Plates

PT BAM supply Plates from West European,

Japanese, East European, Russian, Chinese and

other Asian sources to offer the most cost

effective project solution, with rapid delivery

Ex Stock and Ex-Mill to your designated

project port.

Our team have experience of supplying into a large variety of project applications including

Tank Farms, Bridge Fabrication, Boiler & Pressure Vessels, Hydro Power Penstocks, Offshore

Structures, High Rise and other Superstructure applications e.g. LNG Plants, Aluminium

Smelters, Refineries, Power Plants, etc...

With a huge variety of applications, we supply an equally large range of specifications to suit

your project requirement.

• Structural & High Strength

• Boiler & Pressure Vessel

• Offshore & Shipbuilding

• Abrasive Resistant and Quenched & Tempered

Examples are categorised below, although other specifications are available upon request.

Structural & High Strength Plates

We can supply plates for a variety of structural applications from as rolled plate for storage

tanks through to TMCP or Q&T plate for high strength applications such as crane booms.

EXAMPLE SPECIFICATIONS

• ASTM A36

• ASTM A283-C

• EN 10025 S235JR+AR

• EN 10025 S275JR+AR

• EN 10025 S275J2+N

• EN 10025 S355JR+AR

• EN 10025 S355K2+N

• EN 10025 S460 Q/QL/QL1

• EN 10025 S500 Q/QL/QL1

• EN 10025 S550 Q/QL/QL1

• EN 10025 S620 Q/QL/QL1

• EN 10025 S690 Q/QL/QL1

• EN 10025 S890 Q/QL/QL1

• EN 10025 S960 Q/QL

• ASTM A517 - Grades B/F/G/H

Typical Size Range:

5mm to 200mm Thick (depending upon grade & plate dimensions)

1.5m to 4.5m Wide

3m to 20m Long

Boiler & Pressure Vessel Plate

We supply specialist plate including material in accordance with NACE MR0175. Typically

boiler plates are supplied in the normalised condition, and we can perform additional testing

as required. These include SPWHT, UT, Z tests etc.

EXAMPLE SPECIFICATIONS

• ASTM (S) A516 Grade 60/65

• ASTM (S) A516 Grade 70

• ASTM A285 Grade C

• ASTM A537 Class 1

• BS 1501-223-490B

• BS 1501-224-490B LT50

• BS 1501-225-490B LT50

• EN 10028 P355 NH / NL1 / NL2

• EN 10028 P460 NH / NL1 / NL2

• ASTM A387 Grades 5, 9, 11, 12 & 22

• EN10028 16Mo3

Typical Size Range:

6mm to 150mm Thick

1.5m to 4.5m Wide

3m to 20m Long

Offshore & Shipbuilding Plate

PT BAM understand the critical nature of the performance of these plates, and supply offshore

plates from quality and reliable producers around the world. We can supply plates in

Normalised, TMCP and Q&T conditions from stock and mill.

EXAMPLE SPECIFICATIONS

• BS 7191 355EM, 355EMZ

• BS 7191 450EM, 450EMZ

• BS 7191 355D

• BS 7191 275D

• BS EN 10025 S355 J2G3

• BS EN 10025 S355 J2G4

• BS EN 10025 S355 K2G3

• BS EN 10025 S355 K2G4

• BS EN 10225 S355 G7, G9, G10 & G11

• API 2H Grade 50

Shipping Classification: LRS / ABS / DNV / BV / GL / RINA

• AH 32

• DH 32

• EH 32

• AH 36

• DH 36

• EH 36

• AH 40

• DH 40

• EH 40

Typical Size Range:

6mm to 120mm Thick

1.5m to 4.0m Wide

3m to 12m Long (up to 18m on request)

Abrasive Resistant and Quenched & Tempered Plate

Abrasive resistant plates can be supplied in 400 and 500 Brignell hardness, typically in the

Quenched or Quenched & Tempered condition, and are used for a wide variety of wear

resistant applications. High strength Q&T plates are supplied for applications including Hydro

Power Penstocks, Offshore Fixed Structures, Crane Booms, etc.

EXAMPLE SPECIFICATIONS

• EN 10025 S460 Q/QL/QL1

• EN 10025 S500 Q/QL/QL1

• EN 10025 S550 Q/QL/QL1

• EN 10025 S620 Q/QL/QL1

• EN 10025 S690 Q/QL/QL1

• EN 10025 S890 Q/QL/QL1

• EN 10025 S960 Q/QL

• ASTM A517 - Grades B/F/G/H

• Abrasive Resistant: 400 Brinell

Typical Size Range:

6mm to 120mm Thick

1.5m to 4.5m Wide

3m to 15m Long

Sections

PT BAM supplies the full range of Sections to suit your requirements, with sizes/grades to suit.

Rapid delivery Ex Stock and Ex-Mill is possible to your specified project port.

Our team have experience of supplying into a large variety of project applications including

High Rise Buildings, Stadia, Airports, Bridges, Hotel and Shopping Complexes etc...

• Universal Beams in accordance with BS4

• Universal Columns in accordance with BS4

• Parallel Flange Channels in accordance with BS4

• Wide Flange Beams in accordance with ASTM

• H Beams in accordance with JIS

• European Wide Flange Beams in accordance with EN

• European Standard Beams in accordance with EN

• European I Beam with Parallel Flange in accordance with EN

• European Parallel Flange Channels in accordance with EN

• European Standard Channels in accordance with EN

• Equal Angles

• Unequal Angles

• Flat Bars

• Hot Finished Square Hollow Sections in accordance with EN 10210

• Hot Finished Rectangular Hollow Sections in accordance with EN 10210

• Hot Finished Circular Hollow Section in accordance with EN 10210

• Cold Formed Square Hollow Sections in accordance with EN 10219

• Cold Formed Rectangular Hollow Sections in accordance with EN 10219

• Cold Formed Circular Hollow Sections in accordance with EN 10219

The synergies between our project experience and product knowledge means that wherever

the project and whatever the requirements are we can provide a total package solution. We

can supply in BS4, JIS, ASTM and European sizes and in grades to suit.

Pipes & Accessories

PT BAM specialise in the managed supply of the full range of Pipes and Accessories to suit

your project requirements, with sizes/grades to suit.

• Line Pipes & Process Pipes

• Oil Country Tubular Goods (OCTG) Supply

• Seamless Tubing

• Drill Pipe & Production Pipe

• Conductor Pipes & Casings

Line Pipes & Process Pipes

Pipes and associated tubular steel products for Projects in the energy sector form part of our

core offering. These can be supplied either ex-mill for large scale projects such as pipelines

and/or ex-stock to complete Pipe Projects: Petrochemical Plants, Oil Refineries, Gas Plants,

Offshore Structures, Pipeline Projects packages comprising numerous items eg for the

construction of a refinery or a petro-chemical process plant. Such packages can include pipes,

fittings flanges, valves, stud bolts and gaskets. For the offshore sector we supply large diameter

tubulars, cones and other structural pipes.

Typical Process, Power Generation and LNG facilities

Typical Linepipe Projects: Onshore and Offshore Oil & Gas pipelines for sour and non-sour

applications, Water Pipelines, Aviation Fuel, Fire Fighting, Water Injection and Condensate

Flow Lines.

Types of Pipes Supplied: Seamless Pipes, High Frequency Induction Welded (HFI) Pipes,

Electric Resistance Welded (ERW) Pipes, Longitudinal Submerged Arc Welded (LSAW) Pipes,

Spiral Submerged Arc Welded (SSAW) Pipes, Clad Pipes, Induction Bends

Pipe Coatings: External Polyethylene, Fusion Bonded Epoxy, Concrete Weight Coating,

Internal Corrosion and Flow Linings.

Specification and Material Range:

• Seamless Pipes: Bare, Externally Varnished or with Corrosion Coating up to 36"

diameter according to ASTM, ASME, API, UNI, DIN, ANSI standards.

• Welded Pipes: HFI, ERW, LSAW, EFW, SFW, longitudinal or spiral weld seam up to

120" diameter according to above standards.

• Finned Tubes: From 3/8" to 3" for heaters, boilers, heat exchangers, air coolers and

other purposes. Fins can be provided in aluminium, carbon steel, copper and other

alloys.

• Tubes, U-Bent Tubes: For boilers, heat exchangers, condensers according to ASTM or

other international standards. Type of material supplied: carbon steel, alloy steel,

austenitic steel, ferritic-austenitic steel, duplex stainless steel, titanium, copper, copper

alloys, monel , inconel, hastelloy, incoloy.

Specifications and Standards: ASTM A106, A120, A178, A179, A200, A209, A210, A211, A213,

A249, A269, A312, A333, A335, A358, A403, A409, A511, A789, A790, B68, B280, B163, B167, B337,

B338, B407, B423.

Steel Grades: Gr.B, Gr.3, Gr.6, P1, P2, P5, P11, P22, Tp 304, Tp 304L, Tp 316, Tp 316L, Tp 321, UNS

S31803, UNS S31550, UNS S32750, UNS S32760, UNS S31254, UNS C70600, UNS C70500, UNS

N06600, UNS N08800, UNS N08825, UNS N08925, UNS C12200.

API SPEC. 5L Gr.B, X42, X52, X60, X65.

Dimensions acc. to ANSI B36.10, B36.19, API 5L.

Oil Country Tubular Goods (OCTG) Supply

PT BAM supply OCTG, oilfield casing, tubing, drill pipes, pup joints, drill collars, crossovers,

and associated tubular products and other OCTG accessories.

Seamless and ERW Casing

Specification : API 5CT

Grades : K55, J55, N80, L80, C95, P110, PS80

Special Grades : For sour services and for deep well with high collapse properties

Dimensions : OD From 4" - 26", WT From 0.2 - 0.5"

Length Range : 1, 2 or 3

Thread connections : API (STC and LTC), BTC, Extreme Line, various premium

connections, integral connections, integral metal seal

connections, threaded and coupled connections and integral

thread seal connections, etc.

Seamless Tubing

Seamless Tubing in various ranges, grades, threaded with API and Premium connections.

Specification : API 5CT

Grades : J55, N80, L80, 13Cr, P110, Q125, H40

Specialty Grades : Chrome and high performance grades

Length Range : 1, 2 or 3

Thread connections : API 5B - Last Edition or Premium, EUE, NUE, Special Seal,

Metal-to-Metal seal and various Premium Connections

Drill Pipe and Production Pipe

We supply API Drill Pipe of wide variety of sizes, designs, and metallurgy and manufactured

from high quality seamless pipes and connections with all API 5D and or as per required

specifications.

Specification : API 5D and other Specifications

Dimensions : OD 2 3/8" - 6 5/8"

Length : up to 15' (4.57M)

With friction-welded tool joints, according to API in grades E-75, X 95, G-105 and S-135

Conductor Pipes & Casings

We can supply Conductor Pipes and Casings with plain ends or with weld-on connectors.

Sizes : OD 20" - 42"

Grades : 5L B, X42, X46, X52

Strip Products

• Hot Rolled Coils

• Cold Rolled Coils

• Hot Dipped Galvanized

• Electrogalvanized

• Other Coated Products

Hot rolled Coils

Hot rolled is supplied for cold rolling and coating purposes. It can also be used for tubing and

forming applications. It is primarily sold into the construction, shipbuilding, energy and

yellow good sectors.

Typical Size Range:

1.20 - 25.00mm Thick

Up to 2.0m Wide

Forming grades

EN 10111

ASTM A1011

JISG 3131

GOST 1050

Structural grades

EN 10025

JISG 3106

ASTM A 283 / 284

Other grades of steel freely available.

Pressure Vessel Steel

EN 10028-2 / ASTM A285 / JISG 3115

Gas Cylinders

EN 10120

High Strength Low alloy

EN 10149 / ASTM A 656 / JISG 3134

Cold rolled Coils

Cold rolled coils are used for domestic or profiling applications. The material can also be

coated and is used in a variety of sectors including construction, automotive and light

engineering.

Typical Size Range:

0.20 - 3.50mm Thick

Up to 2.0m Wide

Grade:

EN 10130

ASTM 1008

JISG 3141

GOST 380

Hot dipped galvanized

Flat rolled steel hot dipped coated with a thin layer of zinc.

Typical Size Range:

0.20 - 3.50mm Thick

Up to 2.0m Wide

Forming Grades

EN 10327

ASTM A 653M

JISG 3302

Structural Grades

EN 10326

ASTM A 653 M

JISG 3302

Electrogalvanized

Flat rolled steel electrolytically coated with zinc.

EN 10152

ASTM A 879

JISG 3313

Other coated products

To be supplied to a variety of international grades and standards.

Aluzinc

Flat rolled steel that has been coated in an aluminium / zinc alloy.

Aluminized

Flat rolled steel that has been coated in aluminium, largely used in the automotive industry.

Prepainted Steels

Coated flat rolled steel product that has been further covered with paint for use in both the

domestic appliance and after forming in the construction industry.

Electrical Steels

Flat rolled steel that is used in the electrical components industry.

Tinplate

Cold rolled steel that has been coated with a thin layer of tin, which is used almost exclusively

in the food and beverage industry.

Piling

PT BAM specialise in the managed supply of the full range of Foundation Products to suit your

requirements, with sizes/grades to suit.

• Sheet Piles

• Bearing Piles

• Tubular Piles

We source from a large number of competitive sources and are able to supply both Ex stock

and Ex-Mill packages. The synergies between our project experience and product knowledge

means that wherever the project and whatever the requirements are we can provide a total

package solution.

Sheet Piles

We can supply Sheet Piles in the following steel grades; JIS A5528 SY 295 & SY 390; and, EN

10248 S270GP & S355GP.

We are also able to supply a range of Z Piles and Straight Web Piles.

Bearing Piles

PT BAM can supply Bearing Piles in the following steel grades; ASTM A572 Grade50, EN 10025

S275 JR & S355JR.

Other grades are also available.

Semis/Other Products

PT BAM also can supply semi-finished products, Raw Materials and Mining Products to steel

mills.

• Slabs

• Billets

• Blooms

• Wire Rod

• Reinforcing Bars & Mesh

Slabs

Slabs are typically used for re-rolling into HRC and plate.

Billets

Billets are used in the production of wire rod, rebar and merchant bar.

Blooms

Blooms are mainly used for the production of structural sections and other engineering grade

applications.

Wire Rod

Wire rods are supplied in coil form and are used in both the construction sectors and the

engineering arena. More basic grades are used for the former whilst higher carbon and

drawing grades are used for various engineering applications.

Typical Size Range:

5.50mm Thick and upwards

Reinforcing Bars & Mesh

Metpro can supply Reinforcing Bars and Mesh in the standard internationally recognised steel

specification, such as; ASTM, BS and DIN etc...

Figure 1

Example of rib pattern of grade 500A with four transverse rib series.

Figure 2

Example of rib pattern of grade 500B/C with four transverse rib series.

PT. BAM NIAGATAMA JAYA Ruko PMP Blok F/10

Jl. Nn, Curuq Sangereng, Kelapa Dua, Gading Serpong

Kab. Tangerang 15810, Banten

| : inquiry@ptbamnj.com | Skype/YM/Live/GTalk: abammf | : +62 898 777 000 8 |

mailto:inquiry@ptbamnj.com