IntroductionTeledyne LeCroy's PCIe to M.2 Socket 3 Adapter for PCI Express 3.0 cards provide developers with an extremely versatile tool to speed development of new M.2 designs and to trouble-shoot existing M.2 issues.

PCIe to M.2 Socket 3 Adapter for PCI Express 3.0 Card (Supports M-Key andhybrid B/M Key Devices)

PCIe to M.2 Socket 3 Adapter for PCI Express 3.0 Supports M-Key and hybrid B/M Key User Manual and Quick Start Guide

Use this document for quick installation and setup. If you experience problems or need more information, see the product manuals available at the Teledyne LeCroy web site or in the Documents folder in the PCIe Protocol Suite installation DVD.

1

ComponentsThe Teledyne LeCroy PCIe to M.2 Socket 3 Adapter for PCI Express 3.0 kit has the following components:

• M.2 Socket 3 Adapter card (Supporting M-Key and hybrid B/M Key Devices)

• Power supply 12V @ 3A

• User Manual and Quick Start Guide (this document)

Inspect the received shipping container for any damage. Unpack the container and account for each of the system components listed on the accompanying packing list. Visually inspect each component for absence of damage. In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

The adapter can be used with a standard Teledyne LeCroy PCIe interposer and Teledyne LeCroy analyzer to capture all PCIe data traffic passing through the interface, allowing visibility to virtually all types of protocol problems that may affect device performance or reliability.In addition, if an M.2 host port is available, Teledyne LeCroy offers specialty interposers designed for M.2 devices that can be used as a direct traffic probe and analysis tool with any of our Summit™ product family of analyzers.

2

InstallationInsert DUT into the M.2 connector on the adapter and secure with nut and standoff. The standoff has a nut on the bottom side which can be removed by hand or with a nut driver (see drawings on next two pages).

Once the DUT is properly installed in the adapter you can plug the adapter in to a PCIe slot.

3

Exploded View

Installed Side Profile

Installed

Connections4M.2 Socket 3 Adapter Interconnection Overview

Power Selection Switches SW2, SW3

(DUT) Support Bracket

The DUT support bracket allows mounting of M.2 devices of 42, 60, 80 and 110 mm through use of a moveable standoff and screw.

12V DC Power Supply (included)

Sideband Signals Header J3This header provides access to sideband signals from the M.2 connector.

Presence Control Switch Array SW1These control switches allow the user to specify the maximum lane width to be used (x1 or x4).

x4 PCIe Slot Connector

HOST PCIeSlot x4 or larger

Device Under Test(DUT)

ConfigurationUse the tables below to configure the adapter for specific test situations.

SW1 Device Presence Table

SW2 Power Selection Table

SW3 Power Selection Table

Notes:• If using External Source, External DC Jack option must be

selected for both SW2 and SW3.

• If using Host Source, Host option must be selected for both SW2 and SW3.

SW1.1 SW1.2 Presence Declared

ON ON Reserved

ON OFF X1 Device

OFF ON X4 Device

OFF OFF Reserved

SW2 Position 12V Power to Regulator

12V EXT From J4 DC Jack

12V HOST From PCIe Bus 12V

SW3 Position 3.3V Power to DUT

3.3V EXT From J4 regulated down to 3.3V

3.3V HOST From PCIe Bus 3.3V

5

J3 Header Table (pin out M-key adapter)

Pin No.

Termination Pin No.

Signal Name Pin No.

Termination

A1 NC B1 NC C1 NC

A2 NC B2 NC C2 NC

A3 NC B3 NC C3 NC

A4 1KPull down B4 NC_PIN36 C4 4.7KPull-up to 3.3V

A5 1KPull down B5 NC_PIN34 C5 4.7KPull-up to 3.3V

A6 1KPull down B6 NC_PIN32 C6 4.7KPull-up to 3.3V

A7 1KPull down B7 NC_PIN30 C7 4.7KPull-up to 3.3V

A8 NC B8 NC C8 NC

A9 1KPull down B9 NC_PIN6 C9 4.7KPull-up to 3.3V

A10 NC B10 NC C10 NC

A11 NC B11 NC C11 NC

A12 1KPull down B12 NC_PIN26 C12 4.7KPull-up to 3.3V

A13 1KPull down B13 NC_PIN28 C13 4.7KPull-up to 3.3V

A14 1KPull down B14 NC_PIN24 C14 4.7KPull-up to 3.3V

A15 1KPull down B15 NC_PIN22 C15 4.7KPull-up to 3.3V

A16 1KPull down B16 NC_PIN20 C16 4.7KPull-up to 3.3V

A17 1KPull down B17 NC_PIN48 C17 4.7KPull-up to 3.3V

A18 1KPull down B18 NC_PIN46 C18 4.7KPull-up to 3.3V

A19 1KPull down B19 NC_PIN44 C19 4.7KPull-up to 3.3V

A20 NC B20 NC C20 NC

A21 NC B21 NC C21 NC

A22 1KPull down B22 NC_PIN67 C22 4.7KPull-up to 3.3V

A23 1KPull down B23 DEVSLP C23 4.7KPull-up to 3.3V

A24 1KPull down B24 DISK_ACTIVITY C24 4.7KPull-up to 3.3V

A25 1KPull down B25 NC_PIN8 C25 4.7KPull-up to 3.3V

A26 NC B26 NC C26 NC

A27 1KPull down B27 PEDET C27 4.7KPull-up to 3.3V

A28 NC B28 NC C28 NC

A29 NC B29 NC C29 NC

A30 GND B30 NC C30 3.3V

Copyright© 2014 Teledyne LeCroy, Inc. All rights reserved. Part Number: 923900-00 Rev D This document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.

Trademarks and ServicemarksTeledyne LeCroy, PCIe Protocol Suite, PCIe Protocol Analysis and Summit are trademarks of Teledyne LeCroy. All other trademarks are property of their respective companies.

ChangesProduct specifications are subject to change without notice.Teledyne LeCroy reserves the right to revise the information in this document without notice or penalty.

Teledyne LeCroy Customer Support

Online Download

Periodically check the Teledyne LeCroy Protocol Solutions Group web site for software updates and other support related to this product. Software updates are available to users with a current Maintenance Agreement.

Web: teledynelecroy.com/tm/software/PCIeE-mail: psgsupport@teledyne.comSupport: teledynelecroy.com/support/contact

Environmental Conditions

• Temperature: Operating 32° F to 122° F (0° C to 50° C) • Temperature: Non-Operating 14° F to 176° F (-10° C to 80° C)• Humidity: Operating 10% to 90% RH (non-condensing)

6