Fig 3.

Fig 4.

Fig 5.

Fig 6.

Water based, lightweight glues are ideal forfast assembly of rockets.

Building Rockets

Fig 2.

Bonding Advice.Assembly of rocket motorcardboard tubes with Roket CardGlue.Fig1. Carefully mark out thetube, assemble parts accu-rately, then glue by wicking in a dropof Roket Card Glue. Adds minimalweight.

Fig 2. Fin and Fuselage Assembly.Balsa or plastic fins can be bonded withRoket Card Glue to painted or coatedcard and reinforced with a fillet ofAliphatic Resin.

Fig 3. Plastic nose cone & other plasticparts. R/C Modellers glue is ideal forbonding plastic parts to plastic, card orpainted surfaces. Dries clear and flexible.Remove excess glue with water.

Fig 4. Filleting wooden fins, bondinglaunch lugs and filling tube joints.Reinforce wooden fins with DeluxeMaterials genuine Aliphatic Resinsmoothing into joint.

Fig 5. & 6. Shock Cord Mount. Use Roket Card Glue to assemble andbond inside rocket.

Parachute. Use R/C Modellers Glue toreinforce the parachute cord lines to thechute.

Fig 1.