Upload
efosa-aigbe
View
243
Download
0
Embed Size (px)
Citation preview
8/10/2019 Pilot Pioneer Operation Guide V9.2
1/47
Operation Guide
Pilot Pioneer V9.2
8/10/2019 Pilot Pioneer Operation Guide V9.2
2/47
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
8/10/2019 Pilot Pioneer Operation Guide V9.2
3/47
Software Installation
Pilot Pioneer is based on .net Framework 4.0. If it is not installed, please go to
Microsoft Download Center to download and install it properly before Pilot
Pioneer installation.
8/10/2019 Pilot Pioneer Operation Guide V9.2
4/47
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
8/10/2019 Pilot Pioneer Operation Guide V9.2
5/47
Menu BarTool Bar
Navigation
Pane
Project Device
Workspace GIS InfoGIS
Workspace
Main Interface
8/10/2019 Pilot Pioneer Operation Guide V9.2
6/47
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
8/10/2019 Pilot Pioneer Operation Guide V9.2
7/47
Create/Open a
project
Import Map
Connect devicesConfigure system Configure test
plans
Record data files
and execute test
tasks
Check data filesReplay data filesExport data files
Note: The steps with dashed
arrow are optional.
Import Site Database
Perform statistics
and analysis
Operation Procedure
8/10/2019 Pilot Pioneer Operation Guide V9.2
8/47
Create a
project
Create/Open a Project
Open a
project
Import Project: Users may import the saved configuration, such as device, and test plan by importing a project.
8/10/2019 Pilot Pioneer Operation Guide V9.2
9/47
Import Site
Import site database
Import Site: When checking the test route on the Map window, users may import sites to check the site linking.
8/10/2019 Pilot Pioneer Operation Guide V9.2
10/47
System ConfigurationMessage Settings
Message Setting
Users may check the message settings in the Message Setting window.
Select required
message in the
navigation pane.
Select a message to modify its name
and color.
Modify the messageproperty.
8/10/2019 Pilot Pioneer Operation Guide V9.2
11/47
System ConfigurationEvent Settings
Users may check the event settings in the Event Setting window.
Select required
message in the
navigation pane.
Select an event to modify its name
and color.
Modify the event
property.
Event setting
8/10/2019 Pilot Pioneer Operation Guide V9.2
12/47
System ConfigurationParameter Settings
Parameter
Setting
Select a network.
Select a parameter to modify its name
and color. Select a parameter to
modify its threshold.
Users may check the parameter settings in the Parameter Setting window.
8/10/2019 Pilot Pioneer Operation Guide V9.2
13/47
Users may
perform data
division
configuration
by time or
size in theGeneraland
Advancetab
pages.
Record setting
System ConfigurationRecord Settings
8/10/2019 Pilot Pioneer Operation Guide V9.2
14/47
Connect Devices
Double-click a device formanual device configuration.
Users need to manually configure the deviceand port information for manual configuration.
8/10/2019 Pilot Pioneer Operation Guide V9.2
15/47
Connect Devices
Click the automatic detect for
automatic device configuration.Pilot Pioneer may automatically perform device
and port configuration.
8/10/2019 Pilot Pioneer Operation Guide V9.2
16/47
Configure Test Plan
The following figure shows the FTP service test plan
configuration.
Users may click
Test Plan in the
device control
window to configureits test plan.
Users may click a test service and configure its test plan as required.
8/10/2019 Pilot Pioneer Operation Guide V9.2
17/47
Record Data Files
Click this button to start recording data files.
8/10/2019 Pilot Pioneer Operation Guide V9.2
18/47
Record Data Files
The recorded data files are saved in this path.
If data files are not recorded, the files will be saved
as temporary files in the TempLogFiles directory.
8/10/2019 Pilot Pioneer Operation Guide V9.2
19/47
Execute Test Plan
In the Device Control page, click Start Allto execute
the test plan.
8/10/2019 Pilot Pioneer Operation Guide V9.2
20/47
Check Data Files
Users may enter letters in the search box for fuzzy searchas required.
Click this button to filter messages (Layer 1, Layer 2,and Layer 3 as required.
8/10/2019 Pilot Pioneer Operation Guide V9.2
21/47
Check Data Files
Double-click a message to check the message
details.Message details
During test, users may click this button to freeze the message or event
screen to check data details as required.
8/10/2019 Pilot Pioneer Operation Guide V9.2
22/47
Replay Data Files
After test stops, users may click this button and select data files to replay.
8/10/2019 Pilot Pioneer Operation Guide V9.2
23/47
Replay Data Files
Users may click these buttons to replay forward, backward, or drag the speed button to replay at any arbitrary position.
8/10/2019 Pilot Pioneer Operation Guide V9.2
24/47
Divide Data Files
Users may divide data files based
on device ID, time, and region.
Users may choose Tools> Merge/DivideLogfileto merge/divide data files as
required.
Click Addto add data files, select
data files to be divided/merged, and
click Divide/Merge.
8/10/2019 Pilot Pioneer Operation Guide V9.2
25/47
Perform Data Statistics
Users may perform KPI statistics and analysis, and generate multiple reports as required.
Take KPI statistics as an example, after selecting a data file, users may set parameters, event, chart, coverage map,
etc, and generate statistics report based on the settings.
8/10/2019 Pilot Pioneer Operation Guide V9.2
26/47
Export Data Files
Users may right-click a data file and select Export
Logfile to export the file.
Click Settingsto enter the Template Settings window
to select parameters for export.
After selecting parameters, click Saveto
save the template and then click Export
to export the data file.
8/10/2019 Pilot Pioneer Operation Guide V9.2
27/47
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
8/10/2019 Pilot Pioneer Operation Guide V9.2
28/47
VoLTE and MOS Test Supported
Pilot Pioneer 9.2 supports MOS test for VoLTE service, and may select PESQ or POLQA algorithm
based on the VoLTE coding rate. In addition, SIP messages can be decoded and event can be defined
in this version.
8/10/2019 Pilot Pioneer Operation Guide V9.2
29/47
Label Function Added
On the Layer Manager window, users may set the font, size, and color of the label for imported
path, street, etc.
8/10/2019 Pilot Pioneer Operation Guide V9.2
30/47
Layer Offset Configuration
On the Layer Manager window, users may set layer offset (up or down) as required, which provide
the possibility to perform parameter comparison from the same device over different time ranges
or different devices over the same time range.
8/10/2019 Pilot Pioneer Operation Guide V9.2
31/47
Time Informaiton Added to the Line Chart Window
In the Line Chart window, time information is added to show the start, current, and end (user-defined)
time of the service test.
X axis width: the duration between the start time and end time.
8/10/2019 Pilot Pioneer Operation Guide V9.2
32/47
Google Earth Added
In the Map window, Google Earth is added. Users may switch between Google Earth and others
just by one-click.
8/10/2019 Pilot Pioneer Operation Guide V9.2
33/47
New Statistics Report Supported
Pilot Pioneer 9.2 supports MT-MO report, evaluation report, CSFB report, and benchmarking
report, which is compatible with Pilot Navigators statistics functions
8/10/2019 Pilot Pioneer Operation Guide V9.2
34/47
Automatic File Creation Function Supported for Upload Test
For upload service test (such as FTP UL and Multi FTP UL), the software may automatically createfiles to be uploaded with specified size, which improves test configuration efficiency.
8/10/2019 Pilot Pioneer Operation Guide V9.2
35/47
Test Route Bird's EyeView Supported
In the Map window, users may click the icon as shown in the following figure to show the
test route bird's eye view. This function is only valid during data replay.
8/10/2019 Pilot Pioneer Operation Guide V9.2
36/47
Python Scripting and New Site Database Format
1. Pilot Pioneer 9.2 supports Python script.
2. The site database in the following formats can be imported into Pilot Pioneer:
Asset (WCDMA) Atoll (GSM, CDMA and WCDMA)
Planet (GSM)
The current serving cell name can be exported (the site database must have been
imported).
8/10/2019 Pilot Pioneer Operation Guide V9.2
37/47
New Devices
Pilot Pioneer supports the following new devices:
Huawei D2-5000
Supported network technologies and frequencyTDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
Huawei D2-6070
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
LC5171
MiFi
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 150 Mbps (DL); 50 Mbps (UL)
New Devices
8/10/2019 Pilot Pioneer Operation Guide V9.2
38/47
New Devices
LC8161
PAD
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHzData rate:
LTE: 150 Mbps (DL); 50 Mbps (UL)
SAMSUNG S4 i9508c
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHzUMTS: 900/2100 MHz
GSM: 850/900/1800/1900 MHz
CSFB (Circuit Switched Fallback)
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
Qualcomm msm 8974
Supported network technologies and frequency and bandsTDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
VoLTE
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
iPhone 5s
Supported network technologies and
frequency and bands
Model: A1530* (recommended)
FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20)
TDD-LTE (Bands 38, 39, 40)
UMTS/HSPA+/DC-HSDPA (850, 900, 1900,
2100 MHz)
GSM/EDGE (850, 900, 1800, 1900 MHz)
8/10/2019 Pilot Pioneer Operation Guide V9.2
39/47
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
8/10/2019 Pilot Pioneer Operation Guide V9.2
40/47
Check Authentication for HiSilicon Devices
HiSilicon devices include commercial terminals and test terminals. Only authenticated test terminals can be
used for test.
After installing the driver, users may open the device manager to check the port. If there is only one or
two ports, then the device is a commercial device.
If all the related ports are well detected, then open the agent and click the second tab page. If
Connectedis displayed under Status, the device is authenticated and can be used for test.
Matching Relationship Between Hisilicon LTE Devices and
8/10/2019 Pilot Pioneer Operation Guide V9.2
41/47
Matching Relationship Between Hisilicon LTE Devices and
the Client Software Version
Device Model Client Version
Hisilicon E398 1.0.26.0
Hisilicon CPE
2.4.0
Hisilicon MiFi E5776s-860 (black 3.0.1
Hisilicon MiFi E5776s-860 (white 2.2.0.0
Hisilicon E3276S-861/150 2.2.0.0
8/10/2019 Pilot Pioneer Operation Guide V9.2
42/47
Enable Engineering Mode for Quanta D1
To enable engineering mode for Quanta D1, do as follows:
For Windows XP: Connect D1 to the PC. Run HyperTerminal, enter the ATcommand, and the
system returns response with OK. Enter AT*QMODE=3,1, and then the system returns response
with OK.
For Windows 7: Download HyperTerminal, and refer to the steps described in the Windows XP
environment after installation.
8/10/2019 Pilot Pioneer Operation Guide V9.2
43/47
1. Users need to uninstall the previous version of Pilot Pioneer before installing a later version. If GIS isstill abnormal, the possible reason is that the GIS control is not registered successfully. Users may
double click RegComList.exein the installation path of the pilot pioneer for manual registration.
2. By default, Pilot Pioneer may save RCU data files in the .ddib format, which can be used for
statistics and analysis. Users may choose Record> RecordConfiguration, and click Advanceto
set whether to save RCU data files.
GIS and RCU Data Files Related Problems
8/10/2019 Pilot Pioneer Operation Guide V9.2
44/47
3. Data files in the .ddib format cannot be divided by size currently.
4. After merging/dividing data files, no user-prompt success information is displayed currently.
GIS and RCU Data Files Related Problems
8/10/2019 Pilot Pioneer Operation Guide V9.2
45/47
Pilot Pioneer needs to send commands to the device to enable the USB Network Sharing mode for automatic
device detection. A network adapter will be mapped in the PC system for the device, and the PC system will
perform automatic detection, that is, to load the device. If users connect the device before the device is
completely loaded, no information may be displayed on the interface.
Attention on Samsung S3 (ADB) Connection to Pilot Pioneer
Attention on Samsung S3 (ADB) Connection to Pilot Pioneer
8/10/2019 Pilot Pioneer Operation Guide V9.2
46/47
Keep the USB Tethering option disabled before connecting Samsung S3 to Pilot Pioneer and do not
modify it during service test.
If no device is detected, do as follows:
1. Check if any Android management tool (such as Snap Pea) on the phone is running? Make sure to
turn it off before test.
2. Check if ROOT software/tool is installed on the Android phone, as the ROOT tool will generate
some dynamic databases that may conflict with those of Pilot Pioneer (such as AdbWinUsbApi.dll,
AdbWinApi.dll, and adb.exe).
If the problem is caused by the installation of ROOT tool, there are two methods to solve the problem.
a. Uninstall ROOT and restart the PC.b. Copy the three dynamic databases mentioned above to the ADB file in the Pilot Pioneer
installation path (\Program Files\DingLi\Pilot Pioneer9.1.*.****\ADB\) to replace the existed ones.
Attention on Samsung S3 (ADB) Connection to Pilot Pioneer
8/10/2019 Pilot Pioneer Operation Guide V9.2
47/47
Thank You!