Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
There are basically two typesof fiber optics: diffuse orthrough-beam.The diffuse models have anintegrated emitter andreceiver at the cable end.The through-beams use twoseparate cables.
2.2.12
BFOPlastic Fiber Optics
PhotoelectricSensors
Another plus
For the ultimate in flexibility,fiber optics for userassembly are also available:any desired combinationsare possible with the trim-to-length duplex cable andvarious end fittings.
It’s easy to see why fiberoptics are so commonlyused: The variety of endconfigurations, with straightor angled light exit, flexibleoptical head or coaxialfibers, the various fiberdiameters and the ability totrim them to the desiredlength.
Applications
– Small parts detection– For tight mounting
conditions– Inspecting parts features– Counting (e.g. counting
drops)– Precise parts positioning– Handling and assembly– Robotics
2.2.13
BFOPlastic Fiber OpticsProduct overview
2.2
2.3
6
PhotoelectricSensors
Type
Plastic Fiber OpticsBFO 74A-LA-KB-PZK-10-02BFO 74A-LA-NB-PZK-10-02BFO 74A-LA-RB-PZK-10-02BFO D22-LA-AD-EAK-52-02BFO D22-LA-TB-EAK-10-02BFO D13-LA-QB-EAK-05-02BFO D22-LA-QB-PAK-05-02
BFO 74A-XA-HB-PZK-10-02BFO 74A-XB-KB-PZK-10-02BFO 74A-XA-JB-PZK-20-02BFO 74A-XB-LB-PZK-15-02BFO D22-XA-SB-EAK-20-02BFO D22-XA-UB-EAK-20-02BFO N22-XA-VB-EAK-10-02BFO N22-XA-RB-EAK-10-02BFO D10-XA-GB-EAK-10-02BFO D22-XA-MB-PAK-10-02
BFO D22-LD-EAK-10-20
Fiberarrangement
Lightexit
Fiberdiameter
Page
2.2.152.2.142.2.152.2.152.2.142.2.152.2.15
2.2.162.2.182.2.172.2.182.2.172.2.172.2.162.2.172.2.172.2.18
2.2.19
Str
aigh
t
90°
2.2
mm
1.3
mm
Coa
xial
Dup
lex
Can
be
user
-ass
embl
ed
Ligh
t gr
id
Version
Thro
ugh-
beam
Diff
use
Fea-tures
Ben
dabl
e op
tical
hea
d
1.0
mm
Plastic Fiber Optics
www.balluff.de
Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...
Through-beam with BOS 15K Rangewith BOS 20K Rangewith BOS 73K Rangewith BOS 74K Range*
Ordering codeFibersCable lengthCan be trimmedFiber arrangementJacket ∅Core ∅Fiber bending radiusEnd pieceLight exitOptical head attachmentHead bending radiusGeneralTemperature rangeMax. pull force (at 20 °C)Special features
BFOPlastic Fiber OpticsThrough-beam
150 mm200 mm450 mm230 mm
BFO 74A-LA-NB-PZK-10-02
2 myes
Single fiber2.2 mm1 mm
≥ 25 mm
straightM4 thread≥ 10 mm
–35...+65 °C6 N
bendable optical head
150 mm200 mm450 mm230 mm
BFO D22-LA-TB-EAK-10-02
2 myes
Single fiber2.2 mm1 mm
≥ 25 mm
straightM4 thread≥ 10 mm
–35...+65 °C6 N
bendable optical head
Note!A fiber optic through-beam changes the normally open signal of the baseunit into a normally closed signal!
PhotoelectricSensors
*Range is reduced by 30 % when using the BOS 74K-UU-1FS-.. base unit.
One fiber optic cable each for ermitter and receiver are included.All user-configurable cables are supplied with the appropriate cutting tool.
2.2.14
Cutting tool BFO CT andadapter BFO D10-LA-DC-10
2.2.15
BFOPlastic Fiber OpticsThrough-beam
150 mm200 mm450 mm230 mm
BFO D22-LA-AD-EAK-52-02
2 myes
Light grid2.2 mm
16 × 0.26 mm≥ 25 mm
straightM3 screws
–35...+65 °C6 N
PhotoelectricSensors
150 mm200 mm450 mm230 mm
BFO 74A-LA-KB-PZK-10-02
2 myes
Single fiber2.2 mm1 mm
≥ 25 mm
straightM4 thread
–35...+65 °C6 N
150 mm200 mm450 mm230 mm
BFO 74A-LA-RB-PZK-10-02
2 myes
Single fiber2.2 mm1 mm
≥ 25 mm
straightM3 thread
–35...+65 °C6 N
40 mm90 mm60 mm
BFO D13-LA-QB-EAK-05-02
2 myes
Single fiber1.3 mm0.5 mm
≥ 15 mm
90°Clamp
–35...+65 °C6 N
50 mm60 mm95 mm70 mm
BFO D22-LA-QB-PAK-05-02
2 myes
Single fiber2.2 mm1 mm
≥ 25 mm
90°Clamp
–40...+70 °C6 N
Plastic Fiber Optics
www.balluff.de
2.2
2.3
6Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...
Cutting tool BFO CT andadapter BFO D10-LA-DC-10
10 mm35 mm20 mm
BFO 74A-XA-HB-PZK-10-02
2 myes
duplex2 × 1 mm
2 × 0.5 mm≥ 15 mm
straightM4 thread≥ 10 mm
–35...+65 °C6 N
bendable optical head
15 mm15 mm35 mm20 mm
BFO N22-XA-VB-EAK-10-02
2 mno
duplex2 × 1 mm
2 × 0.5 mm≥ 15 mm
straightM3 thread≥ 10 mm
–35...+65 °C6 N
bendable optical head
Diffuse with BOS 15K Rangewith BOS 20K Rangewith BOS 73K Rangewith BOS 74K Range*
Ordering codeFibersCable lengthCan be trimmedFiber arrangementJacket ∅Core ∅Fiber bending radiusEnd pieceLight exitOptical head attachmentHead bending radiusGeneralTemperature rangeMax. pull force (at 20 °C)Special features
*Range is reduced by 30 % when using the BOS 74K-UU-1FS-.. base unit.
BFOPlastic Fiber OpticsDiffuse
Please note when installing the fiber optic cable:
– Provide mechanical protection– Observe permissible bending radius– Avoid crushing the fibers
PhotoelectricSensors
2.2.16
60 mm65 mm130 mm80 mm
BFO D22-XA-UB-EAK-20-02
2 myes
duplex2 × 2.2 mm2 × 1 mm≥ 25 mm
straightM4 thread
–35...+65 °C6 N
15 mm15 mm35 mm20 mm
BFO N22-XA-RB-EAK-10-02
2 mno
duplex2 × 1 mm
2 × 0.5 mm≥ 15 mm
straightM3 thread
–35...+65 °C6 N
60 mm65 mm130 mm80 mm
BFO 74A-XA-JB-PZK-20-02
2 myes
duplex2 × 2.2 mm2 × 1 mm≥ 25 mm
straightClamp
–35...+65 °C6 N
60 mm65 mm130 mm80 mm
BFO D22-XA-SB-EAK-20-02
2 myes
duplex2 × 2.2 mm2 × 1 mm≥ 25 mm
straightM6 thread≥ 15 mm
–35...+65 °C6 N
2.2.17
BFOPlastic Fiber OpticsDiffuse
PhotoelectricSensorsPlastic Fiber Optics
10 mm35 mm20 mm
BFO D10-XA-GB-EAK-10-02
2 myes
duplex2 × 1 mm
2 × 0.5 mm≥ 15 mm
straightM3 thread≥ 10 mm
6 Nbendable optical head
www.balluff.de
2.2
2.3
6Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...
15 mm70 mm25 mm
BFO 74A-XB-KB-PZK-10-02
2 myes
coaxial2 × ≥ 1 mm
1 × 0.5 mm/4 × 0.25 mm≥ 15 mm
straightM4 thread
–35...+65 °C6 N
60 mm70 mm150 mm90 mm
BFO 74A-XB-LB-PZK-15-02
2 myes
coaxial2 × 2.2 mm
1 × 1 mm/16 × 0.25 mm≥ 25 mm
straightM6 thread
–35...+65 °C6 N
Diffuse with BOS 15K Rangewith BOS 20K Rangewith BOS 73K Rangewith BOS 74K Range*
Ordering codeFibersCable lengthCan be trimmedFiber arrangementJacket ∅Core ∅Fiber bending radiusEnd pieceLight exitOptical head attachmentGeneralTemperature rangeMax. pull force (at 20 °C)
BFOPlastic Fiber OpticsDiffuse
PhotoelectricSensors
*Range is reduced by 30 % when using the BOS 74K-UU-1FS-.. base unit.
2.2.18
10 mm30 mm15 mm
BFO D22-XA-MB-PAK-10-02
2 myes
duplex2 × 1 mm
2 × 0.5 mm≥ 25 mm
90°Clamp
–40...+70 °C6 N
www.balluff.de
2.2.19
BFOPlastic Fiber Opticsfor user assembly
Individual solutions withuser-assembled plasticfiber optics
If “off-the-rack” solutionsaren’t for you, we have thealternative: Trim fiber opticcables to the length yourequire from a 20 m roll. Youwill only use exactly as muchcable as needed – providingsavings especially if you areusing multiple sensors.For simple applications, forexample, you may not needan end piece; simply clampthe end. Or for convenienceand flexibility, select fromamong the available endpieces. The plastic fiberoptic cable is simply crimpedinto the end piece. No gluingis necessary, and the endpiece can be removed at anytime.
2.2×4.4 mm duplex cable
150 mm20 m
BFO D22-LD-EAK-10-20
–40...+70 °C
6 N2×1 mm2.2 mm
SizeThrough-beamRange for L = 2 mCable length
Ordering code
Ambient operating temperature Ta
Pull force on fiber optics andconnection parts at 20 °CJacket ∅Core ∅Cutting tool BFO CT is included.
PhotoelectricSensors
∅ 7 mmLens
BFO D22-LA-BC-101500 mm
BFO 04-PK-1
GlassStainless steel
M4End piece with lens
BFO D22-LD-EAK-10-..450 mm
BFO D22-LA-CC-30
GlassStainless steel
M4End piece without lens
BFO D22-LD-EAK-10-..150 mm
BFO D22-LA-BC-10
Plastic (fibers)Stainless steel
SizeVersionUsed withRange
Range when usedwith 2 m plasticfiber cable.
Ordering codeMaterial– Optical surface– Threaded tube
∅ 4 mm90° end piece
BFO D22-LD-EAK-10-..150 mm
BFO D22-LA-AC-20
GlassStainless steel
Plastic Fiber Optics
2.2
2.3
6Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...
BFO 18Glass Fiber Optics
PhotoelectricSensors
MZG typeCorrugated metal armorStrain reliefGlass fiber bundle
– High temperature rated–20...+170 °C(if not flexed up to+250 °C)
– Flexible– Crush-resistant– Resistant to hot chips
Construction from the outside in
UZG typePolyurethane jacketStrain reliefGlass fiber bundle
– Flexible– Excellent chemical
resistance– Does not get brittle
from oils and coolantemulsions
– Temperature rated–20...+85 °C
SMG typeSilicon protection jacketCorrugated metal armor with strain reliefGlass fiber bundle
– Extended temperature range–40...+150 °C
– Very flexible– Crush-resistant
2.2.20
Series BFO 18A glass fiberoptic cables are designed forseries BOS 18M tubularsensors and are usedwherever a high level offunction reserve or chemicalresistance is required.Extremely temperatures arealso no problem.
Various straight or right-angle versions are availablewith polyurethane jacket,corrugated metal armor orsilicon protective jacket.
Recommended diffuse base units(see page 2.1.19/20/21 and 2.1.68)
BOS 18M-GU-1PF-... BOS 30M-GA-1PH-...BOS 18M-PU-1PD-SA... BOS 18M-PA-1PF-...,BOS 18M-PA-1PD-...
BFO 18Glass Fiber OpticsProduct overview
2.2.21
PhotoelectricSensorsGlass Fiber Optics
Type
Fiber opticsBFO 18A-LGG-...-10...BFO 18A-LFF-...-10...BFO 18A-LAA-...-20...BFO 18A-LCC-...-20...BFO 18A-LEE-...-20...BFO 18V-LCC-...-23...BFO 18V-LDD-...-23...
BFO 18A-XAG-...-15...BFO 18A-XAF-...-15...BFO 18A-XAA-...-30...BFO 18A-XAC-...-30...BFO 18A-XAE-...-30...BFO 18V-XAC-...-30...BFO 18V-XAD-...-30...
Lightexit
Auto-motiveapproval
Page
2.2.242.2.242.2.252.2.252.2.252.2.252.2.25
2.2.222.2.222.2.232.2.232.2.232.2.232.2.23
Str
aigh
t
Rig
ht-a
ngle
Version
Thro
ugh-
beam
Diff
use
Max. range
400 mm400 mm700 mm700 mm700 mm
2000 mm2000 mm
50 mm50 mm
100 mm100 mm100 mm200 mm200 mm
www.balluff.de
2.2
2.3
6Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...
Diffuse with BOS 18M-...-PD-.../BOS 18M-...-1PF-... RangeBOS 30M-... Range
Retroreflective with BOS 18M-...-PD-.../BOS 18M-...-1PF-... RangeBOS 30M-... Range
Ordering code Type UZGType MZGType SMG
Diameter of glass fiber bundleMax. pull force on fiber optics and connection partsMin. bending radiusFor use with BOS 18M-PA-1PD-...
BOS 18M-PU-1PD-SA 1.../-SA 4.../-SA 5...BOS 18M-GU-1PF-S4-YBOS 18M-PA-1PF-...BOS 30M-...
Range with BOS 18M-PA-1PD-...BOS 18M-PU-1PD-SA 1.../-SA 4.../-SA 5...BOS 18M-...-1PF-...BOS 30M-...
Range with BOS 18M-PA-1PD-...BOS 18M-PU-1PD-SA 1.../-SA 4.../-SA 5...BOS 18M-...-1PF-...BOS 30M-...
BFO 18Glass Fiber OpticsDiffuse
10 mm/50 mm
300 mm/1000 mm
BFO 18A-XAF-MZG-15-BFO 18A-XAF-SMG-15-
1.5 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
10 mm10 mm50 mm
300 mm300 mm1000 mm
10 mm/50 mm
300 mm/1000 mm
BFO 18A-XAG-MZG-15-
1.5 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
10 mm10 mm50 mm
300 mm300 mm1000 mm
Ranges referenced to Kodak gray card 90 % reflective.
Diffuse with glass fiber optics used as retroreflective:Ranges are referenced to BOS R1 reflector.
When using as a retroreflective type, twice the switching distancemust be used as the object dead zone.
Please append the desired length L of the fiber optics cableto the ordering code.Increments from 0.5 m to max. 3 m possible.Example:BFO 18...-30-0.5 for 0.5 m fiber lengthBFO 18...-30-2 for 2 m fiber length
PhotoelectricSensors
2.2.22
BFO 18Glass Fiber OpticsDiffuse
For BOS 30M use BFO 30-A1 adapter!
20 mm200 mm500 mm2000 mm
BFO 18V-XAD-MZG-30-BFO 18V-XAD-SMG-30-
3 mm80 N
60 mmno
yes (remove adapter disk)nono
yes (remove adapter disk)
20 mm
200 mm
500 mm
2000 mm
20 mm200 mm500 mm2000 mm
BFO 18V-XAC-MZG-30-BFO 18V-XAC-SMG-30-
3 mm80 N
60 mmno
yes (remove adapter disk)nono
yes (remove adapter disk)
20 mm
200 mm
500 mm
2000 mm
20 mm/100 mm
500 mm/1000 mm
BFO 18A-XAE-UZG-30-BFO 18A-XAE-MZG-30-BFO 18A-XAE-SMG-30-
3 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
20 mm20 mm100 mm
500 mm500 mm1000 mm
20 mm/100 mm
500 mm/1000 mm
BFO 18A-XAC-SMG-30-
3 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
20 mm20 mm100 mm
500 mm500 mm1000 mm
20 mm/100 mm
500 mm/1000 mm
BFO 18A-XAA-UZG-30-BFO 18A-XAA-MZG-30-BFO 18A-XAA-SMG-30-
3 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
20 mm20 mm100 mm
500 mm500 mm1000 mm
2.2.23
Approvals for theautomotive industry
Approvals for theautomotive industry
PhotoelectricSensors
Installation note
When usingBOS 18M-GU-1PF-S4-Y orBOS 18M-PU-1PD-SA…sensor please remove adapterdisk from the fiber optic cable!
Remove adapter diskfrom fiber optics!
Glass Fiber Optics
www.balluff.de
2.2
2.3
6Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...
Through-beam with BOS 18M-...-PD-... RangeBOS 18M-...-1PF-... RangeBOS 30M-... Range
Ordering code Type UZGType MZGType SMG
Diameter of glass fiber bundleMax. pull force on fiber optics and connection partsMin. bending radiusFor use with BOS 18M-PA-1PD-...
BOS 18M-PU-1PD-SA 1.../-SA 4.../-SA 5...BOS 18M-GU-1PF-...BOS 18M-PA-1PF-...BOS 30M-...
BFO 18Glass Fiber OpticsThrough-beam
100 mm400 mm
BFO 18A-LGG-MZG-10-BFO 18A-LGG-SMG-10-
1 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
100 mm400 mm
BFO 18A-LFF-MZG-10-BFO 18A-LFF-SMG-10-
1 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
Please append the desired length L of the fiber optics cable to the ordering code.Increments from 0.5 m to max. 3 m possible.Example:BFO 18...-20-0.5 for 0.5 m fiber lengthBFO 18...-20-2 for 2 m fiber length
Note!A through-beam fiber optic cable changes the normally open signal of the base unitinto a normally closed signal!
PhotoelectricSensors
2.2.24
2.2.25
BFO 18Glass Fiber OpticsThrough-beam
200 mm
2000 mm
BFO 18V-LDD-MZG-23-BFO 18V-LDD-SMG-23-
2 mm80 N
60 mmno
yes (remove adapter disk)nono
yes (remove adapter disk)
200 mm
2000 mm
BFO 18V-LCC-MZG-23-BFO 18V-LCC-SMG-23-
2 mm80 N
60 mmno
yes (remove adapter disk)nono
yes (remove adapter disk)
200 mm700 mm
BFO 18A-LEE-UZG-20-BFO 18A-LEE-MZG-20-BFO 18A-LEE-SMG-20-
2 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
200 mm700 mm
BFO 18A-LCC-UZG-20-
BFO 18A-LCC-SMG-20-
2 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
Approvals for theautomotive industry
Approvals for theautomotive industry
For BOS 30M use BFO 30-A1 adapter!
PhotoelectricSensors
200 mm700 mm
BFO 18A-LAA-UZG-20-BFO 18A-LAA-MZG-20-
2 mm80 N
60 mmyes
yes (remove adapter disk)yes (remove adapter disk)
yesno
Remove adapter diskfrom fiber optics!
Adapter BFO 30-A1
Installation noteBOS 30M with BFO 18V
Glass Fiber Optics
www.balluff.de
2.2
2.3
6Connectorspage 6.2 ...
Photoelectricsensorsaccessoriespage 2.3.2 ...