[ ]

TallBoy 4P & 6P

Tallboy 4 shown

In order to familiarize yourself with your new tent, we recommend you “test pitch” before your first adventure. For additional information please visit www.kelty.com. Package Includes: Tent carry bag, tent body, tent fly, two tent poles, guyline cords, and tent stakes.

1

On an even piece of ground lay out tent body and stake corners. Assemble poles, making sure all pole sections are fully connected at joints. Gently slide one pole into the sleeve and insert the pole tip into the corner grommet. Repeat for the other pole.

Pro Tip: Do not shake poles out during assembly, take care of your gear and it will take care of you!

2

Ensure that the pole tips remain in the grommets. Then walk to the opposite corner, flex pole while gently lifting the tent canopy. Insert pole tip into corner grommet and repeat for the other pole.

Pro Tip: Life is easier with a friend! Grab a buddy and raise the tent together.

Ridge pole sleeve inside rain fly. Hook & loop fly

pole wrap Rain Fly Attachment & corner grommets

3

Drap rainfly over tent body, use color coded corners to help with registration. Connect each corner rainfly buckle to the mathcing buckle at each corner. Leave them loose for now. Locate ridge pole, side underneath rain fly above the door, front to back, Insert ridge pole into pole sleeve inside rain fly, then repeat for the other side.

4

Attach hook & loop underside of rainfly, (at each guyout point). Then Tension all rainfly corner webbings to tension rainfly.

Retention sas needed, guy out all guylines.

Thank you for your buniess! If you have any question please visit www.kelty.com or contact customer service.