Planmeca ProMax 3D sPlanmeca ProMax 3D

ENGL

ISH

2 3

Planmeca ProMax 3D s and Planmeca ProMax 3D units are designed to obtain complete information on patient anatomy in the minutest detail. These intelligent, multipurpose X-ray units provide digital panoramic, cephalometric, and 3D imaging as well as 3D photo. Thanks to unique, technologically advanced design, any Planmeca ProMax can be upgraded into a 3D CBVT (Cone Beam Volumetric Tomography) unit. As a result, one X-ray unit can meet virtually any need in maxillofacial imaging.

Full range diagnostics

Both Planmeca ProMax 3D s and Planmeca ProMax 3D X-ray units comply with a multitude of diagnostic requirements: those of endodontics, periodontics, orthodontics, implantology, dental and maxillofacial surgery, and TMJ analysis. The images can be taken anywhere within the maxillofacial region.

Genuine all-in-one unit

90

808080

Ø50

5050

Ø50

4 5

Planmeca ProMax 3D s

Implant planning Orthodontic case

TMJ study Large View image

Standard volumes (child mode)

Ø50 x 80 mm (Ø42 x 68 mm)

Ø50 x 50 mm (Ø42 x 42 mm)

Stitched volume 90 x 60 x 130 mm

Planmeca ProMax 3D s is ideal for imaging with a smaller Field of View. The imaging size is optimal for e.g. single implant and wisdom tooth cases, as well as for implant surgery and orthodontic and periodontal treatment. The basic volumes can also be stitched together to generate a larger view of patient anatomy, up to 90 mm in width.

80

140

80

Ø80

50

Ø80

50

Ø40

6 7

Planmeca ProMax 3D

With Planmeca ProMax 3D, study volume sizes can be selected to meet the diagnostic needs without excess radiation outside the area of interest. The Ø80 x 80 mm image size is optimum for most diagnostic applications that require whole dentition, mandible, and maxilla in the same study volume. The Ø80 x 50 mm volume can be used for single views of the mandible or maxilla, and the small 40 x 50 mm volume is intended for molar area studies or for planning 3rd molar extractions. The basic volumes can also be stitched together to generate a larger view of patient anatomy.

3D study in Planmeca Romexis 3D Explorer Implant case

Impacted canine Wisdom tooth extraction

Standard volumes (child mode)

Ø80 x 80 mm (Ø68 x 68 mm)

Ø80 x 50 mm (Ø68 x 42 mm)

Ø40 x 80 mm (Ø34 x 68 mm)

Ø40 x 50 mm (Ø34 x 42 mm)

Stitched volume 140 x 105 x 130 mm

8 9

Planmeca Romexis for accurate diagnosis Planmeca iRomexis

Implant planning made easy

Planmeca Romexis allows easy planning and verifi cation of implant placement using realistic implant models from several manufacturers. Soft tissue surface scan and crown design can be imported and superimposed with 3D X-ray data providing a perfect environment for implant planning. The virtual treatment plan can be materialised into a real implant guide that can be used to accomplish your treatment exactly as planned.

The dedicated TMJ module provides tools for easy and accurate diagnosis of the TMJ area. The size, location and alignment of the projections can be freely defi ned and separate views are provided for both TMJs for easy side by side comparison of anatomy.

Unprecented fl exibility

Planmeca Romexis is a comprehensive software solution for acquisition, viewing, and processing of 3D radiographs, 3D photos and intraoral surface scans. The powerful combination of these modalities provides the most accurate information of patient anatomy for different needs. Planmeca Romexis software offers specially designed tools for implantologists, endodontists, periodontists, maxillofacial surgeons and radiologists.

Sharing the results

Studies can be quickly converted into multi-page printouts or handed out on free Planmeca Romexis Viewer media. Cases can be seamlessly transferred to mobile devices or partner clinics that also use Planmeca Romexis. DICOM standard compliance guarantees that images can be processed with 3rd party software or shared via hospital PACS.

Convenient 3D diagnosis

The Planmeca Romexis 3D rendering view gives an immediate overview of the anatomy and serves as an excellent patient education tool. The images can be instantly viewed from different projections or converted into panoramic images and cross sectional slices. Measuring and annotation tools such as nerve canal tracing assist in safe and accurate planning of treatment.

Planmeca iRomexis is a mobile companion application for Planmeca Romexis imaging software designed for Apple iPhone and iPad devices. It allows viewing of 2D and 3D images, 3D renderings and Planmeca ProFace images. Images can be made available for mobile use with Planmeca Online, and downloaded on Wifi and 3G networks wherever you are. Experience a new level of freedom and cooperation with Planmeca iRomexis. The application is available free at iTunes App Store.

10 11

SmartPan

SmartPan, unique panoramic imaging

A unique SmartPan imaging system uses the same 3D sensor also for panoramic imaging. This eliminates need to change sensors. The SmartPan system automatically calculates 9 different panoramic curves in 2 mm shifts from the panoramic exposure data and one layer where the sharpness is automatically adjusted for all regions. The user can browse between the panoramic images and select the most suitable for diagnosis after the exposure.

Planmeca ProFace – a unique option for acquiring a 3D facial photo with radiograph in one scan

Planmeca ProFace is a unique option available for the whole Planmeca ProMax 3D family* for creating a 3D face scan. The option is designed to fulfi l the most diverse diagnostic needs of today’s maxillofacial and dental professionals. It acquires the patient’s facial 3D photo in a radiation-free process giving the medical or dental professional opportunity to plan operations and document follow-up images.

The upgraded unit generates both a 3D photo and a CBVT volume with one single scan. Alternatively, the 3D photo can be acquired separately in a completely radiation-free process: the lasers scan the facial geometry and the digital cameras capture the colour texture of the face.

Safer and faster facial surgeries

The 3D photo visualises soft tissue in relation to dentin and facial bones, providing an effective follow-up tool for maxillofacial operations. As both a CBVT image and a 3D photo are generated in a single scan, the patient position, facial expression, and muscle position remain unchanged, resulting in perfectly compatible images. Careful preoperative planning, where the medical professional can study the facial anatomy thoroughly using Planmeca Romexis software, facilitates a detailed operation and enhances the aesthetic results.

Planmeca ProFace

*Planmeca ProMax 3D s, Planmeca ProMax 3D, Planmeca ProMax 3D Mid, and Planmeca ProMax 3D Max

12 13

Functional technology

Simple, effortless patient positioning

Patient positioning is made incredibly easy.

• The intuitive graphical user interface offers preprogrammed target sites and exposure values for different image types and targets.

• Positioning laser and joystick are used for fi ne adjustment. A scout image can be used to verify correct positioning.

• Full view open patient positioning

• Side entry for easy access; wheelchairs easily accommodated

Pulsed X-ray – increased image quality, reduced patient dose

Pulsed X-ray reduces patient radiation dose considerably and forms stroboscopic X-ray effect which, together with the short rotation scan, virtually eliminates artefacts, contributing to outstanding image quality. The total scanning time is 18 seconds for one volume, but the actual exposure time is only 3 seconds at shortest.

Easy cephalometry

With Planmeca ProMax Cephalostat cephalometric imaging is easier and more accurate than ever before. By changing the place of the digital sensor the unit switches from panoramic to cephalometric imaging modality. The unit can also be equipped with two fi xed digital sensors.

The functionally designed, easy-to-use head support guarantees accurate patient positioning in all cephalometric projections. The carbon fi bre ear posts and nasal support are extremely durable, hygienic, and fully transparent to radiation.

Wide range of image sizes

The unique design allows an exceptional range of image sizes and formats with fi eld sizes of up to 30 x 27 cm (11.8 x 10.6 in.) making digital lateral radiographs of the whole skull very easy. With the soft tissue fi lter applied in the Planmeca Romexis imaging software the images can be viewed with or without the fi lter.

Advanced SCARA Technology

The Planmeca ProMax platform’s unique SCARA technology (Selectively Compliant Articulated Robot Arm) enables free image geometry formation. Planmeca’s patented, computer-controlled SCARA robotic arm can produce any movement pattern required, ensuring perfectly accurate and reliable image volume positioning and enabling image volume diameter adjustment.

14 15

Minimum set up:

Client workstation and database server

• Planmeca Romexis 3D Explorer

• Database server

• Planmeca Romexis Image Database

The client workstation and database server can also be in separate computers.

Technical specifi cationsPlanmeca ProMax 3D s/3D with 3D reconstruction server (included in delivery)

1298

–219

8 (5

1.1”

–86.

5”)

1532

–243

2 (6

0.3”

–95.

7”)

1250

(49

.2”)

756

(29.

8”)

698 (27.5”)150(5.9”)

1128 (44.4”) 850 (33.5”)

Ø820(32.3”)

Ethernet

Printer

Planmeca ProMax 3D s and Planmeca ProMax 3D in detailPlanmeca ProMax 3D s Planmeca ProMax 3D

X-ray beam Cone Cone

Anode voltage 54–90 kV 54–90 kV

Anode current 1–16 mA 1–16 mA

Focal spot 0.5 mm, fixed anode 0.5 mm, fixed anode

Image detector Flat panel Flat panel

Gray scale 15 bit 15 bit

Detector resolution 630 x 1024 pixels, pixel size 127 μm x 127 μm

1024 x 1024 pixels, pixel size 127 μm x 127 μm

Image acquisition Single 200 degree rotation Single 200 degree rotation

Total scan time 18 s, pulsed X-ray 18 s, pulsed X-ray

Reconstruction time 15–60 s 15–60 s

3D reconstruction server

Proprietary Feldkamp type back projection reconstruction algorithm

Improved Artefact Removal (IAR) for high contrast object compensation

Volume sizesPlanmeca ProMax 3D s

Planmeca ProMax 3D

Voxel size, isotropic

Standard volume (child mode)

Ø50 x 80 mm (Ø42 x 68 mm)

Ø50 x 50 mm (Ø42 x 42 mm)

Ø80 x 80 mm (Ø68 x 68 mm)

Ø80 x 50 mm (Ø68 x 42 mm)

Ø40 x 80 mm (Ø34 x 68 mm)

Ø40 x 50 mm (Ø34 x 42 mm)

100 μm, 200 μm, 400 μm

Stitched volume 90 x 60 x 130 mm 140 x 105 x 130 mm 200 μm, 400 μm

Physical space requirementsPlanmeca ProMax 3D/3D s Planmeca ProMax 3D/3D s

with cephalostat

Width 96 cm (38 in.) 194 cm (76 in.)

Depth 125 cm (49 in.) 125 cm (49 in.)

Height* 153–243 cm (60–96 in.) 153–243 cm (60–96 in.)

Weight 113 kg (lbs 248) 128 kg (lbs 282)

Minimum operational space requirementsPlanmeca ProMax 3D/3D s Planmeca ProMax 3D/3D s

with cephalostat

Width 150 cm (59 in.) 215 cm (85 in.)

Depth 163 cm (64 in.) 163 cm (64 in.)

Height* 243 cm (96 in.) 243 cm (96 in.)

*The maximum height of the unit can be adjusted for offi ces with limited ceiling space.

Planmeca Romexis imaging softwareSupported 2D X-ray modalities

Intraoral

Panoramic

Cephalometric

2D linear tomography

Supported 3D X-ray modalities

3D CBVT

3D photo

3D surface scan

Supported photo sources

Intraoral camera

Digital camera or scanner (import or TWAIN capture)

Operating systems Windows XP

Windows Vista

Windows 7

Windows 2003 Server

Windows 2008 Server

Mac OS X

For detailed information please see system requirements of Planmeca Romexiswww.planmeca.com

Image formats JPEG or TIFF (2D image)

DICOM (3D image)

TIFF, JPEG, PNG, BMP (import/export)

Image size 2D X-ray image: 7–9 MB

3D X-ray image: typically 250 MB

DICOM 3.0 support DICOM Import/Export

DICOM DIR Media Storage

DICOM Print SCU

DICOM Storage SCU

DICOM Worklist SCU

DICOM Query/Retrieve

DICOM Storage Commitment

DICOM MPPS

Interfaces TWAIN Client

PMBridge (patient information and images)

VDDS (patient information and images)

InfoCarrier (patient information)

Datagate (patient and user information)

Installation options Client–Server

Java Web Start deployment

Additional diagnostic workstations with different software configurations

• Planmeca Romexis 3D Explorer

• Planmeca Romexis 3D Cross Sections module

• Planmeca Romexis 3D TMJ module

• Planmeca Romexis 3D Implant Planning module

• Planmeca Romexis DICOM module

Example installation

Dimensions

1002812

0/10

11/en

Asentajankatu 6 | 00880 Helsinki | Finland | tel. +358 20 7795 500 | fax +358 20 7795 555 | sales@planmeca.com | www.planmeca.com

Images may contain optional items not included in standard delivery. Available confi gurations and features may have country or area specifi c variations.Some products displayed above may not be available in all countries or areas. Rights for changes reserved.

Planmeca Oy designs and manufactures a full line of high technology dental equipment, including dental care units, panoramic and intraoral X-ray units, and digital imaging products. Planmeca Oy, the parent company of the Finnish Planmeca Group,

is strongly committed to R&D, and is the largest privately held company in the field.

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 72 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 300 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 300 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects true /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MarksOffset 6 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PageMarksFile /RomanDefault /PreserveEditing false /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> > ]>> setdistillerparams> setpagedevice