600065/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10600283/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10600507/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10600701/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10600881/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 10600925/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10601215/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 10601233/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 10601447/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1060157

TN1500(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1.000 0.255 0.191 5/16 4 H3 P 10600175/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10600393/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10600617/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10600791/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10600975/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 10601313/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1060152

●

●





1500L(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 10117725/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10117783/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10117847/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10117901/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10117969/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10118025/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10118083/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 10118207/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 10118261“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1011832

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 10117755/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 10117813/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10117877/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 10117931/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10117999/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10118055/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 10118113/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 10118237/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 10118291“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1011835

●

●

1500L(UNF)



● Left Hand


1500L(UNS)

UNS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1011838

1500OV(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1.000 0.255 0.191 5/16 4 H11 P 10117485/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H11 P 10117493/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H11 P 10117507/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H11 P 10117511/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H11 P 10117525/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H11 P 1011753

● Hand Tap, .005” Oversize● For use in a wide variety of materials and



●

●



● Left Hand


1508(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10102191/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10102165/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10102335/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10102303/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 10102433/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10102407/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10102481/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 10102531/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010252

1508(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10102261/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10102235/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10102375/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10102367/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10102501/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10102543/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 10102473/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010246

●

●


● Tarauds à main● Hand Tap ● Machos de mano● Optional Flutes


● Tarauds à main● Hand Tap ● Machos de mano● Optional Flutes


1595(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10102061/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10102075/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10102105/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 B 1010211

1595(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10102081/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010209




■●

■

●





1505(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

2.3/4 8 9.1/4 4“ 2.350 1.762 1.9/16 6 H8 B 10133512.3/4 8 9.1/4 4“ 2.350 1.762 1.9/16 6 H8 P 10133502.3/4 8 9.1/4 4“ 2.350 1.762 1.9/16 6 H8 T 10133492.7/8 8 9.1/4 4“ 2.475 1.856 1.9/16 6 H8 B 10133542.7/8 8 9.1/4 4“ 2.475 1.856 1.9/16 6 H8 P 10133532.7/8 8 9.1/4 4“ 2.475 1.856 1.9/16 6 H8 T 10133523“ 8 9.3/4 4.9/16 2.668 2.001 1.5/8 6 H8 B 10133573“ 8 9.3/4 4.9/16 2.668 2.001 1.5/8 6 H8 P 10133563“ 8 9.3/4 4.9/16 2.668 2.001 1.5/8 6 H8 T 1013355

●

● Hand Tap, Eight-Pitch● For use in a wide variety of materials


● Tarauds à main, Eight-Pitch ● Machos de mano, Eight-Pitch


1505(UNS)

UNS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1.1/8 8 5.7/16 2.9/16 0.896 0.672 7/8 4 H5 B 10133121.1/8 8 5.7/16 2.9/16 0.896 0.672 7/8 4 H5 P 10133111.1/8 8 5.7/16 2.9/16 0.896 0.672 7/8 4 H5 T 10133101.1/4 8 5.3/4 2.9/16 1.021 0.766 1“ 4 H5 B 10133151.1/4 8 5.3/4 2.9/16 1.021 0.766 1“ 4 H5 P 10133141.1/4 8 5.3/4 2.9/16 1.021 0.766 1“ 4 H5 T 10133131.3/8 8 6.1/16 3“ 1.108 0.831 1.1/16 4 H5 B 10133181.3/8 8 6.1/16 3“ 1.108 0.831 1.1/16 4 H5 P 10133171.3/8 8 6.1/16 3“ 1.108 0.831 1.1/16 4 H5 T 10133161.1/2 8 6.3/8 3“ 1.233 0.925 1.1/8 6 H5 B 10133211.1/2 8 6.3/8 3“ 1.233 0.925 1.1/8 6 H5 P 10133201.1/2 8 6.3/8 3“ 1.233 0.925 1.1/8 6 H5 T 10133191.5/8 8 6.11/16 3.3/16 1.305 0.978 1.1/8 6 H6 B 10133241.5/8 8 6.11/16 3.3/16 1.305 0.978 1.1/8 6 H6 P 10133231.5/8 8 6.11/16 3.3/16 1.305 0.978 1.1/8 6 H6 T 10133221.3/4 8 7“ 3.3/16 1.430 1.072 1.1/4 6 H6 B 10133271.3/4 8 7“ 3.3/16 1.430 1.072 1.1/4 6 H6 P 10133261.3/4 8 7“ 3.3/16 1.430 1.072 1.1/4 6 H6 T 10133251.7/8 8 7.5/16 3.9/16 1.519 1.139 1.1/4 6 H6 B 10133301.7/8 8 7.5/16 3.9/16 1.519 1.139 1.1/4 6 H6 P 10133291.7/8 8 7.5/16 3.9/16 1.519 1.139 1.1/4 6 H6 T 10133282“ 8 7.5/8 3.9/16 1.644 1.233 1.3/8 6 H6 B 10133332“ 8 7.5/8 3.9/16 1.644 1.233 1.3/8 6 H6 P 10133322“ 8 7.5/8 3.9/16 1.644 1.233 1.3/8 6 H6 T 10133312.1/8 8 8“ 3.9/16 1.769 1.327 1.3/8 6 H6 B 10133362.1/8 8 8“ 3.9/16 1.769 1.327 1.3/8 6 H6 P 10133352.1/8 8 8“ 3.9/16 1.769 1.327 1.3/8 6 H6 T 10133342.1/4 8 8.1/4 3.9/16 1.894 1.420 1.7/16 6 H6 B 10133392.1/4 8 8.1/4 3.9/16 1.894 1.420 1.7/16 6 H6 P 10133382.1/4 8 8.1/4 3.9/16 1.894 1.420 1.7/16 6 H6 T 10133372.3/8 8 8.1/2 4“ 2.019 1.514 1.7/16 6 H6 B 10133422.3/8 8 8.1/2 4“ 2.019 1.514 1.7/16 6 H6 P 10133412.3/8 8 8.1/2 4“ 2.019 1.514 1.7/16 6 H6 T 10133402.1/2 8 8.3/4 4“ 2.100 1.575 1.1/2 6 H6 B 10133452.1/2 8 8.3/4 4“ 2.100 1.575 1.1/2 6 H6 P 10133442.1/2 8 8.3/4 4“ 2.100 1.575 1.1/2 6 H6 T 10133432.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 B 10133482.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 P 1013347

●

● Tarauds à main, Eight-Pitch● Hand Tap, Eight-Pitch● For use in a wide variety of materials


● Machos de mano, Eight-Pitch


1505(UNS)

UNS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

2.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 P 10133472.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 T 1013346

1572(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 40 2“ 11/16 0.141 0.110 3/16 3 H2 P 10104194 40 2“ 11/16 0.141 0.110 3/16 3 H2 B 10104216 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 10104276 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 10104298 32 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 10104358 32 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 101043710 24 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 101043810 24 2.1/2 1“ 0.255 0.191 5/16 3 H2 B 10104401/4 20 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10104511/4 20 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10104535/16 18 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 10104585/16 18 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 10104603/8 16 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10104663/8 16 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 10104687/16 14 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 10104741/2 13 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1010482

●

■

● STI Taps are oversized so that the thread they produce will accept a heli-cal coil wire screw thread insert of the same nominal size and pitch

● For use in aluminum, magnesium, and non-ferrous materials

● Screw Thread Insert● Tarauds à main● Hand Tap ● Machos de mano


● Tarauds à main

1572(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 101044210 32 2.1/2 1“ 0.255 0.191 5/16 3 H2 B 101044410 32 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 101044310 32 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10104451/4 28 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10104541/4 28 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10104567/16 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 10104781/2 20 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010486

U1511

U1511

●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 5“ 1.5/8 0.185 0.139 9/16 4 H3 T 10103755/16 18 5.1/2 1.13/16 0.240 0.180 5/8 4 H3 T 10103763/8 16 6“ 2“ 0.294 0.220 11/16 4 H3 T 10103771/2 13 7“ 2.1/2 0.400 0.300 7/8 4 H3 T 1010378

● Hand Tap ● Machos de mano

●

■

● For use in medium to low carbon steel, bronze, aluminum, and brass

● Taps have a relatively long shank smaller than the minor diameter to permit the accumulation of several nuts after tapping

● Nut Style

● STI Taps are oversized so that the thread they produce will accept a heli-cal coil wire screw thread insert of the same nominal size and pitch

● For use in aluminum, magnesium, and non-ferrous materials

● Screw Thread Insert● Tarauds à main● Hand Tap ● Machos de mano


1519(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 6“ 1.000 0.255 0.191 5/16 4 H3 P 10103791/4 20 8“ 1.000 0.255 0.191 5/16 4 H3 P 10103805/16 18 6“ 1.1/8 0.318 0.238 3/8 4 H3 P 10103815/16 18 8“ 1.1/8 0.318 0.238 3/8 4 H3 P 10103823/8 16 6“ 1.1/4 0.381 0.286 7/16 4 H3 P 10103833/8 16 8“ 1.1/4 0.381 0.286 7/16 4 H3 P 10103843/8 16 10“ 1.1/4 0.381 0.286 7/16 4 H3 P 10103857/16 14 6“ 1.7/16 0.444 0.333 1/2 4 H3 P 10103867/16 14 8“ 1.7/16 0.444 0.333 1/2 4 H3 P 10103871/2 13 6“ 1.21/32 0.507 0.380 9/16 4 H3 P 10103881/2 13 8“ 1.21/32 0.507 0.380 9/16 4 H3 P 10103891/2 13 10“ 1.21/32 0.507 0.380 9/16 4 H3 P 10103901/2 13 12“ 1.21/32 0.507 0.380 9/16 4 H3 P 10103915/8 11 6“ 1.13/16 0.633 0.475 11/16 4 H3 P 10103925/8 11 8“ 1.13/16 0.633 0.475 11/16 4 H3 P 10103935/8 11 10“ 1.13/16 0.633 0.475 11/16 4 H3 P 10103945/8 11 12“ 1.13/16 0.633 0.475 11/16 4 H3 P 10103953/4 10 10“ 2.000 0.759 0.569 3/4 4 H3 P 10103963/4 10 12“ 2.000 0.759 0.569 3/4 4 H3 P 1010397

●

● Pulley Style● These taps have the same major

and pitch diameters as standard size taps, but with extended shanks for reaching locations inaccessible to regular length hand taps



1600(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 P 10112561/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 B 10112575/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 P 10112605/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 B 10112613/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 P 10112643/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 B 10112657/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 10112687/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 10112691/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 10112721/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 10112739/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 10112769/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 B 10112775/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 10112805/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 10112813/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 10112843/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 1011285

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code


■●

■ ●

1600(UNF)

● Tarauds à main● Hand Tap● Designed for through or blind tapping

with a specific cutting geometry for gray cast irons and those irons producing broken chips

● Machos de mano


1599(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code


UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code


■●

■ ●

1599(UNF)


with a specific cutting geometry for gray cast irons and other irons producing broken chips

● Machos de mano


● Tarauds à main

1599(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 P 1012256M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 B 1012266M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012258M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012268M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 P 1012260M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 B 1012270M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 P 1012262M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 B 1012272M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D4 P 1010288M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D4 P 1010289

1599SB(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 SB 1012276M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 SB 1012278M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 SB 1012280M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 SB 1012282

● Hand Tap● SB = Semi-Bottoming● Designed for through or blind

tapping with a specific cutting geometry for gray cast irons and those irons producing broken chips

● Machos de mano

■●

■●


with a specific cutting geometry for gray cast irons and those irons producing broken chips

● Machos de mano


E059 - E053

E059

■●

UNC TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

1/4 20 6.35 66 13 6.30 5.00 8 3 5.1 26 0607046 E0591/45/16 18 7.94 72 16 8.00 6.30 9 3 6.6 29 0607053 E0595/163/8 16 9.53 80 18 10.00 8.00 11 3 8 32 0607060 E0593/81/2 13 12.70 89 22 9.00 7.10 10 3 10.8 0607077 E0591/25/8 11 15.88 102 24 12.50 10.00 13 3 13.5 0607084 E0595/83/4 10 19.05 112 29 14.00 11.20 14 3 16.5 0607091 E0593/4

E053

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0606476 E053M34 0.70 53 14 4.00 3.15 6 4 3.3 14 0606483 E053M45 0.80 58 11 5.00 4.00 7 4 4.2 22 0606490 E053M56 1.00 66 13 6.30 5.00 8 4 5 26 0606506 E053M68 1.25 72 16 8.00 6.30 9 4 6.8 29 0606513 E053M810 1.50 80 18 10.00 8.00 11 4 8.5 34 0606520 E053M1012 1.75 89 22 9.00 7.10 10 4 10.3 0606537 E053M1214 2.00 95 24 11.20 9.00 12 4 12 0606544 E053M1416 2.00 102 24 12.50 10.00 13 4 14 0606551 E053M1620 2.50 112 29 14.00 11.20 14 4 17.5 0606568 E053M20

● Machine Tap MTT-X, For Cast Iron ● MTT-X Tarauds machine ● MTT-X Machos de máquina



E054

E054

■●

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

8 1.00 72 16 8.00 6.30 9 4 7 29 0606575 E054M8X1.010 1.00 80 18 10.00 8.00 11 4 9 34 0606582 E054M10X1.010 1.25 80 18 10.00 8.00 11 4 8.8 34 0606599 E054M10X1.2512 1.00 89 22 9.00 7.10 10 4 11 0606605 E054M12X1.012 1.25 89 22 9.00 7.10 10 4 10.8 0606612 E054M12X1.2512 1.50 89 22 9.00 7.10 10 4 10.5 0606629 E054M12X1.514 1.25 95 24 11.20 9.00 12 4 12.8 0606636 E054M14X1.2514 1.50 95 24 11.20 9.00 12 4 12.5 0606643 E054M14X1.516 1.50 102 24 12.50 10.00 13 4 14.5 0606650 E054M16X1.5



E500

E500

●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

1 0.25 38 4.5 2.50 2.00 4 2 0.75 4.5 0160152 E500M1NO11 0.25 38 4.5 2.50 2.00 4 2 0.75 4.5 0160169 E500M1NO21 0.25 38 4.5 2.50 2.00 4 2 0.75 4.5 0122464 E500M1NO31.2 0.25 38 4.5 2.50 2.00 4 2 0.95 4.5 0160176 E500M1.2NO11.2 0.25 38 4.5 2.50 2.00 4 2 0.95 4.5 0160183 E500M1.2NO21.2 0.25 38 4.5 2.50 2.00 4 2 0.95 4.5 0122471 E500M1.2NO31.4 0.30 40 6 2.50 2.00 4 2 1.1 6 0160190 E500M1.4NO11.4 0.30 40 6 2.50 2.00 4 2 1.1 6 0160206 E500M1.4NO21.4 0.30 40 6 2.50 2.00 4 2 1.1 6 0122488 E500M1.4NO31.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0155035 E500M1.6NO11.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0139950 E500M1.6NO21.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0093900 E500M1.6NO31.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0155028 E500M1.6NO61.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0155004 E500M1.7NO11.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0093924 E500M1.7NO21.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0093931 E500M1.7NO31.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0154991 E500M1.7NO61.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0154960 E500M1.8NO11.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0093948 E500M1.8NO21.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0093955 E500M1.8NO31.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0154953 E500M1.8NO62 0.40 41 8 2.50 2.00 4 3 1.6 8 0094259 E500M2NO12 0.40 41 8 2.50 2.00 4 3 1.6 8 0094266 E500M2NO22 0.40 41 8 2.50 2.00 4 3 1.6 8 0094273 E500M2NO32 0.40 41 8 2.50 2.00 4 3 1.6 8 0154939 E500M2NO62 0.45 41 8 2.50 2.00 4 3 1.55 8 0160244 E500M2X.45NO12 0.45 41 8 2.50 2.00 4 3 1.55 8 0160251 E500M2X.45NO22 0.45 41 8 2.50 2.00 4 3 1.55 8 0160268 E500M2X.45NO32.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0154915 E500M2.2NO12.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0094167 E500M2.2NO22.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0094174 E500M2.2NO32.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0154908 E500M2.2NO62.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0154885 E500M2.3NO12.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0094198 E500M2.3NO22.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0094204 E500M2.3NO32.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0154878 E500M2.3NO62.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0154854 E500M2.5NO12.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0094228 E500M2.5NO2

● Machine Tap, Straight Flute ● Tarauds machine ● Machos de máquina


E500

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

2.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0094235 E500M2.5NO32.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0154847 E500M2.5NO62.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0156735 E500M2.6NO12.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0156742 E500M2.6NO22.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0122440 E500M2.6NO32.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0156759 E500M2.6NO63 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0154823 E500M3NO13 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0094440 E500M3NO23 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0094457 E500M3NO33 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0094464 E500M3NO63 0.60 48 12.5 3.15 2.50 5 3 2.4 12.5 0159927 E500M3X.6NO13 0.60 48 12.5 3.15 2.50 5 3 2.4 12.5 0159934 E500M3X.6NO23 0.60 48 12.5 3.15 2.50 5 3 2.4 12.5 0159941 E500M3X.6NO33.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0094402 E500M3.5NO13.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0094419 E500M3.5NO23.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0094426 E500M3.5NO33.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0154809 E500M3.5NO64 0.70 53 14 4.00 3.15 6 3 3.3 14 0154786 E500M4NO14 0.70 53 14 4.00 3.15 6 3 3.3 14 0094648 E500M4NO24 0.70 53 14 4.00 3.15 6 3 3.3 14 0094655 E500M4NO34 0.70 53 14 4.00 3.15 6 3 3.3 14 0094662 E500M4NO64 0.75 53 14 4.00 3.15 6 3 3.25 14 0160213 E500M4X.75NO14 0.75 53 14 4.00 3.15 6 3 3.25 14 0160220 E500M4X.75NO24 0.75 53 14 4.00 3.15 6 3 3.25 14 0160237 E500M4X.75NO34.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0154762 E500M4.5NO14.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0094617 E500M4.5NO24.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0094624 E500M4.5NO34.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0154755 E500M4.5NO65 0.80 58 11 5.00 4.00 7 3 4.2 22 0154731 E500M5NO15 0.80 58 11 5.00 4.00 7 3 4.2 22 0094761 E500M5NO25 0.80 58 11 5.00 4.00 7 3 4.2 22 0094778 E500M5NO35 0.80 58 11 5.00 4.00 7 3 4.2 22 0154724 E500M5NO65 0.90 58 11 5.00 4.00 7 3 4.1 22 0159958 E500M5X.9NO15 0.90 58 11 5.00 4.00 7 3 4.1 22 0159965 E500M5X.9NO25 0.90 58 11 5.00 4.00 7 3 4.1 22 0159972 E500M5X.9NO35 0.90 58 11 5.00 4.00 7 3 4.1 22 0159989 E500M5X.9NO65.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0159996 E500M5.5X.9NO15.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0160008 E500M5.5X.9NO25.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0160015 E500M5.5X.9NO35.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0160022 E500M5.5X.9NO66 1.00 66 13 6.30 5.00 8 3 5 26 0094808 E500M6NO16 1.00 66 13 6.30 5.00 8 3 5 26 0094815 E500M6NO26 1.00 66 13 6.30 5.00 8 3 5 26 0094822 E500M6NO36 1.00 66 13 6.30 5.00 8 3 5 26 0154700 E500M6NO67 1.00 66 13 7.10 5.60 8 3 6 26 0154687 E500M7NO17 1.00 66 13 7.10 5.60 8 3 6 26 0139967 E500M7NO27 1.00 66 13 7.10 5.60 8 3 6 26 0094846 E500M7NO37 1.00 66 13 7.10 5.60 8 3 6 26 0094853 E500M7NO68 1.25 72 16 8.00 6.30 9 3 6.8 29 0154663 E500M8NO18 1.25 72 16 8.00 6.30 9 3 6.8 29 0094877 E500M8NO28 1.25 72 16 8.00 6.30 9 3 6.8 29 0094884 E500M8NO38 1.25 72 16 8.00 6.30 9 3 6.8 29 0094891 E500M8NO69 1.25 72 16 9.00 7.10 10 3 7.8 29 0154649 E500M9NO19 1.25 72 16 9.00 7.10 10 3 7.8 29 0152119 E500M9NO29 1.25 72 16 9.00 7.10 10 3 7.8 29 0094914 E500M9NO39 1.25 72 16 9.00 7.10 10 3 7.8 29 0154632 E500M9NO610 1.50 80 18 10.00 8.00 11 3 8.5 34 0153246 E500M10NO110 1.50 80 18 10.00 8.00 11 3 8.5 34 0093979 E500M10NO2


E500

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

10 1.50 80 18 10.00 8.00 11 3 8.5 34 0093986 E500M10NO310 1.50 80 18 10.00 8.00 11 3 8.5 34 0154618 E500M10NO611 1.50 85 19 8.00 6.30 9 3 9.5 0154595 E500M11NO111 1.50 85 19 8.00 6.30 9 3 9.5 0094006 E500M11NO211 1.50 85 19 8.00 6.30 9 3 9.5 0094013 E500M11NO311 1.50 85 19 8.00 6.30 9 3 9.5 0154588 E500M11NO611 1.50 85 19 8.00 6.30 9 3 9.5 0094020 E500M11NO812 1.75 89 22 9.00 7.10 10 3 10.3 0094037 E500M12NO212 1.75 89 22 9.00 7.10 10 3 10.3 0094044 E500M12NO312 1.75 89 22 9.00 7.10 10 3 10.3 0094051 E500M12NO614 2.00 95 24 11.20 9.00 12 4 12 0152980 E500M14NO114 2.00 95 24 11.20 9.00 12 4 12 0094075 E500M14NO214 2.00 95 24 11.20 9.00 12 4 12 0094082 E500M14NO314 2.00 95 24 11.20 9.00 12 4 12 0154540 E500M14NO616 2.00 102 24 12.50 10.00 13 4 14 0154526 E500M16NO116 2.00 102 24 12.50 10.00 13 4 14 0094105 E500M16NO216 2.00 102 24 12.50 10.00 13 4 14 0094112 E500M16NO316 2.00 102 24 12.50 10.00 13 4 14 0154519 E500M16NO618 2.50 112 29 14.00 11.20 14 4 15.5 0154496 E500M18NO118 2.50 112 29 14.00 11.20 14 4 15.5 0094136 E500M18NO218 2.50 112 29 14.00 11.20 14 4 15.5 0094143 E500M18NO318 2.50 112 29 14.00 11.20 14 4 15.5 0154489 E500M18NO620 2.50 112 29 14.00 11.20 14 4 17.5 0154465 E500M20NO120 2.50 112 29 14.00 11.20 14 4 17.5 0150719 E500M20NO220 2.50 112 29 14.00 11.20 14 4 17.5 0094297 E500M20NO320 2.50 112 29 14.00 11.20 14 4 17.5 0154458 E500M20NO622 2.50 118 29 16.00 12.50 16 4 19.5 0154434 E500M22NO122 2.50 118 29 16.00 12.50 16 4 19.5 0094310 E500M22NO222 2.50 118 29 16.00 12.50 16 4 19.5 0094327 E500M22NO322 2.50 118 29 16.00 12.50 16 4 19.5 0154427 E500M22NO624 3.00 130 35 18.00 14.00 18 4 21 0154403 E500M24NO124 3.00 130 35 18.00 14.00 18 4 21 0094341 E500M24NO224 3.00 130 35 18.00 14.00 18 4 21 0094358 E500M24NO324 3.00 130 35 18.00 14.00 18 4 21 0154397 E500M24NO627 3.00 135 35 20.00 16.00 20 4 24 0154366 E500M27NO127 3.00 135 35 20.00 16.00 20 4 24 0094365 E500M27NO227 3.00 135 35 20.00 16.00 20 4 24 0094372 E500M27NO330 3.50 138 41 20.00 16.00 20 4 26.5 0154359 E500M30NO130 3.50 138 41 20.00 16.00 20 4 26.5 0094488 E500M30NO230 3.50 138 41 20.00 16.00 20 4 26.5 0094495 E500M30NO333 3.50 151 41 22.40 18.00 22 4 29.5 0154342 E500M33NO133 3.50 151 41 22.40 18.00 22 4 29.5 0152225 E500M33NO233 3.50 151 41 22.40 18.00 22 4 29.5 0094525 E500M33NO336 4.00 162 47 25.00 20.00 24 4 32 0154335 E500M36NO136 4.00 162 47 25.00 20.00 24 4 32 0094549 E500M36NO236 4.00 162 47 25.00 20.00 24 4 32 0094556 E500M36NO339 4.00 170 47 28.00 22.40 26 4 35 0154328 E500M39NO139 4.00 170 47 28.00 22.40 26 4 35 0152232 E500M39NO239 4.00 170 47 28.00 22.40 26 4 35 0094587 E500M39NO342 4.50 170 53 28.00 22.40 26 6 37.5 0154311 E500M42NO142 4.50 170 53 28.00 22.40 26 6 37.5 0152249 E500M42NO242 4.50 170 53 28.00 22.40 26 6 37.5 0094686 E500M42NO345 4.50 187 54 31.50 25.00 28 6 40.5 0154304 E500M45NO145 4.50 187 54 31.50 25.00 28 6 40.5 0152256 E500M45NO245 4.50 187 54 31.50 25.00 28 6 40.5 0094709 E500M45NO348 5.00 187 60 31.50 25.00 28 6 43 0154298 E500M48NO148 5.00 187 60 31.50 25.00 28 6 43 0152263 E500M48NO248 5.00 187 60 31.50 25.00 28 6 43 0094730 E500M48NO3


● Tarauds machine

E500 - E501

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

52 5.00 200 60 35.50 28.00 31 6 47 0153253 E500M52NO152 5.00 200 60 35.50 28.00 31 6 47 0152270 E500M52NO252 5.00 200 60 35.50 28.00 31 6 47 0094792 E500M52NO356 5.50 200 60 35.50 28.00 31 6 50.5 0122457 E500M56NO3

E501

●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0159828 E501M3NO13 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0095058 E501M3NO23 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0095065 E501M3NO34 0.70 53 14 4.00 3.15 6 3 3.3 14 0159835 E501M4NO14 0.70 53 14 4.00 3.15 6 3 3.3 14 0095072 E501M4NO24 0.70 53 14 4.00 3.15 6 3 3.3 14 0095089 E501M4NO35 0.80 58 11 5.00 4.00 7 3 4.2 22 0159842 E501M5NO15 0.80 58 11 5.00 4.00 7 3 4.2 22 0095096 E501M5NO25 0.80 58 11 5.00 4.00 7 3 4.2 22 0095102 E501M5NO36 1.00 66 13 6.30 5.00 8 3 5 26 0159859 E501M6NO16 1.00 66 13 6.30 5.00 8 3 5 26 0095119 E501M6NO26 1.00 66 13 6.30 5.00 8 3 5 26 0095126 E501M6NO38 1.25 72 16 8.00 6.30 9 3 6.8 29 0159866 E501M8NO18 1.25 72 16 8.00 6.30 9 3 6.8 29 0095133 E501M8NO28 1.25 72 16 8.00 6.30 9 3 6.8 29 0095140 E501M8NO310 1.50 80 18 10.00 8.00 11 3 8.5 34 0159873 E501M10NO110 1.50 80 18 10.00 8.00 11 3 8.5 34 0094938 E501M10NO210 1.50 80 18 10.00 8.00 11 3 8.5 34 0094945 E501M10NO312 1.75 89 22 9.00 7.10 10 3 10.3 0159880 E501M12NO112 1.75 89 22 9.00 7.10 10 3 10.3 0094952 E501M12NO212 1.75 89 22 9.00 7.10 10 3 10.3 0094969 E501M12NO314 2.00 95 24 11.20 9.00 12 4 12 0159897 E501M14NO114 2.00 95 24 11.20 9.00 12 4 12 0094976 E501M14NO214 2.00 95 24 11.20 9.00 12 4 12 0094983 E501M14NO316 2.00 102 24 12.50 10.00 13 4 14 0159903 E501M16NO116 2.00 102 24 12.50 10.00 13 4 14 0094990 E501M16NO216 2.00 102 24 12.50 10.00 13 4 14 0095003 E501M16NO318 2.50 112 29 14.00 11.20 14 4 15.5 0152423 E501M18NO218 2.50 112 29 14.00 11.20 14 4 15.5 0095010 E501M18NO320 2.50 112 29 14.00 11.20 14 4 17.5 0159910 E501M20NO120 2.50 112 29 14.00 11.20 14 4 17.5 0095027 E501M20NO220 2.50 112 29 14.00 11.20 14 4 17.5 0095034 E501M20NO322 2.50 118 29 16.00 12.50 16 4 19.5 0152430 E501M22NO222 2.50 118 29 16.00 12.50 16 4 19.5 0122495 E501M22NO324 3.00 130 35 18.00 14.00 18 4 21 0152447 E501M24NO224 3.00 130 35 18.00 14.00 18 4 21 0095041 E501M24NO3

● Machine Tap ● Machos de máquina● Straight Flute, Left Hand


E513

E513

●

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.35 48 12.5 3.15 2.50 5 3 2.65 12.5 0160039 E513M3X.35NO13 0.35 48 12.5 3.15 2.50 5 3 2.65 12.5 0160046 E513M3X.35NO23 0.35 48 12.5 3.15 2.50 5 3 2.65 12.5 0096567 E513M3X.35NO33.5 0.35 48 12.5 3.15 2.50 5 3 3.2 12.5 0343111 E513M3.5X.35NO34 0.50 53 14 4.00 3.15 6 3 3.5 14 0156766 E513M4X.5NO14 0.50 53 14 4.00 3.15 6 3 3.5 14 0152454 E513M4X.5NO24 0.50 53 14 4.00 3.15 6 3 3.5 14 0096680 E513M4X.5NO35 0.50 58 11 5.00 4.00 7 3 4.5 22 0156728 E513M5X.5NO15 0.50 58 11 5.00 4.00 7 3 4.5 22 0096727 E513M5X.5NO25 0.50 58 11 5.00 4.00 7 3 4.5 22 0096734 E513M5X.5NO35 0.75 58 11 5.00 4.00 7 3 4.3 22 0157046 E513M5X.75NO15 0.75 58 11 5.00 4.00 7 3 4.3 22 0156773 E513M5X.75NO25 0.75 58 11 5.00 4.00 7 3 4.3 22 0123027 E513M5X.75NO36 0.50 66 13 6.30 5.00 8 3 5.5 26 0156780 E513M6X.5NO16 0.50 66 13 6.30 5.00 8 3 5.5 26 0156797 E513M6X.5NO26 0.50 66 13 6.30 5.00 8 3 5.5 26 0123034 E513M6X.5NO36 0.75 66 13 6.30 5.00 8 3 5.3 26 0156803 E513M6X.75NO16 0.75 66 13 6.30 5.00 8 3 5.3 26 0152461 E513M6X.75NO26 0.75 66 13 6.30 5.00 8 3 5.3 26 0096765 E513M6X.75NO37 0.75 66 13 7.10 5.60 8 3 6.3 26 0160053 E513M7X.75NO17 0.75 66 13 7.10 5.60 8 3 6.3 26 0096789 E513M7X.75NO27 0.75 66 13 7.10 5.60 8 3 6.3 26 0096796 E513M7X.75NO38 0.50 72 16 8.00 6.30 9 3 7.5 29 0160060 E513M8X.5NO18 0.50 72 16 8.00 6.30 9 3 7.5 29 0160077 E513M8X.5NO28 0.50 72 16 8.00 6.30 9 3 7.5 29 0123058 E513M8X.5NO38 0.75 72 16 8.00 6.30 9 3 7.3 29 0157053 E513M8X.75NO18 0.75 72 16 8.00 6.30 9 3 7.3 29 0152478 E513M8X.75NO28 0.75 72 16 8.00 6.30 9 3 7.3 29 0096802 E513M8X.75NO38 1.00 72 16 8.00 6.30 9 3 7 29 0157060 E513M8X1.0NO18 1.00 72 16 8.00 6.30 9 3 7 29 0152485 E513M8X1.0NO28 1.00 72 16 8.00 6.30 9 3 7 29 0096826 E513M8X1.0NO39 0.75 72 16 9.00 7.10 10 3 8.3 29 0343128 E513M9X.75NO39 1.00 72 16 9.00 7.10 10 3 8 29 0159644 E513M9X1.0NO1

● Machine Tap, Straight Flute ● Tarauds machine ● Machos de máquina


E513

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

9 1.00 72 16 9.00 7.10 10 3 8 29 0155752 E513M9X1.0NO29 1.00 72 16 9.00 7.10 10 3 8 29 0096833 E513M9X1.0NO310 0.50 80 18 10.00 8.00 11 3 9.5 34 0343135 E513M10X.5NO310 0.75 80 18 10.00 8.00 11 3 9.3 34 0160084 E513M10X.75NO110 0.75 80 18 10.00 8.00 11 3 9.3 34 0160091 E513M10X.75NO210 0.75 80 18 10.00 8.00 11 3 9.3 34 0123065 E513M10X.75NO310 1.00 80 18 10.00 8.00 11 3 9 34 0157077 E513M10X1.0NO110 1.00 80 18 10.00 8.00 11 3 9 34 0152492 E513M10X1.0NO210 1.00 80 18 10.00 8.00 11 3 9 34 0096086 E513M10X1.0NO310 1.00 80 18 10.00 8.00 11 3 9 34 0157084 E513M10X1.0NO610 1.25 80 18 10.00 8.00 11 3 8.8 34 0157091 E513M10X1.25NO110 1.25 80 18 10.00 8.00 11 3 8.8 34 0152508 E513M10X1.25NO210 1.25 80 18 10.00 8.00 11 3 8.8 34 0096079 E513M10X1.25NO310 1.25 80 18 10.00 8.00 11 3 8.8 34 0157107 E513M10X1.25NO611 0.75 85 19 8.00 6.30 9 3 10.3 0160107 E513M11X.75NO111 0.75 85 19 8.00 6.30 9 3 10.3 0160114 E513M11X.75NO211 0.75 85 19 8.00 6.30 9 3 10.3 0123072 E513M11X.75NO311 1.00 85 19 8.00 6.30 9 3 10 0159651 E513M11X1.0NO111 1.00 85 19 8.00 6.30 9 3 10 0096093 E513M11X1.0NO211 1.00 85 19 8.00 6.30 9 3 10 0096109 E513M11X1.0NO311 1.25 85 19 8.00 6.30 9 3 9.8 0343142 E513M11X1.25NO312 0.75 89 22 9.00 7.10 10 3 11.3 0343166 E513M12X.75NO312 1.00 89 22 9.00 7.10 10 3 11 0157114 E513M12X1.0NO112 1.00 89 22 9.00 7.10 10 3 11 0152515 E513M12X1.0NO212 1.00 89 22 9.00 7.10 10 3 11 0096154 E513M12X1.0NO312 1.25 89 22 9.00 7.10 10 3 10.8 0157121 E513M12X1.25NO112 1.25 89 22 9.00 7.10 10 3 10.8 0152522 E513M12X1.25NO212 1.25 89 22 9.00 7.10 10 3 10.8 0096116 E513M12X1.25NO312 1.25 89 22 9.00 7.10 10 3 10.8 0157138 E513M12X1.25NO612 1.50 89 22 9.00 7.10 10 3 10.5 0157145 E513M12X1.5NO112 1.50 89 22 9.00 7.10 10 3 10.5 0096130 E513M12X1.5NO212 1.50 89 22 9.00 7.10 10 3 10.5 0096147 E513M12X1.5NO312 1.50 89 22 9.00 7.10 10 3 10.5 0157152 E513M12X1.5NO613 1.50 89 22 9.00 7.10 10 3 11.5 0343173 E513M13X1.5NO314 1.00 95 24 11.20 9.00 12 4 13 0156810 E513M14X1.0NO114 1.00 95 24 11.20 9.00 12 4 13 0152539 E513M14X1.0NO214 1.00 95 24 11.20 9.00 12 4 13 0096185 E513M14X1.0NO314 1.25 95 24 11.20 9.00 12 4 12.8 0156827 E513M14X1.25NO114 1.25 95 24 11.20 9.00 12 4 12.8 0152546 E513M14X1.25NO214 1.25 95 24 11.20 9.00 12 4 12.8 0096161 E513M14X1.25NO314 1.25 95 24 11.20 9.00 12 4 12.8 0156834 E513M14X1.25NO614 1.50 95 24 11.20 9.00 12 4 12.5 0156841 E513M14X1.5NO114 1.50 95 24 11.20 9.00 12 4 12.5 0152553 E513M14X1.5NO214 1.50 95 24 11.20 9.00 12 4 12.5 0096178 E513M14X1.5NO314 1.50 95 24 11.20 9.00 12 4 12.5 0156858 E513M14X1.5NO615 1.50 95 24 11.20 9.00 12 4 13.5 0096192 E513M15X1.5NO215 1.50 95 24 11.20 9.00 12 4 13.5 0096208 E513M15X1.5NO316 1.00 102 24 12.50 10.00 13 4 15 0156865 E513M16X1.0NO116 1.00 102 24 12.50 10.00 13 4 15 0152560 E513M16X1.0NO2


E513

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

16 1.00 102 24 12.50 10.00 13 4 15 0096246 E513M16X1.0NO316 1.25 102 24 12.50 10.00 13 4 14.8 0343203 E513M16X1.25NO316 1.50 102 24 12.50 10.00 13 4 14.5 0156872 E513M16X1.5NO116 1.50 102 24 12.50 10.00 13 4 14.5 0152577 E513M16X1.5NO216 1.50 102 24 12.50 10.00 13 4 14.5 0096222 E513M16X1.5NO316 1.50 102 24 12.50 10.00 13 4 14.5 0156889 E513M16X1.5NO618 1.00 112 29 14.00 11.20 14 4 17 0156896 E513M18X1.0NO118 1.00 112 29 14.00 11.20 14 4 17 0096277 E513M18X1.0NO218 1.00 112 29 14.00 11.20 14 4 17 0096284 E513M18X1.0NO318 1.50 112 29 14.00 11.20 14 4 16.5 0156902 E513M18X1.5NO118 1.50 112 29 14.00 11.20 14 4 16.5 0152584 E513M18X1.5NO218 1.50 112 29 14.00 11.20 14 4 16.5 0096260 E513M18X1.5NO318 1.50 112 29 14.00 11.20 14 4 16.5 0156919 E513M18X1.5NO618 2.00 112 29 14.00 11.20 14 4 16 0156926 E513M18X2.0NO118 2.00 112 29 14.00 11.20 14 4 16 0096307 E513M18X2.0NO218 2.00 112 29 14.00 11.20 14 4 16 0096314 E513M18X2.0NO320 1.00 112 29 14.00 11.20 14 4 19 0156933 E513M20X1.0NO120 1.00 112 29 14.00 11.20 14 4 19 0096345 E513M20X1.0NO220 1.00 112 29 14.00 11.20 14 4 19 0096352 E513M20X1.0NO320 1.50 112 29 14.00 11.20 14 4 18.5 0156940 E513M20X1.5NO120 1.50 112 29 14.00 11.20 14 4 18.5 0152591 E513M20X1.5NO220 1.50 112 29 14.00 11.20 14 4 18.5 0096338 E513M20X1.5NO320 1.50 112 29 14.00 11.20 14 4 18.5 0156957 E513M20X1.5NO620 2.00 112 29 14.00 11.20 14 4 18 0156964 E513M20X2.0NO120 2.00 112 29 14.00 11.20 14 4 18 0096376 E513M20X2.0NO220 2.00 112 29 14.00 11.20 14 4 18 0096383 E513M20X2.0NO322 1.00 118 29 16.00 12.50 16 4 21 0096406 E513M22X1.0NO222 1.00 118 29 16.00 12.50 16 4 21 0096413 E513M22X1.0NO322 1.50 118 29 16.00 12.50 16 4 20.5 0156971 E513M22X1.5NO122 1.50 118 29 16.00 12.50 16 4 20.5 0152607 E513M22X1.5NO222 1.50 118 29 16.00 12.50 16 4 20.5 0096390 E513M22X1.5NO322 2.00 118 29 16.00 12.50 16 4 20 0156988 E513M22X2.0NO122 2.00 118 29 16.00 12.50 16 4 20 0096420 E513M22X2.0NO222 2.00 118 29 16.00 12.50 16 4 20 0096437 E513M22X2.0NO324 1.00 130 35 18.00 14.00 18 4 23 0096475 E513M24X1.0NO224 1.00 130 35 18.00 14.00 18 4 23 0096482 E513M24X1.0NO324 1.50 130 35 18.00 14.00 18 4 22.5 0156995 E513M24X1.5NO124 1.50 130 35 18.00 14.00 18 4 22.5 0152614 E513M24X1.5NO224 1.50 130 35 18.00 14.00 18 4 22.5 0096451 E513M24X1.5NO324 2.00 130 35 18.00 14.00 18 4 22 0157008 E513M24X2.0NO124 2.00 130 35 18.00 14.00 18 4 22 0096499 E513M24X2.0NO224 2.00 130 35 18.00 14.00 18 4 22 0096505 E513M24X2.0NO325 1.50 130 35 18.00 14.00 18 4 23.5 0157015 E513M25X1.5NO125 1.50 130 35 18.00 14.00 18 4 23.5 0152621 E513M25X1.5NO225 1.50 130 35 18.00 14.00 18 4 23.5 0096512 E513M25X1.5NO3


E513

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

25 1.50 130 35 18.00 14.00 18 4 23.5 0157022 E513M25X1.5NO626 1.50 130 35 18.00 14.00 18 4 24.5 0096529 E513M26X1.5NO226 1.50 130 35 18.00 14.00 18 4 24.5 0096536 E513M26X1.5NO327 1.50 135 35 20.00 16.00 20 4 25.5 0155738 E513M27X1.5NO227 1.50 135 35 20.00 16.00 20 4 25.5 0123010 E513M27X1.5NO327 2.00 135 35 20.00 16.00 20 4 25 0123041 E513M27X2.0NO328 1.50 138 35 20.00 16.00 20 4 26.5 0096543 E513M28X1.5NO228 1.50 138 35 20.00 16.00 20 4 26.5 0096550 E513M28X1.5NO330 1.50 138 41 20.00 16.00 20 4 28.5 0096574 E513M30X1.5NO230 1.50 138 41 20.00 16.00 20 4 28.5 0096581 E513M30X1.5NO330 2.00 138 41 20.00 16.00 20 4 28 0155721 E513M30X2.0NO230 2.00 138 41 20.00 16.00 20 4 28 0123003 E513M30X2.0NO332 1.50 151 41 22.40 18.00 22 4 30.5 0157039 E513M32X1.5NO132 1.50 151 41 22.40 18.00 22 4 30.5 0155578 E513M32X1.5NO232 1.50 151 41 22.40 18.00 22 4 30.5 0096598 E513M32X1.5NO333 2.00 151 41 22.40 18.00 22 4 31 0096604 E513M33X2.0NO233 2.00 151 41 22.40 18.00 22 4 31 0096611 E513M33X2.0NO335 1.50 162 47 25.00 20.00 24 4 33.5 0096628 E513M35X1.5NO235 1.50 162 47 25.00 20.00 24 4 33.5 0096635 E513M35X1.5NO336 1.50 162 47 25.00 20.00 24 4 34.5 0343302 E513M36X1.5NO336 2.00 162 47 25.00 20.00 24 4 34 0152638 E513M36X2.0NO236 2.00 162 47 25.00 20.00 24 4 34 0096642 E513M36X2.0NO336 3.00 162 47 25.00 20.00 24 4 33 0096659 E513M36X3.0NO236 3.00 162 47 25.00 20.00 24 4 33 0096666 E513M36X3.0NO339 3.00 170 47 28.00 22.40 26 4 36 0152645 E513M39X3.0NO239 3.00 170 47 28.00 22.40 26 4 36 0096673 E513M39X3.0NO340 1.50 170 53 28.00 22.40 26 6 38.5 0155691 E513M40X1.5NO240 1.50 170 53 28.00 22.40 26 6 38.5 0096697 E513M40X1.5NO342 1.50 170 53 28.00 22.40 26 6 40.5 0155684 E513M42X1.5NO242 1.50 170 53 28.00 22.40 26 6 40.5 0096703 E513M42X1.5NO342 3.00 170 53 28.00 22.40 26 6 39 0343319 E513M42X3.0NO345 1.50 187 54 31.50 25.00 28 6 43.5 0155677 E513M45X1.5NO245 1.50 187 54 31.50 25.00 28 6 43.5 0096710 E513M45X1.5NO348 1.50 187 60 31.50 25.00 28 6 46.5 0343333 E513M48X1.5NO348 2.00 187 60 31.50 25.00 28 6 46 0343340 E513M48X2.0NO348 3.00 187 60 31.50 25.00 28 6 45 0343357 E513M48X3.0NO350 1.50 187 60 31.50 25.00 28 6 48.5 0155660 E513M50X1.5NO250 1.50 187 60 31.50 25.00 28 6 48.5 0096758 E513M50X1.5NO3


● MTT-X Tarauds machine

E025

E025

■●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

6 32 2“ 0.2610 0.1410 0.1100 2 H2 N36 2.85 0.5938 0581070 E0256-328 32 2.1/8 0.2484 0.1680 0.1310 2 H2 N29 3.50 0.6526 0581087 E0258-3210 24 2.3/8 0.4303 0.1940 0.1520 2 H3 N25 3.90 0.8434 0581094 E02510-2412 24 2.3/8 0.4173 0.2200 0.1650 2 H3 N16 4.50 0.8848 0581100 E02512-241/4 20 2.1/2 0.5075 0.2550 0.1910 2 H3 N7 5.10 1.0073 0581117 E0251/41/4 20 2.1/2 0.5075 0.2550 0.1910 3 H3 N7 5.10 1.0073 0581124 E0251/43FL5/16 18 2.23/32 0.5939 0.3180 0.2380 2 H3 F 6.60 1.1891 0581131 E0255/165/16 18 2.23/32 0.5939 0.3180 0.2380 3 H3 F 6.60 1.1891 0581148 E0255/163FL3/8 16 2.15/16 0.6020 0.3810 0.2860 2 H3 5/16 8.00 1.2915 0581155 E0253/83/8 16 2.15/16 0.6020 0.3810 0.2860 3 H3 5/16 8.00 1.2915 0581162 E0253/83FL7/16 14 3.5/32 0.9055 0.3230 0.2420 3 H3 U 9.40 0581179 E0257/161/2 13 3.3/8 0.9055 0.3670 0.2750 2 H3 27/64 10.80 0581186 E0251/21/2 13 3.3/8 0.9055 0.3670 0.2750 3 H3 27/64 10.80 0581193 E0251/23FL9/16 12 3.19/32 0.9843 0.4290 0.3220 3 H3 31/64 12.20 0581209 E0259/165/8 11 3.13/16 0.9843 0.4800 0.3600 3 H3 17/32 13.50 0581216 E0255/83/4 10 4.1/4 1.1614 0.5900 0.4420 3 H4 21/32 16.50 0581223 E0253/47/8 9 4.11/16 1.1614 0.6970 0.5230 3 H4 49/64 19.50 0581230 E0257/81“ 8 5.1/8 1.3976 0.8000 0.6000 3 H4 7/8 22.25 0581247 E0251

● Machine Tap MTT-X, Spiral Point ● MTT-X Machos de máquina


UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

mm Stock #

EDP #ore-Code

6 40 2“ 0.2610 0.1410 0.1100 2 H2 N33 2.95 0.5938 0581957 E0356-408 36 2.1/8 0.2484 0.1680 0.1310 2 H2 N29 3.50 0.6526 0581964 E0358-3610 32 2.3/8 0.4303 0.1940 0.1520 2 H2 N21 4.10 0.8434 0581971 E03510-3212 28 2.3/8 0.4173 0.2200 0.1650 2 H3 N14 4.70 0.8848 0581988 E03512-281/4 28 2.1/2 0.5075 0.2550 0.1910 2 H3 N3 5.50 1.0073 0581995 E0351/41/4 28 2.1/2 0.5075 0.2550 0.1910 3 H3 N3 5.50 1.0073 0582008 E0351/43FL5/16 24 2.23/32 0.5939 0.3180 0.2380 2 H3 I 6.90 1.1891 0582015 E0355/165/16 24 2.23/32 0.5939 0.3180 0.2380 3 H3 I 6.90 1.1891 0582022 E0355/163FL3/8 24 2.15/16 0.6020 0.3810 0.2860 2 H3 Q 8.50 1.2915 0582039 E0353/83/8 24 2.15/16 0.6020 0.3810 0.2860 3 H3 Q 8.50 1.2915 0582046 E0353/83FL7/16 20 3.5/32 0.9055 0.3230 0.2420 3 H3 25/64 9.90 0582053 E0357/163FL1/2 20 3.3/8 0.9055 0.3670 0.2750 2 H3 29/64 11.50 0582060 E0351/21/2 20 3.3/8 0.9055 0.3670 0.2750 3 H3 29/64 11.50 0582077 E0351/23FL9/16 18 3.19/32 0.9843 0.4290 0.3220 3 H3 33/64 12.90 0582084 E0359/165/8 18 3.13/16 0.9843 0.4800 0.3600 3 H3 37/64 14.50 0582091 E0355/83/4 16 4.1/4 1.1614 0.5900 0.4420 3 H3 11/16 17.50 0582107 E0353/47/8 14 4.11/16 1.1614 0.6970 0.5230 3 H4 13/16 20.40 0582114 E0357/81“ 12 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.25 0582121 E0351-121“ 14 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.50 0582138 E0351-14

E035

● Machine Tap MTT-X, Spiral Point ● MTT-X Machos de máquina

E035

■●


E026

E026

■●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

2 56 1.3/4 0.3140 0.1410 0.1100 2 H2 N50 1.80 0.3140 0583203 E0262-564 40 1.7/8 0.6091 0.1410 0.1100 2 H2 N43 2.35 0.6091 0581254 E0264-405 40 1.15/16 0.7404 0.1410 0.1100 2 H2 N38 2.65 0.7404 0581261 E0265-406 32 2“ 0.2610 0.1410 0.1100 2 H2 N36 2.85 0.5938 0581278 E0266-328 32 2.1/8 0.2484 0.1680 0.1310 2 H2 N29 3.50 0.6526 0581285 E0268-3210 24 2.3/8 0.4303 0.1940 0.1520 2 H3 N25 3.90 0.8434 0581292 E02610-2412 24 2.3/8 0.4173 0.2200 0.1650 2 H3 N16 4.50 0.8848 0581308 E02612-241/4 20 2.1/2 0.5075 0.2550 0.1910 2 H3 N7 5.10 1.0073 0581315 E0261/41/4 20 2.1/2 0.5075 0.2550 0.1910 3 H3 N7 5.10 1.0073 0581339 E0261/43FL1/4 20 2.1/2 0.5075 0.2550 0.1910 3 H11 7 5.10 1.0073 0581322 E0261/4H11 1)

5/16 18 2.23/32 0.5939 0.3180 0.2380 2 H3 F 6.60 1.1891 0581346 E0265/165/16 18 2.23/32 0.5939 0.3180 0.2380 3 H3 F 6.60 1.1891 0581360 E0265/163FL5/16 18 2.23/32 0.5939 0.3180 0.2380 3 H11 F 6.60 1.1891 0581353 E0265/16H11 1)

3/8 16 2.15/16 0.6020 0.3810 0.2860 2 H3 5/16 8.00 1.2915 0581377 E0263/83/8 16 2.15/16 0.6020 0.3810 0.2860 3 H3 5/16 8.00 1.2915 0581391 E0263/83FL3/8 16 2.15/16 0.6020 0.3810 0.2860 3 H11 5/16 8.00 1.2915 0581384 E0263/8H11 1)

7/16 14 3.5/32 0.9055 0.3230 0.2420 3 H3 U 9.40 0581407 E0267/161/2 13 3.3/8 0.9055 0.3670 0.2750 2 H3 27/64 10.80 0581414 E0261/21/2 13 3.3/8 0.9055 0.3670 0.2750 3 H3 27/64 10.80 0581438 E0261/23FL1/2 13 3.3/8 0.9055 0.3670 0.2750 3 H11 27/64 10.80 0581421 E0261/2H11 1)

9/16 12 3.19/32 0.9843 0.4290 0.3220 3 H3 31/64 12.20 0581445 E0269/165/8 11 3.13/16 0.9843 0.4800 0.3600 3 H3 17/32 13.50 0581469 E0265/85/8 11 3.13/16 0.9843 0.4800 0.3600 3 H11 17/32 13.50 0581452 E0265/8H11 1)

3/4 10 4.1/4 1.1614 0.5900 0.4420 3 H4 21/32 16.50 0581476 E0263/47/8 9 4.11/16 1.1614 0.6970 0.5230 3 H4 49/64 19.50 0581483 E0267/81“ 8 5.1/8 1.3976 0.8000 0.6000 3 H4 7/8 22.25 0581490 E0261

1) Oversize +.005”, not 3B

● Machine Tap MTT-X, Spiral Point ● MTT-X Tarauds machine ● MTT-X Machos de máquina


E036

E036

■●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

mm Stock #

EDP #ore-Code

10 32 2.3/8 0.4303 0.1940 0.1520 2 H2 N21 4.10 0.8434 0582145 E03610-3212 28 2.3/8 0.4173 0.2200 0.1650 2 H3 N14 4.70 0.8848 0582152 E03612-28 1)

1/4 28 2.1/2 0.5075 0.2550 0.1910 2 H3 N3 5.50 1.0073 0582169 E0361/41/4 28 2.1/2 0.5075 0.2550 0.1910 3 H3 N3 5.50 1.0073 0582176 E0361/43FL5/16 24 2.23/32 0.5939 0.3180 0.2380 2 H3 I 6.90 1.1891 0582183 E0365/165/16 24 2.23/32 0.5939 0.3180 0.2380 3 H3 I 6.90 1.1891 0582190 E0365/163FL3/8 24 2.15/16 0.6020 0.3810 0.2860 2 H3 Q 8.50 1.2915 0582206 E0363/83/8 24 2.15/16 0.6020 0.3810 0.2860 3 H3 Q 8.50 1.2915 0582213 E0363/83FL7/16 20 3.5/32 0.9055 0.3230 0.2420 3 H3 25/64 9.90 0582220 E0367/163FL1/2 20 3.3/8 0.9055 0.3670 0.2750 2 H3 29/64 11.50 0582237 E0361/21/2 20 3.3/8 0.9055 0.3670 0.2750 3 H3 29/64 11.50 0582244 E0361/23FL9/16 18 3.19/32 0.9843 0.4290 0.3220 3 H3 33/64 12.90 0582251 E0369/165/8 18 3.13/16 0.9843 0.4800 0.3600 3 H3 37/64 14.50 0582268 E0365/83/4 16 4.1/4 1.1614 0.5900 0.4420 3 H3 11/16 17.50 0582275 E0363/47/8 14 4.11/16 1.1614 0.6970 0.5230 3 H4 13/16 20.40 0582282 E0367/81“ 12 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.25 0582299 E0361-12 1)

1“ 14 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.50 0582305 E0361-14




E005

E005

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Stock #

EDP #ore-Code

4 0.70 2.1/8 0.2484 0.1680 0.1310 2 3.3 0.6526 N30 0580301 E005M44 0.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0580318 E005M43FL5 0.80 2.3/8 0.4303 0.1940 0.1520 2 4.2 0.8434 N19 0580325 E005M55 0.80 2.3/8 0.4303 0.1940 0.1520 3 4.2 0.8434 N19 0580332 E005M53FL6 1.00 2.1/2 0.5075 0.2550 0.1910 2 5.0 1.0073 N9 0580349 E005M66 1.00 2.1/2 0.5075 0.2550 0.1910 3 5.0 1.0073 N9 0580356 E005M63FL8 1.25 2.23/32 0.5939 0.3180 0.2380 2 6.8 1.1891 H 0580363 E005M88 1.25 2.23/32 0.5939 0.3180 0.2380 3 6.8 1.1891 H 0580370 E005M83FL10 1.50 2.15/16 0.6020 0.3810 0.2860 2 8.5 1.2915 Q 0580387 E005M1010 1.50 2.15/16 0.6020 0.3810 0.2860 3 8.5 1.2915 Q 0580394 E005M103FL12 1.75 3.3/8 0.9055 0.3670 0.2750 2 10.3 Y 0580400 E005M1212 1.75 3.3/8 0.9055 0.3670 0.2750 3 10.3 Y 0580417 E005M123FL14 2.00 3.19/32 0.9843 0.4290 0.3220 3 12.0 15/32 0580424 E005M14 1)

16 2.00 3.13/16 0.9843 0.4800 0.3600 3 14.0 35/64 0580431 E005M1618 2.50 4.1/32 1.1614 0.5420 0.4060 3 15.5 39/64 0580448 E005M18 1)

20 2.50 4.15/32 1.1614 0.6520 0.4890 3 17.5 11/16 0580455 E005M20 1)

■

●




E006

E006

■●

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Stock #

EDP #ore-Code

4 0.70 2.1/8 0.2484 0.1680 0.1310 2 3.3 0.6526 N30 0580462 E006M44 0.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0583180 E006M43FL5 0.80 2.3/8 0.4303 0.1940 0.1520 2 4.2 0.8434 N19 0580479 E006M55 0.80 2.3/8 0.4303 0.1940 0.1520 3 4.2 0.8434 N19 0580486 E006M53FL6 1.00 2.1/2 0.5075 0.2550 0.1910 2 5.0 1.0073 N9 0580493 E006M66 1.00 2.1/2 0.5075 0.2550 0.1910 3 5.0 1.0073 N9 0580509 E006M63FL8 1.25 2.23/32 0.5939 0.3180 0.2380 2 6.8 1.1891 H 0580516 E006M88 1.25 2.23/32 0.5939 0.3180 0.2380 3 6.8 1.1891 H 0583197 E006M83FL10 1.50 2.15/16 0.6020 0.3810 0.2860 2 8.5 1.2915 Q 0580523 E006M1010 1.50 2.15/16 0.6020 0.3810 0.2860 3 8.5 1.2915 Q 0580530 E006M103FL12 1.75 3.3/8 0.9055 0.3670 0.2750 2 10.3 Y 0580547 E006M1212 1.75 3.3/8 0.9055 0.3670 0.2750 3 10.3 Y 0580554 E006M123FL14 2.00 3.19/32 0.9843 0.4290 0.3220 3 12.0 15/32 0580561 E006M1416 2.00 3.13/16 0.9843 0.4800 0.3600 3 14.0 35/64 0580578 E006M1618 2.50 4.1/32 1.1614 0.5420 0.4060 3 15.5 39/64 0580585 E006M18 1)

20 2.50 4.15/32 1.1614 0.6520 0.4890 3 17.5 11/16 0580592 E006M20




E015

E015

■●

MFPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Stock #

EDP #ore-Code

8 1.00 2.23/32 0.5939 0.3180 0.2380 3 7.0 1.1891 J 0580912 E015M8X1.010 1.00 2.15/16 0.6020 0.3810 0.2860 3 9.0 1.2915 T 0580929 E015M10X1.014 1.50 3.19/32 0.9843 0.4290 0.3220 3 12.5 31/64 0580936 E015M14X1.518 1.50 4.1/32 1.1614 0.5420 0.4060 3 16.5 41/64 0580943 E015M18X1.5 1)

E016

E016

■

●

MFPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Stock #

EDP #ore-Code

8 1.00 2.23/32 0.5939 0.3180 0.2380 3 7.0 1.1891 J 0580950 E016M8X1.010 1.00 2.15/16 0.6020 0.3810 0.2860 3 9.0 1.2915 T 0580967 E016M10X1.014 1.50 3.19/32 0.9843 0.4290 0.3220 3 12.5 31/64 0580974 E016M14X1.518 1.50 4.1/32 1.1614 0.5420 0.4060 3 16.5 41/64 0580981 E016M18X1.5 1)


● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral Point



E000

E000

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 15 3.15 2.50 5 3 2.5 12.5 0567586 E000M33.5 0.60 50 16 3.55 2.80 5 3 2.9 14 0567593 E000M3.54 0.70 53 17 4.00 3.15 6 3 3.3 14 0567609 E000M45 0.80 58 11 5.00 4.00 7 3 4.2 22 0567616 E000M56 1.00 66 13 6.30 5.00 8 3 5.0 26 0567623 E000M68 1.25 72 16 8.00 6.30 9 3 6.8 29 0567630 E000M810 1.50 80 18 10.00 8.00 11 3 8.5 34 0567647 E000M1012 1.75 89 22 9.00 7.10 10 3 10.3 0567654 E000M1214 2.00 95 24 11.20 9.00 12 3 12.0 0567661 E000M1416 2.00 102 24 12.50 10.00 13 3 14.0 0567678 E000M1618 2.50 112 29 14.00 11.20 14 4 15.5 0567685 E000M1820 2.50 112 29 14.00 11.20 14 4 17.5 0567692 E000M2022 2.50 118 29 16.00 12.50 16 4 19.5 0567708 E000M2224 3.00 130 35 18.00 14.00 18 4 21.0 0567715 E000M24



E001

E001

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code




E010

E010

■

●

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

4 0.50 53 17 4.00 3.15 6 3 3.5 14 0568149 E010M4X.55 0.50 58 11 5.00 4.00 7 3 4.5 22 0568156 E010M5X.56 0.50 66 13 6.30 5.00 8 3 5.5 26 0568163 E010M6X.56 0.75 66 13 6.30 5.00 8 3 5.3 26 0568170 E010M6X.758 0.75 72 16 8.00 6.30 9 3 7.3 29 0568187 E010M8X.758 1.00 72 16 8.00 6.30 9 3 7.0 29 0568194 E010M8X1.010 1.00 80 18 10.00 8.00 11 3 9.0 34 0568200 E010M10X1.010 1.25 80 18 10.00 8.00 11 3 8.8 34 0568217 E010M10X1.2512 1.00 89 22 9.00 7.10 10 3 11.0 0568224 E010M12X1.012 1.25 89 22 9.00 7.10 10 3 10.8 0568231 E010M12X1.2512 1.50 89 22 9.00 7.10 10 3 10.5 0568248 E010M12X1.514 1.00 95 24 11.20 9.00 12 3 13.0 0568255 E010M14X1.014 1.25 95 24 11.20 9.00 12 3 12.8 0568262 E010M14X1.2514 1.50 95 24 11.20 9.00 12 3 12.5 0568279 E010M14X1.516 1.00 102 24 12.50 10.00 13 3 15.0 0568286 E010M16X1.016 1.50 102 24 12.50 10.00 13 3 14.5 0568293 E010M16X1.518 1.00 112 29 14.00 11.20 14 4 17.0 0568309 E010M18X1.018 1.50 112 29 14.00 11.20 14 4 16.5 0568316 E010M18X1.520 1.00 112 29 14.00 11.20 14 4 19.0 0568323 E010M20X1.020 1.50 112 29 14.00 11.20 14 4 18.5 0568330 E010M20X1.520 2.00 112 29 14.00 11.20 14 4 18.0 0568347 E010M20X2.022 1.50 118 29 16.00 12.50 16 4 20.5 0568354 E010M22X1.524 1.50 130 35 18.00 14.00 18 4 22.5 0568361 E010M24X1.524 2.00 130 35 18.00 14.00 18 4 22.0 0568378 E010M24X2.0



E011

E011

■●

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

4 0.50 53 17 4.00 3.15 6 3 3.5 14 0568385 E011M4X.55 0.50 58 11 5.00 4.00 7 3 4.5 22 0568392 E011M5X.56 0.50 66 13 6.30 5.00 8 3 5.5 26 0568408 E011M6X.56 0.75 66 13 6.30 5.00 8 3 5.3 26 0568415 E011M6X.758 0.75 72 16 8.00 6.30 9 3 7.3 29 0568422 E011M8X.758 1.00 72 16 8.00 6.30 9 3 7.0 29 0568439 E011M8X1.010 1.00 80 18 10.00 8.00 11 3 9.0 34 0568446 E011M10X1.010 1.25 80 18 10.00 8.00 11 3 8.8 34 0568453 E011M10X1.2512 1.00 89 22 9.00 7.10 10 3 11.0 0568460 E011M12X1.012 1.25 89 22 9.00 7.10 10 3 10.8 0568477 E011M12X1.2512 1.50 89 22 9.00 7.10 10 3 10.5 0568484 E011M12X1.514 1.00 95 24 11.20 9.00 12 3 13.0 0568491 E011M14X1.014 1.25 95 24 11.20 9.00 12 3 12.8 0568507 E011M14X1.2514 1.50 95 24 11.20 9.00 12 3 12.5 0568514 E011M14X1.516 1.00 102 24 12.50 10.00 13 3 15.0 0568521 E011M16X1.016 1.50 102 24 12.50 10.00 13 3 14.5 0568538 E011M16X1.518 1.00 112 29 14.00 11.20 14 4 17.0 0568545 E011M18X1.018 1.50 112 29 14.00 11.20 14 4 16.5 0568552 E011M18X1.520 1.00 112 29 14.00 11.20 14 4 19.0 0568569 E011M20X1.020 1.50 112 29 14.00 11.20 14 4 18.5 0568576 E011M20X1.520 2.00 112 29 14.00 11.20 14 4 18.0 0568583 E011M20X2.022 1.50 118 29 16.00 12.50 16 4 20.5 0568590 E011M22X1.524 1.50 130 35 18.00 14.00 18 4 22.5 0568606 E011M24X1.524 2.00 130 35 18.00 14.00 18 4 22.0 0568613 E011M24X2.0



E045 - E049

E045

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 15 3.15 2.50 5 3 2.5 12.5 0605790 E045M34 0.70 53 17 4.00 3.15 6 3 3.3 14 0605806 E045M45 0.80 58 11 5.00 4.00 7 3 4.2 22 0605813 E045M56 1.00 66 13 6.30 5.00 8 3 5 26 0605820 E045M68 1.25 72 16 8.00 6.30 9 3 6.8 29 0605837 E045M810 1.50 80 18 10.00 8.00 11 3 8.5 34 0605844 E045M1012 1.75 89 22 9.00 7.10 10 4 10.3 0605851 E045M1216 2.00 102 24 12.50 10.00 13 4 14 0605868 E045M1620 2.50 112 29 14.00 11.20 14 4 17.5 0605875 E045M20

E049

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0606155 E049M34 0.70 53 14 4.00 3.15 6 3 3.3 14 0606162 E049M45 0.80 58 11 5.00 4.00 7 3 4.2 22 0606179 E049M56 1.00 66 13 6.30 5.00 8 3 5.0 26 0606186 E049M68 1.25 72 16 8.00 6.30 9 3 6.8 29 0606193 E049M810 1.50 80 18 10.00 8.00 11 3 8.5 34 0606209 E049M1012 1.75 89 22 9.00 7.10 10 3 10.3 0606216 E049M1216 2.00 102 24 12.50 10.00 13 3 14.0 0606223 E049M1620 2.50 112 29 14.00 11.20 14 4 17.5 0606230 E049M20

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral Point for stainless steel



E046 - E055

E046

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 15 3.15 2.50 5 3 2.5 12.5 0605882 E046M34 0.70 53 17 4.00 3.15 6 3 3.3 14 0605899 E046M45 0.80 58 11 5.00 4.00 7 3 4.2 22 0605905 E046M56 1.00 66 13 6.30 5.00 8 3 5 26 0605912 E046M68 1.25 72 16 8.00 6.30 9 3 6.8 29 0605929 E046M810 1.50 80 18 10.00 8.00 11 3 8.5 34 0605936 E046M1012 1.75 89 22 9.00 7.10 10 4 10.3 0605943 E046M1216 2.00 102 24 12.50 10.00 13 4 14 0605950 E046M1620 2.50 112 29 14.00 11.20 14 4 17.5 0605967 E046M20

E055

■●

UNC TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

4 40 2.85 48 12.5 3.15 2.50 5 3 2.35 12.5 0606667 E0554-406 32 3.51 50 14 3.55 2.80 5 3 2.85 14 0606674 E0556-328 32 4.17 53 9.5 4.50 3.55 6 3 3.5 17 0606681 E0558-3210 24 4.83 58 11 5.00 4.00 7 3 3.9 20 0606698 E05510-241/4 20 6.35 66 13 6.30 5.00 8 3 5.1 26 0606704 E0551/45/16 18 7.94 72 16 8.00 6.30 9 3 6.6 29 0606711 E0555/163/8 16 9.53 80 18 10.00 8.00 11 3 8 32 0606728 E0553/81/2 13 12.70 89 22 9.00 7.10 10 4 10.8 0606735 E0551/25/8 11 15.88 102 24 12.50 10.00 13 4 13.5 0606742 E0555/83/4 10 19.05 112 29 14.00 11.20 14 4 16.5 0606759 E0553/4



E057

E057

■●

UNC TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

6 32 3.505 50 14 3.55 2.80 5 3 2.85 14 0606865 E0576-328 32 4.166 53 9.5 4.50 3.55 6 3 3.50 17 0606872 E0578-3210 24 4.826 58 11 5.00 4.00 7 3 3.90 20 0606889 E05710-241/4 20 6.350 66 13 6.30 5.00 8 3 5.10 26 0606896 E0571/45/16 18 7.938 72 16 8.00 6.30 9 3 6.60 29 0606902 E0575/163/8 16 9.525 80 18 10.00 8.00 11 3 8.00 32 0606919 E0573/81/2 13 12.700 89 22 9.00 7.10 10 3 10.80 0606926 E0571/25/8 11 15.875 102 24 12.50 10.00 13 3 13.50 0606933 E0575/83/4 10 19.050 112 29 14.00 11.20 14 4 16.50 0606940 E0573/4

E060

E060

■●

UNF TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

10 32 4.83 58 11 5.00 4.00 7 3 4.1 20 0607107 E06010-321/4 28 6.35 66 13 6.30 5.00 8 3 5.5 26 0607114 E0601/45/16 24 7.94 72 16 8.00 6.30 9 3 6.9 29 0607121 E0605/163/8 24 9.53 80 18 10.00 8.00 11 3 8.5 32 0607138 E0603/8


● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral Point for mild steel


1534(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

5 40 1.15/16 5/8 0.141 0.110 3/16 2 H1 P 10127005 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 10123575 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10123566 32 2“ 11/16 0.141 0.110 3/16 2 H1 P 10123596 32 2“ 11/16 0.141 0.110 3/16 2 H2 B 10123636 32 2“ 11/16 0.141 0.110 3/16 2 H2 P 10123606 32 2“ 11/16 0.141 0.110 3/16 2 H3 B 10123646 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10123618 32 2.1/8 3/4 0.168 0.131 1/4 2 H1 P 10123688 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 B 10123728 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 10123698 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 10123738 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 101237010 24 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 101237610 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 101237910 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 101237710 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 101238010 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101237812 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 B 101269912 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1012389

■

●

● Spiral Point Taps, Relieved Style● Features eccentric relieved threads

with full pitch diameter relief● Freer cutting tap, resulting in much

longer tool life

● Tarauds machine● Machine Tap ● Machos de máquina


1534(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

5 44 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10123586 40 2“ 11/16 0.141 0.110 3/16 2 H2 B 10123676 40 2“ 11/16 0.141 0.110 3/16 2 H2 P 10123668 36 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 101237510 32 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 101238110 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 101238510 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 101238210 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 101238610 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101238312 28 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1012388

■●

● Tarauds machine● Machine Tap ● Machos de máquina● Spiral Point Taps, Relieved Style● Features eccentric relieved threads with

full pitch diameter relief● Freer cutting tap, resulting in much

longer tool life


1634(UNC)

■●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10111025 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10111036 32 2“ 11/16 0.141 0.110 3/16 2 H2 P 10111048 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1011105

1634(UNF)

■

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1011106

● Spiral Point Taps, Relieved Style● Features eccentric relieved threads

with full pitch diameter relief● Freer cutting tap, resulting in much

longer tool life

● Relieved Style ● Relieved Style

● Tarauds machine● Machine Tap ● Machos de máquina● Spiral Point Taps, Relieved Style● Features eccentric relieved threads with


longer tool life


TN1534(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10608056 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10623618 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 106237010 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 106237812 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1062389

TN1534(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1062383

■●

■

●

● Spiral Point Taps, Relieved Style● Features eccentric relieved threads with


longer tool life

● Spiral Point Taps, Relieved Style● Features eccentric relieved threads with


longer tool life

● Relieved Style ● Relieved Style



1585(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 10102901/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 10102911/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10102921/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10102951/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10102941/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H5 P 10102961/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H5 P 10102935/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 10103045/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 10103055/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10103065/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10103095/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 B 10103085/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H5 P 10103105/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H5 P 10103073/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 10103183/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 10103193/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10103203/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H5 P 10103217/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H2 P 10103277/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10103287/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H5 P 10103291/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 10103341/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 10103351/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10103361/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 10103375/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 10103425/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H5 P 10103433/4 10 4.1/4 2“ 0.590 0.442 11/16 3 H3 P 10103443/4 10 4.1/4 2“ 0.590 0.442 11/16 3 H5 P 1010345

■●

● Tarauds machine● Machine Tap ● Machos de máquina● Spiral Point Taps, Relieved Style


1585(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 10102971/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 10102981/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 10103021/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10102991/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10103011/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H4 P 10103001/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H4 P 10103035/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 10103115/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 10103125/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H2 P 10103165/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10103135/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 B 10103155/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H4 P 10103175/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H4 P 10103143/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 10103223/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 10103233/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10103243/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H4 P 10103257/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H2 P 10103317/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10103327/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H5 P 10103331/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 10103381/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 10103391/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10103401/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 10103415/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 10127743/4 16 4.1/4 2“ 0.590 0.442 11/16 3 H3 P 1012775

■

●

● Tarauds machine● Machine Tap ● Machos de máquina● Spiral Point Taps, Relieved Style


1585A(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10502925/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10503063/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10503207/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10503281/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10503365/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 10503423/4 10 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1050344

1585A(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10502995/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10503133/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10503247/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10503321/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10503405/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 10527743/4 16 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1052775

■

●

■

●



● Spiral Point Taps, Relieved Style

● Spiral Point Taps, Relieved Style


TN1585(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10602921/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H5 P 10602931/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10602951/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H5 P 10602965/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10603065/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10603095/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H5 P 10603103/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10603203/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H5 P 10603217/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10603281/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1060336

TN1585(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10602995/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10603133/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10603247/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10603321/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1060340

●

■

●

■

● Spiral Point Taps, Relieved Style● Tarauds machine● Machine Tap ● Machos de máquina



1985(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes Chamfer

EDP #ore-Code

4 40 1.7/8 9/16 0.141 0.110 3/16 2 P 10130375 40 1.15/16 5/8 0.141 0.110 3/16 2 P 10130396 32 2“ 11/16 0.141 0.110 3/16 2 P 10130418 32 2.1/8 3/4 0.168 0.131 1/4 2 P 101304310 24 2.3/8 7/8 0.194 0.152 1/4 2 P 101304512 24 2.3/8 15/16 0.220 0.165 9/32 2 P 10130471/4 20 2.1/2 1“ 0.255 0.191 5/16 2 P 10130495/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 P 10130513/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 P 10130537/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 P 10130551/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 P 10130579/16 12 3.19/32 1.21/32 0.429 0.322 1/2 3 P 10130595/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 P 10130613/4 10 4.1/4 2“ 0.590 0.442 11/16 3 P 10130657/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 P 10130671“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 P 1013069

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 48 1.7/8 9/16 0.141 0.110 3/16 2 2B P 10130385 44 1.15/16 5/8 0.141 0.110 3/16 2 2B P 10130406 40 2“ 11/16 0.141 0.110 3/16 2 2B P 10130428 36 2.1/8 3/4 0.168 0.131 1/4 2 2B P 101304410 32 2.3/8 7/8 0.194 0.152 1/4 2 2B P 101304612 28 2.3/8 15/16 0.220 0.165 9/32 2 2B P 10130481/4 28 2.1/2 1“ 0.255 0.191 5/16 2 2B P 10130505/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 2B P 10130523/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 2B P 10130547/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 2B P 10130561/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 2B P 10130589/16 18 3.19/32 1.21/32 0.429 0.322 1/2 3 2B P 10130605/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 2B P 10130623/4 16 4.1/4 2“ 0.590 0.442 11/16 3 2B P 10130667/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 2B P 1013068

1985(UNC)

1985(UNF)

■●

■●

● Taps feature a high hook, special O.D. and P.D. relief, and increased back taper● For use in through hole applications where a free-cutting action is required

● DDX Spiral Point Taps, Relieved Style, High Hook● Tarauds machine● Machine Tap ● Machos de máquina


1785M-TN1785

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M2 0.40 1.3/4 7/16 0.141 0.110 3/16 2 D3 P 1012659M2.3 0.45 1.3/4 7/16 0.141 0.110 3/16 2 D3 P 1012661M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 2 D3 P 1012662M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 2 D3 P 1012663M3 0.50 1.15/16 5/8 0.141 0.110 3/16 2 D3 P 1012664M3.5 0.60 2“ 11/16 0.141 0.110 3/16 2 D4 P 1012666M4 0.70 2.1/8 3/4 0.168 0.131 1/4 2 D4 P 1012668M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 2 D4 P 1012669M5 0.80 2.3/8 7/8 0.194 0.152 1/4 2 D4 P 1012672M6 1.00 2.1/2 1“ 0.255 0.191 5/16 2 D5 P 1012674M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 2 D5 P 1012676M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 2 D5 P 1012678M9 1.25 2.15/16 1.1/4 0.381 0.286 7/16 3 D5 P 1012680M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D5 P 1012682M11 1.50 3.5/32 1.7/16 0.323 0.242 13/32 3 D6 P 1012685M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 P 1012686M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 3 D7 P 1012689M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 3 D7 P 1012693M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 3 D7 P 1012696

TN1785

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M4 0.70 2.1/8 3/4 0.168 0.131 1/4 2 D4 P 1062668M5 0.80 2.3/8 7/8 0.194 0.152 1/4 2 D4 P 1062672M6 1.00 2.1/2 1“ 0.255 0.191 5/16 2 D5 P 1062674M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 2 D5 P 1062678M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D5 P 1062682M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 P 1062686

■ ●

■●



1534NR(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1 64 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 10107791 64 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 10107802 56 1.3/4 7/16 0.141 0.110 3/16 2 H1 P 10107872 56 1.3/4 7/16 0.141 0.110 3/16 2 H2 B 10107902 56 1.3/4 7/16 0.141 0.110 3/16 2 H2 P 10107883 48 1.13/16 1/2 0.141 0.110 3/16 2 H2 B 10107983 48 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 10107964 40 1.7/8 9/16 0.141 0.110 3/16 2 H1 P 1010804

6 32 2“ 11/16 0.141 0.110 3/16 2 H1 P 10108186 32 2“ 11/16 0.141 0.110 3/16 2 H2 B 10108226 32 2“ 11/16 0.141 0.110 3/16 2 H2 P 10108196 32 2“ 11/16 0.141 0.110 3/16 2 H3 B 10108236 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10108208 32 2.1/8 3/4 0.168 0.131 1/4 2 H1 P 10108288 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 B 10108328 32 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 10108298 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 10108338 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 101083010 24 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 101083710 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 101084110 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 101083810 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 101084210 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101083912 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 B 101107212 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1011071

■

●

● Spiral Point Taps, Non-Relieved Style● Tarauds machine● Machine Tap ● Machos de máquina

4 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10108054 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 10108075 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10108135 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 1010815

● Recommended for older equipment or manual feed rate applications where the feed rate control is not sufficient for a relieved style tap like our 1534/1585 series


1534NR(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

0 80 1.5/8 5/16 0.141 0.110 3/16 2 H1 P 10107750 80 1.5/8 5/16 0.141 0.110 3/16 2 H2 B 10107780 80 1.5/8 5/16 0.141 0.110 3/16 2 H2 P 10107761 72 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 10107831 72 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 10107842 64 1.3/4 7/16 0.141 0.110 3/16 2 H1 P 10107912 64 1.3/4 7/16 0.141 0.110 3/16 2 H2 P 10107923 56 1.13/16 1/2 0.141 0.110 3/16 2 H1 P 10107993 56 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 10108004 48 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 10108114 48 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10108095 44 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10108176 40 2“ 11/16 0.141 0.110 3/16 2 H2 B 10108276 40 2“ 11/16 0.141 0.110 3/16 2 H2 P 10108258 36 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 101083510 32 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 101084310 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 101084710 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 101084410 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 101084810 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101084512 28 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1010853

UNS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 36 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010803

■ ●

■ ●

1534NR(UNS)




1585NR(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 10128131/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 10128141/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10128151/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10128181/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10128171/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H5 P 10128191/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H5 P 10128165/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 10128275/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 10128285/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10128295/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10128325/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10128315/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H5 P 10128335/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H5 P 10128303/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 10128413/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 10128423/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10128433/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H5 P 10128447/16 14 3.5/32 1.7/16 0.323 0.242 113/32 3 H2 P 10128497/16 14 3.5/32 1.7/16 0.323 0.242 113/32 3 H3 P 10128507/16 14 3.5/32 1.7/16 0.323 0.242 113/32 3 H5 P 10128511/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 10128551/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 10128561/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10128571/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 10128585/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 10128635/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H5 P 10128643/4 10 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 10128653/4 10 4.1/2 2“ 0.590 0.442 11/16 3 H5 P 1012866

■

●




1585NR(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 10128201/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 10128211/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 10128251/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10128221/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10128241/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H4 P 10128231/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H4 P 10128265/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 10128345/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 10128355/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H2 P 10128395/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 10128365/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10128385/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H4 P 10128405/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H4 P 10128373/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 10128453/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 10128463/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10128473/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H4 P 10128487/16 20 3.5/32 1.7/16 0.323 0.242 113/32 3 H2 P 10128527/16 20 3.5/32 1.7/16 0.323 0.242 113/32 3 H3 P 10128537/16 20 3.5/32 1.7/16 0.323 0.242 113/32 3 H5 P 10128541/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 10128591/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 10128601/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10128611/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 10128625/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 10128673/4 16 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1012868

■

●




1593(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

6 32 2“ 11/16 0.141 0.110 3/16 2 H7 P 10108778 32 2.1/8 3/4 0.168 0.131 1/4 2 H7 P 101087910 24 2.3/8 7/8 0.194 0.152 1/4 2 H7 P 1010881

1593(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 2.3/8 7/8 0.194 0.152 1/4 2 H7 P 1010883

● .003”/.0035” Oversize● Used primarily where a part will be plated or treated after tapping

■●

■

●


● .003”/.0035” Oversize● Used primarily where a part will be plated or treated after tapping



1585OV(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H11 P 10117545/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H11 P 10117553/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H11 P 10117567/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H11 P 10117571/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H11 P 10117585/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H11 P 1011759

■

●

1585OV(UNC)


● .005” Oversize● Used primarily where a part will be plated or treated after tapping


1785NR

MPmm

l1

Inch

l2

Inch

l3

Inch

d2ØInch

aInch

#Flutes Limits

EDP #ore-Code

1.6 0.35 1.5/8 5/16 3/16 0.1410 0.1100 2 D3 10128902 0.40 1.3/4 7/16 3/16 0.1410 0.1100 2 D3 10128912.3 0.40 1.3/4 7/16 3/16 0.1410 0.1100 2 D3 10128922.5 0.45 1.13/16 1/2 3/16 0.1410 0.1100 2 D3 10128932.6 0.45 1.13/16 1/2 3/16 0.1410 0.1100 2 D3 10128943 0.50 1.15/16 5/8 3/16 0.1410 0.1100 2 D3 10128963.5 0.60 2“ 11/16 3/16 0.1410 0.1100 2 D4 10128974 0.70 2.1/8 3/4 1/4 0.1380 0.1310 2 D4 10128984.5 0.75 2.3/8 7/8 1/4 0.1940 0.1520 2 D4 10128995 0.80 2.3/8 7/8 1/4 0.1940 0.1520 2 D4 10129006 1.00 2.1/2 1“ 5/16 0.2550 0.1910 2 D5 10129017 1.00 2.23/32 1.1/8 3/8 0.3180 0.2380 2 D5 10129028 1.25 2.23/32 1.1/8 3/8 0.3180 0.2380 2 D5 101290310 1.50 2.15/16 1.1/4 7/16 0.3810 0.2860 3 D6 101290412 1.75 3.3/8 1.21/32 7/16 0.3670 0.2750 3 D6 101290514 2.00 3.19/32 1.21/32 1/2 0.4290 0.3220 3 D7 101290616 2.00 3.13/16 1.13/16 9/16 0.4800 0.3600 3 D7 101290718 2.50 4.1/32 1.13/16 5/8 0.5420 0.4060 3 D7 101290820 2.50 4.15/32 2“ 11/16 0.6520 0.4890 3 D7 1012909

■

●

1785NR● Recommended for applications requiring

close gauging fits and in older equipment that is not sufficiently rigid to accomodate the 1534/1585 series



1534NE(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 40 4“ 9/16 0.141 0.110 3/16 2 H2 P 10200026 32 4“ 11/16 0.141 0.110 3/16 2 H3 P 10200046 32 6“ 11/16 0.141 0.110 3/16 2 H3 P 10200068 32 4“ 3/4 0.168 0.131 1/4 2 H3 P 10200088 32 6“ 3/4 0.168 0.131 1/4 2 H3 P 102001010 24 4“ 7/8 0.194 0.152 1/4 2 H3 P 102001210 24 6“ 7/8 0.194 0.152 1/4 2 H3 P 10200141/4 20 4“ 1“ 0.255 0.191 5/16 2 H3 P 10200201/4 20 6“ 1“ 0.255 0.191 5/16 2 H3 P 10200225/16 18 4“ 1.1/8 0.318 0.238 3/8 2 H3 P 10200285/16 18 6“ 1.1/8 0.318 0.238 3/8 2 H3 P 10200303/8 16 4“ 1.1/4 0.381 0.286 7/16 3 H3 P 10200363/8 16 6“ 1.1/4 0.381 0.286 7/16 3 H3 P 10200387/16 14 6“ 1.7/16 0.323 0.242 13/32 3 H3 P 10200441/2 13 6“ 1.21/32 0.367 0.275 7/16 3 H3 P 1020048

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 4“ 7/8 0.194 0.152 1/4 2 H3 P 102001610 32 6“ 7/8 0.194 0.152 1/4 2 H3 P 10200181/4 28 4“ 1“ 0.255 0.191 5/16 2 H3 P 10200241/4 28 6“ 1“ 0.255 0.191 5/16 2 H3 P 10200265/16 24 4“ 1.1/8 0.318 0.238 3/8 2 H3 P 10200325/16 24 6“ 1.1/8 0.318 0.238 3/8 2 H3 P 10200343/8 24 4“ 1.1/4 0.381 0.286 7/16 3 H3 P 10200403/8 24 6“ 1.1/4 0.381 0.286 7/16 3 H3 P 10200427/16 20 6“ 1.7/16 0.323 0.242 13/32 3 H3 P 10200461/2 20 6“ 1.21/32 0.367 0.275 7/16 3 H3 P 1020050

■

●

■

●

● Recommended for applications requiring close gauging fits and in older equipment that is not sufficiently rigid to accomodate the 1534/1585 series

● Spiral Point Taps, Extension Style, Non-Relieved Style


1534NE(UNF)


1578(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes Limits

EDP #ore-Code

4 40 2“ 11/16 0.141 0.110 3/16 2 H2 10104916 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 10104946 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 10104958 32 2.3/8 15/16 0.220 0.165 9/32 2 H2 10104988 32 2.3/8 15/16 0.220 0.165 9/32 2 H3 10104991/4 20 2.23/32 1.1/8 0.318 0.238 5/16 2 H2 10105061/4 20 2.23/32 1.1/8 0.318 0.238 5/16 2 H3 1010507

1578(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes Limits

EDP #ore-Code

10 32 2.1/2 1“ 0.255 0.191 9/32 2 H2 10105021/4 28 2.23/32 1.1/8 0.318 0.238 5/16 2 H2 10105081/4 28 2.23/32 1.1/8 0.318 0.238 5/16 2 H3 1010509

■

●

■●

● STI taps are oversize so that the thread they produce will accept a helical coil wire screw thread insert of the same nominal size and pitch

● Spiral Point Tap, Screw Thread Insert● Tarauds machine● Machine Tap ● Machos de máquina


E027

E027

■●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

6 32 2“ 0.2610 0.1410 0.1100 3 H2 N36 2.85 0.5938 0581506 E0276-328 32 2.1/8 0.2484 0.1680 0.1310 3 H2 N29 3.50 0.6526 0581513 E0278-3210 24 2.3/8 0.2650 0.1940 0.1520 3 H3 N25 3.90 0.8434 0581520 E02710-2412 24 2.3/8 0.2520 0.2200 0.1650 3 H3 N16 4.50 0.8848 0581537 E02712-241/4 20 2.1/2 0.3937 0.2550 0.1910 3 H3 N7 5.10 1.0993 0581544 E0271/45/16 18 2.23/32 0.4567 0.3180 0.2380 3 H3 F 6.60 1.3094 0581551 E0275/163/8 16 2.15/16 0.5315 0.3810 0.2860 3 H3 5/16 8.00 1.4415 0581568 E0273/87/16 14 3.5/32 0.6299 0.3230 0.2420 3 H3 U 9.40 0581575 E0277/161/2 13 3.3/8 0.6890 0.3670 0.2750 3 H3 27/64 10.80 0581582 E0271/29/16 12 3.19/32 0.7087 0.4290 0.3220 3 H3 31/64 12.20 0581599 E0279/16 1)

5/8 11 3.13/16 0.7087 0.4800 0.3600 3 H3 17/32 13.50 0581605 E0275/83/4 10 4.1/4 0.8858 0.5900 0.4420 3 H4 21/32 16.50 0581612 E0273/47/8 9 4.11/16 0.9843 0.6970 0.5230 3 H4 49/64 19.50 0581629 E0277/81“ 8 5.1/8 1.1811 0.8000 0.6000 3 H4 7/8 22.25 0581636 E0271


● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral Flute


E028

E028

■●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

4 40 1.7/8 0.6091 0.1410 0.1100 3 H2 N43 2.35 0.6091 0581643 E0284-405 40 1.15/16 0.7404 0.1410 0.1100 3 H2 N38 2.65 0.7404 0581650 E0285-406 32 2“ 0.2610 0.1410 0.1100 3 H2 N36 2.85 0.5938 0581667 E0286-328 32 2.1/8 0.2484 0.1680 0.1310 3 H2 N29 3.50 0.6526 0581674 E0288-3210 24 2.3/8 0.2650 0.1940 0.1520 3 H3 N25 3.90 0.8434 0581681 E02810-2412 24 2.3/8 0.2520 0.2200 0.1650 3 H3 N16 4.50 0.8848 0581698 E02812-241/4 20 2.1/2 0.3937 0.2550 0.1910 3 H3 N7 5.10 1.0993 0581704 E0281/45/16 18 2.23/32 0.4567 0.3180 0.2380 3 H3 F 6.60 1.3094 0581711 E0285/163/8 16 2.15/16 0.5315 0.3810 0.2860 3 H3 5/16 8.00 1.4415 0581728 E0283/83/8 16 2.15/16 0.5315 0.3810 0.2860 3 H5 5/16 8.00 1.4415 0581735 E0283/8H5 1)

7/16 14 3.5/32 0.6299 0.3230 0.2420 3 H3 U 9.40 0581742 E0287/161/2 13 3.3/8 0.6890 0.3670 0.2750 3 H3 27/64 10.80 0581759 E0281/29/16 12 3.19/32 0.7087 0.4290 0.3220 3 H3 31/64 12.20 0581766 E0289/165/8 11 3.13/16 0.7087 0.4800 0.3600 3 H3 17/32 13.50 0581773 E0285/83/4 10 4.1/4 0.8858 0.5900 0.4420 3 H4 21/32 16.50 0581780 E0283/47/8 9 4.11/16 0.9843 0.6970 0.5230 3 H4 49/64 19.50 0581797 E0287/81“ 8 5.1/8 1.1811 0.8000 0.6000 3 H4 7/8 22.25 0581803 E0281

1) Class of fit: 2B



E037

E037

■

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

10 32 2.3/8 0.2650 0.1940 0.1520 3 H2 N21 4.10 0.8434 0582312 E03710-321/4 28 2.1/2 0.3937 0.2550 0.1910 3 H3 N3 5.50 1.0993 0582329 E0371/45/16 24 2.23/32 0.4567 0.3180 0.2380 3 H3 I 6.90 1.3094 0582336 E0375/163/8 24 2.15/16 0.5315 0.3810 0.2860 3 H3 Q 8.50 1.4415 0582343 E0373/87/16 20 3.5/32 0.6299 0.3230 0.2420 3 H3 25/64 9.90 0582350 E0377/161/2 20 3.3/8 0.6890 0.3670 0.2750 3 H3 29/64 11.50 0582367 E0371/29/16 18 3.19/32 0.7087 0.4290 0.3220 3 H3 33/64 12.90 0582374 E0379/165/8 18 3.13/16 0.7087 0.4800 0.3600 3 H3 37/64 14.50 0582381 E0375/83/4 16 4.1/4 0.8858 0.5900 0.4420 3 H3 11/16 17.50 0582398 E0373/47/8 14 4.11/16 0.9843 0.6970 0.5230 3 H4 13/16 20.40 0582404 E0377/81“ 12 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.25 0582411 E0371-12 1)

1“ 14 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.50 0582428 E0371-14




E038

E038

■

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

10 32 2.3/8 0.2650 0.1940 0.1520 3 H2 N21 4.10 0.8434 0582435 E03810-321/4 28 2.1/2 0.3937 0.2550 0.1910 3 H3 N3 5.50 1.0993 0582442 E0381/45/16 24 2.23/32 0.4567 0.3180 0.2380 3 H3 I 6.90 1.3094 0582459 E0385/163/8 24 2.15/16 0.5315 0.3810 0.2860 3 H3 Q 8.50 1.4415 0582466 E0383/87/16 20 3.5/32 0.6299 0.3230 0.2420 3 H3 25/64 9.90 0582473 E0387/161/2 20 3.3/8 0.6890 0.3670 0.2750 3 H3 29/64 11.50 0582480 E0381/29/16 18 3.19/32 0.7087 0.4290 0.3220 3 H3 33/64 12.90 0582497 E0389/16 1)

5/8 18 3.13/16 0.7087 0.4800 0.3600 3 H3 37/64 14.50 0582503 E0385/83/4 16 4.1/4 0.8858 0.5900 0.4420 3 H3 11/16 17.50 0582510 E0383/47/8 14 4.11/16 0.9843 0.6970 0.5230 3 H4 13/16 20.40 0582527 E0387/81“ 12 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.25 0582534 E0381-12 1)

1“ 14 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.50 0582541 E0381-14




E069

E069

■●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

4 40 1.7/8 0.6091 0.1410 0.1100 3 H2 N43 2.35 0.6091 0582718 E0694-405 40 1.15/16 0.7404 0.1410 0.1100 3 H2 N38 2.65 0.7404 0582725 E0695-406 32 2“ 0.2610 0.1410 0.1100 3 H2 N36 2.85 0.5938 0582732 E0696-328 32 2.1/8 0.2484 0.1680 0.1310 3 H2 N29 3.50 0.6526 0582749 E0698-3210 24 2.3/8 0.2650 0.1940 0.1520 3 H3 N25 3.90 0.8434 0582756 E06910-2412 24 2.3/8 0.2520 0.2200 0.1650 3 H3 N16 4.50 0.8848 0582763 E06912-241/4 20 2.1/2 0.3937 0.2550 0.1910 3 H3 7 5.10 1.0993 0582770 E0691/45/16 18 2.23/32 0.4567 0.3180 0.2380 3 H3 F 6.60 1.3094 0582787 E0695/163/8 16 2.15/16 0.5315 0.3810 0.2860 3 H3 5/16 8.00 1.4415 0582794 E0693/87/16 14 3.5/32 0.6299 0.3230 0.2420 3 H3 U 9.40 0582800 E0697/161/2 13 3.3/8 0.6890 0.3670 0.2750 3 H3 27/64 10.80 0582817 E0691/29/16 12 3.19/32 0.7087 0.4290 0.3220 3 H3 31/64 12.20 0582824 E0699/165/8 11 3.13/16 0.7087 0.4800 0.3600 4 H3 17/32 13.50 0582831 E0695/83/4 10 4.1/4 0.8858 0.5900 0.4420 4 H4 21/32 16.50 0582848 E0693/47/8 9 4.11/16 0.9843 0.6970 0.5230 4 H4 49/64 19.50 0582855 E0697/81“ 8 5.1/8 1.1811 0.8000 0.6000 4 H4 7/8 22.25 0582862 E0691

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral Flute for stainless steel


E079

E079

■●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes Limits

l4

Inch Stock #

EDP #ore-Code

10 32 2.3/8 0.2650 0.1940 0.1520 3 H2 N21 4.10 0.8434 0582916 E07910-321/4 28 2.1/2 0.3937 0.2550 0.1910 3 H3 N3 5.50 1.0993 0582923 E0791/45/16 24 2.23/32 0.4567 0.3180 0.2380 3 H3 I 6.90 1.3094 0582930 E0795/163/8 24 2.15/16 0.5315 0.3810 0.2860 3 H3 Q 8.50 1.4415 0582947 E0793/87/16 20 3.5/32 0.6299 0.3230 0.2420 3 H3 25/64 9.90 0582954 E0797/161/2 20 3.3/8 0.6890 0.3670 0.2750 3 H3 29/64 11.50 0582961 E0791/29/16 18 3.19/32 0.7087 0.4290 0.3220 3 H3 33/64 12.90 0582978 E0799/165/8 18 3.13/16 0.7087 0.4800 0.3600 4 H3 37/64 14.50 0582985 E0795/83/4 16 4.1/4 0.8858 0.5900 0.4420 4 H3 11/16 17.50 0582992 E0793/47/8 14 4.11/16 0.9843 0.6970 0.5230 4 H4 13/16 20.40 0583005 E0797/81“ 12 5.1/8 1.1811 0.8000 0.6000 4 H4 59/64 23.25 0583012 E0791-121“ 14 5.1/8 1.1811 0.8000 0.6000 4 H4 59/64 23.50 0583029 E0791-14



E007 - E008

E007

■●

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

4 0.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0580608 E007M45 0.80 2.3/8 0.2650 0.1940 0.1520 3 4.2 0.8434 N19 0580615 E007M56 1.00 2.1/2 0.3937 0.2550 0.1910 3 5 1.0993 N9 0580622 E007M68 1.25 2.23/32 0.4567 0.3180 0.2380 3 6.8 1.3094 H 0580639 E007M810 1.50 2.15/16 0.5315 0.3810 0.2860 3 8.5 1.4415 Q 0580646 E007M1012 1.75 3.3/8 0.6890 0.3670 0.2750 3 10.3 Y 0580653 E007M1214 2.00 3.19/32 0.7087 0.4290 0.3220 3 12 15/32 0580660 E007M14 1)

16 2.00 3.13/16 0.7087 0.4800 0.3600 3 14 35/64 0580677 E007M1618 2.50 4.1/32 0.8858 0.5420 0.4060 3 15.5 39/64 0580684 E007M18 1)

20 2.50 4.15/32 0.8858 0.6520 0.4890 3 17.5 11/16 0580691 E007M20 1)

E008

■●

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Stock #

EDP #ore-Code

4 0.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0580707 E008M45 0.80 2.3/8 0.2650 0.1940 0.1520 3 4.2 0.8434 N19 0580714 E008M56 1.00 2.1/2 0.3937 0.2550 0.1910 3 5 1.0993 N9 0580721 E008M68 1.25 2.23/32 0.4567 0.3180 0.2380 3 6.8 1.3094 H 0580738 E008M810 1.50 2.15/16 0.5315 0.3810 0.2860 3 8.5 1.4415 Q 0580745 E008M1012 1.75 3.3/8 0.6890 0.3670 0.2750 3 10.3 Y 0580752 E008M1214 2.00 3.19/32 0.7087 0.4290 0.3220 3 12 15/32 0580769 E008M14 1)

16 2.00 3.13/16 0.7087 0.4800 0.3600 3 14 35/64 0580776 E008M1618 2.50 4.1/32 0.8858 0.5420 0.4060 3 15.5 39/64 0580783 E008M18 1)

20 2.50 4.15/32 0.8858 0.6520 0.4890 3 17.5 11/16 0580790 E008M20




E017

E017

■●

MFPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

8 1.00 2.23/32 0.4567 0.3180 0.2380 3 7.0 1.3094 J 0580998 E017M8X1.0 1)

10 1.00 2.15/16 0.5315 0.3810 0.2860 3 9.0 1.4415 T 0581001 E017M10X1.0 1)

14 1.50 3.19/32 0.7087 0.4290 0.3220 3 12.5 31/64 0581018 E017M14X1.5 1)

18 1.50 4.1/32 0.8858 0.5420 0.4060 3 16.5 41/64 0581025 E017M18X1.5 1)

E018

E018

■●

MFPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Stock #

EDP #ore-Code

8 1.00 2.23/32 0.4567 0.3180 0.2380 3 7.0 1.3094 J 0581032 E018M8X1.0 1)

10 1.00 2.15/16 0.5315 0.3810 0.2860 3 9.0 1.4415 T 0581049 E018M10X1.0 1)

14 1.50 3.19/32 0.7087 0.4290 0.3220 3 12.5 31/64 0581056 E018M14X1.5 1)

18 1.50 4.1/32 0.8858 0.5420 0.4060 3 16.5 41/64 0581063 E018M18X1.5 1)





E085

E085

■

●

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

4 0.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0583036 E085M45 0.80 2.3/8 0.2650 0.1940 0.1520 3 4.2 0.8434 N19 0583043 E085M56 1.00 2.1/2 0.3937 0.2550 0.1910 3 5 1.0993 N9 0583050 E085M68 1.25 2.23/32 0.4567 0.3180 0.2380 3 6.8 1.3094 H 0583067 E085M810 1.50 2.15/16 0.5315 0.3810 0.2860 3 8.5 1.4415 Q 0583074 E085M1012 1.75 3.3/8 0.6890 0.3670 0.2750 3 10.3 Y 0583081 E085M1214 2.00 3.19/32 0.7087 0.4290 0.3220 3 12 15/32 0583098 E085M1416 2.00 3.13/16 0.7087 0.4800 0.3600 4 14 35/64 0583104 E085M1620 2.50 4.15/32 0.8858 0.6520 0.4890 4 17.5 11/16 0583111 E085M20



E002

E002

■

●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code




E003

E003

■

●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code




E012

E012

■

●

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

4 0.50 53 7 4.0 3.15 6 3 3.5 19 0568620 E012M4X.55 0.50 58 8 5.0 4.0 7 3 4.5 22 0568637 E012M5X.56 0.50 66 10 6.3 5.0 8 3 5.5 27 0568644 E012M6X.56 0.75 66 10 6.3 5.0 8 3 5.3 27 0568651 E012M6X.758 0.75 72 12 8.0 6.3 9 3 7.3 31 0568668 E012M8X.758 1.00 72 12 8.0 6.3 9 3 7.0 31 0568675 E012M8X1.010 1.00 80 15 10.0 8.0 11 3 9.0 35 0568682 E012M10X1.010 1.25 80 15 10.0 8.0 11 3 8.8 35 0568699 E012M10X1.2512 1.00 89 16 9.0 7.1 10 3 11.0 0568705 E012M12X1.012 1.25 89 16 9.0 7.1 10 3 10.8 0568712 E012M12X1.2512 1.50 89 16 9.0 7.1 10 3 10.5 0568729 E012M12X1.514 1.50 95 18 11.2 9.0 12 3 12.5 0568736 E012M14X1.516 1.00 102 18 12.5 10.0 13 4 15.0 0568743 E012M16X1.016 1.50 102 18 12.5 10.0 13 4 14.5 0568750 E012M16X1.518 1.50 112 29 14.0 11.2 14 4 16.5 0568767 E012M18X1.520 1.50 112 29 14.0 11.2 14 4 18.5 0568774 E012M20X1.522 1.50 118 29 16.0 12.5 16 4 20.5 0568781 E012M22X1.5



E013

E013

■●

MFPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

4 0.50 53 7 4.0 3.15 6 3 3.5 19 0568798 E013M4X.55 0.50 58 8 5.0 4.0 7 3 4.5 22 0568804 E013M5X.56 0.50 66 10 6.3 5.0 8 3 5.5 27 0568811 E013M6X.56 0.75 66 10 6.3 5.0 8 3 5.3 27 0568828 E013M6X.758 0.75 72 12 8.0 6.3 9 3 7.3 31 0568835 E013M8X.758 1.00 72 12 8.0 6.3 9 3 7.0 31 0568842 E013M8X1.010 1.00 80 15 10.0 8.0 11 3 9.0 35 0568859 E013M10X1.010 1.25 80 15 10.0 8.0 11 3 8.8 35 0568866 E013M10X1.2512 1.00 89 16 9.0 7.1 10 3 11.0 0568873 E013M12X1.012 1.25 89 16 9.0 7.1 10 3 10.8 0568880 E013M12X1.2512 1.50 89 16 9.0 7.1 10 3 10.5 0568897 E013M12X1.514 1.50 95 18 11.2 9.0 12 3 12.5 0568903 E013M14X1.516 1.00 102 18 12.5 10.0 13 4 15.0 0568910 E013M16X1.016 1.50 102 18 12.5 10.0 13 4 14.5 0568927 E013M16X1.518 1.50 112 29 14.0 11.2 14 4 16.5 0568934 E013M18X1.520 1.50 112 29 14.0 11.2 14 4 18.5 0568941 E013M20X1.522 1.50 118 29 16.0 12.5 16 4 20.5 0568958 E013M22X1.5



E050

E050

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 6 3.15 2.50 5 3 2.5 12.5 0606247 E050M34 0.70 53 7 4.00 3.15 6 3 3.3 19 0606254 E050M45 0.80 58 8 5.00 4.00 7 3 4.2 22 0606261 E050M56 1.00 66 10 6.30 5.00 8 3 5.0 27 0606278 E050M68 1.25 72 12 8.00 6.30 9 3 6.8 31 0606285 E050M810 1.50 80 15 10.00 8.00 11 3 8.5 35 0606292 E050M1012 1.75 89 16 9.00 7.10 10 3 10.3 0606308 E050M1216 2.00 102 18 12.50 10.00 13 4 14.0 0606315 E050M1620 2.50 112 29 14.00 11.20 14 4 17.5 0606322 E050M20

E051

E051

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

6 1.00 66 10 6.30 5.00 8 3 5 27 0606339 E051M68 1.25 72 12 8.00 6.30 9 3 6.8 31 0606346 E051M810 1.50 80 15 10.0 8.00 11 3 8.5 35 0606353 E051M1012 1.75 89 16 9.00 7.10 10 3 10.3 0606360 E051M1216 2.00 102 18 12.50 10.00 13 4 14 0606377 E051M1620 2.50 112 29 14.00 11.20 14 4 17.5 0606384 E051M20

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral Flute for mild steel

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral flute, axial coolant for mild steel


E048

E048

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

Stock #

EDP #ore-Code

3 0.50 48 6 3.15 2.5 5 3 2.5 15 0606063 E048M34 0.70 53 7 4.0 3.15 6 3 3.3 19 0606070 E048M45 0.80 58 8 5.0 4.0 7 3 4.2 22 0606087 E048M56 1.00 66 10 6.3 5.0 8 3 5 27 0606094 E048M68 1.25 72 12 8.0 6.3 9 3 6.8 31 0606100 E048M810 1.50 80 15 10.0 8.0 11 3 8.5 35 0606117 E048M1012 1.75 89 16 9.0 7.1 10 3 10.3 0606124 E048M1216 2.00 102 18 12.50 10.0 13 4 14 0606131 E048M1620 2.50 112 22 14 11.2 14 4 17.5 0606148 E048M20

E044

E044

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

8 1.25 72 17 8.00 6.30 8 3 6.8 32 0605745 E044M810 1.50 80 20 10.00 8.00 9 3 8.5 36 0605752 E044M1012 1.75 89 22 9.00 7.10 10 3 10.3 0605769 E044M1216 2.00 102 24 12.50 10.00 13 4 14 0605776 E044M1620 2.50 112 29 14.00 11.20 14 4 17.5 0605783 E044M20

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral flute, for stainless steel

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral flute, axial coolant for alloy steel


E052 - E058

E052

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

3 0.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0606391 E052M34 0.70 53 14 4.00 3.15 6 3 3.3 14 0606407 E052M45 0.80 58 11 5.00 4.00 7 3 4.2 22 0606414 E052M56 1.00 66 13 6.30 5.00 8 3 5 26 0606421 E052M68 1.25 72 16 8.00 6.30 9 3 6.8 29 0606438 E052M810 1.50 80 18 10.00 8.00 11 3 8.5 34 0606445 E052M1012 1.75 89 22 9.00 7.10 10 3 10.3 0606452 E052M1216 2.00 102 24 12.50 10.00 13 4 14 0606469 E052M16

E058

■●

UNC TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes

l4

mm Stock #

EDP #ore-Code

6 32 3.505 50 14 3.55 2.80 5 3 2.85 14 0606957 E0586-328 32 4.166 53 9.5 4.50 3.55 6 3 3.50 17 0606964 E0588-3210 24 4.826 58 11 5.00 4.00 7 3 3.90 20 0606971 E05810-241/4 20 6.350 66 13 6.30 5.00 8 3 5.10 28 0606988 E0581/45/16 18 7.938 72 16 8.00 6.30 9 3 6.60 31 0606995 E0585/163/8 16 9.525 80 18 10.00 8.00 11 3 8.00 34 0607008 E0583/81/2 13 12.700 89 22 9.00 7.10 10 3 10.80 0607015 E0581/25/8 11 15.875 102 24 12.50 10.00 13 4 13.50 0607022 E0585/83/4 10 19.050 112 29 14.00 11.20 14 4 16.50 0607039 E0583/4

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral flute, for aluminum

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina● Spiral flute, for mild steel


1582(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

4 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10109054 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 10109065 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10109075 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 10109086 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10109096 32 2“ 11/16 0.141 0.110 3/16 2 H3 B 10109108 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 10109138 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 101091410 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101091510 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010916

1582(UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 101091710 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010918

●

●

● Tarauds machine● Machine Tap ● Machos de máquina● Spiral flute



1586(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10103461/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10103471/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10103481/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10103495/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10103545/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10103553/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10103583/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 10103597/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10103627/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 10103631/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10103661/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010367

1586(UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 10103501/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 10103511/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10103521/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10103535/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10103565/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10103573/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10103603/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 10103611/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10103681/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010369

●

●




1587(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

3 48 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 10108853 48 1.13/16 1/2 0.141 0.110 3/16 2 H2 B 10108864 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 10108874 40 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 10108885 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 10108895 40 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 10108906 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10108916 32 2“ 11/16 0.141 0.110 3/16 2 H3 B 10108928 32 2.1/8 3/4 0.168 0.131 1/4 3 H3 P 10108958 32 2.1/8 3/4 0.168 0.131 1/4 3 H3 B 101089610 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 101089710 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 101089812 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 101090112 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010902

1587(UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 101089910 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010900

■●

■

●

● Tarauds machine● Machine Tap ● Machos de máquina● High-spiral helicut ● The higher helix angle gives improved chip removal



1588(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1.000 0.255 0.191 5/16 3 H3 P 10103981/4 20 2.1/2 1.000 0.255 0.191 5/16 3 H3 B 10103995/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10104025/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10104033/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10104063/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 10104077/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10104107/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 10104111/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10104141/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010415

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1.000 0.255 0.191 5/16 3 H3 P 10104001/4 28 2.1/2 1.000 0.255 0.191 5/16 3 H3 B 10104015/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10104045/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10104053/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 10104083/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 10104097/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10104127/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 10104131/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10104161/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010417

■●

■ ●


1588(UNF)

1588(UNF)● Tarauds machine● Machine Tap ● Machos de máquina

● High-spiral helicut ● The higher helix angle gives improved chip removal


1788(M)

1788(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

M3 0.50 1.15/16 5/8 0.141 0.110 3/16 2 D3 P 1012920M3 0.50 1.15/16 5/8 0.141 0.110 3/16 2 D3 B 1012940M3.5 0.60 2“ 11/16 0.141 0.110 3/16 2 D4 P 1012922M3.5 0.60 2“ 11/16 0.141 0.110 3/16 2 D4 B 1012942M4 0.70 2.1/8 3/4 0.168 0.131 1/4 3 D4 P 1012923M4 0.70 2.1/8 3/4 0.168 0.131 1/4 3 D4 B 1012943M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 3 D4 P 1012924M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 3 D4 B 1012944M5 0.80 2.3/8 7/8 0.194 0.152 1/4 3 D4 P 1012925M5 0.80 2.3/8 7/8 0.194 0.152 1/4 3 D4 B 1012945M6 1.00 2.1/2 1“ 0.255 0.191 5/16 3 D5 P 1012926M6 1.00 2.1/2 1“ 0.255 0.191 5/16 3 D5 B 1012946M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 3 D5 P 1012928M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 3 D5 B 1012948M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D6 P 1012930M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D6 B 1012950M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 P 1012932M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 B 1012952

■●



1590(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

6 32 2“ 11/16 0.141 0.110 3/16 2 H3 P 10109376 32 2“ 11/16 0.141 0.110 3/16 2 H3 B 10109388 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 10109418 32 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 101094210 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 101094510 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 101094612 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 101094912 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010950

1590(UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

6 40 2“ 11/16 0.141 0.110 3/16 2 H3 P 10109396 40 2“ 11/16 0.141 0.110 3/16 2 H3 B 10109408 36 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 10109438 36 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 101094410 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 101094710 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 101094812 28 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 101095112 28 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010952

■

●

■

●

● Machine Tap● Spiral flute, heavy-duty● Recommended for use in ferrous

materials and higher strength alloys where regular or fast spiral designs perform marginally

● A slower helix angle, large core diameter, and wider throat dimensions than the regular 1587/1588 series

● Tarauds machine ● Machos de máquina






1591(UNC) - (UNF)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10109531/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10109545/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10109575/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10109583/8 16 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 P 10109613/8 16 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 B 10109627/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10109657/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 10109661/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10109691/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010970

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3


EDP #ore-Code

1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 10109551/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 10109565/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 10109595/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 10109603/8 24 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 P 10109633/8 24 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 B 10109647/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 10109677/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 10109681/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 10109711/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010972

■●

■●

1591(UNF)






E029

E029

■

●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

2 56 1.3/4 0.3140 0.1410 0.1100 3 N47 2.0 0.3140 0583210 E0292-564 40 1.7/8 0.6091 0.1410 0.1100 3 N39 2.6 0.6091 0581810 E0294-406 32 2“ 0.2610 0.1410 0.1100 3 1/8 3.2 0.5938 0581827 E0296-328 32 2.1/8 0.2484 0.1680 0.1310 3 N25 3.8 0.6526 0581834 E0298-3210 24 2.3/8 0.4303 0.1940 0.1520 4 11/64 4.4 0.8434 0581841 E02910-2412 24 2.3/8 0.4173 0.2200 0.1650 4 N9 5.0 0.8848 0581858 E02912-241/4 20 2.1/2 0.5075 0.2550 0.1910 4 5.8 1.0073 0581865 E0291/45/16 18 2.23/32 0.5939 0.3180 0.2380 5 7.3 1.1891 0581872 E0295/163/8 16 2.15/16 0.6020 0.3810 0.2860 6 11/32 8.8 1.2915 0581889 E0293/87/16 14 3.5/32 0.9055 0.3230 0.2420 6 Y 10.3 0581896 E0297/161/2 13 3.3/8 0.9055 0.3670 0.2750 6 15/32 11.9 0581902 E0291/25/8 11 3.13/16 0.9843 0.4800 0.3600 8 37/64 14.8 0581919 E0295/83/4 10 4-1/4 1.1614 0.5900 0.4420 8 45/64 17.9 0581926 E0293/47/8 9 4.11/16 1.1614 0.6970 0.5230 8 53/64 21.0 0581933 E0297/81“ 8 5-1/8 1.3976 0.8000 0.6000 8 61/64 24.0 0581940 E0291 1)


● Thread Forming Taps MTT-X ● MTT-X Tarauds machine ● MTT-X Machos de máquina


E064

E064

●

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

4 40 1.7/8 0.6091 0.1410 0.1100 3 N39 2.6 0.6091 0582633 E0644-406 32 2“ 0.2610 0.1410 0.1100 3 1/8 3.2 0.5938 0582640 E0646-328 32 2.1/8 0.2484 0.1680 0.1310 3 N25 3.8 0.6526 0582657 E0648-3210 24 2.3/8 0.4303 0.1940 0.1520 4 11/64 4.4 0.8434 0582664 E06410-2412 24 2.3/8 0.4173 0.2200 0.1650 4 N9 5.0 0.8848 0582671 E06412-241/4 20 2.1/2 0.5075 0.2550 0.1910 4 5.8 1.0073 0582688 E0641/45/16 18 2.23/32 0.5939 0.3180 0.2380 5 7.3 1.1891 0582695 E0645/163/8 16 2.15/16 0.6020 0.3810 0.2860 6 11/32 8.8 1.2915 0582701 E0643/8

E039

E039

■

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

0 80 1.5/8 0.3125 0.1410 0.1100 3 N54 1.4 0.3125 0583234 E0390-8010 32 2.3/8 0.4303 0.2200 0.1650 4 N16 4.5 0.8434 0582558 E03910-321/4 28 2.1/2 0.5075 0.2550 0.1910 4 A 6.0 1.0073 0582565 E0391/45/16 24 2.23/32 0.5939 0.3180 0.2380 5 M 7.5 1.1891 0582572 E0395/163/8 24 2.15/16 0.6020 0.3810 0.2860 6 T 9.1 1.2915 0582589 E0393/8 1)

7/16 20 3.5/32 0.9055 0.3230 0.2420 6 Z 10.6 0582596 E0397/161/2 20 3.3/8 0.9055 0.3670 0.2750 6 0.4760 12.1 0582602 E0391/25/8 18 3.13/16 0.9843 0.4800 0.3600 8 39/64 15.3 0582619 E0395/8 1)

3/4 16 4.1/4 1.1614 0.5900 0.4420 8 23/32 18.3 0582626 E0393/4 1)

● MTT-X Tarauds machine● Thread Forming Taps MTT-X ● MTT-X Machos de máquina




E074

E074

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

10 32 2.3/8 0.4303 0.2200 0.1650 4 N16 4.5 0.8434 0582879 E07410-321/4 28 2.1/2 0.5075 0.2550 0.1910 4 A 6.0 1.0073 0582886 E0741/45/16 24 2.23/32 0.5939 0.3180 0.2380 5 M 7.5 1.1891 0582893 E0745/163/8 24 2.15/16 0.6020 0.3810 0.2860 6 T 9.1 1.2915 0582909 E0743/8

E009

E009

■

●

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

3 0.50 2“ 0.7404 0.1410 0.1100 3 2.8 0.7404 N35 0580806 E009M34 0.70 2.1/8 0.2484 0.1680 0.1310 4 3.7 0.6526 0580813 E009M45 0.80 2.3/8 0.4303 0.1940 0.1520 4 4.6 0.8434 N14 0580820 E009M56 1.00 2.1/2 0.5075 0.2550 0.1910 4 5.5 1.0073 7/32 0580837 E009M68 1.25 2.23/32 0.5939 0.3180 0.2380 5 7.4 1.1891 0580844 E009M810 1.50 2.15/16 0.6020 0.3810 0.2860 6 9.3 1.2915 0580851 E009M1012 1.75 3.3/8 0.9055 0.3670 0.2750 6 11.2 7/16 0580868 E009M1214 2.00 3.19/32 0.9843 0.4290 0.3220 8 13.0 0580875 E009M14 1)

16 2.00 3.13/16 0.9843 0.4800 0.3600 8 15.0 0580882 E009M1620 2.50 4.15/32 1.1614 0.4890 0.4890 8 18.8 0580899 E009M2024 3.00 5.1/8 1.3976 0.8000 0.6000 8 22.5 0580905 E009M24





E094

E094

●

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

#Flutes

l4

Inch Stock #

EDP #ore-Code

3 0.50 2“ 0.7404 0.1410 0.1100 3 2.8 0.7404 N35 0583128 E094M34 0.70 2.1/8 0.2484 0.1680 0.1310 4 3.7 0.6526 0583135 E094M45 0.80 2.3/8 0.4303 0.1940 0.1520 4 4.6 0.8434 N14 0583142 E094M56 1.00 2.1/2 0.5075 0.2550 0.1910 4 5.5 1.0073 7/32 0583159 E094M68 1.25 2.23/32 0.5939 0.3180 0.2380 5 7.4 1.1891 0583166 E094M810 1.50 2.15/16 0.6020 0.3810 0.2860 6 9.3 1.2915 0583173 E094M10

E097

E097

■

●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm

l4

mm Stock #

EDP #ore-Code

2 0.40 41 8 2.50 2.00 4 1.8 8 0599884 E097M2 1)

2.5 0.45 44.5 9.5 2.80 2.24 5 2.3 9.5 0599891 E097M2.5 1)

3 0.50 48 12.5 3.15 2.50 5 2.8 12.5 0599907 E097M34 0.70 53 14 4.00 3.15 6 3.7 14 0599914 E097M45 0.80 58 11 5.00 4.00 7 4.6 22 0599921 E097M56 1.00 66 13 6.30 5.00 8 5.5 26 0599938 E097M68 1.25 72.0 16 8.00 6.30 9 7.4 29 0599945 E097M810 1.50 80.0 18 10.00 8.00 11 9.3 34 0599952 E097M1012 1.75 89.0 22 9.00 7.10 10 11.2 0599969 E097M1216 2.00 102.0 24 12.50 10.00 13 15 0599976 E097M16

1) Steel HSCo




E098

E098

■●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm

l4

mm Stock #

EDP #ore-Code

3 0.50 48 12.5 3.15 2.50 5 2.8 12.5 0599983 E098M34 0.70 53 14 4.00 3.15 6 3.7 14 0599990 E098M45 0.80 58 11 5.00 4.00 7 4.6 22 0600009 E098M56 1.00 66 13 6.30 5.00 8 5.5 26 0600016 E098M68 1.25 72 16 8.00 6.30 9 7.4 29 0600023 E098M810 1.50 80 18 10.00 8.00 11 9.3 34 0600030 E098M10

E099

E099

■

●

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm

l4

mm Stock #

EDP #ore-Code

4 0.70 53 14 4.00 3.15 6 3.7 14 0600047 E099M45 0.80 58 11 5.00 4.00 7 4.6 22 0600054 E099M56 1.00 66 13 6.30 5.00 8 5.5 26 0600061 E099M68 1.25 72 16 8.00 6.30 9 7.4 29 0600078 E099M810 1.50 80 18 10.00 8.00 11 9.3 34 0600085 E099M1012 1.75 89 22 9.00 7.10 10 11.2 0600092 E099M1216 2.00 102 24 12.50 10.00 13 15 0600108 E099M16

● MTT-X Tarauds machine● Thread Forming Taps MTT-X ● MTT-X Machos de máquina● Short chamfer

● MTT-X Tarauds machine● Thread Forming Taps MTT-X ● MTT-X Machos de máquina● Oil grooves, internal coolant, radial outlet


E080

E080

■

MPmm

l1

mm

l2

mm

d2Ømm

amm

l3

mm

l4

mm Stock #

EDP #ore-Code

2 0.40 41.0 8 2.50 2.00 4 1.8 8 0599518 E080M2 1)

2.5 0.45 44.5 9.5 2.80 2.24 5 2.3 9.5 0599525 E080M2.5 1)

3 0.50 48.0 12.5 3.15 2.50 5 2.8 12.5 0599532 E080M34 0.70 53.0 14 4.00 3.15 6 3.7 14 0599549 E080M45 0.80 58.0 11 5.00 4.00 7 4.6 22 0599556 E080M56 1.00 66.0 13 6.30 5.00 8 5.5 26 0599563 E080M68 1.25 72.0 16 8.00 6.30 9 7.4 29 0599570 E080M8

1) Steel HSCo



1580(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

1 64 1.11/16 3/8 0.141 0.110 3/16 H2 B 13100022 56 1.3/4 7/16 0.141 0.110 3/16 H2 B 13100042 56 1.3/4 7/16 0.141 0.110 3/16 H3 B 13100053 48 1.13/16 1/2 0.141 0.110 3/16 H2 B 13100083 48 1.13/16 1/2 0.141 0.110 3/16 H3 B 13100094 40 1.7/8 9/16 0.141 0.110 3/16 H3 P 13100124 40 1.7/8 9/16 0.141 0.110 3/16 H3 B 13100144 40 1.7/8 9/16 0.141 0.110 3/16 H5 P 13100134 40 1.7/8 9/16 0.141 0.110 3/16 H5 B 13100155 40 1.15/16 5/8 0.141 0.110 3/16 H3 P 13100205 40 1.15/16 5/8 0.141 0.110 3/16 H3 B 13100225 40 1.15/16 5/8 0.141 0.110 3/16 H5 P 13100215 40 1.15/16 5/8 0.141 0.110 3/16 H5 B 13100236 32 2“ 11/16 0.141 0.110 3/16 H3 P 13100286 32 2“ 11/16 0.141 0.110 3/16 H3 B 13100316 32 2“ 11/16 0.141 0.110 3/16 H5 P 13100296 32 2“ 11/16 0.141 0.110 3/16 H5 B 13100328 32 2.1/8 3/4 0.168 0.131 1/4 H3 P 13100388 32 2.1/8 3/4 0.168 0.131 1/4 H3 B 13100418 32 2.1/8 3/4 0.168 0.131 1/4 H5 P 13100398 32 2.1/8 3/4 0.168 0.131 1/4 H5 B 131004210 24 2.3/8 7/8 0.194 0.152 1/4 H4 P 131004810 24 2.3/8 7/8 0.194 0.152 1/4 H4 B 131005110 24 2.3/8 7/8 0.194 0.152 1/4 H6 P 131004910 24 2.3/8 7/8 0.194 0.152 1/4 H6 B 131005212 24 2.3/8 15/16 0.220 0.165 9/32 H4 P 131006012 24 2.3/8 15/16 0.220 0.165 9/32 H4 B 131006212 24 2.3/8 15/16 0.220 0.165 9/32 H6 B 13100631/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 P 13100681/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 B 13100711/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 P 13100691/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 B 13100725/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 13100785/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 13100805/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 13100813/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 13100863/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 13100887/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 13100947/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 13100961/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 13101021/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310104

■

●

● Tarauds machine● Thread Forming Taps ● Machos de máquina● Rol-Rite● The Rol-Rite spiral forming lobe

pattern reduces tapping torque but has no lube grooves


1580(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

0 80 1.5/8 5/16 0.141 0.110 3/16 H2 B 13100011 72 1.11/16 3/8 0.141 0.110 3/16 H2 B 13100032 64 1.3/4 7/16 0.141 0.110 3/16 H2 B 13100062 64 1.3/4 7/16 0.141 0.110 3/16 H3 B 13100073 56 1.13/16 1/2 0.141 0.110 3/16 H2 B 13100103 56 1.13/16 1/2 0.141 0.110 3/16 H3 B 13100114 48 1.7/8 9/16 0.141 0.110 3/16 H3 P 13100164 48 1.7/8 9/16 0.141 0.110 3/16 H3 B 13100185 44 1.15/16 5/8 0.141 0.110 3/16 H3 P 13100245 44 1.15/16 5/8 0.141 0.110 3/16 H3 B 13100266 40 2“ 11/16 0.141 0.110 3/16 H3 P 13100346 40 2“ 11/16 0.141 0.110 3/16 H3 B 13100366 40 2“ 11/16 0.141 0.110 3/16 H5 P 13100356 40 2“ 11/16 0.141 0.110 3/16 H5 B 13100378 36 2.1/8 3/4 0.168 0.131 1/4 H3 P 13100448 36 2.1/8 3/4 0.168 0.131 1/4 H3 B 131004610 32 2.3/8 7/8 0.194 0.152 1/4 H4 P 131005410 32 2.3/8 7/8 0.194 0.152 1/4 H4 B 131005710 32 2.3/8 7/8 0.194 0.152 1/4 H6 P 131005510 32 2.3/8 7/8 0.194 0.152 1/4 H6 B 131005812 28 2.3/8 15/16 0.220 0.165 9/32 H4 P 131006412 28 2.3/8 15/16 0.220 0.165 9/32 H4 B 131006612 28 2.3/8 15/16 0.220 0.165 9/32 H6 B 13100671/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 P 13100741/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 B 13100765/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 13100825/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 13100845/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 13100853/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 13100903/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 13100927/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 13100987/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 13101001/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 13101061/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310108

■

●




1580(M)

1580(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 P 1310400M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 B 1310401M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 P 1310402M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 B 1310403M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 P 1310404M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 B 1310405M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 P 1310406M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 B 1310407M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 P 1310408M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 B 1310409M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 P 1310410M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 B 1310411M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 P 1310412M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 B 1310413

■

●




3300(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

1 64 1.11/16 3/8 0.141 0.110 3/16 H2 B 13101112 56 1.3/4 7/16 0.141 0.110 3/16 H2 B 13101132 56 1.3/4 7/16 0.141 0.110 3/16 H3 B 13101143 48 1.13/16 1/2 0.141 0.110 3/16 H3 B 13101184 40 1.7/8 9/16 0.141 0.110 3/16 H3 P 13101214 40 1.7/8 9/16 0.141 0.110 3/16 H3 B 13101234 40 1.7/8 9/16 0.141 0.110 3/16 H5 P 13101224 40 1.7/8 9/16 0.141 0.110 3/16 H5 B 13101245 40 1.15/16 5/8 0.141 0.110 3/16 H3 P 13101295 40 1.15/16 5/8 0.141 0.110 3/16 H3 B 13101315 40 1.15/16 5/8 0.141 0.110 3/16 H5 P 13101305 40 1.15/16 5/8 0.141 0.110 3/16 H5 B 13101326 32 2“ 11/16 0.141 0.110 3/16 H3 P 13101376 32 2“ 11/16 0.141 0.110 3/16 H3 B 13101406 32 2“ 11/16 0.141 0.110 3/16 H5 P 13101386 32 2“ 11/16 0.141 0.110 3/16 H5 B 13101418 32 2.1/8 3/4 0.168 0.131 1/4 H3 P 13101478 32 2.1/8 3/4 0.168 0.131 1/4 H3 B 13101508 32 2.1/8 3/4 0.168 0.131 1/4 H5 P 13101488 32 2.1/8 3/4 0.168 0.131 1/4 H5 B 131015110 24 2.3/8 7/8 0.194 0.152 1/4 H4 P 131015710 24 2.3/8 7/8 0.194 0.152 1/4 H4 B 131016010 24 2.3/8 7/8 0.194 0.152 1/4 H6 P 131015810 24 2.3/8 7/8 0.194 0.152 1/4 H6 B 131016112 24 2.3/8 15/16 0.220 0.165 9/32 H4 P 131016912 24 2.3/8 15/16 0.220 0.165 9/32 H4 B 131017112 24 2.3/8 15/16 0.220 0.165 9/32 H6 B 13101721/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 P 13101771/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 B 13101801/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 P 13101781/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 B 13101815/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 13101875/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 13101895/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H7 P 13101885/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 13101903/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 13101953/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 13101973/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H7 P 13101963/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H7 B 13101987/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 13102037/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 13102051/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 13102111/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310213

■●

● Tarauds machine● Thread Forming Taps ● Machos de máquina● Rol-Form● The Rol-Form taps have lube

grooves for improved coolant flow in sizes #6 and larger


3300(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

0 80 1.5/8 5/16 0.141 0.110 3/16 H2 B 13101101 72 1.11/16 3/8 0.141 0.110 3/16 H2 B 13101122 64 1.3/4 7/16 0.141 0.110 3/16 H2 B 13101152 64 1.3/4 7/16 0.141 0.110 3/16 H3 B 13101163 56 1.13/16 1/2 0.141 0.110 3/16 H3 B 13101204 48 1.7/8 9/16 0.141 0.110 3/16 H3 P 13101254 48 1.7/8 9/16 0.141 0.110 3/16 H3 B 13101275 44 1.15/16 5/8 0.141 0.110 3/16 H3 P 13101335 44 1.15/16 5/8 0.141 0.110 3/16 H3 B 13101356 40 2“ 11/16 0.141 0.110 3/16 H3 P 13101436 40 2“ 11/16 0.141 0.110 3/16 H3 B 13101456 40 2“ 11/16 0.141 0.110 3/16 H5 B 13101468 36 2.1/8 3/4 0.168 0.131 1/4 H3 P 13101538 36 2.1/8 3/4 0.168 0.131 1/4 H3 B 131015510 32 2.3/8 7/8 0.194 0.152 1/4 H4 P 131016310 32 2.3/8 7/8 0.194 0.152 1/4 H4 B 131016610 32 2.3/8 7/8 0.194 0.152 1/4 H6 P 131016410 32 2.3/8 7/8 0.194 0.152 1/4 H6 B 131016712 28 2.3/8 15/16 0.220 0.165 9/32 H4 P 131017312 28 2.3/8 15/16 0.220 0.165 9/32 H4 B 13101751/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 P 13101831/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 B 13101855/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 13101915/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 13101935/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H7 P 13101925/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 13101943/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 13101993/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 13102013/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H7 P 13102003/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H7 B 13102027/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 13102077/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 13102091/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 13102151/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310217

■

●

● Tarauds machine● Thread Forming Taps ● Machos de máquina● Rol-Form● The Rol-Form taps have lube

grooves for improved coolant flow in sizes #6 and larger


3300(M)

3300(M)

MPmm

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 P 1310500M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 B 1310501M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 P 1310502M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 B 1310503M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 P 1310504M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 B 1310505M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 P 1310506M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 B 1310507M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 P 1310508M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 B 1310509M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 P 1310510M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 B 1310511M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 P 1310512M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 B 1310513

■

●

● Tarauds machine● Thread Forming Taps ● Machos de máquina● Rol-Form● The Rol-Form taps have lube grooves for improved coolant flow in sizes M4 and larger


3306E(UNC)

UNC TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

4 40 4“ 9/16 0.141 0.110 3/16 H3 B 13210024 40 4“ 9/16 0.141 0.110 3/16 H5 B 13210046 32 4“ 11/16 0.141 0.110 3/16 H3 B 13210066 32 4“ 11/16 0.141 0.110 3/16 H5 B 13210086 32 6“ 11/16 0.141 0.110 3/16 H3 B 13210106 32 6“ 11/16 0.141 0.110 3/16 H5 B 13210128 32 4“ 3/4 0.168 0.131 1/4 H3 B 13210148 32 4“ 3/4 0.168 0.131 1/4 H5 B 13210168 32 6“ 3/4 0.168 0.131 1/4 H3 B 13210188 32 6“ 3/4 0.168 0.131 1/4 H5 B 132102010 24 4“ 7/8 0.194 0.152 1/4 H4 B 132102210 24 4“ 7/8 0.194 0.152 1/4 H6 B 132102410 24 6“ 7/8 0.194 0.152 1/4 H4 B 132102610 24 6“ 7/8 0.194 0.152 1/4 H6 B 13210281/4 20 4“ 1“ 0.255 0.191 5/16 H4 B 13210381/4 20 4“ 1“ 0.255 0.191 5/16 H6 B 13210401/4 20 4“ 1“ 0.255 0.191 5/16 H8 B 13210421/4 20 6“ 1“ 0.255 0.191 5/16 H4 B 13210441/4 20 6“ 1“ 0.255 0.191 5/16 H6 B 13210461/4 20 6“ 1“ 0.255 0.191 5/16 H8 B 13210485/16 18 4“ 1.1/8 0.318 0.238 3/8 H5 B 13210625/16 18 4“ 1.1/8 0.318 0.238 3/8 H7 B 13210645/16 18 4“ 1.1/8 0.318 0.238 3/8 H9 B 13210665/16 18 6“ 1.1/8 0.318 0.238 3/8 H5 B 13210685/16 18 6“ 1.1/8 0.318 0.238 3/8 H7 B 13210705/16 18 6“ 1.1/8 0.318 0.238 3/8 H9 B 13210723/8 16 4“ 1.1/4 0.381 0.286 7/16 H5 B 13210863/8 16 4“ 1.1/4 0.381 0.286 7/16 H7 B 13210883/8 16 4“ 1.1/4 0.381 0.286 7/16 H9 B 13210903/8 16 6“ 1.1/4 0.381 0.286 7/16 H5 B 13210923/8 16 6“ 1.1/4 0.381 0.286 7/16 H7 B 13210943/8 16 6“ 1.1/4 0.381 0.286 7/16 H9 B 1321096

■

●

l3

● Tarauds machine● Thread Forming Taps ● Machos de máquina● Extension Rol-Form


3306E(UNF)

UNF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch Limits Chamfer

EDP #ore-Code

10 32 4“ 7/8 0.194 0.152 1/4 H4 B 132103010 32 4“ 7/8 0.194 0.152 1/4 H6 B 132103210 32 6“ 7/8 0.194 0.152 1/4 H6 B 132103610 32 6“ 7/8 0.194 0.152 1/4 H4 B 13210341/4 28 4“ 1“ 0.255 0.191 5/16 H4 B 13210501/4 28 4“ 1“ 0.255 0.191 5/16 H6 B 13210521/4 28 4“ 1“ 0.255 0.191 5/16 H8 B 13210541/4 28 6“ 1“ 0.255 0.191 5/16 H4 B 13210561/4 28 6“ 1“ 0.255 0.191 5/16 H6 B 13210581/4 28 6“ 1“ 0.255 0.191 5/16 H8 B 13210605/16 24 4“ 1.1/8 0.318 0.238 3/8 H5 B 13210745/16 24 4“ 1.1/8 0.318 0.238 3/8 H7 B 13210765/16 24 4“ 1.1/8 0.318 0.238 3/8 H9 B 13210785/16 24 6“ 1.1/8 0.318 0.238 3/8 H5 B 13210805/16 24 6“ 1.1/8 0.318 0.238 3/8 H7 B 13210825/16 24 6“ 1.1/8 0.318 0.238 3/8 H9 B 1321084

■

●

l3

● Tarauds machine● Thread Forming Taps ● Machos de máquina● Extension Rol-Form


● Tarauds machine

E710

E710

●

NPT TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm zStockNo.

EDP #ore-Code

1/16 27 7.94 65 17 8.1 6.0 8 6.3 4 0159491 E7101/16NO31/8 27 10.29 70 19 11.1 8.3 10 8.5 4 0099889 E7101/81/4 18 13.72 75 27 14.3 10.7 11 11 4 0099872 E7101/43/8 18 17.15 80 27 17.8 13.5 13 14.5 4 0099919 E7103/81/2 14 21.34 100 35 17.5 13.1 16 18 4 0099865 E7101/23/4 14 26.67 105 35 23.0 17.2 17 23 5 0099902 E7103/41“ 11.5 33.40 115 43 28.6 21.4 21 29 5 0099834 E71011.1/4 11.5 42.16 125 43 33.3 25.0 24 38 5 0099858 E7101.1/41.1/2 11.5 48.26 135 43 38.1 28.6 25 44 7 0099841 E7101.1/22“ 11.5 60.33 145 43 47.6 35.7 29 56 7 0099896 E7102

● Pipe Tap ● Machos de máquina


1541(NPT)

■●

NPT TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10105181/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10105281/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10105191/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10105203/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10105211/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10105223/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10105231“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 10105241.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 10105251.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 10105262“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1010527

TN1541

TN1541

■

●

NPT TPI

l1

mm

l2

mm

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10605191/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10605203/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10605211/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10605223/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1060523

● Pipe Tap, Straight Flute, Medium Hook

● Tarauds machine● Pipe Tap ● Machos de máquina● Straight flute, medium hook



1543(NPTF)

■

NPTF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10105291/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10105391/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10105301/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10105313/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10105321/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10105333/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10105341“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 10105351.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 10105361.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 1010537

●

TN1543

TN1543

■

●

NPTF TPI

l1

mm

l2

mm

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10605301/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10605313/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10605321/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10605333/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1060534




1544(NPT)

■

●

NPT TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10117601/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10117701/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10117611/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10117623/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10117631/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10117643/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10117651“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 10117661.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 10117671.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 10117682“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1011769

● Tarauds machine● Pipe Tap ● Machos de máquina● Straight flute, For cast iron and heat-treated alloy steels

1545(NPT)

■

●

NPT TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10128691/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10128791/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10128701/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10128713/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10128721/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10128733/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10128741“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 10128751.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 10128761.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 10128772“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1012878

● Tarauds machine● Pipe Tap ● Machos de máquina● High hook


1546(NPTF)

■

●

NPTF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10128801/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10128891/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10128811/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10128823/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10128831/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10128843/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10128851“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1012886


1545A(NPT)

■

●

NPT TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10528691/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10528701/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10528713/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10528721/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10528733/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1052874



1568(NPT)

■

●

NPT TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/8 27 2.1/8 3/4 0.313 0.234 3/8 5 10105601/8 27 2.1/8 3/4 0.438 0.328 3/8 5 10105511/4 18 2.7/16 1.1/16 0.563 0.421 7/16 5 10105523/8 18 2.9/16 1.1/16 0.700 0.531 1/2 5 10105531/2 14 3.1/8 1.3/8 0.688 0.515 5/8 5 10105543/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10105551“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 10105561.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 10105571.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 10105582“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1010559

● Tarauds machine● Pipe Tap ● Machos de máquina● Interrupted thread

1567(NPTF)

■

●

NPTF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/8 27 2.1/8 3/4 0.313 0.234 3/8 5 10105701/8 27 2.1/8 3/4 0.438 0.328 3/8 5 10105611/4 18 2.7/16 1.1/16 0.563 0.421 7/16 5 10105623/8 18 2.9/16 1.1/16 0.700 0.531 1/2 5 10105631/2 14 3.1/8 1.3/8 0.688 0.515 5/8 5 10105643/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10105651“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 10105661.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1010567

● Tarauds machine● Pipe Tap ● Machos de máquina● Interrupted thread


1549(NPTF)

■

●

NPTF TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10109211/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10109251/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10109231/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10109273/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10109291/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10109313/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10109331“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010935

● Tarauds machine● Pipe Tap ● Machos de máquina● Medium hook

1548(NPT)

■●

NPT TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 10109201/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10109241/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10109221/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10109263/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10109281/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10109303/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10109321“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010934

● Tarauds machine● Pipe Tap ● Machos de máquina● Medium hook


1542(NPS)

■

●

NPS TPI

l1

Inch

l2

Inch

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10105871/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10105811/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10105823/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10105831/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10105843/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 10105851“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010586

● Tarauds machine● Pipe Tap ● Machos de máquina

1592(NPSF)

■

●

NPSF TPI

l1

mm

l2

mm

d2ØInch /

aInch

l3

Inch#Flutes

EDP #ore-Code

1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 10105921/8 27 2.1/8 3/4 0.438 0.328 3/8 4 10105881/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 10105893/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 10105901/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 10105913/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1011070

● Tarauds machine● Pipe Tap ● Machos de máquina● Dryseal


E040

E040

■

●

G(BSP) TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569764 E0401/81/4 19 13.157 100 19 10 8 11 3 11.80 0569771 E0401/43/8 19 16.662 100 21 12.5 10 13 3 15.25 0569788 E0403/81/2 14 20.955 125 26 16 12.5 16 4 19.00 0569795 E0401/23/4 14 26.441 140 28 20 16 20 4 24.50 0569801 E0403/4

E041

E041

■

●

G(BSP) TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569818 E0411/81/4 19 13.157 100 19 10 8 11 3 11.80 0569825 E0411/43/8 19 16.662 100 21 12.5 10 13 3 15.25 0569832 E0413/81/2 14 20.955 125 26 16 12.5 16 4 19.00 0569849 E0411/23/4 14 26.441 140 28 20 16 20 4 24.50 0569856 E0413/4

● MTT-X Tarauds machine● Machine Tap MTT-X ● MTT-X Machos de máquina



E042

E042

■

●

G(BSP) TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569863 E0421/81/4 19 13.157 100 19 10 8 11 3 11.80 0569870 E0421/43/8 19 16.662 100 21 12.5 10 13 4 15.25 0569887 E0423/81/2 14 20.955 125 26 16 12.5 16 4 19.00 0569894 E0421/23/4 14 26.441 140 28 20 16 20 4 24.50 0569900 E0423/4

E043

E043

■

●

G(BSP) TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569917 E0431/81/4 19 13.157 100 19 10 8 11 3 11.80 0569924 E0431/43/8 19 16.662 100 21 12.5 10 13 4 15.25 0569931 E0433/81/2 14 20.955 125 26 16 12.5 16 4 19.00 0569948 E0431/23/4 14 26.441 140 28 20 16 20 4 24.50 0569955 E0433/4




E547

E547

●

G(BSP) TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1/8 28 9.728 59 15 8.0 8.0 9 4 8.8 0157169 E5471/8NO11/8 28 9.728 59 15 8.0 6.3 9 4 8.8 0157176 E5471/8NO21/8 28 9.728 59 15 8.0 6.3 9 4 8.8 0099285 E5471/8NO31/8 28 9.728 59 15 8.0 6.3 9 4 8.8 0157183 E5471/8NO71/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0157190 E5471/4NO11/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0157206 E5471/4NO21/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0099278 E5471/4NO31/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0157213 E5471/4NO73/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0157220 E5473/8NO13/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0157237 E5473/8NO23/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0099315 E5473/8NO33/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0157244 E5473/8NO71/2 14 20.955 87 26 16.0 12.5 16 4 19 0157251 E5471/2NO11/2 14 20.955 87 26 16.0 12.5 16 4 19 0157268 E5471/2NO21/2 14 20.955 87 26 16.0 12.5 16 4 19 0099261 E5471/2NO31/2 14 20.955 87 26 16.0 12.5 16 4 19 0157275 E5471/2NO75/8 14 22.911 91 26 18.0 14.0 18 4 21 0157282 E5475/8NO15/8 14 22.911 91 26 18.0 14.0 18 4 21 0099322 E5475/8NO25/8 14 22.911 91 26 18.0 14.0 18 4 21 0099339 E5475/8NO35/8 14 22.911 91 26 18.0 14.0 18 4 21 0340684 E5475/8NO73/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0157299 E5473/4NO13/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0150757 E5473/4NO23/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0099308 E5473/4NO33/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0160763 E5473/4NO77/8 14 30.201 102 29 22.4 18.0 22 4 28.25 0157305 E5477/8NO17/8 14 30.201 102 29 22.4 18.0 22 4 28.25 0099353 E5477/8NO27/8 14 30.201 102 29 22.4 18.0 22 4 28.25 0099360 E5477/8NO31“ 11 33.249 109 33 25.0 20.0 24 4 30.75 0157312 E5471NO11“ 11 33.249 109 33 25.0 20.0 24 4 30.75 0157329 E5471NO21“ 11 33.249 109 33 25.0 20.0 24 4 30.75 0099254 E5471NO31.1/4 11 41.910 119 36 31.5 25.0 28 6 39.5 0157336 E5471.1/4NO11.1/4 11 41.910 119 36 31.5 25.0 28 6 39.5 0099216 E5471.1/4NO21.1/4 11 41.910 119 36 31.5 25.0 28 6 39.5 0099223 E5471.1/4NO31.1/2 11 47.803 125 37 35.5 28.0 31 6 45 0157343 E5471.1/2NO11.1/2 11 47.803 125 37 35.5 28.0 31 6 45 0099193 E5471.1/2NO21.1/2 11 47.803 125 37 35.5 28.0 31 6 45 0099209 E5471.1/2NO31.3/4 11 53.746 132 39 35.5 28.0 31 6 51 0157350 E5471.3/4NO11.3/4 11 53.746 132 39 35.5 28.0 31 6 51 0099230 E5471.3/4NO2

● Tarauds machine● Machine Tap ● Machos de máquina● BSPP


E547

G(BSP) TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1.3/4 11 53.746 132 39 35.5 28.0 31 6 51 0099247 E5471.3/4NO32“ 11 59.614 140 41 40.0 31.5 34 6 57 0157367 E5472NO12“ 11 59.614 140 41 40.0 31.5 34 6 57 0157374 E5472NO22“ 11 59.614 140 41 40.0 31.5 34 6 57 0099292 E5472NO32.1/4 11 65.710 142 42 40.0 31.5 34 6 63 0157404 E5472.1/4NO12.1/4 11 65.710 142 42 40.0 31.5 34 6 63 0157411 E5472.1/4NO22.1/4 11 65.710 142 42 40.0 31.5 34 6 63 0123775 E5472.1/4NO32.1/2 11 75.184 153 45 45.0 35.5 38 6 72.5 0157381 E5472.1/2NO12.1/2 11 75.184 153 45 45.0 35.5 38 6 72.5 0157398 E5472.1/2NO22.1/2 11 75.184 153 45 45.0 35.5 38 6 72.5 0123768 E5472.1/2NO33“ 11 87.884 164 48 50.0 40.0 42 8 85.5 0157428 E5473NO13“ 11 87.884 164 48 50.0 40.0 42 8 85.5 0157435 E5473NO23“ 11 87.884 164 48 50.0 40.0 42 8 85.5 0123782 E5473NO3

E550

E550

■

●

Rc TPI

d1nommm

l1

mm

l2

mm

d2Ømm

amm

l3

mm#Flutes Stock #

EDP #ore-Code

1/8 28 9.728 59 15 8.0 6.3 9 3 8.4 0099490 E5501/81/8 28 9.728 59 15 8.0 6.3 9 3 8.4 0159408 E5501/8NO71/4 19 13.157 67 19 10.0 8.0 11 3 11.2 0099483 E5501/41/4 19 13.157 67 19 10.0 8.0 11 3 11.2 0159422 E5501/4NO73/8 19 16.662 75 21 12.5 10.0 13 3 14.75 0099520 E5503/83/8 19 16.662 75 21 12.5 10.0 13 3 14.75 0159446 E5503/8NO71/2 14 20.955 87 26 16.0 12.5 16 5 18.25 0099476 E5501/21/2 14 20.955 87 26 16.0 12.5 16 5 18.25 0159460 E5501/2NO73/4 14 26.441 96 28 20.0 16.0 20 5 23.75 0099513 E5503/43/4 14 26.441 96 28 20.0 16.0 20 5 23.75 0159484 E5503/4NO71 11 33.249 109 33 25.0 20.0 24 5 30 0099445 E55011.1/4 11 41.910 119 36 31.5 25.0 28 5 38.5 0099469 E5501.1/41.1/2 11 47.803 125 37 35.5 28.0 31 7 44.5 0099452 E5501.1/22“ 11 59.614 140 41 40.0 31.5 34 7 56 0099506 E5502

● Tarauds machine● Machine Tap ● Machos de máquina● BSPT


1994(UNC) - (UNF)

●

UNC TPI

l1

Inch

l2

Inch

d2ØInch

aInch

l3

Inch#Flutes

EDP #ore-Code

4 40 1.7/8 3/8 0.141 0.110 3/16 2 11100105 40 1.15/16 13/32 0.141 0.110 3/16 2 11100206 32 2“ 7/16 0.141 0.110 3/16 2 11100308 32 2.1/8 1/2 0.168 0.131 1/4 2 111004010 24 2.3/8 5/8 0.194 0.152 1/4 2 111005012 24 2.3/8 21/32 0.220 0.165 9/32 2 11100601/4 20 2.1/2 25/32 0.255 0.191 5/16 2 11100805/16 18 2.27/32 15/16 0.318 0.238 3/8 2 11100903/8 16 3.3/8 1.1/16 0.381 0.286 7/16 2 11101007/16 14 3.3/4 1.1/4 0.323 0.242 13/32 2 11101101/2 13 4.1/16 1.3/8 0.367 0.275 7/16 2 1110120

● Foret taraudeur● Combination Drill and Tap ● Combinación broca-macho

●

UNF TPI

l1

Inch

l2

Inch

d2ØInch

aInch

l3

Inch#Flutes

EDP #ore-Code

4 48 1.7/8 3/8 0.141 0.110 3/16 2 11100125 44 1.15/16 13/32 0.141 0.110 3/16 2 11100246 40 2“ 7/16 0.141 0.110 3/16 2 11100348 36 2.1/8 1/2 0.168 0.131 1/4 2 111004410 32 2.3/8 5/8 0.194 0.152 1/4 2 111005412 28 2.3/8 21/32 0.220 0.165 9/32 2 11100641/4 28 2.1/2 25/32 0.255 0.191 5/16 2 11100845/16 24 2.27/32 15/16 0.318 0.238 3/8 2 11100943/8 24 3.3/8 1.1/16 0.381 0.286 7/16 2 11101047/16 20 3.3/4 1.1/4 0.323 0.242 13/32 2 11101141/2 20 4.1/16 1.3/8 0.367 0.275 7/16 2 1110124

1994(UNF)


E650 - E651● Foret taraudeur● Combination Drill and Tap ● Combinación broca-macho

E650

●

MPmm

d1Ømm

l1

mm

l2

mm

l4

mm

d2Ømm

amm

l3

mm#Flutes

Stock #

EDP #ore-Code

3 0.50 2.5 56 10 6 3.15 2.5 5.0 2 0167861 E650M34 0.70 3.3 65 12 8 4.0 3.15 6.0 2 0127551 E650M45 0.80 4.2 69 15 10 5.0 4.00 7.0 2 0127568 E650M56 1.00 5.0 84 18 12 6.3 5.00 8.0 2 0127575 E650M68 1.25 6.8 96 21 16 8.0 6.30 9.0 2 0127582 E650M810 1.50 8.5 108 22 20 10.0 8.00 11.0 2 0127513 E650M1012 1.75 10.2 113 29 24 9.0 7.10 10.0 2 0127520 E650M1214 2.00 12.0 123 30 28 11.2 9.00 12.0 2 0127537 E650M1416 2.00 14.0 134 32 32 12.5 10.00 13.0 2 0127544 E650M16

E651

●

UNC TPI

d1nommm

d2Ømm

l1

mm

l4 l2

mmamm

DormerStockNo.

EDP #ore-Code

6 32 2.80 3.5 56.9 6 12 2.90 5.00 0388907 E6516-328 32 3.50 4.50 64 8 12 3.55 6.00 0273272 E6518-3210 24 3.90 5.00 72 10 15 4.00 7.00 0273197 E65110-2412 24 4.50 5.60 77 11 15 4.50 7.00 0273210 E65112-241/4 20 5.20 6.30 83 13 17 5.00 8.00 0273227 E6511/45/16 18 6.60 8.00 94 16 21 6.30 9.00 0273241 E6515/163/8 16 8.00 10.00 104 19 23 8.00 11.00 0273234 E6513/87/16 14 9.40 8.00 107 22 25 6.30 9.00 0273265 E6517/161/2 13 10.80 9.00 114 25 29 7.10 10.00 0273203 E6511/29/16 12 12.20 11.20 124 28 29 9.00 12.00 0273289 E6519/165/8 11 13.50 12.50 134 32.5 31 10.00 13.00 0273258 E6515/8


E653● Foret taraudeur● Combination Drill and Tap ● Combinación broca-macho

E653

●

d1ØInch TPI

l1

Inch

l2

Inch

d2ØInch

aInch z

StockCode

DormerStockNo.

EDP #ore-Code

1/16 27 2.13/16 11/16 0.3120 0.2340 4 52788 0297254 E6531/161/8 27 2.7/8 3/4 0.4370 0.3280 4 52791 0297285 E6531/81/4 18 3.5/16 1.1/16 0.5620 0.4210 4 52794 0297278 E6531/43/8 18 3.1/2 1.1/16 0.7000 0.5310 4 52797 0297308 E6533/81/2 14 4.3/8 1.3/8 0.6870 0.5150 4 52800 0297261 E6531/23/4 14 4.9/16 1.3/8 0.9060 0.6790 5 52803 0297292 E6533/41“ 11.5 5.3/8 1.3/4 1.1250 0.8430 5 52806 0297247 E6531


● Tourne à gauche

229C

229C

Nr. A B UNC

EDP #ore-Code

229C 1500,1528 taps; R10P and R18P drills 9 6-32,8-32,10-24,10-32,1/4-20,5/16-18,3/8-16,7/16-14,1/2-13 4111502

● Drill-Tap Set, Metal Index ● Juego de Brocas/ Machos, serie corta● A=Type of Product in Set, B= No of Pieces, C= Diameters in set

1215

Nr.

HandReamerCapacity (inch)

HandReamer Capacity (mm)

FractionalTapCapacity (inch)

FractionalTapCapacity (mm)

EDP #ore-Code

T0 1/8 - 3/16 M3 - M5 1/16 - 5/32 M1 - M4 1810372T1 3/16 - 5/16 M4 - M7 3/16 - 7/16 M4 - M10 1810373T2 1/4 - 15/32 M6 - M14 1/4 - 9/16 M6 - M14 1810374

● Tap Wrench● Designed for hand tapping in tight places

and can also be used with any tool that can be turned by hand

● T-Handle furnished with a sliding handle. They are strong and rugged yet light enough to ensure easy and accurate handling

● Portamachos regulable


● Tourne à gauche

1301 - 8007

DieStock#

OverallLength

TakesDie O.D.

EDP #ore-Code

D2 6.3/8 13/16 1810042D3 9 1 1810043D6 14 1.1/2 1810096D14 40.3/4 3 1810034200 (Style = 8007) 14.3/4 2 1810053

3850

Nr.

HandReamerCapacity (inch)

HandReamer Capacity (mm)

FractionalTapCapacity (inch)

FractionalTapCapacity (mm)

EDP #ore-Code

8 1/8 - 5/16 M3 - M8 1/16-5/16 M1 - M8 18100179 3/16 - 3/8 M5 - M9 3/16-1/2 M4 - M12 181001810 1/4 - 9/16 M6 - M14 1/4-3/4 M3 - M8 181001911 3/8 - 3/4 M9 - M19 3/8-1“ M10 - M25 181002012 3/8 - 7/8 M9 - M22 3/8-1.1/8 M10 - M27 181002114 5/8 - 1.1/2 M16 - M39 7/8-1.7/8 M22 - M42 1810022

● Tap Wrench● Designed for hand tapping in

tight places and can also be used with any tool that can be turned by hand

● Straight handle design provides greater leverage, particularly suited for use with larger diameters

● Portamachos regulable

● Die Stocks● Designed for use with adjustable

round split dies● The die is held securely by two

opposed screws in the stock which locate in two indents in the die

● Porte filières ● Maneta para Terrajas “ Portaterrajas”


2025(UNS - NPT)

UNC TPI

d2ØInch

h1Inch

EDP #ore-Code

1/4 20 19/32 1/2 14102395/16 18 11/16 5/16 14102413/8 16 25/32 3/8 14102437/16 14 7/8 7/16 14102451/2 13 1.1/16 1/2 14102479/16 12 1.1/16 1/2 14102495/8 11 1.1/4 5/8 14102513/4 10 1.7/16 3/4 14102557/8 9 1.5/8 7/8 14102571“ 8 1.13/16 1 14102591.1/8 7 2“ 1 14102621.1/4 7 2.3/16 1 14102641.3/8 6 2.3/8 1 14102661.1/2 6 2.9/16 1 1410268

UNF TPI

d2ØInch

h1Inch

EDP #ore-Code

1/4 28 19/32 1/2 14102405/16 24 11/16 5/16 14102423/8 24 25/32 3/8 14102447/16 20 7/8 7/16 14102461/2 20 1.1/16 1/2 14102489/16 18 1.1/16 1/2 14102505/8 18 1.1/4 5/8 14102523/4 16 1.7/16 3/4 14102567/8 14 1.5/8 7/8 14102581“ 12 1.13/16 1“ 14102601.1/8 12 2“ 1“ 14102631.1/4 12 2.3/16 1“ 14102651.3/8 12 2.3/8 1“ 14102671.1/2 12 2.9/16 1“ 1410269

UNS TPI

d2ØInch

h1Inch

EDP #ore-Code

11/16 11 1.7/16 3/4 141025311/16 16 1.7/16 3/4 14102541“ 14 1.13/16 1“ 1410261

NPT TPI

d2ØInch

h1Inch

EDP #ore-Code

1/8 27 1.1/6 3/8 14102701/4 18 1.1/4 5/8 14102713/8 18 1.1/16 5/8 14102721/2 14 1.5/8 3/4 14102733/4 14 2“ 13/16 14102741“ 11.1/2 2.3/8 1“ 1410275

d2

d2

2025(UNC - UNF)

● Hexagon Rethreading Bolt Dies ● Filières hexagonales BSPF ● Terrajas, exterior hexagonal

● Hexagon Rethreading Bolt Dies ● Filières hexagonales BSPF ● Terrajas, exterior hexagonal


2025S

Nr. A B UNC UNF

EDP #ore-Code

set 821 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1410277set 822 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4,7/8,1“ 1410278set 831 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1410280set 832 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4,7/8,1-14(UNS) 1410281set 824 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2 1/4,5/16,3/8,7/16,1/2 1410282set 825 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1410283

MPmm

d2ØInch

h1Inch

EDP #ore-Code

6.0 1.00 19/32 1/4 14106097.0 1.00 11/16 5/16 14106108.0 1.25 11/16 5/16 14106119.0 1.25 25/32 3/8 141061210.0 1.50 7/8 7/16 141061311.0 1.50 7/8 7/16 1410614

MPmm

d2ØInch

h1Inch

EDP #ore-Code

12.0 1.75 1.1/16 1/2 141061514.0 1.25 1.1/16 1/2 141061714.0 2.00 1.1/16 1/2 141061616.0 2.00 1.1/4 5/8 141061818.0 1.50 1.7/16 3/4 141062018.0 2.50 1.7/16 3/4 141061920.0 2.50 1.7/16 3/4 1410621

2325M

d2

● Filières hexagonales BSPF● Hexagon Rethreading Bolt Dies ● Terrajas, exterior hexagonal

● Filières hexagonales BSPF● Hexagon Rethreading Bolt Dies ● Terrajas, exterior hexagonal


2010(UNC - UNF)

UNC TPI

d2ØInch

EDP #ore-Code

1 64 13/16 14100042 56 13/16 14100083 48 13/16 14100124 40 13/16 14100165 40 13/16 14100226 32 13/16 14100266 32 1“ 14100278 32 13/16 14100328 32 1“ 141003310 24 13/16 141003810 24 1“ 141003912 24 13/16 141004412 24 1“ 14100451/4 20 13/16 14100631/4 20 1“ 14100641/4 20 1.1/2 14100661/4 20 2“ 14100675/16 18 13/16 14100795/16 18 1“ 14100805/16 18 1.1/2 14100825/16 18 2“ 14100833/8 16 1“ 14100933/8 16 1.1/2 14100953/8 16 2“ 14100967/16 14 1“ 14101017/16 14 1.1/2 14101037/16 14 2“ 14101041/2 13 1.1/2 14101101/2 13 2“ 14101119/16 12 1.1/2 14101179/16 12 2“ 14101185/8 11 1.1/2 14101235/8 11 2“ 14101243/4 10 2“ 14101317/8 9 2“ 14101351“ 8 3“ 14101401.1/8 7 3“ 14101451.1/4 7 3“ 14101471.3/8 6 3“ 14101491.1/2 6 3“ 1410151

UNF TPI

d2ØInch

EDP #ore-Code

0 80 13/16 14100021 72 13/16 14100062 64 13/16 14100103 56 13/16 14100144 48 13/16 14100185 44 13/16 14100246 40 13/16 14100298 36 13/16 141003510 32 13/16 141004110 32 1“ 141004212 28 13/16 14100471/4 28 13/16 14100681/4 28 1“ 14100691/4 28 1.1/2 14100711/4 28 2“ 14100721/4 32 1“ 14100775/16 24 1“ 14100855/16 24 1.1/2 14100875/16 24 2“ 14100885/16 32 1“ 14100903/8 24 1“ 14100973/8 24 1.1/2 14100993/8 24 2“ 14101007/16 20 1“ 14101057/16 20 1.1/2 14101077/16 20 2“ 14101081/2 20 1.1/2 14101141/2 20 2“ 14101159/16 18 1.1/2 14101209/16 18 2“ 14101215/8 18 1.1/2 14101265/8 18 2“ 14101273/4 16 2“ 14101337/8 14 2“ 14101371“ 12 3“ 14101421.1/8 12 3“ 14101461.1/4 12 3“ 14101481.3/8 12 3“ 14101501.1/2 12 3“ 1410152

● Round Adjustable Split Dies● Used for threading bolts, studs, rods and other applications requiring external threads

● Filières extensibles ● Terraja tipo abierto


2010(UNS - NPT)

UNS TPI

d2ØInch

EDP #ore-Code

4 36 13/16 14100201/4 24 1“ 14100741“ 14 3“ 1410144

NPT TPI

d2ØInch

EDP #ore-Code

1/8 27 1“ 14102031/8 27 1.1/2 14102041/4 18 1.1/2 14102051/4 18 2“ 14102063/8 18 1.1/2 14102073/8 18 2“ 14102081/2 14 2“ 1410209

UNC TPI

d2ØInch

EDP #ore-Code

5 40 13/16 14101536 32 13/16 14101556 32 1“ 14101568 32 13/16 14101598 32 1“ 141016010 24 13/16 141016310 24 1“ 141016412 24 13/16 141016712 24 1“ 14101681/4 20 13/16 14101711/4 20 1“ 14101721/4 20 1.1/2 14101735/16 18 13/16 1410177

UNC TPI

d2ØInch

EDP #ore-Code

5/16 18 1“ 14101785/16 18 1.1/2 14101793/8 16 1“ 14101833/8 16 1.1/2 14101847/16 14 1“ 14101877/16 14 1.1/2 14101881/2 13 1.1/2 14101919/16 12 1.1/2 14101935/8 11 1.1/2 14101955/8 11 2“ 14101963/4 10 2“ 14101997/8 9 2“ 1410201

2510(UNC)






2510(UNF)

2710M

MPmm

d2ØInch

EDP #ore-Code

2.0 0.40 13/16 14105732.3 0.40 13/16 14105742.5 0.45 13/16 14105752.6 0.45 13/16 14105763.0 0.50 13/16 14105773.5 0.60 13/16 14105784.0 0.70 13/16 14105794.5 0.75 13/16 14105805.0 0.80 13/16 14105816.0 1.00 1“ 14105827.0 1.00 1“ 14105838.0 1.25 1“ 1410584

MPmm

d2ØInch

EDP #ore-Code

9.0 1.25 1“ 141058510.0 1.50 1“ 141058611.0 1.50 1“ 141058712.0 1.75 1“ 141063012.0 1.75 1.1/2 141058814.0 2.00 1.1/2 141058916.0 2.00 1.1/2 141059018.0 2.50 2“ 141059120.0 2.50 2“ 1410592

UNF TPI

d2ØInch

EDP #ore-Code

5 44 13/16 14101546 40 13/16 14101578 36 13/16 141016110 32 13/16 141016510 32 1“ 141016612 28 13/16 14101691/4 28 13/16 14101741/4 28 1“ 14101751/4 28 1.1/2 14101765/16 24 13/16 14101805/16 24 1“ 1410181

UNF TPI

d2ØInch

EDP #ore-Code

5/16 24 1.1/2 14101823/8 24 1“ 14101853/8 24 1.1/2 14101867/16 20 1“ 14101897/16 20 1.1/2 14101901/2 20 1.1/2 14101929/16 18 1.1/2 14101945/8 18 1.1/2 14101975/8 18 2“ 14101983/4 16 2“ 14102007/8 14 2“ 1410202






Style DescriptionDie Stock #

Die Stock Length

Tap Wrench #

OutsideDiameter Dies

EDP # or e-Code

3150 Master Series: UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16, 7/16-14,1/2-13, 9/16-12, 5/8-11 (16 piece set) UNF TAP SIZES: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18, 5/8-18 (16 piece set)

D-6 D-6

14“ 14“

8-10 10

1.1/2“ 1.1/2

1610078 1610079

General Purpose: UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16, 1/2-13, 9/16-12, 5/8-11, 2-56, 3-48, 6-32, 8-32,10-24,12-24 UNF TAP SIZES: 1/4-28, 5/16-24, 3/8-24, 1/2-20, 9/16-18, 5/8-18 UNS SIZE: 4-36 (42 piece set)

D-2 & D-6 7“-14“ 8-10 13/16“(UNC); 1.1/2(UNC) 1.1/2(UNF)

1610080

70H: UNC TAP SIZES: 4-36NS, 6-32, 8-32, 10-24, 12-24, 1/4 - 20, 5/16 - 18 (16 piece set)

D-2

7“

8

13/16“

1610065

70K: UNC TAP SIZES: 2-56, 3-48, 4-36 NS, 5-40, 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16 -18 (22 piece set)

D-2 7“ 8 13/16“ 1610067

70M: UNF TAP SIZES: NC and NF 4-36 NS, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20 (16 piece set)

D-2

7“

8

13/16“

1610070

70P: UNF TAP SIZES: NC and NF 4-40, 4-48, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28 (22 piece set)

D-2

7“

8

13/16“

1610072

90A: UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 5/8-11 (15 piece set)

D3, D-6

9“-14“

10

1/4“ to 3/8“-1, 7/16“ to 5/8“-1.1/2“

1610076

90B: UNF TAP SIZES :1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 5/8-18, 3/4-16, 7/8-14 (22 piece set)

D-3, D-6 200

9“-14“-16“

9 and 11

1/4“ to 3/8“-1“; 7/16“ to 5/8“-1.1/2“; 3/4“ to 7/8“-2“

1610077

*

1702M: M2.0 x 0.40, M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.60, M4.0 x 0.70, M4.5 x 0.75, M5.0 x 0.80 AND 1.6 mm, 2.05 mm, 2.5 mm, 2.9 mm, 3.3 mm, 3.7 mm, 4.2 mm (23 piece set)

D-2

7“

T-0

13/16“

1610087

*

1703M: M6 x 1.00, M7 x 1.00, M8 x 1.25, M10 x 1.50, M12 x 1.75 AND 5.0 mm, 6.0 mm, 6.7 mm, 8.5 mm, 10.2 mm (17 piece set)

D-3

9“

T-2

1“

1610088

3150● One plug tap and one round die for each cutting size

*One plug tap, one round die and one tap drill for each cutting size

● Tap and Round Die Screw Plate Sets

Solid Carbide End Mill Table of ContentsStyle Description #Flutes Finish Page No.


High HelixE3603 60°, High Helix 3-Flute Bright 354E3603G 60°, High Helix 3-Flute TiN 354E3603V 60°, High Helix 3-Flute TiALN 3552-FluteE1302 Stub Length 2-Flute Bright 355E1302G Stub Length 2-Flute TiN 356 E1302V Stub Length 2-Flute TiALN 356E2302 Stub Length 2-Flute Bright 357E3302 Regular Length 2-Flute Bright 357E3302G Regular Length 2-Flute TiN 358E3302V Regular Length 2-Flute TiALN 359 E3302M Regular Length, Metric 2-Flute Bright 360E3302MG Regular Length, Metric 2-Flute TiN 361E3302MV Regular Length, Metric 2-Flute TiALN 362EB3302 Ball Nose, Regular Length 3-Flute Bright 363EB3302G Ball Nose, Regular Length 3-Flute TiN 364 EB3302V Ball Nose, Regular Length 3-Flute TiALN 365EB3302M Ball Nose, Regular Length, Metric 2-Flute Bright 366EB3302MG Ball Nose, Regular Length, Metric 2-Flute TiN 367EB3302MV Ball Nose, Regular Length, Metric 2-Flute TiALN 368E4302 Double End, Regular Length 2-Flute Bright 368 EB4302 Ball Nose, Double End, Regular Length 2-Flute Bright 369E6302 Extra Length 2-Flute Bright 369E6302G Extra Length 2-Flute TiN 370E6302V Extra Length 2-Flute TiALN 370EB6302 Ball Nose, Extra Length 2-Flute Bright 371 EB6302G Ball Nose, Extra Length 2-Flute TiN 371EB6302V Ball Nose, Extra Length 2-Flute TiALN 372

E3303 Regular Length 3-Flute Bright 372E3303G Regular Length 3-Flute TiN 373E3303V Regular Length 3-Flute TiALN 373 E1304 Stub Length 4-Flute Bright 374E1304G Stub Length 4-Flute TiN 374E1304V Stub Length 4-Flute TiALN 375E2304 Stub Length 4-Flute Bright 375E3304 Regular Length 4-Flute Bright 376 E3304G Regular Length 4-Flute TiN 377E3304V Regular Length 4-Flute TiALN 378E3304M Regular Length, Metric 4-Flute Bright 379E3304MG Regular Length, Metric 4-Flute TiN 380E3304MV Regular Length, Metric 4-Flute TiALN 381 EB3304 Ball Nose, Regular Length 4-Flute Bright 382EB3304G Ball Nose, Regular Length 4-Flute TiN 383EB3304V Ball Nose, Regular Length 4-Flute TiALN 384EB3304M Ball Nose, Regular Length, Metric 4-Flute Bright 385EB3304MG Ball Nose, Regular Length, Metric 4-Flute TiN 386 EB3304MV Ball Nose, Regular Length, Metric 4-Flute TiALN 384E4304 Double End, Regular Length 4-Flute Bright 386EB4304 Ball Nose, Double End, Regular Length 4-Flute Bright 387E6304 Extra Length 4-Flute Bright 387E6304G Extra Length 4-Flute TiN 388 E6304V Extra Length 4-Flute TiALN 388EB6304 Ball Nose, Extra Length 4-Flute Bright 389EB6304G Ball Nose, Extra Length 4-Flute TiN 389EB6304V Ball Nose, Extra Length 4-Flute TiALN 390

3-Flute

4-Flute

RTDA Router 3-Flute Bright 390


How To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code). 2. Find the closest diameter for your cutting application on the chart. 3. Select the type of cut and # Flutes to find your Ft Range.

# of Flutes

Depth/ Width of Cut 1/8 5/32 3/16 1/4 5/16 13/32 1/2 9/16 5/8 11/16 3/4

>4 ↕ 1,5↔ 0,05

A 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.002

B 0.002 0.002 0.002 0.003 0.003 0.004 0.004 0.004

C 0.003 0.003 0.004 0.004 0.005 0.005 0.006 0.007

3-4 ↕ 1,5↔ 0,1

A 0.001 0.001 0.002 0.002 0.002 0.002 0.003 0.003 0.004 0.004 0.005

B 0.001 0.002 0.002 0.003 0.003 0.004 0.004 0.005 0.005 0.006 0.007

C 0.001 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008 0.009

3-4 ↕ 1↔ 0,5

A 0.000 0.000 0.000 0.001 0.001 0.001 0.001 0.002 0.002 0.002 0.002

B 0.003 0.000 0.001 0.001 0.001 0.002 0.002 0.002 0.003 0.003 0.004

C 0.000 0.001 0.001 0.001 0.002 0.002 0.003 0.003 0.004 0.004 0.005

2-3 ↕ 0,5↔ 1

A 0.000 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.002 0.002 0.003

B 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.003 0.003 0.004 0.004

C 0.001 0.001 0.001 0.002 0.002 0.003 0.003 0.004 0.004 0.005 0.005

3-4

↕ 0,5↔ 1

↕ 1

B 0.001 0.002 0.003 0.003 0.003 0.004 0.004 0.004

2&4

↕ 0,1 - 0,5mm

↔ 0,1 - 0,5mm

A

BC 0.001 0.001 0.001 0.001 0.002 0.002 0.002 0.003 0.003

0.001 0.001 0.001 0.002 0.002 0.002 0.003 0.003 0.004

4

↕ 0,01 - 0,1

↔ ≤ 1

A

BC 0.002 0.002 0.002 0.003 0.003

0.002 0.002 0.003 0.003 0.004

Feed Per Tooth (Ft) Dia InchesAlpha Code

Easy Calculations: (inch)

RPM = SFM/D x 3.82 F = Ft x T x RPM

Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute Ft = Feed Per Tooth T = Number of Teeth D = Cutting Diameter SFM = Surface Feet per Minute

Type of Cut

346

Feed Rate Chart - Solid Carbide End Mills


# of Flutes

Depth/ Width of Cut >0,5 0.6 0.8 1 2 3 4 5 6 8 10 12 14 16 18 20

>4 ↕ 1,5↔ 0,05

A 0.015 0.020 0.025 0.030 0.035 0.040 0.050 0.060

B 0.045 0.050 0.060 0.075 0.080 0.090 0.100 0.110

C 0.065 0.075 0.090 0.110 0.120 0.130 0.150 0.170

3-4 ↕ 1,5↔ 0,1

A 0.010 0.020 0.030 0.040 0.045 0.050 0.060 0.075 0.080 0.090 0.100 0.120

B 0.015 0.030 0.040 0.055 0.065 0.075 0.090 0.110 0.120 0.130 0.150 0.170

C 0.015 0.030 0.040 0.055 0.085 0.100 0.120 0.140 0.150 0.170 0.200 0.220

3-4 ↕ 1↔ 0,5

A 0.001 0.003 0.005 0.008 0.010 0.013 0.020 0.027 0.035 0.040 0.050 0.055 0.060

B 0.002 0.004 0.008 0.012 0.015 0.020 0.030 0.040 0.050 0.060 0.070 0.080 0.090

C 0.003 0.005 0.010 0.015 0.020 0.025 0.040 0.050 0.065 0.080 0.090 0.105 0.120

2-3 ↕ 0,5↔ 1

A 0.001 0.001 0.002 0.002 0.005 0.009 0.013 0.017 0.020 0.023 0.035 0.040 0.050 0.055 0.060 0.070

B 0.001 0.002 0.003 0.003 0.007 0.013 0.020 0.025 0.030 0.035 0.050 0.060 0.070 0.080 0.090 0.100

C 0.002 0.003 0.004 0.004 0.009 0.017 0.025 0.033 0.040 0.045 0.065 0.080 0.090 0.105 0.120 0.130

3-4

↕ 0,5↔ 1

↕ 1

B 0.035 0.040 0.055 0.065 0.080 0.090 0.100 0.110

2&4

↕ 0,1 - 0,5mm

↔ 0,1 - 0,5mm

A 0.010 0.017 0.023 0.028 0.032 0.040 0.050 0.055 0.070 0.080

BC 0.015 0.022 0.030 0.035 0.040 0.050 0.060 0.070 0.085 0.100

4

↕ 0,01 - 0,1

↔ ≤ 1

A 0.040 0.050 0.055 0.065 0.080

BC 0.050 0.060 0.070 0.080 0.100

Feed Per Tooth (Ft) Dia MMAlpha Code

Type of Cut

Easy Calculations: (MM)

RPM = (mm/min x 1000) / 3.14 x Diameter F = mm/min = RPM x feed per tooth x number of teeth

Terms:

RPM = Revolutions Per MM F = Feed MM Per Minute Ft = Feed Per Tooth T = Number of Teeth D = Cutting Diameter SFM = Surface Feet per Minute

347

Feed Rate Chart - Solid Carbide End MillsHow To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code). 2. Find the closest diameter for your cutting application on the chart. 3. Select the type of cut and # Flutes to find your Ft Range.


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Solid Carbide End Mills

Sol

id C

arbi

de E

nd M

ills


Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find Type of Cut and other Product Features.Find the Surface Feet Per Minute (SFM) and Alpha Code. example: 289 B 289 = SFM B = Alpha Code to find your Feed Rate

To calculate Feed Per Tooth, refer to chart on page 346-347.


Style:Flutes:

Finish/Coating:

Axial Direction:Type of Cut:

Tool Length:Shank:

Material:

Tolerance:

Helix Angle:End Grind:

Straight Shank

Helix AngleCarbideSlotting, Ramping

Slotting, Ramping,

Diving

Slotting Ball Nose Roughing Finishing

Icon Guide for Solid Carbide End Mills

348

1

23

4

2

13



E3603 E3603G E3603V

354 354 355

■151B ■161B ■200B

■200A ■249A ■325A■141A ■161A ■226A■112A ■131A ■174A■89A ■105A ■131A

■161B ■184B ■230B■144B ■180B ■200B■131B ■151B ■190B■171B ■184B ■230B■115A ■131A ■161A■66A ■75A ■98A

3-Flute High Helix

3-Flute High Helix

3-Flute High Helix



1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Sol

id C

arbi

de E

nd M

ills

349

Solid Carbide End Mills (con‘t)EB3302V EB3302M EB3302MG

365 366 367■400B ■289B ■325B■298B ■223B ■249B■298B ■223B ■249B■259B ■180B ■200B■230B ■161B ■180B■200B ●148B ●161B

■325A ■200A ■249A■223A ■141A ■161A■174A ■108A ■131A

■89A ■98A■551B ■374B●525B ●318B■525B ■318B●374B ●249B■230B●200B●190B●230B ●184B●161A●98A

■649C■499C■499C●125B●1499C●1499C●649C●400B

2-Flute

2-Flute

2-Flute

E1302 E1302G E1302V E2302 E3302 E3302G E3302V E3302M E3302MG E3302MV EB3302 EB3302G

355 356 356 357 357 358 359 360 361 362 363 364■289B ■325B ■400B ■289B ■289B ■325B ■400B ■289B ■325B ■400B ■289B ■325B■223B ■249B ■298B ■223B ■223B ■249B ■298B ■223B ■249B ■298B ■223B ■249B■223B ■249B ■298B ■223B ■223B ■249B ■298B ■223B ■249B ■298B ■223B ■249B■180B ■200B ■259B ■180B ■180B ■200B ■259B ■180B ■200B ■259B ■180B ■200B■161B ■180B ■230B ■161B ■161B ■180B ■230B ■161B ■180B ■230B ■161B ■180B●148B ●161B ■200B ●148B ●148B ●161B ■200B ●148B ●161B ■200B ●148B ●161B

●200A ■249A ■325A ■200A ●200A ■249A ■325A ●200A ■249A ■325A ■200A ■249A●141A ■161A ■223A ■141A ●141A ■161A ■223A ●141A ■161A ■223A ■141A ■161A●108A ■131A ■174A ■108A ●108A ■131A ■174A ●108A ■131A ■174A ■108A ■131A

■89A ■98A■374B ■551B ■374B ■374B ■551B ■374B ■551B ■374B●318B ●525B ●318B ●318B ●525B ●318B ●525B ●318B■318B ■525B ■318B ■318B ■525B ■318B ■525B ■318B●249B ●374B ●249B ●249B ●374B ●249B ●374B ●249B

■230B ■230B ■230B●200B ●200B ●200B●190B ●190B ●190B

●184B ●230B ●184B ●230B ●184B ●230B ●184B●161A ●161A ●161A●98A ●98A ●98A

■649C ■649C ■649C ■649C■499C ■499C ■499C ■499C■499C ■499C ■499C ■499C●125B ●125B ●125B ●125B ●125B

●1499C ●1499C●1499C ●1499C

●649C ●649C ●649C ●649C●400B ●400B ●400B ●400B ●400B

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Sol

id C

arbi

de E

nd M

ills





Style:Flutes:

Finish/Coating:


Tool Length:Shank:

Material:

Tolerance:


Straight Shank


Slotting, Ramping,

Diving



350

1

23

4

2

13



EB3302MV E4302 EB4302


■325A ■200A ■200A■223A ■141A ■141A■174A ■108A ■108A

■89A■551B ■374B ■374B●525B ●318B ●318B■525B ■318B ■318B●374B ●249B ●249B■230B●200B●190B●230B●161A●98A

■649C ■649C■499C ■499C■499C ■499C●125B ●125B●1499C ●1499C●1499C ●1499C●649C ●649C●400B ●400B

2-Flute

2-Flute

2-Flute



1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Sol

id C

arbi

de E

nd M

ills

351

Solid Carbide End Mills (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

E6302 E6302G E6302V EB6302 EB6302G EB6302V E3303 E3303G E3303V E1304 E1304G

369 370 370 371 371 372 372 373 373 374 374■249B ■289B ■361B ■249B ■289B ■361B ■289B ■325B ■400B ■361B ■400B■200B ■226B ■269B ■200B ■226B ■269B ■223B ■249B ■298B ■325B ■374B■200B ■226B ■269B ■200B ■226B ■269B ■223B ■249B ■298B ■325B ■374B■161B ■180B ■239B ■161B ■180B ■239B ■180B ■200B ■259B ■298B ■341B■144B ■161B ■200B ■144B ■161B ■200B ■161B ■180B ■230B ■249B ■298B●131B ●148B ■180B ●131B ●148B ■180B ●148B ●161B ■200B ●230B ●239B

■180A ●210A ■298A ■180A ●210A ■298A ■200A ■249A ■325A ■239A ■276A■108A ●128A ■180A ■108A ●128A ■180A ■141A ■161A ■223A ■171A ■200A■98A ●118A ■171A ■98A ●118A ■171A ■108A ■131A ■174A ■131A ■151A

■82A ■89A ●98A ●121A■298B ■499B ■298B ■499B ■374B ■551B ■449B●249B ■400B ●249B ■400B ●318B ●525B ●377B■249B ■400B ■249B ■400B ■318B ■525B ■377B●200B ■341B ●200B ■341B ●249B ●374B ●279B

■200B ■200B ■230B●180B ●180B ●200B●174B ●174B ●190B

●164B ■200B ●148B ●164B ■200B ●184B ●230B ●210B●141A ●141A ●161A●85A ●85A ●98A

■584C ■584C ■584C ■584C ■649C ■679C■449C ■449C ■449C ■449C ■499C ■574C■449C ■449C ■449C ■449C ■499C ■574C●108B ●108B ●108B ●108B ●125B ●144B●1348C ●1348C ●1348C ●1348C ●1499C ●1601C●1348C ●1348C ●1348C ●1348C ●1499C ●1601C●584C ●584C ●584C ●584C ●649C ●708C●361B ●361B ●361B ●361B ●400B ●479B

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

2-Flute

3-Flute

3-Flute

3-Flute

4-Flute

4-Flute

E1304V E2304 E3304 E3304G

375 375 376 377■499B ■361B ■361B ■400B■449B ■325B ■325B ■374B■449B ■325B ■325B ■374B■423B ■298B ■298B ■341B■400B ■249B ■249B ■298B■328B ●230B ●230B ●239B

■351A ■239A ■239A ■276A■276A ■171A ■171A ■200A■200A ■131A ■131A ■151A

■105A ■105A■699B ■449B ■449B■649B ●377B ●377B■649B ■377B ■377B■430B ●279B ●279B■259B●230B●200B●266B ●210B●200A●131A

■679C ■679C■574C ■574C■574C ■574C●144B ●144B●1601C ●1601C●1601C ●1601C●708C ●708C●479B ●479B

4-Flute

4-Flute

4-Flute

4-Flute



1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper








Sol

id C

arbi

de E

nd M

ills





Style:Flutes:

Finish/Coating:


Tool Length:Shank:

Material:

Tolerance:


Straight Shank


Slotting, Ramping,

Diving



352

1

23

4

2

13



E3304V E3304M E3304MG


■351A ■239A ■276A■276A ■171A ■200A■200A ■131A ■151A■164A ■105A ■105A■699B ■449B■649B ●377B■649B ■377B■430B ●279B■259B●230B●200B●266B ●210B●200A●131A

■679C■574C■574C●144B●1601C●1601C●708C●479B

4-Flute

4-Flute

4-Flute

Surface Feet per Minute SFM)


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Sol

id C

arbi

de E

nd M

ills

353

Solid Carbide End Mills (con‘t)

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

E3304MV EB3304 EB3304G EB3304V,MV EB3304M EB3304MG E4304 EB4304 E6304 E6304G

381 382 383 384 385 386 386 387 387 388■499B ■361B ■400B ■499B ■361B ■400B ■361B ■361B ■325B ■361B■449B ■325B ■374B ■449B ■325B ■374B ■325B ■325B ■298B ■341B■449B ■325B ■374B ■449B ■325B ■374B ■325B ■325B ■298B ■341B■423B ■298B ■341B ■423B ■298B ■341B ■298B ■298B ■276B ■315B■400B ■249B ■298B ■400B ■249B ■298B ■249B ■249B ■226B ■269B■328B ●230B ●239B ■328B ●230B ●239B ●230B ●230B ●180B ●220B

■351A ■239A ■276A ■351A ■239A ■276A ■239A ■239A ■200A ■239A■276A ■171A ■200A ■276A ■171A ■200A ■171A ■171A ■141A ■161A■200A ■131A ■151A ■200A ■131A ■151A ■131A ■131A ■115A ■131A■164A ■98A ■115A ■148A ■98A ■115A ■105A ■89A ■89A ■89A■699B ■449B ■699B ■449B ■449B ■449B ■361B■649B ●377B ■649B ●377B ●377B ●377B ●298B■649B ■377B ■649B ■377B ■377B ■377B ■298B■430B ●279B ■430B ●279B ●279B ●279B ●230B ●200B■259B ■259B●230B ●230B●200B ●200B●266B ●210B ●266B ●210B ●187B●200A ●200A●131A ●131A

■679C ■679C ■679C ■679C ■613C■574C ■574C ■574C ■574C ■518C■574C ■574C ■574C ■574C ■518C●144B ●144B ●144B ●144B ●131B●1601C ●1601C ●1601C ●1601C●1601C ●1601C ●1601C ●1601C●708C ●708C ●708C ●708C ●640C●479B ●479B ●479B ●479B ●430B

4-Flute

4-Flute

4-Flute

4-Flute

4-Flute

4-Flute

4-Flute

4-Flute

4-Flute

4-Flute

E6304V EB6304 EB6304G EB6304V RTDA

388 389 389 390 390■449B ■325B ■361B ■400B■400B ■298B ■341B ■374B■400B ■298B ■341B ■374B ■279U■390B ■276B ■315B ■351B ■230U■361B ■226B ■269B ■325B ■230U■298B ●180B ●220B ●249B ■164T

■148S■131S

■325A ■200A ■239A ■226A■226A ■141A ■161A ■190A■164A ■115A ■131A ■151A■115A ■105A ■121A■600B ■361B ■499B ●246V■508B ●298B ■430B ●246V■508B ■298B ■430B ●180V■400B ●230B ●338B ●180V●230B ●200B ●131T●210B ●190B ●131T●180B ●82T●236B ●210B●180A ●72T●115A ●46S

■613C ●699C■518C ●571C■518C ●571C●131B ●180B ■230W●1450C ■1650C●1450C ■1650C ●656X●640C ■708C ■367X●430B ■410B ■197X

■105U

4-Flute

4-Flute

4-Flute

4-Flute


4-Flute

3-Flute


E3603

E3603

■

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 5/8 1.1/2 3 0058023/16 0.1875 3/16 5/8 2“ 3 0058041/4 0.2500 1/4 3/4 2.1/2 3 0058075/16 0.3125 5/16 13/16 2.1/2 3 0058083/8 0.3750 3/8 1“ 2.1/2 3 0058107/16 0.4375 7/16 1“ 3“ 3 0058121/2 0.5000 1/2 1“ 3“ 3 0058145/8 0.6250 5/8 1.1/4 3.1/2 3 0058153/4 0.7500 3/4 1.1/2 4“ 3 0058171“ 1.0000 1 1.1/2 4“ 3 005820

E3603G

■

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1/2 1.1/2 3 0059023/16 0.1875 3/16 5/8 2“ 3 0059041/4 0.2500 1/4 3/4 2.1/2 3 0059075/16 0.3125 5/16 13/16 2.1/2 3 0059083/8 0.3750 3/8 1“ 2.1/2 3 0059107/16 0.4375 7/16 1“ 3“ 3 0059121/2 0.5000 1/2 1“ 3“ 3 0059145/8 0.6250 5/8 1.1/4 3.1/2 3 0059153/4 0.7500 3/4 1.1/2 4“ 3 0059171“ 1.0000 1 1.1/2 4“ 3 005920

E3603G

● End Mill ● Fraises de finition ● Fresas de acabado● 3-flute, 60° high helix


E3603V

E3603V

■

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1/2 1.1/2 3 0027803/16 0.1875 3/16 5/8 2“ 3 0027811/4 0.2500 1/4 3/4 2.1/2 3 0027825/16 0.3125 5/16 13/16 2.1/2 3 0027833/8 0.3750 3/8 1“ 2.1/2 3 0027847/16 0.4375 7/16 1“ 3“ 3 0027851/2 0.5000 1/2 1“ 3“ 3 0027865/8 0.6250 5/8 1.1/4 3.1/2 3 0027873/4 0.7500 3/4 1.1/2 4“ 3 0027881“ 1.0000 1 1.1/2 4“ 3 002789

E1302

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 2 0018023/32 0.0938 1/8 3/16 1.1/2 2 0018041/8 0.1250 1/8 1/4 1.1/2 2 0018065/32 0.1562 3/16 5/16 2“ 2 0018083/16 0.1875 3/16 3/8 2“ 2 0018107/32 0.2188 1/4 7/16 2“ 2 0018111/4 0.2500 1/4 1/2 2“ 2 0018125/16 0.3125 5/16 1/2 2“ 2 0018133/8 0.3750 3/8 5/8 2“ 2 0018147/16 0.4375 7/16 5/8 3“ 2 0018151/2 0.5000 1/2 5/8 2.1/2 2 001816

E1302

● 3-flute, 60° high helix

● 2-flute, stub length

● End Mill● Fraises de finition ● Fresas de acabado

● End Mill ● Fraises de finition ● Fresas de acabado


E1302G

E1302G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 2 0068023/32 0.0938 1/8 3/16 1.1/2 2 0068041/8 0.1250 1/8 1/4 1.1/2 2 0068065/32 0.1562 3/16 5/16 2“ 2 0068083/16 0.1875 3/16 3/8 2“ 2 0068107/32 0.2188 1/4 7/16 2“ 2 0068111/4 0.2500 1/4 1/2 2“ 2 0068125/16 0.3125 5/16 1/2 2“ 2 0068133/8 0.3750 3/8 5/8 2“ 2 0068147/16 0.4375 7/16 5/8 3“ 2 0068151/2 0.5000 1/2 5/8 2.1/2 2 006816

E1302V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 2 0027353/32 0.0938 1/8 3/16 1.1/2 2 0027361/8 0.1250 1/8 1/4 1.1/2 2 0027375/32 0.1562 3/16 5/16 2“ 2 0027383/16 0.1875 3/16 3/8 2“ 2 0027397/32 0.2188 1/4 7/16 2“ 2 0027401/4 0.2500 1/4 1/2 2“ 2 0027415/16 0.3125 5/16 1/2 2“ 2 0027423/8 0.3750 3/8 5/8 2“ 2 0027437/16 0.4375 7/16 5/8 3“ 2 0027441/2 0.5000 1/2 5/8 2.1/2 2 002745

E1302V

● 2-flute, stub length● End Mill ● Fraises de finition ● Fresas de acabado


E2302 - E3302

E2302

■ ●d1Ø Inch

d1 decimalInch

d2Ø Inch

l2Inch

l1Inch # Flutes

EDP # ore-Code

1/16 0.0625 1/8 1/8 1.1/2 2 0020023/32 0.0938 1/8 3/16 1.1/2 2 0020031/8 0.1250 1/8 1/4 1.1/2 2 0020043/16 0.1875 3/16 3/8 2“ 2 0020061/4 0.2500 1/4 1/2 2.1/2 2 0020085/16 0.3125 5/16 1/2 2.1/2 2 0020093/8 0.3750 3/8 1/2 2.1/2 2 0020101/2 0.5000 1/2 5/8 3“ 2 002012


● Fraises de finition

● Fraises de finition - Double● End Mill, double-end ● Fresas de acabado - Doble final

E3302

■ ●

d1Ø Inch

d1 decimalInch

d2Ø Inch

l2Inch

l1Inch # Flutes

EDP # ore-Code

1/16 0.0625 1/8 1/4 1.1/2 2 0010005/64 0.0781 1/8 1/4 1.1/2 2 0010013/32 0.0938 1/8 3/8 1.1/2 2 0010027/64 0.1094 1/8 3/8 1.1/2 2 0010031/8 0.1250 1/8 1/2 1.1/2 2 0010049/64 0.1406 3/16 9/16 2“ 2 0010055/32 0.1562 3/16 9/16 2“ 2 00100611/64 0.1719 3/16 9/16 2“ 2 0010073/16 0.1875 3/16 5/8 2“ 2 00100813/64 0.2031 1/4 5/8 2.1/2 2 0010097/32 0.2188 1/4 5/8 2.1/2 2 00101015/64 0.2344 1/4 3/4 2.1/2 2 0010111/4 0.2500 1/4 3/4 2.1/2 2 0010125/16 0.3125 5/16 7/8 2.1/2 2 0010163/8 0.3750 3/8 7/8 2.1/2 2 0010177/16 0.4375 7/16 1“ 2.1/2 2 0010181/2 0.5000 1/2 1“ 3“ 2 0010199/16 0.5625 9/16 1.1/4 3.1/2 2 0010205/8 0.6250 5/8 1.1/4 3.1/2 2 00102111/16 0.6875 3/4 1.1/2 4“ 2 0010223/4 0.7500 3/4 1.1/2 4“ 2 0010237/8 0.8750 7/8 1.1/2 4“ 2 0010241“ 1.0000 1“ 1.1/2 4“ 2 001025

● 2-flute, regular length● End Mill ● Fresas de acabado


E3302G

E3302G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 2 0051005/64 0.0781 1/8 1/4 1.1/2 2 0051013/32 0.0938 1/8 3/8 1.1/2 2 0051027/64 0.1094 1/8 3/8 1.1/2 2 0051031/8 0.1250 1/8 1/2 1.1/2 2 0051049/64 0.1406 3/16 9/16 2“ 2 0051055/32 0.1562 3/16 9/16 2“ 2 00510611/64 0.1719 3/16 9/16 2“ 2 0051073/16 0.1875 3/16 5/8 2“ 2 00510813/64 0.2031 1/4 5/8 2.1/2 2 0051097/32 0.2188 1/4 5/8 2.1/2 2 00511015/64 0.2344 1/4 3/4 2.1/2 2 0051111/4 0.2500 1/4 3/4 2.1/2 2 0051125/16 0.3125 5/16 7/8 2.1/2 2 0051163/8 0.3750 3/8 7/8 2.1/2 2 0051177/16 0.4375 7/16 1“ 2.1/2 2 0051181/2 0.5000 1/2 1“ 3“ 2 0051199/16 0.5625 9/16 1.1/4 3.1/2 2 0051205/8 0.6250 5/8 1.1/4 3.1/2 2 00512111/16 0.6875 3/4 1.1/2 4“ 2 0051223/4 0.7500 3/4 1.1/2 4“ 2 0051237/8 0.8750 7/8 1.1/2 4“ 2 0051241“ 1.0000 1“ 1.1/2 4“ 2 005125

● 2-flute, regular length● End Mill ● Fraises de finition ● Fresas de acabado


E3302V

E3302V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 2 0028505/64 0.0781 1/8 1/4 1.1/2 2 0028513/32 0.0938 1/8 3/8 1.1/2 2 0028527/64 0.1094 1/8 3/8 1.1/2 2 0028531/8 0.1250 1/8 1/2 1.1/2 2 0028549/64 0.1406 3/16 9/16 2“ 2 0028555/32 0.1562 3/16 9/16 2“ 2 00285611/64 0.1719 3/16 9/16 2“ 2 0028573/16 0.1875 3/16 5/8 2“ 2 00285813/64 0.2031 1/4 5/8 2.1/2 2 0028597/32 0.2188 1/4 5/8 2.1/2 2 00286015/64 0.2344 1/4 3/4 2.1/2 2 0028611/4 0.2500 1/4 3/4 2.1/2 2 0028625/16 0.3125 5/16 7/8 2.1/2 2 0028633/8 0.3750 3/8 7/8 2.1/2 2 0028647/16 0.4375 7/16 1“ 2.1/2 2 0028651/2 0.5000 1/2 1“ 3“ 2 0028669/16 0.5625 9/16 1.1/4 3.1/2 2 0028675/8 0.6250 5/8 1.1/4 3.1/2 2 00286811/16 0.6875 3/4 1.1/2 4“ 2 0028693/4 0.7500 3/4 1.1/2 4“ 2 0028707/8 0.8750 7/8 1.1/2 4“ 2 0028711“ 1.0000 1“ 1.1/2 4“ 2 002872



E3302M

E3302M

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 2 0010282.50 0.0984 3.0 6.0 38.0 2 0010293.00 0.1181 3.0 12.0 38.0 2 0010303.50 0.1378 4.0 14.0 50.0 2 0010314.00 0.1575 4.0 14.0 50.0 2 0010324.50 0.1772 5.0 14.0 50.0 2 0010335.00 0.1969 5.0 16.0 50.0 2 0010346.00 0.2362 6.0 19.0 63.0 2 0010357.00 0.2756 8.0 19.0 63.0 2 0010368.00 0.3150 8.0 19.0 63.0 2 0010379.00 0.3543 10.0 22.0 70.0 2 00103810.00 0.3937 10.0 22.0 70.0 2 00103911.00 0.4331 11.0 25.0 70.0 2 00104012.00 0.4724 12.0 25.0 75.0 2 00104114.00 0.5512 14.0 30.0 88.0 2 00104316.00 0.6299 16.0 32.0 88.0 2 00104418.00 0.7087 18.0 36.0 100.0 2 00104520.00 0.7874 20.0 38.0 100.0 2 00104625.00 0.9843 25.0 38.0 100.0 2 001047



E3302MG

E3302MG

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 2 0051282.50 0.0984 3.0 6.0 38.0 2 0051293.00 0.1181 3.0 12.0 38.0 2 0051303.50 0.1378 4.0 14.0 50.0 2 0051314.00 0.1575 4.0 14.0 50.0 2 0051324.50 0.1772 5.0 14.0 50.0 2 0051335.00 0.1969 5.0 16.0 50.0 2 0051346.00 0.2362 6.0 19.0 63.0 2 0051357.00 0.2756 8.0 19.0 63.0 2 0051368.00 0.3150 8.0 19.0 63.0 2 0051379.00 0.3543 10.0 22.0 70.0 2 00513810.00 0.3937 10.0 22.0 70.0 2 00513911.00 0.4331 11.0 25.0 70.0 2 00514012.00 0.4724 12.0 25.0 75.0 2 00514114.00 0.5512 14.0 30.0 88.0 2 00514316.00 0.6299 16.0 32.0 88.0 2 00514418.00 0.7087 18.0 36.0 100.0 2 00514520.00 0.7874 20.0 38.0 100.0 2 00514625.00 0.9843 25.0 38.0 100.0 2 005147

● 2-flute, regular length● Fraises de finition ● Fresas de acabado● End Mill


E3302MV

E3302MV

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 2 0042752.50 0.0984 3.0 6.0 38.0 2 0042763.00 0.1181 3.0 12.0 38.0 2 0042773.50 0.1378 4.0 14.0 50.0 2 0042784.00 0.1575 4.0 14.0 50.0 2 0042794.50 0.1772 5.0 14.0 50.0 2 0042805.00 0.1969 5.0 16.0 50.0 2 0042816.00 0.2362 6.0 19.0 63.0 2 0042827.008.009.00

0.27560.31500.3543

8.08.010.0

19.020.022.0

63.063.073.0

222

004283004284004285

10.00 0.3937 10.0 22.0 70.0 2 00428611.00 0.4331 11.0 25.0 70.0 2 00428712.00 0.4724 12.0 25.0 75.0 2 00428814.00 0.5512 14.0 30.0 88.0 2 00428916.00 0.6299 16.0 32.0 88.0 2 00429018.00 0.7087 18.0 36.0 100.0 2 00429120.00 0.7874 20.0 38.0 100.0 2 00429225.00 0.9843 25.0 38.0 100.0 2 004293



EB3302

EB3302

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 2 0012005/64 0.0781 1/8 1/4 1.1/2 2 0012013/32 0.0938 1/8 3/8 1.1/2 2 0012027/64 0.1094 1/8 3/8 1.1/2 2 0012031/8 0.1250 1/8 1/2 1.1/2 2 0012049/64 0.1406 3/16 9/16 2“ 2 0012055/32 0.1562 3/16 9/16 2“ 2 00120611/64 0.1719 3/16 9/16 2“ 2 0012073/16 0.1875 3/16 5/8 2“ 2 00120813/64 0.2031 1/4 5/8 2.1/2 2 0012097/32 0.2188 1/4 5/8 2.1/2 2 00121015/64 0.2344 1/4 3/4 2.1/2 2 0012111/4 0.2500 1/4 3/4 2.1/2 2 0012125/16 0.3125 5/16 7/8 2.1/2 2 0012163/8 0.3750 3/8 7/8 2.1/2 2 0012177/16 0.4375 7/16 1“ 2.1/2 2 0012181/2 0.5000 1/2 1“ 3“ 2 0012199/16 0.5625 9/16 1.1/4 3.1/2 2 0012205/8 0.6250 5/8 1.1/4 3.1/2 2 00122111/16 0.6875 3/4 1.1/2 4“ 2 0012223/4 0.7500 3/4 1.1/2 4“ 2 0012237/8 0.8750 7/8 1.1/2 4“ 2 0012241“ 1.0000 1“ 1.1/2 4“ 2 001225

● 2-flute, ball nose, regular length ● End Mill ● Fraises de finition bout hémisphérique ● Fresas con punta esferica


EB3302G

EB3302G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 2 0025705/64 0.0781 1/8 1/4 1.1/2 2 0025713/32 0.0938 1/8 3/8 1.1/2 2 0025727/64 0.1094 1/8 3/8 1.1/2 2 0025731/8 0.1250 1/8 1/2 1.1/2 2 0025749/64 0.1406 3/16 9/16 2“ 2 0025755/32 0.1562 3/16 9/16 2“ 2 00257611/64 0.1719 3/16 9/16 2“ 2 0025773/16 0.1875 3/16 5/8 2“ 2 00257813/64 0.2031 1/4 5/8 2.1/2 2 0025797/32 0.2188 1/4 5/8 2.1/2 2 00258015/64 0.2344 1/4 3/4 2.1/2 2 0025811/4 0.2500 1/4 3/4 2.1/2 2 0025825/16 0.3125 5/16 7/8 2.1/2 2 0025833/8 0.3750 3/8 7/8 2.1/2 2 0025847/16 0.4375 7/16 1“ 2.1/2 2 0025851/2 0.5000 1/2 1“ 3“ 2 0025869/16 0.5625 9/16 1.1/4 3.1/2 2 0025875/8 0.6250 5/8 1.1/4 3.1/2 2 00258811/16 0.6875 3/4 1.1/2 4“ 2 0025893/4 0.7500 3/4 1.1/2 4“ 2 0025907/8 0.8750 7/8 1.1/2 4“ 2 0025911“ 1.0000 1“ 1.1/2 4“ 2 002592

● End Mill ● Fraises de finition bout hémisphérique ● Fresas con punta esferica● 2-flute, ball nose, regular length


EB3302V

EB3302V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 2 0026305/64 0.0781 1/8 1/4 1.1/2 2 0026313/32 0.0938 1/8 3/8 1.1/2 2 0026327/64 0.1094 1/8 3/8 1.1/2 2 0026331/8 0.1250 1/8 1/2 1.1/2 2 0026349/64 0.1406 3/16 9/16 2“ 2 0026355/32 0.1562 3/16 9/16 2“ 2 00263611/64 0.1719 3/16 9/16 2“ 2 0026373/16 0.1875 3/16 5/8 2“ 2 00263813/64 0.2031 1/4 5/8 2.1/2 2 0026397/32 0.2188 1/4 5/8 2.1/2 2 00264015/64 0.2344 1/4 3/4 2.1/2 2 0026411/4 0.2500 1/4 3/4 2.1/2 2 0026425/16 0.3125 5/16 7/8 2.1/2 2 0026433/8 0.3750 3/8 7/8 2.1/2 2 0026447/16 0.4375 7/16 1“ 2.1/2 2 0026451/2 0.5000 1/2 1“ 3“ 2 0026469/16 0.5625 9/16 1.1/4 3.1/2 2 0026475/8 0.6250 5/8 1.1/4 3.1/2 2 00264811/16 0.6875 3/4 1.1/2 4“ 2 0026493/4 0.7500 3/4 1.1/2 4“ 2 0026507/8 0.8750 7/8 1.1/2 4“ 2 0026511“ 1.0000 1“ 1.1/2 4“ 2 002652



EB3302M

EB3302M

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 2 0012282.50 0.0984 3.0 7.0 38.0 2 0012293.00 0.1181 3.0 12.0 38.0 2 0012303.50 0.1378 4.0 12.0 50.0 2 0012314.00 0.1575 4.0 14.0 50.0 2 0012324.50 0.1772 5.0 14.0 50.0 2 0012335.00 0.1969 5.0 16.0 50.0 2 0012346.00 0.2362 6.0 19.0 63.0 2 0012357.00 0.2756 8.0 19.0 63.0 2 0012368.00 0.3150 8.0 19.0 63.0 2 0012379.00 0.3543 10.0 22.0 70.0 2 00123810.00 0.3937 10.0 22.0 70.0 2 00123911.00 0.4331 11.0 25.0 70.0 2 00124012.00 0.4724 12.0 25.0 75.0 2 00124114.00 0.5512 14.0 30.0 88.0 2 00124216.00 0.6299 16.0 32.0 88.0 2 00124318.00 0.7087 18.0 36.0 100.0 2 00124420.00 0.7874 20.0 38.0 100.0 2 00124525.00 0.9843 25.0 38.0 100.0 2 001246



EB3302MG

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 2 0043502.50 0.0984 3.0 7.0 38.0 2 0043513.00 0.1181 3.0 12.0 38.0 2 0043523.50 0.1378 4.0 12.0 50.0 2 0043534.00 0.1575 4.0 14.0 50.0 2 0043544.50 0.1772 5.0 14.0 50.0 2 0043555.00 0.1969 5.0 16.0 50.0 2 0043566.00 0.2362 6.0 19.0 63.0 2 0043577.00 0.2756 8.0 19.0 63.0 2 0043588.00 0.3150 8.0 19.0 63.0 2 0043599.00 0.3543 10.0 22.0 70.0 2 00436010.00 0.3937 10.0 22.0 70.0 2 00436111.00 0.4331 11.0 25.0 70.0 2 00436212.00 0.4724 12.0 25.0 75.0 2 00436314.00 0.5512 14.0 30.0 88.0 2 00436416.00 0.6299 16.0 32.0 88.0 2 00436518.00 0.7087 18.0 36.0 100.0 2 00436620.00 0.7874 20.0 38.0 100.0 2 00436725.00 0.9843 25.0 38.0 100.0 2 004368

● 2-flute, ball nose, regular length

EB3302MG

● End Mill ● Fraises de finition bout hémisphérique ● Fresas con punta esferica


EB3302MV - E4302

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 2 0044002.50 0.0984 3.0 7.0 38.0 2 0044013.00 0.1181 3.0 12.0 38.0 2 0044023.50 0.1378 4.0 12.0 50.0 2 0044034.00 0.1575 4.0 14.0 50.0 2 0044044.50 0.1772 5.0 14.0 50.0 2 0044055.00 0.1969 5.0 16.0 50.0 2 0044066.00 0.2362 6.0 19.0 63.0 2 0044077.00 0.2756 8.0 19.0 63.0 2 0044088.00 0.3150 8.0 19.0 63.0 2 0044099.00 0.3543 10.0 22.0 70.0 2 00441010.00 0.3937 10.0 22.0 70.0 2 00441111.00 0.4331 11.0 25.0 70.0 2 00441212.00 0.4724 12.0 25.0 75.0 2 00441314.00 0.5512 14.0 30.0 88.0 2 00441416.00 0.6299 16.0 32.0 88.0 2 00441518.00 0.7087 18.0 36.0 100.0 2 00441620.00 0.7874 20.0 38.0 100.0 2 00441725.00 0.9843 25.0 38.0 100.0 2 004418

E4302

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3/8 3“ 2 0022005/32 0.1562 3/8 7/16 3“ 2 0022013/16 0.1875 3/8 1/2 3“ 2 0022027/32 0.2188 3/8 9/16 3“ 2 0022031/4 0.2500 3/8 5/8 3“ 2 0022045/16 0.3125 3/8 3/4 3.1/2 2 0022063/8 0.3750 3/8 3/4 3.1/2 2 0022087/16 0.4375 7/16 7/8 4“ 2 0022091/2 0.5000 1/2 1“ 4“ 2 002210


● 2-flute, double end, regular length

EB3302MV

● Fraises de finition bout hémisphérique● End Mill ● Fresas con punta esferica

● End Mill ● Fraises de finition - Double ● Fresas de acabado - Doble final


EB4302

EB4302

■●d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3/8 3“ 2 0023005/32 0.1562 3/8 7/16 3“ 2 0023013/16 0.1875 3/8 1/2 3“ 2 0023027/32 0.2188 3/8 9/16 3“ 2 0023031/4 0.2500 3/8 5/8 3“ 2 0023045/16 0.3125 3/8 3/4 3.1/2 2 0023063/8 0.3750 3/8 3/4 3.1/2 2 0023087/16 0.4375 7/16 7/8 4“ 2 0023091/2 0.5000 1/2 1“ 4“ 2 002310

E6302

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 2 0048003/16 0.1875 3/16 1.1/8 3“ 2 0048011/4 0.2500 1/4 1.1/2 4“ 2 0048025/16 0.3125 5/16 1.5/8 4“ 2 0048033/8 0.3750 3/8 1.3/4 4“ 2 0048047/16 0.4375 7/16 3“ 6“ 2 0048051/2 0.5000 1/2 3“ 6“ 2 0048065/8 0.6250 5/8 3“ 6“ 2 0048073/4 0.7500 3/4 3“ 6“ 2 0048081“ 1.0000 1 3“ 6“ 2 004809

● 2-flute, ball nose, double end, regular length

● 2-Flute, Extra Length

● End Mill ● Fraises de finition bout hémisphérique - Double

● Fresas con punta esferica - Doble final


E6302


E6302G - E6302V

E6302G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 2 0031003/16 0.1875 3/16 1.1/8 3“ 2 0031011/4 0.2500 1/4 1.1/2 4“ 2 0031025/16 0.3125 5/16 1.5/8 4“ 2 0031033/8 0.3750 3/8 1.3/4 4“ 2 0031047/16 0.4375 7/16 3“ 6“ 2 0031051/2 0.5000 1/2 3“ 6“ 2 0031065/8 0.6250 5/8 3“ 6“ 2 0031073/4 0.7500 3/4 3“ 6“ 2 0031081“ 1.0000 1 3“ 6“ 2 003109

E6302V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 2 0031303/16 0.1875 3/16 1.1/8 3“ 2 0031311/4 0.2500 1/4 1.1/2 4“ 2 0031325/16 0.3125 5/16 1.5/8 4“ 2 0031333/8 0.3750 3/8 1.3/4 4“ 2 0031347/16 0.4375 7/16 3“ 6“ 2 0031351/2 0.5000 1/2 3“ 6“ 2 0031365/8 0.6250 5/8 3“ 6“ 2 0031373/4 0.7500 3/4 3“ 6“ 2 0031381“ 1.0000 1 3“ 6“ 2 003139

● 2-flute, extra length● End Mill ● Fraises de finition ● Fresas de acabado


EB6302

EB6302

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 2 0054003/16 0.1875 3/16 1.1/8 3“ 2 0054011/4 0.2500 1/4 1.1/2 4“ 2 0054025/16 0.3125 5/16 1.5/8 4“ 2 0054033/8 0.3750 3/8 1.3/4 4“ 2 0054047/16 0.4375 7/16 3“ 6“ 2 0054051/2 0.5000 1/2 3“ 6“ 2 0054065/8 0.6250 5/8 3“ 6“ 2 0054073/4 0.7500 3/4 3“ 6“ 2 0054081“ 1.0000 1 3“ 6“ 2 005409

EB6302G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 2 0036703/16 0.1875 3/16 1.1/8 3“ 2 0036711/4 0.2500 1/4 1.1/2 4“ 2 0036725/16 0.3125 5/16 1.5/8 4“ 2 0036733/8 0.3750 3/8 1.3/4 4“ 2 0036747/16 0.4375 7/16 3“ 6“ 2 0036751/2 0.5000 1/2 3“ 6“ 2 0036765/8 0.6250 5/8 3“ 6“ 2 0036773/4 0.7500 3/4 3“ 6“ 2 0036781“ 1.0000 1 3“ 6“ 2 003679

EB6302G

● End Mill, ● Fraises de finition bout hémisphérique ● Fresas con punta esferica● 2-flute, ball nose, extra length


● Fraises de finition● 3-flute, standard length

EB6302V

EB6302V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 2 0037003/16 0.1875 3/16 1.1/8 3“ 2 0037011/4 0.2500 1/4 1.1/2 4“ 2 0037025/16 0.3125 5/16 1.5/8 4“ 2 0037033/8 0.3750 3/8 1.3/4 4“ 2 0037047/16 0.4375 7/16 3“ 6“ 2 0037051/2 0.5000 1/2 3“ 6“ 2 0037065/8 0.6250 5/8 3“ 6“ 2 0037073/4 0.7500 3/4 3“ 6“ 2 0037081“ 1.0000 1 3“ 6“ 2 003709

E3303

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 3 0010503/32 0.0938 1/8 3/8 1.1/2 3 0010521/8 0.1250 1/8 1/2 1.1/2 3 0010545/32 0.1562 3/16 9/16 2“ 3 0010563/16 0.1875 3/16 5/8 2“ 3 0010587/32 0.2188 1/4 5/8 2.1/2 3 0010601/4 0.2500 1/4 3/4 2.1/2 3 0010625/16 0.3125 5/16 7/8 2.1/2 3 0010663/8 0.3750 3/8 7/8 2.1/2 3 0010677/16 0.4375 7/16 1“ 2.1/2 3 0010681/2 0.5000 1/2 1“ 3“ 3 001069

● End Mill ● Fresas de acabado


E3303

● 2-flute, ball nose, extra length


E3303G

E3303G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 3 0028803/32 0.0938 1/8 3/8 1.1/2 3 0028811/8 0.1250 1/8 1/2 1.1/2 3 0028825/32 0.1562 3/16 9/16 2“ 3 0028833/16 0.1875 3/16 5/8 2“ 3 0028847/32 0.2188 1/4 5/8 2.1/2 3 0028851/4 0.2500 1/4 3/4 2.1/2 3 0028865/16 0.3125 5/16 7/8 2.1/2 3 0028873/8 0.3750 3/8 7/8 2.1/2 3 0028887/16 0.4375 7/16 1“ 2.1/2 3 0028891/2 0.5000 1/2 1“ 3“ 3 002890

E3303V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 3 0029203/32 0.0938 1/8 3/8 1.1/2 3 0029211/8 0.1250 1/8 1/2 1.1/2 3 0029225/32 0.1562 3/16 9/16 2“ 3 0029233/16 0.1875 3/16 5/8 2“ 3 0029247/32 0.2188 1/4 5/8 2.1/2 3 0029251/4 0.2500 1/4 3/4 2.1/2 3 0029265/16 0.3125 5/16 7/8 2.1/2 3 0029273/8 0.3750 3/8 7/8 2.1/2 3 0029287/16 0.4375 7/16 1“ 2.1/2 3 0029291/2 0.5000 1/2 1“ 3“ 3 002930

E3303V



E1304

E1304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 4 0018523/32 0.0938 1/8 3/16 1.1/2 4 0018541/8 0.1250 1/8 1/4 1.1/2 4 0018565/32 0.1562 3/16 5/16 2“ 4 0018583/16 0.1875 3/16 3/8 2“ 4 0018607/32 0.2188 1/4 7/16 2“ 4 0018611/4 0.2500 1/4 1/2 2“ 4 0018625/16 0.3125 5/16 1/2 2“ 4 0018633/8 0.3750 3/8 5/8 2“ 4 0018647/16 0.4375 7/16 5/8 3“ 4 0018651/2 0.5000 1/2 5/8 2.1/2 4 001866

E1304G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 4 0068523/32 0.0938 1/8 3/16 1.1/2 4 0068541/8 0.1250 1/8 1/4 1.1/2 4 0068565/32 0.1562 3/16 5/16 2“ 4 0068583/16 0.1875 3/16 3/8 2“ 4 0068607/32 0.2188 1/4 7/16 2“ 4 0068611/4 0.2500 1/4 1/2 2“ 4 0068625/16 0.3125 5/16 1/2 2“ 4 0068633/8 0.3750 3/8 5/8 2“ 4 0068647/16 0.4375 7/16 5/8 3“ 4 0068651/2 0.5000 1/2 5/8 2.1/2 4 006866

E1304G

● 4-flute, stub length● End Mill ● Fraises definition ● Fresas de acabado


E1304V

E1304V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 4 0027653/32 0.0938 1/8 3/16 1.1/2 4 0027661/8 0.1250 1/8 1/4 1.1/2 4 0027675/32 0.1562 3/16 5/16 2“ 4 0027683/16 0.1875 3/16 3/8 2“ 4 0027697/32 0.2188 1/4 7/16 2“ 4 0027701/4 0.2500 1/4 1/2 2“ 4 0027715/16 0.3125 5/16 1/2 2“ 4 0027723/8 0.3750 3/8 5/8 2“ 4 0027737/16 0.4375 7/16 5/8 3“ 4 0027741/2 0.5000 1/2 5/8 2.1/2 4 002775

E2304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/8 1.1/2 4 0020523/32 0.0938 1/8 3/16 1.1/2 4 0020531/8 0.1250 1/8 1/4 1.1/2 4 0020543/16 0.1875 3/16 3/8 2“ 4 0020561/4 0.2500 1/4 1/2 2.1/2 4 0020585/16 0.3125 5/16 1/2 2.1/2 4 0020593/8 0.3750 3/8 1/2 2.1/2 4 0020601/2 0.5000 1/2 5/8 3“ 4 002062

E2304● 4-flute, double end, stub length

● Fraises de finition - Double ● Fresas de acabado - Doble final



● End Mill


E3304

E3304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 4 0011005/64 0.0781 1/8 1/4 1.1/2 4 0011013/32 0.0938 1/8 3/8 1.1/2 4 0011027/64 0.1094 1/8 3/8 1.1/2 4 0011031/8 0.1250 1/8 1/2 1.1/2 4 0011049/64 0.1406 3/16 9/16 2“ 4 0011055/32 0.1562 3/16 9/16 2“ 4 00110611/64 0.1719 3/16 9/16 2“ 4 0011073/16 0.1875 3/16 5/8 2“ 4 00110813/64 0.2031 1/4 5/8 2.1/2 4 0011097/32 0.2188 1/4 5/8 2.1/2 4 00111015/64 0.2344 1/4 3/4 2.1/2 4 0011111/4 0.2500 1/4 3/4 2.1/2 4 0011125/16 0.3125 5/16 7/8 2.1/2 4 0011163/8 0.3750 3/8 7/8 2.1/2 4 0011177/16 0.4375 7/16 1“ 2.1/2 4 0011181/2 0.5000 1/2 1“ 3“ 4 0011199/16 0.5625 9/16 1.1/4 3.1/2 4 0011205/8 0.6250 5/8 1.1/4 3.1/2 4 00112111/16 0.6875 3/4 1.1/2 4“ 4 0011223/4 0.7500 3/4 1.1/2 4“ 4 0011237/8 0.8750 7/8 1.1/2 4“ 4 0011241“ 1.0000 1“ 1.1/2 4“ 4 001125

● End Mill ● Fraises de finition ● Fresas de acabado● 4-flute, regular length


E3304G

E3304G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 4 0053005/64 0.0781 1/8 1/4 1.1/2 4 0053013/32 0.0938 1/8 3/8 1.1/2 4 0053027/64 0.1094 1/8 3/8 1.1/2 4 0053031/8 0.1250 1/8 1/2 1.1/2 4 0053049/64 0.1406 3/16 9/16 2“ 4 0053055/32 0.1562 3/16 9/16 2“ 4 00530611/64 0.1719 3/16 9/16 2“ 4 0053073/16 0.1875 3/16 5/8 2“ 4 00530813/64 0.2031 1/4 5/8 2.1/2 4 0053097/32 0.2188 1/4 5/8 2.1/2 4 00531015/64 0.2344 1/4 3/4 2.1/2 4 0053111/4 0.2500 1/4 3/4 2.1/2 4 0053125/16 0.3125 5/16 7/8 2.1/2 4 0053163/8 0.3750 3/8 7/8 2.1/2 4 0053177/16 0.4375 7/16 1“ 2.1/2 4 0053181/2 0.5000 1/2 1“ 3“ 4 0053199/16 0.5625 9/16 1.1/4 3.1/2 4 0053205/8 0.6250 5/8 1.1/4 3.1/2 4 00532111/16 0.6875 3/4 1.1/2 4“ 4 0053223/4 0.7500 3/4 1.1/2 4“ 4 0053237/8 0.8750 7/8 1.1/2 4“ 4 0053241“ 1.0000 1“ 1.1/2 4“ 4 005325



E3304V

E3304V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 4 0026905/64 0.0781 1/8 1/4 1.1/2 4 0026913/32 0.0938 1/8 3/8 1.1/2 4 0026927/64 0.1094 1/8 3/8 1.1/2 4 0026931/8 0.1250 1/8 1/2 1.1/2 4 0026949/64 0.1406 3/16 9/16 2“ 4 0026955/32 0.1562 3/16 9/16 2“ 4 00269611/64 0.1719 3/16 9/16 2“ 4 0026973/16 0.1875 3/16 5/8 2“ 4 00269813/64 0.2031 1/4 5/8 2.1/2 4 0026997/32 0.2188 1/4 5/8 2.1/2 4 00270015/64 0.2344 1/4 3/4 2.1/2 4 0027011/4 0.2500 1/4 3/4 2.1/2 4 0027025/16 0.3125 5/16 7/8 2.1/2 4 0027033/8 0.3750 3/8 7/8 2.1/2 4 0027047/16 0.4375 7/16 1“ 2.1/2 4 0027051/2 0.5000 1/2 1“ 3“ 4 0027069/16 0.5625 9/16 1.1/4 3.1/2 4 0027075/8 0.6250 5/8 1.1/4 3.1/2 4 00270811/16 0.6875 3/4 1.1/2 4“ 4 0027093/4 0.7500 3/4 1.1/2 4“ 4 0027107/8 0.8750 7/8 1.1/2 4“ 4 0027111“ 1.0000 1“ 1.1/2 4“ 4 002712



E3304M

E3304M

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 4 0011282.50 0.0984 3.0 7.0 38.0 4 0011293.00 0.1181 3.0 12.0 38.0 4 0011303.50 0.1378 4.0 12.0 50.0 4 0011314.00 0.1575 4.0 14.0 50.0 4 0011324.50 0.1772 5.0 14.0 50.0 4 0011335.00 0.1969 5.0 16.0 50.0 4 0011346.00 0.2362 6.0 19.0 63.0 4 0011357.00 0.2756 8.0 19.0 63.0 4 0011368.00 0.3150 8.0 19.0 63.0 4 0011379.00 0.3543 10.0 22.0 70.0 4 00113810.00 0.3937 10.0 22.0 70.0 4 00113911.00 0.4331 11.0 25.0 70.0 4 00114012.00 0.4724 12.0 25.0 75.0 4 00114114.00 0.5512 14.0 30.0 88.0 4 00114316.00 0.6299 16.0 32.0 88.0 4 00114418.00 0.7087 18.0 36.0 100.0 4 00114520.00 0.7874 20.0 38.0 100.0 4 00114625.00 0.9843 25.0 38.0 100.0 4 001147



E3304MG

E3304MG

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 4 0053282.50 0.0984 3.0 7.0 38.0 4 0053293.00 0.1181 3.0 12.0 38.0 4 0053303.50 0.1378 4.0 12.0 50.0 4 0053314.00 0.1575 4.0 14.0 50.0 4 0053324.50 0.1772 5.0 14.0 50.0 4 0053335.00 0.1969 5.0 16.0 50.0 4 0053346.00 0.2362 6.0 19.0 63.0 4 0053357.00 0.2756 8.0 19.0 63.0 4 0053368.00 0.3150 8.0 19.0 63.0 4 0053379.00 0.3543 10.0 22.0 70.0 4 00533810.00 0.3937 10.0 22.0 70.0 4 00533911.00 0.4331 11.0 25.0 70.0 4 00534012.00 0.4724 12.0 25.0 75.0 4 00534114.00 0.5512 14.0 30.0 88.0 4 00534316.00 0.6299 16.0 32.0 88.0 4 00534418.00 0.7087 18.0 36.0 100.0 4 00534520.00 0.7874 20.0 38.0 100.0 4 00534625.00 0.9843 25.0 38.0 100.0 4 005347



E3304MV

E3304MV

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 4 0043252.50 0.0984 3.0 7.0 38.0 4 0043263.00 0.1181 3.0 12.0 38.0 4 0043273.50 0.1378 4.0 12.0 50.0 4 0043284.00 0.1575 4.0 14.0 50.0 4 0043294.50 0.1772 5.0 14.0 50.0 4 0043305.00 0.1969 5.0 16.0 50.0 4 0043316.00 0.2362 6.0 19.0 63.0 4 0043327.00 0.2756 8.0 19.0 63.0 4 0043338.00 0.3150 8.0 19.0 63.0 4 0043349.00 0.3543 10.0 22.0 70.0 4 00433510.00 0.3937 10.0 22.0 70.0 4 00433611.00 0.4331 11.0 25.0 70.0 4 00433712.00 0.4724 12.0 25.0 75.0 4 00433814.00 0.5512 14.0 30.0 88.0 4 00433916.00 0.6299 16.0 32.0 88.0 4 00434018.00 0.7087 18.0 36.0 100.0 4 00434120.00 0.7874 20.0 38.0 100.0 4 00434225.00 0.9843 25.0 38.0 100.0 4 004343



EB3304

EB3304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 4 0013005/64 0.0781 1/8 1/4 1.1/2 4 0013013/32 0.0938 1/8 3/8 1.1/2 4 0013027/64 0.1094 1/8 3/8 1.1/2 4 0013031/8 0.1250 1/8 1/2 1.1/2 4 0013049/64 0.1406 3/16 9/16 2“ 4 0013055/32 0.1562 3/16 9/16 2“ 4 00130611/64 0.1719 3/16 9/16 2“ 4 0013073/16 0.1875 3/16 5/8 2“ 4 00130813/64 0.2031 1/4 5/8 2.1/2 4 0013097/32 0.2188 1/4 5/8 2.1/2 4 00131015/64 0.2344 1/4 3/4 2.1/2 4 0013111/4 0.2500 1/4 3/4 2.1/2 4 0013125/16 0.3125 5/16 7/8 2.1/2 4 0013163/8 0.3750 3/8 7/8 2.1/2 4 0013177/16 0.4375 7/16 1“ 2.1/2 4 0013181/2 0.5000 1/2 1“ 3“ 4 0013199/16 0.5625 9/16 1.1/4 3.1/2 4 0013205/8 0.6250 5/8 1.1/4 3.1/2 4 00132111/16 0.6875 3/4 1.1/2 4“ 4 0013223/4 0.7500 3/4 1.1/2 4“ 4 0013237/8 0.8750 7/8 1.1/2 4“ 4 0013241“ 1.0000 1“ 1.1/2 4“ 4 001325

● 4-flute, ball nose, regular length● End Mill ● Fraises de finition bout hémisphérique ● Fresas con punta esferica


EB3304G

EB3304G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 4 0030105/64 0.0781 1/8 1/4 1.1/2 4 0030113/32 0.0938 1/8 3/8 1.1/2 4 0030127/64 0.1094 1/8 3/8 1.1/2 4 0030131/8 0.1250 1/8 1/2 1.1/2 4 0030149/64 0.1406 3/16 9/16 2“ 4 0030155/32 0.1562 3/16 9/16 2“ 4 00301611/64 0.1719 3/16 9/16 2“ 4 0030173/16 0.1875 3/16 5/8 2“ 4 00301813/64 0.2031 1/4 5/8 2.1/2 4 0030197/32 0.2188 1/4 5/8 2.1/2 4 00302015/64 0.2344 1/4 3/4 2.1/2 4 0030211/4 0.2500 1/4 3/4 2.1/2 4 0030225/16 0.3125 5/16 7/8 2.1/2 4 0030233/8 0.3750 3/8 7/8 2.1/2 4 0030247/16 0.4375 7/16 1“ 2.1/2 4 0030251/2 0.5000 1/2 1“ 3“ 4 0030269/16 0.5625 9/16 1.1/4 3.1/2 4 0030275/8 0.6250 5/8 1.1/4 3.1/2 4 00302811/16 0.6875 3/4 1.1/2 4“ 4 0030293/4 0.7500 3/4 1.1/2 4“ 4 0030307/8 0.8750 7/8 1.1/2 4“ 4 0030311“ 1.0000 1“ 1.1/2 4“ 4 003032



EB3304V - EB3304MV

EB3304V

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

1/16 0.0625 1/8 1/4 1.1/2 4 0030705/64 0.0781 1/8 1/4 1.1/2 4 0030713/32 0.0938 1/8 3/8 1.1/2 4 0030727/64 0.1094 1/8 3/8 1.1/2 4 0030731/8 0.1250 1/8 1/2 1.1/2 4 0030749/64 0.1406 3/16 9/16 2“ 4 0030755/32 0.1562 3/16 9/16 2“ 4 00307611/64 0.1719 3/16 9/16 2“ 4 0030773/16 0.1875 3/16 5/8 2“ 4 00307813/64 0.2031 1/4 5/8 2.1/2 4 0030797/32 0.2188 1/4 5/8 2.1/2 4 00308015/64 0.2344 1/4 3/4 2.1/2 4 0030811/4 0.2500 1/4 3/4 2.1/2 4 0030825/16 0.3125 5/16 7/8 2.1/2 4 0030833/8 0.3750 3/8 7/8 2.1/2 4 0030847/16 0.4375 7/16 1“ 2.1/2 4 0030851/2 0.5000 1/2 1“ 3“ 4 0030869/16 0.5625 9/16 1.1/4 3.1/2 4 0030875/8 0.6250 5/8 1.1/4 3.1/2 4 00308811/16 0.6875 3/4 1.1/2 4“ 4 0030893/4 0.7500 3/4 1.1/2 4“ 4 0030907/8 0.8750 7/8 1.1/2 4“ 4 0030911“ 1.0000 1“ 1.1/2 4“ 4 003092


EB3304MV


d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 4 0047502.50 0.0984 3.0 7.0 38.0 4 0047513.00 0.1181 3.0 12.0 38.0 4 0047523.50 0.1378 4.0 12.0 50.0 4 0047534.00 0.1575 4.0 14.0 50.0 4 0047544.50 0.1772 5.0 14.0 50.0 4 0047555.00 0.1969 5.0 16.0 50.0 4 0047566.00 0.2362 6.0 19.0 63.0 4 0047577.00 0.2756 8.0 19.0 63.0 4 0047588.00 0.3150 8.0 19.0 63.0 4 0047599.00 0.3543 10.0 22.0 70.0 4 00476010.00 0.3937 10.0 22.0 70.0 4 00476111.00 0.4331 11.0 25.0 70.0 4 00476212.00 0.4724 12.0 25.0 75.0 4 00476314.00 0.5512 14.0 30.0 88.0 4 00476416.00 0.6299 16.0 32.0 88.0 4 00476518.00 0.7087 18.0 36.0 100.0 4 00476620.00 0.7874 20.0 38.0 100.0 4 00476725.00 0.9843 25.0 38.0 100.0 4 004768


EB3304M

EB3304M

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 4 0013442.50 0.0984 3.0 7.0 38.0 4 0013433.00 0.1181 3.0 12.0 38.0 4 0013423.50 0.1378 4.0 12.0 50.0 4 0013414.00 0.1575 4.0 14.0 50.0 4 0013404.50 0.1772 5.0 14.0 50.0 4 0013395.00 0.1969 5.0 16.0 50.0 4 0013386.00 0.2362 6.0 19.0 63.0 4 0013377.00 0.2756 8.0 19.0 63.0 4 0013368.00 0.3150 8.0 19.0 63.0 4 0013359.00 0.3543 10.0 22.0 70.0 4 00133410.00 0.3937 10.0 22.0 70.0 4 00133311.00 0.4331 11.0 25.0 70.0 4 00133212.00 0.4724 12.0 25.0 75.0 4 00133114.00 0.5512 14.0 30.0 88.0 4 00133016.00 0.6299 16.0 32.0 88.0 4 00132918.00 0.7087 18.0 36.0 100.0 4 00132820.00 0.7874 20.0 38.0 100.0 4 00132725.00 0.9843 25.0 38.0 100.0 4 001326



EB3304MG - E4304

■ ●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

2.00 0.0787 3.0 6.0 38.0 4 0046402.50 0.0984 3.0 7.0 38.0 4 0046413.00 0.1181 3.0 12.0 38.0 4 0046423.50 0.1378 4.0 12.0 50.0 4 0046434.00 0.1575 4.0 14.0 50.0 4 0046444.50 0.1772 5.0 14.0 50.0 4 0046455.00 0.1969 5.0 16.0 50.0 4 0046466.00 0.2362 6.0 19.0 63.0 4 0046477.00 0.2756 8.0 19.0 63.0 4 0046488.00 0.3150 8.0 19.0 63.0 4 0046499.00 0.3543 10.0 22.0 70.0 4 00465010.00 0.3937 10.0 22.0 70.0 4 00465111.00 0.4331 11.0 25.0 70.0 4 00465212.00 0.4724 12.0 25.0 75.0 4 00465314.00 0.5512 14.0 30.0 88.0 4 00465416.00 0.6299 16.0 32.0 88.0 4 00465518.00 0.7087 18.0 36.0 100.0 4 00465620.00 0.7874 20.0 38.0 100.0 4 00465725.00 0.9843 25.0 38.0 100.0 4 004658


EB3304MG


E4304

■●

d1Ømm

d1decimalInch

d2Ømm

l2

mm

l1

mm # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3/8 3“ 4 0022505/32 0.1562 3/8 7/16 3“ 4 0022513/16 0.1875 3/8 1/2 3“ 4 0022527/32 0.2188 3/8 9/16 3“ 4 0022531/4 0.2500 3/8 5/8 3“ 4 0022545/16 0.3125 3/8 3/4 3.1/2 4 0022563/8 0.3750 3/8 3/4 3.1/2 4 0022587/16 0.4375 7/16 7/8 4“ 4 0022591/2 0.5000 1/2 1“ 4“ 4 002260

● 4-flute, double end, regular length● End Mill ● Fraises de finition - Double ● Fresas de acabado - Doble final


EB4304

EB4304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3/8 3“ 4 0023505/32 0.1562 3/8 7/16 3“ 4 0023513/16 0.1875 3/8 1/2 3“ 4 0023527/32 0.2188 3/8 9/16 3“ 4 0023531/4 0.2500 3/8 5/8 3“ 4 0023545/16 0.3125 3/8 3/4 3.1/2 4 0023563/8 0.3750 3/8 3/4 3.1/2 4 0023587/16 0.4375 7/16 7/8 4“ 4 0023591/2 0.5000 1/2 1“ 4“ 4 002360

E6304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 4 0049003/16 0.1875 3/16 1.1/8 3“ 4 0049011/4 0.2500 1/4 1.1/2 4“ 4 0049025/16 0.3125 5/16 1.5/8 4“ 4 0049033/8 0.3750 3/8 1.3/4 4“ 4 0049047/16 0.4375 7/16 3“ 6“ 4 0049051/2 0.5000 1/2 3“ 6“ 4 0049065/8 0.6250 5/8 3“ 6“ 4 0049073/4 0.7500 3/4 3“ 6“ 4 0049081“ 1.0000 1 3“ 6“ 4 004909


E6304

● 4-flute, ball nose, double end, regular length

● 4-flute, extra length

● End Mill ● Fraises de finition bout hémisphérique - Double

● Fresas con punta esferica - Doble final


E6304G

E6304G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 4 0032853/16 0.1875 3/16 1.1/8 3“ 4 0032861/4 0.2500 1/4 1.1/2 4“ 4 0032875/16 0.3125 5/16 1.5/8 4“ 4 0032883/8 0.3750 3/8 1.3/4 4“ 4 0032897/16 0.4375 7/16 3“ 6“ 4 0032901/2 0.5000 1/2 3“ 6“ 4 0032915/8 0.6250 5/8 3“ 6“ 4 0032923/4 0.7500 3/4 3“ 6“ 4 0032931“ 1.0000 1 3“ 6“ 4 003294

E6304V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 4 0031653/16 0.1875 3/16 1.1/8 3“ 4 0031661/4 0.2500 1/4 1.1/2 4“ 4 0031675/16 0.3125 5/16 1.5/8 4“ 4 0031683/8 0.3750 3/8 1.3/4 4“ 4 0031697/16 0.4375 7/16 3“ 6“ 4 0031701/2 0.5000 1/2 3“ 6“ 4 0031715/8 0.6250 5/8 3“ 6“ 4 0031723/4 0.7500 3/4 3“ 6“ 4 0031731“ 1.0000 1 3“ 6“ 4 003174

E6304V

● 4-flute, extra length● End Mill ● Fraises de finition ● Fresas de acabado


EB6304

EB6304

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 4 0057003/16 0.1875 3/16 1.1/8 3“ 4 0057011/4 0.2500 1/4 1.1/2 4“ 4 0057025/16 0.3125 5/16 1.5/8 4“ 4 0057033/8 0.3750 3/8 1.3/4 4“ 4 0057047/16 0.4375 7/16 3“ 6“ 4 0057051/2 0.5000 1/2 3“ 6“ 4 0057065/8 0.6250 5/8 3“ 6“ 4 0057073/4 0.7500 3/4 3“ 6“ 4 0057081“ 1.0000 1 3“ 6“ 4 005709

EB6304G

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 4 0037153/16 0.1875 3/16 1.1/8 3“ 4 0037161/4 0.2500 1/4 1.1/2 4“ 4 0037175/16 0.3125 5/16 1.5/8 4“ 4 0037183/8 0.3750 3/8 1.3/4 4“ 4 0037197/16 0.4375 7/16 3“ 6“ 4 0037201/2 0.5000 1/2 3“ 6“ 4 0037215/8 0.6250 5/8 3“ 6“ 4 0037223/4 0.7500 3/4 3“ 6“ 4 0037231“ 1.0000 1 3“ 6“ 4 003724

EB6304G

● End Mill ● Fraises de finition bout hémisphérique ● Fresas con punta esferica● 4-flute, ball nose, extra length


EB6304V

EB6304V

■●

d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1/8 0.1250 1/8 1“ 3“ 4 0037453/16 0.1875 3/16 1.1/8 3“ 4 0037461/4 0.2500 1/4 1.1/2 4“ 4 0037475/16 0.3125 5/16 1.5/8 4“ 4 0037483/8 0.3750 3/8 1.3/4 4“ 4 0037497/16 0.4375 7/16 3“ 6“ 4 0037501/2 0.5000 1/2 3“ 6“ 4 0037515/8 0.6250 5/8 3“ 6“ 4 0037523/4 0.7500 3/4 3“ 6“ 4 0037531“ 1.0000 1 3“ 6“ 4 003754

RTDA

d1ØInch type

d1dec.Inch

d2ØInch

l2Inch

l1Inch

EDP #ore-Code

1/8 Coarse 0.1250 1/8 1/2 1.1/2 0025051/8 Medium 0.1250 1/8 1/2 1.1/2 0025063/16 Coarse 0.1875 3/16 5/8 2“ 0025073/16 Coarse 0.1875 1/4 5/8 2“ 0025083/16 Medium 0.1875 3/16 5/8 2“ 0025093/16 Medium 0.1875 1/4 5/8 2“ 002510

d1ØInch type

d1dec.Inch

d2ØInch

l2Inch

l1Inch

EDP #ore-Code

1/4 Coarse 0.2500 1/4 3/4 2“ 0025111/4 Fine 0.2500 1/4 3/4 2“ 0025121/4 Coarse 0.2500 1/4 1“ 3“ 0025131/4 Fine 0.2500 1/4 1“ 3“ 0025145/16 Medium 0.3125 5/16 1“ 2.1/2 0025153/8 Medium 0.3750 3/8 1“ 2.1/2 0025161/2 Medium 0.5000 1/2 1“ 3“ 002517

● Router

● End Mill ● Fraises de finition bout hémisphérique ● Fresas con punta esferica● 4-flute, ball nose, extra length

Style Description #Flutes Finish Page No.

HSS End Mill Table of Contents


9002 Rougher, Multi-Flute 4-8 HSCo, Bright TN9002 Rougher, Multi-Flute 4-8 HSCo, TiN TC9002 Rougher, Multi-Flute 4-8 HSCo, TiCN 9008 Rougher, Multi-Flute 4-8 HSCo, Bright TN9008 Rougher, Multi-Flute 4-8 HSCo, TiN TC9008 Rougher, Multi-Flute 4-8 HSCo, TiCN 9003 Rougher, Multi-Flute 4-8 HSCo, Bright TN9003 Rougher, Multi-Flute 4-8 HSCo, TiN TC9003 Rougher, Multi-Flute 4-8 HSCo, TiCN 9009 Rougher, Multi-Flute 4-8 HSCo, Bright TN9009 Rougher, Multi-Flute 4-8 HSCo, TiN TC9009 Rougher, Multi Flute 4-8 HSCo, TiCN 9004 Rougher, Multi-Flute 3-6 HSCo, Bright 963 Regular Length 2 HSCo, Bright 960 Regular Length, Multi-Flute 4-6 HSCo, Bright 961 Regular Length, Multi-Flute 4-6 HSCo, Bright 962 Extra Length 4 HSCo, Bright 920 Regular Length 2 HSS, Bright 920K Keyway, Regular Length 2 HSS, Bright TN920 Regular Length 2 HSS, TiN 905 Ball Nose, Regular Length 2 HSS, Bright 921 Long Length 2 HSS, Bright TN921 Long Length 2 HSS, TiN 922 Long Length 2 HSS, Bright 980 Regular Length 2 HSS, Bright 981 Long Length 2 HSS, Bright 982 Extra Length 2 HSS, Bright 923 Regular Length 2 HSS, Bright TN923 Regular Length 2 HSS, TiN 907 Ball Nose, Regular Length 2 HSS, Bright 930 Regular Length 3 HSS, Bright 931 Long Length 3 HSS, Bright 933 Regular Length 3 HSS, Bright 940 Regular Length 4 HSS, Bright TN940 Regular Length 4 HSS, TiN 941 Long Length 4 HSS, Bright 944 Extra Length 4 HSS, Bright 945 Regular Length 4 HSS, Bright TN945 Regular Length 4 HSS, TiN 900 Ball Nose, Regular Length 4 HSS, Bright 946 Long Length 4 HSS, Bright TN946 Long Length 4 HSS, TiN 901 Ball Nose, Long Length 4 HSS, Bright 947 Extra Length 4 HSS, Bright 943 Double End, Regular Length 4 HSS, Bright TN943 Double End, Regular Length 4 HSS, TiN 948 Double End, Regular Length 4 HSS, Bright TN948 Double End, Regular Length 4 HSS, TiN 911 Miniature, Double End 2 HSS, Bright 917 Miniature, Double End 4 HSS, Bright 919 Miniature, Double End 4 HSS, Bright 883 Corner Rounding Cutter N/A HSS, Bright C191 Slot Drill, Stub Length 2 HSCo, Bronze C192 Slot Drill, Stub Length 2 HSCo, Bronze C291 Regular Length 2-8 HSCo, Bronze C292 Long Length 2-6 HSCo, Bronze C391 Slot Drill, Standard Length 3 HSCo, Bronze C392 Slot Drill, Long Length 3 HSCo, Bronze

400 400 401 402 402 403 403 404 404 405 405 406 406 407 407 408 408 409 410 411 412 412 413 413 414 414 415 415 416 416 417 418 418 419 420 421 421 422 422 423 423 424 424 425 425 426 427 427 428 428 429 429 430 432 433 435 436 436


How To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code). 2. Find the closest diameter for your cutting application on the chart. 3. Select the type of cut and # Flutes to find your Ft Range.

Alpha Code

Type of Cut

0.078 1/8 5/32 3/16 1/4 5/16 13/32 1/2 9/16 5/8 11/16 3/4 7/8 1” 1.1/4 1.1/2

↕ 0,5D

↔ D

A

B

C

D

EF

↕ D

↔ 0,8D

GH

IJ

K

L

↕ 1,5D

↔ 0,25D

MN

O

P

Q

R

↕ 1,5D

↔ 0,1D

S

TU

V

X

Y

0.0003 0.0005 0.0007 0.0009 0.0011 0.0017 0.0024 0.0028 0.0033 0.0038 0.0038 0.0038 0.0039 0.0041 0.0042 0.0043

0.0003 0.0005 0.0006 0.0009 0.0010 0.0015 0.0021 0.0026 0.0030 0.0034 0.0034 0.0034 0.0035 0.0037 0.0037 0.0038

0.0003 0.0004 0.0006 0.0007 0.0009 0.0014 0.0019 0.0023 0.0027 0.0031 0.0031 0.0031 0.0031 0.0033 0.0034 0.0034

0.0003 0.0004 0.0006 0.0008 0.0009 0.0015 0.0020 0.0024 0.0028 0.0032 0.0032 0.0032 0.0033 0.0035 0.0038 0.0040

0.0005 0.0007 0.0009 0.0014 0.0017 0.0025 0.0034 0.0041 0.0048 0.0055 0.0056 0.0006 0.0057 0.0060 0.0066 0.0069

0.0004 0.0005 0.0007 0.0008 0.0010 0.0013 0.0016 0.0020 0.0022 0.0025 0.0028 0.0031 0.0031 0.0033 0.0033 0.0033 0.0010 0.0013 0.0014 0.0017 0.0020 0.0022 0.0025 0.0028 0.0028 0.0021 0.0021 0.0022 0.0009 0.0012 0.0013 0.0015 0.0018 0.0020 0.0023 0.0025 0.0021 0.0019 0.0019 0.0020 0.0008 0.0011 0.0011 0.0014 0.0016 0.0018 0.0020 0.0023 0.0023 0.0017 0.0017 0.0018 0.0009 0.0012 0.0013 0.0015 0.0018 0.0020 0.0023 0.0026 0.0026 0.0019 0.0019 0.0020

0.0014 0.0019 0.0026 0.0031 0.0036 0.0059 0.0035 0.0039 0.0038 0.0043 0.0043 0.0046

0.0004 0.0005 0.0007 0.0008 0.0010 0.0011 0.0012 0.0013 0.0013 0.0013 0.0015 0.0017

0.0003 0.0005 0.0007 0.0009 0.0012 0.0016 0.0022 0.0027 0.0031 0.0036 0.0041 0.0045 0.0035 0.0041 0.0038 0.0042

0.0003 0.0004 0.0006 0.0008 0.0011 0.0015 0.0020 0.0024 0.0028 0.0032 0.0037 0.0041 0.0024 0.0037 0.0034 0.0038

0.0002 0.0004 0.0006 0.0007 0.0010 0.0013 0.0018 0.0022 0.0026 0.0029 0.0033 0.0036 0.0029 0.0033 0.0031 0.0034

0.0003 0.0004 0.0006 0.0008 0.0011 0.0014 0.0019 0.0023 0.0027 0.0031 0.0015 0.0039 0.0031 0.0035 0.0033 0.0036

0.0004 0.0006 0.0008 0.0010 0.0015 0.0019 0.0026 0.0031 0.0036 0.0041 0.0035 0.0039 0.0039 0.0044 0.0050 0.0055

0.0005 0.0006 0.0008 0.0010 0.0011 0.0015 0.0019 0.0022 0.0026 0.0029 0.0033 0.0036 0.0036 0.0036 0.0041 0.0043

0.0004 0.0006 0.0009 0.0011 0.0015 0.0020 0.0028 0.0034 0.0039 0.0045 0.0051 0.0056 0.0044 0.0051 0.0048 0.0052

0.0004 0.0006 0.0008 0.0010 0.0014 0.0018 0.0025 0.0030 0.0035 0.0051 0.0046 0.0051 0.0040 0.0046 0.0043 0.0047

0.0003 0.0005 0.0007 0.0009 0.0013 0.0016 0.0023 0.0028 0.0032 0.0036 0.0041 0.0046 0.0036 0.0041 0.0039 0.0043

0.0004 0.0005 0.0008 0.0010 0.0013 0.0017 0.0024 0.0029 0.0034 0.0039 0.0043 0.0048 0.0038 0.0043 0.0041 0.0045

0.0005 0.0007 0.0010 0.0013 0.0018 0.0023 0.0032 0.0039 0.0045 0.0052 0.0044 0.0049 0.0048 0.0055 0.0062 0.0068

0.0006 0.0008 0.0010 0.0012 0.0014 0.0019 0.0023 0.0028 0.0024 0.0036 0.0041 0.0045 0.0045 0.0045 0.0051 0.0054

Feed per Tooth (Ft) Dia InchesAlpha Code

Type of Cut

392

HSS End Mill - Feed Rate Chart

Easy Calculations: (inch) Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute RPM = SFM/D x 3.82 F = Ft x T x RPM Ft = Feed Per Tooth T = Number of Teeth D = Cutting Dia. RPM = [(m/min.) x 1000] ÷ (3.14 x D) SFM = Surface Feet per Minute


Easy Calculations: (inch) Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute RPM = SFM/D x 3.82 F = Ft x T x RPM Ft = Feed Per Tooth T = Number of Teeth D = Cutting Dia. RPM = [(m/min.) x 1000] ÷ (3.14 x D) SFM = Surface Feet per Minute

1 2 3 4 5 6 8 10 12 14 16 18 20 22 25 28 30 32 36 40 50

↕ 0,5D

↔ D

A 0,004 0,008 0,013 0,017 0,024 0,029 0,043 0,060 0,072 0,084 0,096 0,097 0,096 0,099 0,105 0,109 0,108 0,106 0,108 0,108 0,105B 0,004 0,007 0,012 0,015 0,022 0,026 0,039 0,054 0,065 0,076 0,086 0,087 0,086 0,089 0,095 0,098 0,097 0,095 0,097 0,097 0,095C 0,003 0,006 0,011 0,014 0,019 0,023 0,035 0,049 0,058 0,068 0,078 0,079 0,078 0,080 0,085 0,088 0,087 0,086 0,087 0,087 0,085

D 0,004 0,007 0,011 0,014 0,020 0,024 0,037 0,051 0,061 0,071 0,081 0,082 0,081 0,084 0,089 0,099 0,091 0,097 0,091 0,101 0,101

E 0,007 0,012 0,018 0,024 0,035 0,042 0,063 0,087 0,105 0,122 0,140 0,141 0,140 0,144 0,153 0,171 0,157 0,168 0,157 0,175 0,175

F 0,007 0,009 0,013 0,018 0,021 0,025 0,033 0,041 0,050 0,055 0,064 0,072 0,079 0,079 0,085 0,085 0,085 0,085 0,085 0,085 0,085

↕ D

↔ 0,8D

G 0,026 0,034 0,036 0,043 0,050 0,057 0,064 0,071 0,071 0,054 0,053 0,054 0,053 0,056 0,057 0,060

H 0,023 0,031 0,032 0,039 0,045 0,051 0,058 0,064 0,064 0,049 0,048 0,049 0,048 0,050 0,051 0,054

I 0,021 0,028 0,029 0,035 0,041 0,046 0,052 0,058 0,058 0,044 0,043 0,044 0,043 0,045 0,046 0,049

J 0,024 0,031 0,033 0,039 0,046 0,052 0,059 0,065 0,065 0,049 0,049 0,049 0,049 0,051 0,052 0,055

K 0,035 0,047 0,065 0,079 0,092 0,105 0,088 0,098 0,097 0,110 0,110 0,110 0,110 0,115 0,118 0,123

L 0,010 0,013 0,017 0,020 0,025 0,028 0,030 0,032 0,033 0,034 0,036 0,038 0,039 0,040 0,042 0,042

↕ 1,5D

↔ 0,25D

M 0,008 0,012 0,018 0,023 0,031 0,041 0,057 0,069 0,080 0,091 0,103 0,114 0,090 0,103 0,085 0,091 0,097 0,110 0,107 0,086

N 0,007 0,011 0,016 0,021 0,028 0,037 0,051 0,062 0,072 0,082 0,093 0,103 0,081 0,093 0,077 0,082 0,087 0,099 0,096 0,077

O 0,006 0,010 0,015 0,019 0,025 0,033 0,046 0,056 0,065 0,074 0,083 0,092 0,073 0,083 0,069 0,074 0,079 0,089 0,087 0,070

P 0,007 0,010 0,016 0,020 0,027 0,035 0,049 0,059 0,069 0,079 0,088 0,098 0,078 0,088 0,073 0,079 0,084 0,094 0,092 0,074

Q 0,009 0,014 0,021 0,026 0,036 0,048 0,066 0,079 0,092 0,106 0,089 0,099 0,098 0,111 0,111 0,119 0,127 0,143 0,139 0,148

R 0,012 0,016 0,020 0,025 0,029 0,038 0,047 0,056 0,065 0,073 0,083 0,092 0,092 0,092 0,092 0,092 0,104 0,104 0,108 0,108

↕ 1,5D

↔ 0,1D

S 0,010 0,015 0,023 0,029 0,039 0,051 0,071 0,086 0,100 0,114 0,129 0,143 0,113 0,129 0,107 0,114 0,122 0,137 0,133 0,107

T 0,009 0,014 0,021 0,026 0,035 0,046 0,064 0,077 0,090 0,103 0,116 0,129 0,102 0,116 0,096 0,103 0,110 0,123 0,120 0,096

U 0,008 0,012 0,019 0,023 0,032 0,041 0,058 0,070 0,081 0,092 0,104 0,116 0,092 0,104 0,087 0,092 0,099 0,111 0,108 0,087

V 0,009 0,013 0,020 0,025 0,033 0,044 0,061 0,074 0,086 0,098 0,110 0,123 0,097 0,110 0,092 0,098 0,105 0,118 0,115 0,092

X 0,012 0,017 0,026 0,033 0,045 0,059 0,082 0,099 0,115 0,132 0,111 0,124 0,122 0,139 0,139 0,148 0,158 0,178 0,173 0,186

Y 0,015 0,020 0,025 0,031 0,036 0,047 0,059 0,070 0,081 0,092 0,104 0,115 0,115 0,115 0,115 0,115 0,130 0,130 0,136 0,136

Alpha Code

Type of Cut

Feed per Tooth (Ft) Dia MM

393

HSS End Mill - Feed Rate ChartHow To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code). 2. Find the closest diameter for your cutting application on the chart. 3. Select the type of cut and # Flutes to find your Ft Range.

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







HSS End Mills

HS

S E

nd M

illsHelix

AngleSlotting, Ramping

Slotting, Ramping,

Diving

Finishing

Corner Rounding


Straight Shank

Weldon Shank






Style:Flutes:

Finish/Coating:


Tool Length:Shank:

Material:

Tolerance:


Icon Guide for HSS End MillsStandard:

394

1

23

4

2

13



9002 TN9002 TC9002

Multi- Flute

Multi- Flute

Multi- Flute

400 400 401●164G ●197G ●197G■131G ■157G ■184G■115H ■138H ■161H●98H ●118H ●138H

●75L ●92L ●105L

●92G ●112G ●128G●75G ●92G ●105G●131H ●157H ●184H●82H ●98H ●128H●92J ●112J ●128J●75J ●92J ●105J

●157J ●187J ●220J●43I ●49I ●59I

●410I ●492I ●574I■410I ■492I ■574I■410I ■492I ■574I

●984K ●1181K ●1378K●295K ●354K ●413K

●410I ●492I ●574I


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.1

HS

S E

nd M

ills


HSS End Mills (con‘t)9008 TN9008 TC9008 9003 TN9003 TC9003 9009 TN9009 TC9009 9004 963

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute

Multi- Flute 2-Flute

402 402 403 403 404 404 405 405 406 406 407●148G ●197G ●197G ●164G ●197G ●197G ●148G ●197G ●197G ●164G ■164A■118G ■157G ■184G ■131G ■157G ■184G ■118G ■157G ■184G ■131G ■131A■102H ■138H ■161H ■115H ■138H ■161H ■102H ■138H ■161H ■115H ●115B●89H ●118H ●138H ●98H ●118H ●138H ●89H ●118H ●138H ●98H ●98B

●82G ●112G ●128G ●92G ●112G ●128G ●82G ●112G ●128G ●92G ●92A●66G ●92G ●105G ●75G ●92G ●105G ●66G ●92G ●105G ●75G ●75A●118H ●157H ●184H ●131H ●157H ●184H ●118H ●157H ●184H ●131H ●131B●72H ●98H ●128H ●82H ●98H ●128H ●72H ●98H ●128H ●82H ●82B●82J ●112J ●128J ●92J ●112J ●128J ●82J ●112J ●128J ●92J ●92D●66J ●92J ●105J ●75J ●92J ●105J ●66J ●92J ●105J ●75J ●75D

●141J ●187J ●220J ●157J ●187J ●220J ●141J ●187J ●220J ●157J ■157D●36I ●49I ●59I ●43I ●49I ●59I ●36I ●49I ●59I ●43I ●43C

●367I ●492I ●574I ●410I ●492I ●574I ●367I ●492I ●574I ●410I ■410C■367I ■492I ■574I ■410I ■492I ■574I ■367I ■492I ■574I ■410I ■410C■367I ■492I ■574I ■410I ■492I ■574I ■367I ■492I ■574I ■410I ■410C

●984E●886K ●1181K ●1378K ●984K ●1181K ●1378K ●886K ●1181K ●1378K ●984K ●984E●266K ●354K ●413K ●295K ●354K ●413K ●266K ●354K ●413K ●295K ●295E

●367I ●492I ●574I ●410I ●492I ●574I ●367I ●492I ●574I ●410I ●410C

960 961 962

Multi- Flute

Multi- Flute 4-Flute

407 408 408■164S ■148S ■148S■131S ■118S ■118S■115T ■102T ■102T●98T ●89T ●89T

●75Y ●66Y ●66Y

●92S ●82S ●82S●75S ●66S ●66S●131T ●118T ●118T●82T ●72T ●72T■92V ■82V ■82V●75V ●66V ●66V

■157V ■141V ■141V●43U ●36U ●36U

■410U ■367U ■367U■410U ■367U ■367U■410U ■367U ■367U

●984X ●886X ●886X●984X ●886X ●886X●295X ●266X ●266X

●410U ●367U ●367U

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







HSS End Mills

HS

S E

nd M

illsHelix


Slotting, Ramping,

Diving

Finishing

Corner Rounding


Straight Shank

Weldon Shank






Style:Flutes:

Finish/Coating:


Tool Length:Shank:

Material:

Tolerance:



396

1

23

4

2

13



920

2-Flute

409■98A■89A●75B

●82A●66A●82B

●59D●49D

●98D●20C

●180C●197C●197C

●197E●180E●115E

●197C

920K TN920

2-Flute 2-Flute

410 411■98A ■118A■89A ■105A●75B ●89B

●82A ●98A●66A ●79A●82B ●98B

●59D ●72D●49D ●59D

●98D ●118D●20C ●23C

●180C ●216C●197C ●236C●197C ●236C

●197E ●236E●180E ●216E●115E ●138E

●197C ●236C


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.1

HS

S E

nd M

ills


HSS End Mills (con‘t)905 921 TN921 922 980 981 982 923 TN923 907 930 931

2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 3-Flute 3-Flute

412 412 413 413 414 414 415 415 416 416 417 418■112S ■98A ■118A ■98A ■164A ■148A ■148A ■98A ■118A ■112S ●164A■89S ■89A ■105A ■89A ●131A ●118A ●118A ■89A ■105A ■89S ●131A ■131A●79T ●75B ●89B ●75B ●115B ●102B ●102B ●75B ●89B ●79T ■115B ■115B

●98B ●98B●66C

●75F ●66F ●66F ●75F●62F ●56F ●56F ●62F

●89S ●82A ●98A ●82A ●82A ●98A ●89S ●92A●72S ●66A ●79A ●66A ●66A ●79A ●72S ●75A ●75A●89T ●82B ●98B ●82B ●82B ●98B ●89T ●131B ●131B

●82B ●82B●62V ●59D ●72D ●59D ●92D ●82D ●82D ●59D ●72D ●62V ●92D ■92D●49V ●49D ●59D ●49D ●49D ●59D ●49V ■75D ●75D

●33D●108V ●98D ●118D ●98D ●157D ●141D ●141D ●98D ●118D ●108V ■157D●20U ●20C ●23C ●20C ●20C ●23C ●20U ■43C ●43C

●20D●200U ●180C ●216C ●180C ■410C ■367C ■367C ●180C ●216C ●200U ■410C●223U ●197C ●236C ●197C ●197C ●236C ●223U ■410C ■410C●223U ●197C ●236C ●197C ●197C ●236C ●223U ■410C ■410C

■49C●243X ●197E ●236E ●197E ■984E ■886E ■886E ●197E ●236E ●243X●194X ●180E ●216E ●180E ■984E ■886E ■886E ●180E ●216E ●194X ●984E●144X ●115E ●138E ●115E ■295E ■266E ■266E ●115E ●138E ●144X ●295E ●295E

●197A●200U ●197C ●236C ●197C ●410C ●367C ●367C ●197C ●236C ●200U ●410C

●410C

933

3-Flute

418

●131A■115B●98B●66C

●62F

●75A●131B●82B●92D■75D●33D

■43C●20D

■410C■410C■49C

●295E●197A

●410C

940 TN940

Multi- Flute

Multi- Flute

419 420■115S ■138S■92S ■112S■79T ■95T●69T ●82T

●52Y ●62Y

●92S ●112S●75S ●92S●92T ●112T●56T ●66T■62V ■75V●52V ●62V

■108V ■131V●20U ●23U

■203U ■243U■223U ■269U■223U ■269U

●197X ●236X●148X ●177X

●203U ●243U

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







HSS End Mills

HS

S E

nd M

illsHelix


Slotting, Ramping,

Diving

Finishing

Corner Rounding


Straight Shank

Weldon Shank






Style:Flutes:

Finish/Coating:


Tool Length:Shank:

Material:

Tolerance:



398

1

23

4

2

13



941

Multi- Flute

421■148S■118S■102T●89T

●66Y

●82S●66S●118T●72T■82V●66V

■141V●36U

■367U■367U■367U

●886X●886X●266X

●367U

944

Multi- Flute

421■148S■118S■102T●89T

●66Y

●82S●66S●118T●72T■82V●66V

■141V●36U

■367U■367U■367U

●886X●886X●266X

●367U

945, 900

4-Flute

422-423■164S■131S■115T●98T

●75Y

●92S●75S●131T●82T■92V●75V

■157V●43U

■410U■410U■410U

●984X●984X●295X

●410U

TN945

4-Flute

422■138S■112S■95T●82T

●62Y

●112S●92S●112T●66T■75V●62V

■131V●23U

■243U■269U■269U

●236X●177X

●243U


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.1

HS

S E

nd M

ills


HSS End Mills (con‘t)C191 C192 C291 C292 C391 C392

2-Flute 2-Flute Multi- Flute

Multi- Flute 3-Flute 3-Flute

430 432 433 435 436 436■47A ■42A ■42S ■38S ●42A ●38A■37A ■34A ■34S ■30S ■34A ■30A●32B ●29B ■29T ■26T ■29B ■26B●28B ●25B ●25T ●23T ●25B ●23B

●21F ●19F ●19Y ●17Y ●19F ●17F

●26A ●23A ●23S ●21S ●23A ●21A●21A ●19A ●19S ●17S ●19A ●17A●37B ●34B ●34T ●30T ●34B ●30B●23B ●21B ●21T ●19T ●21B ●19B■26D ■23D ■23V ■21V ■23D ■21D●21C ●19D ●19V ●17V ●19D ●17D

■45D ■41D ■41V ■36V ■41D ■36D●12C ●11C ●11U ●10U ●11C ●10C

■117C ■106C ■96U ■106C ■96C■117C ■106C ■96U ■106C ■96C■117C ■106C ■96U ■106C ■96C

●282E ●256E●282E ●256E ●256E ●230E●84E ●76E ●76X ●69X ●76E ●69E

●117C ●106C ●96U ●106C ●96C

883

Corner Rounding

429■66p■66p■52p■46p●33p●26p

■43p■30p●20r●16r■59r■49r■52r■33r■52n■36o●20o■66p■13o●7m■131p■148p■148p●16m■180r■134r■85r■56r

●56r

946 TN946 901 947 943 TN943 948 TN948 911 917 919

4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 2-Flute Mini

4-Flute Mini

4-Flute Mini

423 424 424 425 425 426 427 427 428 428 429■98A ■138S ■148S ■98A ■115S ■138S ■115S ■138S ■98A ■98A ■98A■89A ■112S ■118S ■89A ■92S ■112S ■92S ■112S ■89A ■89A ■89A●75B ■95T ■102T ●75B ■79T ■95T ■79T ■95T ●75B ●75B ●75B

●82T ●89T ●69T ●82T ●69T ●82T

●62Y ●66Y ●52Y ●62Y ●52Y ●62Y

●82A ●112S ●82S ●82A ●92S ●112S ●92S ●112S ●82A ●82A ●82A●66A ●92S ●66S ●66A ●75S ●92S ●75S ●92S ●66A ●66A ●66A●82B ●112T ●118T ●82B ●92T ●112T ●92T ●112T ●82B ●82B ●82B

●66T ●72T ●56T ●66T ●56T ●66T●59D ■75V ■82V ●59D ■62V ■75V ■62V ■75V ●59D ●59D ●59D●49D ●62V ●66V ●49D ●52V ●62V ●52V ●62V ●49D ●49D ●49D

●98D ■131V ■141V ●98D ■108V ■131V ■108V ■131V ●98D ●98D ●98D●20C ●23U ●36U ●20C ●20U ●23U ●20U ●23U ●20C ●20C ●20C

●180C ■243U ■367U ●180C ■203U ■243U ■203U ■243U ●180C ●180C ●180C●197C ■269U ■367U ●197C ■223U ■269U ■223U ■269U ●197C ●197C ●197C●197C ■269U ■367U ●197C ■223U ■269U ■223U ■269U ●197C ●197C ●197C

●886X ●197E ●197E●180E ●236X ●886X ●180E ●197X ●236X ●197X ●236X ●180E ●180E ●180E●115E ●177X ●266X ●115E ●148X ●177X ●148X ●177X ●115E ●115E ●115E

●197C ●243U ●367U ●197C ●203U ●243U ●203U ●243U ●197C ●197C ●197C

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Surface Feet per Minute (SFM) Surface Feet per Minute (SFM)

Slot Drill

Slot Drill

Slot Drill

Slot Drill

Thre

aded

Sha

nk E

nd M

ills


9002

9002

■ ●d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 4 52100145/16 0.3125 3/4 2.1/2 3/8 4 52100153/8 0.3750 3/4 2.1/2 3/8 4 52100167/16 0.4375 1.1/4 3.1/4 1/2 4 52100171/2 0.5000 1.1/4 3.1/4 1/2 4 52100189/16 0.5625 1.3/8 3.3/8 1/2 4 52100195/8 0.6250 1.5/8 3.3/4 5/8 4 52100203/4 0.7500 1.5/8 3.7/8 3/4 4 52100217/8 0.8750 1.7/8 4.1/8 3/4 5 52100221“ 1.0000 2“ 4.1/2 1“ 5 52100231.1/4 1.2500 2“ 4.1/2 1.1/4 6 52100241.1/2 1.5000 2“ 4.1/2 1.1/4 6 52100251.3/4 1.7500 2“ 4.1/2 1.1/4 6 52100262“ 2.0000 2“ 4.1/2 1.1/4 8 5210027

TN9002

TN9002

■ ●

d1Ø inch

d1 decimalInch

l2Inch

l1Inch

d2Ø inch

# Flutes

EDP # ore-Code

1/4 0.2500 5/8 2.7/16 3/8 4 52600145/16 0.3125 3/4 2.1/2 3/8 4 52600153/8 0.3750 3/4 2.1/2 3/8 4 52600167/16 0.4375 1.1/4 3.1/4 1/2 4 52600171/2 0.5000 1.1/4 3.1/4 1/2 4 52600189/16 0.5625 1.3/8 3.3/8 1/2 4 52600195/8 0.6250 1.5/8 3.3/4 5/8 4 52600203/4 0.7500 1.5/8 3.7/8 3/4 4 52600217/8 0.8750 1.7/8 4.1/8 3/4 5 52600221“ 1.0000 2“ 4.1/2 1“ 5 52600231.1/4 1.2500 2“ 4.1/2 1.1/4 6 52600241.1/2 1.5000 2“ 4.1/2 1.1/4 6 52600251.3/4 1.7500 2“ 4.1/2 1.1/4 6 52600262“ 2.0000 2“ 4.1/2 1.1/4 8 5260027

● End Mill ● Fraises d’ébauche ● Fresas Gran Desbaste● Rougher


TC9002

TC9002

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 4 52700145/16 0.3125 3/4 2.1/2 3/8 4 52700153/8 0.3750 3/4 2.1/2 3/8 4 52700167/16 0.4375 1.1/4 3.1/4 1/2 4 52700171/2 0.5000 1.1/4 3.1/4 1/2 4 52700189/16 0.5625 1.3/8 3.3/8 1/2 4 52700195/8 0.6250 1.5/8 3.3/4 5/8 4 52700203/4 0.7500 1.5/8 3.7/8 3/4 4 52700217/8 0.8750 1.7/8 4.1/8 3/4 5 52700221“ 1.0000 2“ 4.1/2 1“ 5 52700231.1/4 1.2500 2“ 4.1/2 1.1/4 6 52700241.1/2 1.5000 2“ 4.1/2 1.1/4 6 52700251.3/4 1.7500 2“ 4.1/2 1.1/4 6 52700262“ 2.0000 2“ 4.1/2 1.1/4 8 5270027

● End Mill ● Fraises d’ébauche ● Fresas Gran Desbaste● Rougher


TN9008

■●d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/8 3/8 4 52600783/8 0.3750 1.1/2 3.1/4 3/8 4 52600791/2 0.5000 2“ 4“ 1/2 4 52600805/8 0.6250 2.1/2 4.5/8 5/8 4 52600813/4 0.7500 3“ 5.1/4 3/4 4 52600827/8 0.8750 3.1/2 5.3/4 3/4 6 52600831“ 1.0000 4“ 6.1/2 1“ 5 52600841.1/4 1.2500 4“ 6.1/2 1.1/4 6 52600851.1/2 1.5000 4“ 6.1/2 1.1/4 6 52600861.3/4 1.7500 4“ 6.1/2 1.1/4 6 52600872“ 2.0000 4“ 6.1/2 1.1/4 8 5260088

TN9008

9008

9008

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/8 3/8 4 52100783/8 0.3750 1.1/2 3.1/4 3/8 4 52100791/2 0.5000 2“ 4“ 1/2 4 52100805/8 0.6250 2.1/2 4.5/8 5/8 4 52100813/4 0.7500 3“ 5.1/4 3/4 4 52100827/8 0.8750 3.1/2 5.3/4 3/4 6 52100831“ 1.0000 4“ 6.1/2 1“ 5 52100841.1/4 1.2500 4“ 6.1/2 1.1/4 6 52100851.1/2 1.5000 4“ 6.1/2 1.1/4 6 52100861.3/4 1.7500 4“ 6.1/2 1.1/4 6 52100872“ 2.0000 4“ 6.1/2 1.1/4 8 5210088

● End Mill ● Fraises d’ébauche ● Fresas Gran Desbaste● Rougher, fine profile


9003

■●

d1ØInch

d1decimalInch

l2

Inch

l1

Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 4 52100285/16 0.3125 3/4 2.1/2 3/8 4 52100293/8 0.3750 3/4 2.1/2 3/8 4 52100307/16 0.4375 1.1/4 3.1/4 1/2 4 52100311/2 0.5000 1.1/4 3.1/4 1/2 4 52100329/16 0.5625 1.3/8 3.3/8 1/2 4 52100335/8 0.6250 1.5/8 3.3/4 5/8 4 52100343/4 0.7500 1.5/8 3.7/8 3/4 4 52100357/8 0.8750 1.7/8 4.1/8 3/4 5 52100361“ 1.0000 2“ 4.1/2 1“ 5 52100371.1/4 1.2500 2“ 4.1/2 1.1/4 6 52100381.1/2 1.5000 2“ 4.1/2 1.1/4 6 52100391.3/4 1.7500 2“ 4.1/2 1.1/4 6 52100402“ 2.0000 2“ 4.1/2 1.1/4 8 5210041

TC9008 - 9003

9003

TC9008

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/8 3/8 4 52700783/8 0.3750 1.1/2 3.1/4 3/8 4 52700791/2 0.5000 2“ 4“ 1/2 4 52700805/8 0.6250 2.1/2 4.5/8 5/8 4 52700813/4 0.7500 3“ 5.1/4 3/4 4 52700827/8 0.8750 3.1/2 5.3/4 3/4 6 52700831“ 1.0000 4“ 6.1/2 1“ 5 52700841.1/4 1.2500 4“ 6.1/2 1.1/4 6 52700851.1/2 1.5000 4“ 6.1/2 1.1/4 6 52700861.3/4 1.7500 4“ 6.1/2 1.1/4 6 52700872“ 2.0000 4“ 6.1/2 1.1/4 8 5270088

● Fraises d’ébauche

● Rougher, coarse profile

● End Mill ● Fresas Gran Desbaste● Rougher, fine profile● Long length

● Regular length

● Fraises d’ébauche● End Mill ● Fresas Gran Desbaste


TN9003 - TC9003

TC9003

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 4 52700285/16 0.3125 3/4 2.1/2 3/8 4 52700293/8 0.3750 3/4 2.1/2 3/8 4 52700307/16 0.4375 1.1/4 3.1/4 1/2 4 52700311/2 0.5000 1.1/4 3.1/4 1/2 4 52700329/16 0.5625 1.3/8 3.3/8 1/2 4 52700335/8 0.6250 1.5/8 3.3/4 5/8 4 52700343/4 0.7500 1.5/8 3.7/8 3/4 4 52700357/8 0.8750 1.7/8 4.1/8 3/4 5 52700361“ 1.0000 2“ 4.1/2 1“ 5 52700371.1/4 1.2500 2“ 4.1/2 1.1/4 6 52700381.1/2 1.5000 2“ 4.1/2 1.1/4 6 52700391.3/4 1.7500 2“ 4.1/2 1.1/4 6 52700402“ 2.0000 2“ 4.1/2 1.1/4 8 5270041

TN9003

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 4 52600285/16 0.3125 3/4 2.1/2 3/8 4 52600293/8 0.3750 3/4 2.1/2 3/8 4 52600307/16 0.4375 1.1/4 3.1/4 1/2 4 52600311/2 0.5000 1.1/4 3.1/4 1/2 4 52600329/16 0.5625 1.3/8 3.3/8 1/2 4 52600335/8 0.6250 1.5/8 3.3/4 5/8 4 52600343/4 0.7500 1.5/8 3.7/8 3/4 4 52600357/8 0.8750 1.7/8 4.1/8 3/4 5 52600361“ 1.0000 2“ 4.1/2 1“ 5 52600371.1/4 1.2500 2“ 4.1/2 1.1/4 6 52600381.1/2 1.5000 2“ 4.1/2 1.1/4 6 52600391.3/4 1.7500 2“ 4.1/2 1.1/4 6 52600402“ 2.0000 2“ 4.1/2 1.1/4 8 5260041

● End Mill ● Fraises d’ébauche ● Fresas Gran Desbaste● Rougher, coarse profile


9009

9009

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/8 3/8 4 52100893/8 0.3750 1.1/2 3.1/4 3/8 4 52100901/2 0.5000 2“ 4“ 1/2 4 52100915/8 0.6250 2.1/2 4.5/8 5/8 4 52100923/4 0.7500 3“ 5.1/4 3/4 4 52100937/8 0.8750 3.1/2 5.3/4 3/4 6 52100941“ 1.0000 4“ 6.1/2 1“ 5 52100951.1/4 1.2500 4“ 6.1/2 1.1/4 6 52100961.1/2 1.5000 4“ 6.1/2 1.1/4 6 52100971.3/4 1.7500 4“ 6.1/2 1.1/4 6 52100982“ 2.0000 4“ 6.1/2 1.1/4 8 5210099

TN9009

TN9009

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/8 3/8 4 52600893/8 0.3750 1.1/2 3.1/4 3/8 4 52600901/2 0.5000 2“ 4“ 1/2 4 52600915/8 0.6250 2.1/2 4.5/8 5/8 4 52600923/4 0.7500 3“ 5.1/4 3/4 4 52600937/8 0.8750 3.1/2 5.3/4 3/4 6 52600941“ 1.0000 4“ 6.1/2 1“ 5 52600951.1/4 1.2500 4“ 6.1/2 1.1/4 6 52600961.1/2 1.5000 4“ 6.1/2 1.1/4 6 52600971.3/4 1.7500 4“ 6.1/2 1.1/4 6 52600982“ 2.0000 4“ 6.1/2 1.1/4 8 5260099

● End Mill ● Fraises d’ébauche ● Fresas Gran Desbaste● Rougher, coarse profile● Long length


TC9009

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/8 3/8 4 52700893/8 0.3750 1.1/2 3.1/4 3/8 4 52700901/2 0.5000 2“ 4“ 1/2 4 52700915/8 0.6250 2.1/2 4.5/8 5/8 4 52700923/4 0.7500 3“ 5.1/4 3/4 4 52700937/8 0.8750 3.1/2 5.3/4 3/4 6 52700941“ 1.0000 4“ 6.1/2 1“ 5 52700951.1/4 1.2500 4“ 6.1/2 1.1/4 6 52700961.1/2 1.5000 4“ 6.1/2 1.1/4 6 52700971.3/4 1.7500 4“ 6.1/2 1.1/4 6 52700982“ 2.0000 4“ 6.1/2 1.1/4 8 5270099

TC9009

9004● Fraises d’ébauche

● End Mill ● Fraises d’ébauche ● Fresas Gran Desbaste● Rougher, coarse profile

9004

■●d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 3 52100423/8 0.3750 3/4 2.1/2 3/8 4 52100431/2 0.5000 1.1/4 3.1/4 1/2 4 52100445/8 0.6250 1.5/8 3.3/4 5/8 4 52100453/4 0.7500 1.5/8 3.7/8 3/4 4 52100467/8 0.8750 1.7/8 4.1/8 3/4 5 52100471“ 1.0000 2“ 4.1/2 1“ 5 52100481.1/4 1.2500 2“ 4.1/2 1.1/4 6 52100491.1/2 1.5000 2“ 4.1/2 1.1/4 6 52100502“ 2.0000 2“ 4.1/2 1.1/4 6 5210051

● End Mill ● Fresas Gran Desbaste● Truncated, rougher & finisher


963

963 - 960

960


963

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 2 51106333/16 0.1875 7/16 2.3/8 3/8 2 51106341/4 0.2500 1/2 2.7/16 3/8 2 51106355/16 0.3125 9/16 2.1/2 3/8 2 51106363/8 0.3750 9/16 2.1/2 3/8 2 51106371/2 0.5000 1“ 3.1/4 1/2 2 51106385/8 0.6250 1.5/16 3.3/4 5/8 2 51106393/4 0.7500 1.5/16 3.7/8 3/4 2 51106401“ 1.0000 1.5/8 4.1/2 1“ 2 5110641

960

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 4 51106603/16 0.1875 1/2 2.3/8 3/8 4 51106611/4 0.2500 5/8 2.7/16 3/8 4 51106625/16 0.3125 3/4 2.1/2 3/8 4 51106633/8 0.3750 3/4 2.1/2 3/8 4 51106641/2 0.5000 1.1/4 3/1/4 1/2 4 51106651/2 0.5000 1.1/4 3.1/4 1/2 6 51107725/8 0.6250 1.5/8 3.3/4 5/8 6 51107735/8 0.6250 1.5/8 3.3/4 5/8 4 51106663/4 0.7500 1.5/8 3.7/8 3/4 4 51106673/4 0.7500 1.5/8 3.7/8 3/4 6 51107741“ 1.0000 2“ 4.1/2 1“ 6 51107781“ 1.0000 2“ 4.1/2 1“ 4 51106691.1/4 1.2500 2“ 4.1/2 1.1/4 6 51106701.1/2 1.5000 2“ 4.1/2 1.1/4 6 51106712“ 2.0000 4“ 7.3/4 2“ 6 5110782

● End Mill ● Fraises de finition ● Fresas de acabado● Multi-flute, regular length

● 2-Flute, Regular Length


962● Fraises de finition

961

961

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

3/8 0.3750 1.1/2 3.1/4 3/8 4 51106721/2 0.5000 2“ 4“ 1/2 4 51106735/8 0.6250 2.1/2 4.5/8 5/8 4 51106743/4 0.7500 3“ 5.1/4 3/4 4 51106753/4 0.7500 3“ 5.1/4 3/4 6 51107751“ 1.0000 4“ 6.1/2 1“ 6 51107791“ 1.0000 4“ 6.1/2 1“ 4 51106771.1/4 1.2500 4“ 6.1/2 1.1/4 6 5110678

962

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

3/8 0.3750 2.1/2 4.1/4 3/8 4 51106791/2 0.5000 3“ 5“ 1/2 4 51106805/8 0.6250 4“ 6.1/8 5/8 4 51106813/4 0.7500 4“ 6.1/4 3/4 4 51106821“ 1.0000 6“ 8.1/2 1“ 4 5110684

● End Mill ● Fresas de acabado● 4-flute, extra length

● End Mill ● Fraises de finition ● Fresas de acabado● Multi-flute, long length


920

920

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 2 51103023/16 0.1875 7/16 2.3/8 3/8 2 51103031/4 0.2500 1/2 2.7/16 3/8 2 51103045/16 0.3125 9/16 2.1/2 3/8 2 51103053/8 0.3750 9/16 2.1/2 3/8 2 51103067/16 0.4375 13/16 2.11/16 3/8 2 51103071/2 0.5000 13/16 2.11/16 3/8 2 51103081/2 0.5000 1“ 3.1/4 1/2 2 51103099/16 0.5625 1.1/8 3.3/8 1/2 2 51103105/8 0.6250 1.1/8 3.3/8 1/2 2 51103115/8 0.6250 1.5/16 3.3/4 5/8 2 511031411/16 0.6875 1.5/16 3.3/4 5/8 2 511031511/16 0.6875 1.5/16 3.5/8 1/2 2 51103123/4 0.7500 1.5/16 3.5/8 1/2 2 51103133/4 0.7500 1.5/16 3.3/4 5/8 2 51103163/4 0.7500 1.5/16 3.7/8 3/4 2 511070813/16 0.8125 1.1/2 4“ 5/8 2 51103177/8 0.8750 1.1/2 4“ 5/8 2 51103187/8 0.8750 1.1/2 4.1/8 7/8 2 51103217/8 0.8750 1.1/2 4.1/8 3/4 2 511070915/16 0.9375 1.1/2 4“ 5/8 2 51103191“ 1.0000 1.1/2 4“ 5/8 2 51103201“ 1.0000 1.1/2 4.1/8 7/8 2 51103231“ 1.0000 1.5/8 4.1/2 1“ 2 51103261“ 1.0000 1.1/2 4.1/8 3/4 2 51107101.1/8 1.1250 1.5/8 4.1/4 3/4 2 51117141.1/8 1.1250 1.5/8 4.1/4 7/8 2 51103241.1/8 1.1250 1.5/8 4.1/2 1“ 2 51103271.1/4 1.2500 1.5/8 4.1/2 1“ 2 51103281.1/4 1.2500 1.5/8 4.1/2 1.1/4 2 51103311.1/4 1.2500 1.5/8 4.1/4 7/8 2 51103251.1/4 1.2500 1.5/8 4.1/4 3/4 2 51117151.3/8 1.3750 1.5/8 4.1/4 3/4 2 51117161.3/8 1.3750 1.5/8 4.1/2 1“ 2 51103291.1/2 1.5000 1.5/8 4.1/2 1“ 2 51103301.1/2 1.5000 1.5/8 4.1/2 1.1/4 2 5110332 1.1/2 1.5000 1.5/8 4.1/4 3/4 2 51117171.3/4 1.7500 1.1/2 3.7/8 3/4 2 51117181.3/4 1.7500 1.5/8 4.1/2 1.1/4 2 51103342“ 2.0000 1.5/8 4.1/2 1.1/4 2 51103362 2.0000 1.1/2 3.7/8 3/4 2 5111719



920K

920K

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 2 51107153/16 0.1875 7/16 2.3/8 3/8 2 51107161/4 0.2500 1/2 2.7/16 3/8 2 51107175/16 0.3125 9/16 2.1/2 3/8 2 51107183/8 0.3750 9/16 2.1/2 3/8 2 51107191/2 0.5000 1“ 3.1/4 1/2 2 51107205/8 0.6250 1.5/16 3.3/4 5/8 2 51107213/4 0.7500 1.5/16 3.7/8 3/4 2 51107227/8 0.8750 1.1/2 4.1/8 7/8 2 51107231“ 1.0000 1.5/8 4.1/2 1“ 2 51107241.1/4 1.2500 1.5/8 4.1/2 1.1/4 2 51107251.1/2 1.5000 1.5/8 4.1/2 1.1/4 2 5110726

● End Mill ● Fraises à rainurer les clavettes ● Fresas de ranurar● 2-flute, keyway, regular length


TN920

TN920

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 2 51603023/16 0.1875 7/16 2.3/8 3/8 2 51603031/4 0.2500 1/2 2.7/16 3/8 2 51603045/16 0.3125 9/16 2.1/2 3/8 2 51603053/8 0.3750 9/16 2.1/2 3/8 2 51603067/16 0.4375 13/16 2.11/16 3/8 2 51603071/2 0.5000 13/16 2.11/16 3/8 2 51603081/2 0.5000 1“ 3.1/4 1/2 2 51603099/16 0.5625 1.1/8 3.3/8 1/2 2 51603105/8 0.6250 1.1/8 3.3/8 1/2 2 51603115/8 0.6250 1.5/16 3.3/4 5/8 2 516031411/16 0.6875 1.5/16 3.3/4 5/8 2 516031511/16 0.6875 1.5/16 3.5/8 1/2 2 51603123/4 0.7500 1.5/16 3.5/8 1/2 2 51603133/4 0.7500 1.5/16 3.3/4 5/8 2 51603163/4 0.7500 1.5/16 3.7/8 3/4 2 516070813/16 0.8125 1.1/2 4“ 5/8 2 51603177/8 0.8750 1.1/2 4“ 5/8 2 51603187/8 0.8750 1.1/2 4.1/8 7/8 2 51603217/8 0.8750 1.1/2 4.1/8 3/4 2 516070915/16 0.9375 1.1/2 4“ 5/8 2 51603191“ 1.0000 1.1/2 4“ 5/8 2 51603201“ 1.0000 1.1/2 4.1/8 7/8 2 51603231“ 1.0000 1.5/8 4.1/2 1“ 2 51603261“ 1.0000 1.1/2 4.1/8 3/4 2 51607101.1/8 1.1250 1.5/8 4.1/4 3/4 2 51617141.1/8 1.1250 1.5/8 4.1/4 7/8 2 51603241.1/8 1.1250 1.5/8 4.1/2 1“ 2 51603271.1/4 1.2500 1.5/8 4.1/2 1“ 2 51603281.1/4 1.2500 1.5/8 4.1/2 1.1/4 2 51603311.1/4 1.2500 1.5/8 4.1/4 7/8 2 51603251.1/4 1.2500 1.5/8 4.1/4 3/4 2 51617151.3/8 1.3750 1.5/8 4.1/4 3/4 2 51617161.3/8 1.3750 1.5/8 4.1/2 1“ 2 5160329


1.1/2 1.5000 1.5/8 4.1/4 3/4 2 51617171.3/4 1.7500 1.1/2 3.7/8 3/4 2 51617181.3/4 1.7500 1.5/8 4.1/2 1.1/4 2 51603342“ 2.0000 1.5/8 4.1/2 1.1/4 2 51603362“ 2.0000 1.1/2 3.7/8 3/4 2 5161719


905

921

905

■ ●

d1ØInch

d1decimalInch

l2Inch

l1inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 2 51103903/16 0.1875 1/2 2.3/8 3/8 2 51103911/4 0.2500 5/8 2.7/16 3/8 2 51103925/16 0.3125 3/4 2.1/2 3/8 2 51103933/8 0.3750 3/4 2.1/2 3/8 2 51103947/16 0.4375 1“ 3.1/4 1/2 2 51103951/2 0.5000 1“ 3.1/4 1/2 2 51103969/16 0.5625 1.1/8 3.3/8 1/2 2 51107005/8 0.6250 1.1/8 3.3/8 1/2 2 51107015/8 0.6250 1.3/8 3.3/4 5/8 2 51103973/4 0.7500 1.5/8 3.7/8 3/4 2 51103983/4 0.7500 1.5/16 3.5/8 1/2 2 51107027/8 0.8750 1.7/8 4.1/8 3/4 2 51107037/8 0.8750 2“ 4.1/4 7/8 2 51103991“ 1.0000 2.1/4 4.3/4 1“ 2 51104001“ 1.0000 2.1/4 4.1/2 3/4 2 51107041.1/8 1.1250 2.1/4 4.3/4 1“ 2 51104011.1/4 1.2500 2.1/2 5“ 1.1/4 2 51104021.1/2 1.5000 2.1/2 5“ 1.1/4 2 5110403


921

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

3/8 0.3750 1.1/2 3.1/4 3/8 2 51103371/2 0.5000 1.7/8 4“ 1/2 2 51103385/8 0.6250 2“ 4.1/8 5/8 2 51103393/4 0.7500 2.1/4 4.1/2 3/4 2 51103401“ 1.0000 3“ 5.1/2 1“ 2 5110342

● 2-flute, keyway, long length● End Mill ● Fraises de finition ● Fresas de acabado


TN921

TN921

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

3/8 0.3750 1.1/2 3.1/4 3/8 2 51603371/2 0.5000 1.7/8 4“ 1/2 2 51603385/8 0.6250 2“ 4.1/8 5/8 2 51603393/4 0.7500 2.1/4 4.1/2 3/4 2 51603401“ 1.0000 3“ 5.1/2 1“ 2 5160342

922

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 3.1/16 3/8 2 51103525/16 0.3125 3/4 3.1/8 3/8 2 51103533/8 0.3750 3/4 3.1/4 3/8 2 51103541/2 0.5000 1“ 4“ 1/2 2 51103555/8 0.6250 1.3/8 4.5/8 5/8 2 51103563/4 0.7500 1.5/8 5.1/4 3/4 2 51103577/8 0.8750 2“ 6“ 7/8 2 51103581“ 1.0000 2.1/2 7.1/4 1“ 2 51103591.1/4 1.2500 3“ 7.1/4 1.1/4 2 5110360

● 2-flute, long length

922● End Mill ● Fraises de finition ● Fresas de acabado

● 2-flute, long length● End Mill ● Fraises de finition ● Fresas de acabado


980

980

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 5/8 2.7/16 3/8 2 51106025/16 0.3125 3/4 2.1/2 3/8 2 51106033/8 0.3750 3/4 2.1/2 3/8 2 51106047/16 0.4375 1“ 2.11/16 3/8 2 51106051/2 0.5000 1.1/4 3.1/4 1/2 2 51106065/8 0.6250 1.5/8 3.3/4 5/8 2 51106073/4 0.7500 1.5/8 3.7/8 3/4 2 51106081“ 1.0000 2“ 4.1/2 1“ 2 5110609

● 2-flute, regular length

981

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/16 3/8 2 51106135/16 0.3125 1.3/8 3.1/8 3/8 2 51106143/8 0.3750 1.1/2 3.1/4 3/8 2 51106157/16 0.4375 1.3/4 3.3/4 1/2 2 51106161/2 0.5000 2“ 4“ 1/2 2 51106175/8 0.6250 2.1/2 4.5/8 5/8 2 51106183/4 0.7500 3“ 5.1/4 3/4 2 51106191“ 1.0000 4“ 6.1/2 1“ 2 5110620


981



982

● Fraises à rainurer

982

■ ●d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.3/4 3.9/16 3/8 2 51106245/16 0.3125 2“ 3.3/4 3/8 2 51106253/8 0.3750 2.1/2 4.1/4 3/8 2 51106261/2 0.5000 3“ 5“ 1/2 2 51106275/8 0.6250 4“ 6.1/8 5/8 2 51106283/4 0.7500 4“ 6.1/4 3/4 2 51106291“ 1.0000 6“ 8.1/2 1“ 2 5110630

● End Mill ● Fraises de finition ● Fresas de acabado● 2-flute, extra length

923

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 2 51103645/32 0.1562 7/16 3.1/8 3/8 2 51103653/16 0.1875 7/16 3.1/4 3/8 2 51103667/32 0.2188 1/2 3.1/4 3/8 2 51103671/4 0.2500 1/2 3.3/8 3/8 2 51103689/32 0.2812 9/16 3.3/8 3/8 2 51103695/16 0.3125 9/16 3.1/2 3/8 2 511037011/32 0.3438 9/16 3.1/2 3/8 2 51103713/8 0.3750 9/16 3.1/2 3/8 2 511037213/32 0.4062 13/16 4.1/8 1/2 2 51103737/16 0.4375 13/16 4.1/8 1/2 2 511037415/32 0.4688 13/16 4.1/8 1/2 2 51103751/2 0.5000 13/16 4.1/8 1/2 2 51103769/16 0.5625 1.1/8 5“ 5/8 2 51103775/8 0.6250 1.1/8 5“ 5/8 2 511037811/16 0.6875 1.5/16 5.5/8 3/4 2 51103793/4 0.7500 1.5/16 5.5/8 3/4 2 511038013/16 0.8125 1.9/16 6.1/8 7/8 2 51103817/8 0.8750 1.9/16 6.1/8 7/8 2 511038215/16 0.9375 1.5/8 6.3/8 1“ 2 51103831“ 1.0000 1.5/8 6.3/8 1“ 2 5110384

923● End Mill ● Fresas Frontales● 2-flute, regular length


TN923 - 907

● Fraises de finition bout hémisphérique - Double

TN923

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 2 51603645/32 0.1562 7/16 3.1/8 3/8 2 51603653/16 0.1875 7/16 3.1/4 3/8 2 51603667/32 0.2188 1/2 3.1/4 3/8 2 51603671/4 0.2500 1/2 3.3/8 3/8 2 51603689/32 0.2812 9/16 3.3/8 3/8 2 51603695/16 0.3125 9/16 3.1/2 3/8 2 516037011/32 0.3438 9/16 3.1/2 3/8 2 51603713/8 0.3750 9/16 3.1/2 3/8 2 516037213/32 0.4062 13/16 4.1/8 1/2 2 51603737/16 0.4375 13/16 4.1/8 1/2 2 516037415/32 0.4688 13/16 4.1/8 1/2 2 51603751/2 0.5000 13/16 4.1/8 1/2 2 51603769/16 0.5625 1.1/8 5“ 5/8 2 51603775/8 0.6250 1.1/8 5“ 5/8 2 516037811/16 0.6875 1.5/16 5.5/8 3/4 2 51603793/4 0.7500 1.5/16 5.5/8 3/4 2 51603807/8 0.8750 1.9/16 6.1/8 7/8 2 51603821“ 1.0000 1.5/8 6.3/8 1“ 2 5160384

● End Mill ● Fraises à rainurer ● Fresas Frontales● 2-flute, regular length

907

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 2 51104163/16 0.1875 7/16 3.1/4 3/8 2 51104171/4 0.2500 1/2 3.3/8 3/8 2 51104185/16 0.3125 9/16 3.1/2 3/8 2 51104193/8 0.3750 9/16 3.1/2 3/8 2 51104207/16 0.4375 13/16 4.1/8 1/2 2 51104211/2 0.5000 13/16 4.1/8 1/2 2 51104225/8 0.6250 1.1/8 5“ 5/8 2 51104233/4 0.7500 1.5/16 5.5/8 3/4 2 51104241“ 1.0000 1.5/8 6.3/8 1“ 2 5110426

● End Mill ● Fresas con punta esferica - Doble final● 2-flute, ball nose, double end, regular length


930

930

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 3 51102213/16 0.1875 1/2 2.3/8 3/8 3 51102221/4 0.2500 5/8 2.7/16 3/8 3 51102235/16 0.3125 3/4 2.1/2 3/8 3 51102243/8 0.3750 3/4 2.1/2 3/8 3 51102257/16 0.4375 1“ 2.11/16 3/8 3 51102261/2 0.5000 1“ 2.11/16 3/8 3 51102271/2 0.5000 1.1/4 3.1/4 1/2 3 51102289/16 0.5625 1.3/8 3.3/8 1/2 3 51102295/8 0.6250 1.3/8 3.3/8 1/2 3 51102305/8 0.6250 1.5/8 3.3/4 5/8 3 51102323/4 0.7500 1.5/8 3.5/8 1/2 3 51102313/4 0.7500 1.5/8 3.3/4 5/8 3 51102333/4 0.7500 1.5/8 3.7/8 3/4 3 51106967/8 0.8750 1.7/8 4.1/8 3/4 3 51106971“ 1.0000 1.7/8 4.1/8 3/4 3 51106981“ 1.0000 1.7/8 4“ 5/8 3 51102351“ 1.0000 2“ 4.1/2 1“ 3 51102371.1/8 1.1250 2“ 4.1/2 1“ 3 51102381.1/4 1.2500 2“ 4.1/2 1“ 3 51102391.1/4 1.2500 2“ 4.1/2 1.1/4 3 51102401.1/2 1.5000 2“ 4.1/2 1.1/4 3 51102411.3/4 1.7500 2“ 4.1/2 1.1/4 3 51102422“ 2.0000 2“ 4.1/2 1.1/4 3 5110243



931

931

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/16 3/8 3 51102445/16 0.3125 1.3/8 3.1/8 3/8 3 51102453/8 0.3750 1.1/2 3.1/4 3/8 3 51102467/16 0.4375 1.3/4 3.3/4 1/2 3 51102471/2 0.5000 2“ 4“ 1/2 3 51102485/8 0.6250 2.1/2 4.5/8 5/8 3 51102493/4 0.7500 3“ 5.1/4 3/4 3 51102501“ 1.0000 4“ 6.1/2 1“ 3 5110252

933

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 3 51102573/16 0.1875 1/2 3.1/4 3/8 3 51102581/4 0.2500 5/8 3.3/8 3/8 3 51102595/16 0.3125 3/4 3.1/2 3/8 3 51102603/8 0.3750 3/4 3.1/2 3/8 3 51102617/16 0.4375 1“ 4.1/8 1/2 3 51102621/2 0.5000 1“ 4.1/8 1/2 3 51102639/16 0.5625 1.3/8 5“ 5/8 3 51102645/8 0.6250 1.3/8 5“ 5/8 3 51102653/4 0.7500 1.5/8 5.5/8 3/4 3 51102661“ 1.0000 1.7/8 6.3/8 1“ 3 5110268

933



● 3-flute, long length



940

940

■●

d1ØInch

d1decimalInch

l1Inch

l2Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 2.5/16 3/8 3/8 4 51100013/16 0.1875 2.3/8 1/2 3/8 4 51100021/4 0.2500 2.7/16 5/8 3/8 4 51100035/16 0.3125 2.1/2 3/4 3/8 4 51100043/8 0.3750 2.1/2 3/4 3/8 4 51100057/16 0.4375 2.11/16 1“ 3/8 4 51100061/2 0.5000 2.11/16 1“ 3/8 4 51100071/2 0.5000 3.1/4 1.1/4 1/2 4 51100089/16 0.5625 3.3/8 1.3/8 1/2 4 51100095/8 0.6250 3.3/8 1.3/8 1/2 4 51100105/8 0.6250 3.3/4 1.5/8 5/8 4 511001311/16 0.6875 3.5/8 1.5/8 1/2 4 511001111/16 0.6875 3.3/4 1.5/8 5/8 4 51100143/4 0.7500 3.5/8 1.5/8 1/2 4 51100123/4 0.7500 3.3/4 1.5/8 5/8 4 51100153/4 0.7500 3.7/8 1.5/8 3/4 4 511071113/16 0.8125 4“ 1.7/8 5/8 6 51100167/8 0.8750 4“ 1.7/8 5/8 6 51100177/8 0.8750 4.1/8 1.7/8 3/4 4 51107127/8 0.8750 4.1/8 1.7/8 7/8 4 51100201“ 1“ 4“ 1.7/8 5/8 6 51100191“ 1“ 4.1/8 1.7/8 3/4 4 51107131“ 1“ 4.1/8 1.7/8 7/8 4 51100221“ 1“ 4.1/2 2“ 1“ 4 51100251.1/8 1.1250 4“ 1.3/4 3/4 6 51117201.1/8 1.1250 4.1/4 2“ 7/8 6 51100231.1/8 1.1250 4.1/2 2“ 1“ 6 51100261.1/4 1.2500 4“ 1.3/4 3/4 6 51117211.1/4 1.2500 4.1/4 2“ 7/8 6 51100241.1/4 1.2500 4.1/2 2“ 1“ 6 51100271.1/4 1.2500 4.1/2 2“ 1.1/4 6 51100301.3/8 1.3750 4.1/4 2“ 3/4 6 51117221.3/8 1.3750 4.1/2 2“ 1“ 6 51100281.1/2 1.5000 4.1/4 2“ 3/4 6 51117231.1/2 1.5000 4.1/2 2“ 1“ 6 51100291.1/2 1.3/4

1.5000 1.7500

4.1/2 3.7/8

2“ 1.1/2

1.1/4 3/4

6 6

5110031 5111724

1.3/4 1.7500 4.1/2 2“ 1.1/4 6 51100332“ 2“ 3.7/8 1.1/2 3/4 8 51117252“ 2“ 4.1/2 2“ 1.1/4 8 5110035

● End Mill ● Fraises de finition ● Fresas de acabado● Multi-flute, regular length


TN940

TN940

■●

d1ØInch

d1decimalInch

l1 Inch

l2Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 2.5/16 3/8 3/8 4 51600013/16 0.1875 2.3/8 1/2 3/8 4 51600021/4 0.2500 2.7/16 5/8 3/8 4 51600035/16 0.3125 2.1/2 3/4 3/8 4 51600043/8 0.3750 2.1/2 3/4 3/8 4 51600057/16 0.4375 2.11/16 1“ 3/8 4 51600061/2 0.5000 2.11/16 1“ 3/8 4 51600071/2 0.5000 3.1/4 1.1/4 1/2 4 51600089/16 0.5625 3.3/8 1.3/8 1/2 4 51600095/8 0.6250 3.3/8 1.3/8 1/2 4 51600105/8 0.6250 3.3/4 1.5/8 5/8 4 516001311/16 0.6875 3.3/4 1.5/8 5/8 4 516001411/16 0.6875 3.5/8 1.5/8 1/2 4 51600113/4 0.7500 3.5/8 1.5/8 1/2 4 51600123/4 0.7500 3.3/4 1.5/8 5/8 4 51600153/4 0.7500 3.7/8 1.5/8 3/4 4 516071113/16 0.8125 4“ 1.7/8 5/8 6 51600167/8 0.8750 4“ 1.7/8 5/8 6 51600177/8 0.8750 4.1/8 1.7/8 7/8 4 51600207/8 0.8750 4.1/8 1.7/8 3/4 4 51607121“ 1“ 4.1/8 1.7/8 3/4 4 51607131“ 1“ 4.1/8 1.7/8 7/8 4 51600221“ 1“ 4“ 1.7/8 5/8 6 51600191“ 1“ 4.1/2 2“ 1“ 4 51600251.1/8 1.1250 4.1/2 2“ 1“ 6 51600261.1/8 1.1250 4.1/4 2“ 7/8 6 51600231.1/8 1.1250 4“ 1.3/4 3/4 6 51617201.1/4 1.2500 4“ 1.3/4 3/4 6 51617211.1/4 1.2500 4.1/4 2“ 7/8 6 51600241.1/4 1.2500 4.1/2 2“ 1“ 6 51600271.1/4 1.2500 4.1/2 2“ 1.1/4 6 51600301.3/8 1.3750 4.1/2 2“ 1“ 6 51600281.3/8 1.3750 4.1/4 2“ 3/4 6 51617221.1/2 1.5000 4.1/4 2“ 3/4 6 51617231.1/2 1.5000 4.1/2 2“ 1“ 6 51600291.1/2 1.3/4 1.3/4 2“ 2“

1.5000 1.7500 1.7500 2“ 2“

4.1/2 4.1/2 3.7/8 3.7/8 4.1/2

2“ 2“ 1.1/2 1.1/2 2“

1.1/4 1.1/4 3/4 3/4 1.1/4

6 6 6 8 8

5160031 5160033 5161724 5161725 5160035



941 - 944

941

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/16 3/8 4 51100445/16 0.3125 1.3/8 3.1/8 3/8 4 51100453/8 0.3750 1.1/2 3.1/4 3/8 4 51100467/16 0.4375 1.3/4 3.3/4 1/2 4 51100471/2 0.5000 2“ 4“ 1/2 4 51100485/8 0.6250 2.1/2 4.5/8 5/8 4 51100493/4 0.7500 3“ 5.1/4 3/4 4 51100507/8 0.8750 3.1/2 5.3/4 7/8 4 51100511“ 1.0000 4“ 6.1/2 1“ 4 51100521.1/8 1.1250 4“ 6.1/2 1“ 6 51100531.1/4 1.2500 4“ 6.1/2 1“ 6 51100541.1/4 1.2500 4“ 6.1/2 1.1/4 6 51100571.1/2 1.5000 4“ 6.1/2 1.1/4 6 51100581.1/2 1.5000 4“ 6.1/2 1“ 6 51100561.3/4 1.7500 4“ 6.1/2 1.1/4 6 51100592“ 2.0000 4“ 6.1/2 1.1/4 6 5110060

944

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.3/4 3.9/16 3/8 4 51100615/16 0.3125 2“ 3.3/4 3/8 4 51100623/8 0.3750 2.1/2 4.1/4 3/8 4 51100631/2 0.5000 3“ 5“ 1/2 4 51100645/8 0.6250 4“ 6.1/8 5/8 4 51100653/4 0.7500 4“ 6.1/4 3/4 4 51100667/8 0.8750 5“ 7.1/4 7/8 4 51100671“ 1.0000 6“ 8.1/2 1“ 4 51100681.1/4 1.2500 6“ 8.1/2 1.1/4 6 51100691.1/2 1.5000 6“ 8.1/2 1.1/4 6 5110070


● End Mill ● Fraises de finition ● Fresas de acabado● Multi-flute, long length

● End Mill ● Fresas de acabado● Multi-flute, extra length


945 - TN945


945

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 4 51100713/16 0.1875 1/2 2.3/8 3/8 4 51100721/4 0.2500 5/8 2.7/16 3/8 4 51100735/16 0.3125 3/4 2.1/2 3/8 4 51100743/8 0.3750 3/4 2.1/2 3/8 4 51100751/2 0.5000 1.1/4 3.1/4 1/2 4 51100765/8 0.6250 1.5/8 3.3/4 5/8 4 511007711/16 0.6875 1.5/8 3.3/4 5/8 4 51100783/4 0.7500 1.5/8 3.7/8 3/4 4 51100797/8 0.8750 1.7/8 4.1/8 7/8 4 51100801“ 1.0000 2“ 4.1/2 1“ 4 51100811.1/8 1.1250 2“ 4.1/2 1“ 4 51100821.1/4 1.2500 2“ 4.1/2 1.1/4 4 51100831.1/2 1.5000 2“ 4.1/2 1.1/4 4 5110084


TN945

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 2.5/16 3/8 4 51600713/16 0.1875 1/2 2.3/8 3/8 4 51600721/4 0.2500 5/8 2.7/16 3/8 4 51600735/16 0.3125 3/4 2.1/2 3/8 4 51600743/8 0.3750 3/4 2.1/2 3/8 4 51600751/2 0.5000 1.1/4 3.1/4 1/2 4 51600765/8 0.6250 1.5/8 3.3/4 5/8 4 516007711/16 0.6875 1.5/8 3.3/4 5/8 4 51600783/4 0.7500 1.5/8 3.7/8 3/4 4 51600797/8 0.8750 1.7/8 4.1/8 7/8 4 51600801“ 1.0000 2“ 4.1/2 1“ 4 51600811.1/8 1.1250 2“ 4.1/2 1“ 4 51600821.1/4 1.2500 2“ 4.1/2 1.1/4 4 51600831.1/2 1.5000 2“ 4.1/2 1.1/4 4 5160084

● 4-flute, regular length● End Mill ● Fresas de acabado


900

900

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

3/8 0.3750 3/4 2.1/2 3/8 4 51101721/2 0.5000 1.1/4 3.1/4 1/2 4 51101735/8 0.6250 1.5/8 3.3/4 5/8 4 51101743/4 0.7500 1.5/8 3.7/8 3/4 4 51101757/8 0.8750 1.7/8 4.1/8 7/8 4 51101761“ 1.0000 2“ 4.1/2 1“ 4 51101771.1/4 1.2500 2“ 4.1/2 1.1/4 4 51101781.1/2 1.5000 2“ 4.1/2 1.1/4 4 5110179


946


946

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/16 3/8 4 51100855/16 0.3125 1.3/8 3.1/8 3/8 4 51100863/8 0.3750 1.1/2 3.1/4 3/8 4 51100871/2 0.5000 2“ 4“ 1/2 4 51100885/8 0.6250 2.1/2 4.5/8 5/8 4 51100893/4 0.7500 3“ 5.1/4 3/4 4 51100907/8 0.8750 3.1/2 5.3/4 7/8 4 51100911“ 1.0000 4“ 6.1/2 1“ 4 51100921.1/4 1.2500 4“ 6.1/2 1.1/4 4 5110093



TN946

TN946

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.1/4 3.1/16 3/8 4 51600855/16 0.3125 1.3/8 3.1/8 3/8 4 51600863/8 0.3750 1.1/2 3.1/4 3/8 4 51600871/2 0.5000 2“ 4“ 1/2 4 51600885/8 0.6250 2.1/2 4.5/8 5/8 4 51600893/4 0.7500 3“ 5.1/4 3/4 4 51600907/8 0.8750 3.1/2 5.3/4 7/8 4 51600911“ 1.0000 4“ 6.1/2 1“ 4 51600921.1/4 1.2500 4“ 6.1/2 1.1/4 4 5160093

901

901

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/2 0.5000 2“ 4“ 1/2 4 51101805/8 0.6250 2.1/2 4.5/8 5/8 4 51101813/4 0.7500 3“ 5.1/4 3/4 4 51101821“ 1.0000 4“ 6.1/2 1“ 4 5110183

● 4-flute, ball nose, long length● Fraises de finition bout hémisphérique● End Mill ● Fresas con punta esferica



947 - 943

947

■

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/4 0.2500 1.3/4 3.9/16 3/8 4 51100945/16 0.3125 2“ 3.3/4 3/8 4 51100953/8 0.3750 2.1/2 4.1/4 3/8 4 51100961/2 0.5000 3“ 5“ 1/2 4 51100975/8 0.6250 4“ 6.1/8 5/8 4 51100983/4 0.7500 4“ 6.1/4 3/4 4 51100997/8 0.8750 5“ 7.1/4 7/8 4 51101001“ 1.0000 6“ 8.1/2 1“ 4 51101011.1/4 1.2500 6“ 8.1/2 1.1/4 4 5110102

●

● End Mill● Fraises de finition ● Fresas de acabado● 4-flute, extra length

943

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 4 51101865/32 0.1563 7/16 3.1/4 3/8 4 51101873/16 0.1875 1/2 3.1/4 3/8 4 51101887/32 0.2188 9/16 3.1/4 3/8 4 51101891/4 0.2500 5/8 3.3/8 3/8 4 51101909/32 0.2813 11/16 3.3/8 3/8 4 51101915/16 0.3125 3/4 3.1/2 3/8 4 511019211/32 0.3438 3/4 3.1/2 3/8 4 51101933/8 0.3750 3/4 3.1/2 3/8 4 511019413/32 0.4063 1“ 4.1/8 1/2 4 51101957/16 0.4375 1“ 4.1/8 1/2 4 511019615/32 0.4688 1“ 4.1/8 1/2 4 51101971/2 0.5000 1“ 4.1/8 1/2 4 51101989/16 0.5625 1.3/8 5“ 5/8 4 51101995/8 0.6250 1.3/8 5“ 5/8 4 511020011/16 0.6875 1.5/8 5.5/8 3/4 4 51102013/4 0.7500 1.5/8 5.5/8 3/4 4 511020213/16 0.8125 1.7/8 6.1/8 7/8 4 51102037/8 0.8750 1.7/8 6.1/8 7/8 4 511020415/16 0.9375 1.7/8 6.3/8 1“ 4 51110431“ 1.0000 1.7/8 6.3/8 1“ 4 5110206



TN943

TN943

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 4 51601865/32 0.1563 7/16 3.1/4 3/8 4 51601873/16 0.1875 1/2 3.1/4 3/8 4 51601887/32 0.2188 9/16 3.1/4 3/8 4 51601891/4 0.2500 5/8 3.3/8 3/8 4 51601909/32 0.2813 11/16 3.3/8 3/8 4 51601915/16 0.3125 3/4 3.1/2 3/8 4 516019211/32 0.3438 3/4 3.1/2 3/8 4 51601933/8 0.3750 3/4 3.1/2 3/8 4 516019413/32 0.4063 1“ 4.1/8 1/2 4 51601957/16 0.4375 1“ 4.1/8 1/2 4 516019615/32 0.4688 1“ 4.1/8 1/2 4 51601971/2 0.5000 1“ 4.1/8 1/2 4 51601989/16 0.5625 1.3/8 5“ 5/8 4 51601995/8 0.6250 1.3/8 5“ 5/8 4 516020011/16 0.6875 1.5/8 5.5/8 3/4 4 51602013/4 0.7500 1.5/8 5.5/8 3/4 4 516020213/16 0.8125 1.7/8 6.1/8 7/8 4 51602037/8 0.8750 1.7/8 6.1/8 7/8 4 51602041“ 1.0000 1.7/8 6.3/8 1“ 4 5160206



948

948

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 4 51101623/16 0.1875 1/2 3.1/4 3/8 4 51101631/4 0.2500 5/8 3.3/8 3/8 4 51101645/16 0.3125 3/4 3.1/2 3/8 4 51101653/8 0.3750 3/4 3.1/2 3/8 4 51101661/2 0.5000 1“ 4.1/2 1/2 4 51101675/8 0.6250 1.3/8 5“ 5/8 4 51101683/4 0.7500 1.5/8 5.5/8 3/4 4 51101697/8 0.8750 1.7/8 6.1/8 7/8 4 51101701“ 1.0000 1.7/8 6.3/8 1“ 4 5110171

TN948

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/8 0.1250 3/8 3.1/16 3/8 4 51601623/16 0.1875 1/2 3.1/4 3/8 4 51601631/4 0.2500 5/8 3.3/8 3/8 4 51601645/16 0.3125 3/4 3.1/2 3/8 4 51601653/8 0.3750 3/4 3.1/2 3/8 4 51601661/2 0.5000 1“ 4.1/2 1/2 4 51601675/8 0.6250 1.3/8 5“ 5/8 4 51601683/4 0.7500 1.5/8 5.5/8 3/4 4 51601697/8 0.8750 1.7/8 6.1/8 7/8 4 51601701“ 1.0000 1.7/8 6.3/8 1“ 4 5160171

TN948



911

911

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/32 0.0313 3/32 2.1/4 3/16 2 51107143/64 0.0469 9/64 2.1/4 3/16 2 51104891/16 0.0625 3/16 2.1/4 3/16 2 51104905/64 0.0781 15/64 2.1/4 3/16 2 51104913/32 0.0938 9/32 2.1/4 3/16 2 51104927/64 0.1094 21/64 2.1/4 3/16 2 51104931/8 0.1250 3/8 2.1/4 3/16 2 51104949/64 0.1406 13/32 2.1/4 3/16 2 51104955/32 0.1563 7/16 2.1/4 3/16 2 511049611/64 0.1719 1/2 2.1/4 3/16 2 51104973/16 0.1875 1/2 2.1/4 3/16 2 5110498

917

■●d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/16 0.0625 3/16 2.1/4 3/16 4 51105373/32 0.0938 9/32 2.1/4 3/16 4 51105381/8 0.1250 3/8 2.1/4 3/16 4 51105395/32 0.1563 7/16 2.1/4 3/16 4 51105403/16 0.1875 1/2 2.1/4 3/16 4 5110541

917

● 2-flute, miniature, double end, regular length● End Mill ● Fraises de finition - Double ● Fresas de acabado - Doble final

● 4-flute, miniature, double end, regular length● End Mill ● Fraises de finition - Double ● Fresas de acabado - Doble final


● Corner Rounding Cutter ● Fraises concaves ● Fresas frontales de perfi l cóncavo

919

919

■●

d1ØInch

d1decimalInch

l2Inch

l1Inch

d2ØInch # Flutes

EDP #ore-Code

1/16 0.0625 7/32 2.1/2 3/16 4 51105463/32 0.0938 9/32 2.5/8 3/16 4 51105471/8 0.1250 3/4 3.1/8 3/16 4 51105485/32 0.1563 7/8 3.1/4 3/16 4 51105493/16 0.1875 1“ 3.3/8 3/16 4 5110550

883

■

●

RInch

d1ØInch

d2ØInch

l1Inch # Flutes

EDP #ore-Code

883

● 4-flute, double end, miniature, long length

1/16 7/16 3/8 2.1/2 4 5110686

1/2 1.1/2 1“ 4.1/8 4 5110695

3/32 1/2 3/8 2.1/2 4 51106871/8 5/8 1/2 3“ 4 51106885/32 3/4 1/2 3“ 4 51106893/16 7/8 3/4 3.1/8 4 51106901/4 1.000 3/4 3.1/4 4 51106915/16 1.1/8 7/8 3.1/2 4 51106923/8 1.1/4 7/8 3.3/4 4 51106937/16 1.3/8 1“ 4“ 4 5110694

● End Mill ● Fraises de finition - Double ● Fresas de acabado - Doble final


C191

C191

■●

d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flutes

StockNo.

EDP #ore-Code

1.50 6.00 2.5 48.5 2 0412336 C1911.51/16 1.59 6.35 - 1/4 2.5 48.5 2 0412404 C1911/16 1)

5/64 1.98 6.35 - 1/4 2.5 49.0 2 0413043 C1915/64 1)

2.00 6.00 3.0 49.0 2 0412626 C1912.03/32 2.38 6.35 - 1/4 4.5 51.0 2 0412886 C1913/32 1)

2.50 6.00 4.5 51.0 2 0412633 C1912.57/64 2.78 6.35 - 1/4 6.5 51.0 2 0413128 C1917/64 1)

3.00 6.00 7.0 51.0 2 0412824 C1913.01/8 3.18 6.35 - 1/4 7.0 51.0 2 0412572 C1911/8 1)

3.50 6.00 7.5 52.5 2 0412831 C1913.59/64 3.57 6.35 - 1/4 9.5 52.5 2 0413203 C1919/64 1)

5/32 3.97 6.35 - 1/4 9.5 52.5 2 0413036 C1915/32 1)

4.00 6.00 9.5 52.5 2 0412954 C1914.011/64 4.37 6.35 - 1/4 9.5 52.5 2 0412411 C19111/64 1)

4.50 6.00 9.5 52.5 2 0412961 C1914.53/16 4.76 6.35 - 1/4 9.5 52.5 2 0412855 C1913/16 1)

5.00 6.00 9.5 52.5 2 0412992 C1915.013/64 5.16 6.35 - 1/4 11.0 55.5 2 0412473 C19113/64 1)

5.50 6.00 11.0 55.5 2 0413005 C1915.57/32 5.56 6.35 - 1/4 11.0 55.5 2 0413111 C1917/32 1)

15/64 5.95 6.35 - 1/4 11.0 56.5 2 0412527 C19115/64 1)

6.00 6.00 11.0 56.5 2 0413067 C1916.01/4 6.35 6.35 - 1/4 11.0 56.5 2 0412480 C1911/4 1)

6.50 10.00 11.0 58.5 2 0413074 C1916.517/64 6.75 9.53 - 3/8 11.0 59.5 2 0412565 C19117/64 1)

7.00 10.00 11.0 58.5 2 0413081 C1917.09/32 7.14 9.53 - 3/8 11.0 58.5 2 0413197 C1919/32 1)

7.50 10.00 11.0 58.5 2 0413098 C1917.519/64 7.54 9.53 - 3/8 12.5 58.5 2 0412619 C19119/64 1)

5/16 7.94 9.53 - 3/8 12.5 59.5 2 0413029 C1915/16 1)

8.00 10.00 12.5 59.5 2 0413142 C1918.021/64 8.33 9.53 - 3/8 14.5 59.5 2 0412688 C19121/64 1)

8.50 10.00 14.5 60.5 2 0413159 C1918.511/32 8.73 9.53 - 3/8 14.5 60.5 2 0412398 C19111/32 1)

9.00 10.00 14.5 60.5 2 0413166 C1919.023/64 9.13 9.53 - 3/8 14.5 60.5 2 0412725 C19123/64 1)

● Fraises à rainurer● Slot Drill ● Fresas Frontales


C191d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flutes

StockNo.

EDP #ore-Code

9.50 10.00 14.5 60.5 2 0413173 C1919.53/8 9.53 9.53 - 3/8 14.5 60.5 2 0412930 C1913/8 1)

25/64 9.92 9.53 - 3/8 16.0 60.5 2 0412756 C19125/64 1)

10.00 10.00 14.5 60.5 2 0412343 C19110.013/32 10.32 9.53 - 3/8 16.0 60.5 2 0412466 C19113/32 1)

10.50 12.00 17.5 65.0 2 0412350 C19110.527/64 10.72 12.70 - 1/2 17.5 65.0 2 0412787 C19127/64 1)

11.00 12.00 17.5 65.0 2 0412367 C19111.07/16 11.11 12.70 - 1/2 17.5 65.0 2 0413104 C1917/16 1)

11.50 12.00 17.5 65.0 2 0412374 C19111.529/64 11.51 12.70 - 1/2 17.5 65.0 2 0412817 C19129/64 1)

12.00 12.00 19.0 66.5 2 0412435 C19112.031/64 12.30 12.70 - 1/2 19.0 66.5 2 0412862 C19131/64 1)

1/2 12.70 12.70 - 1/2 19.0 66.5 2 0412428 C1911/2 1)

13.00 12.00 19.0 66.5 2 0412442 C19113.017/32 13.49 12.70 - 1/2 22.0 68.5 2 0412558 C19117/32 2)

14.00 12.00 22.0 68.5 2 0412497 C19114.09/16 14.29 12.70 - 1/2 21.5 69.0 2 0413180 C1919/16 2)

15.00 16.00 22.0 72.0 2 0412503 C19115.019/32 15.08 15.88 - 5/8 22.0 72.0 2 0412602 C19119/32 2)

5/8 15.88 15.88 - 5/8 22.0 72.0 2 0413050 C1915/8 2)

16.00 16.00 22.0 72.0 2 0412534 C19116.021/32 16.67 15.88 - 5/8 24.0 73.0 2 0412671 C19121/32 2)

17.00 16.00 24.0 74.0 2 0412541 C19117.011/16 17.46 15.88 - 5/8 24.0 74.0 2 0412381 C19111/16 2)

18.00 16.00 24.0 74.0 2 0412589 C19118.023/32 18.26 15.88 - 5/8 25.5 75.5 2 0412718 C19123/32 2)

19.00 16.00 25.5 77.0 2 0412596 C19119.03/4 19.05 15.88 - 5/8 25.5 77.0 2 0412893 C1913/4 2)

20.00 16.00 25.5 77.0 2 0412657 C19120.013/16 20.64 25.40 - 1 25.4 98.5 2 0412459 C19113/16 2)

21.00 25.00 25.5 98.5 2 0412664 C19121.022.00 25.00 25.5 100.0 2 0412695 C19122.0

7/8 22.23 25.40 - 1 25.5 100.0 2 0413135 C1917/8 2)

23.00 25.00 25.5 101.5 2 0412701 C19123.015/16 23.81 25.40 - 1 25.5 103.0 2 0412510 C19115/16 2)

24.00 25.00 25.5 103.0 2 0412732 C19124.025.00 25.00 27.0 95.0 2 0412749 C19125.0

1 25.40 25.40 - 1 27.0 95.0 2 0412237 C1911 2)

26.00 25.00 27.0 95.0 2 0412763 C19126.01.1/16 26.99 25.40 - 1 28.5 93.5 2 0412244 C1911.1/16 2)

27.00 25.00 28.5 93.5 2 0412770 C19127.028.00 25.00 30.0 95.0 2 0412794 C19128.0

1.1/8 28.58 25.40 - 1 30.0 95.0 2 0412299 C1911.1/8 2)

29.00 25.00 30.0 93.5 2 0412800 C19129.030.00 25.00 30.0 93.5 2 0412848 C19130.0

1.1/4 31.75 25.40 - 1 38.0 101.5 2 0412275 C1911.1/4X1 2)

1.1/4 31.75 31.75 - 1.1/4 35.0 117.5 2 0412282 C1911.1/4X1.1/4 2)

32.00 25.00 38.0 101.5 2 0412879 C19132.0X25.034.00 25.00 38.0 101.5 2 0412909 C19134.0X25.0

1.3/8 34.93 25.40 - 1 39.5 103.0 2 0412312 C1911.3/8X1 2)

35.00 25.00 39.5 103.0 2 0412916 C19135.0X25.036.00 25.00 39.5 103.0 2 0412923 C19136.0X25.038.00 25.00 43.0 106.5 2 0412947 C19138.0X25.0


1) diameter tolerance -.0005 inches / -.0013 inches / tolérance sur le diamètre -.0005 inches / -.0013 inches / Tolerancia diámetro -.0005 pulgadas/ - .0013 pulgadas2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas


C191 - C192d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flutes

StockNo.

EDP #ore-Code

1.1/2 38.10 25.40 - 1 43.0 106.5 2 0412251 C1911.1/2X1 2)

1.1/2 38.10 31.75 - 1.1/4 43.0 114.5 2 0412268 C1911.1/2X1.1/4 2)

40.00 25.00 46.0 111.0 2 0412978 C19140.0X25.01.5/8 41.28 25.40 - 1 47.5 112.5 2 0412329 C1911.5/8X1 2)

1.3/4 44.45 25.40 - 1 51.0 116.0 2 0412305 C1911.3/4X1 2)

45.00 25.00 51.0 116.0 2 0412985 C19145.0X25.050.00 32.00 51.0 117.5 2 0413012 C19150.0X32.0

2“ 50.80 25.40 - 1 57.0 122.0 2 0412640 C1912X1 2)

C192

C192

■

●

d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flt

StockNo.

EDP #ore-Code

1/16 1.59 6.35 - 1/4 4.5 51.0 2 0413289 C1921/16 1)

2.00 6.0 4.0 51.0 2 0413418 C1922.03.00 6.0 11.0 60.5 2 0413487 C1923.0

1/8 3.18 6.35 - 1/4 11.0 63.5 2 0413388 C1921/8 1)

5/32 3.97 6.35 - 1/4 12.5 70.0 2 0413562 C1925/32 1)

4.00 6.0 12.5 66.5 2 0413531 C1924.03/16 4.76 6.35 - 1/4 12.5 70.0 2 0413500 C1923/16 1)

5.00 6.0 12.5 70.0 2 0413548 C1925.06.00 6.0 16.0 76.0 2 0413586 C1926.0

1/4 6.35 6.35 - 1/4 16.0 76.0 2 0413333 C1921/4 1)

6.50 10.0 16.0 76.0 2 0413593 C1926.57.00 10.0 16.0 76.0 2 0413609 C1927.0

9/32 7.14 9.53 - 3/8 16.0 76.0 2 0413685 C1929/32 1)

7.50 10.0 16.0 76.0 2 0413616 C1927.55/16 7.94 9.53 - 3/8 19.0 79.5 2 0413555 C1925/16 1)

8.00 10.0 19.0 79.5 2 0413647 C1928.08.50 10.0 22.0 82.5 2 0413654 C1928.5

11/32 8.73 9.53 - 3/8 22.0 82.5 2 0413272 C19211/32 1)

9.00 10.0 22.0 82.5 2 0413661 C1929.03/8 9.53 9.53 - 3/8 22.0 82.5 2 0413524 C1923/8 1)

10.00 10.0 22.0 82.5 2 0413258 C19210.013/32 10.32 9.53 - 3/8 22.2 89.0 2 0413326 C19213/32 1)

11.00 12.0 22.0 89.0 2 0413265 C19211.07/16 11.11 12.7 - 1/2 22.0 89.0 2 0413623 C1927/16 1)

d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flt

StockNo.

EDP #ore-Code

12.00 12.0 25.5 95.0 2 0413302 C19212.01/2 12.70 12.7 - 1/2 25.5 95.0 2 0413296 C1921/2 1)

13.00 12.0 25.5 95.0 2 0413319 C19213.014.00 12.0 28.5 101.5 2 0413340 C19214.0

9/16 14.29 12.7 - 1/2 28.5 101.5 2 0413678 C1929/16 2)

15.00 16.0 31.5 108.0 2 0413357 C19215.05/8 15.88 15.88 -

5/831.5 108.0 2 0413579 C1925/8 2)

16.00 16.0 31.5 108.0 2 0413364 C19216.017.00 16.0 35.0 114.5 2 0413371 C19217.018.00 16.0 35.0 114.5 2 0413395 C19218.019.00 16.0 38.0 120.5 2 0413401 C19219.0

3/4 19.05 15.88 - 5/8

38.0 120.7 2 0413517 C1923/4 2)

20.00 16.0 38.0 120.5 2 0413425 C19220.022.00 25.0 41.5 140.0 2 0413432 C19222.0

7/8 22.23 25.4 - 1 41.5 139.7 2 0413630 C1927/8 2)

24.00 25.0 41.5 152.5 2 0413449 C19224.025.00 25.0 44.5 159.0 2 0413456 C19225.0

1“ 25.40 25.4 - 1 44.5 159.0 2 0413210 C1921 2)

26.00 25.0 44.5 159.0 2 0413463 C19226.028.00 25.0 47.5 159.0 2 0413470 C19228.030.00 25.0 51.0 159.0 2 0413494 C19230.0

1.1/8 28.58 25.4 - 1 47.5 159.0 2 0413241 C1921.1/8 2)


2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas




C291

C291

■

●

d1ØInch

d1Ømm

l2

mm

d2Ømm

l1

mm#Flutes

StockNo.

EDP #ore-Code

1/16 1.59 2.5 6.35 - 1/4 48.5 2 0413791 C2911/16 1)

2.00 3.0 6.0 49.0 2 0413920 C2912.0 1)

3/32 2.38 6.5 6.35 - 1/4 51.0 4 0414095 C2913/32 1)

2.50 6.5 6.0 51.0 4 0413937 C2912.5 1)

3.00 9.5 6.0 54.0 4 0414040 C2913.0 1)

1/8 3.18 9.5 6.35 - 1/4 54.0 4 0413890 C2911/8 1)

3.50 12.5 6.0 57.0 4 0414057 C2913.5 1)

5/32 3.97 12.5 6.35 - 1/4 57.0 4 0414255 C2915/32 1)

4.00 12.5 6.0 57.0 4 0414163 C2914.0 1)

4.50 12.5 6.0 57.0 4 0414170 C2914.5 1)

3/16 4.76 12.5 6.35 - 1/4 57.0 4 0414071 C2913/16 1)

5.00 16.0 6.0 60.5 4 0414217 C2915.0 1)

5.50 16.0 6.0 60.5 4 0414224 C2915.5 1)

6.00 16.0 6.0 60.5 4 0414279 C2916.0 1)

1/4 6.35 16.0 6.35 - 1/4 60.5 4 0413845 C2911/4 1)

6.50 16.0 10.0 60.5 4 0414286 C2916.5 1)

7.00 15.0 10.0 60.5 4 0414293 C2917.0 1)

7.50 18.0 10.0 63.5 4 0414309 C2917.5 1)

5/16 7.94 18.0 9.53 - 3/8 63.5 4 0414248 C2915/16 1)

8.00 18.0 10.0 63.5 4 0414330 C2918.0 1)

8.50 21.0 10.0 66.5 4 0414347 C2918.5 1)

9.00 21.0 10.0 66.5 4 0414354 C2919.0 1)

9.50 21.0 10.0 66.5 4 0414361 C2919.5 1)

3/8 9.53 21.0 9.53 - 3/8 66.5 4 0414149 C2913/8 1)

10.00 21.0 10.0 66.5 4 0413760 C29110.0 1)

13/32 10.32 22.5 9.53 - 3/8 66.5 4 0413838 C29113/32 1)

10.50 19.0 10.0 66.5 4 0413777 C29110.5 1)

11.00 19.0 12.0 66.5 4 0413784 C29111.0 1)

7/16 11.11 19.0 12.7 - 1/2 66.5 4 0414316 C2917/16 1)

12.00 24.0 12.0 70.0 4 0413814 C29112.0 1)

1/2 12.70 24.0 12.7 - 1/2 70.0 4 0413807 C2911/2 1)

13.00 24.5 12.0 70.0 4 0413821 C29113.0 1)

14.00 28.5 12.0 73.0 4 0413852 C29114.0 1)

9/16 14.29 28.5 12.7 - 1/2 73.0 4 0414378 C2919/16 1)

15.00 26.5 16.0 77.0 4 0413869 C29115.0 1)

5/8 15.88 26.5 15.88 - 5/8 77.0 4 0414262 C2915/8 1)


1) diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas


C291d1ØInch

d1Ømm

l2

mm

d2Ømm

l1

mm#Flutes

StockNo.

EDP #ore-Code

16.00 26.5 16.0 77.0 4 0413876 C29116.0 1)

17.00 32.0 16.0 80.0 4 0413883 C29117.0 1)

18.00 35.0 16.0 80.0 4 0413906 C29118.0 1)

19.00 38.0 16.0 83.5 4 0413913 C29119.0 1)

3/4 19.05 38.0 15.88 - 5/8 83.5 4 0414101 C2913/4 1)

20.00 38.0 16.0 83.5 4 0413968 C29120.0 1)

21.00 38.0 25.0 95.0 6 0413975 C29121.0 1)

22.00 41.5 25.0 98.5 6 0413982 C29122.0 1)

7/8 22.23 41.5 25.4 - 1 98.5 6 0414323 C2917/8 1)

23.00 41.5 25.0 98.5 6 0413999 C29123.0 1)

24.00 41.5 25.0 98.5 6 0414002 C29124.0 1)

25.00 44.5 25.0 101.5 6 0414019 C29125.0 1)

1“ 25.40 43.0 25.4 - 1 101.5 6 0413692 C2911 1)

26.00 43.0 25.0 101.5 6 0414026 C29126.0 1)

28.00 46.0 25.0 104.5 6 0414033 C29128.0 1)

1.1/8 28.58 46.0 25.4 - 1 104.5 6 0413722 C2911.1/8 1)

30.00 46.0 25.0 104.5 6 0414064 C29130.0 1)

1.1/4 31.75 49.0 25.4 - 1 108.0 6 0413715 C2911.1/4X1 1)

32.00 49.0 25.0 108.0 6 0414088 C29132.0X25.0 1)

34.00 49.0 25.0 108.0 6 0414118 C29134.0X25.0 1)

1.3/8 34.93 52.5 25.4 - 1 111.0 6 0413746 C2911.3/8X1 1)

35.00 52.5 25.0 111.0 6 0414125 C29135.0X25.0 1)

36.00 52.5 25.0 111.0 6 0414132 C29136.0X25.0 1)

38.00 55.5 25.0 114.5 6 0414156 C29138.0X25.0 1)

1.1/2 38.10 55.5 25.4 - 1 114.5 6 0413708 C2911.1/2X1 1)

40.00 58.5 25.0 117.5 8 0414187 C29140.0X25.0 2)

1.5/8 41.28 60.5 25.4 - 1 117.5 8 0413753 C2911.5/8X1 2)

42.00 60.5 25.0 117.5 8 0414194 C29142.0X25.0 2)

1.3/4 44.45 63.5 25.4 - 1 120.5 8 0413739 C2911.3/4X1 2)

45.00 63.5 25.0 120.5 8 0414200 C29145.0X25.0 2)

50.00 65.0 32.0 127.0 8 0414231 C29150.0X32.0 2)

2“ 50.80 70.0 25.4 - 1 127.0 8 0413944 C2912X1 2)

2“ 50.80 65.0 31.75 - 1.1/4 127.0 8 0413951 C2912X1.1/4 2)

1) diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas2) diameter tolerance +0.005 inches / 0 / tolérance sur le diamètre +.0005 inches / 0 / Tolerancia diámetro + 0.0055 pulgadas/ -.0


C292

C292

■

●

d1ØInch

d1Ømm

l2

mm

d2Ømm

l1

mm#Flutes

StockNo.

EDP #ore-Code

1/16 1.59 4.5 6.35 - 1/4 51.0 2 0414446 C2921/16 1)

3.00 19.0 6.0 63.5 4 0414606 C2923.0 1)

1/8 3.18 19.0 6.35 - 1/4 63.5 4 0414538 C2921/8 1)

3.50 25.5 6.0 70.0 4 0414613 C2923.5 1)

4.00 25.5 6.0 70.0 4 0414675 C2924.0 1)

4.50 25.5 6.0 70.0 4 0414682 C2924.5 1)

3/16 4.76 25.5 6.35 - 1/4 70.0 4 0414637 C2923/16 1)

5.00 31.5 6.0 76.0 4 0414699 C2925.0 1)

6.00 31.5 6.0 76.0 4 0414729 C2926.0 1)

1/4 6.35 31.5 6.35 - 1/4 76.0 4 0414484 C2921/4 1)

7.00 34.0 10.0 79.5 4 0414736 C2927.0 1)

9/32 7.14 34.0 9.53 - 3/8 79.5 4 0414798 C2929/32 1)

5/16 7.94 34.0 9.53 - 3/8 79.5 4 0414705 C2925/16 1)

8.00 34.0 10.0 79.5 4 0414767 C2928.0 1)

9.00 37.0 10.0 82.5 4 0414774 C2929.0 1)

3/8 9.53 37.0 9.53 - 3/8 82.5 4 0414668 C2923/8 1)

10.00 37.0 10.0 82.5 4 0414422 C29210.0 1)

11.00 41.5 12.0 89.0 4 0414439 C29211.0 1)

7/16 11.11 41.5 12.7 - 1/2 89.0 4 0414743 C2927/16 1)

12.00 49.5 12.0 95.0 4 0414460 C29212.0 1)

1/2 12.70 49.5 12.7 - 1/2 95.0 4 0414453 C2921/2 1)

13.00 50.0 12.0 95.0 4 0414477 C29213.0 1)

14.00 57.0 12.0 101.5 4 0414491 C29214.0 1)

9/16 14.29 57.0 12.7 - 1/2 101.5 4 0414781 C2929/16 1)

15.00 58.5 16.0 108.5 4 0414507 C29215.0 1)

5/8 15.88 58.5 15.88 - 5/8 108.5 4 0414712 C2925/8 1)

16.00 58.5 16.0 108.5 4 0414514 C29216.0 1)

17.00 67.0 16.0 115.0 4 0414521 C29217.0 1)

18.00 70.0 16.0 115.0 4 0414545 C29218.0 1)

19.00 76.0 16.0 121.5 4 0414552 C29219.0 1)

3/4 19.05 76.0 15.88 - 5/8 121.5 4 0414651 C2923/4 1)

20.00 76.0 16.0 121.5 4 0414569 C29220.0 1)

22.00 85.5 25.0 143.0 6 0414576 C29222.0 1)

7/8 22.23 85.5 25.4 - 1 143.0 6 0414750 C2927/8 1)

24.00 92.0 25.0 149.0 6 0414583 C29224.0 1)

25.00 100.0 25.0 157.0 6 0414590 C29225.0 1)

1“ 25.40 100.0 25.4 - 1 157.0 6 0414385 C2921 1)

1.1/8 28.58 98.5 25.4 - 1 157.0 6 0414415 C2921.1/8 1)

30.00 98.5 25.0 157.0 6 0414620 C29230.0 1)

1.1/4 31.75 100.0 25.4 - 1 159.0 6 0414408 C2921.1/4X1 1)

32.00 100.0 25.0 159.0 6 0414644 C29232.0X25.0 1)

1.1/2 38.10 100.0 25.4 - 1 159.0 6 0414392 C2921.1/2X1 1)


1) diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas


C391

C391

■

●

d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flt

StockNo.

EDP #ore-Code

6.00 6 16.0 60.5 3 0414934 C3916.01/4 6.35 6.35 - 1/4 16.0 60.5 3 0414842 C3911/4 1)

8.00 10 18.0 63.5 3 0414958 C3918.03/8 9.53 9.53 - 3/8 21.0 66.5 3 0414910 C3913/8 1)

10.00 10 21.0 66.5 3 0414811 C39110.012.00 12 24.0 70.0 3 0414835 C39112.0

1/2 12.70 12.7 - 1/2 24.0 70.0 3 0414828 C3911/2 1)

14.00 12 28.5 73.0 3 0414859 C39114.0

d1ØInch

d1Ømm

d2Ømm

l2

mm

l1

mm#Flt

StockNo.

EDP #ore-Code

5/8 15.88 15.88 - 5/8

27.0 77.0 3 0414927 C3915/8 2)

16.00 16 26.5 77.0 3 0414866 C39116.018.00 16 33.0 80.0 3 0414873 C39118.0

3/4 19.05 15.88 - 5/8

38.0 83.5 3 0414903 C3913/4 2)

20.00 16 38.0 83.5 3 0414880 C39120.07/8 22.23 25.4 - 1. 35.0 98.5 3 0414941 C3917/8 2)

25.00 25 40.0 101.5 3 0414897 C39125.01“ 25.40 25.4 - 1. 40.0 101.5 3 0414804 C3911 2)

C392

C392

■

●

d1Ømm

d2Ømm

l2

mm

l1

mm#Flutes

StockNo.

EDP #ore-Code

6.00 6 31.5 76.0 3 0415023 C3926.08.00 10 34.0 79.5 3 0415030 C3928.010.00 10 37.0 82.5 3 0414965 C39210.012.00 12 49.5 95.0 3 0414972 C39212.0

d1Ømm

d2Ømm

l2

mm

l1

mm#Flutes

StockNo.

EDP #ore-Code

14.00 12 57.0 101.5 3 0414989 C39214.016.00 16 58.5 108.5 3 0414996 C39216.018.00 16 67.5 115.0 3 0415009 C39218.020.00 16 76.0 121.5 3 0415016 C39220.0

● Slot Drill ● Fraises à rainurer ● Fresas Frontales

● Slot Drill ● Fraises à rainure ● Fresas Frontales



Style Description # of Flutes Finish Page No.

4602 60° and 82° Included Angles 4 Bright 4644603 60°, 82° ,90° Included Angles Single Bright 465G135 60° Included Angle 3 Bright 465G136 90° Included Angle 3 Bright 466G137 60° Included Angle 3 Bright 466 G138 90° Included Angle 3 Bright 467G154 82° Included Angle 3 Bright 467G155 82° Included Angle 3 Bright 467

4702 Short, Straight Shank N//A Bright 4594703 Short, Taper Shank N//A Bright 460 4706 Aircraft Short, Reduced Shank N//A Bright 4614700 Long, Straight Shank N//A Bright 4614705 Aircraft Long, Straight Shank N//A Bright 4624704 Counterbore Pilots N//A Bright 463

411 Drift Keys N//A Surface Treated 468430 Drill Sleeves N//A Surface Treated 468 707, 727, 757 Tool Bit Blanks N//A N//A 468 1800, 1815, 1816 Screw Extractor Sets N//A Bright 4681900 Cutting Oil N//A N//A 468

4533 Chucking, Straight Flute 4 Bright 4434533S Chucking Set, Straight Flute N//A Bright 4464535 Chucking, Right-Hand Spiral 4 Bright 4474543 Chucking, Left-Hand Spiral 4 Bright 4484500 Hand Reamer, Straight Flute Multi Bright 4494531 Chucking, Expansion Multi Bright 4504587 Taper Pin, Straight Flute Multi Bright 4514591 Taper Pin, Left-Hand Spiral Multi Bright 4514588 Taper Pin, Left-Hand, High Spiral Multi Bright 4524600 Taper Pipe, Left-Hand Spiral Multi Bright 4524537 Chucking, R.H. Spiral, R.H. Cut Multi Bright 4534536 Chucking, Straight Flute, R.H. Cut Multi Bright 4544532 Chucking, Expansion Multi Bright 4554579 Bridge, Spiral Flute, R.H. Cut N//A Bright 4564608 Center, Straight Shank N/A Bright 456SS300 Core Drill 3 Bright 457SS400 Core Drill 4 Bright 457T400 Core Drill 4 Surface Treated 458

Reamers

Counterbores

Countersinks

Miscellaneous

Table of ContentsReamers, Counterbores, Countersinks, Miscellaneous

437

How To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 82 C : C is the Alpha Code) .2. Find the closest diameter for your cutting application on the chart to find your IPR.

Reamers - Feed in MM per Revolution Ø Diameter 1.5 2 3 5 8 10 12 16 20 25 30 40 50

A 0.045 0.055 0.078 0.100 0.150 0.170 0.185 0.220 0.250 0.280 0.320 0.390 0.440

B 0.055 0.072 0.110 0.150 0.180 0.210 0.240 0.280 0.310 0.360 0.400 0.500 0.550

C 0.065 0.085 0.135 0.185 0.220 0.260 0.285 0.335 0.390 0.440 0.480 0.600 0.680

D 0.080 0.110 0.160 0.200 0.270 0.320 0.360 0.410 0.470 0.540 0.600 0.730 0.850

E 0.100 0.140 0.180 0.250 0.350 0.390 0.430 0.500 0.530 0.640 0.750 0.910 1.100

F 0.140 0.180 0.260 0.350 0.440 0.500 0.550 0.630 0.700 0.800 0.930 1.200 1.500

mm/REV ± 15%

Alpha Code

Reamers - Feed in Inches per Revolution Ø Diameter 1/16 5/64 1/8 3/16 5/16 25/64 1/2 5/8 25/32 1” 1-13/16 1-1/2 2”

A 0.002 0.002 0.003 0.004 0.006 0.007 0.007 0.009 0.010 0.011 0.013 0.015 0.017

B 0.002 0.003 0.004 0.006 0.007 0.008 0.009 0.011 0.012 0.014 0.016 0.020 0.022

C 0.003 0.003 0.005 0.007 0.009 0.010 0.011 0.013 0.015 0.017 0.019 0.024 0.027

D 0.031 0.004 0.006 0.008 0.011 0.013 0.014 0.016 0.019 0.021 0.024 0.029 0.033

E 0.004 0.006 0.007 0.010 0.014 0.015 0.017 0.020 0.021 0.025 0.030 0.036 1.043

F 0.006 0.007 0.010 0.014 0.017 0.020 0.022 0.025 0.028 0.031 0.037 1.047 1.059

Alpha Code

Reamers


Feed Rate Chart

438

6 8 10 16 20 25 32 40 60 80A 0.03 0.04 0.05 0.06 0.08 0.09 0.10 0.12 0.14 0.16B 0.04 0.05 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20C 0.05 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22D 0.06 0.08 0.10 0.12 0.15 0.18 0.20 0.22 0.25 0.28E 0.08 0.10 0.12 0.15 0.18 0.20 0.25 0.27 0.30 0.32F 0.09 0.11 0.13 0.16 0.19 0.21 0.26 0.29 0.33 0.36G 0.10 0.12 0.15 0.18 0.20 0.22 0.28 0.32 0.36 0.40H 0.12 0.15 0.18 0.20 0.22 0.25 0.30 0.35 0.40 0.45

Alpha Code

Countersinks, Counterbores - Feed in MM per Revolution Ø Diameter

1/4 5/16 5/64 5/8 25/32 1” 1-1/4 1-1/2 2-3/8 3”

A 0.001 0.002 0.002 0.002 0.003 0.004 0.004 0.005 0.006 0.006B 0.002 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008C 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008 0.009D 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010 0.011E 0.003 0.004 0.005 0.006 0.007 0.008 0.010 0.011 0.012 0.013F 0.004 0.004 0.005 0.006 0.007 0.008 0.010 0.011 0.013 0.014G 0.004 0.005 0.006 0.007 0.008 0.009 0.011 0.013 0.014 0.016H 0.005 0.006 0.007 0.008 0.009 0.010 0.012 0.014 0.016 0.018

Alpha Code

Countersinks, Counterbores - Feed in Inches per Revolution Ø Diameter

Countersinks, Counterbores

Feed Rate ChartsHow To Use This Chart to Find Cutting Feed Rate (IPR):1. Find your Alpha Code on the AMG Chart (example: 82 C : C is the Alpha Code) .2. Find the closest diameter for your cutting application on the chart to find your IPR.


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Reamers



Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find other Product Features.Find the Surface Feet Per Minute (SFM) and Alpha Code.To calculate IPR, refer to chart on page 438-439. example: 82 C 82 = SFM C = Alpha Code to find your Feed Rate


Taper Shank

Straight Shank

Shank with Square End

Shank with Tang

Square Shank

Countersink Application

Counterbore Application

Icon Guide for Reamers, Counterbores and Countersinks

1

23

2

13



Reamers, Counterbores

440

4

4533 4535 4543 4500

443 447 448 449■82C ■82C ■82C ■82C■66C ■66C ■66C ■66C■52C ■52C ■52C ■52C■49B ■49B ■49B ■49B●30B ●30B ●30B ●30B●16A ●16A ●16A ●16A

■36C ■36C ■36C ■36C●20B ●20B ●20B ●20B●26B ●26B ●26B ●26B●20B ●20B ●20B ●20B●52E ●52E ●52E ●52E●49D ●49D ●49D ●49D●43C ●43C ●43C ●43C●36C ●36C ●36C ●36C●49C ●49C ●49C ●49C■30B ■30B ■30B ■30B●16B ●16B ●16B ●16B■26D ■26D ■26D ■26D●16C ●16C ●16C ●16C●10C ●10C ●10C ●10C●82D ●82D ●82D ●82D●92E ●92E ●92E ●92E●82D ●82D ●82D ●82D●46D ●46D ●46D ●46D

Material:Style:

Coating:Standard:

Direction of Cut:Shank:

Rea

mer

s


1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Reamers and Counterbores


T400

xx■75F■46F■49F■49D●36D

■66F●39D●39D

■108E■59H■59F

■69F●36D

●49D

4587 4591 4588 4600 4537 4536 4532

451 451 452 452 453 454 455■59C ■59C ■59C ■59C ■82C ■82C ■82C■46C ■46C ■46C ■46C ■66C ■66C ■66C■36C ■36C ■36C ■36C ■52C ■52C ■52C■33B ■33B ■33B ■33B ■49B ■49B ■49B●16B ●16B ●16B ●16B ●30B ●30B ●30B●13A ●13A ●13A ●13A ●16A ●16A ●16A

■26C ■26C ■26C ■26C ■36C ■36C ■36C●16B ●16B ●20B ●20B ●20B●20B ●20B ●26B ●26B ●26B

●20B ●20B ●20B■46E ■46E ■46E ■46E ●52E ●52E ●52E●36D ●36D ●36D ●36D ●49D ●49D ●49D●33C ●33C ●33C ●33C ●43C ●43C ●43C●30C ●30C ●30C ●30C ●36C ●36C ●36C■36C ■36C ■36C ■36C ■49C ●49C ●49C●16B ●16B ●16B ●16B ●30B ■30B ■30B●13B ●13B ●13B ●13B ●16B ●16B ●16B●16D ●16D ●16D ●16D ■26D ■26D ■26D● ● ● ● ●16C ●16C ●16C● ● ● ● ●10C ●10C ●10C●59D ●59D ●59D ●59D ●82D ●82D ●82D■66E ■66E ■66E ■66E ●92E ●92E ●92E●59D ●59D ●59D ●59D ●82D ●82D ●82D●36D ●36D ●36D ●36D ●46D ●46D ●46D●75F ●75F ●75F ●75F●59F ●59F ●59F ●59F●49E ●49E●46D ●46D

●69B ●69B ●69B ●69B

4579 4608 SS300SS400

456 456 457■59C ■98F ■75C■46C ■82E ■46C■36C ■66D ■49C■33B ■49D ■49B●16B ■33B ●36B●13A ●20A

■26C ●26C ■66C●16B ●20B ●39B●20B ●13A ●39B

●13A■46E ●82F ■108E●36D ●49D ■59D●33C ●39C ■59C●30C ●26C■36C ■39C ■69C●16B ■33A ●36B●13B ■26A●16D ■39C ●49D● ■20B● ■13A●59D ■82D■66E ■66F●59D ■82F●36D ●33D●75F ●98G●59F ●82F●49E ●66F●46D ●33F

●98G●69B ●66G

4531

450■82C■66C■52C■49B●30B●16A

■36C●20B●26B●20B●52E●49D●43C●36C●49C■30B●16B■26D●16C●10C●82D●92E●82D●46D

T400

xx■75F■46F■49F■49D●36D

■66F●39D●39D

■108E■59H■59F

■69F●36D

●49D

T400

xx■75F■46F■49F■49D●36D

■66F●39D●39D

■108E■59H■59F

■69F●36D

●49D

T400

xx■75F■46F■49F■49D●36D

■66F●39D●39D

■108E■59H■59F

■69F●36D

●49D

T400

458■75F■46F■49F■49D●36D

■66F●39D●39D

■108E■59H■59F

■69F●36D

●49D

441

4702 Short

4703 Short

4706 Short

459 460 461■82C ■82C ■82C■66C ■66C ■66C■52C ■52C ■52C■49B ■49B ■49B●30B ●30B ●30B●16A ●16A ●16A

■36C ■36C ■36C●20B ●20B ●20B●26B ●26B ●26B

●52E ●52E ●52E●49D ●49D ●49D●43C ●43C ●43C●36C ●36C ●36C●49C ●49C ●49C■30B ■30B ■30B●16B ●16B ●16B■26D ■26D ■26D●16C ●16C ●16C●10C ●10C ●10C●82D ●82D ●82D●92E ●92E ●92E●82D ●82D ●82D●46D ●46D ●46D

4700, 4705 Long

461■82C■66C■52C■49B●30B●16A

■36C●20B●26B

●52E●49D●43C●36C●49C■30B●16B■26D●16C●10C●82D●92E●82D●46D

Rea

mer

s/C

ount

erbo

res

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1


Counterbore Pilot, 4704, Page 463

1.11.21.31.41.51.61.71.82.12.22.32.43.13.23.33.44.14.24.35.15.25.36.16.26.36.47.17.27.37.48.18.28.39.110.1

Hardness HB

<120<200<250<250>250<350>35049-55HRC55-63HRC<250<250<300<300<150>150<300<200>200<300<200<270>270<350<150<270>270<350<100<200<200<470<100<150<120<120---------<550---


1. Steel


2.Stainless Steel


3.Cast Iron




6.Copper







Reamers



Determine your Workpiece Material. Select Material from the AMG Chart below.Use the icons to find other Product Features.Find the Surface Feet Per Minute (SFM) and Alpha Code.To calculate IPR, refer to chart on page 438-439. example: 82 C 82 = SFM C = Alpha Code to find your Feed Rate


Taper Shank

Straight Shank

Shank with Square End

Shank with Tang

Square Shank

Countersink Application

Counterbore Application

Icon Guide for Reamers, Counterbores and Countersinks

1

23

2

13



Countersinks

442

4

4602 4-Flute

4603 1-Flute

G135-G138 3-Flute

G154-G155 3-Flute

464 465 465 467■98F ■98F ■98F ■98F■82E ■82E ■82E ■82E■66D ■66D ■66D ■66D■49D ■49D ■49D ■49D■33B ■33B ■33B ■33B●20A ●20A ●20A ●20A

●26C ●26C ●26C ●26C●20B ●20B ●20B ●20B●13A ●13A ●13A ●13A

●82F ●82F ●82F ●82F●49D ●49D ●49D ●49D●39C ●39C ●39C ●39C●26C ●26C ●26C ●26C■39C ■39C ■39C ■39C■33A ■33A ■33A ■33A■26A ■26A ■26A ■26A■39C ■39C ■39C ■39C■20B ■20B ■20B ■20B■13A ■13A ■13A ■13A■82D ■82D ■82D ■82D■66F ■66F ■66F ■66F■82F ■82F ■82F ■82F●33D ●33D ●33D ●33D●98G ●98G ●98G ●98G●82F ●82F ●82F ●82F●66F ●66F ●66F ●66F●33F ●33F ●33F ●33F●98G ●98G ●98G ●98G●66G ●66G ●66G ●66G

Material:Style:

Coating:Standard:

Direction of Cut:Application:

Shank:

Cou

nter

sink

s



4533

4533

■●

d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

60 0.0400 0.0390 1/2 2.1/2 4 501017359 0.0410 0.0390 1/2 2.1/2 4 501017558 0.0420 0.0390 1/2 2.1/2 4 501017757 0.0430 0.0390 1/2 2.1/2 4 501017956 0.0465 0.0455 1/2 2.1/2 4 50101863/64 0.0469 0.0455 1/2 2.1/2 4 501018755 0.0520 0.0510 1/2 2.1/2 4 501019854 0.0550 0.0510 1/2 2.1/2 4 501020453 0.0595 0.0585 1/2 2.1/2 4 50102131/16 0.0625 0.0585 1/2 2.1/2 4 501021952 0.0635 0.0585 1/2 2.1/2 4 501022151 0.0670 0.0660 3/4 3“ 4 501022850 0.0700 0.0660 3/4 3“ 4 501023449 0.0730 0.0660 3/4 3“ 4 501024048 0.0760 0.0720 3/4 3“ 4 50102465/64 0.0781 0.0720 3/4 3“ 4 501025147 0.0785 0.0720 3/4 3“ 4 501025246 0.0810 0.0771 3/4 3“ 4 501025745 0.0820 0.0771 3/4 3“ 4 501025944 0.0860 0.0810 3/4 3“ 4 501026743 0.0890 0.0810 3/4 3“ 4 501027342 0.0935 0.0880 3/4 3“ 4 50102823/32 0.0938 0.0880 3/4 3“ 4 501028341 0.0960 0.0928 7/8 3.1/2 4 501028840 0.0980 0.0928 7/8 3.1/2 4 501029239 0.0995 0.0928 7/8 3.1/2 4 501029538 0.1015 0.0950 7/8 3.1/2 4 501029937 0.1040 0.0950 7/8 3.1/2 4 501030436 0.1065 0.1030 7/8 3.1/2 4 50103097/64 0.1094 0.1030 7/8 3.1/2 4 501031635 0.1100 0.1030 7/8 3.1/2 4 501031834 0.1110 0.1055 7/8 3.1/2 4 501032033 0.1130 0.1055 7/8 3.1/2 4 501032432 0.1160 0.1120 7/8 3.1/2 4 501033031 0.1200 0.1120 7/8 3.1/2 4 50103380.1230 0.1230 0.1120 7/8 3.1/2 4 5010344

● Chucking Reamer● Right Hand Spiral Flute, Straight Flute

● Alésoirs machine ● Escariadores de máquina


4533d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

0.1240 0.1240 0.1190 7/8 3.1/2 4 50103460.1247 0.1247 0.1190 7/8 3.1/2 4 50103491/8 0.1250 0.1190 7/8 3.1/2 4 50103500.1260 0.1260 0.1190 7/8 3.1/2 4 501035430 0.1285 0.1190 7/8 3.1/2 4 501035929 0.1360 0.1275 1“ 4“ 4 501037428 0.1400 0.1350 1“ 4“ 4 50103839/64 0.1410 0.1350 1“ 4“ 4 501038427 0.1440 0.1350 1“ 4“ 4 501039126 0.1470 0.1430 1“ 4“ 4 501039725 0.1495 0.1430 1“ 4“ 4 501040224 0.1520 0.1460 1“ 4“ 4 501040723 0.1540 0.1460 1“ 4“ 4 50104115/32 0.1562 0.1510 1“ 4“ 6 501041622 0.1570 0.1510 1“ 4“ 6 501041821 0.1590 0.1530 1.1/8 4.1/2 6 501042220 0.1610 0.1530 1.1/8 4.1/2 6 501042619 0.1660 0.1595 1.1/8 4.1/2 6 501043618 0.1695 0.1595 1.1/8 4.1/2 6 501044311/64 0.1719 0.1645 1.1/8 4.1/2 6 501044817 0.1730 0.1645 1.1/8 4.1/2 6 501045116 0.1770 0.1700 1.1/8 4.1/2 6 501045915 0.1800 0.1755 1.1/8 4.1/2 6 501046514 0.1820 0.1755 1.1/8 4.1/2 6 501046913 0.1850 0.1800 1.1/8 4.1/2 6 50104750.1855 0.1855 0.1800 1.1/8 4.1/2 6 50104760.1865 0.1865 0.1800 1.1/8 4.1/2 6 50104780.1870 0.1870 0.1800 1.1/8 4.1/2 6 50104793/16 0.1875 0.1800 1.1/8 4.1/2 6 50104800.1885 0.1885 0.1800 1.1/8 4.1/2 6 501048212 0.1890 0.1800 1.1/8 4.1/2 6 501048311 0.1910 0.1860 1.1/4 5“ 6 501048710 0.1935 0.1860 1.1/4 5“ 6 50104929 0.1960 0.1895 1.1/4 5“ 6 50104988 0.1990 0.1895 1.1/4 5“ 6 50105047 0.2010 0.1945 1.1/4 5“ 6 501050813/64 0.2031 0.1945 1.1/4 5“ 6 50105136 0.2040 0.1945 1.1/4 5“ 6 50105155 0.2055 0.2016 1.1/4 5“ 6 50105184 0.2090 0.2016 1.1/4 5“ 6 50105253 0.2130 0.2075 1.1/4 5“ 6 50105337/32 0.2188 0.2075 1.1/4 5“ 6 50105452 0.2210 0.2173 1.1/2 6“ 6 50105501 0.2280 0.2173 1.1/2 6“ 6 5010564A 0.2340 0.2265 1.1/2 6“ 6 501057615/64 0.2344 0.2265 1.1/2 6“ 6 5010577B 0.2380 0.2329 1.1/2 6“ 6 5010585C 0.2420 0.2329 1.1/2 6“ 6 5010593D 0.2460 0.2329 1.1/2 6“ 6 50106020.2480 0.2480 0.2329 1.1/2 6“ 6 50106060.2490 0.2490 0.2400 1.1/2 6“ 6 50106080.2495 0.2495 0.2400 1.1/2 6“ 6 50106091/4 0.2500 0.2400 1.1/2 6“ 6 5010610E 0.2500 0.2400 1.1/2 6“ 6 50112020.2510 0.2510 0.2400 1.1/2 6“ 6 5010612F 0.2570 0.2485 1.1/2 6“ 6 5010619G 0.2610 0.2485 1.1/2 6“ 6 501062217/64 0.2656 0.2485 1.1/2 6“ 6 5010623


4533d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

H 0.2660 0.2485 1.1/2 6“ 6 5010624I 0.2720 0.2485 1.1/2 6“ 6 5010626J 0.2770 0.2485 1.1/2 6“ 6 5010627K 0.2810 0.2485 1.1/2 6“ 6 50106289/32 0.2812 0.2485 1.1/2 6“ 6 5010629L 0.2900 0.2792 1.1/2 6“ 6 5010630M 0.2950 0.2792 1.1/2 6“ 6 501063119/64 0.2969 0.2792 1.1/2 6“ 6 5010632N 0.3020 0.2792 1.1/2 6“ 6 50106330.3100 0.3100 0.2792 1.1/2 6“ 6 50106360.3115 0.3115 0.2792 1.1/2 6“ 6 50106380.3120 0.3120 0.2792 1.1/2 6“ 6 50106395/16 0.3125 0.2792 1.1/2 6“ 6 50106400.3135 0.3135 0.2792 1.1/2 6“ 6 5010642O 0.3160 0.2792 1.1/2 6“ 6 5010645P 0.3230 0.2792 1.1/2 6“ 6 501064721/64 0.3281 0.2792 1.1/2 6“ 6 5010648Q 0.3320 0.2792 1.1/2 6“ 6 5010649R 0.3390 0.2792 1.1/2 6“ 6 501065011/32 0.3438 0.2792 1.1/2 6“ 6 5010651S 0.3480 0.3105 1.3/4 7“ 6 5010652T 0.3580 0.3105 1.3/4 7“ 6 501065323/64 0.3594 0.3105 1.3/4 7“ 6 5010654U 0.3680 0.3105 1.3/4 7“ 6 50106550.3730 0.3730 0.3105 1.3/4 7“ 6 50106580.3740 0.3740 0.3105 1.3/4 7“ 6 50106590.3745 0.3745 0.3105 1.3/4 7“ 6 50106603/8 0.3750 0.3105 1.3/4 7“ 6 50106610.3760 0.3760 0.3105 1.3/4 7“ 6 5010662V 0.3770 0.3105 1.3/4 7“ 6 5010663W 0.3860 0.3105 1.3/4 7“ 6 501066525/64 0.3910 0.3105 1.3/4 7“ 6 5010666X 0.3970 0.3105 1.3/4 7“ 6 5010667Y 0.4040 0.3105 1.3/4 7“ 6 501066813/32 0.4062 0.3105 1.3/4 7“ 6 5010670Z 0.4130 0.3730 1.3/4 7“ 6 501067127/64 0.4219 0.3730 1.3/4 7“ 6 50106720.4355 0.4355 0.3730 1.3/4 7“ 6 50106730.4365 0.4365 0.3730 1.3/4 7“ 6 50106740.4370 0.4370 0.3730 1.3/4 7“ 6 50106757/16 0.4375 0.3730 1.3/4 7“ 6 50106760.4385 0.4385 0.3730 1.3/4 7“ 6 501067729/64 0.4531 0.3730 1.3/4 7“ 6 501067815/32 0.4688 0.3730 1.3/4 7“ 6 501067931/64 0.4844 0.4355 2“ 8“ 6 50106800.4980 0.4980 0.4355 2“ 8“ 6 50106810.4990 0.4990 0.4355 2“ 8“ 6 50106820.4995 0.4995 0.4355 2“ 8“ 6 50106831/2 0.5000 0.4355 2“ 8“ 6 50106840.5010 0.5010 0.4355 2“ 8“ 6 501068533/64 0.5156 0.4355 2“ 8“ 6 501069017/32 0.5312 0.4355 2“ 8“ 6 501069135/64 0.5469 0.4355 2“ 8“ 8 50106929/16 0.5625 0.4355 2“ 8“ 8 501069337/64 0.5781 0.4355 2“ 8“ 8 501069419/32 0.5938 0.4355 2“ 8“ 8 501069539/64 0.6094 0.5620 2.1/4 9“ 8 50106965/8 0.6250 0.5620 2.1/4 9“ 8 5010698


4533d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

41/64 0.6410 0.5620 2.1/4 9“ 8 501070021/32 0.6562 0.5620 2.1/4 9“ 8 501070143/64 0.6719 0.5620 2.1/4 9“ 8 501070211/16 0.6875 0.5620 2.1/4 9“ 8 501070345/64 0.7031 0.5620 2.1/4 9“ 8 501070423/32 0.7188 0.5620 2.1/4 9“ 8 501070547/64 0.7344 0.6245 2.1/2 9.1/2 8 50107063/4 0.7500 0.6245 2.1/2 9.1/2 8 501070849/64 0.7656 0.6245 2.1/2 9.1/2 8 501071025/32 0.7812 0.6245 2.1/2 9.1/2 8 501071151/64 0.7969 0.6245 2.1/2 9.1/2 8 501071213/16 0.8125 0.6245 2.1/2 9.1/2 8 501071353/64 0.8281 0.6245 2.1/2 9.1/2 8 501071427/32 0.8438 0.6245 2.1/2 9.1/2 8 501071555/64 0.8594 0.7495 2.5/8 10“ 8 50107167/8 0.8750 0.7495 2.5/8 10“ 8 501071757/64 0.8910 0.7495 2.5/8 10“ 8 501071829/32 0.9062 0.7495 2.5/8 10“ 8 501071959/64 0.9219 0.7495 2.5/8 10“ 8 501072015/16 0.9375 0.7495 2.5/8 10“ 8 501072161/64 0.9531 0.7495 2.5/8 10“ 8 501072231/32 0.9688 0.7495 2.5/8 10“ 8 501072363/64 0.9844 0.8745 2.3/4 10.1/2 8 50107241“ 1.0000 0.8745 2.3/4 10.1/2 8 50107251.1/16 1.0625 0.8745 2.3/4 10.1/2 8 50107261.1/8 1.1250 0.8745 2.7/8 11“ 10 50107271.3/16 1.1875 0.9995 2.7/8 11“ 10 50107281.1/4 1.2500 0.9995 3“ 11.1/2 10 50107291.5/16 1.3125 0.9995 3“ 11.1/2 10 50101031.3/8 1.3750 0.9995 3.1/4 12“ 10 50107311.7/16 1.4375 1.2495 3.1/4 12“ 10 50101051.1/2 1.5000 1.2495 3.1/2 12.1/2 10 5010733

4533S

4533S

Type

Style

# in Set

Sizes

EDP #

50 4533 29 1/16-1/2 x 64ths 501108951 4533 14 1/8-1/2 x 16ths, decimal 0.001“ over and 0.001“ under 501109052 4533 60 N1 - N60 501109153 4533 26 A - Z 5011092

● Chucking Reamer Sets In Steel Cases ● Coffret d’alésoirs machine ● Juego de escariador de máquina en acero cementado


4535

4535

■●

d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

1/16 0.0625 0.0585 1/2 2.1/2 4 50100545/64 0.0781 0.0720 3/4 3“ 4 50100553/32 0.0938 0.0880 3/4 3“ 4 50100567/64 0.1094 0.1030 7/8 3.1/2 4 50100571/8 0.1250 0.1190 7/8 3.1/2 4 50100589/64 0.1410 0.1350 1“ 4“ 4 50100595/32 0.1562 0.1510 1“ 4“ 6 501006011/64 0.1719 0.1645 1.1/8 4.1/2 6 50100613/16 0.1875 0.1800 1.1/8 4.1/2 6 501006213/64 0.2031 0.1945 1.1/4 5“ 6 50100637/32 0.2188 0.2075 1.1/4 5“ 6 501006415/64 0.2344 0.2265 1.1/2 6“ 6 50100651/4 0.2500 0.2400 1.1/2 6“ 6 501006617/64 0.2656 0.2485 1.1/2 6“ 6 50100679/32 0.2812 0.2485 1.1/2 6“ 6 501006819/64 0.2969 0.2792 1.1/2 6“ 6 50100695/16 0.3125 0.2792 1.1/2 6“ 6 501007021/64 0.3281 0.2792 1.1/2 6“ 6 501007111/32 0.3438 0.2792 1.1/2 6“ 6 501007223/64 0.3594 0.3105 1.3/4 7“ 6 50100733/8 0.3750 0.3105 1.3/4 7“ 6 501007425/64 0.3910 0.3105 1.3/4 7“ 6 501007513/32 0.4062 0.3105 1.3/4 7“ 6 501007627/64 0.4219 0.3730 1.3/4 7“ 6 50100777/16 0.4375 0.3730 1.3/4 7“ 6 501007829/64 0.4531 0.3730 1.3/4 7“ 6 501007915/32 0.4688 0.3730 1.3/4 7“ 6 501008031/64 0.4844 0.4355 2“ 8“ 6 50100811/2 0.5000 0.4355 2“ 8“ 6 501008217/32 0.5312 0.4355 2“ 8“ 6 50100839/16 0.5625 0.4355 2“ 8“ 8 501008419/32 0.5938 0.4355 2“ 8“ 8 50100855/8 0.6250 0.5620 2.1/4 9“ 8 501008621/32 0.6562 0.5620 2.1/4 9“ 8 501008711/16 0.6875 0.5620 2.1/4 9“ 8 501008823/32 0.7188 0.5620 2.1/4 9“ 8 5010089

● Chucking Reamer● Right Hand Spiral Flute



4535d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

3/4 0.7500 0.6245 2.1/2 9.1/2 8 501009025/32 0.7812 0.6245 2.1/2 9.1/2 8 501009113/16 0.8125 0.6245 2.1/2 9.1/2 8 501009227/32 0.8438 0.6245 2.1/2 9.1/2 8 50100937/8 0.8750 0.7495 2.5/8 10“ 8 501009429/32 0.9062 0.7495 2.5/8 10“ 8 501009515/16 0.9375 0.7495 2.5/8 10“ 8 501009631/32 0.9688 0.7495 2.5/8 10“ 8 50100971“ 1.0000 0.8745 2.3/4 10.1/2 8 50100981.1/16 1.0625 0.8745 2.3/4 10.1/2 8 50100991.1/8 1.1250 0.8745 2.7/8 11“ 10 50101001.3/16 1.1875 0.9995 2.7/8 11“ 10 50101011.1/4 1.2500 0.9995 3“ 11.1/2 10 50101021.3/8 1.3750 0.9995 3.1/4 12“ 10 50101041.1/2 1.5000 1.2495 3.1/2 12.1/2 10 5010106

4543

4543

■

●

d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

1/16 0.0625 0.0585 1/2 2.1/2 4 50100013/32 0.0938 0.0880 3/4 3“ 4 50100031/8 0.1250 0.1190 7/8 3.1/2 4 50100055/32 0.1562 0.1510 1“ 4“ 6 50100073/16 0.1875 0.1800 1.1/8 4.1/2 6 50100097/32 0.2188 0.2075 1.1/4 5“ 6 50100111/4 0.2500 0.2400 1.1/2 6“ 6 50100139/32 0.2812 0.2485 1.1/2 6“ 6 50100155/16 0.3125 0.2792 1.1/2 6“ 6 501001711/32 0.3438 0.2792 1.1/2 6“ 6 50100193/8 0.3750 0.3100 1.3/4 7“ 6 501002113/32 0.4062 0.3100 1.3/4 7“ 6 50100237/16 0.4375 0.3730 1.3/4 7“ 6 501002515/32 0.4688 0.3730 1.3/4 7“ 6 50100271/2 0.5000 0.4355 2“ 8“ 6 5010029

● Chucking Reamer ● Left Hand Spiral Flute

● Alésoirs machine LH hélicoidaux ● Escariadores de máquina estrias en espiral LH


4500

■

●

d1ØInch

d1decimalInch

l2Inch

l1Inch

# Flutes

EDP #

1/8 0.1250 1.1/2 3“ 6 50109285/32 0.1562 1.5/8 3.1/4 6 50109293/16 0.1875 1.3/4 3.1/2 6 50109307/32 0.2187 1.7/8 3.3/4 6 50109311/4 0.2500 2“ 4“ 6 50109329/32 0.2813 2.1/8 4.1/4 6 50109335/16 0.3125 2.1/4 4.1/2 6 501093411/32 0.3437 2.3/8 4.3/4 6 50109353/8 0.3750 2.1/2 5“ 6 501093613/32 0.4062 2.5/8 5.1/4 6 50109377/16 0.4375 2.3/4 5.1/2 6 501093815/32 0.4688 2.7/8 5.3/4 6 50109391/2 0.5000 3“ 6“ 6 501094017/32 0.5312 3.1/8 6.1/4 6 50109419/16 0.5625 3.1/4 6.1/2 8 501094219/32 0.5938 3.3/8 6.3/4 8 50109435/8 0.6250 3.1/2 7“ 8 501094421/32 0.6562 3.11/16 7.3/8 8 501094511/16 0.6875 3.7/8 7.3/4 8 501094623/32 0.7188 4.1/16 8.1/8 8 50109473/4 0.7500 4.3/16 8.3/8 8 50109487/8 0.8750 4.7/8 9.3/4 8 50109501“ 1.0000 5.7/16 10.7/8 8 50109521.1/8 1.1250 5.13/16 11.5/8 10 50109531.1/4 1.2500 6.1/8 12.1/4 10 50109541.3/8 1.3750 6.5/16 12.5/8 10 50109551.1/2 1.5000 6.1/2 13 10 5010956

4500● Hand Reamer ● Alésoir à main ● Escariador de mano


d1ØInch

d1decimalInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

1.3/4 1.7500 1.1/4 2.3/8 13.1/2 10 50108121.13/16 1.8125 1.1/2 2.3/8 13.1/2 10 50108131.7/8 1.8750 1.1/2 2.1/2 14“ 12 50108141.15/16 1.9375 1.1/2 2.1/2 14“ 12 50108152“ 2.0000 1.1/2 2.1/2 14“ 12 5010816

4531

4531

■

●

d1ØInch

d1decimalInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

3/8 0.3750 5/16 3/4 7“ 6 501120413/32 0.4062 5/16 3/4 7“ 6 50112057/16 0.4375 3/8 7/8 7“ 6 501077815/32 0.4687 3/8 7/8 7“ 6 50107791/2 0.5000 7/16 1“ 8“ 6 501078017/32 0.5312 7/16 1“ 8“ 6 50107819/16 0.5625 7/16 1.1/8 8“ 6 501078219/32 0.5938 7/16 1.1/8 8“ 6 50107835/8 0.6250 9/16 1.1/4 9“ 6 501078421/32 0.6562 9/16 1.1/4 9“ 6 501078511/16 0.6875 9/16 1.1/4 9“ 6 501078623/32 0.7188 9/16 1.1/4 9“ 6 50107873/4 0.7500 5/8 1.3/8 9.1/2 6 501078825/32 0.7812 5/8 1.3/8 9.1/2 6 501078913/16 0.8125 5/8 1.3/8 9.1/2 6 501079027/32 0.8438 5/8 1.3/8 9.1/2 6 50107917/8 0.8750 3/4 1.1/2 10“ 6 501079229/32 0.9062 3/4 1.1/2 10“ 6 501079315/16 0.9375 3/4 1.1/2 10“ 6 501079431/32 0.9688 3/4 1.1/2 10“ 6 50107951“ 1.0000 7/8 1.1/8 10.1/2 8 50107961.1/32 1.0312 7/8 1.5/8 10.1/2 8 50107971.1/16 1.0625 7/8 1.5/8 10.1/2 8 50107981.3/32 1.0937 7/8 1.5/8 10.1/2 8 50107991.1/8 1.1250 7/8 1.3/4 11“ 8 50108001.5/32 1.1562 7/8 1.3/4 11“ 8 50108011.3/16 1.1875 1“ 1.3/4 11“ 8 50108021.7/32 1.2187 1“ 1.3/4 11“ 8 50108031.1/4 1.2500 1“ 1.7/8 11.1/2 8 50108041.5/16 1.3125 1“ 1.7/8 11.1/2 8 50108051.3/8 1.3750 1“ 2“ 12“ 8 50108061.7/16 1.4375 1.1/4 2“ 12“ 10 50108071.1/2 1.5000 1.1/4 2.1/8 12.1/2 10 50108081.9/16 1.5625 1.1/4 2.1/8 12.1/2 10 50108091.5/8 1.6250 1.1/4 2.1/4 13“ 10 50108101.11/16 1.6875 1.1/4 2.1/4 13“ 10 5010811

● Chucking Reamer, Expansion ● Alésoirs machine ● Escariadores de máquina


4587

4587

■●

nomØ

dsmallØInch

dlargeØInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

0 0.1287 0.1638 11/64 1.11/16 2.15/16 6 50111291 0.1447 0.1798 3/16 1.11/16 2.15/16 6 50111302 0.1600 0.201 13/64 1.15/16 3.3/16 6 50111313 0.1813 0.2294 15/64 2.5/16 3.11/16 6 50111324 0.2071 0.2600 17/64 2.9/16 4.1/16 6 50111335 0.2410 0.2994 5/16 2.13/16 4.5/16 6 50111346 0.2773 0.354 23/64 3.11/16 5.7/16 6 50111357 0.3297 0.422 13/32 4.7/16 6.5/16 6 50111368 0.3971 0.505 7/16 5.3/16 7.3/16 6 50111379 0.4800 0.6066 9/16 6.1/16 8.5/16 8 501113810 0.5799 0.7216 5/8 6.13/16 9.5/16 8 5011139

● Taper Pin Reamer (Taper: 1/4” per foot) ● Alésoir machine cône morse conique ● Escariadores para pasadores cónicos

4591

4591

■

●

nomØ

dsmallØInch

dlargeØInch

d2ØInch

l2

Inch

l1

Inch # Flutes

EDP #

0 0.1287 0.1638 11/64 1.11/16 2.15/16 6 50111461 0.1447 0.1798 3/16 1.11/16 2.15/16 6 50111472 0.1600 0.201 13/64 1.15/16 3.3/16 6 50111483 0.1813 0.2294 15/64 2.5/16 3.11/16 6 50111494 0.2071 0.2600 17/64 2.9/16 4.1/16 6 50111505 0.2410 0.2994 5/16 2.13/16 4.5/16 6 50111516 0.2773 0.354 23/64 3.11/16 5.7/16 6 50111527 0.3297 0.422 13/32 4.7/16 6.5/16 6 50111538 0.3971 0.505 7/16 5.3/16 7.3/16 6 50111549 0.4800 0.6066 9/16 6.1/16 8.5/16 8 501115510 0.5799 0.7216 5/8 6.13/16 9.5/16 8 5011156

● Taper Pin Reamer, Left Hand Spiral Flute ● (Taper: 1/4” per foot)

● Alésoir machine cône morse conique ● Escariadores para pasadores cónicos


4588 - 4600

4588

■

●

nomØ

dsmallØInch

dlargeØInch

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

7/0 0.0497 0.0666 5/64 13/16 1.13/16 2 50111576/0 0.0611 0.0810 3/32 15/16 1.15/16 2 50111585/0 0.0719 0.0966 7/64 1.3/16 2.3/16 2 50111594/0 0.0869 0.1142 1/8 1.5/16 2.5/16 2 50111603/0 0.1029 0.1300 9/64 1.5/16 5.5/16 2 50111612/0 0.1137 0.1462 5/32 1.9/16 2.9/16 3 50111620 0.1287 0.1638 11/64 1.11/16 5.15/16 3 50111631 0.1447 0.1798 3/16 1.11/16 2.15/16 3 50111642 0.1600 0.2010 13/64 1.15/16 3.3/16 3 50111653 0.1813 0.2294 15/64 2.5/16 3.11/16 3 50111664 0.2071 0.2600 17/64 2.9/16 4.1/16 3 50111675 0.2410 0.2994 5/16 2.13/16 4.5/16 3 50111686 0.2773 0.3540 23/64 3.11/16 5.7/16 3 50111697 0.3297 0.4220 13/32 4.7/16 6.5/16 3 50111708 0.3971 0.5050 7/16 5.3/16 7.3/16 3 50111719 0.4800 0.6066 9/16 6.1/16 8.5/16 4 501117210 0.5799 0.7216 5/8 6.13/16 9.5/16 4 5011173

● Taper Pin Reamer, Left Hand Spiral Flute● (Taper: 1/4” per foot)

● Alésoir machine cône morse conique ● Escariadores para pasadores cónicos

4600

■

●

nomØInch

dsmallØInch

dlargeØInch

d2ØInch

l2Inch

l1Inch

Square Sizemm

# Flutes

EDP #

1/8 0.3160 0.3620 0.4375 3/4 2.1/8 0.3280 6 18100071/4 0.4060 0.4720 0.5625 1.1/16 2.7/16 0.4210 6 18100083/8 0.5400 0.6060 0.7000 1.1/16 2.9/16 0.5310 8 18100091/2 0.6650 0.7510 0.6875 1.3/8 3.1/8 0.5150 8 18100103/4 0.8760 0.9620 0.9063 1.3/8 3.1/4 0.6790 10 18100111“ 1.1030 1.2120 1.1250 1.3/4 3.3/4 0.8430 10 18100121.1/4 1.4440 1.5530 1.3125 1.3/4 4“ 0.9840 10 18100131.1/2 1.6840 1.7930 1.5000 1.3/4 4.1/4 1.1250 10 18100142“ 2.1590 2.2680 1.8750 1.3/4 4.1/2 1.4060 12 1810015

● Taper Pipe Reamer, Left Hand Spiral Flute● (Taper: 3/4” per foot)


4537

4537

■

●

d1ØInch

d1decimalInch

MTS

l2Inch

l1Inch

# Flutes

EDP #

1/4 0.2500 1 1.1/2 6“ 6 50101405/16 0.3125 1 1.1/2 6“ 6 50101423/8 0.3750 1 1.3/4 7“ 6 50101447/16 0.4375 1 1.3/4 7“ 6 50101461/2 0.5000 1 2“ 8“ 6 50101489/16 0.5625 1 2“ 8“ 8 50101505/8 0.6250 2 2.1/4 9“ 8 501015211/16 0.6875 2 2.1/4 9“ 8 50101543/4 0.7500 2 2.1/2 9.1/2 8 501015613/16 0.8125 2 2.1/2 9.1/2 8 50101587/8 0.8750 2 2.5/8 10“ 8 501016015/16 0.9375 3 2.5/8 10“ 8 50101621“ 1.0000 3 2.3/4 10.1/2 8 50101641.1/16 1.0625 3 2.3/4 10.1/2 8 50101651.1/8 1.1250 3 2.7/8 11“ 10 50101661.3/16 1.1875 3 2.7/8 11“ 10 50101671.1/4 1.2500 4 3“ 11.1/2 10 50101681.5/16 1.3125 4 3“ 11.1/2 10 50101691.3/8 1.3750 4 3.1/4 12“ 10 50101701.7/16 1.4375 4 3.1/4 12“ 10 50101711.1/2 1.5000 4 3.1/2 12.1/2 10 5010172

● Chucking Reamer● Taper Shank Right Hand Spiral Flute



4536

4536

■

●

d1ØInch

d1decimalInch

MTS

l2Inch

l1Inch

# Flutes

EDP #

1/4 0.2500 1 1.1/2 6“ 6 50107349/32 0.2813 1 1.1/2 6“ 6 50107355/16 0.3125 1 1.1/2 6“ 6 501073611/32 0.3437 1 1.1/2 6“ 6 50107373/8 0.3750 1 1.3/4 7“ 6 501073813/32 0.4062 1 1.3/4 7“ 6 50107397/16 0.4375 1 1.3/4 7“ 6 501074015/32 0.4687 1 1.3/4 7“ 6 50107411/2 0.5000 1 2“ 8“ 6 501074217/32 0.5312 1 2“ 8“ 6 50107439/16 0.5625 1 2“ 8“ 8 501074419/32 0.5938 1 2“ 8“ 8 50107455/8 0.6250 2 2.1/4 9“ 8 501074621/32 0.6562 2 2.1/4 9“ 8 501074711/16 0.6875 2 2.1/4 9“ 8 501074823/32 0.7188 2 2.1/4 9“ 8 50107493/4 0.7500 2 2.1/2 9.1/2 8 501075025/32 0.7812 2 2.1/2 9.1/2 8 501075113/16 0.8125 2 2.1/2 9.1/2 8 501075227/32 0.8438 2 2.1/2 9.1/2 8 50107537/8 0.8750 2 2.5/8 10“ 8 501075429/32 0.9062 2 2.5/8 10“ 8 501075515/16 0.9375 3 2.5/8 10“ 8 501075631/32 0.9688 3 2.5/8 10“ 8 50107571“ 1.0000 3 2.3/4 10.1/2 8 50107581.1/16 1.0625 3 2.3/4 10.1/2 8 50107591.1/8 1.1250 3 2.7/8 11“ 10 50107601.3/16 1.1875 3 2.7/8 11“ 10 50107611.1/4 1.2500 4 3“ 11.1/2 10 50107621.5/16 1.3125 4 3“ 11.1/2 10 50107631.3/8 1.3750 4 3.1/4 12“ 10 50107641.7/16 1.4375 4 3.1/4 12“ 10 50107651.1/2 1.5000 4 3.1/2 12.1/2 10 5010766

● Chucking Reamer● Taper Shank



d1ØInch

d1decimalInch MTS

l2

Inch

l1

Inch # Flutes

EDP #ore-Code

2“ 2.0000 5 2.1/2 14“ 12 50108582.1/8 2.1250 5 2.1/4 14.1/2 12 50108602.1/4 2.2500 5 2.1/4 14.1/2 12 50108622.3/8 2.3750 5 3“ 15 12 50108642.1/2 2.5000 5 3“ 15 12 5010866

4532

4532

■

●

d1ØInch

d1decimalInch

MTS

l2Inch

l1Inch

# Flutes

EDP #

3/8 0.3750 1 3/4 7“ 6 501120613/32 0.4062 1 3/4 7“ 6 50112077/16 0.4375 1 7/8 7“ 6 501082015/32 0.4687 1 7/8 7“ 6 50108211/2 0.5000 1 1“ 8“ 6 501082217/32 0.5312 1 1“ 8“ 6 50108239/16 0.5625 1 1.1/8 8“ 6 501082419/32 0.5938 1 1.1/8 8“ 6 50108255/8 0.6250 2 1.1/4 9“ 6 501082621/32 0.6562 2 1.1/4 9“ 6 501082711/16 0.6875 2 1.1/4 9“ 6 501082823/32 0.7188 2 1.1/4 9“ 6 50108293/4 0.7500 2 1.3/8 9.1/2 6 501083025/32 0.7812 2 1.3/8 9.1/2 6 501083113/16 0.8125 2 1.3/8 9.1/2 6 501083227/32 0.8438 2 1.3/8 9.1/2 6 50108337/8 0.8750 2 1.1/2 10“ 6 501083429/32 0.9062 2 1.1/2 10“ 6 501083515/16 0.9375 3 1.1/2 10“ 6 501083631/32 0.9688 3 1.1/2 10“ 6 50108371“ 1.0000 3 1.5/8 10.1/2 8 50108381.1/32 1.0312 3 1.5/8 10.1/2 8 50108391.1/16 1.0625 3 1.5/8 10.1/2 8 50108401.3/32 1.0937 3 1.5/8 10.1/2 8 50108411.1/8 1.1250 3 1.3/4 11“ 8 50108421.5/32 1.1562 3 1.3/4 11“ 8 50108431.3/16 1.1875 3 1.3/4 11“ 8 50108441.7/32 1.2187 3 1.3/4 11“ 8 50108451.1/4 1.2500 4 1.7/8 11.1/2 8 50108461.5/16 1.3125 4 1.7/8 11.1/2 8 50108471.3/8 1.3750 4 2“ 12“ 8 50108481.7/16 1.4375 4 2“ 12“ 10 50108491.1/2 1.5000 4 2.1/8 12.1/2 10 50108501.5/8 1.6250 4 2.1/4 13“ 10 50108521.3/4 1.7500 5 2.3/8 13.1/2 10 50108541.7/8 1.8750 5 2.1/2 14“ 12 5010856

● Chucking Reamer● Taper Shank Expansion



4579

4579

■

●

d1ØInch

dsmallØInch

dlargeØInch

MTS

l2Inch

l1Inch

# Flutes

EDP #

d1ØInch

dsmallØInch

dlargeØInch

MTS

l2Inch

l1Inch

# Flutes

EDP #

● Bridge Reamer● Taper shank, RIght-hand spiral flute

● Alésoirs de chaudronnerie queue cône morse ● Escariador de mango cónico

4608

4608

■

●

d1ØInch

angle

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

1/4 100 3/16 3/4 1.1/2 3 50111083/8 100 1/4 7/8 1.3/4 3 50111091/2 100 3/8 1“ 2“ 3 50111105/8 100 3/8 1“ 2.1/4 3 50111113/4 100 1/2 1.1/4 2.5/8 3 50111121/4 60 3/16 3/4 1.1/2 3 50110933/8 60 1/4 7/8 1.3/4 3 50110941/2 60 3/8 1“ 2“ 3 50110955/8 60 3/8 1“ 2.1/4 3 50110963/4 60 1/2 1.1/4 2.5/8 3 5011097

d1ØInch

angle

d2ØInch

l2Inch

l1Inch

# Flutes

EDP #

1/4 82 3/16 3/4 1.1/2 3 50110983/8 82 1/4 7/8 1.3/4 3 50110991/2 82 3/8 1“ 2“ 3 50111005/8 82 3/8 1“ 2.1/4 3 50111013/4 82 1/2 1.1/4 2.5/8 3 50111021/4 90 3/16 3/4 1.1/2 3 50111033/8 90 1/4 7/8 1.3/4 3 50111043/4 90 1/2 1.1/4 2.5/8 3 50111071/2 90 3/8 1“ 2“ 3 50111055/8 90 3/8 1“ 2.1/4 3 5011106

● Center reamer● 3-flute countersink● 60°, 82° and 100° included angles

1/2 9/32 1/2 2 5.1/8 9 4 50110569/16 11/32 9/16 2 5.1/8 9 4 50110575/8 3/8 5/8 2 6.1/8 10 4 501105811/16 25/64 11/16 3 7.1/8 11.3/4 4 50110593/4 7/16 3/4 3 7.3/8 12 4 501106013/16 1/2 13/16 3 7.3/8 12 4 50110617/8 9/16 7/8 3 7.3/8 12 4 5011062

1.5/16 1“ 1.5/16 4 7.3/8 13 4 5011069

1“ 11/16 1“ 3 7.3/8 12 4 501106415/16 5/8 15/16 3 7.3/8 12 4 5011063

1.1/8 13/16 1.1/8 3 7.3/8 12 4 50110661.1/16 3/4 1.1/16 3 7.3/8 12 4 5011065

1.1/4 15/16 1.1/4 4 7.3/8 13 4 50110681.3/16 7/8 1.3/16 3 7.3/8 12 4 5011067

7/16 1/4 7/16 2 4.3/8 8.1/4 4 5011055


SS300 - SS400● Core Drill● Taper length, 3-flute

● Forets aléseurs 3 lèvres Queue cylindrique ● Brocas escariadoras

d1ØInch

d1decimalInch

l2Inch

l1Inch

EDP #

1/4 0.2500 3.3/4 6.1/8 0540169/32 0.2812 3.7/8 6.1/4 0540185/16 0.3125 4“ 6.3/8 05402011/32 0.3438 4.1/8 6.1/2 0540223/8 0.3750 4.1/4 6.3/4 05402413/32 0.4062 4.3/8 7“ 0540267/16 0.4375 4.5/8 7.1/4 05402815/32 0.4688 4.3/4 7.1/2 0540301/2 0.5000 4.3/4 7.3/4 05403217/32 0.5312 4.3/4 8“ 0540349/16 0.5625 4.7/8 8.1/4 05403619/32 0.5938 4.7/8 8.3/4 0540385/8 0.6250 4.7/8 8.3/4 05404021/32 0.6562 5.1/8 9“ 05404211/16 0.6875 5.3/8 9.1/4 05404423/32 0.7188 5.5/8 9.1/2 0540463/4 0.7500 5.7/8 9.3/4 05404825/32 0.7812 6“ 9.7/8 05405013/16 0.8125 6.1/8 10“ 05405227/32 0.8438 6.1/8 10“ 0540547/8 0.8750 6.1/8 10“ 05405629/32 0.9062 6.1/8 10“ 05405815/16 0.9375 6.1/8 10.3/4 05406031/32 0.9688 6.3/8 11“ 0540621“ 1.0000 6.3/8 11“ 054100

SS400

■ ●

● Core Drill● Taper length, 4-flute

● Forets aléseurs 4 lèvres Queue cylindrique ● Brocas escariadoras

■ ●

d1ØInch

d1decimalInch

l2Inch

l1Inch

EDP #ore-Code

1/4 0.2500 3.3/4 6.1/8 0530169/32 0.2812 3.7/8 6.1/4 0530185/16 0.3125 4“ 6.3/8 05302011/32 0.3438 4.1/8 6.1/2 0530223/8 0.3750 4.1/4 6.3/4 05302413/32 0.4062 4.3/8 7“ 0530267/16 0.4375 4.5/8 7.1/4 05302815/32 0.4688 4.3/4 7.1/2 0530301/2 0.5000 4.3/4 7.3/4 0530329/16 0.5625 4.7/8 8.1/4 0530365/8 0.6250 4.7/8 8.3/4 053040

SS300


T400● Forets aléseurs 4 lèvres Queue cylindrique DIN1809● Core drill

● Taper shank, 4-flute● Brocas escariadoras

T400

■

●

d1 ØInch

d1 decimalInch

l2Inch

l1Inch

MTS

EDP #

1/2 0.5000 4.3/8 8.1/4 2 02453217/32 0.5312 4.5/8 8.1/2 2 0245349/16 0.5625 4.7/8 8.3/4 2 02453619/32 0.5938 4.7/8 8.3/4 2 0245385/8 0.6250 4.7/8 8.3/4 2 02454021/32 0.6562 5.1/8 9“ 2 02454211/16 0.6875 5.3/8 9.1/4 2 02454423/32 0.7188 5.5/8 9.1/2 2 0245463/4 0.7500 5.7/8 9.3/4 2 02454825/32 0.7812 6“ 9.7/8 2 02455013/16 0.8125 6.1/8 10.3/4 3 02455227/32 0.8438 6.1/8 10.3/4 3 0245547/8 0.8750 6.1/8 10.3/4 3 02455629/32 0.9062 6.1/8 10.3/4 3 02455815/16 0.9375 6.1/8 10.3/4 3 02456031/32 0.9688 6.3/8 11“ 3 0245621“ 1.0000 6.3/8 11“ 3 0246001.1/32 1.0312 6.1/2 11.1/8 3 0246021.1/16 1.0625 6.5/8 11.1/4 3 0246041.3/32 1.0938 6.7/8 12.1/2 4 0246061.1/8 1.1250 7.1/8 12.3/4 4 0246081.5/32 1.1562 7.1/4 12.7/8 4 0246101.3/16 1.1875 7.3/8 13“ 4 0246121.7/32 1.2188 7.1/2 13.1/8 4 0246141.1/4 1.2500 7.7/8 13.1/2 4 0246161.9/32 1.2812 8.1/2 14.1/8 4 0246181.5/16 1.3125 8.5/8 14.1/4 4 0246201.11/32 1.3438 8.3/4 14.3/8 4 0246221.3/8 1.3750 8.7/8 14.1/2 4 0246241.13/32 1.4062 9“ 14.5/8 4 0246261.7/16 1.4375 9.1/8 14.3/4 4 0246281.15/32 1.4688 9.1/4 14.7/8 4 0246301.1/2 1.5000 9.3/8 15“ 4 0246321.17/32 1.5312 9.3/8 16.3/8 5 0246341.9/16 1.5625 9.5/8 16.5/8 5 0246361.19/32 1.5938 9.7/8 16.7/8 5 0246381.5/8 1.6250 10“ 17“ 5 0246401.21/32 1.6562 10.1/8 17.1/8 5 0246421.11/16 1.6875 10.1/8 17.1/8 5 0246441.23/32 1.7188 10.1/8 17.1/8 5 0246461.3/4 1.7500 10.1/8 17.1/8 5 0246481.25/32 1.7812 10.1/8 17.1/8 5 0246501.13/16 1.8125 10.1/8 17.1/8 5 0246521.27/32 1.8438 10.1/8 17.1/8 5 024654


● Fraises pour logement de tête de vis

T400

4702

4702

■●

d1ØInch

l2Inch

l1Inch

d2ØInch

#Flutes

pilotØInch

pilotØlow

pilotØhigh

EDP #

23/32 1.1/2 5.3/8 1/2 3 1/4 5/16 21/32 62100463/4 1.1/2 5.3/8 1/2 3 1/4 5/16 11/16 621004725/32 1.1/2 5.3/8 5/8 3 1/4 5/16 23/32 621004813/16 1.1/2 5.3/8 5/8 3 1/4 5/16 3/4 621004927/32 1.1/2 5.3/8 3/4 3 1/4 5/16 25/32 62100507/8 1.1/2 5.3/8 3/4 3 1/4 5/16 13/16 621005129/32 1.1/2 6.1/8 3/4 3 1/4 5/16 27/32 621005215/16 1.1/2 6.1/8 3/4 3 1/4 5/16 7/8 621005331/32 1.3/4 6.3/8 3/4 3 5/16 3/8 29/32 62100541 1.3/4 6.3/8 3/4 3 5/16 3/8 15/16 62100551.1/16 1.3/4 6.3/8 3/4 3 5/16 3/8 1 62100561.1/8 1.3/4 6.3/8 1“ 3 5/16 3/8 1.1/16 62100571.3/16 1.3/4 6.3/8 1“ 3 5/16 3/8 1.1/8 6210058

● Counterbore ● Refrentadores● Short series, interchangeable pilot type

d2

1/4 3/4 3.13/16 15/64 3 3/32 1/8 3/16 62100319/32 3/4 3.13/16 17/64 3 3/32 1/8 7/32 62100325/16 3/4 3.13/16 19/64 3 3/32 1/8 1/4 621003311/32 3/4 3.13/16 5/16 3 3/32 1/8 9/32 62100343/8 1.000 4.1/16 5/16 3 5/32 3/16 5/16 621003513/32 1.000 4.1/16 3/8 3 5/32 3/16 11/32 62100367/16 1.000 4.1/16 3/8 3 5/32 3/16 3/8 621003715/32 1.1/4 4.5/16 7/16 3 3/16 3/16 13/32 62100381/2 1.1/4 4.5/16 7/16 3 3/16 3/16 7/16 621003917/32 1.1/4 4.5/16 1/2 3 3/16 3/16 15/32 62100409/16 1.1/4 4.5/16 1/2 3 3/16 3/16 1/2 621004119/32 1.1/4 5.1/8 1/2 3 3/16 3/16 17/32 62100425/8 1.1/4 5.1/8 1/2 3 3/16 3/16 9/16 621004321/32 1.1/4 5.1/8 1/2 3 3/16 3/16 19/32 621004411/16 1.1/4 5.1/8 1/2 3 3/16 3/16 5/8 6210045

p Ø

1.7/8 1.8750 10.3/8 17.3/8 5 0246561.29/32 1.9062 10.3/8 17.3/8 5 0246581.15/16 1.9375 10.3/8 17.3/8 5 0246601.31/32 1.9688 10.3/8 17.3/8 5 0246622“ 2.0000 10.3/8 17.3/8 5 0247002.1/8 2.1250 10.1/4 17.3/8 5 0247082.1/4 2.2500 10.1/8 17.3/8 5 0247162.3/8 2.3750 10.1/8 17.3/8 5 0247242.1/2 2.5000 11.1/4 18.3/4 5 024732

d1ØInch

d1decimalInch

l2Inch

l1Inch

MTS EDP # ore-Code


● Fraises pour logement de tête de vis

4703● Counterbore ● Refrentadores● Short series, interchangeable pilot type

4702d1ØInch

l2Inch

l1Inch

d2ØInch

#Flutes

pilotØInch

pilotØlow

pilotØhigh

EDP #ore-Code

1.3/4 2.1/4 8.1/8 1.1/4 5 7/16 1/2 1.11/16 62100631.7/8 2.1/4 8.1/8 1.1/2 5 7/16 1/2 1.13/16 62100642 2.1/2 8.3/8 1.1/2 5 1/2 9/16 1.15/16 6210065

1.1/4 2 6.5/8 1“ 5 3/8 7/16 1.3/16 62100591.3/8 2 6.5/8 1“ 5 3/8 7/16 1.5/16 62100601.1/2 2 7.7/8 1.1/4 5 3/8 7/16 1.7/16 62100611.5/8 2.1/4 8.1/8 1.1/4 5 7/16 1/2 1.9/16 6210062

p Ø

4703

■

●

d1ØInch

l2Inch

l1Inch

neck ØInch

d3ØInch

#Flutes

pilotØInch

pilotØlow

MTS

pilotØhigh

EDP #

1/4 3/4 3.13/16 15/64 2.9/16 3 3/32 1/8 1 3/16 62100665/16 3/4 3.13/16 19/64 2.9/16 3 3/32 1/8 1 1/4 62100683/8 1.000 4.1/16 11/32 2.9/16 3 5/32 3/16 1 5/16 62100707/16 1.000 4.1/16 13/32 2.9/16 3 5/32 3/16 1 3/8 62100721/2 1.1/4 4.5/16 29/64 2.9/16 3 3/16 1/4 1 7/16 62100749/16 1.1/4 4.5/16 29/64 2.9/16 3 3/16 1/4 1 1/2 62100765/8 1.1/4 5.1/8 9/16 3.1/8 3 3/16 1/4 2 9/16 621007811/16 1.1/4 5.1/8 5/8 3.1/8 3 3/16 1/4 2 5/8 62100803/4 1.1/2 5.3/8 21/32 3.1/8 3 1/4 5/16 2 11/16 621008213/16 1.1/2 5.3/8 21/32 3.1/8 3 1/4 5/16 2 3/4 62100847/8 1.1/2 5.3/8 21/32 3.1/8 3 1/4 5/16 2 13/16 621008515/16 1.1/2 6.1/8 7/8 3.7/8 3 1/4 5/16 2 7/8 62100861” 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 15/16 62100871.1/16 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 1 62100881.1/8 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 1.1/16 62100891.3/16 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 1.1/8 62100901.1/4 2 6.5/8 7/8 3.7/8 5 3/8 7/16 3 1.3/16 62100911.5/16 2 6.5/8 7/8 3.7/8 5 3/8 7/16 3 1.1/4 62100921.3/8 2 6.5/8 7/8 3.7/8 5 3/8 7/16 3 1.5/16 62100931.1/2 2 7.7/8 1.3/16 4.7/8 5 3/8 7/16 4 1.7/16 62100941.5/8 2.1/4 8.1/8 1.3/8 4.7/8 5 7/16 1/2 4 1.9/16 62100951.3/4 2.1/4 8.1/8 1.3/8 4.7/8 5 7/16 1/2 4 1.11/16 62100961.7/8 2.1/4 8.1/8 1.1/2 4.7/8 5 7/16 1/2 4 1.13/16 62100972” 2.1/2 8.3/8 1.1/2 4.7/8 5 1/2 9/16 4 1.5/16 62100982.1/8 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.1/16 62100992.1/4 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.3/16 62101002.3/8 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.5/16 62101012.1/2 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.7/16 6210102


4700

4700

■

●

d1ØInch

l2Inch

l1Inch

d2 ØInch

l3Inch

neck ØInch

#Flutes

pilotØInch

pilotØlow

pilotØhigh

EDP #

● Long series● Counterbore ● Fraises pour logement de tête de vis ● Refrentadores

■●

d1ØInch

l2Inch

l1Inch

d2ØInch

l3Inch

neckØInch

#Flutes

pilotØInch

pilotØlow

pilotØhigh

EDP #

1/4 1/2 2.3/8 1/4 1.1/8 15/64 4 3/32 1/8 3/16 62101379/32 1/2 2.3/8 1/4 1.1/8 0.2560 4 3/32 1/8 7/32 62101385/16 1/2 2.3/8 1/4 7/8 17/64 4 3/32 1/8 1/4 621013911/32 1/2 2.3/8 1/4 7/8 19/64 4 3/32 1/8 9/32 62101403/8 1/2 2.3/8 1/4 7/8 5/16 4 3/32 3/16 5/16 621014113/32 1/2 2.13/16 1/4 7/8 5/16 4 1/8 3/16 11/32 62101427/16 1/2 2.13/16 1/4 7/8 5/16 4 1/8 3/16 3/8 621014315/32 1/2 2.13/16 1/4 7/8 5/16 4 1/8 1/4 13/32 62101441/2 1/2 2.13/16 1/4 7/8 3/8 4 1/8 1/4 7/16 621014517/32 1/2 2.13/16 1/4 7/8 3/8 4 1/8 1/4 15/32 62101469/16 1/2 2.13/16 1/4 7/8 3/8 4 1/8 1/4 1/2 62101475/8 1/2 2.13/16 1/4 7/8 1/2 4 1/8 1/4 9/16 621014911/16 1/2 2.13/16 1/4 7/8 1/2 4 1/8 1/4 5/8 62101513/4 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 11/16 621015313/16 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 3/4 62101557/8 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 13/16 621015715/16 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 7/8 62101591“ 1/2 2.13/16 1/4 7/8 1/2 4 3/16 3/8 15/16 6210161

4706● Aircraft short series● Designed for pneumatic or

electric drills ● Interchangeable pilot type

● Counterbore ● Fraises pour logement de tête de vis ● Refrentadores

d2

l3

d2

l3

1/4 3/4 5.3/4 15/64 2.1/4 15/64 3 3/32 1/8 3/16 62100015/16 3/4 5.3/4 3/8 2.1/4 19/64 3 3/32 1/8 1/4 62100033/8 1.000 5.3/4 3/8 2.1/4 11/32 3 5/32 3/16 5/16 62100057/16 1.000 6.1/8 7/16 2.1/4 13/32 3 5/32 3/16 3/8 62100071/2 1.1/4 6.3/8 1/2 2.1/2 15/32 3 3/16 1/4 7/16 62100099/16 1.1/4 6.1/2 1/2 2.1/2 15/32 3 3/16 1/4 1/2 62100105/8 1.1/4 7“ 5/8 1.5/8 9/16 3 3/16 1/4 9/16 62100113/4 1.1/2 7.1/4 3/4 2.3/4 11/16 3 1/4 5/16 11/16 62100137/8 1.1/2 7.3/4 7/8 3“ 3/4 3 1/4 5/16 13/16 62100151“ 1.3/4 9“ 1“ 3“ 7/8 3 5/16 3/8 15/16 6210017

p Ø

p Ø


4705

■

●

d1Ø Inch

l2Inch

l1Inch

d2 ØInch

l3Inch

neck ØInch

#Flutes

pilotØ Inch

pilotØ low

pilotØ high

EDP #

21/32 1.1/4 5.3/8 1/2 3.5/8 9/16 3 3/16 1/4 19/32 621012011/16 1.1/4 5.3/8 1/2 3.5/8 5/8 3 3/16 1/4 5/8 621012123/32 1.1/4 5.3/8 1/2 3.5/8 5/8 3 3/16 5/16 21/32 62101223/4 1.1/4 5.3/8 1/2 3.5/8 11/16 3 3/16 5/16 11/16 621012325/32 1.1/4 5.3/8 1/2 3.5/8 11/16 3 3/16 5/16 23/32 621012413/16 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 5/16 3/4 62101257/8 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 5/16 13/16 621012615/16 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 5/16 7/8 62101271 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 3/8 15/16 62101281.1/16 1.1/4 5.3/8 1/2 3.5/8 15/16 3 3/16 3/8 1 62101291.1/8 1.1/4 5.3/8 1/2 3.5/8 15/16 3 3/16 3/8 1.1/16 62101301.3/16 1.1/4 5.3/8 1/2 3.5/8 15/16 3 3/16 3/8 1.1/8 62101311.1/4 1.1/4 5.3/8 1/2 3.5/8 1“ 5 3/16 7/16 1.3/16 62101321.5/16 1.1/4 5.3/8 1/2 3.5/8 1“ 5 1/4 9/32 1“ 62101331.3/8 1.1/4 5.3/8 1/2 3.5/8 1“ 5 1/4 9/32 1“ 62101341.7/16 1.1/4 5.3/8 1/2 3.5/8 1.1/8 5 1/4 9/32 1 62101351.1/2 1.1/4 5.3/8 1/2 3.5/8 1.1/8 5 1/4 9/32 1 6210136

● Aircraft long series● Interchangeable pilot type

● Counterbore ● Fraises pour logement de tête de vis ● Refrentadores

4705

d2

l3

1/4 3/4 3.13/16 15/64 3.1/16 15/64 3 3/32 1/8 3/16 62101079/32 3/4 3.13/16 17/64 3.1/16 17/64 3 3/32 1/8 7/32 62101085/16 3/4 3.13/16 19/64 3.1/16 19/64 3 3/32 1/8 1/4 621010911/32 3/4 3.13/16 5/16 3.1/16 5/16 3 3/32 1/8 9/32 62101103/8 3/4 3.13/16 5/16 3.1/16 5/16 3 3/32 3/16 5/16 621011113/32 3/4 3.13/16 3/8 3.1/16 3/8 3 1/8 3/16 11/32 62101127/16 3/4 3.13/16 3/8 3.1/16 3/8 3 1/8 3/16 3/8 621011315/32 3/4 3.13/16 7/16 3.1/16 7/16 3 1/8 1/4 13/32 62101141/2 3/4 3.13/16 7/16 3.1/16 7/16 3 1/8 1/4 7/16 621011517/32 3/4 5.3/8 1/2 4.5/8 1/2 3 1/8 1/4 15/32 62101169/16 3/4 5.3/8 1/2 4.5/8 1/2 3 1/8 1/4 1/2 621011719/32 3/4 5.3/8 1/2 4.3/16 9/16 3 1/8 1/4 17/32 6210118 5/8 3/4 5.3/8 1/2 4.3/16 9/16 3 1/8 1/4 9/16 6210119

p Ø


● Detachable Pilot ● Pilote ● Guía desmontable para Refrentador

4704

4704

PilotØInch /

d1ØInch

EDP #

3/32 3/32 321023540 3/32 32102361/8 3/32 321011430 3/32 32102385/32 3/32 321011521 3/32 321024020 3/32 321024119 3/32 32102423/16 3/32 321011611 3/32 321024410 3/32 32102457/32 3/32 32101171/4 3/32 3210118F 3/32 32102481/8 1/8 321024930 1/8 32102505/32 1/8 321025121 1/8 321025220 1/8 321025319 1/8 32102543/16 1/8 321025511 1/8 321025610 1/8 32102577/32 1/8 32102581/4 1/8 3210259F 1/8 32102609/32 1/8 32102615/16 1/8 32102623/8 1/8 32102637/16 1/8 32102641/2 1/8 32102659/16 1/8 32102665/8 1/8 32102673/16 5/32 32101197/32 5/32 32101201/4 5/32 32101219/32 5/32 32101225/16 5/32 32101233/8 5/32 32101243/16 3/16 321028111 3/16 321028210 3/16 32102837/32 3/16 32102841/4 3/16 3210125F 3/16 32102869/32 3/16 32102875/16 3/16 321012611/32 3/16 3210444

PilotØInch /

d1ØInch

EDP #

3/8 3/16 321012713/32 3/16 32104457/16 3/16 321012815/32 3/16 32104461/2 3/16 32101299/16 3/16 32101305/8 3/16 321013111/16 3/16 32102943/4 3/16 321029513/16 3/16 32102967/8 3/16 321029715/16 3/16 32102981“ 3/16 32102991/4 1/4 3210300F 1/4 32103019/32 1/4 32103025/16 1/4 32101323/8 1/4 32101337/16 1/4 32101341/2 1/4 321013517/32 1/4 32104479/16 1/4 32101365/8 1/4 321013711/16 1/4 32101383/4 1/4 321013913/16 1/4 32101407/8 1/4 321014115/16 1/4 32103131“ 1/4 32103143/8 5/16 32101427/16 5/16 32101431/2 5/16 32101449/16 5/16 32101455/8 5/16 321014611/16 5/16 32101473/4 5/16 321014813/16 5/16 32101497/8 5/16 321015015/16 5/16 32101511“ 5/16 32101521.1/16 5/16 32101531.1/8 5/16 32101547/16 3/8 32101551/2 3/8 32101569/16 3/8 32101575/8 3/8 321015811/16 3/8 32101593/4 3/8 3210160


4704PilotØInch /

d1ØInch

EDP #

13/16 3/8 32101617/8 3/8 321016215/16 3/8 32101631“ 3/8 32101641.1/16 3/8 32101651.1/8 3/8 32101661.3/16 3/8 32101671.1/4 3/8 32101681.5/16 3/8 32101691.3/8 3/8 32101701.7/16 3/8 32101711/2 7/16 32101729/16 7/16 32101735/8 7/16 321017411/16 7/16 32101753/4 7/16 321017613/16 7/16 32101777/8 7/16 321017815/16 7/16 32101791“ 7/16 32101801.1/16 7/16 32101811.1/8 7/16 32101821.3/16 7/16 32101831.1/4 7/16 32101841.5/16 7/16 32101851.3/8 7/16 3210186

PilotØInch /

d1ØInch

EDP #

9/16 1/2 32101955/8 1/2 321019611/16 1/2 32101973/4 1/2 321019813/16 1/2 32101997/8 1/2 321020015/16 1/2 32102011“ 1/2 32102021.1/16 1/2 32102031.1/8 1/2 32102041.3/16 1/2 32102051.1/4 1/2 32102061.5/16 1/2 32102071.3/8 1/2 32102081.7/16 1/2 32102091.1/2 1/2 32102101.9/16 1/2 32102111.5/8 1/2 32102121.11/16 1/2 32102131.3/4 1/2 32102141.13/16 1/2 32102151.15/16 1/2 32102171.7/8 1/2 32102162“ 1/2 3210218

● Fraise à ébavurer et à chanfreiner

4602

4602

■

●

d1ØInch angle

d2ØInch

l2Inch

l1Inch

#Flutes

EDP #

1/2 60 1/2 1.5/8 3.7/8 4 47105885/8 60 1/2 1.3/4 4“ 4 47105893/4 60 1/2 1.7/8 4.1/8 4 47105907/8 60 1/2 2“ 4.1/4 4 4710591

d1ØInch angle

d2ØInch

l2Inch

l1Inch

#Flutes

EDP #

5/8 82 1/2 1.3/4 4“ 4 47105943/4 82 1/2 1.7/8 4.1/8 4 47105957/8 82 1/2 2“ 4.1/4 4 47105961“ 82 1/2 2.1/8 4.3/8 4 4710597

● 60° and 82° included angles● 4-flute Countersink ● Avellanadores

1/2 82 1/2 1.5/8 3.7/8 4 4710593

1“ 60 1/2 2.1/8 4.3/8 4 4710592


● 3-Flute Countersink ● Fraise à ébavurer et à chanfreiner ● Avellanadores

G135

■●

maxd mm

mind

l1mm

d2 Ømm

# Flutes

Stock #

EDP #ore-Code

6.3 1.6 45 5 3 0108482 G1356.38.0 2.0 50 6 3 0108499 G1358.010.0 2.5 50 6 3 0144817 G13510.012.5 3.2 56 8 3 0108444 G13512.5

maxd mm

mind

l1mm

d2 Ømm

# Flutes

Stock #

EDP #ore-Code

16.0 4.0 63 10 3 0108451 G13516.020.0 5.0 67 10 3 0108468 G13520.025.0 6.3 71 10 3 0108475 G13525.0

4603

4603

■

●

d1 ØInch angle

d2Ømm

l1Inch

EDP #

3/8 60 1/4 1.21/32 47107901/2 60 1/4 1.27/32 47107913/4 60 3/8 2.13/32 47107931“ 60 1/2 2.13/16 47107941.1/4 60 1/2 3.1/2 47107951.1/2 60 1/2 3.7/8 47107961/4 82 3/16 1.7/16 47107973/8 82 1/4 1.21/32 47107981/2 82 1/4 1.27/32 47107995/8 82 3/8 2.3/32 47108003/4 82 3/8 2.13/32 47108011“ 82 1/2 2.13/16 4710802

d1 ØInch angle

d2Ømm

l1Inch

EDP #

1.1/4 82 1/2 3.1/2 47108031.1/2 82 1/2 3.7/8 47108041/4 90 3/16 1.7/16 47108053/8 90 1/4 1.21/32 47108061/2 90 1/4 1.27/32 47108075/8 90 3/8 2.3/32 47108083/4 90 3/8 2.13/32 47108091“ 90 1/2 2.13/16 47108101.1/4 90 1/2 3.1/2 47108111.1/2 90 1/2 3.7/8 4710812

● 60°, 82° and 90° included angles● Single flute Countersink ● Fraise à ébavurer et à chanfreiner ● Avellanadores

G135

d2


G136

■●

maxdmm

mind

l1mm

d2Ømm

# Flutes

Stock #

EDP #ore-Code

4.3 1.3 40 4 3 0108659 G1364.35.0 1.5 40 4 3 0108666 G1365.05.3 1.5 40 4 3 0108673 G1365.35.8 1.5 45 5 3 0108680 G1365.86.0 1.5 45 5 3 0108697 G1366.06.3 1.5 45 5 3 0108703 G1366.37.0 1.8 50 6 3 0108710 G1367.07.3 1.8 50 6 3 0108727 G1367.38.0 2.0 50 6 3 0108734 G1368.08.3 2.0 50 6 3 0108741 G1368.39.4 2.2 50 6 3 0108758 G1369.410.0 2.5 50 6 3 0108505 G13610.010.4 2.5 50 6 3 0108512 G13610.411.5 2.8 56 8 3 0108529 G13611.5

maxdmm

mind

l1mm

d2Ømm

# Flutes

Stock #

EDP #ore-Code

12.4 2.8 56 8 3 0108536 G13612.413.4 2.9 56 8 3 0108543 G13613.415.0 3.2 60 10 3 0108550 G13615.016.5 3.2 60 10 3 0108567 G13616.519.0 3.5 63 10 3 0108574 G13619.020.5 3.5 63 10 3 0108581 G13620.523.0 3.8 67 10 3 0108598 G13623.025.0 3.8 67 10 3 0108604 G13625.026.0 3.8 67 10 3 0108611 G13626.028.0 4.0 71 12 3 0108628 G13628.030.0 4.2 71 12 3 0108635 G13630.031.0 4.2 71 12 0108642 G13631.0

G137

■

●

maxdmm

mind

l1mm

MK(MTS)

# Flutes

Stock #

EDP #ore-Code

16.0 4.0 90 1 3 0108765 G13716.020.0 5.0 106 2 3 0108772 G13720.025.0 6.3 112 2 3 0108789 G13725.031.5 10.0 118 2 3 0108796 G13731.5

maxdmm

mind

l1mm

MK(MTS)

# Flutes

Stock #

EDP #ore-Code

40.0 12.5 150 3 3 0108802 G13740.050.0 16.0 160 3 3 0108819 G13750.063.0 20.0 190 4 3 0108826 G13763.080.0 25.0 200 4 3 0108833 G13780.0

● 3-Flute Countersink ● Fraise à ébavurer et à chanfreiner ● Avellanadores

G136

G137● Fraise à ébavurer et à chanfreiner● 3-Flute Countersink ● Avellanadores


G138 - G154 - G155

■●

maxd mm

mind

l1mm

MK(MTS)

# Flutes

Stock # EDP # ore-Code

15.0 3.2 85 1 3 0108840 G13815.016.5 3.2 85 1 3 0108857 G13816.519.0 3.5 100 2 3 0108864 G13819.020.5 3.5 100 2 3 0108871 G13820.523.0 3.8 106 2 3 0108888 G13823.025.0 3.8 106 2 3 0108895 G13825.026.0 3.8 106 2 3 0108901 G13826.028.0 4.0 112 2 3 0108918 G13828.0

maxd mm

mind

l1mm

MK(MTS)

# Flutes


30.0 4.2 112 2 3 0108925 G13830.031.0 4.2 112 2 3 0108932 G13831.034.0 4.5 118 2 3 0108949 G13834.037.0 4.8 118 2 3 0108956 G13837.040.0 10.0 140 3 3 0108963 G13840.050.0 14.0 150 3 3 0108970 G13850.063.0 16.0 180 4 3 0108987 G13863.080.0 22.0 190 4 3 0108994 G13880.0

● 3-flute Countersink ● Fraise à ébavurer et à chanfreiner ● Avellanadores

■

●

maxd mm

mind

l1mm

MK(MTS)

#Flutes


16.5 3.2 85 1 3 0216958 G15516.520.5 3.5 100 2 3 0216965 G15520.525.0 3.8 106 2 3 0216972 G15525.031.0 4.2 112 2 3 0216989 G15531.0

maxd mm

mind

l1mm

MK(MTS)

#Flutes


40.0 10.0 140 3 3 0216996 G15540.050.0 14.0 150 3 3 0217009 G15550.063.0 16.0 180 4 3 0217016 G15563.080.0 22.0 190 4 3 0217023 G15580.0

G154

■

●

maxd mm

mind

l1mm

d2Ømm

# Flutes


6.3 1.5 45 5 3 0149348 G1546.38.3 2.0 50 6 3 0149355 G1548.310.4 2.5 50 6 3 0149362 G15410.412.4 2.8 56 8 3 0149379 G15412.4

maxd mm

mind

l1mm

d2Ømm

# Flutes


16.5 3.2 60 10 3 0149386 G15416.520.5 3.5 63 10 3 0149393 G15420.525.0 3.8 67 10 3 0149409 G15425.0

G155

G138

Miscellaneous


Screw Extractor1800

Nr.d1Ø Inch

d2Ø Inch

l1Inch EDP#

For Removing Screw Size

#1 0.054 5/32 2“ 3210001 3/32 to 5/32#2 0.086 3/16 2.3/8 3210002 5/32 to 7/32#3 1/8 1/4 2.3/4 3210003 7/32 to 9/32#4 11/64 5/16 3“ 3210004 9/32 to 3/8#5 1/4 7/16 3.3/8 3210005 3/8 to 5/8, 1/8, 1/4 pipe#6 3/8 5/8 3.3/4 3210006 5/8 to 7/8, 3/8 pipe#7 31/64 3/4 4.1/8 3210007 7/8 to 1.1/8, 1/2 pipe#8 47/64 1“ 4.3/8 3210008 1.1/8 to 1.3/8, 3/4 pipe#9 31/32 1.1/4 4.5/8 3210009 1.3/8 and up, 1“ pipe#10 1.7/32 1.17/32 5“ 3210010 2.1/8 to 2.1/2#11 1.15/32 1.27/32 5.5/8 3210011 2.1/2 to 3“#12 1.27/32 2.9/32 6.1/4 3210012 3“ to 3.1/2“

● Barreaux rectifiés● Cuchillas

Tool Bit Blanks

707 (HSS)

Size

OAL

707EDP#

727EDP#

757EDP#

3/16 2.1/2 6310293 6310317 63103051/4 2.1/2 6310294 6310318 63103065/16 2.1/2 6310295 6310319 63103073/8 3“ 6310296 6310320 63103087/16 3.1/2 6310297 6310321 63103091/2 4“ 6310298 6310322 63103105/8 4.1/2 6310299 6310323 63103113/4 5“ 6310300 6310324 63103121“ 7“ 6310302 6310326 6310314

727 (Cobalt)757 (Cobalt Vanadium T-15)

Taper Shank

EDP#

1 32103382 32103393 32103404 32103415 3210342

K=Ext. K1=Int. K=Ext.(externe) K1=Int. (Interne)K=Ext. K1=Int.

K = Nr.

K1 = Nr.

l1Inch

EDP #

2 1 3-1/2 32100463 1 3-15/16 32100474 1 4-13/16 32100483 2 4-3/8 32100504 2 4-13/16 32100514 3 5-5/16 3210053

K = Nr.

K1 = Nr.

l1Inch

EDP #

5 3 6-1/16 32100545 4 6-1/2 32100556 5 8-1/2 3210057

Drill Sleeves430● Cône de réduction● Conos Morse endurecidos y cementados

411

1900

Nr. Style Qty. Description EDP#4 oz 1900 24 Drilling & Tapping Fluid, Squirt Bottle 191050116 oz 1900 12 Drilling & Tapping Fluid, Squirt Bottle 19105021 gal 1900 6 Drilling & Tapping Fluid, Bottle 19105035 gal 1900 1 Drilling & Tapping Fluid, Dispenser 19105065 gal 1900 1 Drilling & Tapping Fluid, Pail 191050455 gal 1900 1 Drilling & Tapping Fluid, Drum 19105051 lb 1900 24 Wax Stick 195050120 oz 1900 12 Aerosal Can - Foam 19105091 gal 1900 6 Light Tapping Fluid, Bottle 193050316 oz 1900 12 Light Tapping Fluid, Squirt Bottle 1930502

● Huile de coupe● Aceite de Corte

Cutting Oil

Drift Keys

● Extracteur d’outils● Expulsores de Brocas

● Extracteur De Vis● Extractor Del Tornillo

1815 (Sets) Style

# inSet

Description EDP#

1800 5 Range: #1 - #5 3210013

1816 (Sets) Style

# inSet

Description EDP#

1800 6 Range: #1 - #6 3210014

● Hardened and ground


Notes


Notes


PRECISION DORMER is a brand of Precision Twist Drill Co., Dormer Tools Inc. and Union Butterfield (“The Company”). The Company warrants to original equipment manufacturers, distributors and industrial and commercial users of its products that each new product manufactured by The Company shall be free from material defects and workmanship for one year after delivery by The Company. The Company’s exclusive obligation under this warranty is limited to furnishing a replacement for, or at its option, repairing or issuing credit for, any product which is, within one year from the date of delivery by The Company, returned freight prepaid to the plant designated by a representative of The Company and which upon inspection is determined by The Company to be materially defective in material or workmanship.

Complete information as to operating conditions, machine setup and application of cutting fluid should accompany any product returned for inspection. All defective products returned to The Company under this warranty shall be The Company’s property. The provisions of this warranty shall not apply to any product of The Company which has been subjected to misuse, improper operating conditions, machine setup, application of cutting fluid, or which has been repaired or altered without authorization from The Company. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EXCEPT AS EXPRESSELY SET FORTH HEREIN, THE COMPANY MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO ANY MATTER WHATSOEVER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

The Company’s sole liability on any claim of any kind, whether in contract, tort, or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of the products sold hereunder shall in no case exceed the amount actually paid to The Company for the applicable products. IN NO EVENT SHALL THE COMPANY BE LIABLE TO ANY ENTITY OR PERSON FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED, ON ANY THEORY OF LIABILITY, AND WHETHER OR NOT THE COMPANY HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES.

The Company neither assumes nor authorizes any other person or firm to assume for it any other obligation or liability in connection with its products. The purchaser acknowledges that there are no warranties implied by custom or usage in the trades of the purchaser or The Company, and that it is customary in the trades of purchaser and The Company that there are to be no warranties, and that any prior dealing between the purchaser and The Company or its authorized distributor does not imply any warranty from The Company. The limitations set forth in this section shall apply notwithstanding any failure of essential purpose of any limited remedy.

Product Warranty

02/09 EDP# LIT7084

Documents

Precision Dormer Main Cat