Pip Pnsmv005

COMPLETE REVISION March 2010

Process Industry Practices

Piping

PIP PNSMV005 Carbon Steel Check Valve Descriptions

Copyright Process Industry Practices Provided by IHS under license with PIP Licensee=Jacobs ASTM & PIP Only/3219500105

Not for Resale, 06/25/2012 13:29:27 MDTNo reproduction or networking permitted without license from IHS

--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has been

prepared from the technical requirements in the existing standards of major industrial users,

contractors, or standards organizations. By harmonizing these technical requirements into a single

set of Practices, administrative, application, and engineering costs to both the purchaser and the

manufacturer should be reduced. While this Practice is expected to incorporate the majority of

requirements of most users, individual applications may involve requirements that will be appended

to and take precedence over this Practice. Determinations concerning fitness for purpose and

particular matters or application of the Practice to particular project or engineering situations should

not be made solely on information contained in these materials. The use of trade names from time

to time should not be viewed as an expression of preference but rather recognized as normal usage

in the trade. Other brands having the same specifications are equally correct and may be substituted

for those named. All Practices or guidelines are intended to be consistent with applicable laws and

regulations including OSHA requirements. To the extent these Practices or guidelines should

conflict with OSHA or other applicable laws or regulations, such laws or regulations must be

followed. Consult an appropriate professional before applying or acting on any material contained

in or suggested by the Practice.

This Practice is subject to revision at any time.

Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at

Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and

Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not

permitted within any PIP Practice without the express written authorization of PIP. Authorized Users

may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of

PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the

Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for

proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific

project by Authorized Users client. PIPs copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party

with copies of the Practice.

PRINTING HISTORY

October 1995 Issued February 1999 Complete Revision November 2003 Technical Revision

February 1997 Revision May 2000 Revision November 2005 Technical Revision

June 1998 Revision April 2001 Revision March 2010 Complete Revision

Not printed with State funds



--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---

COMPLETE REVISION March 2010

Process Industry Practices Page 1 of 23

Process Industry Practices

Piping

PIP PNSMV005 Carbon Steel Check Valve Descriptions

Table of Contents

1. Introduction ................................. 2 1.1 Purpose ............................................. 2 1.2 Scope ................................................. 2

2. References ................................... 2 2.1 Process Industry Practices ................ 2

3. Valve Designation System .......... 2

4. Notes ........................................... 2

5. Cross Reference ......................... 3

6. Valve Descriptions ..................... 4



--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---

PIP PNSMV005 COMPLETE REVISION Carbon Steel Check Valve Descriptions March 2010

Page 2 of 23 Process Industry Practices

1. Introduction

1.1 Purpose

This Practice provides requirements for suppliers providing carbon steel check valves

included in PIP Piping Line Class Material Specifications.

1.2 Scope

This Practice describes the requirements for carbon steel check valves.

2. References

Applicable parts of the following Practice shall be considered an integral part of this Practice.

The edition in effect on the date of contract award shall be used, except as otherwise noted.

Short titles will be used herein where appropriate.

2.1 Process Industry Practices (PIP)

PIP PNCM0004 - Valve Commodity Codes Designator System

3. Valve Designation System

3.1 For a full explanation of the format used to structure the valve numbers listed within

this Practice, refer to PIP PNCM0004.

3.2 This Practice provides descriptions for three types of check valves: dual plate, lift,

swing. Therefore, the first two characters in the valve numbers are CD (dual plate),

CL (lift), and CS (swing).

3.3 The valves listed in Section 5 and Section 6 of this Practice are sorted by the unique

valve number designation in ascending alphanumeric sequence (e.g., CD01CA500,

CL03CB500, CS03CA500).

4. Notes

4.1 Occasionally, valve size ranges listed in this Practice are broader than the size ranges

shown for the same valves on a piping line class material specification. While the

most common practice has been used to specify valve size ranges on line class specifications, a purchaser may need to utilize a valve in a size outside this common practice choice. Thus, for reference purposes, the full size range for which a given valve is typically manufactured is shown in this Practice.

4.2 Requirements for accessories (e.g., dampeners, dash pots, slam retarders, power

assists) for swing check valves will not be specified in piping line specifications or

valve descriptions. Purchasers shall define the requirements for such accessories in

their specifications.



--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---

COMPLETE REVISION PIP PNSMV005 March 2010 Carbon Steel Check Valve Descriptions


5. Cross Reference

Valve Number Applicable Line Classes

CD01CA500 1CA1S01

CD01CA700 1CA1S01

CD01CA701 1CA1S01

CD01CA702 1CA1S01

CD01CB500 1CB1S01, 1CB2S01, 1CS1B02

CD01CB700 1CB1B01, 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01, 1SA0B01

CD01CB701 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01

CD01CB702 1CB1S01, 1CB2S01, 1CS1B02

CD03CA500 3CA1S01

CD03CA700 3CA1S01

CD03CA701 3CA1S01

CD03CA702 3CA1S01

CD03CB500 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01

CD03CB700 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01, 3SA0B01

CD03CB701 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01

CD03CB702 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01

CD06CA500 6CA1S01

CD06CA700 6CA1S01

CD06CA701 6CA1S01

CD06CA702 6CA1S01

CD06CB500 6CB1S01, 6CB2S01

CD06CB700 6CB1S01, 6CB2S01, 6SA0B01

CD06CB701 6CB1S01, 6CB2S01

CD06CB702 6CB1S01, 6CB2S01

CD09CB500 9CB1S01, 9CB2S01

CD09CB700 9CB1S01, 9CB2S01

CD09CB701 9CB1S01, 9CB2S01

CD15CB700 15CB1S01, 15CB2S01

CD15CB701 15CB1S01, 15CB2S01

CL01CB500 1CB1B01, 1CS1B02, 1SA0B01

CL03CB500 3CS1B01, 3CS2B01, 3SA0B01

CL06CB500 6SA0B01

CL08CA300 1CA1S01, 3CA1S01, 6CA1S01

CL08CB300 1CB1S01, 1CB2S01, 1CS1S01, 1CS1S02, 1CS2S01, 3CB1S01, 3CB2S01, 3CS1S01, 3CS1S02, 3CS2S01, 6CB1S01, 6CB2S01

CL08CB301 6CS1S01

CL15CB300 9CB1S01, 9CB2S01, 15CB1S01, 15CB2S01

CL15CB301 9CS1S01, 15CS1S01

CS01CA500 1CA1S01



--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---



CS01CA501 1CA1S01

CS01CB500 1CB1B01, 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01, 1SA0B01

CS01CB501 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01

CS01CB550 1CS1J01

CS03CA500 3CA1S01

CS03CA501 3CA1S01

CS03CB500 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01, 3SA0B01

CS03CB501 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01

CS03CB550 3CS1J01

CS06CA500 6CA1S01

CS06CA501 6CA1S01

CS06CB500 6CB1S01, 6CB2S01, 6SA0B01

CS06CB501 6CB1S01, 6CB2S01

CS06CB800 6CS1S01

CS06CB801 6CS1S01

CS09CB500 9CB1S01, 9CB2S01

CS09CB800 9CS1S01

CS15CB500 15CB1S01, 15CB2S01

CS15CB800 15CS1S01

6. Valve Descriptions

Description of CHECK Valve (CD01CA500):

Type:............................. CHECK

Valve Size:....................... NPS 8 -to- NPS 24

Class:............................ 150

Ends:............................. FLANGED RF

Body:............................. ITCS (ASTM A352 - LCB or A352 - LCC)

Trim:............................. API 594 TRIM 10

Closure Member:................... 316 SS

Seat:............................. 316 SS

Hinge Pin:........................ 316 SS

Springs:.......................... INCONEL X

Stop Pin:......................... 316 SS

Design Type:...................... DUAL PLATE

Body Type:........................ DOUBLE-FLANGED

Installation:..................... HORIZONTAL - HINGE PIN VERTICAL or VERTICAL - UPWARD FLOW

The standards are:

DESIGN - API 594

ENDS - ASME B16.5

RATING - ASME B16.34

TESTING - API 598

DIMENSIONAL - API 594



--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 150

Ends:............................. WAFER


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 150

Ends:............................. WAFER


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.47 SERIES B


TESTING - API 598



Type:............................. CHECK


Class:............................ 150

Ends:............................. LUGGED BOLT HOLES TAPPED


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---



Description of CHECK Valve (CD01CB500):

Type:............................. CHECK


Class:............................ 150

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS




The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 150

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 150

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594



TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 150


Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS




The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 300

Ends:............................. WAFER


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 300

Ends:............................. WAFER


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594



TESTING - API 598



Type:............................. CHECK


Class:............................ 300



Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS




The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 300

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 300

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594



TESTING - API 598



Type:............................. CHECK


Class:............................ 300


Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS




The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. WAFER


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. WAFER


Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594



TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 600



Trim:............................. API 594 TRIM 10


Seat:............................. 316 SS

Hinge Pin:........................ 316 SS


Stop Pin:......................... 316 SS


Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS




The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 600

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ WAFER


The standards are:

DESIGN - API 594



TESTING - API 598



Type:............................. CHECK


Class:............................ 600


Body:............................. CS (ASTM A216 - WCB)

Trim:............................. API 594 TRIM 1


Seat:............................. 410 SS

Hinge Pin:........................ 410 SS


Stop Pin:......................... 410 SS


Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 900

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)

Cover/Bonnet:..................... CS (ASTM A216 - WCB)

Hard Facing:...................... HALF






The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 900

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)


Hard Facing:...................... HALF




Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 900


Body:............................. CS (ASTM A216 - WCB)


Hard Facing:...................... HALF




Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 1500

Ends:............................. WAFER

Body:............................. CS (ASTM A216 - WCB)

Hard Facing:...................... HALF




Body Type:........................ WAFER


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 1500


Body:............................. CS (ASTM A216 - WCB)

Hard Facing:...................... HALF




Body Type:........................ LUG


The standards are:

DESIGN - API 594

ENDS - ASME B16.5


TESTING - API 598


Description of CHECK Valve (CL01CB500):

Type:............................. CHECK

Valve Size:....................... NPS 1/2 -to- NPS 2

Class:............................ 150

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A105 or A216 - WCB)

Cover/Bonnet:..................... CS (ASTM A105 or A216 - WCB)

Trim:............................. 13 CR, API 602 TRIM 8

Hard Facing:...................... HALF

Design Type:...................... PISTON

Cover/Bonnet Type:................ BOLTED

Body-Bonnet Gaskets:.............. API 602

Body-Bonnet Bolting:.............. BOLTS: ASTM A193 - B7

NUTS: ASTM A194 - 2H

Installation:..................... HORIZONTAL - COVER UP

The standards are:

DESIGN - API 602

ENDS - ASME B16.5

RATING - API 602

DIMENSIONAL - ASME B16.10


Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF



Trim:............................. 13 CR, API 602 TRIM 8

Hard Facing:...................... HALF







The standards are:

DESIGN - API 602

ENDS - ASME B16.5

RATING - API 602




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF



Trim:............................. 13 CR, API 602 TRIM 8

Hard Facing:...................... HALF







The standards are:

DESIGN - API 602

ENDS - ASME B16.5

RATING - API 602


Description of CHECK Valve (CL08CA300):

Type:............................. CHECK


Class:............................ 800

Ends:............................. SW

Body:............................. CS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)

Cover/Bonnet:..................... CS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)

Trim:............................. 316 SS, API 602 TRIM 12

Hard Facing:...................... HALF




Body-Bonnet Bolting:.............. BOLTS: ASTM A320 - L7

NUTS: ASTM A194 - 4


The standards are:

DESIGN - API 602

ENDS - ASME B16.11

RATING - API 602

DIMENSIONAL - MFG STD


Type:............................. CHECK


Class:............................ 800

Ends:............................. SW



Trim:............................. 13 CR, API 602 TRIM 8

Hard Facing:...................... HALF







The standards are:

DESIGN - API 602

ENDS - ASME B16.11

RATING - API 602




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 800

Ends:............................. SW



Trim:............................. STELLITE 6, API 602 TRIM 5

Hard Facing:...................... FULL







The standards are:

DESIGN - API 602

ENDS - ASME B16.11

RATING - API 602



Type:............................. CHECK


Class:............................ 1500

Ends:............................. SW



Trim:............................. 13 CR, API 602 TRIM 8

Hard Facing:...................... HALF







The standards are:

DESIGN - API 602

ENDS - ASME B16.11


TESTING - API 598



Type:............................. CHECK


Class:............................ 1500

Ends:............................. SW




Hard Facing:...................... FULL







The standards are:

DESIGN - API 602

ENDS - ASME B16.11

RATING - API 602




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---



Description of CHECK Valve (CS01CA500):

Type:............................. CHECK


Class:............................ 150

Ends:............................. FLANGED RF


Cover/Bonnet:..................... ITCS (ASTM A352 - LCB or A352 - LCC)

Trim:............................. 316 SS, API 600 TRIM 12

Hard Facing:...................... HALF

Design Type:...................... SWING




NUTS: ASTM A194 - 4

Installation:..................... HORIZONTAL - COVER UP or VERTICAL - UPWARD FLOW

The standards are:

DESIGN - API 600, as applicable

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 150

Ends:............................. FLANGED RF



Trim:............................. 316 SS, API 600 TRIM 12

Hard Facing:...................... HALF





NUTS: ASTM A194 - 4


The standards are:


ENDS - ASME B16.47 SERIES B RATING - ASME B16.34

TESTING - API 598 DIMENSIONAL - ASME B16.10 (NPS 26 -to- NPS 36)

MFG STD (NPS 38 -to- NPS 48)

Description of CHECK Valve (CS01CB500):

Type:............................. CHECK


Class:............................ 150

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:


ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 150

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:




TESTING - API 598

DIMENSIONAL - ASME B16.10 (NPS 26 -to- NPS 36)



Type:............................. CHECK


Class:............................ 150

Ends:............................. FLANGED RF and OVERSIZED REDUCING FLANGES

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF



Jacket:........................... FULL JACKET - PIP PNFJ8750 and F-NPT CONNECTIONS

Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE RING, or API 600



Installation:..................... HORIZONTAL or VERTICAL

The standards are:

DESIGN - ASME B16.34

ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF



Trim:............................. 316 SS, API 600 TRIM 12

Hard Facing:...................... HALF





NUTS: ASTM A194 - 4


The standards are:


ENDS - ASME B16.5


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF



Trim:............................. 316 SS, API 600 TRIM 12

Hard Facing:...................... HALF





NUTS: ASTM A194 - 4


The standards are:




TESTING - API 598




Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:


ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:




TESTING - API 598





--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 300

Ends:............................. FLANGED RF and OVERSIZED REDUCING FLANGES

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF



Jacket:........................... FULL JACKET - PIP PNFJ8750 and F-NPT CONNECTIONS

Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE RING, or API 600



Installation:..................... HORIZONTAL or VERTICAL

The standards are:


ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF



Trim:............................. 316 SS, API 600 TRIM 12

Hard Facing:...................... HALF





NUTS: ASTM A194 - 4


The standards are:


ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF



Trim:............................. 316 SS, API 600 TRIM 12

Hard Facing:...................... HALF





NUTS: ASTM A194 - 4


The standards are:




TESTING - API 598

DIMENSIONAL - ASME B16.10 - LONG PATTERN (NPS 26 -to- NPS 36)




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:


ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 600

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:




TESTING - API 598




Type:............................. CHECK


Class:............................ 600

Ends:............................. BW

Body:............................. CS (ASTM A216 - WCB)



Hard Facing:...................... FULL







The standards are:


ENDS - ASME B16.25


TESTING - API 598




--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 600

Ends:............................. BW

Body:............................. CS (ASTM A216 - WCB)



Hard Facing:...................... FULL







The standards are:


ENDS - ASME B16.25


TESTING - API 598




Type:............................. CHECK


Class:............................ 900

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:


ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 900

Ends:............................. BW

Body:............................. CS (ASTM A216 - WCB)



Hard Facing:...................... FULL


Cover/Bonnet Type:................ PRESSURE SEAL

Body-Bonnet Gaskets:.............. MFG STD




The standards are:


ENDS - ASME B16.25


TESTING - API 598





--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---




Type:............................. CHECK


Class:............................ 1500

Ends:............................. FLANGED RF

Body:............................. CS (ASTM A216 - WCB)


Trim:............................. 13 CR, API 600 TRIM 8

Hard Facing:...................... HALF







The standards are:


ENDS - ASME B16.5


TESTING - API 598



Type:............................. CHECK


Class:............................ 1500

Ends:............................. BW

Body:............................. CS (ASTM A216 - WCB)



Hard Facing:...................... FULL


Cover/Bonnet Type:................ PRESSURE SEAL

Body-Bonnet Gaskets:.............. MFG STD




The standards are:


ENDS - ASME B16.25


TESTING - API 598





--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---

Documents

Pip Pnsmv005