Papers Published in National/International Journals

Papers Published in National/International Journals

Title of paper Name of the

author/s

Depament of the

teacher Name of journal

Year of

publication ISBN/ISSN number

Design and Fabrication of Semi-

Automatic Dish & Utensil

Washing Machine

Dr. C.C. Handa Mechanical International Journal for Scientific

Research & development 2016 ISSN No-2321-0613

Design and Fabrication of Machine

for Tire removing and Fitting on

the rim of wheel


Research & development 2016 ISSN No-2321-0613

Fabrication of Semi Automatic

Dish & Utensil Washing Machine Dr. C.C. Handa Mechanical

International Journal of Engineering

Development and Research 2016 ISSN No-2321-9939

Design & Fabrication of Coconut

De-Shelling Machine Dr. C.C. Handa Mechanical

International Journal for Scientific

Research & Development (IJSRD) 2016 ISSN No-2321-0613

Design & Fabrication of Coconut

De-Shelling Machine Dr. C.C. Handa Mechanical

International Journal for Engineering

Development & Research (IJEDR), 2016 ISSN No-2321-9939

”Critical Analysis of Job

Satisfaction in Service Industry-A

Review "

Dr. C.C. Handa Mechanical International Journal of Engineering

Research and General Science 2016 ISSN-2091-2730.

"A Real Time Design and

Development of Fixture for

Unloading of Control Assembly in an Industry"


Research & Development 2016 ISSN No-2321-0613

"A Realistic Approach of Fixture

for Unloading of Control Valve

Assembly Using Pneumatic

Cylinders"

Dr. C.C. Handa Mechanical International Journal for Innovative

Research in Science & Technology 2016 ISSN No 2349-6010

“Performance Evaluation of Solar

Tunnel Dryer for Drying Red

Chilli using Taguchi L27

Orthogonal Array

Dr. S. K.

Choudhary Mechanical

International Journal of Scientific

Research in Science Engineering and

Technology Vol. 2, Issue 3

Vol. 2, Issue

3,2016

Optimization of Process

Parameters of Solar Tunnel Dryer

for Drying Red Chilli using Taguchi Method And Grey

Relational Analysis

Dr. S. K.


Journal of Basic and Applied Research

International, International Knowledge Press, Vol. 18, Issue 1

Vol. 18,

Issue 1,2016

Planning of experimentation for

performance evaluation of Porous

Media Heat Exchanger

Dr. S. K.


International Journal of Mechanical

Engineering Research

”,. Volume

6, Number 1

(2016),

ISSN 2249-0019

Development of Heat Transfer

model for Porous Material Heat

Exchanger using Dimensional

Analysis”

Dr. S. K.



Research and Technology (IJERT), ISSN 0974 –3154.

Performance analysis of porous

material heat exchanger using

artificial Neural networks”

Dr. S. K.



Research and Technology (IJERT), 2016 ISSN 0974 –3154.

Experimental investigation for

optimization of flow rate in heat

pipe assisted latent heat thermal

storages”, (Review process is over

awaited for publication in

ELSEVIER material today

proceedings)

Dr. S. K.

Choudhary Mechanical ELSEVIER material today proceedings 2016

Experimental investigation for the optimization of heat pipe

performance in latent heat thermal

storage”, (Review process is over

awaited for publication published

by spinger)

Dr. S. K.


Journal of mechanical science and

technology (JMST) 2016

Experimental Study of Heat Pipe Performance in LHTES with Effect

of Fill Ratio

Dr. S. K.


International Journal of Innovative Research in Science Engineering and

Technology

Vol. 5, Issue 12,

December

2016,

20239-21246

Experimental investigation for

optimization of flow rate in heat

pipeassisted latent heat thermal

storages”,

Dr. S. K.


International conference on

advancement in aeromechanical

materials for manufacturing

July 2016.

Design and Analysis of

Honeycomb Sandwish Panels for

Boat- Conclusion and Future

Scope of Work” ,

Dr. S. K.



Research & Development

Vol. 4, issue

05, July

2016

ISSN (Online 2321-

0613).



Boat- Review Study”

Dr. S. K.




Vol. 4, ,

Issue 05,

July 2`016

ISSN (Online 2321-

0613).



Boat-Result and Discussion” ,

Dr. S. K.




Vol. 4, issue

05, July

2016

ISSN (Online 2321-

0613).

“Design and Analysis of


Boat-Hand Calculation,

Dr. S. K.




Vol. 4,

issue 05,

July 2016

ISSN (Online 2321-

0613).

Evaluation of frequency excitation

of helical suspension spring using

finite element analysis

Dr. A. V. Vanalkar Mechanical International journal in computer added

engg and technology ,vol 9,issue 4 2017

Modification in roller profile of

roller bearing to avoid unwanted

failure

Dr. A. V. Vanalkar Mechanical International journal for scientific

research and development,vol 4,issue 8 2016 2321-0613

Improving the load carrying

capacity of cylindrical roller used

in bearing by changing its profile

Dr. A. V. Vanalkar Mechanical International journal for scientific

research and development,vol 4,issue 8 2016 2321-0613

Design and analysis of a proposed

cylindrical roller use in bearing Dr. A. V. Vanalkar Mechanical

International Journal for research in emerging science and technology vol3

issue 7

2016 2349-7610

Estimation of Stress concentration

factor for different crack length on

plate under compressive loading

Dr. A. V. Vanalkar Mechanical International journal for science

research and technology vol 3 issue 2 2016 2349-6010

Estimation of maximum stress and

stress conc factor for crack model

using circular polariscope


research and development vol 4 issue 4 2016 2321-0613

Study and analysis of various

loading condition on turbine shaft-

an approach

Dr. A. V. Vanalkar Mechanical International jornal for science research

and development 2016 2250-1371

Design and analysis of turbine

shaft Dr. A. V. Vanalkar Mechanical

International jornal for science research

and development 2016 2250-1371

Stress and strain determination on

HP Turbine shaft result and

discussion



Estimation of stress and strain

using FEM analysis for mechanical

load on steam turbine shaft



Occupational Safety Improvements

by Lean Six Sigma Methodologies

in a Manufacturing Industry

Dr. A. C.

Waghmare, Dr. R.

H. Parikh, P. R.

Gajbhiye

Mechanical IJLTEMAS 2016 2278-2540

Applications of Lean Six Sigma

Methodologies for Improvement in

Industrial Safety

Dr. A. C.

Waghmare, Dr. R.

H. Parikh, P. R.

Gajbhiye

Mechanical IJIRST 2016 2349-6010

Formulation of Artificial Neural Network Model for Correlating the

Factors Responsible for Industrial

Accidents with Severity of

Accidents and Man Days Lost by

using MATLAB

Dr. A. C.

Waghmare, Dr. R.

H. Parikh, P. R.

Gajbhiye

Mechanical IJIRST 2016 2349-6010

Formulation of M.L.R Model for

Correlating the Factors

Responsible for Industrial Accidents with Severity of

Accidents and Man Days Lost by

Using XLSTAT

Dr A C Waghmare, Dr R H Parikh, P R

Gajbhiye3

Mechanical IJERA 2016 2248-9622

“Review on Development of

Mathematical Model for Vacuum

Damped Recoil System”

Dr. S. R. Ikhar Mechanical International Journal for Scientific

Research & Development ,2017

ISSN(online):2321-

0613.

“Innovative methods of Modeling

Gear Faults”, International Journal

of Mechanical Engineering and Robotics Research (RIP), Vol.2,

Issue

Dr. S. R. Ikhar, Dr.

A. V. Vanalkar, Prashant Bagde

Mechanical

”, International Journal of Mechanical

Engineering and Robotics Research (RIP),

2017 ISSN 2278-0149

Experimentation of Thermoelectric

Refrigerator using Solar Energy for

Cold Storage Application

Vivek Vaidya Mechanical International Journal for Scientific

Research & Development 2017

ISSN (online): 2321-

0613

Design & Fabrication of

Automated Trolley Working on Cellular Frequency

Dr. V. B. Vaidya Mechanical International Journal for Scientific

Research & Development 2017


0613

Design and Implementation of

Automated Dr. V. B. Vaidya Mechanical Engg

Imperial Journal of Interdisciplinary

Research (IJIR) 2017 ISSN: 2454-1362

Enhancement of Heat Transfer In

Solar Flat Plate Collector Using

Wind Shield – An Experimental Study

Dr. V. B. Vaidya Mechanical Engg

International Journal of Scientific

review and research in engineering and

technology

2016 ISSN : 2455-3603

Investigation of Heat Transfer

Enhancement for Natural

Convection through Porous Carbon

Foam

Dr. V. B. Vaidya Mechanical Engg

International Journal of Latest

Technology in Engineering,

Management & Applied Science

(IJLTEMAS)

2016 ISSN 2278-2540

Design and fabrication of vehicle

ignition control by Helmet S. G. Bawane Mechanical Engg

International Journal for Innovative

research in Science and Technology ISSN-2349-6012

Design and fabrication of solar

based multipurpose agriculture

machine

S. G. Bawane Mechanical Engg International Journal for research and

development in Technology 2017 ISSN-2349-3585

Design and Fabrication of

Manually Operated Rice Plantery

Machine

V. D. Dhopte Mechanical Engg International Journal for Research &

Development in Technology (IJRDT)

Volume-7,

Issue-3,

March 2017

ISSN NO: 2349-3585

Fabrication Of Semi-Automatic

Dish And Utensil Washing

Machine

V. D. Dhopte Mechanical Engg International Journal of Engineering

Development and Research (IJEDR)

Volume 4,

Issue 3,

2016

Design and Development of Semi-

automatic dish washer and its

comparison with Automatic dish washer

V. D. Dhopte Mechanical Engg

International Journal for Research in

Applied Science & Engineering Technology (IJRASET)

Volume 4

Issue XII,

December 2016

Review of Recent advancement in

the technologies of turbine blade

cooling

Kunal D.Gadgil Mechanical

Department IJRISE 2016 ISSN 2394-E299

“A Review On Design &

Fabrication Of Multi Utility

Wheelchair”

Ajinkya S. Hande Mechanical

IJIRST –International Journal for

Innovative Research in Science &

Technology

March.2017.


automatic corn separator machine M.S.SHELKE Mechanical IJARIIE 2017 2395-4396

Design of Voice Operated Material

Handling System

Er. Monica

Nagardhane Mechanical


Research and Developement (IJSRD) 2016

Analysis of factors influencing lean principles adoption in

healthcare sector using Interpretive

Structural Modeling approach: A

Case study

Dr. Vinodh S; K J,

Manjunatheshwara;

Yeldi, Tirumalesh ;

Yerwar Sagar

Mechanical International Journal of Production

Research

Under

review

Performance Analysis of 4 Stroke

Hybrid (Petrol +Water) Test Rig

Bhupesh D. Sarode

Harshit Sadarang Mechanical Engg Journal for Research

Volume 03|

Issue 01 |

March 2017

2395-7549

Research on Automatic Air Filter

Cleaning System

Bhupesh D. Sarode

Mahesh A.

Meshram Swapnil

M. Dhok

Mechanical Engg Journal of Network Communications

and Emerging Technologies (JNCET)

Volume 7,

Issue 3,

March

(2017)

A Review of Design and

Modelling of Prosthetic Leg

Bhupesh D. Sarode,

Digambar Dindayal

Badole, Dr. S. K.

Choudhary

Mechanical Engg IJSRD - International Journal for

Scientific Research & Development

Vol. 5, Issue

02, 2017 2321-0613

Design and Modelling of Existing

Prosthetic Leg

Bhupesh D. Sarode,

Digambar Dindayal

Badole, Dr. S. K.

Choudhary



Vol. 5, Issue

02, 2017 2321-0613

Design and Modelling of Modified

Prosthetic Leg

Bhupesh D. Sarode,

Digambar Dindayal

Badole, Dr. S. K.

Choudhary



Vol. 5, Issue

05, 2017 2321-0613

Experimental and numerical study

of condensation using additives on copper surface for heat transfer

enhancement

V. G. Choudhari, A. R. Acharya, Dr.

A. T. Pise

Mechanical Engg International Education and Research

Journal

Special Issue 3 Page 330-

338, 2016

2395-1621

Generalized Methodology of synthesis of four Bar Mechanism

Dr.C.C. Handa Mechanical International Journal of Mechanical Engineering and Robotics Research

(IJMERR)

2014 issn:2278-0149

Methodology for Production of

Earthen Pot Making – A Review Dr.C.C. Handa Mechanical IJSRD 2014 ISSN No-2321-0613

Design of Mechanism for Specific

Profile on Earthen Pot Making Dr.C.C. Handa Mechanical IJIRST 2014 ISSN No 2349-6010

Design Consideration for Specific

Profile on Earthen Pot Making Dr.C.C. Handa Mechanical IJSRD 2014 ISSN No-2321-0613

Performance Based Tolerance

Scheme for Mechanism Dr.C.C. Handa Mechanical

Journal of Engineering And

Technology Research 2014 ISSN: 2006-9790


Groundnut Sheller Machine Dr.C.C. Handa Mechanical IJIRST

Vol. 1, Issue

7, December

2014

ISSN No 2349-6010

Design Consideration of

Groundnut Sheller Machine Dr.C.C. Handa Mechanical IJIRST

Vol. 1, Issue

4,

September

2014

ISSN No 2349-6010

Automatic Tyre Inflation System Dr.C.C. Handa Mechanical Golden Research Thought 2014 • ISSN No 2231-

5063

CAN or Plactic Bottle Crusher

Machine – A Review Design and

Fabrication of Organic Fertilizer

and Pesticides sprayers”.

Dr. S.K.Choudhary Mechanical International Journal for scientific


Vol 2,

issue02

April 2014

ISSN (Online 2321- 0613

Design and Consideration is an

Automatic CAN/ Plactic Bottle

Crusher Machine”

Dr. S.K.Choudhary Mechanical International Journal of Engineering

Research and General Science

Vol2 issue 4

Jun – July

2014

ISSN 2091 -2730

“ Experimentation and Analysis of

an Automatic CAN/Plactic Bottle

Crusher Machine

Dr. S.K.Choudhary Mechanical International Journal for Innovative

Research in Science & Technology

” Vol1, issue

2 July 2014 ISSN (Online) 2349-6010

An Automatic Approach for

CAN/Plactic Bottle Crusher

Mache”

Dr. S.K.Choudhary Mechanical International Journal OF Research in

Aeronatical and Mechanical Engieerjng

vol.2 issue 7

july 2014 ISSN (online 232 : 5051

“Design, Fabrication and

Performance Evaluation of

Polisher Machine of Mini Dal

Mill”

Dr.S.R.Ikhar, Dr.

A. V. Vanalkar, S.

H. Bagde

Mechanical International Journal of Engineering

Research And General Science

Volume.2,

Issue 5,

August –

September

2014

ISSN-2091-2730

, “An Automatic Can or Plastic

Bottle Crusher Machine- A

Review” Published in E-Journal

V. Kshirsagar, A. P.

Ninawe, Dr. S. K.

Choudhary

Mechanical

1. International Journal for


(IJSRD)

Vol. 2, Issue

2, in April

2014

“Design Consideration in an

Automatic Can/Plastic Bottle

Crusher Machine” Published in

International Journal of

Engineering Research and General

Science


Ninawe, Dr. S. K.

Choudhary,

Mechanical International Journal of Engineering

Research and General Science (IJERSJ 2014

“An Automatic Approach for

Can/Plastic Bottle Crusher

Machine”

V. Kshirsagar,A. P.

Ninawe, Dr. S. K.

Choudhary,

Mechanical

International Journal of Research in

Aeronautical and Mechanical

Engineering (IJRAME),

2. Vo. 2,

Issue7, July

2014.

ISSN: 2321-3051

, “Experimentation and Analysis of

an Automatic Can/Plastic Bottle

Crusher Machine


Ninawe Mechanical

” published in e-journal, International

Journal for Innovative Research in

Science & Technology (IJIRST)

Vol1 issue 2

july 14

“Methodology For Design &

Fabrication Of Portable Organic

Wastechopping Machine- A

Review”

Ajinkya S. Hande , Mechanical

IJIRST –International Journal for

Innovative Research in Science &

Technology

December

2014.


6010

Estimating The Error Of Field

Variable For Numerical Approximation Techniques Using

Mat Lab

D.B. KAWADKAR Mechanical In International Journal Of Mechanical

Engineering And Robotic January 2014.

Research.ISSN 2278-0149, Vol.3, No. 1,

Analysis of Herringbone Gear and

Methodology for calculation of

force acting on it in hot rolling

process

M.S.SHELKE Mechanical IEEE Apr-14 978-1-4799-3759-

2/14/$31.00©2014 IEEE

Herringbone gear analysis and

calculation of forces acting on it in

Hot Rolling process

M.S.SHELKE Mechanical IJPRET Mar-14 2319-507X

Methodology for calculation of

rolling load and forces acting on it

in Hot rolling Process

M.S.SHELKE Mechanical IJRAME Jan-14 2321-3051

DESIGN OF AUTOMATIC

TYRE INFLATION SYSTEM

Hemant Soni,

Pratik Golar, AshwinKherde

Instructor :-P. R.

Gajhbhiye and Er.

S. D. Thakre

Mechanical Industrial Science .4/April.

2014 ISSN : 2347-5420

Design Consideration For Specific

Profile On Earthen Pot Making

Roshan R. Shrirao1

Dr. C. C. Handa2

Sanket D.Thakre3

Mechanical - International Journal for Scientific

Research & Development 06, 2014


0613

Design of Draw Die for Side Panel

of Vehicle Dr.C.C. Handa Mechanical


Research & Technology (IJERT) 2013 ISSN: 2278-0181

Design Considerations For Redial

Adjustable Belt Conveyor System Dr.C.C. Handa Mechanical


Engineering and Robotics Research

(IJMERR)

2013 issn:2278-0149

Design Procedure of Overhead

Monorail for Material Handling

System for Processing Industry

Dr.C.C. Handa Mechanical


Engineering and Robotics Research

(IJMERR)

2013 issn:2278-0149

A Generalized Design Approach

for Hydraulic Ram Pump; A

Review

Dr.C.C. Handa Mechanical International Journal of Engineering &

Science Research(IJESR ) 2013

• e-ISSN 2277-

2685,

Computer Aided Generalized

Method of Synthesis of Four Bar

Mechanism

Dr.C.C. Handa Mechanical International Journal of Engineering

Science & Research Technology 2013 • ISSN: 2277-9655

A Generalized Approach for

Providing Effective Tolerance on

A link Planner Mechanism

Considering Pin-joint Tolerance


International Recognized

Multidisciplinary Research

Journal(IRMRJ)

2013 • ISSN No : 2230-

7850

Design of Draw Die for Body Side Panel of Vehicle


Research and Technology 2013 ISSN: 2278-0181

Sensitivity Analysis of Quick

Return Mechanism Dr.C.C. Handa Mechanical


Engineering Research 2013 • ISSN 2249-0019

Design, Development of Overhead

Monorail for Material Handling

System for Food Processing

Industry

Dr.C.C. Handa Mechanical International Journal of Mechanical

Engineering Robotics and Research 2013 issn:2278-0149


Providing Effective Tolerance on a

Link in Planer Mechanism

Considering Pin- Joint Tolerances

Dr.C.C. Handa Mechanical Indian Streams Research Journal 2013 • ISSN No : 2230-

7850

Design Consideration of

Adjustable Height and Radial Belt

Conveyor System


Trends and Technology 2013 • ISSN: 2231-5381.

Design Methodology For

Hydraulic Ram Pump Dr.C.C. Handa Mechanical



Modelling and Simulation of

Overhead Door Closer” Dr. S.K.Choudhary Mechanical

International Journal Mechanical

Engieerjng and Robotics Reaserch

VOL.1 No.

1, oct. 2013. ISSN2278-0149,

Working of New Design of Door

Closer Dr. S.K.Choudhary Mechanical


Engieerjng and Robotics Reaserch

VOL.2 No.

4, oct. 2013. ISSN2278-0149

Design Analysis & Simulation of

Stair Climbing Mechaisum Dr. S.K.Choudhary Mechanical


Engineering & Rob. Res. (IJMERR). 2013 Issn 2278-0149

Synthesis, Modeling & Simulation

of Stair Climbing Mechanisum” Dr. S.K.Choudhary Mechanical

International Journal of Advanced

Research in Engieering (IJARE)

Vol.1

eetecme2013

special issue

october 2013

Synthesis, Modeling, Analysis &

Simulation of Stair Climbing

Mechanisum

Dr. S.K.Choudhary Mechanical


Engieering & Rob. Res. 2013

(IJMERR).

Vol 2 no. 4

october 2013 Issn 2278-0149

Synthesis, Modeling & Simulation

of Stair Climbing Mechanisum Dr. S.K.Choudhary Mechanical


Research & Technology (IJERT)

Vol. 2

issue8,

August –

2013

issn 2278-0181

Parameters Affecting Performance

of DG Power Plant and Engine De-

rating – A Critical Review”, “, ,


Research and Science & Technology

Vol. 2, No.

2, May 2013 ISSN 2319 – 5991,

Thermal Power Plant: Policy

Framework for CO2 Emission

Reduction”



Vol. 2, No.

2, May 2013 ISSN 2319 – 5991

Optimization of Some Aspects for

Sterling Cycle Refrigeration

System”


Vol. II, Issue

7(1), April

2013,

Kinematic Synthesis of a profile

Cutting Mechanism”,), , Dr. S.K.Choudhary Mechanical


Engg. & Robotic Research (IJMERR

Vol. 2, No.

2, Jan 2013 ISSN 2278 – 0149

Synthesis of an Elliptical Profile

Cutting Mechanism Dr. S.K.Choudhary Mechanical


Research & Applications (IJERA

Vol. 2, No.

3, Jan 2013. ISSN 2248 – 9622

Estimation of Stress Concentration Factor & Strain Concentration

Factor in Steam Turbine Blade by

Finite Element Method

Dr. S.K.Choudhary Mechanical International Journal of Mechanical

Engg. & Robotic Research (IJMERR

Vol. 2, No.

3, Jan 2013 ISSN 2278 – 0149

Determination of Stress

Concentration Factor in Steam

Turbine Blade by Finite Element

Method

Dr. S.K.Choudhary Mechanical “” International Journal of Engineering

Research & Applications (IJERA Jan 2013. ISSN 2248 – 9622

“ Mercury in Thermal Power

Plants- A Case Study Dr. S.K.Choudhary Mechanical

International Journal of Pune &

Applied Bioscience 2013 2320-7051

(Al “Thermal Power Plants: Policy Framework for CO2 reduction”, , ,

pp 82-88.

Dr. S.K.Choudhary Mechanical Internation Journal of Engineering

Research & Science & Technology,

Vol.2, Issue-2, August

2013

2319-5991

“An eco-compatible proposition

for small scale industries, Technologist,


Vol. 5(1),

August

2013, pp 12-20.

0975-4946,

Thermal Power Plant – Treatment

efficiency for mercury”, Dr. S.K.Choudhary Mechanical

International Journal of life Science

Biotechnology and Pharma Reaserch

Vol. 2, July

2013: 2250-3137,

State of India Reporting : India on

the forefont”, Dr. S.K.Choudhary Mechanical

Internation Journal of Engineering

Reaserch and Industrial Applications

Vol.6, No-

III( August

2013),

0974-1518,

“ Kinematic Synthesis of a profile

Cutting Mechanism”, Dr. S.K.Choudhary Mechanical


Engg. & Robotic Research (IJMERR),

Vol. 2, No.

2, Jan 2013 ISSN 2278 – 0149,

Generation and comparison of

vibration signature for faulty

gears:A review

Dr. S.K.Choudhary Mechanical Indo american journal of mechanical

engineering vol1,no1, 2013 2321-9416

Innovative methods of modeling

Gear faults Dr. S.K.Choudhary Mechanical

International journal of mechanical

engineering and Robotic rersearch

vol1,no.4

2013 2278-0149

APPLICATION OF SIX SIGMA

TECHNIQUE FOR QUALITY

AND SAFETY IMPROVEMENT

IN A HOT ROLLING

INDUSTRY

Dr A C

Waghmare1, Dr R

H Parikh, P R

Gajbhiye3

Mech. G.J. E.D.T., Vol. 2(3) 2013:8-11 2013 2319 – 7293

FEM Analysis Of Spur Gear Tooth

Vishwjeet V.

Ambade, Prof. Dr.

A.V.Vanalkar, Prof.

P. R. Gajbhiye

Mech. IJERA 2013 2248-9622

DESIGN CONSIDERATION FOR

HOT ROLLED

S E Dhage1*, A V

Vanalkar1 and P R

Gajbhiye1

Mech. IJMERR 2013 22780149

IMPORTANCE OF TRANSFER

MECHANISM OF HOT ROLLED

PRODUCTS IN ROLLING

INDUSTRIES

S.E.Dhage, Dr. A

.V.Vanalka & Prof

P.R.Gajbhiye

Mech. G.J. E.D.T., 2013 2319 – 7293

Experimental Set Up Of Integrated

Bamboo Processing Machine and

Performance

P. G. Mehar, Dr A.

V. Vanalkar, Dr. S.

S. Khandare

Mechanical Engg International Journal of Mechanical

Engineering Research Special 2013 ISSN No. 2249- 0019

Packaging Machine For Food

Industries: A Review

Vivek V Diware ,

P. G. Mehar, Dr. A. V. Vanalkar

Mechanical Engg

Golden Research Thoughts an

International Recognition Research Journals

Aug-13 ISSN 2231- 5063

Bamboo Stripping Machine Using

Pneumatic Pressure

Sufiyan Ahmed

Khan, P G Mehar,

A V Vanalkar, and S S Khandare

Mechanical Engg


Engineering and Robotics

Research(IJMERR)

Oct-13 ISSN 2278- 0149

An Influence of Acoustic Field on

Heat Transfer of Binary Mixture in

Gas – Solid Fluidized Bed

V.B. Vaidyaa, Mechanical Engg International Journal of Applied

Engineering Research, 2013 ISSN 0973-4562

Heat Transfer Study of Binary

Mixture of Group B Particles in the

Gas – Solid Fluidized Bed using

Acoustic field.

V.B. Vaidya, Mechanical Engg International Journal of Mechanics and

Thermodynamics 2013 ISSN 2278-361X

Enhance Production Rate of

Braiding Machine Using Speed

Reduction Technique

Mudra Gondane,

Manoj A.

Kumbhalkar,

Sachin V. Mate,

Sushama Dhote

Mechanical Engg

International Journal on Theoretical

and Applied Research in Mechanical

Engineering (IJTARME)

Volume-2,

Issue-2,

2013

ISSN : 2319 – 3182

A Generalized Approach For Providing Effective Tolerance On

A Link In Planer Mechanism

Considering Pin-joint Tolerances

S. D. Thakre And

Dr.C. C. Handa

Mechanical

Engineering Indian Streams Research Journal Dec-13 ISSN 2230-7850

Controlling Performance Variation

of Planar Mechanism for Providing

Scheme of Tolerance, Using Relative Velocity Method: An

Approach

Dr.C.C. Handa Mechanical International Journal of Engineering Research And Applications (IJERA)

2012 • ISSN : 2248 –

9622

"Computer Aided Modeling and

Position Analysis 0f Crank And

Slotted Leaver Mechanism."



Productivity Analysis Of Manually

Operated And Power Operated

Sheet Bending Machine: A

Comparative Study


Research And Applications (IJERA) 2012

• ISSN : 2248 –

9622

Finite Element Analysis of Steam

Turbine Components for Real Life

Assessment Studies of 210 MW

Steam Turbine

Dr.C.C. Handa Mechanical STM Journals, Trends in Mechanical

Engineering and Technology 2012 • ISSN : 2231-1793

A Generalized Approach for the

measurement of performance of

four bar planar mechanism using

instantaneous Centre method



A Generalized Approach for the

measurement of performance of

four bar planar mechanism using

Relative Velocity method


Research And Applications (IJERA) 2012

• ISSN : 2248 –

9622

Computer Aided Modeling and

Position Analysis of Crank And

Slotted Leaver Mechanism.



Engineering and Production

Engineering Research and

Development

2012 ISSN(Print) : 2249-6890


Kinematic Analysis of Four Bar

Chain Mechanism Using

Programming

Dr.C.C. Handa Mechanical Golden Research Thought 2012 • ISSN No 2231-

5063

Effect of Cooling Tower on

Performance of DG Power Plant” Dr.S.K.Choudhary

International Journal of Engg. Research

& Industrial Applications (IJERIA),

Vol. 5, No.

IV,

November

2012,

ISSN 0974 – 1518,

Design, Synthesis & Simulation of

Four Bar Mechanism for Wheels

for Climbing”,

Dr.S.K.Choudhary Mechanical International Journal of Mechanical

Engg. & Robotic Research (IJMERR),

Vol. 1, No.

2, July 2012. ISSN 2278 – 0149

Analysis and Optimization of

Flywheel” Research. Vol. Dr.S.K.Choudhary Mechanical


Engineering & Robotics 2012 ISSN 2278-0149

Design and and Optimization of

Flywheel-A Past Review Dr.S.K.Choudhary Mechanical

Golden Research Through

International Recognition Research 2012 ISSN No. 2231-5063.

“ Analysis of Low Pressure Steam

Turbine Blade” Dr.S.K.Choudhary Mechanical 2012

Low Pressure Steam Turbine

Blade Analysis” Dr.S.K.Choudhary Mechanical 2012

“ Modeling Aspects of Sterling

Cycle Refrigeration System”

International Journal of Advances

in Management

Dr.S.K.Choudhary Mechanical 2012

“Modeling Aspects of Sterling

Cycle Refrigeration System”

International Conference on

Interdisciplinary Research and

Development in Management

Dr.S.K.Choudhary Mechanical 2012

, “Design and Optimization of

Flywheel- A Part Review”,.

S. Bawane, A. P.

Ninawe, Dr. S. K.

Choudhary

International

Recognition Research

Journal, Golden

Research Thoughts

2012

, “Modelling and Assembly of

Single Plate Friction Clutch of an

Automobile”, , I

A. P. Ninawe, V.

Deshbhratar, P.

Thakre

International

Recognition Research

Journals, ISRJ

ISSN- 2230-7850, March

2012

Experimentation on various dies

for slicing on improved hydraulic

bamboo processing machine

K. G. Ahuja, P. G.

Mehar, Dr. A. V.

Vanalkar, Dr. S. S.

khandare

Mechanical Engg International Journal of Dec-12 ISSN: 2248-9622

Design Optimization & Analysis of

Drive Shaft

Anup Bijagare, P.

G. Mehar, V.

N.Mujbaile

Mechanical Engg VSRD International Journal of

Mechanical Aug-12

e-ISSN : 2249-8303 , p-

ISSN : 2319-2208

Stress Analysis of LPG Cylinder

Using Ansys Software

Laxmikant D.

Rangari, Mrs. P.M.

Zode, P.G. Mehar

Mechanical Engg International Journal of Engineering

Research and Applications (IJERA) Aug-12 ISSN: 2248-9622

Utility of Bamboo in Different Sectors and Development of

Integrated Bamboo Processing

Machine

P. G. Mehar, Dr. A. V. Vanalkar, Dr. S.

S. khandare

Mechanical Engg Golden Research Thoughts an

International Recognition Research

Journals

Sep-12 ISSN 2231-5063

Design and Analysis of Dedicated

Fixture for Multistage special

purpose machine

M. Y. Dakhole,

Prof. P.G. Mehar,

Prof. V.N. Mujbaile

Mechanical Engg International Journal of Engineering

Research and Applications (IJERA)

Sept-Oct

2012 ISSN: 2248-9622

Design and Optimization of

Flywheel-A Past Review S.G.Bawane Mechanical Engg

International Recognition Research

Journal-Golden Research Thought 2012 ISSN-2231-5063

Analysis and Optimization for

flywheel Design S.G.Bawane Mechanical Engg IJMERR 2012 ISSN-2278-0149

Transient thermal analysis of a

steam turbine rotor SP Bhorkar Mech IJERA 2012 2248-9622

AV Vanalkar

Transient Thermal analysis of a

steam turbine rotor without blade

S. P. Bhorkar, Dr.

A V. Vanalkar Mech Golden research thought 2012 2231-5063

“Evaluation Of Stress

Concentration In Plate With Cutout

And Its Experimental Verification

D.B. KAWADKAR Mechanical Engg. In International Journal Of Engineering

Research And Application,

September-

October

2012,

Ø ISSN : 2248-9622,

Vol.2, issue 5, pp. 566-

571.

“Staff Scheduling in Health Care

Systems” Mudra S. Gondane Mechanical Engg

IOSR Journal of Mechanical and Civil

Engineering (IOSRJMCE)

Volume 1,

Issue 6

(July-Aug

2012), PP

28-40

ISSN: 2278-1684

Matrix Converter: An

Understanding Dr. V. Varghese Civil Engg International Lokavishkar e-Journal

Jan-Mar

2012 ISSN 2277-727X

Renewable Energy By Tidal Wave

: An Overview Dr. V. Varghese Civil Engg International Lokavishkar e-Journal 2012

Renewable Energy By Tidal Wave : An Overview

Prof R. V. R. K. Prasad

Civil Engg India Stream Research Journal, 12-Jan ISSN 2330-7850

Experimental Investigation of use

of micro silica in self compacting

concrete

Prof R. V. R. K.

Prasad Civil Engg India Stream Research Journal

25th, 26th

Feb 2012

Rainfall-Runoff Modelling studies

using Artificial Neural Network Dr N. R. Dhamge Civil Engg


Research & Application 12-May

"An Experimental Approch to

Study the Thermofall Velocity of

Particale in Different type of

Fluids"

Dr. D. P. Singh Civil Engg

International Journal in Diversifying

Trends In Technology and

Management,

March-

April 2013

Experimental Investigation on

feasibility of Phospogypsum in

M25 Cement Concrete

Dr. D. P. Singh Civil Engg


Civil Engineering Architecture and

Design

24-25 Jan

2014

"An Experimental Approch to

Study the Thermofall Velocity of Particale in Different type of

Fluids"

Dr. D. P. Singh, Prof.S.R.Satone

Civil Engg

International Journal in Diversifying

Trends In Technology and Management,

24-25 Jan 2014

Effect of Blast Furnace Slag on

Strength of Concrete

Dr. V.Varghese,

Dr. A.M.Badar,

Prof. V.Vaidya

Civil Engg


Engineering, Science and Technologies

– Civil Engineering, (IJREST)

15/04/2015 ISSN 2395-6453.

Seisimic response of structures on

different types of soils.

Dr. Mrs.

N.R.Dhamge Civil Engg

IJSRD (International journal of

Scientific research development) Jul-15

Concrete Cloth & its application Prof.

Mrs.P.S.Randive Civil Engg

International Journal for Engineering

Application & Technology Mar-15 2321-8134

Effect of Blast Furnace Slag on

Strength of Concrete Prof. V.Vaidya Civil Engg


Engineering, Science and Technologies 15/04/2015 ISSN 2395-6453.

Modified Biofilm Reactor system

for Domestic Wastewater

Treatment.

Prof. K.Padwekar Civil Engg nternational Journal for scientific

research & Development (IJSRD) Mar-15 ISSN:23210613,

Fixed film Biological Reactor with

Rotating Paddles. Prof. K.Padwekar Civil Engg

nternational Journal for scientific

research & Development (IJSRD) Mar-15

Nonlinear Static Analysis of

R.C.C. Building by Using

Procedure - A as per ATC- 41

Prof. Y.Bhure Civil Engg Journal of Civil Engineering and

Environmental Technology (JCEET),

April-June

2015

ISSN : 2349-8404 ISSN

: 2349-879X

Seismic response of structures on

different types of soils Dr.N.R.Dhamge Civil Engg

IJSRD International Journal of Science

and research developmen,t01/07/2015 2016

Analysis of multistorey building

with floating column at various

locations

Dr.N.R.Dhamge Civil Engg IJSRD International Journal of Science

and research development,Oct. 2015 2016

Comparative study of

strengthening of R.C. Beam in

flexure using CFRP and GFRP

Prof.D.S.Padole Civil Engg International Journal of Science

technology and Engineering, Jan-2016 2016 2349-784x

Enhancement of rupture strength

using carbon fibre polymer and E-

Glass fibre

Prof.D.S.Padole Civil Engg International Journal of Science

research and development , May-2016 2016

Literature Review on Design

approach of alteration of Two

storeys into Four storey structure

Dr. V.Varghese Civil Engg

International Journal for Scientif

Research & Development ISSN 2321-

0613, Vol-4, Issue 5,July-2016

2016 ISSN 2321-0613

Effect Of Earthquake Forces On

Underground Structure Dr. V.Varghese Civil Engg



ISSN 2319-5991, Aug-2016

2016 ISSN 2319-5991,

“Literature Review On Seismic

Response On Underground

Structure


International Journal of Science &

Engineering Development

Research,ISSN: 2455-2631, Impact

Factor 2.87, Volume 1 Issue 7, pp 164

, July-2016

2016 ,ISSN: 2455-2631

Wind Analysis of Square and Rectangular Geometry

Multistoried Building

Dr. V.Varghese Civil Engg International Journal of Researchin

Engineering and Technology-IJRET ,

June-2016

2016 23191163

Literature Review on Box Girder Bridge Deck with Skew Angle,


International Journal of Science &

Engineering Development Research ISSN 2455-2631, Vol-1, Issue 6, June-

2016

2016 ISSN 2455-2631

Comparision between design and

Analysis of various configuration

of industrial shed

Prof. R.V.R.K

Prasad Civil Engg

Intrnational Journal of Scientific

development and research (IJSDR )

IJSDR 1607035 ISSN 2455-2631, July-

2016

2016 ISSN 2455-2631,

Comparitive study in the analysis

of multistorey R.C.C. Structure by

using different types of concentric

bracing system (by using

softwares)

Prof. R.V.R.K

Prasad Civil Engg


Sciences and research technology

(IJESRT) ISSN 2277-9655, july -2016

2016 ISSN 2277-9655,

Riview paper on caomparitive

study in the analysis of multistorey

R.C.C. Structure using different

trype of concentric bracing system

Prof. R.V.R.K

Prasad Civil Engg


development and research (IJSDR )

IJSDR 16076073 ISSN 2455-2631,

July-2016

2016 ISSN 2455-2631,

Literature Review on analysis of

soft storey multistorey structure

building

Prof. R.V.R.K

Prasad Civil Engg


research and development (IJSRD)

ISSN 2321-0613, July-2016

2016 ISSN 2321-0613

Analysis of soft storey multistoried

structure building

Prof. R.V.R.K

Prasad Civil Engg


Sciences and research technology

(IJESRT) ISSN 2277-9655,July -2016

2016 ISSN 2277-9655

Acomparision of seismic

behaviour on multistoried RC

Building by the provision made in

India Australian buildind codes

Prof. R.V.R.K

Prasad Civil Engg

Intrnational Journal of Science and

Engg. development and research

(IJSDR ) ISSN 2455-2631, July -2016

2016 ISSN 2455-2631,

Analysis of piled raft foundation

using ANSYS Prof. R.Gadpande Civil Engg

International Journal for Innovative

Research in science and

technology,Vol.3, Issue7, Dec-2016

2016

Wind Analysis of Square and Rectangular Geometry

Multistoried Building

V. D. Vaidya, Valsson Varghese,

D. P. Singh

Civil Engg

International Journal of Researchin

Engineering and Technology-IJRET e-

ISSN 23191163/ p-ISSN- 23217308,

Vol-5, Issue 6, pp-460-466, http://ijret.esatjournals.org

/Archive?VI=20160506, Impact factor

3.127, Index Copernicus(IC) Value-

5046 June 2016

2016 ICI ISBN 978-81-

932966-4-6, Page-15

http://esatjournals.net/ijret/2016v05/i06/IJRET20160506081.pdf



Documents

Papers Published in National/International Journals