PGS1000 kVA

8/10/2019 PGS1000 kVA

1/6

8/10/2019 PGS1000 kVA

2/6

STANDBY 800 ekW 1000 kVA50 Hz 1500 rpm 400 Volts

FACTORY INSTALLED STANDARD & OPTIONAL EQUIPMENT

System Standard OptionalAir Inlet Single element canister type air cleaner (with

pre-cleaners)

Service indicator

Dual element & heavy duty air cleaners

Air inlet adapters & shutoff

Cooling Radiator with guard (43C)

Low Profile (frontal area)

Low Airflow

Coolant drain line with valve

Fan and belt guards

Caterpillar Extended Life Coolant*

Coolant level sensors*

Radiator duct flange

*Not included with packages without radiators

Radiator with 27C and 50C ambient capability

Radiant option for 57C ambient with treated water

Radiator removal

Heavy duty, harsh environment radiator at 43C and

50C

Heat exchanger and expansion tank

Coolant level switch gauge

Jacket water heater

Exhaust Dry exhaust manifold

Flanged faced outlets

Mufflers & Silencers

Stainless steel exhaust flex fittings

Elbows, flanges, expanders & Y adapters

Fuel Secondary fuel filters

Fuel priming pump

Flexible fuel lines

Fuel cooler**Not included on packages without radiators

Water separator

Duplex fuel filter

Generator Permanent magnet excited

Class H insulation

Class F temperature (105C prime/130C standby)

Reactive droop

Digital Voltage Regulator, 3-phase sensing

Bus bar connections

Winding temperature detectors

Anti-condensation space heaters

Digital Voltage Regulator with KVAR/PF control

Bearing temperature detectors

Oversize, premium & self-excited generators

Cable access box

European bus bars

Circuit breakers, UL listed, 3 pole with shunt trip (low

& medium voltage only)

Circuit breakers, IEC compliant, 3 pole with shunt trip

(low & medium voltage only)

Space heater relay

Power Termination Bus bar (NEMA and IEC mechanical lug holes)

-right side standard

Top and bottom cable entry

Circuit breakers, UL listed, 3 pole with shunt trip, 80%

or 100% rated, choice of trip units, manual or

electrically operated (low voltage only)

Circuit breakers, IEC compliant, 3 or 4 pole with shunttrip (low voltage only), choice of trip units, manual or

electrically operted

Shroud cover for bottom cable entry

Power terminations can be located on the left and/or

rear as an option. Also, multiple circuit breakers can

be ordered. (up to 3)

Governor Woodward 2301A isochronous Electronic load sharing

Control Panels User Interface panel (UIP) - rear mount

EMCP 3.1 Genset Controller

Speed adjust

AC&DC customer wiring area (right side)

CAT digital voltage regulator (CDVR) with KVAR/PF

control,3-phase sensing

Reactive droop Emergency Stop Pushbutton

EMCP3.3

Option for right or left mount UIP

Option for rear or left mount Customer wiring area

Voltage Adjust

Local and remote annunciator modules

Load share module

Discrete I/O module Generator temperature monitoring & protection

Lube Lubricating oil and filter

Oil drain line with valves

Fumes disposal

Gear type lube oil pump

Deep sump oil pan

Electric & air prelube pumps

Manual prelube with sump pump

Duplex oil filter

Oil level regulator

Mounting Structual Steel Tube

Anti-vibration mounts (shipped loose)

Isolator removal

Spring-tuype, zone 4

Starting/Charging 24 volt starting motor(s)

Batteries with rack and cables

Battery disconnect switch

Battery chargers (10&20 amp)

Oversize batteries

Ether starting aids

Heavy duty starting motors

Barring device (manual)

Air starting motor with control & silencer

General Crankcase explosion relief valves Automatic transfer switches (ATS)

EU Certificate of Conformance6 September 2006 1:58 A2

8/10/2019 PGS1000 kVA

3/6


SPECIFICATIONS

CAT GENERATOR

SR4B GeneratorFrame size......................................................................... 692

Excitation................................................Permanent Magnet

Pitch.............................................................................. 0.7143

Number of poles...................................................................4

Number of bearings......................................................... 002

Insulation....................... UL 1446 Recognized Class H with

tropicalization and antiabrasionIP rating..........................................................Drip Proof IP22

Alignment.....................................................Closed Coupled

Overspeed capability - % of rated...................................180

Wave form....................................................................003.00

Voltage regulation............Less than +/- 1/2% (steady state)Less than +/- 1% (no load to full load)Paralleling kit/Droop transformer.......................... Standard

Voltage regulator.3 Phase sensing with selectible volts/Hz

Telephone Influence Factor.............................. Less than 50

Harmonic distortion......................................... Less than 5%

CAT DIESEL ENGINE

3508 TA, 4-stroke-cycle watercooled diesel

Bore - mm.............................................. 170.00 mm (6.69 in)

Stroke - mm........................................... 190.00 mm (7.48 in)

Displacement - L................................... 34.53 L (2107.15 in3

)Compression ratio........................................................ 13.5:1

Aspiration........................................................................... TA

Fuel system............................................Direct unit injection

Governor type...................................................... Woodward

CAT EMCP3 CONTROLS

EMCP3.1 (standard)

Integral to generator terminal box

Single location for customer connections

IP 23 enclosure

24 Volt DC control

UL/CSA/CE

Electrically dead front

Lockable hinged door

Run/Auto/Stop control

True RMS metering, 3-phase

Speed Adjust (Optional 3.1)

Digital indications for:

- RPM

- Operating hours

- Oil pressure

Coolant Temperature

- System DC volts

L-L volts, L-N volts, phase amps, Hz

- ekW, kVA, kVAR, kW-hr, %kW, PF

Shutdowns with indicating lights for:

- Low oil pressure

- Overspeed

- Emergency stop

Under and over frequency

- Reverse powerOvercurrent

MODBUS isolated data link (RS-485 half-duplex) supports

seriall communication at data rate up to 115.2 kbaud (*)

6 September 2006 1:59 A3

8/10/2019 PGS1000 kVA

4/6

8/10/2019 PGS1000 kVA

5/6


RATING DEFINITIONS AND CONDITIONS

Meets or Exceeds International Specifications:AS1359,

AS2789, CSA, EGSA101P,IEC60034, ISO3046,

ISO8528,NEMA MG 1-32, UL508, 72/23/EEC, 89/336/EEC,

98/37/EEC.

Standby-Output available with varying load for the

duration of the interruption of the normal source power.

Standby power in accordance with ISO8528. Fuel stop

power in accordance with ISO3046, AS2789, and BS5514.

Standby ambient temperatures shown indicate a coolant

top tank temperature just below shutdown at 100 percent

load.

Ratingsare based on SAE J1995 standard conditions.

These ratings also apply at ISO3046 standard conditions.

Fuel Ratesare based on fuel oil of 35 API [16 C (60 F)]

gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb)

when used at 29 C (85 F) and weighing 838.9 g/liter

(7.001 lbs/U.S. gal.). Additional ratings may be available

for specific customer requirements. Consult your

Caterpillar representative for details.

6 September 2006 1:59 A5

8/10/2019 PGS1000 kVA

6/6


DIMENSIONS

Package DimensionsLength 5256.2 mm 206.94 in

Width 1844.0 mm 72.6 in

Height 2128.2 mm 83.79 in

Weight 10 478 kg 23,100 lb

Note: Do not use for installation design.See general dimension drawings fordetail (Drawing #1532779).

www.CAT-ElectricPower.co

2006 CaterpillAll rights reserve

Materials and specifications are subject to change without noticThe International System of Units (SI) is used in this publication

CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," awell as corporate and product identity used herein, are trademarks o

Caterpillar and may not be used without permissio

7878757

Performance No.: TM4514

Feature Code:: 508DE47

Source:: European Sourced

6 September 2006

6

Documents

PGS1000 kVA