PIF GAS SERVICING SYSTEMS (SECTION –B) Page | 58 · 2019. 1. 17. · VP03 15NB 400 PN420 2 way Reduced bore Threaded Vent NIL All threaded valves shall be of but weld union type

PIF GAS SERVICING SYSTEMS (SECTION –B) P a g e | 58

SDSC SHAR PSLV INTEGRATION FACILITIES(PIF) PIF-GSS

Sr.No Tag No

Valve size (DN)

MOP bar(a)

PN Rating

Ball Valve type End connection

both ends Umbilical

designation Remark

s

81. VP03 15NB 400 PN420 2 way Reduced bore Threaded I/L Path2 LF NIL

82. VP04 15NB 400 PN420 2 way Reduced bore Threaded I/L Path2 HF NIL

GN2:PRU-607


84. VP02 15NB 400 PN420 2 way Full bore Threaded I/L Path1 HF NIL



GN2:PRU-608



89. VP03 15NB 400 PN420 2 way Reduced bore Threaded I/L Path2LF NIL

90. VP04 15NB 400 PN420 2 way Full bore Threaded I/L Path2HF NIL

GN2:NDU-601

91. VP01 15NB 400 PN420 2 way Reduced bore Threaded NDU-01Path1 NIL

92. VP02 15NB 400 PN420 2 way Reduced bore Threaded NDU-01 Path1 NIL

93. VP03 15NB 400 PN420 2 way Reduced bore Threaded NDU-01 vent NIL

GN2:VB-602

94. VP01 15NB 240 PN420 2 way Reduced bore Threaded Path1 NIL


96. VP03 15NB 240 PN420 2 way Reduced bore Threaded Vent NIL

GN2:VB-603






Sr.No Tag No

Valve size (DN)

MOP bar(a)

PN Rating

Ball Valve type End connection

both ends Umbilical

designation Remark

s

GN2:VB-604




GHE:HDU-501




GHE:HRU-501




All threaded valves shall be of but weld union type with metric /BSSP Threaded only (No NPT is allowed )



Table 9: List of Manual Valves

Sr.No TAG NO

Size (DN)

Ball valve Type End connection

both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

GN2:EVU-01 1. VM01 15 Full bore Flanged/ Threaded 8 PN50 EP Valve CMD I/L NIL 2. VM02 15 Reduced bore Flanged/ Threaded 8 PN50 EP Valve CMD line vent NIL 3. VM03 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar I/L NIL 4. VM04 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar line vent NIL 5. VM05 15 Full bore Flanged/ Threaded 28 PN50 UCEVV/UGTV I/L NIL 6. VM06 15 Full bore Flanged/ Threaded 28 PN50 UCHFV I/L NIL 7. VM07 15 Reduced bore Flanged/ Threaded 13.5 PN50 UPVFM line vent NIL 8. VM08 15 Full bore Flanged/ Threaded 13.5 PN50 UPVFM I/L NIL 9. VM09 15 Full bore Flanged/ Threaded 13.5 PN50 UPVFN I/L NIL 10. VM10 15 Reduced bore Flanged/ Threaded 13.5 PN50 UPVFN line vent NIL 11. VM11 15 Reduced bore Flanged/ Threaded 6 PN50 UGPM I/L NIL 12. VM12 15 Reduced bore Flanged/ Threaded 6 PN50 UGPN I/L NIL 13. VM13 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 Utility 6.0bar I/L NIL 14. VM14 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 Utility 6.0bar line vent NIL

GHE:EVU-01 15. VM15 15 Reduced bore Threaded 400 PN420 UHFV I/L NIL 16. VM16 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar I/L NIL 17. VM17 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar line vent NIL 18. VM18 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar I/L NIL 19. VM19 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar line vent NIL

GN2:EVU-02 20. VM01 15 Full bore Flanged/ Threaded 8 PN50 EP Valve CMD I/L NIL 21. VM02 15 Reduced bore Flanged/ Threaded 8 PN50 EP Valve CMD line vent NIL 22. VM03 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar I/L NIL 23. VM04 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar line vent NIL



Sr.No TAG NO

Size (DN)


both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

24. VM05 15 Full bore Flanged/ Threaded 28 PN50 UCVPG/NT/UT I/L NIL 25. VM06 15 Full bore Flanged/ Threaded 28 PN50 UCVPP/NB/UB I/L NIL 26. VM07 15 Full bore Flanged/ Threaded 28 PN50 UCVGPN/UCEVV I/L NIL 27. VM08 15 Full bore Flanged/ Threaded 28 PN50 UCVFH I/L NIL 28. VM09 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 UTILITY 6.0bar I/L NIL 29. VM10 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 UTLY 6.0BAR line vent NIL 30. VM11 15 Full bore Flanged/ Threaded 6 PN50 UVGPN I/L NIL

GHE:EVU-02 31. VM12 15 Reduced bore Threaded 400 PN420 UFBH I/L NIL 32. VM13 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar I/L NIL 33. VM14 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar line vent NIL 34. VM15 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar I/L NIL 35. VM16 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar line vent NIL

GN2:EVU-03 36. VM01 15 Full bore Flanged/ Threaded 8 PN50 EP Valve CMD I/L NIL 37. VM02 15 Reduced bore Flanged/ Threaded 8 PN50 EP Valve CMD line vent NIL 38. VM03 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar I/L NIL 39. VM04 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar line vent NIL 40. VM05 15 Full bore Flanged/ Threaded 28 PN50 UCVGPO I/L NIL 41. VM06 15 Full bore Flanged/ Threaded 28 PN50 UCVGPU I/L NIL 42. VM07 25 Full bore Flanged/ Threaded 28 PN50 HRCM I/L NIL 43. VM08 15 Reduced bore Flanged/ Threaded 28 PN50 HRCM line vent NIL 44. VM09 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 UTILITY 6.0bar I/L NIL 45. VM10 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 UTLY 6.0BAR line vent NIL 46. VM11 15 Reduced bore Flanged/ Threaded 6 PN50 UVGPU I/L NIL 47. VM12 15 Full bore Flanged/ Threaded 6 PN50 UGPR I/L NIL 48. VM13 15 Reduced bore Flanged/ Threaded 6 PN50 UGPR line vent NIL 49. VM14 15 Reduced bore Flanged/ Threaded 6 PN50 UVGPO I/L NIL



Sr.No TAG NO

Size (DN)


both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

50. VM15 15 Reduced bore Threaded 240 PN420 UFPPG NIL GHE:EVU-03

51. VM16 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar I/L NIL 52. VM17 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar line vent NIL 53. VM18 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar I/L NIL 54. VM19 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar line vent NIL

GN2:EVU-04PP 55. VM01 15 Full bore Flanged/ Threaded 8 PN50 EP Valve CMD I/L NIL 56. VM02 15 Reduced bore Flanged/ Threaded 8 PN50 EP Valve CMD line vent NIL 57. VM03 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar I/L NIL 58. VM04 15 Reduced bore Flanged/ Threaded 40 PN50 GN2 Utility 40.0bar line vent NIL 59. VM05 15 Full bore Flanged/ Threaded 28 PN50 RCHNGYP I/L NIL 60. VM06 15 Full bore Flanged/ Threaded 28 PN50 SCHNGYP I/L NIL 61. VM07 15 Full bore Flanged/ Threaded 28 PN50 PV3-N I/L NIL 62. VM08 15 Reduced bore Threaded 400 PN420 RHNG I/L NIL 63. VM09 15 Reduced bore Flanged/ Threaded 6 PN50 N PURGE I/L NIL 64. VM10 15 Reduced bore Flanged/ Threaded 6 PN50 N purge line vent NIL 65. VM11 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 Utility 6.0bar I/L NIL 66. VM12 15 Reduced bore Flanged/ Threaded 6 PN50 GN2 Utility 6.0bar line veNT NIL 67. VM13 15 Reduced bore Flanged/ Threaded 13.5 PN50 RNNG I/L NIL 68. VM14 15 Full bore Flanged/ Threaded 8 PN50 MLP EP Valve CMD Suply I/L NIL 69. VM15 15 Reduced bore Flanged/ Threaded 8 PN50 MLP EP CMD SPLY line vent NIL

GN2:EVU-04PM 70. VM16 15 Full bore Flanged/ Threaded 8 PN50 EP Valve CMD I/L NIL 71. VM17 15 Reduced bore Flanged/ Threaded 8 PN50 EP Valve CMD line vent NIL 72. VM18 15 Full bore Flanged/ Threaded 28 PN50 RCHNGYM I/L NIL 73. VM19 15 Full bore Flanged/ Threaded 28 PN50 SCHNGYM I/L NIL 74. VM20 15 Full bore Flanged/ Threaded 28 PN50 PV3-U I/L NIL



Sr.No TAG NO

Size (DN)


both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

75. VM21 15 Reduced bore Threaded 100 PN420 SCHNG I/L NIL 76. VM22 15 Reduced bore Threaded 70 PN420 UPSOM I/L NIL 77. VM23 15 Full bore Flanged/ Threaded 6 PN50 U Purge I/L NIL 78. VM24 15 Full bore Flanged/ Threaded 6 PN50 U Purge line vent NIL 79. VM25 15 Full bore Flanged/metric threaded 13.5 PN50 RMNG I/L NIL

GHE :EVU-04PM 80. VM26 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar I/L NIL 81. VM27 15 Reduced bore Flanged/ Threaded 30 PN50 GHE Utility 30.0bar line vent NIL 82. VM28 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar I/L NIL 83. VM29 15 Reduced bore Flanged/ Threaded 6 PN50 GHE Utility 6.0bar line vent NIL

GN2:PRU-601 84. VM01 15 Full bore Flanged/metric threaded 400 PN420 PRU-601 Inlet NIL 85. VM02 15 Reduced bore Threaded 400 PN420 PRU-601 I/L line vent NIL 86. VM03 15 Full bore Flanged/ Threaded 40 PN50 PRU-601 O/L line vent NIL 87. VM04 25 Full bore Flanged/ Threaded 40 PN50 PRU-601 outlet NIL

GN2 :PRU-602 88. VM01 15 Full bore Flanged/metric threaded 400 PN420 PRU-602 Inlet NIL 89. VM02 15 Reduced bore Threaded 400 PN420 PRU-602 I/L line vent NIL 90. VM03 15 Full bore Flanged/ Threaded 40 PN50 PRU-602 O/L line vent NIL 91. VM04 40 Full bore Flanged/ Threaded 40 PN50 PRU-602 outlet NIL

GN2:PRU-603 92. VM01 25 Full bore Flanged/ Threaded 40 PN50 PRU-603 Inlet NIL 93. VM02 15 Reduced bore Flanged/ Threaded 40 PN50 PRU-603 I/L line vent NIL 94. VM03 15 Full bore Flanged/ Threaded 13.5 PN50 PRU-603 O/L line vent NIL 95. VM04 25 Full bore Flanged/ Threaded 13.5 PN50 PRU-603 outlet NIL

GN2 :PRU-604 96. VM01 25 Full bore Flanged/ Threaded 40 PN50 PRU-604 I/L NIL 97. VM02 15 Reduced bore Flanged/ Threaded 40 PN50 PRU-604 I/L line vent NIL



Sr.No TAG NO

Size (DN)


both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

98. VM03 15 Full bore Flanged/ Threaded 8 PN50 PRU-604 O/L line vent NIL 99. VM04 40 Full bore Flanged/ Threaded 8 PN50 PRU-604 outlet NIL

GN2 :PRU-605 100. VM01 25 Full bore Flanged/ Threaded 40 PN50 PRU-605 Inlet NIL 101. VM02 15 Reduced bore Flanged/ Threaded 40 PN50 PRU-605 I/L line vent NIL 102. VM03 15 Full bore Flanged/ Threaded 6 PN50 PRU-605 O/L line vent NIL 103. VM04 40 Full bore Flanged/ Threaded 6 PN50 PRU-605 outlet NIL

GN2 :PRU-606 104. VM01 15 Reduced bore Threaded 400 PN420 PRU-606 Inlet NIL 105. VM02 15 Reduced bore Threaded 400 PN420 PRU-606 I/L line vent NIL 106. VM03 15 Reduced bore Threaded 240 PN420 PRU-606 O/L line vent NIL 107. VM04 15 Reduced bore Threaded 240 PN420 PRU-606 outlet NIL

GN2 :PRU-607 108. VM01 15 Full bore Threaded 400 PN420 PRU-607 inlet NIL 109. VM02 15 Reduced bore Threaded 400 PN420 PRU-607 I/L line vent NIL 110. VM03 15 Reduced bore Threaded 100 PN420 PRU-607 O/L line vent NIL 111. VM04 15 Full bore Threaded 100 PN420 PRU-607 outlet NIL

GN2 :PRU-608 112. VM01 15 Reduced bore Threaded 400 PN420 PRU-608 Inlet NIL 113. VM02 15 Reduced bore Threaded 400 PN420 PRU-608 I/L line vent NIL 114. VM03 15 Reduced bore Threaded 70 PN420 PRU-608 O/L line vent NIL 115. VM04 15 Reduced bore Threaded 70 PN420 PRU-608 outlet NIL

GN2 :NDU-601 116. VM01 15 Reduced bore Threaded 400 PN420 NDU-601 inlet NIL 117. VM02 15 Reduced bore Threaded 400 PN420 NDU-601 I/L line vent NIL

GN2 :HDU-501 118. VM01 15 Reduced bore Threaded 400 PN420 HDU-501 inlet NIL 119. VM02 15 Reduced bore Threaded 400 PN420 HDU-501 I/L line vent NIL



Sr.No TAG NO

Size (DN)


both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

GN2 :VB-601

120. VM01 15 Full bore Threaded 400 PN420 VB-601 Inlet NIL

121. VM02 15 Full bore Threaded 400 PN420 VB-601 outlet NIL 122. VM03 15 Reduced bore Threaded 400 PN420 VB-601 O/L line vent NIL

GHE:VB-501 123. VM01 15 Full bore Threaded 400 PN420 VB-501 Inlet NIL 124. VM02 15 Full bore Threaded 400 PN420 VB-501 Outlet NIL 125. VM03 15 Reduced bore Threaded 400 PN420 VB-501 O/L line vent NIL

GHE:VB-502 126. VM01 15 Threaded Threaded 400 PN420 VB-502 Inlet NIL 127. VM02 15 Reduced bore Threaded 400 PN420 VB-502 Outlet NIL 128. VM03 15 Reduced bore Threaded 400 PN420 VB-502 O/L line vent NIL

GN2 :VB-602 129. VM01 15 Threaded Threaded 240 PN420 VB-602 I/L NIL



GHE:HDU-502 132. VM01 15 Full bore Threaded 400 PN420 HDU-502 inlet NIL 133. VM02 15 Reduced bore Threaded 400 PN420 HDU-502 I/L line vent NIL 134. VM03 15 Reduced bore Flanged /Threaded 30 PN50 HDU-502 O/L line vent NIL 135. VM04 15 Full bore Flanged /Threaded 30 PN50 HDU-502 Outlet NIL

GHE:HDU-503 136. VM01 15 Full bore Flanged /Threaded 30 PN50 HDU-503 Inlet NIL 137. VM02 15 Reduced bore Flanged /Threaded 30 PN50 HDU-503 I/L line vent NIL 138. VM03 15 Reduced bore Flanged /Threaded 6 PN50 HDU-503 O/L line vent NIL 139. VM04 15 Full bore Flanged /Threaded 6 PN50 HDU-503 outlet NIL



Sr.No TAG NO

Size (DN)


both ends

MOP Bar (a)

(PN) Rating Bar

Purpose Remarks

GHE:HRU-501 140. VM01 15 Reduced bore Threaded 400 PN420 HRU-501 inlet NIL 141. VM02 15 Reduced bore Threaded 400 PN420 HRU-501 outlet NIL

All threaded valves shall be of but weld union type with metric /BSSP Threaded only (No NPT is allowed )

Table 10: List of Filters

Sr.No Tag No

Purpose Element MOP Bar (a)

Micron Rating (abs)

Body Size (DN)

End connection

Filter model number

GN2:EVU-01

1. FL01 EP Valve Command Inlet Mesh 8 20 Stainless steel/Brass 15 Threaded FLM04

2. FL02 GN2 Utility -40BAR Inlet Mesh 40 20 Stainless steel/Brass 15 Threaded FLM04

3. FL03 GN2 Utility -40BAR terminal Mesh 40 10 Stainless steel/Brass 15 Threaded FLM04

4. FL04 Inlet to UCEVV/UGTV/UCHFV Mesh 28 10 Stainless steel/Brass 25 Threaded FLM03

5. FL05 UCEVV/UGTV terminal Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

6. FL06 UCHFV terminal Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

7. FL07 Inlet to UPVFM/UPVFN Mesh 13.5 20 Stainless steel/Brass 25 Threaded FLM03

8. FL08 UPVFM terminal Mesh 13.5 10 Stainless steel/Brass 15 Threaded FLM04

9. FL09 UPVFN terminal Mesh 13.5 10 Stainless steel/Brass 15 Threaded FLM04

10. FL10 Inlet to UGPM/UGPN/Utility Mesh 6 20 Stainless steel/Brass 15 Threaded FLM03

11. FL11 UGPM terminal Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

12. FL12 UGPN terminal Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

13. FL13 GN2 Utility 6 bar terminal Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

GHE:EVU-01



Sr.No Tag No


Micron Rating (abs)

Body Size (DN)

End connection

Filter model number

14. FL14 UHFV Inlet Mesh 400 20 Stainless steel 15 Threaded FLM02

15. FL15 UHFV terminal Mesh 400 10 Stainless steel 15 Threaded FLM02

16. FL16 GHE Utility 30bar terminal Mesh 30 10 Stainless steel/Brass 15 Threaded FLM04

17. FL17 GHE Utility 6bar terminal Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

GN2:EVU-02


19. FL02 GN2 Utility -40BAR Inlet Mesh 40 20 Stainless steel/Brass 15 Threaded FLM04

20. FL03 GN2 Utility -40BAR terminal Mesh 40 10 Stainless steel/Brass 15 Threaded FLM04

21. FL04 Inlet to UCVPG/NT/UT/PP /UB/NB/GPN/EVV/UCVFH

Mesh 28 20 Stainless steel/Brass 25 Threaded FLM03

22. FL05 UCVPG/UT/NT Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

23. FL06 UCVPP/UB/NB Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

24. FL07 UCVGPN/UCEVV Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

25. FL08 UCVFH Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

26. FL09 Inlet GN2 Utility6bar/UVGPN Mesh 6 10 Stainless steel/Brass 25 Threaded FLM03

27. FL10 GN2 Utility 6BAR terminal Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

28. FL11 UVGPN Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

GHE:EVU-02

29. FL12 Inlet to UFBH Mesh 400 20 Stainless steel 15 Threaded FLM02

30. FL13 UFBH Mesh 400 10 Stainless steel 15 Threaded FLM02

31. FL14 GHE UTILITY 30.0BAR Mesh 30 10 Stainless steel/Brass 15 Threaded FLM04


GN2 :EVU-03




Sr.No Tag No


Micron Rating (abs)

Body Size (DN)

End connection

Filter model number

34. FL02 GN2 Utility -40BAR Mesh 40 20 Stainless steel/Brass 15 Threaded FLM04

35. FL03 GN2 Utility -40BAR Mesh 40 10 Stainless steel/Brass 15 Threaded FLM04

36. FL04 Inlet to UCVGPO/GPU/HRCM Mesh 28 20 Stainless steel/Brass 25 Threaded FLM03

37. FL05 UCVGPO Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

38. FL06 UCVGPU Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

39. FL07 HRCM Mesh 28 10 Stainless steel/Brass 25 Threaded FLM03

40. FL08 Inlet to GN2 Utility 6.0bar /UVGPU/UGPR/UVI/UVGPO

Mesh 6 20 Stainless steel/Brass 25 Threaded

FLM03

41. FL09 GN2 Utility -6.0BAR Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

42. FL10 UVGPU Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

43. FL11 UGPR Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

44. FL12 UVGPO MESH 6 10 Stainless steel/Brass 15 Threaded FLM04

45. FL13 UFPPG Inlet Mesh 240 20 Stainless steel 15 Threaded FLM02

46. FL14 UFPPG Outlet Mesh 240 10 Stainless steel 15 Threaded FLM02

GHE :EVU-03



GN2 :EVU-04PP


50. FL02 GN2 UTILITY -40BAR Mesh 40 20 Stainless steel/Brass 15 Threaded FLM04

51. FL03 GN2 UTILITY -40BAR Mesh 40 10 Stainless steel/Brass 15 Threaded FLM04

52. FL04 Inlet RCHNGYP/SCHNGYP/PV3 N

Mesh 28 20 Stainless steel/Brass 25 Threaded FLM03

53. FL05 RCHNGYP Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04



Sr.No Tag No


Micron Rating (abs)

Body Size (DN)

End connection

Filter model number

54. FL06 SCHNGYP Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

55. FL07 PV3-N Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

56. FL08 RHNG Inlet Mesh 400 20 Stainless steel 15 Threaded FLM02

57. FL09 RHNG Mesh 400 10 Stainless steel 15 Threaded FLM02

58. FL10 Inlet to N-purge /GN2-6 bar Mesh 6 20 Stainless steel/Brass 25 Threaded FLM03

59. FL11 N-PURGE Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

60. FL12 GN2 UTILITY -6.0BAR Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

61. FL13 Inlet to RNNG Mesh 13.5 20 Stainless steel/Brass 15 Threaded FLM04

62. FL14 RNNG Terminal Mesh 13.5 10 Stainless steel/Brass 15 Threaded FLM04

63. FL15 MLP EP VALVE CMD Supply Mesh 8 20 Stainless steel/Brass 15 Threaded FLM04

GN2:EVU-04PM


65. FL17 RCHNGYM Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

66. FL18 SCHNGYM Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

67. FL19 PV3-U Mesh 28 10 Stainless steel/Brass 15 Threaded FLM04

68. FL20 SHNG Inlet Mesh 100 20 Stainless steel 15 Threaded FLM02

69. FL21 SHNG terminal Mesh 100 10 Stainless steel 15 Threaded FLM02

70. FL22 UPSOM Inlet Mesh 70 20 Stainless steel 15 Threaded FLM02

71. FL23 UPSOM terminal Mesh 70 10 Stainless steel 15 Threaded FLM02

72. FL24 U-PURGE terminal Mesh 6 10 Stainless steel/Brass 15 Threaded FLM04

73. FL25 RMNG Terminal Mesh 13.5 10 Stainless steel/Brass 15 Threaded FLM04

GHE:EVU-04PM





Sr.No Tag No


Micron Rating (abs)

Body Size (DN)

End connection

Filter model number

GN2:PRU-601

76. FL01 PRU 601 I/L Mesh 400 20 Stainless steel 15 Threaded FLM01

77. FL02 PRU 601 O/L Mesh 40 20 Stainless steel/Brass 25 Threaded FLM03

GN2:PRU-602


79. FL02 PRU 602 O/L Mesh 28 20 Stainless steel/Brass 25 threaded FLM03

GN2:PRU-603

80. FL01 PRU 603 I/L Mesh 40 20 Stainless steel/Brass 25 Threaded FLM03

81. FL02 PRU 603 O/L Mesh 13.5 20 Stainless steel/Brass 25 Threaded FLM03

GN2:PRU-604



GN2:PRU-605



GN2:PRU-606


87. FL02 PRU 606 O/L Mesh 240 20 Stainless steel 15 Threaded FLM02

GN2:PRU-607



GN2:PRU-608





Sr.No Tag No


Micron Rating (abs)

Body Size (DN)

End connection

Filter model number

GN2:NDU-601

92. FL01 NDU601 I/L Mesh 400 20 Stainless steel 15 Threaded FLM02

93. FL02 NDU601 O/L Mesh 400 20 Stainless steel 15 Threaded FLM02

GHE:HDU-501

94. FL01 HDU501 I/L Mesh 400 20 Stainless steel 15 Threaded FLM02

95. FL02 HDU501 O/L Mesh 400 20 Stainless steel 15 Threaded FLM02

GHE:HDU-502

96. FL01 HDU502 I/L Mesh 400 20 Stainless steel 15 Threaded FLM02

97. FL02 HDU502 O/L Mesh 30 20 Stainless steel/Brass 15 Threaded FLM04

GHE:HDU-503

98. FL01 HDU503 I/L Mesh 30 20 Stainless steel/Brass 15 Threaded FLM04

99. FL02 HDU503 O/L Mesh 6 20 Stainless steel/Brass 15 Threaded FLM04

GN2:VB-601

100. FL01 VB-601 I/L Mesh 400 20 Stainless steel 15 Threaded FLM01

GN2:VB-501

101. FL01 VB-501 I/L Mesh 400 20 Stainless steel 15 Threaded FLM02

GN2:VB-502

102. FL01 VB-502 O/L Mesh 400 20 Stainless steel 15 Threaded FLM02

All threaded filter threads (end connection butt weld type & body)shall be of Metric /BSPP only



Table 11: List of Check Valves

Sr.No Tag No Line pressure Bar(a) Line

size(NB) Type of End Connection

Flow rate (NM3/Hr)

Pressure Drop (Bar) Min. Max.

01 VC1 –PRU601 36 40 25 Threaded 1000 0.2-0.5

02 VC2 –PRU601 36 40 25 Threaded 1000 0.2-0.5

03 VC1 –PRU602 25 28 40 Flanged 1270 0.2-0.5

04 VC2 –PRU602 25 28 40 Flanged 1270 0.2-0.5

05 VC1 –PRU603 10 13.5 25 Threaded 240 0.2-0.5

06 VC2 –PRU603 10 13.5 25 Threaded 240 0.2-0.5

07 VC1 –PRU604 7 8 40 Flanged 800 0.2-0.5

08 VC2 –PRU604 7 8 40 Flanged 800 0.2-0.5

09 VC1 –PRU605 5 6 40 Flanged 500 0.2-0.5

10 VC2 –PRU605 5 6 40 Flanged 500 0.2-0.5

11 VC1 –PRU606 230 240 15 Threaded 50 0.5-1.5

12 VC1 –PRU606 230 240 15 Threaded 50 0.5-1.5

13 VC1 –PRU607 98 100 15 Threaded 400 0.5-1.5

14 VC1 –PRU607 98 100 15 Threaded 400 0.5-1.5

15 VC1 –PRU608 67 70 15 Threaded 50 0.5-1.5

16 VC1 –PRU608 67 70 15 Threaded 50 0.5-1.5

All threaded check valves shall be of metric /BSPP only



Table 12: List of Pressure Gauges

Sr.No Tag No MOP

bar(a)

Range

bar(g)

Accuracy

Class Purpose Dial End Connection Remarks

GN2:(EVU-01 )

1. PI01 40 0-60 0.5 GN2 Utility 40.0BAR 100 M20X1.5 or 1/2”BSPP Nil

2. PI02 10 0-15 0.5 UPVFM 100 M20X1.5 or 1/2”BSPP Nil

3. PI03 10 0-15 0.5 UPVFN 100 M20X1.5 or 1/2”BSPP Nil


GHE:(EVU-01 )

5. PI05 30 0-45 0.5 GHE Utility 30.0BAR 200 M20X1.5 or 1/2”BSPP Nil


GN2:(EVU-02 )



GHE:(EVU-02 )



GN2:(EVU-03 )



13. PI03 6 0-10 0.5 UGPR/UVI 100 M20X1.5 or 1/2”BSPP Nil

GN2:(EVU-03 )



GN2:(EVU-04PP )


17. PI02 6 0-10 0.5 N Purge 200 M20X1.5 or 1/2”BSPP Nil




Sr.No Tag No MOP

bar(a)

Range

bar(g)

Accuracy


19. PI04 8 0-15 0.5 MLP EP Valve CMD 200 M20X1.5 or 1/2”BSPP Nil

GN2:(EVU-04PM)

20. PI05 6 0-10 0.5 U PURGE 200 M20X1.5 or 1/2”BSPP Nil



GN2:(PRU-601)

23. PI 01 400 0-600 0.5 PRU-601 I/L 200 M20X1.5 or 1/2”BSPP Nil

24. PI 02 40 0-60 0.5 PRU-601 O/L Path1 200 M20X1.5 or 1/2”BSPP Nil


GN2:(PRU-602)




GN2:(PRU-603)


30. PI 02 13.5 0-25 0.5 PRU-603 O/L Path1 200 M20X1.5 or 1/2”BSPP Nil

31. PI 03 13.5 0-25 0.5 PRU-603 O/L Path2 200 M20X1.5 or 1/2”BSPP Nil

GN2:(PRU-604)




GN2:(PRU-605)




GN2:(PRU-606)



Sr.No Tag No MOP

bar(a)

Range

bar(g)

Accuracy





GN2:(PRU-607)




GN2:(PRU-608)

44. PI 01 400 0-600 0.5 PRU-608 PI I/L 200 M20X1.5 or 1/2”BSPP Nil



GHE:(HDU-502)

47. PI 01 400 0-600 0.5 HDU-502 PI I/L 200 M20X1.5 or 1/2”BSPP Nil

48. PI 02 30 0-45 0.5 HDU-502 PI O/L 200 M20X1.5 or 1/2”BSPP Nil

GHE:(HDU-503)

49. PI 01 30 0-45 0.5 HDU-503 PI I/L 200 M20X1.5 or 1/2”BSPP Nil

50. PI 02 6 0-10 0.5 HDU-503 PI O/L 200 M20X1.5 or 1/2”BSPP Nil

GN2:(VB-601)

51. PI 01 400 0-600 0.5 VB-601 I/L 200 M20X1.5 or 1/2”BSPP Nil

GHE:(VB-501)

52. PI 01 400 0-600 0.5 VB-501 I/L 200 M20X1.5 or 1/2”BSPP Nil

GHE:(VB-502)

53. PI 01 400 0-600 0.5 VB-502 O/L 200 M20X1.5 or 1/2”BSPP Nil



Table 13: List of Pressure Transmitter

SR.NO TAG NO Service Equipment Entry MOP

bar(a)

End Connection

Size/Type

Range

bar(a) Remarks

GN2:(EVU-01 )

1. PT01 UGPM EVU-01 BOTTOM 6 M20X1.5/1/2"NPT 0-50 NIL

2. PT02 UGPN EVU-01 BOTTOM 6 M20X1.5/1/2"NPT 0-50 NIL

GHE:(EVU-01 )

3. PT03 UHFV-PT501 EVU-01 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

4. PT04 UHFV-PT502 EVU-01 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

GN2:(EVU-02)

5. PT01 UVGPN EVU-02 BOTTOM 6 M20X1.5/1/2"NPT 0-50 NIL

GHE:(EVU-02)

6. PT02 UFBH-PT503 EVU-02 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

GN2:(EVU-03 )

7. PT01 HRCM EVU-03 BOTTOM 28 M20X1.5/1/2"NPT 0-50 NIL

8. PT02 UVGPU EVU-03 BOTTOM 6 M20X1.5/1/2"NPT 0-50 NIL

9. PT03 UVGPO EVU-03 BOTTOM 6 M20X1.5/1/2"NPT 0-50 NIL

10. PT04 UFPPG EVU-03 BOTTOM 240 M20X1.5/1/2"NPT 0-600 NIL

11. PT05 UFPPG EVU-03 Bottom 240 M20X1.5/1/2"NPT 0-600 NIL

GN2:(EVU-04PP )

12. PT01 RHNG EVU-04 PP Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

13. PT02 RHNG EVU-04 PP Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

14. PT03 RNNG EVU-04 PP Bottom 13.5 M20X1.5/1/2"NPT 0-50 NIL

GN2:(EVU-04PM )

15. PT04 SHNG EVU-04 PM Bottom 100 M20X1.5/1/2"NPT 0-600 NIL

16. PT05 SHNG EVU-04 PM Bottom 100 M20X1.5/1/2"NPT 0-600 NIL

17. PT06 UPSOM EVU-04 PM Bottom 70 M20X1.5/1/2"NPT 0-600 NIL

18. PT07 UPSOM EVU-04 PM Bottom 70 M20X1.5/1/2"NPT 0-600 NIL



SR.NO TAG NO Service Equipment Entry MOP

bar(a)

End Connection

Size/Type

Range

bar(a) Remarks

19. PT08 RMNG EVU-04 PM Bottom 13.5 M20X1.5/1/2"NPT 0-50 NIL

GN2:(PRU-601 TO 608 )

20. PT01 PRU-601 PT 01O/L PRU-601 Bottom 40 M20X1.5/1/2"NPT 0-50 NIL


22. PT01 PRU-603 PT 01O/L PRU-603 Bottom 13.5 M20X1.5/1/2"NPT 0-50 NIL






GN2:(NDU-601)

28. PT01 NDU-01 PT 01 I/L NDU-01 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

GHE:(HDU-501)

29. PT01 HDU-501 PT 01 I/L HDU-501 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

GHE:(HRU-501)

30. PT01 HRU-501 PT 01 I/L HRU-501 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

31. PT02 HRU-501 PT 02O/L HRU-501 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

GHE:(HDU-502)

32. PT01 HDU-502 PT 01O/L HDU-502 Bottom 30 M20X1.5/1/2"NPT 0-50 NIL

GHE:(HDU-503)

33. PT01 HDU-503 PT 01O/L HDU-503 Bottom 6 M20X1.5/1/2"NPT 0-50 NIL

GN2:(VB-601)

34. PT01 VB-601 PT01 I/L VB-601 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL

GHE:(VB-501)

35. PT01 VB-501 PT01 I/L VB-501 Bottom 400 M20X1.5/1/2"NPT 0-600 NIL



Table 14: List of Gauge Shut off Valves

Sr.No Tag No Service EVU/PRU TYPE MOP Bar(a)

Size

(PN) Rating

Remarks

GN2:EVU-01

1. VGS01 GN2 Utility 40.0BAR –PI01 EVU-01 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 2. VGS02 UPVFM -PI02 EVU-01 Needle 10 M20X1.5 or ½ “ BSPP 420 NIL 3. VGS03 UPVFN -PI03 EVU-01 Needle 10 M20X1.5 or ½ “ BSPP 420 NIL 4. VGS04 UGPM -PT01 EVU-01 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 5. VGS05 UGPN-PT02 EVU-01 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 6. VGS06 GN2 Utility 6.0BAR -PI04 EVU-01 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GHE:EVU-01 7. VGS07 UHFV-PT03 EVU-01 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 8. VGS08 UHFV-PT04 EVU-01 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 9. VGS09 GHE Utility30.0BAR –PI05 EVU-01 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL 10. VGS10 GHE Utility 30.0BAR –PI06 EVU-01 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GN2:EVU-02 11. VGS01 GN2 Utility 40.0BAR –PI01 EVU-02 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 12. VGS02 GN2 Utility 6.0BAR –PI02 EVU-02 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 13. VGS03 UVGPN –PT01 EVU-02 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GHE:EVU-02 14. VGS04 UFBH-PT02 EVU-02 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 15. VGS05 GHE Utility 30.0BAR -PI03 EVU-02 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL 16. VGS06 GHE Utility6.0BAR -PI04 EVU-02 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GN2:EVU-03 17. VGS01 GN2 Utility 40.0BAR –PI01 EVU-03 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 18. VGS02 HRCM –PT01 EVU-03 Needle 28 M20X1.5 or ½ “ BSPP 420 NIL 19. VGS03 GN2 Utility 6.0BAR –PI02 EVU-03 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 20. VGS04 UVGPU –PT04 EVU-03 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 21. VGS05 UGPR-PI05 EVU-03 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL




Size

(PN) Rating

Remarks

22. VGS06 UVGPO-PT06 EVU-03 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 23. VGS07 UFPPG-PT04 EVU-03 Needle 240 M20X1.5 or ½ “ BSPP 420 NIL 24. VGS08 UFPPG-PT05 EVU-03 Needle 240 M20X1.5 or ½ “ BSPP 420 NIL

GN2:EVU-03 25. VGS09 GHE Utility 30.0BAR –PI04 EVU-03 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL 26. VGS10 GHE Utility 6.0BAR –PI05 EVU-03 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GN2:EVU-04PP 27. VGS01 GN2 Utility 40.0BAR -PI01 EVU-04 PP Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 28. VGS02 RHNG-PT01 EVU-04 PP Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 29. VGS03 RHNG-PT02 EVU-04 PP Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 30. VGS04 N Purge–PI02 EVU-04 PP Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 31. VGS05 GN2 Utility 6.0BAR –PI03 EVU-04 PP Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 32. VGS06 RNNG-PT03 EVU-04 PP Needle 13.5 M20X1.5 or ½ “ BSPP 420 NIL 33. VGS07 MLP EP Valve CMD-PI04 EVU-04 PP Needle 8 M20X1.5 or ½ “ BSPP 420 NIL

GN2:EVU-04PM 34. VGS08 SHNG-PT04 EVU-04 PM Needle 100 M20X1.5 or ½ “ BSPP 420 NIL 35. VGS09 SHNG-PT05 EVU-04 PM Needle 100 M20X1.5 or ½ “ BSPP 420 NIL 36. VGS10 UPSOM-PT06 EVU-04 PM Needle 70 M20X1.5 or ½ “ BSPP 420 NIL 37. VGS11 UPSOM-PT07 EVU-04 PM Needle 70 M20X1.5 or ½ “ BSPP 420 NIL 38. VGS12 U PURGE –PI05 EVU-04 PM Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 39. VGS13 RMNG-PT05 EVU-04 PM Needle 13.5 M20X1.5 or ½ “ BSPP 420 NIL

GHE:EVU-04PM 40. VGS14 GHE Utility 30.0BAR –PI06 EVU-04 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL 41. VGS15 GHE Utility 6.0BAR –PI07 EVU-04 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GN2:PRU-601 42. VGS01 PRU-601 PI 01 I/L PRU-601 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 43. VGS02 PRU-601 PI 02 O/L PRU-601 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 44. VGS03 PRU-601 PI 03 O/L PRU-601 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL




Size

(PN) Rating

Remarks

VGS04 PRU-601 PT 01 O/L PRU-601 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL GN2:PRU-602

45. VGS01 PRU-602 PI 01 I/L PRU-602 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 46. VGS02 PRU-602 PI 02 O/L PRU-602 Needle 28 M20X1.5 or ½ “ BSPP 420 NIL 47. VGS03 PRU-602 PI 03 O/L PRU-602 Needle 28 M20X1.5 or ½ “ BSPP 420 NIL 48. VGS04 PRU-602 PT 01 O/L PRU-602 Needle 28 M20X1.5 or ½ “ BSPP 420 NIL

GN2:PRU-603 49. VGS01 PRU-603 PI 01 I/L PRU-603 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 50. VGS02 PRU-603 PI 02 O/L PRU-603 Needle 13.5 M20X1.5 or ½ “ BSPP 420 NIL 51. VGS03 PRU-603 PI 03 O/L PRU-603 Needle 13.5 M20X1.5 or ½ “ BSPP 420 NIL 52. VGS04 PRU-603 PT 01 O/L PRU-603 Needle 13.5 M20X1.5 or ½ “ BSPP 420 NIL

GN2:PRU-604 53. VGS01 PRU-604 PI 01 I/L PRU-604 Needle 40 M20X1.5 or ½ “ BSPP 420 NIL 54. VGS02 PRU-604 PI 02 O/L PRU-604 Needle 8 M20X1.5 or ½ “ BSPP 420 NIL 55. VGS03 PRU-604 PI 03 O/L PRU-604 Needle 8 M20X1.5 or ½ “ BSPP 420 NIL 56. VGS04 PRU-604 PT 01 O/L PRU-604 Needle 8 M20X1.5 or ½ “ BSPP 420 NIL



GN2:PRU-607 65. VGS01 PRU-607 PI 01 I/L PRU-607 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL




Size

(PN) Rating

Remarks

66. VGS02 PRU-607 PI 02 O/L PRU-607 Needle 100 M20X1.5 or ½ “ BSPP 420 NIL 67. VGS03 PRU-607 PI 03 O/L PRU-607 Needle 100 M20X1.5 or ½ “ BSPP 420 NIL 68. VGS04 PRU-607 PT 01 O/L PRU-607 Needle 100 M20X1.5 or ½ “ BSPP 420 NIL


GN2:NDU-601 73. VGS01 NDU-601 PT 01 I/L NDU-601 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL

GHE:HDU-501 74. VGS01 HDU-501 PT 01 I/L HDU-501 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL

GHE:HRU-501 75. VGS01 HRU-501 PT 01 I/L HRU-501 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 76. VGS02 HRU-501 PT 02 O/L HRU-501 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL

GHE:HDU-502 77. VGS01 HDU-502 PI 01 I/L HDU-502 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 78. VGS02 HDU-502 PI 02 O/L HDU-502 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL 79. VGS03 HDU-502 PT 01 O/L HDU-502 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL

GHE:HDU-503 80. VGS01 HDU-503 PI 01 I/L HDU-503 Needle 30 M20X1.5 or ½ “ BSPP 420 NIL 81. VGS02 HDU-503 PI 02 O/L HDU-503 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL 82. VGS03 HDU-503 PT 01 O/L HDU-503 Needle 6 M20X1.5 or ½ “ BSPP 420 NIL

GN2:VB-601 83. VGS01 VB-601 PI01 I/L VB-601 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL 84. VGS02 VB-601 PT01 I/L VB-601 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL

GHE:VB-501 85. VGS01 VB-501 PI01 I/L VB-501 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL




Size

(PN) Rating

Remarks

VGS02 VB-501 PT01 I/L VB-501 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL GHE:VB-502

VGS01 VB-502 PI01 I/L VB-502 Needle 400 M20X1.5 or ½ “ BSPP 420 NIL

PIF GAS SERVICING SYSTEMS (SECTION-B) P a g e | 83


9 Schedule of Equipment & Price Bid Format:

The scope of supply includes design, procurement of flow components and

instruments, fabrication, assembly, testing and Delivery of the following

pneumatic equipment.

Sl. No

Description Equipment

Tag

Drawing No.

Quantity

(Nos)

Unit Price (Rs.)

1. Pressure Regulation Unit PRU-601 Figure-1 1

Do not fill th

e equipment c

ost h

ere








9. Nitrogen Distribution Unit NDU-601 Figure-9 1

10. Helium Distribution Unit HDU-501 Figure-10 1



13. Helium Distribution Unit HRU-501 Figure-13 1

14. End Valve Unit EVU-01 Figure-14 1



17. End Valve Unit(PP+PM) EVU-04 Figure-17

a & b 1

18. Valve Block VB-601 Figure-18 1




PIF GAS SERVICING SYSTEMS (SECTION-B) P a g e | 84




24. 10%Spare valves (*) Na Na Na ----

25. GST (As applicable) Na Na Na ---%

Note: “*” List of spare shall be provided in technical bid Based on the

models selected to supply

10 Sequence and Schedule of Activities The sequence of activities and their detailed schedule is as given in Table 15. The

selection and procurement action for the flow components and piping elements

like Electro Pneumatic, manual valves, filters and pipes and piping elements shall

start after the PO release in parallel with serial 8.2 as given in the table below.

Table 15: Time Line of activities for supply of Equipment

Sr.No Description of the

activity

Time Line

(T+Days)

Duration

(Days)

Suppler’s

schedule

8.1 PO Release as Start of T T+0 0

Schedule prepared by th

e suppler(total p

roject

schedule is 8motnts /240 days)

8.2 Submission of Design

Document for review T+30 30

8.3

Design clearance ,Selection

and procurement of flow

components & piping

elements as per the design

document and technical

specifications

T+90 60

8.4

3D Modeling of the

Equipments& Engineering

based on flow components

selected

T+110 20

8.5

Fabrication ,assembly &

testing of equipment &

Delivery

T+110 to

240 130

8.5.1 Valve Boxes -6Nos T+130 20

8.5.2

Pressure Regulations units,

Distribution Units& Recovery

Units (14Nos)

T+180 50

8.5.3 End Valve Units (4Nos) T+240 60

PIF GAS SERVICING SYSTEMS(SECTION-B) P a g e | 85


11 Summary of Flow components

Sr.No Equipment VM VP FL PI PS PT SOV VS PR VGS VC

01 PRU-601 04 04 02 03 00 01 04 02 02 04 02

02 PRU-602 04 04 02 03 00 01 04 02 02 04 02

03 PRU-603 04 05 02 03 00 01 05 02 02 04 02

04 PRU-604 04 04 02 03 00 01 04 02 02 04 02

05 PRU-605 04 05 02 03 00 01 05 02 02 04 02

06 PRU-606 04 04 02 03 00 01 04 02 02 04 02

07 PRU-607 04 04 02 03 00 01 04 02 02 04 02

08 PRU-608 04 04 02 03 00 01 04 02 02 04 02

09 NDU-601 02 03 02 00 00 01 03 00 00 01 00

10 HDU-501 02 03 02 00 00 01 03 00 00 01 00

11 HDU-502 04 00 02 02 00 01 00 01 01 03 00

12 HDU-503 04 00 02 02 00 01 00 01 01 03 00

13 HRU-501 02 03 00 00 00 02 03 00 00 02 00

14 VB-601 03 00 01 01 00 01 00 00 00 02 00

15 VB-602 01 03 00 00 00 00 03 00 00 00 00

16 VB-603 01 03 00 00 00 00 03 00 00 00 00

17 VB-604 01 03 00 00 00 00 03 00 00 00 00

18 VB-501 03 00 01 01 00 01 00 00 00 02 00

19 VB-502 03 00 01 01 00 00 00 00 00 01 00

20 EVU-01 19 10 17 06 02 04 10 00 00 10 00

21 EVU-02 16 11 15 04 04 02 11 00 00 06 00

22 EVU-03 19 12 16 05 02 05 12 00 00 10 00

23 EVU-04PP 15 10 15 04 03 03 10 00 00 07 00

24 EVU-04PM 14 13 12 03 03 05 13 00 00 08 00

Total (Nos) 141 108 102 53 14 35 108 18 18 88 16



12 Quality Assurance Plan (QAP)

Sr.No Characteristics/Type of Check Characteristics of

Check Acceptance Norms

Quantum of Check

ISRO MFR TPI

1. Review of fabrication drawings and Design Calculations of flow components

Design Verification

As per ANSI 31.3 process Piping design & As approved procedure from manufacturer /standards

100%R 100%H 100%H

2. Raw Material Identification (pipes, tubes, machined fittings, and pipe fittings)

Dimensions, Chemical & Mechanical certificates review

As per Standards of pipe, tube and forged bar stock

100 %R 100%H 100%H

3. Review of specifications of Flow components like Manual Valves, EP valves, SRVs, Pressure Regulators, filters etc., and instruments.

Review and finalization of specifications.

As per codes /standards and manufacturer’s stds

100%R 100%H 100%H

4. Inspection flow of components like (Pressure regulators ,safety relief valves EP Valves ,manual valves ,filters ,check valves etc.

Review of material test certificates and witnessing performance tests

As per finalized specification of flow components and tests procedures and standards

100%R&W 100%H 100%H

5. Welding procedure & Qualification of welder Qualification of welders& equipments

ASME SEC IX 100%R 100%H 100%H

6. Pipe Fitting & Welding Inspection Visual inspection As per Standard 100%R 100%H 100%H

7. NDT after Welding Radiography Film Evaluation/DP testing

ASME SEC VIII DIV-1, UW-51 & SECV article 2

100%R 100%H 100%H

8. Final Dimensions & visual inspection of equipment

Dimensions & visual As per modeled drawings 100%W 100%H 100%H

9. Hydro Testing of equipment with DM Water Strength testing of the weld joints with DM water at 1.5 time MOP

No pressure drop for 10min

100%W 100%H 100%H

10. Drying of the equipment with Dry nitrogen gas

Purging of the lines to achieve required dryness

As per finalized procedure (moisture <10ppm)

100% W/R

100%H 100%H

11. Pneumatic Testing of integrated equipment with GN2

Check for proof tightening of the joints at MOP

No leak from the joints using snoop

100%W 100%H 100%H

12. Cleaning of pipe lines with IPA Cleaning of the pipe line and spools for

As approved procedure 100% W/R

100%H 100%H





Quantum of Check

ISRO MFR TPI

cleanliness

13. Assembly of piping spools inside the cabinet and Pneumatic testing of integrated equipment with GN2

As per drawings As per P&ID drawings 100% W/R

100%H 100%H

14. Cleanliness check of pipe line termination with banain cloth

As per approved procedure

No visible particles /discoloration in the banian clothe

100%W 100%H 100%H

15. Functional Testing of equipment Functional checking of valves & elements

As per approved specification each flow components

100%W 100%H 100%H

16.

Measuring instruments: Pressure Transmitters

1. Make ,model and range As per specifications

As per finalized model number and specifications

100% Verification

100% Certification

---- 2.Calibration ---- 3.Certification ---- 4. Accuracy & Material Compatibility As per desired

specification As per process requirements

----

5.Material compatibility 100%

certification Verification

For each models

---- 6.Confirmity of model number

As per desired specification

Verification of manufacturer’s conformity certificate

7.Process and electrical end connections As per desired specification

By verification using thread gauge

Physical verification

----

17.

Solenoid Valves


As per process requirements

100% Verification

& certification

100% Verification

Of certification

1.Physical Verification, make & Model ----

3.Coil resistance, IR & checking of main and redundant coils

----

5.Test certificates ---- 6.Functional checks ----

7.Nominal Voltage checks ---- 8.SOV Body Joint leak checks ---- 9.Performance Evaluation (100000 cycles of operation

----

18. Pressure Switches


As per process requirements

100% Verification

&

100% Verification

Of

---- 1.Physical Verification, make & model ---- 2. Snap acting SPDT Micro Switch ----





Quantum of Check

ISRO MFR TPI

3.Rpeatability checks certification certification ---- 4.Test certificates ---- 5.Functional checks ---

19.

Final documentation • Test certificates of all flow

components • 3d modeling hard & soft copies • Weld Joint history reports • Hydro test reports of all equipment • Pneumatic tests reports • IPA cleanliness report of all pipe lits • Functional check reports of

equipment with pressure switches • Report for Cleanliness check of all

pipe termination

Verification of final documents before dispatch

As per approved spefications and procedure

100% R

100% H

100% H

20. Name plates and P&ID drawings all equipment (chemically /laser itched )

Verification as per P&ID And

As per no of equipment and P&ID

100% R

100% H

100% H

DRAWINGS

SECTION C:

ANNEXURE(S)

PIF GAS SERVICING SYSTEMS(SECTION-C) P a g e | 1


Annexure-1

1 Schedule of Prices & General Particulars

1. Bidders shall not alter the contents of this schedule of prices. If the bidder wants any additions / alterations, these shall be brought out separately in

the format as given in this schedule of prices.

2. Pneumatic equipments are to be supplied in accordance with requirements

stated in the various sections of this specification.

3. The quantities indicated are required for commissioning of new systems. In

case there is any variation in the quantities of flow components actually mentioned supplied from the ordered quantities, the cost of the same will

not be paid as extra. However, party shall consider the variation in the flow components quantity of shall be within +/- 10% of the quantity.

(A)Un priced Schedule of Unit Price (Prices column to be kept blank)

Sr. No. Item Qty. Cost in

1.

As per equipment mentioned in section

B i.e. schedule of equipment & price bid

format Sl.No 9. (Cost of equipment

shall be inclusive of all flow

components, instruments, & their

testing, fabrication, testing (TPI),

packing, transportation and any

other charges not mentioned above)

23Nos To be quoted

in price bid

only

2. Spare flow components (10% per model number)

3. GST as applicable on above items. ------% only

Total Cost (Rs): To be quoted in price

bid only

SIGNATURE

SEAL OF THE COMPANY NAME

DESIGNATION

DATE



Annexure-2

2 Bid Qualification Criteria for Supply of Pneumatic Equipment

Bidders who are qualifying / meeting following Technical and financial criteria are

eligible to participate in the bid for supply of items. Bidder shall furnish all the

information mentioned in the criteria with documentary proof and submit along

with quotation. Bids of the parties which are not meeting the following criteria will

not be considered for evaluation and will be rejected without seeking any further

clarifications.

2.1 Technical Qualification Requirements:

The bidder shall meet the technical specification and other requirements and shall

submit relevant certificates to establish his credentials.

**The Bidder shall have the experience in executing similar

projects like Pneumatic /Hydraulic or any other fluid servicing

equipment.

2.2 Financial Qualification Requirements:

1. The Bidder should have average annual turnover of not less than a value of Rs 960 lakhs per year in the last three financial years ending with

31.03.2018. IT Returns shall be submitted as proof for the same.

2. Single order value of Rs. 640 lakhs or two orders of value Rs. 480 lakhs

each or three orders of value Rs.320 lakhs each or 4 four orders value

greater than Rs.100 lakhs each (sum of value of all four orders shall

be greater than or equal to single order value of 640lakhs) executed

during the last five years ending with 31-12-2018.PO copies shall be

submitted as proof for the above.

3. Shall submit the solvency certificate of Rs.320 lakhs.(Current financial year)

4. IT/ TDS certificate shall be submitted with Loss & Profit for last three years.

5. Bidder shall submit audited Balance sheet of financial status for last three

years.

2.3 The following documents shall be submitted along with the Techno-

commercial bid for prequalification of Bidder.

1. Firm establishment certificate and nature of work.

2. Details of work of similar type completed during the last five years ending with

30.11.2018.

3. Satisfactory work Completion certificates from the clients, with the work order



copies

4. Performance Report of order completed (with years of service) from End

users, with addresses and contact person with phone numbers.

5. Documentary evidence (Technical details &. drawings) for fulfilling special

technical conditions as per the RFP document

6. Copy of audited Balance Sheets for last three years

7. IT / TDS certificates for last three years.

8. List of value, and work order copies of total projects under Execution

with purchase order name and address.

9. Structure and Organization chart.

10. List of personnel with qualification &. Experience in the firm in the areas of

design, production, quality, safety, administration etc.,

11. List of Machinery &Equipment to be used for the work.

2.4 Bid Selection Procedure and Process of Pre-Qualification

1. Short listing based on documents submitted, satisfying all the eligibility

criteria given above by the firm or individual along with their Bid / application.

(Non-submission of any document as given in above list within stipulated time

leads to rejection of Bid).

2. Subsequently Bidder's competency, their technical achievements and financial

status will be evaluated suitable for this work. Feedbacks from Bidder's clients

will be verified, if required.

3. Scrutiny of all technical specification and supply conditions mentioned in

techno-commercial bid.

4. Party evaluation:

a) Visit to manufacturer’s site by our technical team for accessing the

technical capabilities of manufacturer, if required.

b) It is proposed to evaluate the supplier based on the previous experience

in supplying the similar items. The supplier has to furnish/confirm the

details as enclosed in the vendor evaluation format.

c) Evaluation criteria for bidders before opening the price bid:

I. Visiting the suppliers site(if necessary) by a team of experts from

Purchasers end to review documentary details submitted as per

annexure 3 and also to verify the machinery, furnaces, process of

production, raw materials, test facilities / lab etc.,



II. Supplier facility should be in production mode during purchasers visit.

III. Price bid will be opened only after submission of satisfactory

report by the evaluation committee.

Annexure-3

3 Vendor Evaluation Format

The Manufacturer/ Bidder must submit the following table with

documentary proof to confirm his acceptance to meet the requirements

detailed above, without which the offer will not be considered.

Sr. No. Description

To be filled /

confirmed by the

bidder

1. Name of Company

2. Address of Company

3. Type of Company (Proprietary/Pvt.Ltd /Public

Ltd/Joint Venture/Consortium)

4. Registration number

5. Year of inception of the company

6. Registered address

7. Name & address of the office of the Chief Executive

of the company

8. Name & Designation of the officer of the Bidder to

whom all correspondence shall be made for

expeditious technical/ commercial co-ordination.

Telephone number

Fax number

E-mail address

9. Suppliers of Pneumatic systems /Hydraulics/fluid

systems



Sr. No. Description

To be filled /

confirmed by the

bidder

10. Bidder’s previous track record: The Manufacturer

should be a Company/Society/Firm registered since

last 5 (five) years or more.

11. Locations of the Branches of Company (if any)

12. Annual turn-over of the company for the last three

year

13. The Bidder should have average annual turnover of

not less than a value of Rs 960 lakhs per year in

the last three financial years ending with

31.03.2018.

14. Executed Single order value of Rs. 640 lakhs or

two orders of value Rs. 480 lakhs each or three

orders of value Rs.320 lakhs each or 4 four

orders value greater than Rs.100 lakhs

each (sum of value of all four orders shall be

greater than or equal to single order value of

640lakhs) executed during the last five years

ending with 30-11-2018

15. Shall submit the solvency certificate of Rs. 320

lakhs.

16. IT returns for the last 3 years

17. Major customers (Enclose copies of the Purchase

Orders)

18. Any customers feedback on the services which is in

writing (Pl. enclose copies)

19. Quality certification of the company

20. PAN Card Copy

21. The Profit & Loss Account details for the last 3 years

which is duly audited and Submitted as part of the



Sr. No. Description

To be filled /

confirmed by the

bidder

Annual Report

22. No. of employees (Supplier shall mention contract

personnel separately)

Engineers:

Supervisors:

Technicians:

Quality control engineers:

Administrative Staff.

23. Availability of fabrication & Test facility at supplier

premises to meet API/ ASTM codes to carryout

various tests

24. Details of inspection facilities / Instruments

available ( Brief description & specifications shall be

provided)

25. Bid validity period

(Min. 4 months from due date of bid opening)

26. Confirm the Delivery time for the supply equipment

is 8months/240days from the date of Purchase

Order

27. Bidder shall send the following documents:

a) Product catalogues

b) Previous purchase order copies for last 3

years

c) Purchase orders on hand to be executed

d) Test certificates of previous supplies

e) Performance certificates from the users of



Sr. No. Description

To be filled /

confirmed by the

bidder

previous supplies

28. Details of purchase orders executed under Third

Party Inspection to be submitted, if any

29. The bidder should not have been blacklisted by

Central Government or any State Government

organization / department in India at the time of

submission of the Bid (Self-declaration has to be

attached)

30. Confirm acceptance of part order

31. Visit by Purchaser: During the Technical

evaluation of the Tender, if required the purchaser

has right to visit the bidder’s facilities to Clarify /

confirm the documents /claims submitted by him. It

is the responsibility of the bidder to submit

necessary supporting documents / to show his

facilities.

32. Supplier shall agree to all the terms and conditions

of the indent specifications

SIGNATURE :

NAME

:

DESIGNATION:

SEAL OF THE COMPANY DATE

:



Annexure-4

4 Schedule of Bidder’s Experience

The bidder shall furnish here under a list of relevant works executed by him to whom a reference may be made by the

PURCHASER in case the PURCHASER considers such a reference necessary.

Sr.

No.

Name &

address of

Client / Name

& address of

project or

plant (incl.

tel.no., fax

no., e-mail and

name &

designation of

person who

can be

contacted.

Purchase

Order /

Contact

no. and

Date.

(Copy of

PO to be

enclosed)

Brief

details of

equipment

/ system

covered

Scope of

services

(See

Legend)

Contract

price

(Rs)

Scheduled

date of

completion

Actual date

of

completion

Reasons for

delay in

completion,

if

applicable.

Remark

s

LEGEND: I - INSTALLATION, S – SUPPLY, SUP – SUPERVISION OF INSTALLATION, TC – TESTING AND COMMISSIONING

SIGNATURE :

NAME :

DESIGNATION:

COMPANY :

COMPANY SEAL DATE

RFP DOCUMENT OF PIF GAS SERVICING SYSTEMS(SECTION C) P a g e | 9


Annexure-5

5 Schedule of Bidder’s Present Work

The bidder shall furnish here under a list of relevant works being executed to whom a reference may be made by the PURCHASER in case the PURCHASER considers such a reference necessary.

Sr.

NO.

Name & address of

Client / Name &

address of project or

plant (incl. tel.no., fax

no., e-mail and name

& designation of

person who can be

contacted.

Purchase Order

/ Contact no.

and Date.

(Copy of PO to

be enclosed)

Brief details

of equipment

/ system

covered

Scope of

services

(See

Legend)

Contract

price (Rs)

Schedule

d date of

completio

n

Expecte

d date

of

completi

on

Remarks

LEGEND: I - INSTALLATION, S – SUPPLY, SUP – SUPERVISION OF INSTALLATION, TC – TESTING AND COMMISSIONING

SIGNATURE :

NAME :

DESIGNATION:

COMPANY :

COMPANY SEAL DATE



Annexure-6

6 Exceptions and Deviations

In line with tender document, Bidder may stipulate Exceptions and deviations to

the proposed conditions if considered unavoidable.

Sr.

No

Reference in Specification Dept.

Specification

Offered

Specification Deviation

Page No Clause No

NOTE :

� Only deviations are to be written in the above form.

� Any deviations taken by the Bidder to the stipulations of the Proposal

document shall be brought out strictly as per this format and enclosed

along with the bid.

� Any deviations not brought out in this Proforma and written elsewhere in

the Proposal document shall not be recognized and the same is treated as

null and void.

� Any willful attempt by the Bidders to camouflage the deviations by giving

them in the covering letter or in any other documents that are enclosed

may render the Bid itself non-responsive.

SIGNATURE :

NAME :

DESIGNATION:

SEAL OF THE COMPANY DATE :



Annexure-7

7 Checklist for Bid Submission

Sr no Description Response

by supplier

1. Are all the General terms and condition particulars as called

for in section A, (point 1 to 9) is fully read & understood? Yes / No

2. Are all the scope work & technical specifications as called for

in Section-Bare fully read understood? Yes / No

3. Schedule of prices & General particulars as per Section-C,

Annexure-1 is filled and signed Yes / No

4. All documents related to Prequalification criteria mention in

Section C as per Annexure- 2 have been met and all related

documents are enclosed in technical Bid

Yes / No

5. Demand Draft towards the Tender fee and Earnest Money

Deposit (EMD for 5lakhs) are enclosed in technical bid and

scan copy is uploaded in e-procurement portal.

Yes / No

6. The detailed scope of work and technical specifications are

understood and price was quoted accordingly (Refer

Section-B)

Yes / No

7. Confirmation that the quoted prices are firm and fixed till the

completion of scope of work. Yes / No

8. Validity of Offer is 4 months (minimum). Yes / No

9. Vendor Evaluation Format is attached (Refer Section C

Annexure-3) Yes / No

10. GST to be indicated in percentage Yes / No

11. Delivery Schedule with milestones Yes / No

12. Are General terms and Conditions as per Section A in the

proposal acceptable? Yes / No

13. If not acceptable, are the deviations brought out in the

"Schedule of Deviations" in section C Annexure-6 Yes / No

14. If there are technical deviations, are these filled in "Schedule

of Deviations from Tech. Specifications"? in Section C

Annexure-6

Yes / No

15. Warranty for the fully delivered and accepted items is 12

months Yes / No

16. 10 % of the Order Value shall be submitted as Performance Yes / No



Security for the performance of the contract along with

acceptance of order letter, which is valid till acceptance of the

items.

17. 10 % of the Order Value shall be submitted as Performance

Bank Guarantee, which is valid till completion of the warranty

period plus 3 months claim period.

Yes / No

18. Liquidated Damages are acceptable Yes / No

19. Last three years audited financial balance sheets are enclosed Yes / No

20. Registration certificate of the company is enclosed Yes / No

21. All the forms in Section C Annexure 1-6 are filled Yes / No

22. Technical documents are attached along with technical bid Yes / No

23. Section C Annexure 1 & 3 are filled and uploaded in e-

procurement portal Yes / No

SIGNATURE :

NAME :

DESIGNATION:




8 Technical Compliance to be submitted by the Bidder:

Sr.No Description Acceptance

of Bidder

Bidder shall send point wise acceptance to the following and shall submit

the poof for all points without which offer will not be considered.

8.1

Procurement of items :Confirm to procure flow

components ,pipes & piping elements from the specified

makes from the manufacturers or their authorized

Dealer/agents only

8.2

Submission of Dealership /agent certificate: Incase

the flow components, pipes and piping elements are

planned procure from the agents/dealers of the specified

manufacturers. Copy of the Dealer ship certificate shall be

submitted along with the offer.

(Not applicable if any item is planned to procure

from direct for manufacturers)

8.3

Delivery schedule: Bidder shall confirm that the

delivery of the equipment as 8(240days) months from the

date of Purchase Order.

8.4

Bidder factory equipment details/Agency Details :

The bidder shall submit the details of the

machinery/manpower available/required for realization of

the equipment as in- house /at the agency to carry out

the same work by subcontracting/outsourcing

a) 3D Modeling and Pipe analysis software’s / b) the 6 G Qualified Welder(min. of 3 welders) &

ITI Qualified fitters(min. of 3) for carrying out

works

c) skilled workers for carrying out the assembly and

testing (As per demanded by purchaser based on

the need)

d) Orbital welding machine

e) Equipment for carrying out operations like

bending, cutting & grinding

f) Hydro and pneumatic testing equipment

8.5 Evaluation with reference to the tender document

as per each serial number of section B

8.5.1 Acceptance to scope of the work & supply of the

equipment as per Sr.No 3.0

8.5.2 Acceptance to design ,fabricate & testing and equipment

quantity mentioned in Sr.No 4.0 and 5.0

8.9.3 Acceptance to design and selection of the flow



components as per 6.1 to 6.18

8.5.4 Acceptance to follow general conditions as per Sr.No 7.0

8.5.5

Acceptance to follow the guide lines during procurement

of flow components and piping elements as per Sr.No

7.1

8.5.6 Acceptance to follow the guide lines during fabrication,

testing & conditioning of equipments as per Sr.No 7.2A

8.5.7 Acceptance to follow the guide lines during assembly &

integrated testing of equipment as per Sr.No 7.2B

8.5.8

Acceptance to procure the flow components , instruments

,pipes ,piping elements& other elements as per technical

specification given in Sr.No 6.1 to 6.18

8.5.9 Acceptance to quantity & details of the flow components

as per list of flow components(Table No 6 to 14)

8.5.10 Acceptance to follow the schedule of equipment as per

Sr.No 9

8.5.11 Acceptance to follow the schedule given in Sr.No.10

8.5.12 Acceptance to follow QAP as per Sr.No 12

8.6 Confirm equipment Prices Quoted shall be inclusive

of all charges(except GST/CDT)

8.7 Acceptance to all purchase related terms and

conditions.

8.8 Acceptance to supply spare valves as per finalized

list (after finalization of model numbers)

8.9 Acceptance to vendor evaluation and submission of

required documents during vendor evolution

8.10

Acceptance to submit the warranty certificate for

proper performance of the equipment for 12moths

from the date of installation

8.11 Acceptance to supply the equipment to SDSC SHAR

8.12

Acceptance to replace the equipment /parts with

new one for any damage during transportation and

handling without any additional charges

8.13 Acceptance to overall L1 condition (Definition of

overall L1 (cost of equipment and spares).

SIGNATURE :

NAME :

DESIGNATION:


Documents

PIF GAS SERVICING SYSTEMS (SECTION –B) Page | 58 · 2019. 1. 17. · VP03 15NB 400 PN420 2 way Reduced bore Threaded Vent NIL All threaded valves shall be of but weld union type