Portable Power Station

User Manual

Main Power Button

USB 5V/2.4A Outputs x2

Type-C PD Output

LED Light Panel Switch

DC Input Port

Wireless Speaker

Wireless Speaker Working LED Indicator

Main Power LED Indicator

LED Light Panel

USB QC3.0 Output

Remaining Power Level LED Indicator

Wireless Speaker AUX-IN

Wireless Speaker Play/Pause Button

DC 12V Cigarette Lighter Socket

AC Power Outputs x2

AC Output Switch

AC Power Indicator

Re-charge your power station before use or storing for long periods of time via AC adapter, solar panel( max 150W), or car charger.

1. Long press the Power Button for 2 seconds until the green LED light comes on.

1. Long press the Power Button for 2 seconds to turn on the Power Station.

4. Switch OFF Please switch off when not in use to save the energy.

5. When the power inverter is not working as intended, the LED light will be red.

1. Turn on main power.

2. Plug your device into a USB output socket.

2. Long press the button for 2 seconds to turn on the speaker. You willhear a power up sound and see a blue LED light.

PS-Speaker

2. When in pairing mode, the blue light will be flashing. Search for “PS-Speaker” in your Bluetooth settings and pair it with your mobile phone.

- Long press for previous song

+ Long press for next song + Short click increase volume

- Short click to decrease volume

2. Open the cover.

1. Turn on main power.

3. Plug into car lighter port.

4. Output voltage: 9-12.6V

5. Output current: 10A(max)

2. Plug into DC output port.

3. DC output voltage: 9-12.6V

4. DC output current: 5A max per port

2. Long Press the far right button to turn on the LED light panel on half brightness mode.

4. Click again for SOS mode.

5. Click again for strobe mode.

6. In any mode, long press for 2 seconds to switch off the light panel. You can also just press one more time in strobe mode.

1. Do not cover the Power Station with anything that would prevent heat from escaping.

2. ThePower Station does not have an IP waterproof rating. Do not use in rain or in any other situations in which in can get wet.

3. Please keep away from fire and children.

1. It has four LEDs to display the remaining battery capacity. When being re-charged, the LED will flash based on the current battery level: Charging: ( :LED flash; : LED is off; : LED is on)

● Low Battery: When the battery is lower than 10%, the 1st LED will be blinking.● AC Power LED indicator: When it is green, AC output is on, when it is red, AC output is not working as intended.

100%-75% 75%-50% 50%-25% 25%-10% ≤10%

0%-25%26%-50%51%-75%76%-99%100%

2. When you want to check the remaining power level under standby or while working, short press the main power button to check as below：

4. Please do not disassemble the product.

5. Fully charge the Power Station before long time storage. Check the battery percentage every 3 months.

6. When not in use, make sure to turn off the Power Station to conservebattery power.

7. Please don’t leave the Power Station in situations where it can reach extreme temperatures exceeding 122°F such as inside a vehicle or out in direct sunlight.

DC 12V Outputs x3

3.

1. Get To Know Your Gear

3. Charging Your Station

2. Tech Specs

4. Powering On and Off

5. How to Use AC Output Port

6. USB Output

7. Bluetooth Speaker

9. DC 12V

8. Car Socket

10. LED Light Lanel

11. Power Indicator

12. Caution

1

2

3

4

5

6

1

2

3

4

5

6

7

8

9

10

11

12

13

7

8

9

10

11

12

13

A

A:

14

15

16

17

14

15

16

17

18

18

B

B:

Short press play/pause Long press 2s to turn on/off

3. Click the button again to be on max brightness mode.

462Wh (3.7V/124,800mAh)

Lithium-ion Cell

DC 19V/5A(Max) by Adapter

100-120V/60Hz

USB Outputs:5V/2.4A x2

USB QC3.0 x1(5V/3A,9V/2A)

Type-C PD x1(5V/3A,9V/3A,12V/3A,15V/3A,20V/3A) Max 60W

DC 9-12.6V Car Socket x1

DC 9-12.6V,Max 5A Output x3 (Total Share 10A Max)

AC Output Power: Rated Output Power: 300W per outletPeak Output Power: 500W(2 seconds)

Inverter Waveform: Pure Sine Wave

5W

Bluetooth3.0, 10W

Net Weight: 12lbs, 1oz

Dimension: 290x155x190mm/11.4x6.1x7.4in

Warranty: 12 months

Capacity:

Battery Type:

DC Input:

MPPT Solar Input:

AC Output:

DC Output:

LED Lighting

Wireless Speaker

14-32V by Solar Panel (Max 150W)

Please make sure the green light is on before using. The Power Station will stay oneven without any power draw. Make sure you turn it back off when not in use toprevent the battery from draining.

1. Turn on the main power.

1. Turn on main power.

1. Turn on main power.

2. Flip the switch between the 2 AC outlets to the ON position.

3. Plug your device into the AC outlet.

2. When not in use, long press the Power Button for 2 seconds until the green LED light turns off.

For additional support, please visitchargetech.com/support.