IntroductionTeledyne LeCroy's PCIe to M.2 Socket 2 Adapter for PCI Express 3.0 cards provide developers with an extremely versatile tool to speed development of new M.2 designs and to trouble-shoot existing M.2 issues.

PCIe to M.2 Socket 2 Adapter for PCI Express 3.0 (Supports B-Key and hybrid B/M Key Devices)

PCIe to M.2 Socket 2 Adapter for PCI Express 3.0 Supports B-Key and hybrid B/M KeyUser Manual and Quick Start Guide

Use this document for quick installation and setup. If you experience problems or need more information, see the product manuals available at the Teledyne LeCroy web site or in the Documents folder in the PCIe Protocol Suite installation DVD.

1

The adapter can be used with a standard Teledyne LeCroy PCIe interposer and Teledyne LeCroy analyzer to capture all PCIe data traffic passing through the interface, allowing visibility to virtually all types of protocol problems that may affect device performance or reliability.In addition, if an M.2 host port is available, Teledyne LeCroy offers specialty interposers designed for M.2 devices that can be used as a direct traffic probe and analysis tool with any of our Summit™ product family of analyzers.

2 ComponentsThe Teledyne LeCroy PCIe to M.2 Socket 2 Adapter for PCI Express 3.0 kit has the following components:

• M.2 Socket 2 Adapter card (Supporting B-Key and hybrid B/M Key devices)

• User Manual and Quick Start Guide (this document)

Inspect the received shipping container for any damage. Unpack the container and account for each of the system components listed on the accompanying packing list. Visually inspect each component for absence of damage. In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

InstallationInsert DUT into the M.2 connector on the adapter and secure with nut and standoff. The standoff has a nut on the bottom side which can be removed by hand or with a nut driver (see drawings on next two pages).Once the DUT is properly installed in the adapter you can plug the adapter in to a PCIe slot.

3

Exploded View

Installed Side Profile

Installed

Connections4M.2 Socket 2 Adapter Interconnection Overview

Sideband Signals Header J12

(DUT) Support Bracket

The DUT support bracket allows mounting of M.2 devices of 42, 60, 80 and 110 mm through use of a moveable standoff and screw.

Sideband Signals Header J3This header provides access to sideband signals from the M.2 connector.

Presence Control Switch Array SW1These control switches allow the user to specify the maximum lane width to be used (x1 or x2).

x4 PCIe Slot Connector

HOST PCIeSlot x4 or larger

Device Under Test(DUT)

ConfigurationUse the tables below to configure the adapter for specific test situations.

SW1 Device Presence Table

J12 Header Table (pin out B-key adapter)

Test Points Table

SW1.1 SW1.2 Presence Declared

ON ON Reserved

ON OFF X1 Device

OFF ON X2 Device

OFF OFF Reserved

Pin No.

Termination Pin No.

Signal Name Pin No.

Termination

A1 1KPull down B1 UIM_PWR C1 0Pull-up to 1.8V

A2 1KPull down B2 UIM_DATA C2 4.7KPull-up to 1.8V

A3 1KPull down B3 UIM_CLK C3 4.7KPull-up to 1.8V

A4 1KPull down B4 UIM_RESET C4 4.7KPull-up to 1.8V

A5 NC B5 NC C5 NC

Test Point Signal Name

TP1 SUSCLK

TP21 USB_D-

TP22 USB_D+

5

J3 Header Table (pin out B-key adapter)

Pin No.

Termination Pin No.

Signal Name Pin No.

Termination

A1 1KPull down B1 COEX_1 C1 4.7KPull-up to 1.8V

A2 1KPull down B2 COEX_2 C2 4.7KPull-up to 1.8V

A3 1KPull down B3 COEX_3 C3 4.7KPull-up to 1.8V

A4 1KPull down B4 ANTCTL3 C4 4.7KPull-up to 1.8V

A5 1KPull down B5 ANTCTL2 C5 4.7KPull-up to 3.3V

A6 1KPull down B6 ANTCTL1 C6 4.7KPull-up to 1.8V

A7 1KPull down B7 ANTCTL0 C7 4.7KPull-up to 1.8V

A8 1KPull down B8 SIM_DETECT C8 4.7KPull-up to 1.8V

A9 1KPull down B9 Full_Card_Power_Off# C9 4.7KPull-up to 3.3V

A10 1KPull down B10 GPIO_12 C10 4.7KPull-up to 1.8V

A11 1KPull down B11 GPIO_11 C11 4.7KPull-up to 1.8V

A12 1KPull down B12 GPIO_10 C12 4.7KPull-up to 1.8V

A13 1KPull down B13 GPIO_8 C13 4.7KPull-up to 1.8V

A14 1KPull down B14 GPIO_7 C14 4.7KPull-up to 1.8V

A15 1KPull down B15 GPIO_6 C15 4.7KPull-up to 1.8V

A16 1KPull down B16 GPIO_5 C16 4.7KPull-up to 1.8V

A17 1KPull down B17 GPIO_4 C17 4.7KPull-up to 1.8V

A18 1KPull down B18 GPIO_3 C18 4.7KPull-up to 1.8V

A19 1KPull down B19 GPIO_2 C19 4.7KPull-up to 1.8V

A20 1KPull down B20 GPIO_1 C20 4.7KPull-up to 1.8V

A21 1KPull down B21 GPIO_0 C21 4.7KPull-up to 1.8V

A22 1KPull down B22 RESET# C22 4.7KPull-up to 1.8V

A23 1KPull down B23 DEVSLP C23 4.7KPull-up to 3.3V

A24 1KPull down B24 DISK_ACTIVITY C24 4.7KPull-up to 3.3V

A25 1KPull down B25 W_DISABLE# C25 4.7KPull-up to 3.3V

A26 1KPull down B26 CONFIG_0 C26 4.7KPull-up to 3.3V

A27 1KPull down B27 CONFIG_1 C27 4.7KPull-up to 3.3V

A28 1KPull down B28 CONFIG_2 C28 4.7KPull-up to 3.3V

A29 1KPull down B29 CONFIG_3 C29 4.7KPull-up to 3.3V

A30 GND B30 LSV C30 3.3V

Copyright© 2014 Teledyne LeCroy, Inc. All rights reserved. Part Number: 923936-00 Rev DThis document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.

Trademarks and ServicemarksTeledyne LeCroy, PCIe Protocol Suite, PCIe Protocol Analysis and Summit are trademarks of Teledyne LeCroy. All other trademarks are property of their respective companies.

ChangesProduct specifications are subject to change without notice.Teledyne LeCroy reserves the right to revise the information in this document without notice or penalty.

Teledyne LeCroy Customer Support

Online Download

Periodically check the Teledyne LeCroy Protocol Solutions Group web site for software updates and other support related to this product. Software updates are available to users with a current Maintenance Agreement.

Web: teledynelecroy.com/tm/software/PCIeE-mail: psgsupport@teledyne.comSupport: teledynelecroy.com/support/contact

Environmental Conditions

• Temperature: Operating 32° F to 122° F (0° C to 50° C) • Temperature: Non-Operating 14° F to 176° F (-10° C to 80° C)• Humidity: Operating 10% to 90% RH (non-condensing)

6