Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
SPECIFICATIONSMaterial: . . . . . . . . . . . . . . . . . . . . . . . . 16 gauge steelFinish: . . . . . . . . . . . . . . . . . . . . . . . . . . Heat curedpowdercoatGasket: . . . . . . . . . . . . . . . . . . . . . . . . . Neoprene EPDMWeight: . . . . . . . . . . . . . . . . . . . . . . . . . 2 poundsMaximum Operating Temperature: 140º F (60º C)Electrical:Voltage: . . . . . . . . . . . . . . . . . . . . . . . 115V/230VPower Consumption: . . . . . . . . . . 20 watts maxCurrent Draw: . . . . . . . . . . . . . . . . . 0.2 amp maxFrequency: . . . . . . . . . . . . . . . . . . . . 50/60 hertzInternal Fuse: . . . . . . . . . . . . . . . . . 5 ampField Electrical Connection: . . . . . Nema 5 receptacle
DIMENSIONS: See Figure 1
Ionization units should be powered when there is air flowin the system. The Plasma Air Model AFS-MF provides aconvenient method for powering Series 100 and 200 Ion-ization Units. The AFS-MF is equipped with a pressureswitch which closes at 0.05 inch WG. The unit can be usedon either positive or negative pressure ducts. The AFS-MF can be installed in metal duct utilizing the factorysupplied gaskets and pre-drilled flange. The unit isshipped complete with an electrical “jumper cord” and (4)4 mm mounting screws to mount the ionization unit to theAFS-MF frame. The frame is mounted to the duct withsheet metal screws.
ModeL AFS-MF
ModeL 100 Mounted In AFS-MF
PLASMA AIR InteRnAtIonAL 35 MeLRoSe PLAce, StAMFoRd, ct 06902 203-662-0800 ph 203-662-0808 fax www.plasma-air.com [email protected]
11 3/4”
DUCT CUT-OUTDIMENSION 10” X 7”
MOUNTING SCREWLOCATION (TYP. FOR 4)
POWER - IN RECEPTACLESHEET METAL SCREWLOCATION (TYP. FOR 8) FACTORY SUPPLIED GASKETS
DRAWING NOT TO SCALE
DIMENSIONS
PRESSURESWITCH
PLASTIC TUBE
9”
REFERENCEPRESSURE PORT
FIGURE 1
© 201
2 All rights rese
rved
PLASMA AIR-ModeL AFS-MF IonIzAtIon PRoduct SubMIttAL