PLYCO Series 27 DoorSERIES 27 INSULATEDWIND RATED AND SECURITYDOOR SYSTEMS

Easy to Install

Pre-Hung or KD

Adjustable Steel Frame

“Wall Strength” Design

Energy Saving

Florida System Available

SER

IES

27CO

MM

ERCI

AL D

OO

R

SIZES 2/8 x 6/8, 3/0 x 6/8, 3/0 x 7/0, 3/6 x 7/0 OVERALL DIMENSIONS 3068 : 36” X 80” - Recommended rough opening 37” x 80 1/2” MULLION / ASTRAGAL N/AHINGES (3) 4” X 4” commercial quality dull chrome steel NRP non-template THRESHOLD Aluminum, handicapped approved - dedicated inswing and outswing. DOOR PANELTHICKNESS 1 3/4” SKIN Smooth 24 ga. galvanized steel EDGES Rolled edge - steel wrapped on all four edges and interlocked BLOCKING Composite lock reinforcing structure, heavy duty aluminum closure blocking (patented) INSULATION Solid urethane core R-VALUE Panel R-13 (u=.077) EMBOSSING Flush non-embossed or 6-panel embossed COLORS Standard: Prime White finish paint - coil applied and thermal set LOCK FACE PREP Standard with 2 1/8” lockset bore, backset of 2 3/4” - mortise prep optional - required for wind zonesDEAD BOLT Blocking is standard, edge bore is standard, face bore is optional SWEEP Durable, 6 fin sweepLITE KITS Impact glass available JAMB TYPE KD or PREHUNG MATERIAL 18 ga. galvanized steel FEATURES Adjustable wall fitFRAME DEPTHS 4 1/2”>5 1/2”, 5 1/2”>6 1/2”, 6 1/2”>7 1/2”, 7 1/2”>8 1/2”, 8 1/2”>9 1/2”, 9 1/2”>10 1/2” FLASHING N/A - Builder flashing as specified by installer. HINGE REINFORCEMENTS Standard 14 gauge steel TESTING Test Standard Test Method Result Pass Air Infiltration Performance ANSI/ISDSI - 101 ASTM-E283 .04 CFM/ft Yes The Series 27 door panel Acoustical Performance ANSI/ISDSI - 103 ASTM-E90,E413 STC Rating = 23 Yes has been tested and certified Water Penetration ANSI/ISDSI - 104 ASTM-E331 No entry Yes as shown. Physical Endurance (slam & twist) ANSI/ISDSI - 105 ASTM A250.4 No fatigue Yes Thermal Performance (core of the door) R-13.0 (u = .077) N/A Fenestration Performance UOF NFRC 100 UOF = 0.20 Fire Resistance N/A Security Performance ASTM F476 Grade 40 Yes

This product has been excluded and is in compliance with 2007 FBC excluding the HVHZ.

The following wind tests apply to doors up to 3670

Wind-Storm Resistance Florida #FL-10858 Florida / Dade County TAS-202 +60 PSF / -60 PSF Yes Impact - Large Missile Florida / Dade County TAS-201 No pentration / locked Yes Fatigue Loading Florida / Dade County TAS-203 No fatigue Yes Meets missile level “D” and includes wind zone 4 as defined in ASTM-E1966.

www.plyco.com 800/558-5895 FAX: 800/257-5926INTERNATIONAL 920/876-3611 FAX: 920/876-3527

WINDOWS • WALK DOORS • WALL VENTS • RIDGE VENTSSLIDING DOOR TRACK • SLIDE DOOR RAILS • PLY-FOIL INSULATIONHORSE STALLS • FASTENERS & CLOSURES • SPECIALTY PRODUCTS

Because of its ongoing commit-ment to product improvement, Plyco Corporation reserves the right to change, without notice, product specifications, avail-ability, prices and conditions of sale.

PLYCO Series 27Commercial Door The Plyco 27 Series pre-assembled door systems are carefully designed and engineered. Featuring:

nPrehung Door Systems and factory installed hardware saves time and money

nAll steel edge construction for strength and durability

n24 gauge galvanized steel for excellent rust prevention

nSolid polyurethane foam core with an R-value of 13.0

nA wrap around jamb that gives a “Wall Strength” Design

Trim Flex Hurricane Resistant Testing:nThe “Florida System” meets the HVHZ (High Veloc-

ity Huricane Zone) standards set by the Florida Building Code. It has also been approved for Wind-borne Debris under the Miami-Dade TAS 201, 202 and 203 protocols. This spec applies only to the 2868 & 3068 doors.

nTest Standards - ASTM 1886, ASTM 1996

PLYCO CORPORATIONUSA

800/558-5895FAX: 800/257-5926

INTERNATIONAL920/876-3611

FAX: 920/876-3527www.plyco.com

Trim Flex Frame with Kerfed Weatherstripping Trim Flex is an adjustable throat steel door frame designed for pre-hanging applications. It’s designed for residential, new or remodeling construction, and for light commercial applications.

n4 1/2” to 10 1/2” wall sizes (1” adjustment)

n5/8” stop height

nGalvanized (A-40) steel per ASTM-653

nPrepped with anchoring holes with vision slot for wood casing

nBase Kit - 18 gauge

nTrim Kit - 22 gauge for 4 1/2” to 5 1/2” and 5 1/2” to 6 1/2 “ wall sizes - 18 gauge for 6 1/2” to 10 1/2” wall sizes

nAll frames are white in color

n6’8” AND 7’0” handicap frames

nAvailable in six wall sizes 4 1/2” to 5 1/2”, 5 1/2” to 6 1/2” 6 1/2” to 7 1/2”, 7 1/2” to 8 1/2” 8 1/2” to 9 1/2”, 9 1/2” to 10 1/2”

nHandicap frames include a 1/2” x 5” handicap aluminum threshold

nIncludes Kerf style bronze foam weatherstripTrim Flex Steel Frame Features:

nTwo-piece construction for adjustability and easy installation

nFrames are available with a maximum 90-minute fire rating, both positive and neutral pressure - available up to 3’0” x 7’0”

nUL 10C and UL 10B code compliances

Heavy six-fin bottom, slide-on weather seals (replaceable )

PLYCO Series 27Commercial Door The Plyco 27 Series pre-assembled door systems are carefully designed and engineered. Featuring:

nPrehung Door Systems and factory installed hardware saves time and money

nAll steel edge construction for strength and durability

n24 gauge galvanized steel for excellent rust prevention

nSolid polyurethane foam core with an R-value of 13.0

nA wrap around jamb that gives a “Wall Strength” Design

Trim Flex Hurricane Resistant Testing:nThe “Florida System” meets the HVHZ (High Veloc-

ity Huricane Zone) standards set by the Florida Building Code. It has also been approved for Wind-borne Debris under the Miami-Dade TAS 201, 202 and 203 protocols. This spec applies only to the 2868 & 3068 doors.

nTest Standards - ASTM 1886, ASTM 1996

PLYCO CORPORATIONUSA

800/558-5895FAX: 800/257-5926

INTERNATIONAL920/876-3611

FAX: 920/876-3527www.plyco.com

Trim Flex Frame with Kerfed Weatherstripping Trim Flex is an adjustable throat steel door frame designed for pre-hanging applications. It’s designed for residential, new or remodeling construction, and for light commercial applications.

n4 1/2” to 10 1/2” wall sizes (1” adjustment)

n5/8” stop height

nGalvanized (A-40) steel per ASTM-653

nPrepped with anchoring holes with vision slot for wood casing

nBase Kit - 18 gauge

nTrim Kit - 22 gauge for 4 1/2” to 5 1/2” and 5 1/2” to 6 1/2 “ wall sizes - 18 gauge for 6 1/2” to 10 1/2” wall sizes

nAll frames are white in color

n6’8” AND 7’0” handicap frames

nAvailable in six wall sizes 4 1/2” to 5 1/2”, 5 1/2” to 6 1/2” 6 1/2” to 7 1/2”, 7 1/2” to 8 1/2” 8 1/2” to 9 1/2”, 9 1/2” to 10 1/2”

nHandicap frames include a 1/2” x 5” handicap aluminum threshold

nIncludes Kerf style bronze foam weatherstripTrim Flex Steel Frame Features:

nTwo-piece construction for adjustability and easy installation

nFrames are available with a maximum 90-minute fire rating, both positive and neutral pressure - available up to 3’0” x 7’0”

nUL 10C and UL 10B code compliances

Heavy six-fin bottom, slide-on weather seals (replaceable )

PLYCO Series 27 DoorSERIES 27 INSULATEDWIND RATED AND SECURITYDOOR SYSTEMS

Easy to Install

Pre-Hung or KD

Adjustable Steel Frame

“Wall Strength” Design

Energy Saving

Florida System Available

SER

IES

27CO

MM

ERCI

AL D

OO

R

SIZES 2/8 x 6/8, 3/0 x 6/8, 3/0 x 7/0, 3/6 x 7/0 OVERALL DIMENSIONS 3068 : 36” X 80” - Recommended rough opening 37” x 80 1/2” MULLION / ASTRAGAL N/AHINGES (3) 4” X 4” commercial quality dull chrome steel NRP non-template THRESHOLD Aluminum, handicapped approved - dedicated inswing and outswing. DOOR PANELTHICKNESS 1 3/4” SKIN Smooth 24 ga. galvanized steel EDGES Rolled edge - steel wrapped on all four edges and interlocked BLOCKING Composite lock reinforcing structure, heavy duty aluminum closure blocking (patented) INSULATION Solid urethane core R-VALUE Panel R-13 (u=.077) EMBOSSING Flush non-embossed or 6-panel embossed COLORS Standard: Prime White finish paint - coil applied and thermal set LOCK FACE PREP Standard with 2 1/8” lockset bore, backset of 2 3/4” - mortise prep optional - required for wind zonesDEAD BOLT Blocking is standard, edge bore is standard, face bore is optional SWEEP Durable, 6 fin sweepLITE KITS Impact glass available JAMB TYPE KD or PREHUNG MATERIAL 18 ga. galvanized steel FEATURES Adjustable wall fitFRAME DEPTHS 4 1/2”>5 1/2”, 5 1/2”>6 1/2”, 6 1/2”>7 1/2”, 7 1/2”>8 1/2”, 8 1/2”>9 1/2”, 9 1/2”>10 1/2” FLASHING N/A - Builder flashing as specified by installer. HINGE REINFORCEMENTS Standard 14 gauge steel TESTING Test Standard Test Method Result Pass Air Infiltration Performance ANSI/ISDSI - 101 ASTM-E283 .04 CFM/ft Yes The Series 27 door panel Acoustical Performance ANSI/ISDSI - 103 ASTM-E90,E413 STC Rating = 23 Yes has been tested and certified Water Penetration ANSI/ISDSI - 104 ASTM-E331 No entry Yes as shown. Physical Endurance (slam & twist) ANSI/ISDSI - 105 ASTM A250.4 No fatigue Yes Thermal Performance (core of the door) R-13.0 (u = .077) N/A Fenestration Performance UOF NFRC 100 UOF = 0.20 Fire Resistance N/A Security Performance ASTM F476 Grade 40 Yes

This product has been excluded and is in compliance with 2007 FBC excluding the HVHZ.

The following wind tests apply to doors up to 3670

Wind-Storm Resistance Florida #FL-10858 Florida / Dade County TAS-202 +60 PSF / -60 PSF Yes Impact - Large Missile Florida / Dade County TAS-201 No pentration / locked Yes Fatigue Loading Florida / Dade County TAS-203 No fatigue Yes Meets missile level “D” and includes wind zone 4 as defined in ASTM-E1966.

www.plyco.com 800/558-5895 FAX: 800/257-5926INTERNATIONAL 920/876-3611 FAX: 920/876-3527

WINDOWS • WALK DOORS • WALL VENTS • RIDGE VENTSSLIDING DOOR TRACK • SLIDE DOOR RAILS • PLY-FOIL INSULATIONHORSE STALLS • FASTENERS & CLOSURES • SPECIALTY PRODUCTS

Because of its ongoing commit-ment to product improvement, Plyco Corporation reserves the right to change, without notice, product specifications, avail-ability, prices and conditions of sale.