Powerseriesbrochure

Tel: +44 (0)2920 65 11 36 email: [email protected]

www.aperformance.co.uk

Power Series

Welcome to Absolute Performance Ltd – specialists in bespoke strength and conditioning equipment solutions across a wide range of sports, institutes & establishments.

Inevitably the requirements of each individual customer will vary slightly, either through budget availability, space availability or specifi c training needs. So, it’s paramount that we build a strong relationship with all of our customers to gain a full and comprehensive understanding of what is required to develop the correct solution, fi rst time round.

Understanding the wide variety of requirements, we are proud to offer the Absolute Performance Power Series range of products, which gives the widest selection of power racks, Olympic platforms and associated products in today’s strength & conditioning market.

You should fi nd all you need to know about the Power Series products in the following pages, but don’t hesitate to contact us on

+44 (0)2920 65 11 36 or email us at [email protected] if you need anything more.

Welcome

Power SeriesContentsFull Power Racks Page 2

Half Racks page 2

Open Power Racks Page 3

Double Half Racks Page 3

Power Rack Attachments Page 4

Platforms Page 4

Power Rack Options Page 5

Benches Page 6

Accessories Page 7

Olympic Bars & Plates Page 8

Technique Equipment Page 9

1www.aperformance.co.uk

exclusive uk distributor

MR47: MEGA POWER RACKFeatures● Uprights are made of 4” x 4” seven gauge

laser cut steel tubing● Main frame is made of 3” x 4” quarter inch

wall steel tubing● Built-in Spotter Stands fl ip up and lock

in position● Twelve Weight Storage Pegs (45 lb plates

store at waist height)● Olympic Bar Storage● Two sets of Chin Bars: One set 1 1/4”, One set

2” FAT BAR, (both have neutral and pronated positions)

● Three sets of lower Band Pegs● Upper Band Peg above inside uprights and

upper Band Peg above outside uprights● Two Pegs to store bands and two pegs to

store chains● New “J” Hooks made of HDPE to protect the

knurling of high end bars● Holds 1600 lbs of rubber Olympic plate

Specifi cationsSize 80” W x 76” D x 97” HShipping Weight 875 lbs

MR694: MEGA OPEN RACKFeatures● Uprights are made of 4” x 4” seven gauge


wall steel tubing● Built-in Spotter Stands fl ip up and

lock in position● Twelve Weight Storage Pegs (45 lb plates

store at waist height)● Olympic Bar Storage● Two sets of Chin Bars: One set 1 1/4”,

One set 2” FAT BAR, (both have neutral and pronated positions)

● Three sets of lower Band Pegs● Upper Band Peg above inside uprights and

upper Band Peg above outside uprights● Two Pegs to store band and two pegs

to store chains● New “J” Hooks made of HDPE to protect the

knurling of high end bars● Holds 1600 lbs of rubber Olympic plate


MR691 : MEGA DOUBLE RACKFeatures● Uprights are made of 4” x 4” seven gauge


wall steel tubing● 2 sets of built-in Spotter Stands - each

fl ip up and lock in position● Twenty four Weight Storage Pegs

(45 lb plates store at waist height)● 2 Olympic Bar storage tubes● Four sets of Chin Bars: 2 sets of 1 1/4”,

2 sets of 2” FAT BARS, (all four have neutral and pronated positions)

● Three lower Band Pegs on each side with Magnums unique recessed patent pending design

● Upper Band Pegs on both sides● “J” Hooks made of HDPE to protect

bar knurling● Holds 3200 lbs of rubber Olympic plate


A691 : PRO DOUBLE RACKFeatures● Can be used by two exercisers

at the same time● 4” x 3” seven gauge steel uprights are

laser cut for easy movement of our heavy duty “J” Hook system

● Featuring TWO SETS of fl ip up spotter stands, adjustable safety bars, dual grip chin bar, Olympic bar storage, band storage, and nickel plated weight storage capable of storing over 1,400 lbs of rubber Olympic plate

● “J” Hooks made of HDPE to protect bar knurling

● 2 Olympic Bar storage tubes● Twenty weight storage pegs● Pictured with OPT2 (Not included)


POWER SERIES POWER RACK SMITH PRESSD47SM: VARSITY POWER RACK w/ NON COUNTER WEIGHTED SMITH MACHINEFeatures● Fully enclosed Power Rack, 3’ x 3” 11 gauge

laser cut uprights● Solid built in spotter stands & ten weight

storage pegs● Dual position chin bar● Non counter weighted Smith Machine

attached to front of rack● Also available counter weighted (D47CSM)


A694: PRO OPEN RACKFeatures● 4” x 3” seven gauge steel uprights are


● Flip up spotter stands, adjustable safety bars, bar storage, and nickel plated weight storage capable of storing over 1,400 lbs of rubber Olympic plate


D694: VARSITY OPEN RACKFeatures● This open top Multi Rack is built of rugged

11 gauge 3” x 3” steel tubing uprights that are laser cut for easy movement of our heavy duty “J” Hooks and 34” long safety bars

● Sturdy built in spotter stands● Ten weight pegs capable of storing over

1,000 lbs of Olympic plate● The standard dual position chin bar

completes this versatile Multi Rack


MR690: MEGA HALF RACKFeatures● Uprights are made of 4” x 4” seven gauge


wall steel tubing● Built-in Spotter Stands fl ip up and

lock in position● Twelve Weight Storage Pegs (45 lb plates

store at waist height)● Olympic Bar Storage● Two sets of Chin Bars: One set 1 1/4”,

One set 2” FAT BAR, (both have neutral and pronated positions)

● Three lower Band Pegs with Magnums unique recessed patent pending design

● Upper Band Pegs● “J” Hooks made of HDPE to protect

bar knurling● Holds 1600 lbs of rubber Olympic plate


A690: PRO HALF RACKFeatures● 4” x 3” seven gauge steel uprights are


● Flip up spotter stands, adjustable safety bars, bar storage, and nickel plated weight storage capable of storing over 1,400 lbs of rubber Olympic plate


D690: VARSITY HALF RACKFeatures● This open top Multi Rack is built of rugged



1,000 lbs of Olympic plate● The standard dual position chin bar completes

this versatile Half Rack


A47: PRO POWER RACKFeatures● 4” x 3” seven gauge steel uprights are laser

cut for easy movement of our heavy duty “J” Hook system

● Featuring fl ip up spotter stands, adjustable safety bars, dual grip chin bar, Olympic bar storage, band storage, and nickel plated weight storage capable of storing over 1,400 lbs of rubber Olympic plate

● Pictured with optional A47P - Hardwood Insert Platform, OPT10 -

● Custom Logo, and OPT14 - Name Plate


D47: VARSITY POWER RACKFeatures● This open top Multi Rack is built of rugged



1,000 lbs of Olympic plate● The standard dual position chin bar completes

this versatile PowerRack


4 5

PO

WE

R F

ULL

PO

WE

R R

AC

KS

SE

RIE

SP

OW

ER

HA

LF R

AC

KS

SE

RIE

S

PO

WE

R D

OU

BLE

HA

LF R

AC

KS

SE

RIE

SP

OW

ER

OP

EN

PO

WE

R R

AC

KS

SE

RIE

S

2 3



Tel: +44 (0)2920 65 11 36

Tel: +44 (0)2920 65 11 36





OPT17B: JAMMIN ARMS w/BAND HOLDER ATTACHMENTFeaturesNow you have the option of band training with Jammin Arms. Bands can be used in conjunction with weights or by themselves to create a smooth, consistent resistance both positive and negative. The resistance of the bands can be varied according to how you hook the band to the three pegs.

HARDWOOD PLATFORM w/ INSERTModel FitsA47P A47 - Pro Power RackA694P A694 - Pro Open RackA690P A690 - Pro Half RackA691P A691 - Pro Double Rack (1 Side)D47P D47 - Varsity Power RackD694P D694 - Varsity Open RackD690P D690 - Varsity Half RackMR47P MR47 - Mega Power RackMR694P MR694 - Mega Open RackMR690P MR690 - Mega Half RackMR691P MR691 - Mega Double Rack

SOLID RUBBER PLATFORM w/ INSERTModel FitsRP4794 A47 - Pro Power Rack, A694 - Pro Open RackRP9091 A690 - Pro Half Rack, A691 - Pro Double Rack (1 Side)DRP4794 D47 - Varsity Power Rack, D694 - Varsity Open RackDRP9091 D690 - Varsity Half RackMRP4794 MR47 - Mega Power Rack, MR694- Mega Open RackMRP9091 MR690 - Mega Half Rack, MR691 - Mega Double Rack

HARDWOOD PLATFORMModel DimensionsPS86 96” W x 72” D x 2 1/4” HPS88 96” W x 96” D x 2 1/4” H

SOLID RUBBER PLATFORMModel DimensionsRP86 96” W x 72” D x 2 1/4” H

OPT1R: REVERSE“J” HOOKS (PAIR)Use WithOPT1R - A47, A694, MR47, MR694DOPT1R - D47, D694

OPT4 & 5: BAND PEGSUse WithOPT4 (3 pegs) - A47, A694,

MR47, MR694OPT5 (2 pegs) - A690, A691,

MR690, MR691DOPT4 (3 pegs) - D47, D694DOPT5 (2 pegs) - D690

OPT6: SQUAT HANDLES (PAIR)Use WithOPT6 - A47, A694, A690, A691,

MR47, MR694, MR690, MR691

DOPT6 - D47, D694, D690

OPT7 & 7R: STEP UP PLATFORMUse WithOPT7 - A47, A694, A690,

A691,MR47, MR694, MR690, MR691

OPT7R (For use on outside) - A47, A694, MR47, MR694

DOPT7 - D47, D694, D690DOPT7R (For use on outside) -

D47, D694

OPT10: CUSTOM LOGOUse WithAll platforms

OPT21: SAFETY ARM STORAGEUse WithOPT21 - A Series RacksOPT22 - MR Series RacksOPT23 - D Series Racks

OPT9: BUMPER PLATE STORAGE (PR)Use WithA691, MR691

OPT14 & 15: NAME PLATEUse WithOPT14 - A47, A694, A690, A691,

D47, D694, D690OPT15 - MR47, MR694,

MR690, MR691

OPT8 & 8R: TECHNIQUE SCOOPS (PR)Use WithOPT8 - A690, A691, MR690, MR691OPT8R (For use on outside) -

A47, A694, MR47, MR694DOPT8 - D690DOPT8R (For use on outside) -

D47, D694

OPT11: PLATFORM RAMPUse WithOPT11 - All A platformsMOPT11 - All MR platformsDOPT11 - All D platforms

OPT2 & 12: ROTATING CHIN HANDLESUse WithOPT2 - A690, A694, A691, MR690,

MR694, MR691OPT12 - A47, MR47DOPT2 - D690, D694DOPT12 - D47

OPT3 & 3R: DIP BARSUse WithOPT3 - A690, A691, MR690, MR691OPT3R - A47, A694, MR47, MR694DOPT3 - D690DOPT3R - D47, D694

OPT17: JAMMIN ARMSFeaturesThis versatile option can turn any Magnum Power Rack into an entire circuit of Plate Load equipment. Strengthen your players’ driving power. Jammin Arms can be mounted into 13 different heights to perform an unbelievable number of movements from a standing position or from a bench.

OPT13: LAND MINEFeatures● Used for rotational training

Use WithOPT13 - All A racksMOPT13 - All MR racksDOPT13 - All D racks

OPT16: CORE HANDLEFeatures● Handle attachment for Land Mine option

Use WithOPT13 - Land Mine AttachmentMOPT13 - Land Mine AttachmentDOPT13 - Land Mine Attachment

Power SeriesPower Rack Options

Power Series Platforms

6 7

PO

WE

R P

LATF

OR

MS

SE

RIE

SP

OW

ER

PO

WE

R R

AC

K A

TTA

CH

ME

NTS

SE

RIE

S

PO

WE

R P

OW

ER

RA

CK

OP

TIO

NS

SE

RIE

S

4 5Tel: +44 (0)2920 65 11 36exclusive uk distributor

A695: PRO FLAT TO INCLINE BENCH w/HORIZONTAL ADJUSTMENTFeatures● Has multiple settings and

locks into Varsity, Pro, and Mega Power Racks

● Seat automatically is set at the proper angle as back rest is adjusted

● Horizontal adjustment lever allows user to adjust length of bench while seated


A301: HORIZONTAL PLATE RACK w/ WHEELSFeatures● Holds: (4) 45 lb Bumper Plates,

(2) 25 lb Bumper Plates, (2) 10 lb Bumper Plates, (4) 10 lb rubber coated Olympic Plates, (4) 5 lb rubber coated Olympic Plates, and (4) 2.5 lb rubber coated Olympic Plates

● Includes (1) horn to hold collars and handle for moving


A303: ACCESSORY STORAGE RACKFeatures● Store resistance chains

and bands● Store options for your

Power Racks such as dip bars, technique scoops, step-up platforms, Jammin Arms, etc


D58: VARSITY CALF PLATFORMFeatures● Stretches calves● Available in ridge black


404: FOUR WAY NECKFeatures● Counter weighted lifting arm for

light starting weight● Counter weighted pivoting head

pads hold position better● Adjustable height seat and four

handle posts● Two weight storage pegs


405: REVERSE BACK EXTENSIONFeatures● Adjustable starting point● Roller pad can be locked in

forward position to use unit without resistance

● Two hand position grips● Two weight storage pegs


A309: ADJUSTABLE STEP UP PLATFORMFeatures● Rubber Surface Platform

18” x 18”● Adjusts into eight positions with

spring pin lever● Handle and wheels for ease of

movement


A310: ADJUSTABLE STEP UP BOXFeatures● Rubber Surface Platform

16” x 25”● Adjusts into six positions

7” high to 22” high● Handle and wheels for ease

of movement


A311: PORTABLE SQUAT STAND SETFeatures● 3” x 3” Uprights attached to wide

stable base● Take offs adjust from 46” to 64”

in 2” increments● Base is built of 2” x 3” tubing with

wheels for easy positioning


A305: HI-BOY BUMPER RACKFeatures● Eight slots for bumper plate

storage at waist height● Two Olympic bar holders and

one storage peg for clamps● Magnum’s A304 - Bar Break

can also be stored at one end


A304: BAR BREAKFeatures● This unique tool lifts and holds

an Olympic bar off the fl oor for loading and unloading plates

● It has rubber wheels, back bumpers, and a rubber stop to protect platforms when loading or unloading a bar


D306: VARSITY HORIZONTAL BUMPER PLATE RACKFeatures● Holds eight 45 lb Bumper

Plates 15” off the fl oor


D66: BAR HOLDERFeatures● Vertically holds ten Olympic bars


D695: VARSITY FLAT TO INCLINE BENCH w/HORIZONTAL ADJUSTMENTFeatures● Locking rods for attachment to

Power Rack docking station● Spring pin adjustment for

horizontal length● Four positions - fl at, 30, 45

and 80 degrees● Handle and wheels for easy

movement

Specifi cationsSize 31” W x 53” D x 20”

A96: PRO GLUTE / HAM / REVERSE HYPERFeatures● Step through design● Leg rollers and over sized foot

plate can be adjusted on linear shafts and bearings while in exercise position

● Vertical adjustment for leg rollers is gas assisted

● Handles to perform reverse hypers

● Hooks to attach bands for reverse hypers


Power Series Benches Power Series Accessories

D96: VARSITY GLUTE / HAM / REVERSE HYPERFeatures● Handles for reverse hypers● Height of leg assembly is

adjustable● Crescent shaped thigh pads

for comfort● Lower roller pads are angled

for easy entry / exit● Handles provided for easy

entry / exit


D86: VARSITY FLAT / INCLINE / DECLINEBENCHFeatures● Back rest adjusts into 17 degree

decline, fl at, and six incline positions: 15, 30, 45, 60, 67, and 80 degrees

● Seat adjusts into three positions● Adjustable rollers hold user in

position while in decline


Features● Gun rack adjustment● Back rest adjusts into seven

positions marked in degrees: decline 15 degrees, 0, incline 15, 30, 60, and 80

● Seat adjusts into four positions

● Roller pads stabilize user● Wheels for ease of movement


A85: PRO FLAT TO INCLINEBENCH w/ WHEELSFeatures● Single spring pin adjustment● Seat automatically is set at the

proper angle as the back rest is adjusted

● Positions are marked in degrees: 0, 15, 30, 45, 60, 80

● Drop away handle and wheels provide easy movement


D85: VARSITY FLAT TO INCLINE BENCH w/ WHEELSFeatures● Dual spring pin adjustment● Back rest adjusts into six

positions marked in degrees: 0, 15, 30, 45, 60, and 80

● Seat adjusts into four positions.● There is less than a 2” gap

between seat and back pad● Handle and wheels provide

easy movement


D85A: VARSITY FLAT TOnINCLINE BENCH w/ WHEELSFeatures● Gun rack adjustment● Back adjusts into fi ve positions:

fl at, 30, 45, 60, and 80 degrees● Seat adjusts into two positions● Handle and wheels provide

easy movement


A86: PRO FLAT/INCLINE/DECLINE BENCH w/WHEELS

8 9

PO

WE

R B

EN

CH

ES

SE

RIE

S

PO

WE

R A

CC

ES

SO

RIE

SS

ER

IES

6 7

Tel: +44 (0)2920 65 11 36


WERK-SAN (IWF Accredited) Hitechplates

DC Blocks

Hitechplates are changing the future in lightweight standard sized plates. With HITECH Plates you can train from the fl oor with a light enough weight that allows you to focus on your technique without fear of damage resulting from dropping of weights.

Features● Rugged one piece construction ● Fits the bar snugly with no wobble● Slides on and off bar smoothly● No metal hub to damage the bar● Will not rust ● Environmentally friendly.● Made from recycled materials

Specifi cations:● Competition size and shape – 17.5” diameter & 2” centre hole● Available in 2.5kg / 3.7kg / 5kg / 10kg● Fits all Olympic and competition bars ● Sold only in pairs

Designed by US Olympic lifter Derek Crass, DC blocks are a light weight and highly cost effective alternative to other pulling blocks/plyo boxes currently on the market.

Features:● Extremely versatile – can be used as plyo boxes or pulling blocks● Made of recycled plastic ● Lightweight so easily moved between stations

Specifi cations:5cm high, 48cm wide and 40cm deepweighing only 5kg a piece

Werk-san Sport Ltd have manufactured weight training equipment since 1965. It was the 3rd company after Uesaka and Eleiko to be approved by the International Weightlifting Federation (IWF) for its bars and discs. It remains one of only 4 or 5 companies to have the IWF approval. It manufactures some 1500 sets per year and exports some 90% of these.

Werk-San Olympic BarsScandinavian steel specially developed for Werk-San ● 5 strategically located carbon-fi bre bearings● Synthetic gel lubricant for longevityAvailable as competition or training bars

Feature● Each sleeve Contains fi ve (5) Roller Bearings”.

Specifi cationIWF certifi ed men’s 20 kg or women’s 15 kg

PlatesFeaturesThe most durable synthetic bumper material available ● Ribbed inside plate diameters to

prohibit sliding on ribbed sleeves ● Individually tested for safety and

durability

Specifi cations:Competition Plates – IWF certifi ed plates, 25kg, 20kg, 15kg, 10kg kg, 2.5kg, 2kg, 1.5kg, 1kg and 0.5kg (5kg and below available in rubber and cast)

Lightweight 7 Foot Aluminium Olympic Technique Training Bar. Specifi cations● 25kg maximum capacity.● 7.5kg weight

COMPETITION & TRAINING SETS AVAILABLE

Competition set – with small rubber friction plates. IWF Certifi ed 190 or 185kg. Specifi cations● 1 x 20kg or 15kg WerkSan Barbell● 2 each of 25kg, 20kg, 15kg, 10kg,

and rubber coated 5, 2.5, 2, 1 & 0.5kg plates● 2x 2.5kg barbell collars.

Kilogram Training Set with small metal plates.IWF Certifi ed 187 or 182kg. Specifi cations:● 1x 20kg or 15kg Werksan Barbell● 2 each of 25, 20, 15, 10kg plates,

and metal 5, 2.5, 2, 1 & 0.5kg plates● 2x 2.5kg. barbell collars.

8 9

PO

WE

R O

LYM

PIC

BA

RS

& P

LATE

SS

ER

IES

PO

WE

R T

EC

HN

IQU

E E

QU

IPM

EN

TS

ER

IES


Tel: +44 (0)2920 65 11 36 email: [email protected]


All

info

rmat

ion

corr

ect a

t tim

e of

goi

ng to

prin

t – J

une

2011

Documents

Powerseriesbrochure