Papers Published in International / National Journals ... · Papers Published in International / National Journals Department of Civil Engineering 1. Nithya. R, Velumani. A, S.R.R

Papers Published in International / National Journals

Department of Civil Engineering

1. Nithya. R, Velumani. A, S.R.R. Senthil Kumar, “Optimal Location and Proximity

distance of municipal solid waste collection bin using GIS: A Case study of Coimbatore

city”, Issue 4, Vol. 8, pp. 107-119, 2012.

2. R. Nithya, A. Velumani, S.R.R Senthil Kumar, “A Decision Making Tool – Design of

Community Storage System for Sustainable Municipal solid waste management”,

International Journal of Engineering and Technology”, Vol. 5, No. 5, pp. 4234-4240,

2013.

3. Sakthivel, P.B. et al. (2014), "An Experimental Study on Mesh-and-Fiber Reinforced

Cementitious Composites", Concrete Research Letters, Vol.5(1), March 2014, pp.723-739.

4. Sakthivel, P.B. et al. (2014), "Experimental and Predictive Mechanical Strength of

Fiber Reinforced Cementitious Matrix (FRCM)", International Journal of GEOMATE,

Japan, Accepted for Publication in Vol.7(1),13, September 2014, pp.993-1002.

Department of Computer Science & Engineering

1. Ms.Mercy.W, Dr. P. S.K. Patra. An Efficient Processing of Twig Pattern Queries with

Dynamic XML Dissemination. International journal of Advanced Research in Computer

Science & Technology, 2(spl 1), 319-322.

2. Ms.Anees.M, Dr. P. S.K. Patra. Accuracy Enhancement of Mining Association Rules.

International journal of Advanced Research in Computer Science & Technology,

2(spl 1), 335-337.

3. Mr. Kingsly Stephen R, Dr. P. S.K. Patra. An Improved Method for Efficient Data

Transmission in Wireless Sensor Networks. International journal of Advanced Research

in Computer Science & Technology, 2(spl 1), 303-305.

4. Mr.Yuvaraj.R, Dr. P. S.K. Patra. A Secure Content Unobservable on Demand

Routing Protocol for Mobile Ad-hoc Network. International journal of Advanced

Research in Computer Science & Technology, 2(spl 1), 412-416.

5. Mrs. S. Jayanthi, Dr. P. S.K. Patra. Major disease diagnosis and treatment Suggestion

system using data mining techniques. International journal of Advanced Research In

Computer Science & Technology, 2(spl 1), 338-341.

6. Mrs. Jessy Nirmal.A.G, Dr. P. S.K. Patra. Mitigating Vampire Attack in Wireless Ad

hoc Sensor Networks. International journal of Advanced Research in Computer Science

& Technology, 2(spl 1), 306-309.

7. Mr. Kingsly Stephen R, Dr. P. S.K. Patra. An Improved method for Data Gathering in

Wireless Sensor Networks using Mobile Collector. International journal of Advanced

Research in Computer Science & Technology, 2(spl 1), 426-430.

8. Dr. P. S.K. Patra, Capacity Optimization in Manet Using Coco Topology. International

Journal of Emerging Technology & Research, 1(1), 150-154.

9. Dr. P. S.K. Patra. Sfy: Search Engine for you on Android based Smart phones.

International Journal of Emerging Technology & Research, 1(1), 248-252.

10. Mr. Kingsly Stephen R. Data Collection in Wireless Sensor Networks - A Literature

Survey International Journal of Emerging Technology & Research, 1(1), 155-160.

11. Mr. Kingsly Stephen R. A Review on Clustering Algorithms in Wireless Sensor

Networks International Journal of Emerging Technology & Research, 1(1), 146-149.

12. Mr. Yuvaraj.R. A Survey on Secured On-Demand Routing Protocol for Mobile Ad-Hoc

Network. International Journal of Emerging Technology & Research, 1(1), 253-259.

13. Mr. Yuvaraj.R. A Protected Multi Authorizing Reprogramming Protocol for Wireless

Sensor Networks. International Journal of Emerging Technology & Research, 1(1),

271-275.

14. Mrs. S. Jayanthi. Survey on Single and Hybrid Mining Approaches in Heart Disease

Diagnosis International Journal of Emerging Technology & Research, 1(1), 219-224.

15. Mrs. S. Jayanthi. Creating Realistic Load Testing Scenarios & Load Test Data.


16. Mrs. W. Mercy. Theoretical Analysis of an Algorithm Supporting Twig Pattern Queries.


17. Mrs. Anees .M. A Complete Survey on Association Rules with Applicable to Different

Domain.International Journal of Emerging Technology & Research, 1(1), 215-218.

18. Mr. A. Naresh Kumar. An Investigation about Malware Detection Using Feature

Filtering.International Journal of Emerging Technology & Research, 1(1), 231-234.

19. Mr. Prakash .S. A Rudimentary Analysis of one Time Password in Contemporary

Scenario.International Journal of Emerging Technology & Research, 1(1), 235-237.

20. Mrs. Jessy Nirmal.A.G. Survey on Routing Protocols for Wireless Sensor Networks.


21. Mrs. Sumitha.N, “Por Routing Protocol Implementation Design”, International Journal

of Emerging Technology & Research, 1(1), 238-241.

22. Dr. P. S.K. Patra. Agent – Based Software Engineering. International journal of

Computational Engineering & Management, 15(6), 68-71.

23. Dr. P. S.K. Patra. Importance of Different Agents in Software Development.

International Journal of Engineering research and Technology, 1(10), 1-6.

24. Dr. P. S.K. Patra. Blocking of Illegal Websites in Student’s Mobile Using Android

Application. International Journal of Research in Engineering & Advanced Technology, 1(1),

1-4.

25. Dr. P. S.K. Patra. Segmentation Of 3D Brain Using an Adaptive K-means Algorithm.

International Journal of Research in Engineering & Advanced Technology, 1(1), 1-6.

26. Mrs. M. Jeyaselvi. Routing Disruptions in Wireless Sensor Networks. International

Journal of Research in Engineering & Advanced Technology, 1(1), 1-4.

27. Mrs. A. Karmel, Analysis of MANET Routing Protocols Based on Traffic Type.

International Journal of Research in Engineering & Advanced Technology, 1(1), 1-4.

28. Mrs. A. Karmel. Survey on Mitigation of DOS and DDOS Attacks in the Presence of

Clock drift. International Journal of Research in Engineering & Advanced Technology, 1(1),

1-8.

29. Mrs. S. Jayanthi. Detecting and Preventing Traffic Attack through Stepping Stones and

securing the information using watermarking. International Journal of Research in

Engineering & Advanced Technology, 1(1), 1-4.

30. Mrs. I. Anisha. Dynamic Service Integration Using SOA with Centralized

Orchestration. International Journal of Research in Engineering & Advanced Technology,

1(1), 1-5.

31. Mrs. Mercy. Survey on Service Oriented Architecture to Support the Deployment of

Web Services on Sensor Nodes. International journal of Computer Application Technology

& Research, 2(2), 180-184.

32. Dr. P. S.K. Patra. Automatic Diagnosis of Diabetes by Expert System. International

Journal of Computer Science, 9(2), 299-304.

33. Dr. P. S.K. Patra. An Expert System for Diagnosis of Human Diseases. International

Journal of computer Applications, 1(13), 71-74.

34. Dr. P. S.K. Patra. An Expert System for Diagnois of Human Diseases(ESDHD).

International Journal for Society of computer Sciences, (1), 19-24.

35. Dr. P. S.K. Patra. Development of an expert tool using Principal Component Analysis

(PCA) approach: for identifying human diseases & its severity. International Journal of

computer Applications, 1(13), 94-101.

36. Dr. P. S.K. Patra. Renewable Energy Source. International Journal of computer

Applications,1(17), 44-53.

Department of Electronics and Communication Engineering

1. Ms.S.Chandravadhana “Compression of satellite image using lossy and lossless coding

techniques”, International Journal of Engineering and Technology, Vol.6, No.1, 2014,

pp.118-128.

2. Ms.R.Maheswari “A systematic literature review on efficient and reliable broadcast in

vehicular network” ,International Journal Electronics and Communication engineering,

Vol 6, No. 3(2013), pp.199-204.

3. Mr. P.Gnanasivam “Score based threshold for gender classification using finger print

ridge parameters and physical size”, Wulfenia Journal, Vol 19, No 8(2012), pp.71-92.

4. Mr P.Gnanasivam “Finger print general classification using wavelet transform and

singular value decomposition”, International Journal of Computer Science ,Vol.9,Issue

2,No.3,March 2012,pp.274-282

5. Mr P.Gnanasivam “Estimation of age through finger prints using wavelet transform and

singular value decomposition”, International Journal of Biometrics and Bioinformatics,

Vol. 6, Issue 2, 2012, pp.58-67.

6. Mr P.Gnanasivam “Gender identification using finger print through frequency domain

analysis”, European Journal of Scientific Research, Vol. 59, No.2 (2011), pp.191-199.

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

1. Krishnamoorthy.A (2009). A Comparative Study of Design of Three Phase Induction Motor

using Optimization Techniques and Genetic Algorithms. International Journal of MC Square

Scientific Research, 1(1), 66-75.

2. Krishnamoorthy.A (2009). Application of Genetic Algorithms in the Design Optimization of

Three Phase Induction Motor. National Journal of Computer Applications, 2(4), 1-5.

3. Srinivasan Alavandar and M. J. Nigam (2009). Comparative Analysis of Conventional and

Soft Computing based Control Strategies for Robot Manipulators with Uncertainties.

International Journal of Computational Cognition,7(1), 52- 61.

4. Srinivasan Alavandar, Tushar Jain and M. J. Nigam (2009). Bacterial Foraging Optimized

Hybrid Fuzzy Precompensated PD Control of Two Link Rigid - Flexible Manipulator.

International Journal of Computational Intelligence Systems, 2(1), 51-59.

5. Srinivasan Alavandar and M. J. Nigam (2009). New Hybrid Adaptive Neuro Fuzzy

Algorithms for Manipulator Control with Uncertainties -Comparative Study. ISA

Transactions, 48(4), 497-502.

6. Srinivasan Alavandar, Tushar Jain and M. J. Nigam (2009). Particle Swarm Optimized Hybrid

Fuzzy Precompensated Trajectory Control of Rigid-Flexible Manipulator. International

Journal of Knowledge-Based and Intelligent Engineering Systems,13(3-4), 155-167.

7. Krishnamoorthy.A (2010).A comparative study of optimized design of Three Phase Induction

Motor. National Journal of Technology, 6 (4), 24 – 29.

8. Tushar Jain, Srinivasan Alavandar, SVK Radhamohan, and M.J. Nigam (2010). Genetically-

Bacterial Swarm Optimization: Fuzzy Pre-compensated PD Control of two link rigid-flexible

manipulator, International Journal of Intelligent Computing and Cybernetics, 3(3), 463 – 494.

9. Tushar Jain, Srinivasan Alavandar, M.J. Nigam (2010). A Hybrid Genetically-Bacterial

Foraging Algorithm converged by Particle Swarm Optimization for global optimization. Int.

J. Bio-Inspired Computation, 2(5), 340 -348.

10. Alavandar, S., Jain, T. and Nigam, M.J (2010). Hybrid bacterial foraging and particle swarm

optimisation for fuzzy precompensated control of flexible manipulator. Int. J. Automation and

Control, 4(2), 234–251.

11. S. G. Patil, S. Mandal, Srinivasan Alavandar, A V Hegde (2011). Neuro-Fuzzy based

Approach for Wave Transmission Prediction of Horizontally Interlaced Multilayer Moored

Floating Pipe Breakwater. Ocean Engineering, 38 (1), 186 –196. (Impact Factor: 1.178)

12. Annapoorani.S (2012). Three Phase High Power Quality Two-Stage Boost Converter.

International Journal of Engineering Science and Technology, 4(04), 1702 – 1712.

13. Krishnamoorthy.A (2013). Optimisation of Three Phase Squirrel Cage Induction Motor Using

Genetic Algorithm. Indian Streams Research Journal, 1(1), 115-121.

14. Krishnamoorthy.A (2013). Automatic Generation Control of Thermal-Thermal Two Area

Interconnected Systems using Anti Windup pi Controller. Australian Journal of Basic and

Applied Sciences, 7(11), 304-313.

DEPARTMENT OF INFORMANTION TECHNOLOGY

1. Dr.R.K.SelvaKumar "An Edge based Text segmentation from complex images", International

Journal of engineering Research & technology Vol No: 02, Issue No: 07,April 2013.

2. K.Sundaramoorthy " Novel method to provide security and maximum throughput in wireless

mesh networks", International Journal of Multidisciplinary research and advances in

engineering, Vol:5, No.III,JULY 2013

3. K.Sundaramoorthy "Improve the security in route discovery of AODV IN Wireless mesh

networks", European Journal of Scientific Research, Vol:103, No.III, PP:460-467, JUNE

2013

4. K.Sundaramoorthy "An Efficient routing method with the consideration of self-seeking nodes

in wireless mesh networks", International Journal of innovative research and studies,

Vol:2.Issue.6, , PP:347-354, JUNE 2013

5. Mr.K.Sundaramoorthy ”Minimal Java”, International Journal on Innovation Engineering

and Technology, June, 2013

6. Mr.K.Sundaramoorthy “Efficient method of detecting data leakage using misusability weight

measure”, International Conference on Innovation Engineering and Technology, June, 2013

7. A.Velmurugan“ Role of Digital image processing techniques in agriculture”,International

Conference, SRM university 15,Feb,2013

8. A.Velmurugan“Detection of skin cancer using IFS and Spatial Data Mining techniques”,

International Conference, SRM University 15,Feb,2013

9. T.AMUTHA "GSM based vehicle tracking system using tough sensor", National Conference

On Electronics, Communication And Signal Processing, Vol No: 02, Issue No: 07, April

2013

10. T.AMUTHA "Electronic ticketing using QR codes in a public transport network", National

Conference On Electronics, Communication And Signal Processing, Vol No: 02, Issue No:

07, April 2013

11. Mr.K.Arun Prasad " Execution of critical applications in untrusted environment", National


07, April 2013

12. Mr.K.Arun Prasad "Accessing constrained web services from mobile phones using multiple

authentication techniques", National Conference On Electronics, Communication And Signal

Processing, Vol No: 02, Issue No: 07, April 2013

13. Mr.R.Yuvaraj "Motion based video surveillance system for mobile clients", National


07,April 2013

14. Mrs.Nisturni Muthu "Load Balancing In grid computing using ARM algorithm", National


07, April 2013

15. Mr.K.Arun Prasad "Automatic Face Matching System", National conference on information

communication and networking, Vol No: 01, Issue No: 04, April 2012

16. Mr.K.Arun Prasad "Mobile agent for load balancing in heterogeneous network", National

conference on information communication and networking, Vol No: 01, Issue No: 04, April

2012

17. Mr.K.Arun Prasad "Soft Biometric Traits Based Face Matching System", National conference

on information communication and networking, Vol No: 01, Issue No: 04, April 2012

18. Mr.K.Arun Prasad "Inter –Packet delay based correlation for encrypted connection through

stepping stones", National conference on information communication and networking, Vol

No: 01, Issue No: 04, April 2012

19. Mr. R.Kingsly Stephen "Dynamic resource allocation for efficient parallel data

processing in the cloud ", National conference on information communication and

networking, Vol No: 01, Issue No: 04, April 2012

20. Mr.R.Yuvaraj "Self Healing Mechanism For Identification Of Malicious", National


2012

21. Mrs.Nisturni Muthu "Data delivery properties of human contact networks", National


2012

22. Mr.K.Sundaramoorthy "Distinguishing DDoS Attacks from flash crowds in trace back

method", National conference on information communication and networking, Vol No: 01,

Issue No: 04, April 2012

23. Mrs. R.Vidhya "cooperative routing in static wireless networks",National conference on

information communication and networking, Vol No: 01, Issue No: 04, April 2012

24. Mrs. R.suvitha "Dynamic Replica placement for scalable ", National conference on

information communication and networking, Vol No: 01, Issue No: 04, April 2012

25. Mrs. Amirtha Ravichandran "Towards Ensuring Data Storage security in cloud computing",

National conference on information communication and networking, Vol No: 01, Issue No:

04, April 2012

26. Mrs. G.Keerthana "Efficient Geographic Multicast protocol for multihop mobile wireless",

National conference on information communication and networking, Vol No: 01, Issue No:

04, April 2012

27. Mrs. Amirtha Ravichandran "Multimedia Management for MANET In Cluster Based

Application", International conference on ACEEE, Vol No: 01, Issue No: 04, April 2011

28. Mrs. G.Keerthana "protecting peer-peer distributed networks from denial of service attacks"

International Conference On Electronics Computer Technology, Vol No: 01, Issue No: 04,

April 2011

29. Mr. S.Ramamoorthy "Multilevel intusion detection model using mobile agents in distributed

network environment", International journal of computer science and information

security, Vol No: 08,Issue No: 02, April 2010

30. Mr. S.Ramamoorthy "Data mining based stratified intrusion detection", journal of computer

applications, ISSN:0974-1925, April 2010

31. Mr. S.Ramamoorthy "Malware detection using assembly and api call sequences",

international journal of computer virology, April 2010

32. Mr. S.Ramamoorthy "kernel machines for malware classification and similarity analysis",

international joint conference on neural networks, April 2010

33. Mrs.N.Gayathri "security in wireless sensor networks", international conference on

computing communication and networking, Pp:1-6, April 2009

34. Mr.A.Velmurugan "Role of digital image processing techniques in agriculture", Proceedings of

international conference FACT-2009, Pp:1-6, April 2009

35. Mr.A.Velmurugan "Detection of skin cancer using IFS and Spatial data mining Techniques",

International conference on Global computing and communication (ICOGCAC”09), Pp:1-6, April

2009

Department of Mechanical Engineering

1. Gnanavelbabu A, Jerald Jand NoorulHaq A, “Multi objective Scheduling of Jobs, AGVs and

AS/RS in FMS using Non-Traditional Optimization Techniques”, (2008), International Journal

of Manufacturing Science and Production, Vol. 9, Nos. 1-2, pp 61-80.

2. Gnanavelbabu A, Jerald J, NoorulHaq A and Asokan P, “Simultaneous Scheduling of jobs,

AGVs and AS/RS in FMS using Artificial Immune System” (2009), International Journal of

Advances in Production Engineering and Management, Vol.4, No. 3, pp 139-150.

3. Gnanavelbabu A, Jerald J, Narendar K and NoorulHaq A, “Simultaneous Scheduling Machines

and AGVs in FMS Environment” (2009), Journal of Modern Manufacturing Technology, Vol.1,

No.1, pp.43-57.

4. Gnanavelbabu A, Jerald J and NoorulHaq A, “Scheduling of machines and AGVs in FMS

using Sheep Flock Heredity Algorithm”, (2009), International Journal of Industrial Engineering

Practices. Vol.1, No.2, pp.109-118.

5. Gnanavelbabu A, Jerald J and NoorulHaq A, “Simultaneous scheduling of Machines and

Automated Guided Vehicles in FMS using Differential Evolution”,(2010),International Journal

of Production Research. Vol.48, No.16, pp. 4683 – 4699.

6. Gnanavelbabu A, Jerald J and NoorulHaq A, “Particle Swarm Optimization for scheduling of

Machines and Automated Guided Vehicles in Flexible Manufacturing Systems”, (2010),

International Journal of Materials, Manufacturing and Optimization. Vol.1, No.1, pp.01-11.

7. Gnanavelbabu A, Dhivya S, Jerald J and NoorulHaq A, “Scatter search for scheduling of

Machines and Automated Guided Vehicles in Flexible Manufacturing Systems”, (2010),

International Journal of Production Technology and Management Research. Vol.1, No.1, pp.09-

18.

8. Gnanavelbabu A, Arunagiri P,Bhaskar GB and Muniraj R, “Theoretical Methodology for

Reduction of Industrial MUDA using Lean Six Sigma”, (2012), International Journal of

Production Technology and Management Research, Vol. 3, No.2,pp 117-120.

9. Gnanavelbabu A,Rambabu D, Bhaskar GB and Ratnakar, “Development of an Algorithm for

Nesting with Common Cut Methodology Using Identity Coordinator Function”, (2012),

International Journal of Production Technology and Management Research. Vol. 3, No.1, pp 1-

10.

10. Gnanavelbabu A,Venkatesan N ,Bhaskar GB, Fredric J, Vigneshan S & Kalaiarasu R,

“Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay

Composite”, (2012), International Journal of Mechanical Engineering and Materials Sciences,

Vol. 5, No.1,pp 1-5.

11. Gnanavelbabu A,Rambabu D, Lenin A, and Bhaskar G.B, “Gap analysis and optimization of

process involved in product design and development by integrating enterprise resource planning

& product lifecycle management”,(2013),ELSEVIER, Procedia Engineering, Vol. 64,pp 983-

992.

12. Gnanavelbabu A and Arunagiri P, “Implementation of Lean Manufacturing System in Bogie

Assembly in Railway Coach Factory”, (2013), Applied Mechanics and Materials, Vol. 248, pp

511-515.

13. Gnanavelbabu A,Thirumalvalavan S, and Senthil R, “Effect of Heat Treatment on Tensile

Strength, Hardness and Microstructure of AZ61A Magnesium Alloy”, (2013), International

Journal of Metallurgical & Materials Science and Engineering, Vol. 3(4), pp 39-48.

14. Gnanavelbabu A and Arunagiri P, “Review on Reduction of Delay in manufacturing process

using Lean six sigma (LSS) systems”, (2013), International Journal of Scientific and Research

Publications, Vol. 3, No. 2, pp 1 - 4.

15. Gnanavelbabu A and Panneerdhass R,“Fatigue and creep life prediction for composites using

FEA”, (2013), International Journal of Mechanical Engineering and Materials Sciences, Vol. 6,

No.2, pp 171-180.

16. Gnanavelbabu A,Muthazhagan C, Bhaskar GB and Rajkumar K, “Influence of Graphite

Reinforcement on Mechanical Properties of Aluminum-Boron Carbide Composites”, (2014),

Advanced Materials Research, Vol.845, pp 398-402.

17. Gnanavelbabu A,Dhandapani N and Sivasankar M, “Failure Analysis of Cementless Hip Joint

Prosthesis”, (2014),Advanced Materials Research, Vol. 845, pp403-407.

18. Gnanavelbabu A,Mugendiran V and Ramadoss R, “Tensile Behavior of Al5052 Alloy Sheets

Annealed at Different Temperatures”, (2014), Advanced Materials Research, Vol. 845, pp431-

435.

19. Gnanavelbabu A, Muthazhagan C, Rajkumar K and Bhaskar G.B, “Corrosion behavior of

Aluminium-Boron carbide-graphite composites”, (2014), Applied Mechanics and Materials.

(Accepted for Publication)

20. Gnanavelbabu A, Martin Charles M, and Rajkumar K, “Evaluation of Mechanical Property of

Friction Welded EN24 Steel Joints” (2014), Applied Mechanics and Materials. (Accepted for

Publication)

21. Gnanavelbabu A and Loganathan D, “Formability Analysis of AA6061 Aluminium Alloy at

Room Temperature” (2014), Applied Mechanics and Materials. (Accepted for Publication)

22. Gnanavelbabu A, Sankar M, Baskaran R and Rajkumar K, “Abrasive Assisted Electro

Chemical Machining of Aluminum-Boron Carbide-Graphite Hybrid Composite” (2014), Applied

Mechanics and Materials. (Accepted for Publication)

23. Gnanavelbabu A, Panneerdhass R, Baskaran R and Rajkumar K, “Mechanical Properties of

Chopped Randomly Oriented Epoxy - Luffa Fiber Reinforced Polymer Composite” (2014),

Applied Mechanics and Materials. (Accepted for Publication)

24. Gnanavel Babu A, Senthil R and Ramadoss R, “Characterization of AZ61A Magnesium Alloy

at Elevated Temperature”, (2014), Applied Mechanics and Materials. (Accepted for Publication)

25. Gnanavelbabu A, Sankar M and R.Baskaran, “Optimization of Surface Roughness in Electro

Chemical Machining” (2014), Applied Mechanics and Materials. (Accepted for Publication)

26. Sudhagar K., Karikalan L. and Chandrasekaran M (2013), “ Comparative Studies on vegetable

oil usage in C.I Engines as an Alternative to Diesel Fuel, International Review of Mechanical

Engineering, Vol. 7, N.4, pp 705 – 715.

http://www.scientific.net/Participant/PaperEdit/3236?PaperId=403542

http://www.scientific.net/Participant/PaperEdit/3236?PaperId=403542

27. Sudhagar K., Balasubramanian M. and Rajarajeswari G. (2013), “A study on seamless

information sharing between robots in identifying the optimal path: An agent based approach”,

5th int. Nat. Conf on Advances in Communication, Networking & Computing.

28. Sudhagar K., Noorul Haq A. and Selvaraj T. (2009), ‘An Intelligent Genetic Fuzzy Approach

to the Truck baker Upper Problem’, International Journal of System Simulation, Vol. 2, No. 2.

pp. 611-616.

29. Sudhagar K., Noorul Haq A. and Selvaraj T. (2009), ‘Neuro-Fuzzy Based Adaptive Navigation

for Truck Like Mobile Robot’, International Journal of Soft Computing, Vol. 2, No. 7, pp. 727-

732.

30. Sudhagar K., Noorul Haq A. and Selvaraj T.(2008), ‘Navigation of Mobile Robot in an

Automated Industry using ANFIS Technique’, Journal of Industrial Engineering, Vol.1, No.7.

pp. 19-25.

31. Sudhagar K., Noorul Haq A. and Selvaraj T., (2008) ‘Particle Swarm Optimization Tuned

Fuzzy Control Approach to the Truck Backer Upper Problem’, International Journal of System

Simulation, Vol. 3, No. 1.

32. Sudhagar K., Noorul Haq A. and Selvaraj T., ‘Online Path Finder Algorithm for Mobile Robot

Navigation in Unmapped Region’, International Journal of System Signal Control and

Engineering Application (Under review).

33. Sudhagar K., Noorul Haq A. and Selvaraj T., ‘Application of Adaptive Neuro Fuzzy Network

to Control the Self Learning System’, International Journal of System Simulation (Under

review).

34. Vijay Ananth, S., Kalaichelvan, K. and Rajadurai, A. (2012) “Effect of Thermo Cycling

Process in Al6063/SiCp Composites”, European Journal of Scientific Research, ISSN 1450-

216X Vol. 88 No 3, pp.403-408.

35. Vijay Ananth, S., Kalaichelvan, K. and Rajadurai, A. (2012) “Optimization of Super plastic

Forming of Al6063/5%SiCp Composites Using Taguchi Experimental Design”, International

Review of Mechanical Engineering (I.RE.M.E.), ISSN 1970-8734, Vol. 6, No.6, pp. 1209-1213.

36. Vijay Ananth, S., Kalaichelvan, K. and Kumerason, M. (2012) “Effect of Temperature in

Superplastic Forming in Al6063/SiCp”, Composites Advanced Materials Research, Vol. 538-

541, pp. 1111-1114.

37. Narendranathan S.K. and Sudhagar K (2013), “Impact of Biodiesel on the performance &

Emission of CI Engine”, International Journal of Mechanical & Mechatronics Engineering

IJMME-IJENS Vol:14 No:01.

38. Thiyagu M., Shahul Hamid Khan., Prabhakaran G.,(2005) ‘A Particle Swarm Optimization

Algorithm For Permutation Flowshop Scheduling with regular and Non-Regular measures’, The

International Journal of Applied Management and Technology

39. A. Siddique Ahmed Ghias, B. Vijaya Ramnath , C. Elanchezhian, M. Jaivignesh, S. Rajesh, C.

Parswajinan (2014), Evaluation of mechanical properties of aluminium alloy–alumina–boron

carbide metal matrix composites, Materials & Design, Volume 58, Pages 332–338

40. A. Siddique Ahamed Ghias, K. Suresh, A. Sivarangar, N. Ramanan, (2013), Design and

optimization of engine valve by light, Volume 2, pp 167-169.

41. K. Suresh and A. Siddique Ahamed Ghias, (2013),” Investigation into cold upset forging of

sintered Aluminium square Preforms”, International Journal of Mechanical and Manufacturing

Technology , Volume 2, Issue 2 pp. 170-175.

http://www.sciencedirect.com/science/article/pii/S0261306914000971







http://www.sciencedirect.com/science/journal/02613069

http://www.sciencedirect.com/science/journal/02613069/58/supp/C

42. Gnanavelbabu A, Prabhaharan P, Jerald J and NoorulHaq A, “Particle swarm optimization for

scheduling of machines and AGVs in FMS”, Proceedings of International conference on

Advances in Manufacturing Technology, IIT Madras, Feb-2008. pp.C86.

43. Gnanavelbabu A,NoorulHaq A and Jerald J, “ Multi objective scheduling of jobs, AGVs and

AS/RS in FMS using Sheaf Flock Heridity Algorithm”, Proceedings of International conference

on Advances in Manufacturing Technology, IIT Madras, Feb-2008. pp.C87.

44. Gnanavelbabu A, Jerald J, Prabhaharan P and NoorulHaq A, “Scheduling Optimization of

Machines and AGVs in Flexible Manufacturing Systems”, Proceedings of International

conference on Digital Factory, Coimbatore Institute of Technology, Coimbatore, Aug-2008. pp.

546-553.

45. Gnanavelbabu A, NoorulHaq A, Jerald J, Asokan P and Narendar K, “Simultaneous scheduling

of machines and AGVs by using AIS”, Proceedings of The 6th International Conference on

manufacturing Research 08, Brunel University, West London, September-2008, pp. 749-757.

46. Gnanavelbabu A,NoorulHaq A and Jerald J, “Artificial Immune system based scheduling for

Machines and Material Handling Systems in FMS”, Proceedings of2nd International and 23rd All

India Manufacturing Technology, Design and Research Conference, IIT madras, Dec 2008;

p.51-57.

47. Gnanavelbabu A, Jerald J and NoorulHaq A, “Multi objective scheduling of Machines and

Material Handling Systems in FMS Environment”, Proceedings of International Conference on

Supply chain Management and Information Systems, National Institute of Technology,

Tiruchirappalli, Dec 2008. pp. 696-703.

48. Gnanavelbabu A, Dhivya S, and NoorulHaq A, “Scatter search for Multi Objective Scheduling

Machines and AGVs in Flexible Manufacturing Systems”, Proceedings of International

conference on Advances in Industrial Engineering Applications, Anna University, Chennai, Jan

2010; pp. N29.

49. Gnanavelbabu A,Rambabu D, Bhaskar G.B and Ratnakar, “Development of an Algorithm for

Nesting with Common Cut Methodology Using Identity Coordinate Function”, Proceedings of

International Conference on Futuristic Trends in Mechanical Engineering, ICFTME 2012,

Thiruvalluvar College of Engg and Tech, Vandavasi, January 28th -29th, 2012.

50. Gnanavelbabu A, VenkatesanN, Muruganandam N and Bhaskar G.B, “A Critical review on

Nano clay related polymer composite material”, Proceedings ofInternational Conference on

Futuristic Trends in Mechanical Engineering, ICFTME 2012, Thiruvalluvar College of Engg.

and Tech, Vandavasi, January 28th -29th , 2012.

51. GnanavelbabuA ,Rambabu D, Lenin A and Bhaskar G.B, “Design and Optimization of

Material Selection through the Integration of Enterprise Planning and Product Lifecycle

Management”, (2013), Proceedings of International Conference on Engineering Materials and

Processes, Tagore Engineering College, pp 283-287.

52. Gnanavelbabu A,Senthilnathan D, Bhaskar G. B and Gopinath KGS4, “Characterization of

Glass Fibre – Coconut Coir– Human Hair Hybrid Composites”, (2013), Proceedings of

International Conference on Engineering Materials and Processes, Tagore Engineering College,

May-2013, pp 404-409.

53. Gnanavelbabu A and Panneerdhass R, “Fatigue and Creep Life Prediction for Composite

Material Using FEA”, (2013), Proceedings of International Conference on Engineering

Materials and Processes, Tagore Engineering College, pp 427-436.

54. Gnanavelbabu A,Arunagiri P and Bhaskar GB, “Redesign of Manufacturing Process flow for

UPCR Pump housing in Automobile Industry to Improve Productivity through Lean Production

Systems”, Proceedings ofInternational Conference on Engineering Materials and Processes,

Tagore Engineering College, May-2013, pp 464-468.

55. Gnanavelbabu A,Venkatesan N, Bhaskar G.B, and Poyyathappan K, “Effect of Nanoclay

(MMT) on Mechanical Properties of High Density Polyethylene Nanocomposites”, Proceedings

of International Conference on Engineering Materials and Processes, Tagore Engineering

College, May-2013, pp 568-571.

56. Gnanavelbabu A, Sankar M, Manikandan SK and Tamilarasan V, “Multi Objective

Optimization of Micro Electro Chemical Optimization Process”, (2013), Proceedings of

International Conference on Green Technology in Engineering and Applied Sciences,

Adhiparasakthi Engineering College, GTME 95.

57. Gnanavelbabu A, Jerald J and Noorul Haq A, “Multi objective scheduling of jobs, AGVs and

AS/RS in FMS using Artificial Immune System”, Proceedings of National conference on

Emerging trends in Engineering and Sciences, Bannari Amman Institute of Tech., Dec-2007, pp.

229-239.

58. Gnanavelbabu A, Noorul Haq A, Munikumar J and Jerald J, “Scheduling of machines and

AGVs in FMS using Sheep Flock Heredity Algorithm, Proceedings of National Conference on

Recent Advances in Manufacturing Management, Annamali University, Feb 2008.

59. Gnanavelbabu A, Venkatesan N, Fredric J, Vigneshan S, Kalaiarasu R and Bhaskar G B,

“Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay

Composite, Proceedings of National Conference on Research Trends In Mechanical

Engineering, NCRTME'12 , Vel’s University, Chennai. April 11, 2012.

60. Gnanavelbabu A, Rambabu D, Senthil Rajan U, Vasanthan KP and Bhaskar G.B, “Modeling of

Heavy Vehicle Break Drum through Static and Thermal Analysis using CAE”, Proceedings of

National Conference on Fascinating Advancements In Mechanical Engineering "FAME 2013",

RMK College of Engineering and Technology, March-2013, pp 154-158.

61. Gnanavelbabu A, Venkatesan N, Babu S, Jaheer Hussain S, Ashokraj, and Bhaskar G.B,

"Important Mechanical Properties in High Density Polyethylene Nano Composite", Proceedings

of National Conference on Fascinating Advancements In Mechanical Engineering "FAME

2013", RMK College of Engineering and Technology, March 2013, pp 185-188.

62. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘System Architecture and

Methodology to Develop Mobile Robots’, National Conference Proceedings on Modeling and

Analysis of Production System, MAPS-2005, National Institute of Technology, Trichirappalli,

INDIA, January 2004, pp. 137-142.

63. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Task planning of autonomous

mobile robots using fuzzy heuristic control knowledge’, National Conference Proceedings on

NAME-2004, Jawaharlal National College of Engineering, Shimoga, Karnataka, INDIA,

February 2004, pp. 28-29.

64. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Genetic algorithm based safe path

planning of autonomous robot in uncertain Environment’, 21st AIMTDR Conference

Proceedings, Vellore Institute of Technology, Vellore, INDIA, December 2004, pp. 929- 935.

65. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Navigation of mobile robot by

evolutionary learning’, International Conference Proceedings on Emerging Technology in

Intelligent System and Control, EISCO-2005, Kumaraguru College of Technology, Coimbatore,

INDIA, January 2005, Vol. 3, pp. 437-441.

66. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Path planning of autonomous robot

by artificial intelligence’, International Conference Proceedings on Emerging Adaptive System

and Technology, EAST-2005, Noorul Islam College of Engineering, Kumaracoil, Kanyakumari

District, INDIA, December 2005, pp. 39- 47.

67. Narendranathan S.K., Sudhagar K , ‘ A study of biodiesel as an alternative fuel for

compression ignition engine’, IEEE International Conference Proceedings on ICAESM - 2012,

March 2012

68. Vijay Ananth. S, Dhanasekar, (2013) “Analysis of Super plastic forming in Al6063 alloy”,

International Conference on computational Intelligence and Advanced Manufacturing Research,

Vel’s University, Chennai.

69. Vijay Ananth S, Sethuraman and Viswapryia V (2013), “Extrusion analysis of Al6063/SiC

Composites”, Industrial Pollution and Control Technology, Annamalai University,

Chidambaram.

70. Vijay Ananth S., Chandrasekhar P and K.Kalaichelvan, (2012) “Super plastic Forming in

Al6063/SiCp Composites”, ICMOC 2012, Noorul Islam University, Thakklai.

71. Vijayananth S., Ravi S and Kalaichelvan K. (2008), Forming And Analysis In Metal Matrix

Composites Al/SiC, IIT, Madras(Dec-2008)

72. Vijayananth S., Ravi S. and Kalaichelvan K. (2008), "Development and Super plastic forming

analysis of Al/SiC composite sheet", National conference on Advances in Robotics , Precision

Engineering & Manufacturing Techniques(AIRPAM2008) Madras Institute of Technology,

Anna University, pp. 38-43.

73. Vijay Ananth. S, Sundaram. S., Anantharaman. N., and Ravikumar. K., Proceedings of the

International, Conference on Mechanical Engineering 2003 (ICME2003) 26- 28 December

2003, Dhaka, Bangladesh.Vol:14 No:01.

Department of Science & Humanities

1. R. Siva Sankari Growth and characterization of diammonium copper disulphate hexahydrate

single crystal. Materials Research Bulletin , Vol 51,(2014) pp.372–37

2. G. Sasikumar . Development of a novel cost effective methanol electrolyzer stack with Pt-

catalyzed membrane. Journal of Power sources , Vol 245,(2014), pp.161-167

3. G. Sasikumar . Development of nano-catalyzed membrane for PEM fuel cell applications.

Journal of Solid State Electrochemistry, Vol 17 , (2014) pp.2917-2925

4. B.J. Balamurugan. Group associated Petri nets in bio-computing. Lecture Notes in Computer

Science. Vol 7154, (2012), pp.270–271

Department of Management Studies:

1. Dr.Prabhu NRV, “Impact of Charismatic Leadership and Job Involvement on Corporate

Image Building “ , International Journal of Management, Vol.3, Issue 1, Jan-April 2012.

2. Dr.Prabhu NRV, “Critical Evaluation of a few Indian Entrepreneurs”, AMET International

Journal of Management, Vol.3, No: 2, Jan-June 2012.

3. Dr.Prabhu NRV, “ Impact of Work related Demographic Factors on Job Satisfaction of

Teaching Staff in Self-Financing Engineering Colleges” , IJEMR, Vol.2, Issue 3, March 2012.

4. Dr.Prabhu NRV, “Role of TQM in Strengthening Academia – Industry Interface”,

International Conference Publication of KLS’s Institute of Management Education and

Research, Belgaum, TATVA, Vol.IX, No: 2, July-Dec 2012.

5. Dr.Prabhu NR, “V Factors Affecting Intrapreneurship: A study of Indian Companies” ,



6. Dr.Prabhu NRV,” A Global Strategy for Block Building Corporate and Nations in a

Millennium”, AIMS International Journal of Management, Vol.6, No: 3, September 2012.

7. Dr.Prabhu NRV, “Logistic Skill Gap in Supply Chain Sector”, AIMS International Journal of

Management, Vol.6, No:3, September 2012.

8. Dr.Prabhu NRV, “E-Trust, E-Loyalty in Online Banking”, AIMS International Journal of


9. Dr.Prabhu NRV, “Employees Motivation in Organizations: An Integrative Literature Review”

, AIMS International Journal of Management, Vol.6, No: 4, December 2012.

10. Dr.Prabhu NRV, “Impact of Charismatic Leadership and Job Involvement on Corporate

Image Building”, International Journal of Management, Vol.3, Issue 1, Jan-April 2012.

11. Dr.Prabhu NRV, “ Critical Evaluation of a few Indian Entrepreneurs” , AMET International

Journal of Management, Vol.3, No: 2, Jan-June 2012.

12. Dr.Prabhu NRV, “ Impact of Work related Demographic Factors on Job Satisfaction of

Teaching Staff in Self-Financing Engineering Colleges” , IJEMR, Vol.2, Issue 3, March 2012.

13. Dr.Prabhu NRV, “ Role of TQM in Strengthening Academia – Industry Interface,



14. Dr.Prabhu NRV, “Factors Affecting Intrapreneurship : A study of Indian Companies” ,



15. Dr.Prabhu NRV , “ A Global Strategy for Block Building Corporate and Nations in a

Millennium” , AIMS International Journal of Management, Vol.6, No: 3, September 2012.

16. Dr.Prabhu NRV, “Logistic Skill Gap in Supply Chain Sector”, AIMS International Journal of


17. Dr.Prabhu NRV, “E-Trust, E-Loyalty in Online Banking”, AIMS International Journal of

Management, Vol.6, and No: 3, September 2012.

18. Dr.Prabhu NRV, “Employees Motivation in Organizations: An Integrative Literature Review”

, AIMS International Journal of Management, Vol.6, No: 4, December 2012.

19. Dr. Mohan M , “ Customer Relationship Management Strategy : Business Intelligence and

Execution” , International Journal of Business Intelligence & Innovations (IJBII) page no.134

to 140, Volume 1 issue 1 , March, 2014.ISSN 2348-4705, Print.

20. Dr. Mohan M , “ Inventory and working capital management : An empirical analysis,” Asia

Pacific Journal of Research

21. ( APJR) A peer Reviewed International Journal, Page no. 111-122, Volume I, Issue XIV, Feb

2014.ISSN 2320 – 5504. Impact factor: 0.4337, Print.

22. Dr.Shakila MK, “Critical Thinking, A survival Factor – HRM in Recession period”, SRM

Management Digest, ISSN 0973-6905, Volume 7, April 2009

23. Dr.Shakila MK, “ Winners and losers of In-Car Entertainment Products” , Journal of

Management and Entrepreneurship, MTC Global, ISSN 2231-3710, Volume 1 Issue -2, July –

September 2011

24. Dr.Shakila MK. E-Marketing, Going down the wrong way, Researches World, Journal of Arts,

Science & Commerce (ISSN: 2231-4172), Volume IV, Issue -3(3), July 2013. Global Impact

Factor: 0.479

25. Dr.Shakila MK Corporate culture in Business Management, International Journal of current

engineering and Technology, ISSN 2277-4106 (Accepted for publication) June 2013. Global

Impact factor: 1.274

26. Dr.Shakila MK Foreign organized Retail Intervention versus Indian Unorganized Retail

Sector, Indian Journal of Management Science, ISSN: 2249-0280, E-ISSN: 2231-279X,

Volume III, Issue 2, April 2013, Global Impact Factor: 0.376.

27. Periasamy P. “Emerging trends in service sectors”, on March 4th and 5th 2010. J.V.Publishing

House,(publisher of Readers Shelf) Jodhpur, Rajasthan, Print.

28. Periasamy P. “ A Study on Commodity Derivative Market and Its Impact over Spot Market

with special reference to Selected Agricultural Produces in India” , Zenith International

Journal of Business Economics and Management Research (ZIJBEMR – Vol -3 (i) Jan 2013,

ISSN 2249-8826 with an impact factor of 0.431, Print.

29. Periasamy P. “ Commodity future market and new initiatives taken by the Forward market

commission in India to regularize and popularize commodity future market among potential

investors – A descriptive Study” , on Jan 2014, International Organisation of Scientific

Research-Journal in Business and Management (US) ; (H-36165) e-issn ; 2278-487x in

Volume:15 Issue 6, P-ISSN-2319-7668, January 2014, page No.01 to 09 with an impact factor

of 1.46, Print.

30. Periasamy P. “ A Study on Commodity Derivative Market of Selected Non Agricultural

products ( Gold, crude Oil, Copper) in the Chennai market – An Analysis”, February 2014,

page No.38-44, Volume2 Issue 6 with p-ISSN 2321-5925, e-ISSN 2321-5933, International

Organization of Scientific Research-Journal of Economics and finance (US) (R12036)

February 2014, page No.38-44, Volume2 Issue 6 with p-ISSN 2321-5925, e-ISSN 2321-5933

with an impact factor of 1.43 Print.

31. Periasamy, “ East Asia's roaring commodity markets losing their voice in the global market –

A Study, on April 2014, “IAJAM – INDO ASIAN JOURNAL OF ADVANCED

MANAGEMENT” (ISSN 2250 - 1266), Volume-I, Issue-2, April, 2014), Print.

Documents

Papers Published in International / National Journals ... · Papers Published in International / National Journals Department of Civil Engineering 1. Nithya. R, Velumani. A, S.R.R