Controls

H-67

CONT

ROLL

ERAC

CESS

ORIE

S

1/4 DINAccessories1/4 DIN MountingBrackets

3.5” C/C0.266” Dia. Mtg. Holes

Surface Mounting2040, 2104, and 3101 Series

Part No. 0006-12072 PCN 309315

3.5” C/C0.266” Dia. Mtg. Holes

Surface Mounting3901 Series

Part No. 0006-12081 PCN 309307

4.5(114)

3.5(89)

6(152)

4.5(114)

3.25(83)

Surface Mounting2040, 2104, 2110, 3340, 3380

Part No. 0006-12151 PCN 317980

3.5” C/C0.266” Dia. Mtg. Holes

4.5(114)

3.5(89)

4.5(114)

6(152)

5(127)

3.5(89)

6(152)

6(152)

4.5(114)

Surface Mounting for 2 Controllers2040, 2104, 3101, 2110, 3340, 3380

Part No. 0006-12157 PCN 339098

4.5(114)

3.5(89)

9.5(241)

4.5(114)

10.5(260)

4.5(114)

Side Mounting1/4 DIN Instruments

Part No. 0006-12034 PCN 313904

7/32”

2(51)

5.2(132)

4.2(107)

Controls

H-68

Description

The 1/8 and 1/16 DIN Mounting Adaptor Kitsallow you to easily convert an existing 1/4 DINpanel cutout for mounting an 1/8 or 1/16 DINinstrument.

1/8 & 1/16 DINMounting Adapter Kits

• Convert 1/4 DIN Mounting HoleCutouts

• Pre-drilled, Easy to Install

• 4 Screws and Nuts Included

Ordering Information

Description Part Number PCN1/4 to 1/8 DIN Mounting Adapter Kit 0006-12136 3069311/4 to 1/16 DIN Mounting Adapter Kit 0006-12137 306923

Dimensions

All Dimensions in Inches (mm)

1/8 DIN 1/16 DIN

3.9(99)

1.7(43)

3.6(91)

3.9(99)

1/8 DINCutout

1/16 DINCutout

3.9(99)

1.7(43)

1.7(43)

3.9(99)

1/16 DINSurface MountingBrackets

2.5(64)

Dimensions

0.375(10)

Cutout1.77 x 1.77

(43 x 43)

Depth2.12(54)

Description Depth (In, mm) Part Number PCN

Models 1600, 1601 and 1603 4.38 (111) 0006-12155 305200Surface Mounting BracketModels 1604 and 1605 Surface 5.13 (130) 0006-12154 305218Mounting Bracket

Ordering Information

Front View Front View

Front View Side View

All Dimensions in Inches (mm)

Controls

H-69

CONT

ROLL

ERAC

CESS

ORIE

S

Enclosures with Cutouts

ENC SeriesENC 4Instrument Enclosures

• NEMA 4X, Fiberglass Enclosureswith DIN cutouts or DoorWindow

• Prepunched Sub-Panel forWindow Design Enclosures

NEMA 4X fiberglass enclosure with hinged door window and pre-drilled sub-panel for eithersingle or double 1/4 DIN Mounting Brackets. Brackets are ordered separately (see accessorytable below.)

Description

The ENC series of enclosures are simpleboxes with either cutouts or with windowcovers for mounting 1/16 DIN (All 1600series) or 1/4 DIN (2104, 2110, 3101, 3340,3380) Controllers. (Controllers not included.)

The ENCs with cutouts allow the operator toeasily access the controller pushbuttons. TheENC enclosure with window covers ensureprotection for the controllers.

StockModel Description Status PCN

ENC4-QTR01 One 1/4 DIN Cutout, 8”H x 6.5”W x 6”D S 317913ENC4-SIX01 One 1/16 DIN Cutout 8”H x 6.5”W x 6”D NS 317921ENC4-SIX02 Two 1/16 DIN Cutouts, 8”H x 6.5”W x 6”D NS 317930ENC4-QTR02 Two 1/4 DIN Cutouts, 12”H x 10”W x 6”D S 317948

StockModel Description Status PCN

ENC4-QTRW0 NEMA 4X 12”H x 10”W x 6”D Subpanel predrilled S 317956for single or dual 1/4 DIN mounting brackets

Mounting Brackets for ENC 4 Enclosures with Windows

The NEMA 4X fiberglass enclosures have hinged front covers to allow for easy mounting andwiring. When the controller is installed according to factory recommendations the NEMA ratingof the controller is maintained.

StockModel Description Status PCN

0006-12151 Single 1/4 DIN Mounting Bracket S 3179800006-12157 Double 1/4 DIN Mounting Bracket S 339098

Controls

H-70

ENC SeriesENC 7Instrument Enclosures(cont’d.)

Mounting Plates for ENC 7 Enclosures

StockModel Description Status PCN

0006-12179 1/4 DIN Mounting Plate NS 3391000006-12177 1/16 DIN Mounting Plate NS 3391190006-12178 Dual 1/16 DIN Mounting Plate NS 339127

• NEMA 7/4, Explosion ProofEnclosure

• Suitable for 1/4 (2110, 2104,3101, 3340, 3380) & 1/16 DIN (all1600 series) Controllers under5.5” in Length

Description

The ENC series of enclosures are simpleboxes with window covers for mounting 1/16DIN (All 1600 series) or 1/4 DIN (2104, 2110,3101, 3340, 3380) Controllers. (Controllersnot included.) The NEMA 7/4 enclosures arerugged sand-cast aluminum designed for NECClass I, Division I & Division II, Groups B, C, &

StockModel Description Status PCN

ENC7-QTRW0 NEMA 7/4 8”H x 8”W x 8”D* NS 317964

D and Class II, Division I & Division II, GroupsE, F, & G. Includes a 5” Window, breather/drainvalve, and (3) each 1/2”NPT conduit openings.ENC7s are suitable for one 1/4 DIN controller orup to (2) 1/16 DIN controllers. Mounting Platesare ordered separately (see accessory tablebelow).

* 1/4 and 1/16 DIN Mounting Plates Sold Separately

Controls

H-71

CONT

ROLL

ERAC

CESS

ORIE

S

Chromalox

Chromalox

TEMP CONTROL

OVERTEMP

Features

• High impact strength, high temperatureplastic

• Heat Resistant up to 266°F (130°C)

• NEMA 4 Protection

• Supplied with 2 keys

NEMA 4 Protection

Protects Two 1/4 DIN PanelMounted Instruments Against:

• Mechanical Damage

• Unauthorized Operation

• Dust and Splashwater

Dimensions7.3

(184)

1.8(45)

11.9(301)

Front View SideView

Super Splash GuardInstrument CoverModel 0076-12034

Description Part Number PCN

Splash-Guard 0076-12034 321939

Ordering InformationAll Dimensions in Inches (mm)

Note: Controllers not included.

Splash GuardInstrument Cover

Protects 1/4 DIN Panel MountedInstruments Against:

• Mechanical Damage

• Unauthorized Operation

• Dust and Splashwater

Dimensions

All Dimensions in Inches (mm)

1.3(34)

1.5(39)

Front View Side View

Note: Controllers not included.

Features

• High impact strength, high temperatureplastic

• Heat Resistant up to 266°F (130°C)

• Protection to DIN 40050, dust-tight andsplashproof IP54

• Supplied with 2 keys

• Use with models 3901, 3340, 3380, 2030and 2040

Description Part Number PCN

Splash-Guard 0148-00012 314421

Ordering Information

4.8(122)

4.6(116)

2.6(66)

4.3(110)