Packing - Infineon Technologies

Addi t ional Informat ion, Aug. 2006

Packing

w w w . i n f i n e o n . c o m

Edition 2006-08

Published by Infineon Technologies AG 81726 Munich, Germany© Infineon Technologies AG 2006. All Rights Reserved.

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

http://www.infineon.com

Additional Information 3 2006-08

Packing

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Sorts of Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.1 Tape & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.2 Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52.3 Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.4 Supplementary Dry-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.5 Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 Tape and Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83.1 Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83.2 Ammopack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123.3 Radial Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4 Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5 Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175.1 Bakable Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175.2 Blister Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6 Bulk Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

7 Supplementary Dry-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Packing

Introduction

1 IntroductionInfineon packing methods and materials are designed based on the following considerations

• Protection against mechanical damage caused by handling and arising during shipment to the customer

• Protection against environmental influences such as moisture

• Protection against electrical damage caused by charging or discharging (ESD = Electro-Static Discharge)

• Sensible handling on the part of the customer (such as, for example, processing using pick-and-place machines)

2 Sorts of Packing

2.1 Tape & Reel

• DIN IEC 60 286-3

The components are placed on a plastic tape (carrier tape) made of polystyrene or polycarbonate, with correspondingly shaped recesses in its surface, which is then sealed with a cover tape (transparent foil). The tape is wound on to a reel, and supplied in a cardboard box (resembling a pizza box). There are now also larger boxes, including the so-called "Big-Box", which can accommodate up to 10 reels.

Figure 1 Tape & Reel ø Reel 180 mm and 330 mm

Infineon Infineon

Upper side

ø330

ø180

Removable cover tape


Direction of unreeling

CTPG5610

Barcode label (readable in this position)

Additional customer label(optional)

Sd

1211

109

87

65

43

21

8

9307

SdSd


Packing

Sorts of Packing

2.2 Tube

• DIN IEC 60 286-4

In this case, the components are inserted into a PVC tube of appropriate cross sectional shape and standard length (528 mm-2). It is open on both sides and after filling is sealed using stoppers or pins. A number of tubes in one box form a packing unit.

Figure 2 Tube

CPDS9071


Packing

Sorts of Packing

2.3 Tray

• DIN IEC 60 286-5

Here, the components are placed in rows in special compartmentalized plastic trays. One or more such trays laid one on top of the other here make up a packing unit.

Figure 3 Tray’s

CPDS9076

n Trays + 1 Top Tray

CPDS5918

Bakable Tray

Blister Tray


Packing

Sorts of Packing

2.4 Supplementary Dry-Pack

• JEDEC-STD-033B

Prior to packing, the components are heated to 125° C, for example, over a period of 24 hours, and then vacuum-sealed in a bag made of composite aluminum-plastic material. A desiccant is included in the packaging to remove residual moisture and soak up moisture penetrating the packaging during storage. An accompanying moisture indicator card shows the relative humidity level as a means of control.

2.5 Boxes

For each type of packing, there is an appropriate, correctly proportioned box or outer pack.

Each outer pack also receives a product label, on which all the important data is printed, in the form of a barcode and plain text (BPL = Barcode Product Label). After undergoing quality control, the boxes are sealed with an Infineon packing label.

Figure 4 Box

Please consult your nearest Infineon semiconductor solder offices (see list of addresses) if you have any queries regarding the packging units or multiple use.

Subject to change in the light of the new Packaging Act.

Barcode label

Infineon packing labelInfineon

ORIGINAL

VERPACKT

PACKING


Packing

Tape and Reel

3 Tape and Reel

3.1 Tape

• DIN IEC 60 286-3

Figure 5 Packing for Tape & Reel1)

1) All dimensions in mm

CPDG9074

*)

e.g. 345

e.g. 3

45

*) Carrier tape width + 14 mm CPDC9073


Packing

Tape and Reel

Figure 6 ø Reel 180 mm and 330 mm Carrier tape width: 8, 12, 16 [mm]

Figure 7 ø Reel 330 mm Carrier tape width: 16, 24, 32, 44 [mm]

Infineon Infineon

Upper side

ø330

ø180




CTPG5610



Sd

1211

109

87

65

43

21

8

9307

SdSd



Infineon

ø330

1211

109

87

65

43

21

8

9307

SdSd

Upper sideRemovable cover tape

CTPG5611



Packing

Tape and Reel

Figure 8 ø Reel 180 mm Embossed Carrier tape width: 8 [mm]

Figure 9 Fixing on the Tape1)

Carrier tape width w 12 mm Carrier tape width > 12 mm


Infineon

Sd

Upper side

Bottom side

Upper side




CPCG1161

ø18030

±10

13±0

.2

on

CTPC5911

13±0

.2

CTPC5912


Packing

Tape and Reel

Figure 10 Direction of Unreeling1)

There shall be a leader of 400 mm minimum of cover tape, which includes at least 100 mm of carrier tape with empty compartments. All the leader may consist of the carrier tape with empty compartments, sealed by cover tape.

Figure 11 Labels and Boxes


Trailer (empty) Leader (empty)

(1 x Circumference / Hub)min. 160 mm

(1 x Circumference / Reel)min. 400 mm

Direction of unreeling1.5+0.1 4±0.1

CPTG5915

Barcode label

Infineon packing label

CTPC5914

Infineon

ORIGINAL

VERPACKT

PACKING

Infineon

Sd

Infineon packing label

ORIGINAL

VERPACKT

PACKING

Infineon

Infineon

Sd

CTPC5913

For 1 Tape (resembling a pizza box)

Up to 10 Tapes


Packing

Tape and Reel

3.2 Ammopack

• Placed in Zigzag (DIN IEC 60 286-2)

Figure 12 Up to 8.000 Components, Ammopack1)

Figure 13 Up to 2.000 Components, Ammopack1)


CPOC5890CPOC9068

e.g.

85 /335

e.g. 46

e.g. 3

45

CPOC9069

e.g.

46 e.g. 85

e.g. 3

45

CPOC5891


Packing

Tape and Reel

Figure 14 Supplementary Code for Ammopack

CPOC5910

EG1

CPOC5907

EG2


Packing

Tape and Reel

3.3 Radial Tape

Figure 15 Packing for Radial Tape1)


e.g.

115

e.g. 375

e.g. 3

75

CTPC9078

2 Tapes per Box

45 MAX. (internal size)

ø355

18

CTPG9115


Packing

Tape and Reel

Figure 16 Supplementary Code for Radial Tape

CPOC5910

EG1

CPOC5907

EG2


Packing

Tube

4 Tube• DIN IEC 60 286-4• Standard Length: 528-2 mm; coated (unless stated to the contrary)

Figure 17 Packing for Tube1)


CPDC9072

e.g.

85 max.

e.g. 130

e.g. 5

65

CPDS9071-1


Packing

Trays

5 Trays

5.1 Bakable Tray

• Temperature max. 150°C (DIN IEC 60 286-5)

Figure 18 Bakable Tray1)


CPDS9076

n Trays + 1 Top Tray

CCQB5888Mark for Pin 1

e.g.

136

e.g.

7.6

/12.

2

e.g. 315


Packing

Trays

Figure 19 Type of Boxes for Bakable Tray1)


CPDS9079

For 1 Tray

e.g.

35e.g. 150

e.g. 3

65

CPDS9080

For 7 Trays

e.g.

90

e.g. 180

e.g. 3

80

CPDS9081

For 10 Trays

e.g.

115

e.g. 180

e.g. 3

80


Packing

Trays

5.2 Blister Tray

Figure 20 Blister Tray1)


e.g.

21.

5/2

4e.

g. 1

35/2

03.2

e.g. 245 / 279.4

Upper Part

e.g.

135

/203

.2e.

g. 1

5.5

/21

e.g. 245 / 279.4

Lower Part


Packing

Trays

Figure 21 Packing for Blister Tray1)


CPDS5918

CPDS9080

e.g.

55

e.g. 220

e.g. 3

05

e.g.

100

e.g. 143

e.g. 2

75

CCGC9067


Packing

Bulk Material

6 Bulk Material

Figure 22 Bulk Material1)


CMTC9070

e.g.

29 e.g. 92e.g

. 140


Packing

Supplementary Dry-Pack

7 Supplementary Dry-Pack • JEDEC-STD-033B

Figure 23 Example Dry-Pack e.g. for Tubes

COOS5895

Stopper

Stopper

Desiccant

Device

Moisture Indicator

Inner Container

Barrier Bag


Published by Infineon Technologies AG

w w w . i n f i n e o n . c o m

http://www.infineon.com

Documents

Packing - Infineon Technologies