Peristaltic (Hose) PumpL Series Low Pressure PumpsH Series High Pressure Pumps

2 Peristaltic Pump

Simply PerfectSimple in design but the perfect solution for your pumping applications.

Why use high maintenance pumps like progressive cavity, rotary lobe, and other positive displacement pumps when you can use the ARO peristaltic pump? These pumps provide the following benefits over other types of pumps:

Simply safe

Only the hose contacts the fluid, reducing the

risk of failure do to material selection

Hose is contained in a housing that has an optional

leak detector to prevent environmental contamination

Can run dry without damage

Low sound level: less than 70 dB at 1 meter

ATEX versions available

Simply designed

Pressures up to 15 bar

Flow rates up to 88m3/h

Ease of maintenance, low cost of ownership

Electric operation (enhanced efficiency)

Easy to clean with minimal disassembly

Maintain in place (reduced downtime)

Seal-less design with no packings or seals to replace

Hose is the only wearing part

Reversible rotation ideal for emptying lines or

removing blockages

Excellent solids handling capability

Up to 10% sludge handling capability

Up to 80% solids handling capability

Peristaltic Pump 3

Markets and Applications

ARO hose pumps can dispense, dose, meter and transfer a wide variety of fluids in the following markets

Pharmaceuticals and Life Sciences: protein liquids, vaccines, serum, plasma, syrups, bath foam, shampoo, brilliantine, shaving foam, sun lotions, hydrating cream, toothpaste, cleansing lotions, perfumes and solutions

Food and Beverage: olive oil, CIP applications, brewery yeasts and slurries, dairy, bakery, flavorings, additives, wine, tomato sauce, mashed potatoes, gelatin, fish past, slaughter house, liquid salt and fertilizers

Mining and Quarries: tailing slurries, sludges and reagents, lead sulfate, pyrite slurry, SABX, thickener underflow, flocculants & reagent feed, cyanide metering, activated carbon and acid slurries

Ceramics and Glass: fine china, brick and tiles, ceramic slips, mold filling, and press filters

Chemical: glues, corrosive acids and bases, alcohol, detergents

Water and Wastewater Treatment: sodium hypochlorite, lime, flocculate dispersion, kalic, ferric chloride, sludges and slurries

Pulp and Paper Industry: latex, slurries, kaolin dyes, sizing agents, retention aids and titanium dioxide

Paints, Inks and Pigments: dispersion mill feed, pigment and latex transfer, water base and acrylic paints, pigments, wall coatings

Printing and Packaging: varnishes, inks, coatings and adhesives

Textiles: fibers, dyes and acids

For over eighty years, the ARO Fluid Products business of Ingersoll Rand has developed partnerships with original equipment manufacturers and distributors, enabling us to better focus on the unique pumping needs of many industries. It’s a strategic merger of application expertise, along with our decades-long legacy of designing and building outstanding positive displacement pumps.

4 Peristaltic Pump

Principle of operation

Two rollers mounted at 180° on a rotor compress alternatively a thick-walled hose in a concentric guide and push the pumped liquid from the suction to the discharge side. Roller movement compresses the hose along the casing wall and creates constant vaccuum at the suction side of the pump. In this way, liquids are conveyed within the hose and do not contact any metal part.

Phase 1

The pump hose is compressed successively by two pressing rollers assembled on a rotating wheel. The first roller, by pressing the walls of the hose, will create a vacuum and attract the pumped liquid into the hose.

Phase 2

The pumped liquid has now entered the hose. The second roller will compress the hose and push the liquid towards the pump outlet.

Phase 3

When the roller at the discharge side is detached from the hose, the other roller diametrically opposite is already in compression preventing an internal product reversal. The pumped product is then successively pulled in and pushed out due to the wheel rotation.

High Performance Solutions L Series (Low Pressure) ARO L Series

This low pressure pump range is an excellent choice for handling materials that other pumps cannot. They effectively handle gaseous, abrasive and shear sensitive materials. Use these pumps to provide solutions to difficult pumping applications.

➊Fixed or variable, electric drives, with comprehensive control options to enable pumps to be configured to your requirements.

➋Removable cover with window for easy visual inspection

➌Heavy duty over-sized ball bearings

➍Compact footprint

➎Outlet pressures up to 4 bar

➏Connection material to suit application

➐No lubrication to contaminate process

➑ Rollers provide minimal friction loss and energy waste

➒Reduced heat buildup

➓ Handles semi-permeable solids (up to 1/3 the ID of the hose)

Pumps off-gassing or foaming materials

Metering precision ± 1%

Operating Data

Capacity up to 10 m3/h

Viscosity up to 15000 cps

Temperature of pumped liquid up to 135°C

Differential pressure up to 4 bar

Discharge pressure up to 4 bar

Available suction up to 0,6 bar

Peristaltic Pump 5

Principle of operation

Two shoes mounted at 180° on a rotor compress alternately a reinforced rubber hose that contains a fluid to be pumped. The compression of the hose by the rotating shoes creates continuous suction at the inlet of the pump and pushes the fluid to the outlet of the pump. The pump casing contains a lubricant that reduces friction and insures the best pump performance with a minimum of maintenance. The pumped fluid is in contact only with the interior of the rubber hose, thus permitting the pumping of a wide variety of reactive fluids.

Phase 1

The pump hose is compressed successively by two pressing shoes assembled on a rotating wheel. The first shoe, by pressing the walls of the hose, will create a vacuum and attract the pumped liquid into the hose.

Phase 2

The pumped liquid has now entered the hose. The second shoe will compress the hose and push the liquid towards the pump outlet.

Phase 3

When the shoe at the discharge side is detached from the hose, the other shoe diametrically opposite is already in compression thus avoiding an internal product reversal. The pumped product is then successively pulled in and pushed out due to the wheel rotation.

H Series (High Pressure) ARO H Series Designed to pump, meter and dose liquids other pumps avoid. These pumps will handle fluids of low or high viscosity, pasty, pure, neutral, aggressive or abrasive liquids, those containing gases or frothy or those containing solids.

➊No mechanical seal or stuffing box

➋Robust, ductile iron construction suitable for aggressive or viscous fluids

➌Fully self-priming up to 9,8 m

➍Damage-free continuous dry running

➎Outlet pressures up to 15 bar

➏Heavy-duty bearings, greased for life

➐Reversible flow

➑ Close coupled with gearbox protection

➒Metering precision ± 1%

Operating Data

Capacity up to 88 m3/h

Viscosity up to 100000 cps

Temperature of pumped liquid up to 100°C

Differential pressure up to 15 bar

Discharge pressure up to 15 bar

Available suction up to 0,9 bar

6 Peristaltic Pump

ARO hose lubricant is specifically designed to effectively

lubricate the H Series hoses and shoes to keep your pump running

efficiently. In addition to lubricating, it dissipates the heat away

from the hose allowing it to operate cooler. It is specifically

formulated to provide maximum life for your hose and pumps.

To ensure long life and operating efficiency use genuine ARO

hose lubricant in your ARO H series pumps. It can also be used in

competitive pumps to provide the best solution. Contact your ARO

fluid products representative to get the best lubricant available.

Hoses and Lubricants

ARO H Series Hose ConstructionARO uses high quality compounded rubbers, reinforced with 2 to 6 individual layers of braided polyamide, combined with an outer layer made to strict tolerances to ensure perfect compression. The design of ARO hoses, enable them to last up to 30% longer than other hoses on the market. ARO hoses are designed to fit most major hose pumps, making them the perfect replacement. ARO hoses can reduce costs and provided extended mean time between failures when replacing competitive brands.

Inner liner – avialable in a variety of materials to ensure optimum life and compatibility

Reinforcement layers (2 to 6) – provide excellent hose life and ultimate performance

Cover – provides excellent chemical resistance and superior wear

Stripe – color coded to ease material identification

Looking to get the best performance out of

your current peristaltic pump? Contact your local

ARO representative to obtain a quote for replacement

hoses and lubricant for your pumps. We supply

replacement for most major brands: Watson-Marlow Bredel;

Verder; PCM Delasco; Periflo and others.

Peristaltic Pump 7

*Any other hoses material requirements available on request†Dimensions for water-cooled models

Viton® is a registered trademark of DuPont Performance Elastomers L.L.C.

ARO Pump High Pressure Hose (H Series)

Typical Operating Material Color Stripe Application Temperatures °C Industry Approvals

Natural Rubber NR Black White General All Purpose -20 to +80 -

NBR Black Yellow Oily/Fatty Products -20 to +80 -

NBR Food Black White/Yellow Food/Hygienic Products -20 to +80 FDA

EPDM Black Red Corrosive Chemicals -20 to +100 -

CSM Black Blue Highly Corrosive -20 to +85 -

FKM (Viton®) Black Purple Highly Corrosive -20 to +85 -

ARO Pump Low Pressure Hose and Tubing (L Series)

Typical Operating Material Color Stripe Application Temperatures °C Industry Approvals

Norprene® Off white None Chemicals -35 to 135 FDA, 3-A and NSF

Silicone Rust None Biological/Life Sciences 0 to 140 USP Class VI, FDA, and NSF

PharMed® Cream None Pharmaceutical -50 to 135 USP Class VI, FDA, and NSF

EPDM Black Red Corrosive Chemicals 0 to 90 -

Natural Rubber (NR) Black Green General All Purpose 0 to 80 -

Nitrile Rubber Black 2 Braids General 0 to 80 -

Tygoprene® Clear None Solvents -40 to 120 -

ARO Hoses and tubing is specially formulated and constructed to provide optimum performance for the most demanding applications. The hoses are reinforced with layers of polyamide to maximize life and ensure quick restitution. A wide array of materials is available to ensure compatibility.

The table below highlights key features to assist you in selecting the best hose for your application. Feel free to contact your local ARO fluid products representative for assistance.

Hose Selection

Norprene® and Tygoprene® are registered trademarks of Saint-Gobain Performance Plastics PharMed® is a registered trademark of Norton Company

8 Peristaltic Pump

Pump Professionals

For 80 years, Ingersoll Rand ARO® pumps and fluid products have helped drive innovation and create new standards for how the world gets work done. We’re proud of our legacy and remain steadfastly committed to our customers’ productivity and profitability by supporting them any way we can.

Engineering We consistently deliver best-in-class technologies designed by highly skilled engineers who know how you work.

We can consult with you to identify your needs and customize solutions to best fit them.

Technical supportNo matter what your application or location happens to be, if you have questions or need assistance, our

professional, experienced technical support personnel are merely a phone call or e-mail away.

LogisticsWith our global manufacturing and distribution network, you’re guaranteed to have quick access to the equipment,

parts, or accessories you need to keep your operation running smoothly.

ingersollrandproducts.com arohotline@irco.com (800) 495-0276

Peristaltic Pump 9

Specifications

ARO High Pressure Pump

Pump Hose Maximum Maximum Maximum Lubricant Pump Model ID Flow RPM Pressure Capacity Weight

H005 5 mm 20,4 l/h 60 8 bar 0.4 l 25 kg

H012 10 mm 180 l/h 120 8 bar 0.4 l 25 kg

H013 10 mm 70 l/h 70 8 bar 0.4 l 25 kg

H015 15 mm 500 l/h 100 8 bar 0.8 l 35 kg

H020 20 mm 1020 l/h 120 8 bar 0.8 l 35 kg

H025 25 mm 2,8 m3/h 140 15 bar 1.4 l 80 kg

H032 32 mm 5,25 m3/h 140 15 bar 2.3 l 130 kg

H040 38 mm 8,19 m3/h 140 15 bar 2.3 l 145 kg

HX40 40 mm 9,6 m3/h 120 15 bar 6 l 210 kg

H050 51 mm 15,75 m3/h 90 15 bar 9 l 315 kg

H065 60 mm 20,7 m3/h 90 15 bar 9 l 335 kg

HX80 80 mm 27,5 m3/h 50 15 bar 20 l 650 kg

H080 80 mm 35 m3/h 50 15 bar 40 l 930 kg

H100 100 mm 54 m3/h 45 15 bar 60 l 1250 kg

H125 125 mm 88 m3/h 40 15 bar 100 l 1750 kg

ARO Low Pressure Pump

Pump Hose Maximum Maximum Maximum Pump Model ID Flow RPM Pressure Weight

L009 9 mm 140 l/h 140 4 bar 8 kg

L013 13 mm 348 l/h 140 4 bar 9 kg

L017 17 mm 910 l/h 140 4 bar 15 kg

L025 25 mm 2,71 m3/h 140 4 bar 36 kg

L030 30 mm 4,98 m3/h 120 4 bar 80 kg

L045 45 mm 13,85 m3/h 120 4 bar 127 kg

Low Pressure Pumps

High Pressure Pumps

10 Peristaltic Pump

Dimensions*

Low Pressure Pumps

F = Fixed Speed Geared Motor Only VM = Mechanical Variator and Geared Motor

*All dimensions are in millimeters (mm)

High Pressure Pumps

L009(F)

L009(VM)

L013(F)

L013(VM)

L017(F)

L017(VM)

L025(F)

L025(VM)

L030(F)

L030(VM)

L045(F)

L045(VM)

H005

H012

H013

H015

H020

H025

H032

H040

HX40

H050

H065

HX80

H080

H100

H125

Peristaltic Pump 11

A B

CD

F

HG

M

ØO

P

E

JI

L

K

N

Ø 6

A B

CD

H

F

M

O

G

PL

E

K

JI

N

Q

A B

CD

F

HG

M

ØO

P

E

JI

L

K

N

Ø 6

A B

CD

H

F

M

O

G

PL

E

K

JI

N

Q

Pump Series

H005 - H010

O

CDM N

L

I

J

P

F

G

Q Q

AB E

HH

4 x K

3 LOBES

2 LOBES

Pump Series

H015 - H020

C

FI

NM

AB

E

L

HH

Q Q

D

J G

4 x K

P

O

Pump Series

H025 - H125

L

M N

I

J

P

D C

E

AB

F

G

Q Q

HH

4xK

O

L

M N

I

J

P

D C

E

AB

F

G

Q Q

HH

4xK

O

Pump Series

L009 - L017

Pump Series

L025 - L040

Ingersoll Rand Industrial Technologies provides products, services and solutions that enhance our customers’ energy

efficiency, productivity and operations. Our diverse and innovative products range from complete compressed air systems,

tools and pumps to material and fluid handling systems. We also enhance productivity through solutions created by

Club Car, the global leader in golf and utility vehicles for businesses and individuals.

www.ingersollrandproducts.com

Distributed by:

©2012 Ingersoll Rand IRITS-0812-042 0213

www.kriorand.com 

ПКФ КРИОПРОМ официальный дистрибьютор Ингерсолл‐Рэнд в Украине 

г. Одесса, ул. Дерибасовская, 3 т/ф +38 0482 357745÷49 e‐mail: info@kriorand.com