PCD7.D763 displays a black screen or is frozen, it has lost the
calibration!
Solution The boot and the firmware need to be updated! If it
isn't possible to force the display in transfer mode (download
mode) it is necessary first to
recalibrate the screen following the description. See FAQ 100868
(see link below)! All displays produced since 16/07/2010 have the
new boot! Procedure
to update boot and firmware If you use PCD8.D81W software
version 5.22 skip to point 4 directly or point 5 if the display has
already a new boot:
Download the files attached to this FAQ and unzip the
archives.Copy the bootloader files "BT525MTF.FIL" into the
following folder: "C:Program
FilesSAIAPCD8.D81W_51x\boot\" Copy the firmware files
"VT525W.BIN" into the following folder: "C:Program
FilesSAIAPCD8.D81W_51x\firmware\" The
boot has to be sent via the bootloader download utility. In
PCD8.D81W (programming tool; select the menu TOOLS / BOOT
UPDATE-AUTOMATIC), enter
the password 371013 and follow the instructions. Open the
project, compile it again and download it to the panel and active
the download option "Update
operating unit firmware". Remark: during the download the Boot
version is desplayed: version 3.9! When the download has finished,
after a powerup of
the panel, please verify that the new firmware version is - 1.13
for PCD7.D763 Remark Please note that the PCD8.D81W version 5.22
CONTAINS this new
boot and FW version! It can be downloaded with this link:
sbc-support.ch/download/pcd8_d81w_v5_22.zip It is mendatory to use
this new FW only on
panel having this new boot!
faq
http://www.sbc-support.com/en/faq/pcd7d763_displays_a_black_scre...
1 sur 1 14/06/2014 16:51
AHMEDTexte surlign
AHMEDTexte surlign
AHMEDTexte surlign
