www.dpitrading.co.za

www.incledon.co.za

PROUDLY IMPORTED BY

PLASTICA ALFA

Compression

Fittings

&

Pipe Saddles

For use

with

Polyethylene

Pipe

PRODUCT CATALOGUE

SANS 14236 & 1808-44

Technical Information

Assembly Instructions

PLASTICA ALFA

Compression Fittings

PN 16 for fittings from Ø 16 mm to Ø 63 mm SANS 14236 (ISO 14236)PN 10 for fittings from Ø 75 mm to Ø 110 mm SANS 14236 (ISO 14236)

Body: black polypropylene (PP)Nut: blue polypropylene (PP)O-ring: nitrile rubber 70 Shore (NBR)Cliching ring: acetal resin 9(POM)Reinforcing ring: stainless steel “AISI 430"

(Maximum working pressure at the temperature of 20ºC.)

Special pieces suitable for the conveyance of drinking water, wine,drinks and alimentary fluids according to the applicable regulations in Italy and other countries.

The BLACK LINE compression fittings are in conformity with the standard UNI 9561, uni 9562, uni en 712-713-715, uni iso 7/1 and ISO 14236, AND SANS 14236

SANS 14236 & 1808-44

1

Coupling

Reducing Coupling

PLASTICA ALFA

Male Adaptor

16x½”16x¾”20x½”20x¾”25x½”

25x¾”

32x¾”

32x1¼”

40x1¼”40x1½”

50x1½”

63x1½”

63x2½”

75x2½”75x2"

75x3"90x2"90x3"90x4"110x3"110x4"

Product Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

400600400601400602400603400604400605400606400607400608400605

Code

400630400635

400640400641400646400652400655400656400657400660400661400662400665400666

400670400671

400636

Code

Code

400100400101

400106400107400112

400113400114400121400122400123400127400128400129

400136400138

400148

400144400146

400154400156400158400162400165400168400177400180

* Also available in 50 x 32mm

* Also available in 50 x 1¼” 65 x 1¼

2

Female Adaptor

16x½”16x¾”20x½”20x¾”25x½”25x¾”

32x¾”

40x1¼”40x1½”

50x1¼”50x1½”

75x2½”

PLASTICA ALFA

End Cap

90º Elbow

Product Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

400000400001400006400007400012400013400014400021400022400027400028400029

400035400036400038400046400054400056400065400077400080

Code

Code

Code

401400401401401402401403401404401405401406401407401408401409

401000401001401002401003401004401005401006401007401008401009

** Reduced pressure PN 10

* Also available in 90 x 4"

3

90º Male Threaded Elbow

PLASTICA ALFA

16x½”16x¾”20x½”20x¾”

25x¾”

32x¾”

40x1¼”50x1½”

75x2½”

90º Female Threaded Elbow

Product Catalogue

* Dimensions all in mm

32x1¼”

32x¾”

25x¾”25x½”20x¾”20x½”16x½”

40x1¼”40x1½”50x1¼”50x1½”

63x1½”

63x2½”

75x2½”

SANS 14236 & 1808-44

401200401205401206401210401211401212401216401217401218401225401226401227401235401236401238401245401247401250401255401257401259401265401269401280

Code

Code

401030401031401035401036

401041401042401046401047

401055401056401066401077401085401087

401095401105401110

* Reduced pressure PN 10

* Also available in 25 x ½” 50 x 2" 63 x 1½”

*

4

45º Elbow

45º Male Threaded Elbow

45º Female Threaded Elbow

PLASTICA ALFAProduct Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

Code

Code

Code

400900400901

400800

400850400851

5

90º Tee

90º Reducing Tee

PLASTICA ALFA

16x½”16x¾”20x½”20x¾”25x½”25x¾”

32x¾”

40x1¼”40x1½”50x1½”

75x2½”

63x2½”

75x3"

90x4"

90º Male Threaded Tee

Product Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

401900401901401902401903401904401905401906401907401908401909

Code

402255402260402265402270402271

402275402280402285402290

Code

Code

402100

402105402106

402111402112

402116402117402135402136402137402146402148402157402156402165402167402169402175402180402185

402190

****

** Available on request

**

**

** Available on request

6

90º Female Threaded Tee

PLASTICA ALFA

Nut

Product Catalogue

* Dimensions all in mm

16x½”16x¾”20x½”20x¾”25x¾”

32x¾”

40x1½”50x1½”

63x2½”

75x2½”

40x1¼”

SANS 14236 & 1808-44

Code

Code

401929

401930

401931

401936

401937

401941

401942

401950

401951

401952

401961

401973

401985

401987

401989

401995

402010

402020

401975

**

** Available on request* Reduced pressure PN10

**

Also available25 x ½”50 x 1¼”90 x 4"

7

Thrust Ring

O’Ring

Clinching Ring

PLASTICA ALFAProduct Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

8

Technical Information

1. After locating the site, prepare theclamp saddle, the bolts and the o’ring

2. Position the saddle lower part on the pipe

3. After inserting the o’ring in its proper seat, position the saddle upper part and start screwing the bolts.

4. Screw the bolts with a key to make the saddle adhere to the pipe.

5. Drill the pipe perpendicularly. The threaded part is ready to be connected.

Assembly Instructions

Clamp Saddles

PLASTICA ALFA

10 BAR without reinforcing ring ø 20÷ ø 63 6 BAR without reinforcing ring ø 75 ÷ ø 31512.5 BAR with reinforcing ring : ø 20 ÷ ø 6310 BAR with reinforcing ring ø 75 ÷ ø 315(maximum working pressure at the temperature of 20ºC)

CLAMP SADDLEBody: black polypropyleneGaskets: nitrile rubber 70 Shore (NBR)Bolts: galvanized steelReinforcing ring: stainless steel “AISI 430"

POLYPROPYLENE 100ºC

Special qualified pieces to the conveyance of drinking water and alimentary fluids.

The Clamp saddles are in conformity with the standard UNI EN ISO 13460 e UNI EN 10226/1, ANSI/ASME B1.20.1For PE pipes in conformity with the standard UNI 7990, INI EN 12201 - 2 - UNI EN ISO 15494/ SANS 1808-44

SANS 14236 & 1808-44

9

Clamp Saddle for PE and PVC Pipes

25 x ½”25 x ¾”32 x ½”32 x ¾”32 x 1"40 x ½”40 x ¾”40 x 1"50 x ½”50 x ¾”50 x 1"50 x 1¼”63 x ½”63 x ¾”60 x 1"63 x 1¼”63 x 1½”75 x ½”75 x ¾”75 x 1"75 x 1¼”75 x 1½”75 x 2"90 x ½”90 x ¾”90 x 1"90 x 1¼”90 x 1½”90 x 2"110 x ½”110 x ¾”110 x 1"110 x 1¼”110 x 1½”110 x 2"110 x 2½”110 x 3"125 x ¾”125 x 1"125 x 1¼”125 x 1½”125 x 2"125 x 2½”140 x 1"140 x 1¼”140 x 1½”140 x 2"140 x 3"160 x ½”160 x ¾”160 x 1"160 x 1¼”160 x 1½”160 x 2"160 x 3"160 x 4"200 x ¾”200 x 1"200 x 1¼”200 x 1½”200 x 2"200 x 3"200 x 4"225 x ½”225 x ¾”225 x 1"225 x 1¼”225 x 1½”225 x 2"225 x 3"225 x 4"250 x 1"250 x 1¼”250 x 1½”250 x 2"250 x 3"250 x 4"315 x 1"315 x 1¼”315 x 1½”315 x 2"315 x 3"315 x 4"

without reinforcing ring

with reinforcing ring

PLASTICA ALFAProduct Catalogue

No.Bolts

Sizeof Bolts

O-RingSize

WeightMass

Grams

* Dimensions all in mm

A

B

SANS 14236 & 1808-44

Code

117598117716117600117601117602117717117605117606117174117175117176117192117179117180117181117620117619117400117182117183117622117621117193117177117184117185117623117625117624117188117186117187117190117189117191117718117603117401117402117403117404117405

117406117407

117719

117408117409117720

117195117410117411117194117616117721

117197117300117412117198117617117618

117722117723117724117725117726117727117199117728117413117196117729117730117731117732117733117734117735117736

117122116116117123124123130135140139248250260252250287297301305307301347339348340342365443450449458454475480480463449475475470475817814814877866865865865875887875908969

206520652030213520352073208021602160216027122164219722282220271227122712271327502765400540104020405040654125

117245117615

117268117269

117261

10

PLASTICA ALFASANS 14236 & 1808-44

www.incledon.co.za www.dpitrading.co.za

LEADING PROVIDER OF QUALITY FLUIDCONVEYANCE PRODUCTS AND SOLUTIONS