MATERIAL CODES

4120 N.E. Columbia Blvd. • Portland Oregon USA 97211Phone: 503-287-8383 • Fax: 503-281-9677 • www.fnwvalve.com

Pipe Valves Flanges Weld Fittings Screwed and Socket FittingsA-335 P-1 A-217 WC-6 A-182 F-1 A-234 WP-1 A-182 F-1

A-335 P-12 A-217 WC-6 A-182 F-12 A-234 WP-12 A-182 F-12A-335 P-11 A-182 F11/A-217 WC-6 A-182 F-11 A-234 WP-11 A-182 F-11A-335 P-22 A-182 F-22/A-217 WC-9 A-182 F-22 A-234 WP-22 A-182 F-22A-335 P-5 A-182 F-5/A-217 WC-5 A-182 F-5 A-234 WP-5 A-182 F-5A-335 P-7 A-182 F-7/A-217 WC-12 A-182 F-7 A-234 WP-7 A-182 F-7A-335 P-9 A-182 F-9/A-217 WC-12 A-182 F-9 A-234 WP-9 A-182 F-9

A-268 T-410 A-182 F-6/A-351 CA-15 A-182 F-6 A-234 WP-410 A-182 F-6

Pipe Valves Flanges Weld Fittings Screwed and Socket Fittings

A-53A-105 A-105, A-181

A-234 WPBA-105, A-181

A-216 WCB Grade 2 Grade 2

A-106BA-105 A-105

A-234 WPBA-105 Grade 2

A-216 WCB A-181 Grade 2 A-181 Grade 2

Pipe Valves Flanges Weld Fittings Screwed and Socket FittingsA-333 Grade 6 A-350 LF-2/A-352 LCB A-350 LF-2 A-420 WPL-6 A-350 LF-2A-333 Grade 3 A-350 LF-3/A-352 LCS A-350 LF-3 A-420 WPL-3 A-350 LF-3

Pipe Valves Flanges Weld Fittings Screwed and Socket FittingsA-312 T304 A-182 F-304/A-351 CF8 A-182 F-304 A-403 WP-304 A-182 F-304A-312 304L A-182 F-304L/A-296 CF3 A-182 F-304L A-403 WP-304L A-182 F-304LA-312 T316 A-182 F-316/A-351 CF8M A-182 F-316 A-403 WP-316 A-182 F-316A-312 316L A-182 F-316L/A-296 CF3M A-182 F-316L A-403 WP-316L A-182 F-316LA-312 321 A-182 F-321/A-351 CF8C A-182 F-321 A-403 WP-321 A-182 F-321A-312 347 A-182 F/347/A-351 CF8CMO A-182 F-347 A-403 WP-347 A-182 F-347

CHROME-MOLY ALLOYS

CARBON STEELS

LOW-TEMPERATURE STEELS

STAINLESS STEELS

MatCodes 7/8/05 3:23 PM Page 1

DOC: FNWMTRLS05 Ver. 7/05

© 2005 - FNW. All rights reserved.

The FNW logo is a registered trademark of Ferguson Enterprises, Inc.

The contents of this publication are presented for information purposes only, and while effort has been made to insure their accuracy, they are not to be construed as warrantiesor guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, whichare available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.

304SS 347SS HASTELLOY A 3% NICKEL CAST IRON304 347CF8 CF8C HAST A 3NI

188S CF82B HA CIAL22 188SCB HAA NCI*D2 188CB A

33 (JB) D2CB8 � (LAD) 410SS HASTELLOY B NI RESIST CAST IRONS (ALOYCO) CR13D (CONTRO) 11 13 HAST B NR

F8 F6 HB NR2KA2S EXELLOY (CRANE) HAB CAUSUL*

304LSS CA 15 N7MCF3 FERRALIUM N12M SPECIAL

188S ELC CD4M N2D2L CD4MCU DC2 A-254-SMODF8L DURCOMET 100 B� (LADISH)

188 ELC 38 (JB) NiMO LOW TEMP STEELS316SS ALUMINUM CW12M

316 AL LCB (CAST CARBON)CF8M 44 (JB) HASTELLOY C LC1 (CAST 1/2 % MOLY)

188SMO ALUM LC2 (CAST 2 1/2 % NICKEL)188M MONEL 400 HAST C LC3 (CAST 3 1/2 % NICKEL)

188MO M35 HC LF1 (FORGED CARBON)L22XM M35W HAC LF2 (FORGED CARBON)

D4 DM CW7M LF3 (FORGED 3 1/2 NICKEL)CF7M M CW12M

8M� (LAD) MNL N3 CARBON STEEL 36 (JB) MONL DC36 (HMC) MLCB C� (LAD) WCB (CAST)

0 (ALOYCO) MON 73 (JB) A 105 (FORGED)C (CONTRO) ML NIMOCR 22 (JB)

KA2SMO EM DS317SS NICU HASTELLOY D CS

CG8M QQN-177 (LAD)316LSS COMPE (LAD) HAST D 1 1/4% CR 1/2% MOLY

316L K (TRIM) HDCF3M 71 (JB) HAD WC6 (CAST)

188SMO ELC Mo (HMC) F11 (FORGED)D4L NICKEL 200 TITANIUM

6L (HMC) NI 2 1/4% CR 1/2% MOLYL22XMELC DNI TI

ALLOY 20 CZ100 T� (LAD) WC9 (CAST)A20 J20 78 (JB) TI� (LAD) F22 (FORGED)CN7M FA20 CZ100SC20 L34 LNI DUCTILE IRON 5% CR 1/2% MOLY

D20DURIMET 20 INCONEL 600 DI C5 (CAST)

CN7MTB INC DCI F5 (FORGED)35 (JB) CY40 21 (JB) F5A (FORGED)

A2 (HMC) DIN20� (LAD) MALLEABLE IRON 9% CR 1% MOLY

STAINLESS 20F (ALOYCO) ZIRCONIUM MI C12 (CAST)DURIMET ZR MALL F9 (FORGED)CAR-20

MATERIAL MARKINGS

*The information contained herein is general in nature. Reference should be made to the manufactureing catalog for individual manufacturer markings.

MatCodes 7/8/05 3:23 PM Page 2

API & BRITISH STANDARD TRIM DESIGNATIONS

PI TRIM NO. SEAT FACE WEDGE FACE STEM BS DESIGNATION

1 13 Chrome 13 Chrome 13 Chrome CR13

2 304 304 A76 304 18-8 Ti

3 310 310 A276 3.10 25-20

4 Hard 410 Hard 410 410 410

5 (F6 HF, Full Stellite) Stellite 6 facing Stellite 6 facing A276 410 or 420 HF

5A Ni-Cr Ni-Cr 410 410

6 13 chrome against 30% min. nickel facing A276 410 or 420 CR and Cu-Ni

7 Hard 410 Hard 410 410 410

8 (F6 HFS, Half Stellite) 13 Chrome against Stellite 6 facing A276 410 or 420 CR+ HF

8A Ni-Cr 410 410 410

9 Monel Monel Monel Ni-Cu

10 316 316 A276 316 18-10-2

11 Monel against Stellite 6 facing Monel HF-Ni

12 (F316 HFS, Half Stellite) 316 against Stellite 6 facing A276 316

13 Alloy 20 Alloy 20 B473

14 Alloy 20 against Stellite 6 facing B473

15 Stellite 6 facing Stellite 6 facing A276 304

16 (F316HF, Full Stellite) Stellite 6 facing Stellite 6 facing A276 316

17 347 347 A276 347 18-8 Nb

18 Stellite Stellite Alloy 20 Alloy 20

EQUIVALENT MATERIAL GRADES

DESCRIPTION UNS GRADE FORGING CASTING BARSTOCK

Carbon Steel K30504 A105 A216 WCB A105

Low Temp Carbon K03011 A350 LF2 A352 LCB A350 LF2

High Yield Steel K03014 A694 F60 A694 F60

31/2 Nickel Steel K32025 A350 LF3 A352 LCC A350 LF3

5 Chrome, 1/2 Moly K41545 A182 F5 A217 C5 A182 F5

11/4Chrome; 1/2 Moly K11597 A182 F11 A21T WC6 A739 B11

21/4 Chrome, 1 Moly K21590 A182 F22 A217 WC9 A739 B22

9 Chrome, 1 Moly K90941 A182 F9 A217 WC6 A182 F9

13 Chrome S41000 A182 F6A A351 CA15 A276 or A479 410

304 S30400 A182 F304 A351 CF8 A276 or A479 304

304L S30403 A182F304L A351CF3 A276 or A479 304L

316 S31600 A182 F316 A351 CF8M A276 or A479 316

316L S31603 A182 F316L A351 CF3M A276 or A479 3161

3171 S31703 A182 F317L A351 CG8M A276 or A479 3171

321 S32100 A182 F321 A276 or A479 321

347 S34700 A182 F347 A351 CF8C A276 or M79 347

17-4PH S17400 A564 630 A564 630

Alloy 400 NO4400 8564 N04400 A494 M35-1 9164 N04400

Alloy 500 N05500 B865 N05500

Alloy 800 N08800 9564 N08810 8408 N08800

Alloy 825 N08825 8425 N08925

Alloy 600 N06600 8564 N06600 A494 CY40 B166 N06600

Alloy 625 N06625 B564 N06625 A494 CW 6MC B446 N06625

Alloy B2 N10665 B564 N10665 A494 N 12MV B335 N10665

Alloy C N10002 A494 CW6M

Alloy C22 N06022 B574 N06022 A494 CX2MW B574 N06022

Alloy C276 N10276 BS564 N10276 A494 CW12 MW B574 N10276

22% Duplex S31803 A182 F51 A890 Gr. 4A A276 or A479 S31803

25% Duplex S32750 or 32760 A182 F53 A890 Gr. 6A A276/479 S32750 / 60

254 SMO S31254 A182 F44 A351 CK3MCuN A182 F44

904L N08904 B625 NO8904 - B649 NO8904

Titanium R50400 B381 F2 B367 C2 B348 Gr.2

TRIM MATERIAL

1 F6 13Cr 13% Chromium 13% Chromium 13% Chromium X

2 304 18-8 Cr-Ni Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel X, Y, Z (e)

2H (d) 304 (Hardfaced) Stellite 6 Stellite 6 Type 304 Stainless Steel X, Y, Z (f)

Type 304 Stainless Steel

Stellite 6

5 Hardfaced Co Cr-A Stellite 6 Stellite 6 13% Chromium X, Y, Z (f)

13Cr 13% Chromium

Co Cr-A Stellite 6

13Cr 13% Chromium

Ni-Cr Ni-Cr

9 Monel Ni-Cu Alloy Monel Monel Monel X, Y, Z (e) (f)

10 316 18-8 Cr-Ni Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel X, Y, Z (e)

10H (d) 316(Hardfaced) Stellite 6 Stellite 6 Type 316 Stainless Steel X, Y, Z (f)

Ni-Cu Alloy Monel

Trim 5 or 5A Stellite 6

18-8 Cr-Ni Type 316 Stainless Steel

Trim 5 or 5A Stellite 6

13 Alloy 20 19-29 Cr-Ni Alloy 20 Alloy 20 Alloy 20 X, Y, Z (e)

19-29 Cr-Ni Alloy 20

Trim 5 or 5A Stellite 6

15 304L Type 304L Stainless Steel Type 304L Stainless Steel Type 304L Stainless Steel X, Y, Z (d)

15H 304L(Hardfaced) Stellite 6 Stellite 6 Type 304L Stainless Steel X, Y, Z (d)

Type 304L Stainless Steel

Stellite 6

16 316L Type 316L Stainless Steel Type 316L Stainless Steel Type 316L Stainless Steel X, Y, Z (d)

16H 316L(Hardfaced) Stellite 6 Stellite 6 Type 316L Stainless Steel X, Y, Z (d)

Type 316L Stainless Steel

Stellite 6

17 347 Type 347 Stainless Steel Type 347 Stainless Steel Type 347 Stainless Steel X, Y, Z (d)

17H 347 (Hardfaced) Stellite 6 Stellite 6

Type 347 Stainless Steel

Stellite 6

18 Hastelloy B Hastelloy B Hastelloy B Hastelloy B X, Y, Z (d)

18H (Hardfaced) Stellite 6 Stellite 6 Hastelloy B X, Y, Z (d)

Hastelloy B

Stellite 6

19 Hastelloy C Hastelloy C Hastelloy C Hastelloy C X, Y, Z (d)

19H Hastelloy C Stellite 6 Stellite 6 Hastelloy C X, Y, Z (d)

Hastelloy C

Stellite 6

20 Inconel Inconel Inconel Inconel X, Y, Z (d)

20H Inconel Stellite 6 Stellite 6 Inconel X, Y, Z (d)

Inconel

Stellite 6

0 (d)

(a) Trim numbers correspond to API 600.

(b) Base material equal to or better than the body / bonnet material corrosion resistance.

(c) Type of body seat ring X : Threaded renewable seat ring

Y : Seal-welded seat ring

Z : Integral seat

(d) These trim numbers are not included in API 600.

(e) Z type can be used when trim material is equal to that of body.

(f) Z type can be used for Globe and Lift Check valves.

Disk Seat Surface (b)Stem and

Other Trim Parts

Available (c)

Type of

Body Seat Ring

Trim (a)

No.

Nominal

Trim

Material

TypeBody Seat Surface (b)

F6 and

Hardfaced

8F6 and

Hardfaced

316 and

Hardfaced

16S

17S

2S

11

8A

12

18S

19S

20S

304 and

Hardfaced

Monel and

Hardfaced

316L and

Hardfaced

347 and

Hardfaced

Hastelloy B

and Hardfaced

Hastelloy C

Inconel

Alloy 20 and

Hardfaced14

15S304L and

Hardfaced

The Other Combination

Type 304L Stainless Steel

Type 304 Stainless Steel

13% Chromium

13% Chromium

Monel

Type 316 Stainless Steel

Alloy 20

Type 316L Stainless Steel

Type 347 Stainless Steel

Hastelloy B

Inconel

X, Y, Z (d)

X, Y, Z (f)

X, Y, Z (f)

X, Y, Z (f)

X, Y, Z (f)

X, Y, Z (f)

X, Y, Z (d)

X, Y, Z (d)

X, Y, Z (d)

X, Y, Z (d)

X, Y, Z (d)

Copyright(c) KINKA KIKAI CO., LTD. All right reserved. ( A7 )

Cast Steel Wedge Gate ValvesVálvulas S.L.

TOCINA

AISI 1035

Packing Gland

Packing Plate

Body

Nut

Stem

Seat

Wedge

Gasket

Bonnet

Stud Bolting

Packing

Back Seat

Eye Bolt

Stem Nut

Nut

ASTM A216 WCB

ASTM A216 WCB

Graphite + St/St

ASTM A193 B7M

ASTM A194 2HM

ASTM A182 F6

A105 + Stellite

ASTM A216 WCB + F6

ASTM A193 B7M

ASTM 276 410

ASTM A216 WCB

ASTM A182 F6

Flexible Graphite

ASTM A194 2HM

A439 D2

Inner Hex Nut

Bearing Gland

Grease Nipple

Rivet

Hex Nut

Handwheel

Name Plate

Pin

BL2/Cu

1Cr18Ni9Ti/304

ASTM A395

ASTM A276 304

C/Steel

AISI1035

Cu

Design & Manufacture Standards

* Design & Manufacture to: API 600/BS EN ISO 10434:2004* Press/Temp to ANSI B16.34* Face to face to ANSI B16.10* Flange Dimensions/Connections to ASME B16.5: ASME B16.47: ASME B16.25* Test & Inspection to API 598/ISO 5208/EN 12266-1* NACE MR-01-75 (Latest Revision)* Conform to Pressure Equipment Directive 97/23/EC

Standard Material Specification - API Trim No 8

Carbon Steel Alloy Steel Stainless SteelPart

Body

Bonnet

Stem

Stud

Nut

Yoke

Back Seat

Packing Bush

Packing Plate

A216 WCB

A216 WCB

A216 WCB

A216 WCB

A182 F6a

A182 F6a

A193 B7

A194 2H

A276 410

A352 LCB

A352 LCB

A352 LCB

A352 LCB

A182 F304

A182 F304

A276 304

A320 L7

A194 4

A217 WC6

A217 WC6

A217 WC6

A182 F304 A182 F304 A182 F304 A182 F304 A182 F304L

A193 B16 A193 B16

A194 4 A194 4

A182 F304

A217 WC6

A276 304

A217 WC9

A217 WC9

A217 WC9

A217 WC9

A182 F304

A276 304

A217 C5

A217 C5

A217 C5

A217 C5

A193 B8 A193 B8 A193 B8

A194 8 A194 8 A194 8

A182 F304 A182 F304 A182 F304L

A276 304 A276 304 A276 304

A351 CF8

A351 CF8

A351 CF8

A351 CF8

A351 CF8M

A351 CF8M

A351 CF8M

A351 CF8M

A182 F316

A182 F316

A276 316

A193 B8M

A194 8M

A351 CF3

A351 CF3

A351 CF3

A351 CF3

A351 CF3M

A351 CF3M

A351 CF3M

A351 CF3M

A182 F316L

A182 F316L

A193 B8M A193 B8M

A194 8M A194 8M

A276 316

CD4MCU

CD4MCU

CD4MCU

CD4MCU

F51

F51

F51

Standard Materials (Trims as API600 - 3)