UP POSITION

DOWN POSITION

Mechanism Width 989 38.9

(For All Models PIC-H 1 / PIC-H 2 / PIC-H 3)

Mechanism Frame Width 967 38.1

(For All Models PIC-H 1 / PIC-H 2 / PIC-H 3)

FUNCTIONThis mechanism will movea panel vertically to reveal

a screen behind.

SUITABILITYThis technical sheet

uses the largestversion (PIC-H 3)of the mechanism

as an example.

SPECIFYINGThe mechanism requires

the screen to berecessed into the wall.

Maximum panel weightis 35kg [77.23lb].

CONTROLSupplied with basic infrared

remote. Can be learnt bymany learning remotes.

Also has switch control andRS232 so can be operated by

relays, switches, Crestron /AMX or Lutron systems.

DESIGN HIGHLIGHTS

Quiet smooth motion•

Stylish look and finish•

OPTIONS

PIC-H 1 size also available •(for maximum travel of 710 [28])

PIC-H 2 size also available •(for maximum travel of 860 [33.9])

PIC-H Custom sizes also available•

NOTE

All dimensions are •measured in mm [in]

WARNINGIt is the responsiblity ofthe installer to warn allpotential end users of

the dangers of interferingwith mechanisms during

operation

IMPORTANTMechanisms which liftor move weights need

to be checked on ayearly basis for anydamage which mayresult in an accident

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

PIC-H3 - Picture Lift Mechanism Technical SheetISSUE 006

SHEET 1 of 3

Pic

ture

Tra

vel 1

010

39.8

Pic

ture

Inte

rnal

Fram

e H

eigh

t 121

047

.6

Minimum Internal PictureFrame Width 1055 41.5

A

A

Pic

ture

Tra

vel 1

010

39.8

UP POSITION10

03.

9

100

3.9

B

B

DOWN POSITIONPROCEDURE:

Decide the required 'Picture 1.Travel'. Ensuring the screen recess height is accounted for and shall be covered by the picture.

Select mechanism based on 2.'Picture Travel' and 'Mechanism Frame Height' using Mechanism Selection/Sizing Table.

Ensure Picture is larger than 3.the 'Mechanism Frame'.

Mechanism Details

NOTE: Custom sized mechanisms are available to suit specific requirements

MECHANISM SELECTION / SIZING TABLE

MECHANISM PICTURE TRAVEL MECHANISM FRAME HEIGHT

PIC-H 1 710 [28.0] 910 [35.8]PIC-H 2 860 [33.9] 1060 [41.7]PIC-H 3 1010 [39.8] 1210 [47.6]

PIC-H CUSTOM CUSTOM HEIGHT - 200 [7.9] CUSTOM HEIGHT

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

PIC-H3 - Picture Lift Mechanism Technical SheetISSUE 006

SHEET 2 of 3

Mechanism Cutout Width1000 39.4

C

C

D

Mec

hani

smC

utou

t Hei

ght 1

345.

3

MinimumPictureInternalDepth

32 1.3

Picture-WallClearance

10 0.4

MinimumMechanism

Cutout Depth80 3.1

351.

4

Mov

ing

Pan

elFr

ame

Thic

knes

s

602.

4

DETAIL D

Mounting Details

NOTE:

The screen should be mounted in a recess with suitable clearance around it for ventilation and mounting.

The depicted representaive setup has the screen mounted on a Future Automation V74 product.

CONTROL & SIGNAL:

A control box (measuring 220mm X 130mm X 50mm) shall need to be located in an easily accessible location.

A four-core mains power cable shall need to be routed from the control box to the mechanism.

A 1500mm long infrared lead shall be connected to the control box.

PICTURE PANEL:

The maximum moving panel weight that the mechanism can lift is 35kg [77.2lb].

Custom designs can be made to lift more; all custom designs have extra costs and longer lead times.

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

PIC-H3 - Picture Lift Mechanism Technical SheetISSUE 006

SHEET 3 of 3