Upload
lediep
View
226
Download
2
Embed Size (px)
Citation preview
Polycom® Realpresence Mobile for frSIP® UC Platform
©2011 Deltapath Commerce And Technology Limited Page 1 of 7
Polycom® Realpresence Mobile for frSIP® Unified Communication Platform
Ver. 2.9.2 or Above
Polycom® Realpresence Mobile for frSIP® UC Platform
©2011 Deltapath Commerce And Technology Limited Page 2 of 7
Introduction The purpose of this document is to describe the configuration steps involved in frSIP® and Polycom® Realpresence Mobile, a soft client that supports video and high definition voice on iPad2, Samsung Galaxy Tablet, and Motorola XOOM. Video call between Polycom VVX1500, Polycom Telepresence m100, Polycom HDX, Polycom RMX, and Polycom Realpresence Mobile are tested to work under frSIP® UC 2.9.2 or above.
Configuration on frSIP Like any other soft client, you will need to create a User or a User with Extra Phone Set.
The example below assumes you are creating an Extra Phone Set, however, the parameters are the same for a standard user.
Polycom® Realpresence Mobile for frSIP® UC Platform
©2011 Deltapath Commerce And Technology Limited Page 3 of 7
Ensure you select Own CPE / Polycom Telepresence m500 in the Equipment Type. This will automatically configure the SIP settings to support H.264 video and all HD voice codecs.
Device Location: If your users are registering from the WAN to your UC switch’s WAN IP, you will need to select Outside Network. If your users are connected over VPN or LAN to the UC switch’s internal IP, then select Inside Network
After pressing SUBMIT, you will receive a CPE Username (in above example 1000-A) and a CPE Password. Note that down.
Installing Polycom® Realpresence Mobile
1. Go to App Store or Android Market
Download and install “Polycom Realpresence Mobile”
Polycom® Realpresence Mobile for frSIP® UC Platform
©2011 Deltapath Commerce And Technology Limited Page 4 of 7
Configuring Polycom® Realpresence Mobile
1. Click CANCEL when prompted to sign in to CMA 2. Click on the SETTINGS button on the bottom right hand corner. 3. Click on SIP Settings
Polycom® Realpresence Mobile for frSIP® UC Platform
©2011 Deltapath Commerce And Technology Limited Page 5 of 7
4. Fill in the SIP Settings per the table below
Polycom® Realpresence Mobile for frSIP® UC Platform
©2011 Deltapath Commerce And Technology Limited Page 6 of 7
Parameter Value
Enable SIP Calls ON
SIP Registration ON
SIP Proxy Server This is your frSIP server IP
SIP Registrar Server This is your frSIP server IP
Domain frsip
SIP User Name This is your SIP CPE Account ID e.g. 1000-A
Authorization Name This is your SIP CPE Account ID e.g. 1000-A
SIP Password Password This is your SIP CPE Account password, usually in the form of randomly generated alphanumeric characters with capital and lower case.
Protocol UDP
5. Press SETTINGS then DONE. 6. Your settings are now saved.