PLYCO Series 22 Door

Easy Installation

20 Gauge Door Panels

13/4 Thick Doors

16 Gauge Steel Frame

“B” Label Fire Door

SIZES 4 3/4”, 5 3/4” & 8 1/8” - 3068, 3070, 3670, 4068, 4070, 6068, 6070, 8068, 8070

OVERALL DIMENSIONS 3070 40” x 86” (recommended rough opening 40 1/4” x 86 1/4”)

4070 52” x 86” (recommended rough opening 52 1/4” x 86 1/4”)

MULLION/ASTRAGAL Double Doors have astragal attached to inactive panel

HINGES (3) 4.5 x 4.5 x .134” High-quality stainless steel ball bearing (NRP) hinges

THRESHOLD Aluminum: ADA approved

LAB TEST

Air infiltration ANSI/ISDI - ASTM E283

Acoustical Performance ANSI/ISDI - ASTM E90, E413

Water Penetraion ANSI/ISDI - ASTM E331

Physical Endurance ANSI/ISDI - ASTM A151-1

Thermal Performance R-5 (u=0.20)

Fire ResistanceLabeled Doors WHI B-Label

Security Performance ASTM F47 Grade 40

www.plyco.com 800/558-5895 FAX: 800/257-5926INTERNATIONAL 920/876-3611 FAX: 920/876-3527

WINDOWS • WALK DOORS • WALL VENTS • RIDGE VENTSSLIDING DOOR TRACK • SLIDE DOOR RAILS • PLY-FOIL INSULATIONHORSE STALLS • FASTENERS & CLOSURES • SPECIALTY PRODUCTS

Because of its ongoing commit-ment to product improvement, Plyco Corporation reserves the right to change, without notice, product specifications, avail-ability, prices and conditions of sale.

Series 22Walk Door System

Ser

ies

22

System is availablefacotorypre-assembledor KD

Designed for Commercial & Metal Buildings

DOOR PANELTHICKNESS 1 3/4”

SKIN Smooth 20 GA. A40 galvanealed steel (4068 & 4070 is 18 GA. A40 Galv. Steel)

EDGES Rolled edge - continuous laser welded seam

BLOCKING 14 GA. Steel lock reinforcement, 12 GA. Steel closer reinforcement

INSULATION Super Core 1# Density odorless rigid polystyrene foam

R-VALUE R = 5.0 (u = 0.20)

EMBOSSING N/A

COLORS White Primed finish

LOCK FACE PREP STD with lockset bore at 2 1/8” bore and backset of 2 3/4”

DEAD BOLT Blocking and edge prep are optional

SWEEP Aluminum/vinyl surface mounted strip

LITE KITS 5 x 20” wired / tempered and 10 x 10 wired / tempered Lites 20 x 30 tempered clear or tempered insulated

HINGE BACKERS 12 GA. Steel

JAMBTYPE Pre-Hung

MATERIAL Heavy 16 GA. Hot dipped Steel

FEATURES Adjustable in standard 5 3/4” and 8 1/8” jamb width

**All hardware factory installed to provide a “B” Fire Label

FLASHING N/A

HINGE REINFORCEMENTS 10 gauge steel

THERMAL BREAK N/A

111-12-1

PLYCO Series 22 Door

• (3) 41/2” X 41/2” X .134 mortised hinge preps

• ANSI A115.2 bored lock prep cylinder lock (Lock not included)

• Fully reversible - Hinge locations are symmetrical

• Closer reinforcement standard

• Pre-painted white prime finish

• 10 gauge hinge reinforcement

• 12 gauge closer reinforcement

• 14 gauge hardware reinforcement

• A40 galvanealed steel, 2” face head with welded metal building corner brackets

• Optional metal building trim head with 6” leg

• ANSI A115.1 47/8” high ASA strike preparation

• ANSI A156.1 41/2” x .134” hinge preparation

• “B” Label Fire Rating

INCLUDES:

Smoke and fire seal

Pre-painted white primed finish

Ball bearing hinges, 41/2” x 41/2” 304 SS

Four #14 x 1” self drilling screwsto connect upper corners

Hardware kit contains:Consists of threshold, notched or stops. Aluminum weather strip with rubber fin anddoor sweep. All mounting screws included,shipped loose.

PLYCO CORPORATIONUSA

800/558-5895FAX: 800/257-5926

INTERNATIONAL920/876-3611

FAX: 920/876-3527www.plyco.com

OPTIONS:

Header 6” face for metal panel installation

Installed grade 1 or grade 2 leverset

Installed closer, arm shipped loose

Header 4” for masonry opening

Wire glass option 10” x 10”, 5” x 20”

Loose or installed panic hardware

Outside trim for exit device lever

Snap-in closer reinforcement

PLYCO Series 22 Door

• (3) 41/2” X 41/2” X .134 mortised hinge preps

• ANSI A115.2 bored lock prep cylinder lock (Lock not included)

• Fully reversible - Hinge locations are symmetrical

• Closer reinforcement standard

• Pre-painted white prime finish

• 10 gauge hinge reinforcement

• 12 gauge closer reinforcement

• 14 gauge hardware reinforcement

• A40 galvanealed steel, 2” face head with welded metal building corner brackets

• Optional metal building trim head with 6” leg

• ANSI A115.1 47/8” high ASA strike preparation

• ANSI A156.1 41/2” x .134” hinge preparation

• “B” Label Fire Rating

INCLUDES:

Smoke and fire seal

Pre-painted white primed finish

Ball bearing hinges, 41/2” x 41/2” 304 SS

Four #14 x 1” self drilling screwsto connect upper corners

Hardware kit contains:Consists of threshold, notched or stops. Aluminum weather strip with rubber fin anddoor sweep. All mounting screws included,shipped loose.

PLYCO CORPORATIONUSA

800/558-5895FAX: 800/257-5926

INTERNATIONAL920/876-3611

FAX: 920/876-3527www.plyco.com

OPTIONS:

Header 6” face for metal panel installation

Installed grade 1 or grade 2 leverset

Installed closer, arm shipped loose

Header 4” for masonry opening

Wire glass option 10” x 10”, 5” x 20”

Loose or installed panic hardware

Outside trim for exit device lever

Snap-in closer reinforcement

PLYCO Series 22 Door

Easy Installation

20 Gauge Door Panels

13/4 Thick Doors

16 Gauge Steel Frame

“B” Label Fire Door

SIZES 4 3/4”, 5 3/4” & 8 1/8” - 3068, 3070, 3670, 4068, 4070, 6068, 6070, 8068, 8070

OVERALL DIMENSIONS 3070 40” x 86” (recommended rough opening 40 1/4” x 86 1/4”)

4070 52” x 86” (recommended rough opening 52 1/4” x 86 1/4”)

MULLION/ASTRAGAL Double Doors have astragal attached to inactive panel

HINGES (3) 4.5 x 4.5 x .134” High-quality stainless steel ball bearing (NRP) hinges

THRESHOLD Aluminum: ADA approved

LAB TEST

Air infiltration ANSI/ISDI - ASTM E283

Acoustical Performance ANSI/ISDI - ASTM E90, E413

Water Penetraion ANSI/ISDI - ASTM E331

Physical Endurance ANSI/ISDI - ASTM A151-1

Thermal Performance R-5 (u=0.20)

Fire ResistanceLabeled Doors WHI B-Label

Security Performance ASTM F47 Grade 40

www.plyco.com 800/558-5895 FAX: 800/257-5926INTERNATIONAL 920/876-3611 FAX: 920/876-3527

WINDOWS • WALK DOORS • WALL VENTS • RIDGE VENTSSLIDING DOOR TRACK • SLIDE DOOR RAILS • PLY-FOIL INSULATIONHORSE STALLS • FASTENERS & CLOSURES • SPECIALTY PRODUCTS

Because of its ongoing commit-ment to product improvement, Plyco Corporation reserves the right to change, without notice, product specifications, avail-ability, prices and conditions of sale.

Series 22Walk Door System

Ser

ies

22

System is availablefacotorypre-assembledor KD

Designed for Commercial & Metal Buildings

DOOR PANELTHICKNESS 1 3/4”

SKIN Smooth 20 GA. A40 galvanealed steel (4068 & 4070 is 18 GA. A40 Galv. Steel)

EDGES Rolled edge - continuous laser welded seam

BLOCKING 14 GA. Steel lock reinforcement, 12 GA. Steel closer reinforcement

INSULATION Super Core 1# Density odorless rigid polystyrene foam

R-VALUE R = 5.0 (u = 0.20)

EMBOSSING N/A

COLORS White Primed finish

LOCK FACE PREP STD with lockset bore at 2 1/8” bore and backset of 2 3/4”

DEAD BOLT Blocking and edge prep are optional

SWEEP Aluminum/vinyl surface mounted strip

LITE KITS 5 x 20” wired / tempered and 10 x 10 wired / tempered Lites 20 x 30 tempered clear or tempered insulated

HINGE BACKERS 12 GA. Steel

JAMBTYPE Pre-Hung

MATERIAL Heavy 16 GA. Hot dipped Steel

FEATURES Adjustable in standard 5 3/4” and 8 1/8” jamb width

**All hardware factory installed to provide a “B” Fire Label

FLASHING N/A

HINGE REINFORCEMENTS 10 gauge steel

THERMAL BREAK N/A

111-12-1