ISTRUZIONI DI MONTAGGIOFITTING INSTRUCTIONS

INSTRUCTIONS DE MONTAGEMONTAGEANLEITUNG

INSTRUCCIONES DE MONTAJE

DISPOSITIVO DI TRAINO TIPOTOWING BRACKET TYPEDISPOTIF DE REMORQUAGE TYPEANHAENGEVORRICHTUNG TYPDISPOSITIVO DE CAREO TIPO

29041/VM

PER AUTOVEICOLIFOR CARSPOUR AUTOSFUR KRAFTAHRZEUGEPARA AUTOVEHICULO

PEUGEOT 207

TYPE WA, WC, WM 2006 →CLASSE E TIPO DI ATTACCOCLASS AND HITCH TYPECLASSE ET TYPE DE CROCHETKLASSE UND BEFESTIGUNGSARTCLASES DE ACOPLAMIENTO

OMOLOGAZIONEHOMOLOGATIONHOMOLOGATIONZULASSUNGAPROBACION

CARICO VERTICALE MAXS VALUEMASSE VERTICALE MAXIMUMZUL. STUETZLASTCARGA MAX. VERTICAL

F e3 00 – 7338(DIR. 94/20/CE)

S = kg 70

VALORE DD VALUEVALEUR DD WERTVALOR D

D = 7,4 kN

COPPIA DI SERRAGGIO PER VITI (8.8):TORQUE SETTINGS FOR NUTS AND BOLTS (8.8):

COUPLE DE SERRAGE POUR VIS (8.8):SCHRAUBENANZUGSMOMENT (8.8):

MOM. DE PRESION PARA TORNILLOS Y TUERCAS (8.8):

Cod. 29041/VM- Peugeot 207 -

v. 1.0 01/01/2011 P. 1 / 5

7,4 kN

M6 = 10 Nm M8 = 25 NmM10 = 55 Nm M12 = 85 NmM14 = 135 Nm M16 = 200 Nm

www.umbrarimorchi.itumbrarimorchi@umbrarimorchi.it

Tel. +39 075.5280260Fax +39 075.5287033Via Pizzoni 37/3906132 PerugiaITALY

SAFETY INSTRUCTIONS

Make sure that the towbar is suitable for the vehicle before starting the installation.

For safety, all work involving towbar installation (incl. electrical components) must be undertaken by skilled technicians.

Damaged components must be replaced with manufacturer’s spares and fitted by qualified staff.

It is forbidden to make any modification or structural repair to towing assembly.

The towball must be kept clean and lubricated. For added safety, his diameter (50 mm) must be checked at regular intervals. If the towball measures less than 49 mm after selected readings across the diameter, the towball must be replaced with a new one.

After 1000 km of towing, check torque settings for nuts and bolts, in accordance with the table.

Umbra Rimorchi cannot be held responsible for any defects in the product caused by fault or by any injudicious use whatever of the user or a person he is liable for.

Cod. 29041/VM- Peugeot 207 -

v. 1.0 01/01/2011 P. 2 / 5

FITTING INSTRUCTIONS

29041/VM PEUGEOT 207

Remove any mastic from contact points and paint with anti-rust paint.The necessary holes are all existing.

1 You may find it easier to remove bumper to aide fitting2 Cut the lower edge of the bumper as showed.3 Remove the tape protecting existing holes 04 on outside sides of the chassis rails. Insert cage nut M10.4 Locate item A using holes 04 and tighten.5 Locate items B using holes 03 and 02. Insert the bolts and tighten.6 Tighten all bolts and nuts as per torque settings.7 Connect the wirings to the socket.

Cod. 29041/VM- Peugeot 207 -

v. 1.0 01/01/2011 P. 3 / 5

Cod. 29041/VM- Peugeot 207 -

v. 1.0 01/01/2011 P. 4 / 5

Cod. 29041/VM- Peugeot 207 -

v. 1.0 01/01/2011 P. 5 / 5