Performa Valve Specifications - qualitywaterforless.com · Valve Materials Certification. . . . . . . . . . . . . . . . . . . . . . . . . . NSF/ANSI 44 rated component for material

imagination at work

Performa Valve Specifications263 and 268 Configurations

Flow Rates (Valve Only) – Logix and 900 Series ControllersService @ 15 psi (1.03 bar) drop . . . . . . . . . . . . . . . . . . . . . . . 25.0 gpm (5.7 m3/h)Backwash @ 25 psi (1.72 bar) drop . . . . . . . . . . . . . . . . . . . . 20.0 gpm (4.5 m3/h)Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cv = 6.50 (Kv = 5.6)Backwash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cv = 4.00 (Kv = 3.5)

Flow Rates (Valve Only) – 400 Series ControllersService @ 15 psi (1.03 bar) drop . . . . . . . . . . . . . . . . . . . . . . . 25.0 gpm (94.6 Lpm)Backwash (Softener) @ 25 psi (1.72 bar) drop . . . . . . . . . . 13.3 gpm (50.4 Lpm)Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cv = 6.50 (Kv = 5.6)Backwash Softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cv = 2.68 (Kv = 2.30)

Valve Connections/DimensionsTank Thread. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1/2-inches – 8, maleInlet/Outlet Threads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3/4-inches – 12 UNC-2A maleDrain Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4-inch NPT, maleBrine Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8-inch NPT, maleDistributor Tube Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.050-inches (27 mm)Distributor Tube Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 ± 1/2-inches (13 ± 13 mm) above top of tank

Design Specifications/RatingsValve Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glass-filled Noryl® – NSF listed materialRubber Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compounded for cold water – NSF listed materialValve Materials Certification . . . . . . . . . . . . . . . . . . . . . . . . . . NSF/ANSI 44 rated component for material safetyWeight (Valve with Control). . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.34 Ibs (2.42 kg)Recommended Operating Pressure . . . . . . . . . . . . . . . . . . . . 20 - 120 psi (1.38 - 8.27 bar)

Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 100 psi (1.38 - 6.89 bar)Hydrostatic Test Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 psi (20.69 bar)Water Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35° - 100°F (2° - 38°C)Ambient Temperature* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35° - 120°F (2° - 48.9°C)*Recommended use of outdoor cover for direct sunlight applications.

OptionsTurbine for Demand Systems. . . . . . . . . . . . . . . . . . . . . . . . . . Internal standard Autotrol 1-inch (25 mm) turbineBypass Valve, Model 1265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Noryl®, 1-inch flow path

Bypass Fitting Kits:Copper, Sweat Tube Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4-inches, 1-inch or 3/4-inch (32 mm, 25 mm or 19 mm)CPVC, Solvent Weld Tube Adapter . . . . . . . . . . . . . . . . . . . . . 1-inch or 3/4-inch (25 mm or 19 mm)Plastic NPT Pipe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-inch male or 3/4-inch male (25 mm or 19 mm)Plastic BSPT Pipe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-inch male or 3/4-inch male (25 mm or 19 mm)Brass NPT Pipe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-inch male or 3/4-inch male (25 mm or 19 mm)Brass BSPT Pipe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-inch male or 3/4-inch male (25 mm or 19 mm)Brine Refill Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 gpm (.64 Lpm) fixed; .33 gpm (1.25 Lpm) fixed;

.77 gpm (2.91 Lpm) fixedCompatible with Regenerants/Chemicals. . . . . . . . . . . . . . Sodium chloride, potassium chloride, potassium perman-

ganate, sodium bisulfite✝, sodium hydroxide✝, hydrochloricacid✝, chlorine✝✝ and chloramines✝✝

✝ See owners manual for specific concentrations.✝✝Valve for use on potable water supply.

Specifications

2

Injector* Performance – Logix Series Controllers

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

M3/hr gpm

0.35

0.30

0.25

0.20

0.15

0.10

0.05

0.00 LWR6057

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120

TOTAL BRINE DRAW RINSE

Injector “F” (Peach)For 7-inch Tanks

0.11

0.10

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

M3/hr gpm

0.50

0.40

0.30

0.20

0.10

0.00LWR6057

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


Injector “G” (Tan)For 8-inch Tanks

0.16

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0.00

M3/hr gpm

0.70

0.60

0.50

0.40

0.30

0.20

0.10

0.00 LWR6151

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


Injector “H” (Light Purple)For 9-inch Tanks

0.18

0.16

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0.00

M3/hr gpm

0.80

0.60

0.40

0.20

0.00 LWR6151

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


Injector “J” (Light Blue)For 10-inch Tanks

0.25

0.20

0.15

0.10

0.05

0.00

M3/hr gpm

1.20

1.00

0.80

0.60

0.40

0.20

0.00 LWR6151

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


Injector “K” (Pink)For 12-inch Tanks

0.30

0.20

0.10

0.00

M3/hr gpm

1.50

1.25

1.00

0.75

0.50

0.25

0.00 LWR6164

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


Injector “L” (Orange)For 13- and 14-inch Tanks

*New injectors for high-efficiency regeneration sequence are standard with Logix Controllers.

NOTE: Actual injector performance is dependent on the resin used, tank geometry, elevated drain, etc. This injector data was taken using an empty tank(no resin).

3

Injector “A” (White) Injector “B” (Blue)

Injector “C” (Red)

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

0.00

M3/hr gpm

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


1.80

1.60

1.40

1.20

1.00

0.80

0.60

0.40

0.20

0.00 LWR4669

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

0.00

M3/hr gpm

1.80

1.60

1.40

1.20

1.00

0.80

0.60

0.40

0.20

0.00 LWR4669

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

0.00

M3/hr gpm

1.80

1.60

1.40

1.20

1.00

0.80

0.60

0.40

0.20

0.00 LWR4669

bar

PSI 202 3.5 5 6 7.5

40 60 80 100 120


Injector “D” (Green)

0.50

0.40

0.30

0.20

0.10

0.00

M3/hr gpm

2.402.202.001.801.601.401.201.000.800.600.400.200.00 LWR6017

bar

PSI 20400 600 800 1000 1200 1400 1600 1800 2000 2200

40 60 80 100 120 140


4

400 and 900 Series Controllers

P

R

E

S

S

U

R

E

D

R

O

P

F L O W R A T E

SERVICE FLOW

– Cv =6.5

BACKWAS

HFL

OW–

Cv=

4.00

LWR 5730

5 1510 20 25 30 350

m3/h

gpm

2.3 3.4 4.51.10 5.7 6.8 7.9

2.00

1.75

1.50

1.25

1.00

0.75

0.50

0.25

0.00

bar psi

30

25

20

15

10

5

0

Valve Flow Rate CharacteristicsLogix and 900 Series Controllers

P

R

E

S

S

U

R

E

D

R

O

P

F L O W R A T E

SERVICE FLOW– Cv =

6.5

BACKW

ASH

FLO

W–

Cv=

2.68

LWR 5730

5 1510 20 25 30 350

m3/h

gpm

2.3 3.4 4.51.10 5.7 6.8 7.9

2.00

1.75

1.50

1.25

1.00

0.75

0.50

0.25

0.00

bar psi

30

25

20

15

10

5

0

400 Series Controllers

donnajanos

Note

This is a 6-page gate-fold document. Pages 4 and 5 should be short-trimmed - see small tic marks at top and bottom of those pages for correct trim.

Electrical SpecificationsController Operating Voltage 12 Volt – AC (Requires use of GE Infrastructure supplied transformer)

Input Supply Frequency 50 or 60 Hz (Controller configuration dependent)

Motor Input Voltage 12 Volt – AC

Electronics Operating Voltage (Logix Series) 3.5 Volt – AC

Controller System Power Consumption 3 Watts average

Transformer Specifications – All ControllersAll Controllers require the use of a GE Infrastructure supplied transformer.

Transformer Output Voltage 12 Volt – AC 400mA

Transformer Input Options 115 Volt – AC 50/60 Hz; 230 Volt – AC 50/60 Hz; 100 Volt – AC 50/60 Hz

Transformer Plug Options Indoor North American Plug

Outdoor North American (UL Listed for outdoor use)

Japanese Plug

Taiwan/Korea Plug

Australian Plug

United Kingdom Plug

Mainland Europe Plug

Additional transformers may be available – call for more information

5

Controller Series

400 Series440i Time Clock• Value priced, reliable

mechanical control• Time-clock regeneration• Set it and forget it• 12-volt or 120-volt versions

available• 6- or 7-day regeneration• Operates 255, 263, 268 valves

460i Time Clock• Economical electronic-

demand control• Simple set-up and

programming• Calendar override• 12-volt operation• 7-day variable reserve• Operates 255, 268 valves

Logix Series740 Time Clock• Simple, economic electronic

time clock (chronometric)• 7- or 99-day regeneration

setting• High efficiency regeneration sequence• 12-volt operation• Filter or conditioner setting in one control• Operates 255, 263, 268 with one controller

760 Demand• Simple, economic electronic

demand (volumetric)• Calendar override• 12-volt operation• 28-day variable reserve• High efficiency regeneration sequence• Automatic capacity calculations• Operates 255, 263, 268 with one controller

742 Time ClockSame features as the 740 time clock, plus:• Fully programmable cycle times• Salt setting in 1-pound increments• Optional no-salt detector• Operates 255, 263, 268, 278, and Magnum IT

with one controller

762 DemandSame features as the 760, plus:• Fully programmable cycle times• Salt setting in 1-pound increments• Optional no-salt detector• Operates 255, 263, 268, 278, and Magnum IT

with one controller

GE offers a full range of valve controllers to meet all residential water-conditioning applications.

imagination at work

For More Information:Call GE Infrastructure Water & Process Technologies;Household Water Group at (262) 238-4400 or (800) 279-9404, or visit www.gewater.com/equipment/valve/index.jsp

©2005, General Electric Company.Printed in USA, P/N 1223489 Rev. C

North American Sales5730 N. Glen Park RoadMilwaukee, WI 53209-4403USA(262) 238-4400 Phone(262) 238-4402 Fax

Controller valve manufactured by:

D

IH

FG

CB

A

E

Performa Valve – Logix Series Controllerin cm

A 14.89 (39)B 7.83 (20)C 7.06 (18)D 8.46 (21.5)E 5.00 (12.5)

in cmF 5.33 (13.5)G 5.84 (15)H 3.44 (9)I 3.44 (9)

Performa Valve Outline DimensionsLogix Series Controllers

A

B

C

DE F

Inlet

Drain

Outlet

G

H I

J

K

L M

N

Performa Valve – 400 Series Controllerin cm

A 6.48 (16.5)B 2.50 (6.3)C 2.50 (6.3)D 12.07 (30.7)E 11.66 (29.6)

in cmF 11.66 (29.6)G 9.11 (23.1)H 3.37 (8.6)I 3.66 (9.3)J 8.71 (22.1)

in cmK 1.36 (3.4)L 5.82 (14.8)M 5.82 (14.8)N 2.88 (7.3)

400 Series Controllers

Backwash Number** Flow Rate (gpm) Flow Rate (Lpm)7 1.3 4.98 1.7 6.49 2.2 8.3

10 2.7 10.2

Backwash Number** Flow Rate (gpm) Flow Rate (Lpm)12 3.9 14.713 4.5 17.014 5.3 20.0

Backwash Flow Control Table

**Backwash flow controls sized for 5.0 gpm/ft2.

Documents

Performa Valve Specifications - qualitywaterforless.com · Valve Materials Certification. . . . . . . . . . . . . . . . . . . . . . . . . . NSF/ANSI 44 rated component for material