Practice Project

This is a Revit model that I made for practicing the software following a handbook. It is for a school building which contains a swimming pool, a playground and an office building. Starting from laying out the grid and elevations, I built this model in an organized manner, namely in the sequence of columns, walls, floors, ceilings, roof and stairs. The building facade consists of a curtain system. After finishing these structural works, I started working on architectural work including interior design, furniture layout and landscape setting. Finally, after rendering the model, I created numerous reports regarding sunlight analysis, green design and quantity take-off.

Figure 1. 3D View of the Project

Figure 2. Floor Plans-First Floor

Figure 3. Floor Plans-Rooms of First Floor

Figure 4. Grade Region

Figure 5. Section

Figure 6. 3D Views-Meeting Room

Figure 6. 3D Views-Outside

Figure 6. 3D Views-Stairs

Figure 7. Sunlight Analysis