Upload
8256
View
30
Download
3
Embed Size (px)
DESCRIPTION
very good procedure
Citation preview
START
Put the XP CD in the Drive toInstall XP and restart the Computer.
On restart press any key to“BOOT FROM THE CD”
Press “Enter”
Press “F8”
Press “ESCAPE”
Select C: and Press Enter
Select “Format NTFS/Quick” andPress “ENTER”
Press “ENTER”
Press “F”
Formatting will start now. After it’sfinished Press “ENTER” to restart the
computer.[Note: Do not remove the CD from the drive and on restart do not press any key until the system
start the file copying automatically]
After restart the computer will start installation automatically to copy the
required window files
Press “Next” at this form
Name: homeCompany Name: abc
Press “Next”After this type in the XP CD-Key here
eg: R6YVD-KRGXD-4HGJ3-86WX8-DTP98Press “Next”
Take care of the Computer namethat it displays in the next form.
If it is not “home” delete whatever is displayed on the ‘Computer Name’ and
change it to “home”
Date & Time Settings[Select “India Time +05:30”]
Press “NEXT”[The computer will start further processing...Wait
till it restarts again]
Click option “Not Right Now”Press Next
Next Insert the Intel Mother Board CD and VGA Graphic Card CD one after another
and install the necessary Drivers.
END OF WINDOW INSTALLATION
Page 1 of 15
Go to Top of page
WINDOW XP INSTALLATION
START
Go to “My Computer” and Right Click on it. Select the “Properties”
Click “Computer Name” tab
Click on “Computer Description:”And type “home”
Press “Apply”
Click the “Advanced” tab
Click on “Environment Variables”
Go to ‘User Variables’Click on each variable and edit it to change the entries as show below:
TEMP C:\TEMPTMP C:\TEMP
Go to ‘System Variables’Click on each variable and edit it to change the entries as show below:
TEMP c:\tempTMP c:\temp
Now Press “OK”
Now Press “OK”
END OF TEMP CREATION
Page 2 of 15
TEMP FILE CREATION
Go to Top of page
START
Run “setup.exe”
Change the Destination path:“c:\oracle\ora81”
Press “Next”
Select“Oracle 8i Enterprise Edition
8.1.6.0.0”and Press “Next”
Keep “Typical” and Press “Next”
‘DATABASE IDENTIFICATION’ Form:
“Global Database Name: ORCL”“S I D : ORCL”
and Press “Next”
Click “Install”
After installation of all files, It will show that all have succeeded
“END OF INSTALLATION”
Press “EXIT”
Press “Yes”
END OF ORACLE INSTALLATION
Page 3 of 15
ORACLE INSTALLATION
START
Press “Start” then “Programs”Go to “Oracle8i”
Database Administration
Database Configuration Assistant
Click “Create Database [Next]”
Click “Custom [Next]”
Click “Multipurpose [Next]”
Concurrently Connected Users (5) [Next]
Dedicated Server Mode [Next]
DESELECT“Oracle Jserver”
“Advanced Replication”“SQL *Plus Help” [NEXT]”
Global Database Name: “pds”S I D : “pds” [Next]
Control Files [Keep the defaults] [Next]
(A)
“System Tab”
Size = 100AutoExtend = Off
Min. Extend = 0 (zero)% increase = 1Initial KB = 100Next KB = 100
Min. = 1Unselect Unlimited checkbox
Max = 121
(B)
“User Tab”
Name = pdsSize = 300
AutoExtend = OffMin. Extend = 0 (zero)
% increase = 1Initial KB = 50Next KB = 50
Min. = 1Max = 121
(C)
“User Tab”
Name = rollback_segsSize = 50
AutoExtend = OffMin. Extend = 0 (zero)
Initial KB = 512Next KB = 512
Min. = 2Max = 4096
(D)
“Index Tab”
Keep all the defaults
Page 4 of 15
DATABASE & TABLESPACE CREATION
(E)
“Temporary Tab”
Name = temp_segsSize = 30
AutoExtend = OffMin. Extend = 0 (zero)
Initial KB = 100Next KB = 100
Min. = 1Max = 121
[NEXT]
Redo Log 1 File Size(KB): 10240Redo Log 2 File Size(KB): 10240Redo Log 3 File Size(KB): 10240
[NEXT]
CheckPoint Interval : 50000Checkpoint Timeout : 0 (Zero)
[NEXT]
Keep all the defaults in this form
[NEXT]
Trace file for …“Keep all the defaults in this form”
[NEXT]
Create a directory “sqls” inside c:\oracle
Save the information to a batch file(Check the Radio button)
File name : “sqlpds.bat” [Locate the directory c:\oracle\sqls & save this file
in that dir]”
SAVE
OK
OK
Go to the Directory “c:\oracel\sqls”
Replace the contents of the file “pdsrun & pdsrun1” with the contents of same file which are located in the directory “PDS
RUN FILES TO BE OVERWRITTEN”
FINISHED
Page 5 of 15
START
Create a Directory“c:\win32app\Bentley”
Now run the MICROSTATION setup file
Keep in mind you have to install the “COMPLETE Version”
Setup.exe
[NEXT]
Yes
Browse [c:\win32app\Bentley\>]
Complete [NEXT]
[NEXT]
[NEXT]
Deselect “View Readme”
Finish
Copy “msj.lic” file from the software dump to “c:\win32app\bentley\program\
licensing”
FINSH
Page 6 of 15
INSTALL MICROSTATION
BATCH SERVICE INSTALLATION
START
Ensure that c:/windows/system32 has the following DLL files: GAPI32.DLL & mapi32.dll
Setup.exe
I agree
User Name : “Blank”Company : “Blank”
Serial No: 11223396000316
Continue [Create a directory “c:\win32app\ingr\
ntbatch”]
User name: “HOME/administrator”
CONTINUE
Go to the root c: drive then brow to “c:\win32app\ingr\ntbatch”
OK
CONTINUE
YES
YES
User Name: HOME\administrator
CONTINUE OK OK
Intergraph batch Manager (Double Click)
CANCEL
CLOSE
CLOSE
Make sure that you add your Username and Pwd to the Bathc Manager after installing it…. IMPORTANT
START
RUN
“regedit”
HKEY_LOCAL_MACHINE Software
IntergraphBatch Services (Double Click)
“TempDeliveryDir” & “TempDeliveryFile”
fill this : “c:\temp”
FILE
EXIT
FINISH
Page 7 of 15
RIS INSTALLATION
START
RUN
“regedit”
HKEY_LOCAL_MACHINE Software
IntergraphMake a new variable
Right click New “String Value”Fill this: “Common”
“Value Date = c:\win32app\ingr\share”
OK
CLOSE
Now install “RIS” from the Dump / Cd
Setup.exe
Next
Yes
Serial No: 11223396000316User Name: “home”
Company Name: “abc”
YES NEXT (Typical) NEXT NEXT OK FINISH
Now Restart the Computer
FINISH
START
Page 8 of 15
Creation of Database for PDS Services of ORACLE
RUN
“cmd”
cd\
cd oracle
sqlpds.bat(run this batch file)
This file will run for a while and should not generate any errors
Message should come“Server Manager Complete”
FINISH
To connect ORACLE START
Page 9 of 15
INSTALL OF “PDS”
Programs
Oracle – Orahome81 Database Administrator
Database Configuration Assistance
Change database configuration [Next]
Oracle Service PDS [NEXT]
Dedicated Server Mode [NEXT]
FINISH
Now to see if it is connected to Oracle
Start Programs Oracle Application Development SQL PLUS “User Name:
system/manager@pds” OK Oracle will be connected
Now INSTALL PDS
Setup.exe
Continue
User Name: homeCompany Name:
Serial No: 11223396000316
Click all the component to install EXCEPT :
- SmartPlant P&IDrest all Click and a check should come in
the check box against each item
Load Components
Yes
Yes
All components will be loaded one by one
OK
FINISH
Start
Setup.exe
Continue
Page 10 of 15
INSTALL “ISO - GEN”
I agree
User Name: “home”Comp. Name:
Serial No: 11223306003850
Continue
Continue
Continue
Create Directory YES
Complete Setup
OK OK FINISH
First of all stop “INTERGRAPH SERVICES”
Start Run services.msc
Pdlice intergaph PDS Licensing
Page 11 of 15
CRACK “PDS”
[Select this line and Right click on it]
STOP OK
CLOSE [File Exit]
Go to the CRACK Directory of Install_Pds [DUMP or in CD]
Copy the “pdlic.cab” file to “c:\win32app\ingr\pdlice\bin”
Replace Yes [make sure you have the original copy
somewhere]** DO THIS WITH Shift+Del PASTE
method **
Start the “Intergraph Services”
Start Run services.msc
Pdlice intergaph PDS Licensing[Select this line and Right click on it]
START OK
CLOSE [File Exit]
Start
Programs
Page 12 of 15
Configure “PD SHELL for use”
PD Shell
PD shell
PD Shell Warning PDS Batch queries
Create
Click one by one all the modules in “PDS” Queue Creation
OK
Save Config…. YES
Warning Message: “proj_file does not contain a directory path”
OK
Browse
Right click on “pds.cmd” file & COPY
D:\ proj1
Right Click & PASTE
Click on the file & OPEN
MODIFY
Proj_file: d:\proj1Proj_addr: home
CONTINUE
OK
Go toC:\win32app\ingr\pdshell\sql\oracle
Create [Right Click Edit]
Inside this file fo to the Line:
Page 13 of 15
Create a Directory D:\proj1
Create a PROJECT
…alter user pd_proj1….
And change
“user” to “pds” [Total 15 Lines]
SEPERATELY ON THE DIFFERENT WINDOWGo to
Start Programs Oracle DBAdministration SQL *Plus Work
Hseet [Username: system/manager@pds]
In the blank space copy all the 15 + 15 lines from the “Create” file that was
changed to this space
Execute / F5
DO NOT CLOSE ANYTHING….JUST KEEP THEM MINIMISED..
Start Progam PD_Shell Express Program Creation
User Level New User
Do you Load 3D Sample from the Product YES
Click the Tick Button
Type the following in the next form and please remember to press “ENTER” after
typing in each column
Proj Number: proj1Project Name: projectComp. Name: projectJob No: projectPlant Name: project
Click the Tick Button
Metric (Click)
…NPD…
English (Click)
Click the Tick Button
Create a new schema (Click)
Create a new Schema (Click)
Do the following actions on the next screen:
o Click “Get Client Address” Buttono Database User Name: “pd_proj1”o Password: “pd_proj1”o OS Type: WINDOWS NTo Database Type: Oracle
Page 14 of 15
o Database Name: PDS [In Capitals]o DB Management Sys. Loc.: c:\oracle\ora81o OS Username: administratoro Click Apply
Repeat the steps (ii) & (iii) as example but change pd_ to dd, ra, ru, ee, re
And click “apply” everytime
Express Project Creation
Fill the following:
FileServer form Project: homeProj Data: d
Model data: dDraw data: d3D ref data: dReport data: dClash data: d
Design re. workstation:homeDrive Letter Design Rev. data: d
Click the Tick Button
Express Project Creation
Create Framework Project
Define frameworks sub-project data:Sub-project Number: 11Sub-project Name: fwp
Sub-project path: d:\proj1\fwpSub-project Node: home
Click the Tick Button
Do you want to create another framework sub proj: NO
Click the Tick ButtonWait briefly at this point
OK
START Programs PD Shell PD Shell Now Select the Project: Proj1
BEST OF LUCK WITH YOUR PDS
learning/projects
Page 15 of 15