Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Peer-reviewed journal articles
1)-Crystallization-induced formation of rigid amorphous fraction
Maria Laura Di Lorenzo; Maria Cristina RighettiSUBJECTcalorimetrySUBJECTpolymer
crystallizationSUBJECTrigid amorphous fraction
Polymer crystallization Online 1 (2018).
https://dx.doi.org/10.1002/pcr2.10023
2)-Contribution of the rigid amorphous fraction to physical ageing of semi-crystalline PLLA
Righetti, Maria Cristina; Gazzano, Massimo; Delpouve, Nicolas; Saiter,
AllissonSUBJECTCrystallinitySUBJECTMobile amorphous fractionSUBJECTRigid amorphous
fractionSUBJECTInterphaseSUBJECTStructural relaxation
Polymer (Guildford) 125 (2017): 241–253.
https://dx.doi.org/10.1016/j.polymer.2017.07.089
3)-Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PTA)
Aliotta, Laura; Cinelli, Patrizia; Coltelli, Maria Beatrice; Righetti, Maria Cristina; Gazzano,
Massimo; Lazzeri, AndreaSUBJECTPoly(lactic acid)SUBJECTNucleating
agentSUBJECTMechanical propertiesSUBJECTTakayanagi modelSUBJECTCrystallinity
phases
European Polymer Journal 93 (2017): 822–832.
https://dx.doi.org/10.1016/j.eurpolymj.2017.04.041
4)-Low-temperature crystallization of poly(butylene succinate)
Di Lorenzo, Maria Laura; Androsch, Rene; Righetti, Maria CristinaSUBJECTPolymer
crystallizationSUBJECTPoly(butylene succinate)SUBJECTThermal analysis
European Polymer Journal 94 (2017): 384–391.
https://dx.doi.org/10.1016/j.eurpolymj.2017.07.025
5)-Crystallization of Polymers Investigated by Temperature-Modulated DSC
Righetti; Maria CristinaSUBJECTpolymerSUBJECTcrystallizationSUBJECTdifferential
scanning calorimetrySUBJECTtemperature-modulated differential scanning
calorimetrySUBJECTreversing meltingSUBJECTreversible meltingSUBJECTcrystalline
fractionSUBJECTmobile amorphous fractionSUBJECTrigid amorphous fraction
Materials (Basel) 10 (2017).
https://dx.doi.org/10.3390/ma10040442
6)-Endothermic features on heating of glasses show that the second glass to liquid transition
of water was phenomenologically-mistaken
Righetti, Maria Cristina; Tombari, Elpidio; Johari, G. P.SUBJECTGlass
transitionSUBJECTWaterSUBJECTPolymerSUBJECTGlass phenomenology
Thermochimica Acta 647 (2017): 101–110.
https://dx.doi.org/10.1016/j.tca.2016.11.011
7)-Rigid amorphous fraction and multiple melting behavior in poly(butylene terephthalate)
and isotactic polystyrene
Righetti, Maria Cristina; Di Lorenzo, Maria
LauraSUBJECTCrystallinitySUBJECTInterphaseSUBJECTMelting behaviorSUBJECTRigid
amorphous fraction
Journal of thermal analysis and calorimetry (Print) 126 (2016): 521–530.
https://dx.doi.org/10.1007/s10973-016-5553-0
8)-Time and Temperature Evolution of the Rigid Amorphous Fraction and Differently
Constrained Amorphous Fractions in PLLA
Righetti, Maria Cristina; Prevosto, Daniele; Tombari, ElpidioSUBJECTconstrained mobile
amorphous fractionSUBJECTcrystallinitySUBJECTdifferential scanning calorimetry
(DSC)SUBJECTinterfacesSUBJECTrigid amorphous fraction
Macromolecular chemistry and physics (Print) 217 (2016): 2013–2026.
https://dx.doi.org/10.1002/macp.201600210
9)-Aging kinetics of levoglucosan orientational glass as a rate dispersion process and
consequences for the heterogeneous dynamics view
Righetti, Maria Cristina; Tombari, Elpidio; Johari, G. P.SUBJECTaging
The Journal of chemical physics 145 (2016).
https://dx.doi.org/10.1063/1.4959806
10)-Thermodynamic study of heptane+amine mixtures. V. Excess and solvation Gibbs
energies
Lepori L.; Matteoli E.; Gianni P.; Righetti M.C.SUBJECTActivity
coefficientSUBJECTAminesSUBJECTExcess gibbs energySUBJECTGibbs energy of
solvationSUBJECTGroup contributionSUBJECTHeptaneSUBJECTVapour-liquid equilibrium
Fluid phase equilibria 387 (2015): 198–208.
https://dx.doi.org/10.1016/j.fluid.2014.12.017
11)-Evidences of Transesterification, Chain Branching and Cross-Linking in a Biopolyester
Commercial Blend upon Reaction with Dicumyl Peroxide in the Melt
Francesca Signori; Alessia Boggioni; Maria Cristina Righetti; Consuelo Escrig Rondan;
Simona Bronco; Francesco CiardelliSUBJECTBiodegradable polyester
blendSUBJECTBiodegradable thermoplasticSUBJECTECOVIOSUBJECTReactive
blendingSUBJECTPoly(lactic acid)
Macromolecular materials and engineering (Print) 300 (2015): 153–160.
https://dx.doi.org/10.1002/mame.201400187
12)-Enthalpy of melting of a'- and a-crystals of poly (L-lactic acid)
Maria Cristina Righetti; Massimo Gazzano; Maria Laura Di Lorenzo; René
AndroschSUBJECTPoly (L-lactic acid); Enthalpy of melting; a'- and a-crystals
European Polymer Journal 70 (2015): 221–220.
https://dx.doi.org/10.1016/j.eurpolymj.2015.07.024
13)-Enthalpy and entropy changes during physical ageing of 20% polystyrene - 80%
poly(alpha-methylstryrene) blend and the cooling rate effects
M.C. Righetti; G.P. JohariSUBJECTAgingSUBJECTEnthalpy and entropy
relaxationSUBJECTPolymeric Blends
Thermochimica Acta 307 (2015): 19–29.
https://dx.doi.org/10.1016/j.tca.2015.03.012
14)-Polycarbonate-based composites reinforced by in situ polytetrafluoroethylene fibrillation:
Preparation, thermal and rheological behavior
Antonioli, Diego; Sparnacci, Katia; Laus, Michele; Boarino, Luca; Righetti, Maria
CristinaSUBJECTcompositesSUBJECTrheologySUBJECTthermal properties
Journal of applied polymer science (Print) 132 (2015): 42401.
https://dx.doi.org/10.1002/app.42401
15)-The Irreversible Tetragonal to Trigonal Transformation in Random Butene-1/Ethylene
Copolymers
Di Lorenzo, Maria Laura; Androsch, Rene; Righetti, Maria CristinaSUBJECTRIGID
AMORPHOUS FRACTIONSUBJECTPOLYMORPHIC
TRANSFORMATIONSUBJECTISOTACTIC POLYBUTENE-
1SUBJECTPOLY(ETHYLENE-TEREPHTHALATE)SUBJECTCRYSTALLIZATION
BEHAVIOR
AIP conference proceedings 1695 (2015).
https://dx.doi.org/10.1063/1.4937318
16)-Conformationally disordered crystals and their influence on material properties: The
cases of isotactic polypropylene, isotactic poly(1-butene), and poly(L-lactic acid)
Mariacristina Cocca; René Androsch; Maria Cristina Righetti; Mario Malinconico; Maria Laura
Di LorenzoSUBJECTCrystal polymorphism; Conformational disorder; Condis mesophase;
Isotactic polypropylene; Isotactic poly(1-butene); Poly(L-lactic acid)
Journal of molecular structure (Print) (2014).
https://dx.doi.org/10.1016/j.molstruc.2014.02.038
17)-Rigid amorphous fraction and melting behavior of poly(ethylene terephthalate)
Maria Cristina Righetti; Michele Laus; Maria Laura Di Lorenzo
Colloid and polymer science (Print) 292 (2014): 1365–1374.
https://dx.doi.org/10.1007/s00396-014-3198-8
18)-Temperature Dependence of the Rigid Amorphous Fraction in Poly(ethylene
terephthalate)
Maria Cristina Righetti; Michele Laus; Maria Laura Di Lorenzo
European Polymer Journal 58 (2014): 60–68.
https://dx.doi.org/10.1016/j.eurpolymj.2014.06.005
19)-Volumetric investigation of the ternary system ethanol plus dimethylformamide plus
cyclohexane at 298.15 K
Gianni, P.; Lepori, L.; Matteoli, E.; Righetti, M. C.SUBJECTExcess
volumeSUBJECTApparent molar volumeSUBJECTTernary
mixtureSUBJECTDensitySUBJECTAssociation
Fluid phase equilibria 368 (2014): 112–119.
https://dx.doi.org/10.1016/j.fluid.2014.01.046
20)-Preparation and Properties of PTFE/PAI Nanocomposites
D. Antonioli; K. Sparnacci; M. Laus; L. Boarino; M.C. Righetti
Polymer composites (Online) 34 (2013): 1451–1459.
https://dx.doi.org/10.1002/pc.22444
21)-Thermal and mechanical properties of PES/PTFE composites and nanocomposites
M.C. Righetti; A. Boggioni; M. Laus; D. Antonioli; K. Sparnacci; L. Boarino
Journal of applied polymer science (Print) 130 (2013): 3624.
https://dx.doi.org/10.1002/app.39613
22)-Excess Gibbs Energies and Volumes of the ternary system ethanol + dimethylformamide
+ tetrahydrofuran at 298.15 K
E. Matteoli; L. Lepori; P. Gianni; M.C. Righetti
Fluid phase equilibria 356 (2013): 157–167.
https://dx.doi.org/10.1016/j.fluid.2013.07.034
23)-Physical ageing reduction in PES through the incorporation of rigid non-interacting
PTFE nanoparticles
M.C. Righetti. A. Boggioni; M. Laus; D. Antonioli; K. Sparnacci; E. Enrico; L. Boarino
Thermochimica Acta 571 (2013): 53–59.
https://dx.doi.org/10.1016/j.tca.2013.09.029
24)-The role of the crystallization temperature on the nanophase structure evolution of
poly[(R)-3-hydroxybutyrate]
M.C. Righetti; E. Tombari; M.L. Di Lorenzo
The journal of physical chemistry. B 117 (2013): 12303–12311.
https://dx.doi.org/10.1021/jp4063127
25)-Effect of thermal history on the evolution of crystal and amorphous fractions of poly[(R)-
3-hydroxybutyrate] upon storage at ambient temperature
M. L. Di Lorenzo; M.C. Righetti
European Polymer Journal 49 (2013): 510–517.
https://dx.doi.org/10.1016/j.eurpolymj.2012.11.004
26)-Evolution of crystal and amorphous fractions of poly[(R)-3-hydroxybutyrate] upon
storage
Di Lorenzo; M.L.; Righetti; M.C.
Journal of thermal analysis and calorimetry (Print) 112 (2013): 1439–1446.
https://dx.doi.org/10.1007/s10973-012-2734-3
27)-Amorphous/Crystal and Polymer/Filler Interphases in Biocomposites from Poly(butylene
succinate)
Signori F.; Pelagaggi M.; Bronco S.; Righetti M.C.
Thermochimica Acta 543 (2012): 74–81.
https://dx.doi.org/10.1016/j.tca.2012.05.006
28)-The role of the rigid amorphous fraction on cold crystallization of poly(3-
hydroxybutyrate)
Di Lorenzo M.L.; Gazzano M.; Righetti M.C.
Macromolecules (Online) 45 (2012): 5684–5691.
https://dx.doi.org/10.1021/ma3010907l
29)-Nonlinear determination of the equilibrium melting temperature from initial
nonreorganized crytals of poly(3-hydroxybutyrate)
Righetti M.C.; Di Lorenzo M.L.
Polymer engineering and science (Online) 52 (2012): 2383–2390.
https://dx.doi.org/10.1002/pen.23199
30)-Preparation and Properties of PTFE-PMMA Core-Shell Nanoparticles and
Nanocomposites
Antonioli D.; Laus M.; Zuccheri G.; Kapeliouchko V.; Righetti M.C.; Boarino L.; Sparnacci K.
Journal of Nanotechnology (Online) 2012 (2012): 875815.
https://dx.doi.org/10.1155/2012/875815
31)-Crystalline, mobile amorphous and rigid amorphous fractions in poly(L-lactic acid) by
TMDSC
Righetti M.C.; Tombari E.SUBJECTthree-phase modelSUBJECTcrystalline
fractionSUBJECTrigid amorphous fractionSUBJECTmobile amorphous
fractionSUBJECTchain mobility
522 (2011): 118–127.
http://www.cnr.it/prodotto/i/40692
info:cnr-pdr/source/autori:Righetti M.C., Tombari E./titolo:Crystalline, mobile amorphous and
rigid amorphous fractions in poly(L-lactic acid) by TMDSC/
32)-Melting temperature evolution of non-reorganized crystals. Poly(3-hydroxybutyrate)
Righetti M.C.; Di Lorenzo M.L.SUBJECTSuperheatingSUBJECTThermal
lagSUBJECTReorganizationSUBJECTsuperheatingSUBJECTthermal
lagSUBJECTreorganization
512 (2011): 59–66.
http://www.cnr.it/prodotto/i/168983
info:cnr-pdr/source/autori:Righetti M.C.; Di Lorenzo M.L./titolo:Melting temperature evolution
of non-reorganized crystals. Poly(3-hydroxybutyrate)/
33)-Coupling between crystal melting and rigid amorphous fraction mobilization in
poly(ethylene terephthalate)
Di Lorenzo M.L.; Righetti M.C.; Cocca M.; Wunderlich B.
Macromolecules (Print) 43 (2010): 7689–7694.
https://dx.doi.org/10.1021/ma101035h
34)-Calorimetry for Fast Authentication of Edible Oils
Angiuli M.; Bussolino G.C.; Ferrari C.; Matteoli E.; Righetti M.C.; Salvetti G., Tombari
E.SUBJECTDSCSUBJECTEdible oil authenticationSUBJECToil phase
transitionSUBJECTolive oilSUBJECTpolymorphism
International journal of thermophysics 30 (2009): 1014–1024.
http://www.cnr.it/prodotto/i/40423
info:cnr-pdr/source/autori:Angiuli M.; Bussolino G.C.; Ferrari C.; Matteoli E.; Righetti M.C.;
Salvetti G., Tombari E./titolo:Calorimetry for Fast Authentication of Edible Oils/
35)-Vitrification and devitrification of the rigid amorphous fraction in poly(ethylene
terephthalate)
Righetti M.C.; Di Lorenzo M.L.
E-Polymers 053 (2009).
http://www.cnr.it/prodotto/i/167274
info:cnr-pdr/source/autori:Righetti M.C.; Di Lorenzo M.L./titolo:Vitrification and
devitrification of the rigid amorphous fraction in poly(ethylene terephthalate)/
36)-Influence of crystal polymorphism on the three-phase structure and on the thermal
properties of isotactic poly(1-butene)
M. L. Di Lorenzo; M. C. Righetti; B. Wunderlich
Macromolecules (Print) 42 (2009): 9312–9320.
https://dx.doi.org/10.1021/ma901882g
37)-Crystalline, mobile amorphous and rigid amorphous fractions in isotactic polystyrene
M. C. Righetti; E. Tombari; M. L. Di Lorenzo
European Polymer Journal 44 (2008): 2659–2667.
http://www.cnr.it/prodotto/i/18103
info:cnr-pdr/source/autori:M. C. Righetti, E. Tombari, M. L. Di Lorenzo/titolo:Crystalline,
mobile amorphous and rigid amorphous fractions in isotactic polystyrene/
38)-ERRATUM to Enthalpy-based determination of crystalline, mobile amorphous and rigid
amorphous fractions in semicrystalline polymers Poly(ethylene terephthalate)
Righetti M.C.; Tombari E.; Angiuli M.; Di Lorenzo M.L.
467 (2008): 121.
http://www.cnr.it/prodotto/i/39991
info:cnr-pdr/source/autori:Righetti M.C., Tombari E., Angiuli M., Di Lorenzo
M.L./titolo:ERRATUM to Enthalpy-based determination of crystalline, mobile amorphous and
rigid amorphous fractions in semicrystalline polymers Poly(ethylene terephthalate)/
39)-Crystalline, mobile Amorphous and rigid amorphous fractions in isotactic polystyrene
Righetti M.C.; Tombari E.; Di Lorenzo M.L.SUBJECTisotactic polystyreneSUBJECTthree-
phase systemSUBJECTrigid amorphous fraction
European Polymer Journal 44 (2008): 2659–2667.
http://www.cnr.it/prodotto/i/39992
info:cnr-pdr/source/autori:Righetti M.C., Tombari E., Di Lorenzo M.L./titolo:Crystalline,
mobile Amorphous and rigid amorphous fractions in isotactic polystyrene/
40)-The three-phase structure of isotactic poly(1-butene)
Di Lorenzo M.L.; Righetti M.C.
Polymer (Guildford) 49 (2008): 1323–1331.
https://dx.doi.org/10.1016/j.polymer.2008.01.026
41)-The Low-Temperature Endotherm in Poly(ethylene terephthalate): Partial Melting and
Rigid Amorphous Fraction Mobilization
M.C. Righetti; M.L. Di Lorenzo; E. Tombari; M. Angiuli
The journal of physical chemistry. B 112 (2008): 4233–4241.
http://www.cnr.it/prodotto/i/171517
info:cnr-pdr/source/autori:M.C. Righetti; M.L. Di Lorenzo; E. Tombari; M. Angiuli/titolo:The
Low-Temperature Endotherm in Poly(ethylene terephthalate): Partial Melting and Rigid
Amorphous Fraction Mobilization/
42)-Enthalpy-based determination of crystalline, mobile amorphous and rigid amorphous
fractions in semicrystalline polymers. Poly(ethylene terephthalate) (vol 462, pg 15, 2007)
Righetti, Maria Cristina; Tombari, Elpidio; Angiuli, Marco; Di Lorenzo, Maria
LauraSUBJECTThree-phase system; Crystalline fraction; Mobile amorphous fraction; Rigid
amorphous fraction; Enthalpy
Thermochimica Acta 467 (2008): 121–121.
https://dx.doi.org/10.1016/j.tca.2007.10.019
43)-Poly(butylene terephthalate)/Poly(e-caprolactone) blends: Miscibility and thermal and
mechanical properties
Di Lorenzo, M. L.; La Pietra, P.; Errico, M. E.; Righetti, M. C.; Angiuli,
M.SUBJECTConcentrationSUBJECTMechanical propertiesSUBJECTMolar
massSUBJECTPolyethylene terephthalatesSUBJECTPolymer blends
Polymer engineering and science 47 (2007): 323–329.
https://dx.doi.org/10.1002/pen.20711
44)-Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Miscibility and thermal
and mechanical properties.
Di Lorenzo M.L.; La Pietra P.; Errico M.E.; Righetti M.C.; Angiuli
M.SUBJECTPOLYCARBONATE POLY(ETHYLENE-TEREPHTHALATE)
BLENDSSUBJECTESTER-INTERCHANGE REACTIONSSUBJECTTRANS-
ESTERIFICATIONSUBJECTMOLECULAR-WEIGHTSUBJECTPOLYMER BLENDS
Polymer engineering and science 47 (2007): 323–329.
http://www.cnr.it/prodotto/i/39487
info:cnr-pdr/source/autori:Di Lorenzo M.L., La Pietra P., Errico M.E., Righetti M.C., Angiuli
M./titolo:Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Miscibility and
thermal and mechanical properties./
45)-Calorimetry of edible oils: Isothermal freezing curve for assessing extra-virgin olive oil
storage history
Angiuli Marco; Ferrari Carlo; Righetti Maria Cristina; Tombari Elpidio; Salvetti
GiuseppeSUBJECTolive oil calorimetrySUBJECTlight and dark storageSUBJECTolive oil
phase
European journal of lipid science and technology (Print) 109 (2007): 1010–1014.
http://www.cnr.it/prodotto/i/39800
info:cnr-pdr/source/autori:Angiuli Marco, Ferrari Carlo, Righetti Maria Cristina,Tombari
Elpidio, Salvetti Giuseppe/titolo:Calorimetry of edible oils: Isothermal freezing curve for
assessing extra-virgin olive oil storage history/
46)-Promoting calorimetry for olive oil authentication
Ferrari C.; Angiuli M.; Tombari E.; Righetti M.C.; Matteoli E.; Salvetti G.SUBJECTisothermal
crystallizationSUBJECTmeltingSUBJECTdifferential scanning calorimetrySUBJECTolive oil
authenticationSUBJECTpolymorphism
Thermochimica Acta 459 (2007): 58–63.
http://www.cnr.it/prodotto/i/39802
info:cnr-pdr/source/autori:Ferrari C., Angiuli M., Tombari E., Righetti M.C., Matteoli E.,
Salvetti G./titolo:Promoting calorimetry for olive oil authentication/
47)-Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Influence of PCL
molecular mass on PBT melting and crystallization behavior
Righetti M.C.; Di Lorenzo M.L.; Angiuli M.; Tombari E.; La Pietra P.SUBJECTPolymeric
blendSUBJECTCrystallization kineticsSUBJECTMelting behaviorSUBJECTDSC (differential
scanning calorimetry)SUBJECTOptical microscopy
European Polymer Journal 43 (2007): 4726–4738.
http://www.cnr.it/prodotto/i/39803
info:cnr-pdr/source/autori:Righetti M.C., Di Lorenzo M.L., Angiuli M., Tombari E., La Pietra
P./titolo:Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Influence of PCL
molecular mass on PBT melting and crystallization behavior/
48)-Enthalpy-based determination of crystalline, mobile amorphous and rigid amorphous
fractions in semicrystalline polymers - Poly(ethylene terephthalate)
M. C. Righetti; E. Tombari; M. Angiuli; M. L. Di LorenzoSUBJECTthree-phase
systemSUBJECTcrystalline fractionSUBJECTmobile amorphous fractionSUBJECTrigid
amorphous fractionSUBJECTenthalpy
Thermochimica Acta 462 (2007): 15–24.
http://www.cnr.it/prodotto/i/169223
info:cnr-pdr/source/autori:M. C. Righetti, E. Tombari, M. Angiuli, M. L. Di
Lorenzo/titolo:Enthalpy-based determination of crystalline, mobile amorphous and rigid
amorphous fractions in semicrystalline polymers - Poly(ethylene terephthalate)/
49)-Self-decelerated crystallization in poly(butylene terephthalate)/poly(e-caprolactone)
blends
Di Lorenzo M.L.; Righetti
M.C.SUBJECTblendsSUBJECTcrystallizationSUBJECTdiffusionSUBJECTmiscibility
Journal of polymer science. Part B, Polymer physics 45 (2007): 3148–3155.
http://www.cnr.it/prodotto/i/169579
info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./titolo:Self-decelerated
crystallization in poly(butylene terephthalate)/poly(e-caprolactone) blends/
50)-Morphological analysis of poly(butylene terephthalate) spherulites during fusion
M. L. Di Lorenzo; M. C. RighettiSUBJECTDIFFERENTIAL SCANNING
CALORIMETRYSUBJECTRATESSUBJECTCRYSTALLIZATIONSUBJECTBEHAVIOR
Polymer bulletin (Berl., Print) 53 (2004): 53–62.
http://www.cnr.it/prodotto/i/168986
info:cnr-pdr/source/autori:M. L. Di Lorenzo, M. C. Righetti/titolo:Morphological analysis of
poly(butylene terephthalate) spherulites during fusion/
51)-Melting process of poly(butylene terephthalate) analyzed by temperature modulated
differential scanning calorimetry
M. C. Righetti; M. L. Di LorenzoSUBJECTHEAT-CAPACITYSUBJECTISOTHERMAL
CRYSTALLIZATIONSUBJECTREVERSIBLE
CRYSTALLIZATIONSUBJECTTHERMODYNAMIC PROPERTIESSUBJECTPOLYMERS
Journal of polymer science. Part B, Polymer physics 42 (2004): 2191–2201.
http://www.cnr.it/prodotto/i/168989
info:cnr-pdr/source/autori:M. C. Righetti, M. L. Di Lorenzo/titolo:Melting process of
poly(butylene terephthalate) analyzed by temperature modulated differential scanning
calorimetry/
52)-Structural reorganization in poly(butylene terephthalate) during fusion
Righetti M.C.; Di Lorenzo M.L.; Angiuli M.; Tombari ESUBJECTDIFFERENTIAL
SCANNING CALORIMETRYSUBJECTTEMPERATURE-MODULATED
CALORIMETRYSUBJECTHEAT-CAPACITYSUBJECTREVERSIBLE
Macromolecules (Print) 37 (2004): 9027–9033.
http://www.cnr.it/prodotto/i/169581
info:cnr-pdr/source/autori:Righetti M.C.; Di Lorenzo M.L.; Angiuli M.; Tombari
E/titolo:Structural reorganization in poly(butylene terephthalate) during fusion/
53)-Crystallization of Poly(butylene terephthalate)
M.L. Di Lorenzo; M.C. Righetti
Polymer engineering and science (Online) 43 (2003): 1889–1894.
http://www.cnr.it/prodotto/i/170001
info:cnr-pdr/source/autori:M.L. Di Lorenzo, M.C. Righetti/titolo:Crystallization of
Poly(butylene terephthalate)/
54)-Thermodynamics of mixing of poly(vinyl chloride) and poly(ethylene-co-vinyl acetate)
Righetti M.C.; Cardelli C.; Scalari M.; Tombari E.; Conti G.
Polymer (Guildford) 43 (2002): 5035–5042.
http://www.cnr.it/prodotto/i/172977
info:cnr-pdr/source/autori:Righetti M.C., Cardelli C., Scalari M., Tombari E., Conti
G./titolo:Thermodynamics of mixing of poly(vinyl chloride) and poly(ethylene-co-vinyl
acetate)/
===================================================================
Other publications (journals without peer review, book reviews,etc.)
1)-Amorphous fractions of poly(lactic acid)
Righetti M.C.SUBJECTCrystallinitySUBJECTInterphaseSUBJECTMobile amorphous
fractionSUBJECTrigid amorphpus fraction
Synthesis, Structure and Properties of Poly(lactic acid), edited by Maria Laura Di Lorenzo,
René Androsch, pp. 195–234. Berlin: Springer International Publishing AG, 2018
https://dx.doi.org/10.1007/12_2016_14
info:cnr-pdr/source/autori:Righetti M.C./titolo:Amorphous fractions of poly(lactic
acid)/titolo_volume:Synthesis, Structure and Properties of Poly(lactic
acid)/curatori_volume:Maria Laura Di Lorenzo, René Androsch/editore:
/anno:2018
2)-Analysis of polymer crystallization by calorimetry
M. L. Di Lorenzo; R. Androsch; A. M. Rhoades; M. C. RighettiSUBJECTPolymer
crystallizationSUBJECTcalorimetry
Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and
Applications, Volume 6, 2nd Edition, edited by S. Vyazovkin, N. Koga, C. Schick, pp. 253–299.
Amsterdam: Elsevier BV, 2018
https://www.sciencedirect.com/science/article/pii/B9780444640628000073?via%3Dihub
info:cnr-pdr/source/autori:M. L. Di Lorenzo, R. Androsch, A. M. Rhoades, M. C.
Righetti/titolo:Analysis of polymer crystallization by calorimetry/titolo_volume:Handbook of
Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume 6,
2nd Edition/curatori_volume:S. Vyazovkin, N. Koga, C. Schick/editore:
/anno:2018
3)-Physical ageing of semi-crystalline PLLA: Role of the differently constrained amorphous
fractions
M.C. Righetti; N. Delpouve; A. SaiterSUBJECTPoly(L-lactic acid); Physical
ageingSUBJECTStructural relaxationSUBJECTConstrained amorphous fraction
TOP Conference 2018, Ischia, 17-21 June 2018
http://www.cnr.it/prodotto/i/397926
info:cnr-pdr/source/autori:M.C. Righetti, N. Delpouve, A. Saiter/congresso_nome:TOP
Conference 2018/congresso_luogo:Ischia/congresso_data:17-21 June
2018/anno:2018/pagina_da:/pagina_a:/intervallo_pagine:
4)-Effect of different nucleating agent on crystallinity and properties of polylactic acid
L. Aliotta; P. Cinelli; M.C. Righetti; M.B. Coltelli; A. LazzeriSUBJECTNucleating
agentsSUBJECTCrystallinitySUBJECTMechanical propertiesSUBJECTPoly(lactic acid).
TOP Conference 2018, Ischia, 17-21 June 2018
http://www.cnr.it/prodotto/i/397927
info:cnr-pdr/source/autori:L. Aliotta, P. Cinelli, M.C. Righetti, M.B. Coltelli, A.
Lazzeri/congresso_nome:TOP Conference 2018/congresso_luogo:Ischia/congresso_data:17-21
June 2018/anno:2018/pagina_da:/pagina_a:/intervallo_pagine:
5)-Melting behaviour and rigid amorphous fraction in semi-crystalline polymers
M. C. Righetti; M. L. Di LorenzoSUBJECTPolymer meltingSUBJECTRigid amorphous fraction
Frontiers in Polymer Science, pp. 91, Riva del Garda, 20/05/2015, 22/05/2015
http://www.cnr.it/prodotto/i/388041
info:cnr-pdr/source/autori:M. C. Righetti, M. L. Di Lorenzo/congresso_nome:Frontiers in
Polymer Science/congresso_luogo:Riva del Garda/congresso_data:20/05/2015,
22/05/2015/anno:2015/pagina_da:91/pagina_a:/intervallo_pagine:91
6)-The influence of rigid amorphous fraction on crystallization kinetics of poly[(R)-3-
hydroxybutyrate] and its role on properties deterioration upon storage
M. L. Di Lorenzo; M.C. RighettiSUBJECTPoly[(R)-3-hydroxybutyrate]SUBJECTRigid
amorphous fractionSUBJECTCrystallization kinetics
Workshop "IUPAC Italia: stato dell'arte e strategie future", Roma, 8 aprile 2014
http://www.cnr.it/prodotto/i/388038
info:cnr-pdr/source/autori:M. L. Di Lorenzo, M.C. Righetti/congresso_nome:Workshop "IUPAC
Italia: stato dell'arte e strategie future"/congresso_luogo:Roma/congresso_data:8 aprile
2014/anno:2014/pagina_da:/pagina_a:/intervallo_pagine:
7)-Rigid amorphous fraction evolution during crystallization in PLLA and PHB
M.C. Righetti; E. Tombari
EPF2013 Pisa 16-21 giugno 2013, 2013
http://www.cnr.it/prodotto/i/296314
info:cnr-pdr/source/autori:M.C. Righetti, E. Tombari/congresso_nome:EPF2013 Pisa 16-21
giugno
2013/congresso_luogo:/congresso_data:2013/anno:2013/pagina_da:/pagina_a:/intervallo_pagine
:
8)-Competition Between Crystallization and Vitrification of the Rigid Amorphous Fraction in
Poly(3-Hydroxybutyrate)
Di Lorenzo M.L.; Righetti M.C.; Gazzano M.
6th International Conference on Times of Polymers (TOP) and Composites, pp. 36–38, Ischia,
ITALY, JUN 10-14, 2012
https://dx.doi.org/10.1063/1.4738390
info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C., Gazzano M./congresso_nome:6th
International Conference on Times of Polymers (TOP) and Composites/congresso_luogo:Ischia,
ITALY/congresso_data:JUN 10-14,
2012/anno:2012/pagina_da:36/pagina_a:38/intervallo_pagine:36–38
9)-Composites from biodegradable polyesters and hemp fibers: an effort towards the
enlightenment of polymer matrix-fiber interactions
Signori F.; Pelagaggi M.; Righetti M.C.; Bronco S.; Ciardelli F.
Hybrid Materials 2011, Strasbourg (France), 2011
http://www.cnr.it/prodotto/i/172687
info:cnr-pdr/source/autori:Signori F., Pelagaggi M., Righetti M.C., Bronco S., Ciardelli
F./congresso_nome:Hybrid Materials 2011/congresso_luogo:Strasbourg
(France)/congresso_data:2011/anno:2011/pagina_da:/pagina_a:/intervallo_pagine:
10)-Coupling between crystal fusion and mobilization of the rigid amorphous fraction in
poly(ethylene terephthalate)
M. L. Di Lorenzo; M. C. Righetti; M. Cocca; B. Wunderlich
11th Lähnwitzseminar on Calorimetry, Rostock (Germania) 6-11 giugno 2010., Rostock, 2010
http://www.cnr.it/prodotto/i/172258
info:cnr-pdr/source/autori:M. L. Di Lorenzo, M. C. Righetti, M. Cocca, B.
Wunderlich/congresso_nome:11th Lähnwitzseminar on Calorimetry, Rostock (Germania) 6-11
giugno
2010./congresso_luogo:Rostock/congresso_data:2010/anno:2010/pagina_da:/pagina_a:/interval
lo_pagine:
11)-Calorimetry for edible oil authentication
R. Ambrosetti; M. Angiuli; G. C. Bussolino; C. Ferrari; L. Lepori; E. Matteoli; D. Ricci; M. C.
Righetti; G. Salvetti; E. Tombari.
XIII Convegno AIPT (Associazione Italiana Proprietà termofisiche), pp. 25–36, Trento, 2007
urn:isbn:978-88-87380-62-0
info:cnr-pdr/source/autori:R. Ambrosetti, M. Angiuli, G. C. Bussolino, C. Ferrari, L. Lepori, E.
Matteoli, D. Ricci, M. C. Righetti, G. Salvetti, E. Tombari./congresso_nome:XIII Convegno
AIPT (Associazione Italiana Proprietà
termofisiche)/congresso_luogo:Trento/congresso_data:2007/anno:2008/pagina_da:25/pagina_a:
36/intervallo_pagine:25–36
12)-Enthalpy based determination of cristalline, mobile amorphous and rigid amorphouas
fractions in
Righetti M.C.; Tombari E.; Di Lorenzo; M.L.
“10th Lähnwitzseminar on Calorimetry”, 8-13 June 2008, Rostock, Germany., 2008
http://www.cnr.it/prodotto/i/116990
info:cnr-pdr/source/autori:Righetti M.C., Tombari E., Di Lorenzo,
M.L./congresso_nome:“10th Lähnwitzseminar on Calorimetry”, 8-13 June
2008/congresso_luogo:Rostock,
Germany./congresso_data:2008/anno:2008/pagina_da:/pagina_a:/intervallo_pagine:
13)-Metodi fisici per test d’identificazione rapida della varietà dei semi di girasole e della
qualità dell’olio estratto
Salvetti G.;
PI2008A000065, Nazionale
http://www.cnr.it/prodotto/i/144984
14)-The low temperature endotherm in poly(ethylene terephthalate): partial melting and rigid
amorphous fraction mobilization
Righetti M.C.; Di Lorenzo M.L.; Tombari E.
XXX National Congress on calorimetry, Thermal Analysis and Chemical Thermodynamics
Pisa, 9-12/12/2008, Pisa, 2008
http://www.cnr.it/prodotto/i/173597
info:cnr-pdr/source/autori:Righetti M.C., Di Lorenzo M.L., Tombari E./congresso_nome:XXX
National Congress on calorimetry, Thermal Analysis and Chemical Thermodynamics Pisa, 9-
12/12/2008/congresso_luogo:Pisa/congresso_data:2008/anno:2008/pagina_da:/pagina_a:/interv
allo_pagine:
15)-Calorimetric authentication of Italian monocultivar EVOOs
M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); E. Tombari (1); G. Colella (2);
L. Damico (2); G. Mita (2)
20° Congresso della Società Italiana per lo Studio delle Sostanze Grasse, Roma, 2007
http://www.cnr.it/prodotto/i/116820
info:cnr-pdr/source/autori:M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G. Salvetti (1), E.
Tombari (1), G. Colella (2), L. Damico (2), G. Mita (2)/congresso_nome:20° Congresso della
Società Italiana per lo Studio delle Sostanze
Grasse/congresso_luogo:Roma/congresso_data:2007/anno:2007/pagina_da:/pagina_a:/intervall
o_pagine:
16)-Light induced oxidation of Italian monocultivar EVOOs: a calorimetric study
M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); E. Tombari (1); A. Mattei (2)
0° Congresso della Società Italiana per lo Studio delle Sostanze Grasse, Roma, 2007
http://www.cnr.it/prodotto/i/116821
info:cnr-pdr/source/autori:M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G. Salvetti (1), E.
Tombari (1), A. Mattei (2)/congresso_nome:0° Congresso della Società Italiana per lo Studio
delle Sostanze
Grasse/congresso_luogo:Roma/congresso_data:2007/anno:2007/pagina_da:/pagina_a:/intervall
o_pagine:
17)-Multiple Melting Behavior in Poly(butylene terephthalate): Calorimetric and
Morphological Analyses
Di Lorenzo M.L.; Righetti M.C.
, 2007
http://www.cnr.it/prodotto/i/172243
info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./titolo:Multiple Melting Behavior in
Poly(butylene terephthalate): Calorimetric and Morphological
Analyses/titolo_volume:/curatori_volume:/editore:/anno:2007
18)-Fast authentication of Extra Virgin Olive Oil by DSC calorimetry
E. Tombari (1); M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); A. Mattei (2);
O. Lorenzini (2)
4th Euro Fed Lipid Congress: Oils, Fats and Lipids for a Healthier Future, Madrid, Spagna,
2006
http://www.cnr.it/prodotto/i/116711
info:cnr-pdr/source/autori:E. Tombari (1), M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G.
Salvetti (1), A. Mattei (2), O. Lorenzini (2)/congresso_nome:4th Euro Fed Lipid Congress:
Oils, Fats and Lipids for a Healthier Future/congresso_luogo:Madrid,
Spagna/congresso_data:2006/anno:2006/pagina_da:/pagina_a:/intervallo_pagine:
19)-Fast Authentication Of Edible Oils By DSC Calorimetry
G. Salvetti (1); M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); E. Tombari (1); O. Lorenzini
(2); A. Mattei (2)
CALCAT ’06: Calorimetry and Thermal Analysis Conference, Santiago de Compostela,
Spagna, 2006
http://www.cnr.it/prodotto/i/116747
info:cnr-pdr/source/autori:G. Salvetti (1), M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), E.
Tombari (1), O. Lorenzini (2), A. Mattei (2)/congresso_nome:CALCAT ’06: Calorimetry and
Thermal Analysis Conference/congresso_luogo:Santiago de Compostela,
Spagna/congresso_data:2006/anno:2006/pagina_da:/pagina_a:/intervallo_pagine:
20)-Adulterazioni dell’olio di oliva extra vergine per aggiunta di olio di semi rilevabili con
calorimetria DSC
E. Tombari (1); M. Angiuli (1); C. Ferrari (1); M. C. Righetti (1); G. Salvetti (1); A. Mattei (2);
O. Lorenzini (2)
Pinerolo: Chiriotti, 2006
http://www.cnr.it/prodotto/i/137239
info:cnr-pdr/source/autori:E. Tombari (1), M. Angiuli (1), C. Ferrari (1), M. C. Righetti (1), G.
Salvetti (1), A. Mattei (2), O. Lorenzini (2)/titolo:Adulterazioni dell’olio di oliva extra vergine
per aggiunta di olio di semi rilevabili con calorimetria DSC/editore:
/anno:2006
21)-Adulterazioni dell’olio di oliva extra vergine per aggiunta di olio di semi rilevabili con
calorimetria DSC
E. Tombari (1); M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); A. Mattei (2);
O. Lorenzini (2)
7° Congresso Italiano di Scienza e Tecnologia degli Alimenti (CISETA), Cernobbio (C0), 2005
http://www.cnr.it/prodotto/i/116710
info:cnr-pdr/source/autori:E. Tombari (1), M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G.
Salvetti (1), A. Mattei (2), O. Lorenzini (2)/congresso_nome:7° Congresso Italiano di Scienza e
Tecnologia degli Alimenti (CISETA)/congresso_luogo:Cernobbio
(C0)/congresso_data:2005/anno:2005/pagina_da:/pagina_a:/intervallo_pagine:
22)-THERMODYNAMICS OF MIIXING, DIELECTRIC RELAXATION
E. Tombari; M.C. Righetti; M. Scalari; G. Conti
AIM - XVI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Pisa, 2003
http://www.cnr.it/prodotto/i/116424
info:cnr-pdr/source/autori:E. Tombari, M.C. Righetti, M. Scalari, G.
Conti/congresso_nome:AIM - XVI Convegno Italiano di Scienza e Tecnologia delle
Macromolecole/congresso_luogo:Pisa/congresso_data:2003/anno:2003/pagina_da:/pagina_a:/in
tervallo_pagine:
23)-Cristallizzazione e morfologia del poli(butilene tereftalato)
Di Lorenzo M.L.; Righetti M.C.
AIM - XVI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Pisa, 2003
http://www.cnr.it/prodotto/i/172841
info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./congresso_nome:AIM - XVI
Convegno Italiano di Scienza e Tecnologia delle
Macromolecole/congresso_luogo:Pisa/congresso_data:2003/anno:2003/pagina_da:/pagina_a:/in
tervallo_pagine:
24)-La calorimetria modulata nello studio della fusione dei polimeri: poli(butilene tereftalato)
Di Lorenzo M.L.; Righetti M.C.
XVI Convegno italiano di scienza e tecnologia delle macromolecole, Pisa, 2003
http://www.cnr.it/prodotto/i/174022
info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./congresso_nome:XVI Convegno
italiano di scienza e tecnologia delle
macromolecole/congresso_luogo:Pisa/congresso_data:2003/anno:2003/pagina_da:/pagina_a:/in
tervallo_pagine: