Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Panasonic System Networks Co., Ltd.
JS-960WS Installation Assistance Guide(Guide for how to wire cables)
Panasonic System Networks Co., Ltd.11/8/2013 2
1. This document indicates the attention point at the time of installation of POS JS-960WS,and the point is also need to attention in a maintenance.
2. Please read and refer the Operating Instruction when installing the JS-960WS series.
3. This guide is for person has the knowledge of installation, repair, and a maintenance. Moreover, the object of this document is for JS-960WS which staging work has completed.
Notes :
Panasonic System Networks Co., Ltd.
JS-960WS Cabling
Panasonic System Networks Co., Ltd.11/8/2013 4
Step 1. Remove Rear Cover
Lay down the JS-960WS as shown in a figure. Do not give a shock. Slide the lock levers of the rear cover in the bottom.
Lock lever of rear cover
Bottom View
Panasonic System Networks Co., Ltd.11/8/2013 5
Step 2. Remove Rear Cover
Stand JS-960WS. Do not give a shock.
(1) Slide upward a Rear Cover as shown in a figure and remove.
(1)
Rear View
Panasonic System Networks Co., Ltd.11/8/2013 6
Step 3. Remove Cable Cover
Push and hold the button on both sides on a Cable Cover with both hands and lift up the cover.
Rear View
Panasonic System Networks Co., Ltd.11/8/2013 7
Step 4. Release Cable Guide
(1) Slide the cable guide to the right(2) Slide up the cable guide
(1)
(2)
Cable guide
Panasonic System Networks Co., Ltd.11/8/2013 8
Step 5. Customer Display
Unplug the customer display and the power cables.
Customer Display
Panasonic System Networks Co., Ltd.11/8/2013 9
Step 6. Customer Display
Open the Customer Display as figure above.
Customer Display
Panasonic System Networks Co., Ltd.11/8/2013 10
Step 7. Order of Cabling
(1) Plug the cable of the customer display, then (2) Plug the cable to COM2
(1)
(2)
Panasonic System Networks Co., Ltd.11/8/2013 11
Step 8. Order of Cabling
(3) Plug the External Monitor Cable to DVI-I port for the 2nd Display Unit ( JS-960SD-010 )
(3)
Panasonic System Networks Co., Ltd.11/8/2013 12
Step 9. Order of Cabling
(4) Re-plug a Power Cable to DC IN
(4)
Panasonic System Networks Co., Ltd.11/8/2013 13
Step 10. Order of Cabling
(5) Plug a Parallel Cable to Parallel Port.
(5)
Panasonic System Networks Co., Ltd.11/8/2013 14
Step 11. Order of Cabling
(6) Plug a COM Cable for COM1 port(7) Plug a Cash Drawer 3 (for JS-170CD) cable to CD3 port.
If the Cash Drawer is not Panasonic JS-170CD, please plug to CD1/2 port.
(6)
(7)
Panasonic System Networks Co., Ltd.11/8/2013 15
Step 12. Order of Cabling
(8) Plug a LAN cable to LAN port. (9) Plug a COM3 cable to COM3 port. (COM3 is used for a external display)
(8) (9)
Panasonic System Networks Co., Ltd.11/8/2013 16
Step 13. Storing Cables
1) Store all cables inside of both hinges.
(1) Store cables in this line.
Panasonic System Networks Co., Ltd.11/8/2013 17
Step 14. Storing Cables
Push a core of the DVI cable as not interfere the cable-cover.
Panasonic System Networks Co., Ltd.11/8/2013 18
Step 15. Storing Cables
Store cables like a photograph.(Keep cables not overflow)
Right Side View Left Side View
Panasonic System Networks Co., Ltd.11/8/2013 19
Step 16. Store Cable Guide
Return to home position of the Cable Guide(1) Push down the cable guide (2) slide to the left until lock
(1)
(2)
Cable Guide
Panasonic System Networks Co., Ltd.11/8/2013 20
Step 17. Close Cable Cover
(1)Hold the cable cover with both hands, (2)Push in downward until it is locked.
(1)
(1)
(2)
Panasonic System Networks Co., Ltd.11/8/2013 21
Step 18. Check Closing of Cable Cover
Check if the cable cover is firmly mounted without any gap as shown in a figure.
Panasonic System Networks Co., Ltd.11/8/2013 22
Step 19. Organize Cables on Rear Side
(1) Store Cables to not cross each other as a picture above.(2) Close the Customer Display
(1)
(2) Customer Display
Panasonic System Networks Co., Ltd.11/8/2013 23
Step 20. Re-assemble Rear Cover
(1) Slide down a rear cover as shown in a figure
(1)
Panasonic System Networks Co., Ltd.11/8/2013 24
Step 21. Re-assemble Rear Cover
The lock lever of a rear cover
Lay down the JS-960WS as shown in a figure. Do not give a shock. Slide the lock levers of the rear cover in the bottom.
Panasonic System Networks Co., Ltd.11/8/2013 25
Step 22. Cabling of Bottom Side
Wire cables as shown in the figure above. Do not wire cross-over.
(2) Cabling out to Front Side(1) Cabling out to Rear SideRear Side
Front Side
Panasonic System Networks Co., Ltd.11/8/2013 26
Thank you
Hope this manual helps for your installation easier
Panasonic System Networks Co., Ltd.11/8/2013 27