Packet Tracer - Navigating the IOSngarcia/old/RT1415/Ficha 5 Packet Tracer... · 2019. 8. 28. · Part 1: Ga Part 2: Re ackgroun This activ informatio art 1: G Note: Rev types of

©

P

T

O

B

P

S

S

© 2013 Cisco and

Packet T

Topology

ObjectivesPart 1: Ba

Part 2: Ex

Part 3: Se

BackgrounIn this actmodes, vaaccessing

Part 1: BIn Part 1 ocommand

Step 1: Con

a. Click Trace

b. Selecconne

c. Click

d. Drag conne

e. Selec

Step 2: Est

a. Click

b. Click

What

c. Click

d/or its affiliates.

Tracer -

asic Connec

xploring EXE

etting the Clo

nd tivity, you will arious configug the context-

Basic Conof this activityd modes and

nnect PC1 t

the Connecter window.

ct the light bluector with a ca

PC1; a windo

the other endection list.

ct the Console

ablish a ter

PC1 and then

the Terminalis the setting

OK.

All rights reserve

Navigat

ctions, Acces

EC Modes

ock

practice skillsuration modessensitive Hel

nnectionsy, you connecHelp features

to S1 uses a

ions icon (the

e Console caable dangling

ow displays a

d of the conso

e port to comp

rminal sess

n select the D

l application ig for bits per s

ed. This docume

ting the

ssing the CL

s necessary fs, and commop by configur

s, Accessct a PC to a sws.

a console c

e one that loo

able by clicking off of it.

n option for a

ole connection

plete the conn

ion with S1

Desktop tab.

con; verify tha

second?

ent is Cisco Publ

IOS

I and Explor

for navigatingon commandsing the clock

sing the Cwitch using a

cable.

oks like a light

ng it. The mou

an RS-232 con

n to the S1 sw

nection.

.

at the Port Co

ic.

ing Help

g the Cisco IOs you use on

k command.

CLI and Econsole conn

tning bolt) in t

use pointer wi

nnection.

witch and clic

onfiguration d

OS, including da regular bas

Exploringnection and e

the lower left

ill change to w

k the switch t

default setting

different user sis. You also

g Help explore variou

corner of the

what appears

o bring up the

gs are correct

Page 1 of 5

access practice

us

e Packet

s to be a

e

.

Packet Tracer - Navigating the IOS

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 5

d. The screen that appears may have several messages displayed. Somewhere on the display there should be a Press RETURN to get started! message. Press ENTER.

What is the prompt displayed on the screen?

Step 3: Explore the IOS Help.

a. The IOS can provide help for commands depending on the level being accessed. The prompt currently being displayed is called User EXEC and the device is waiting for a command. The most basic form of help is to type a question mark (?) at the prompt to display a list of commands. S1> ?

Which command begins with the letter ‘C’?

b. At the prompt, type t, followed by a question mark (?). S1> t?

Which commands are displayed?

c. At the prompt, type te, followed by a question mark (?). S1> te?

Which commands are displayed?

This type of help is known as context-sensitive Help, providing more information as the commands are expanded.

Part 2: Exploring EXEC Modes In Part 2 of this activity, you switch to privileged EXEC mode and issue additional commands.

Step 1: Enter privileged EXEC mode.

a. At the prompt, type the question mark (?). S1> ?

What information is displayed that describes the enable command?

b. Type en and press the Tab key. S1> en

What displays after pressing the Tab key?

This is called command completion or tab completion. When part of a command is typed, the Tab key can be used to complete the partial command. If the characters typed are enough to make the command unique, as in the case with the enable command, the remaining portion is displayed.

What would happen if you were to type te at the prompt?

c. Enter the enable command and press ENTER. How does the prompt change?

d. When prompted, type the question mark (?). S1# ?



Previously there was one command that started with the letter ‘C’ in user EXEC mode. How many commands are displayed now that privileged EXEC mode is active? (Hint: you could type c? to list just the commands beginning with ‘C’.)

Step 2: Enter Global Configuration mode.

a. One of the commands starting with the letter ‘C’ is configure when in Privileged EXEC mode. Type either the full command or enough of the command to make it unique along with the key to issue the command and press . S1# configure

What is the message that is displayed?

b. Press the key to accept the default parameter enclosed in brackets [terminal].

How does the prompt change?

c. This is called global configuration mode. This mode will be explored further in upcoming activities and labs. For now exit back to Privileged EXEC mode by typing end, exit or Ctrl-Z. S1(config)# exit S1#

Part 3: Setting the Clock

Step 1: Use the clock command.

a. Use the clock command to further explore Help and command syntax. Type show clock at the privileged EXEC prompt. S1# show clock

What information is displayed? What is the year that is displayed?

b. Use the context-sensitive Help and the clock command to set the time on the switch to the current time. Enter the command clock and press ENTER. S1# clock

What information is displayed?

c. The % Incomplete command message is returned by the IOS indicating that the clock command needs further parameters. Any time more information is needed help can be provided by typing a space after the command and the question mark (?). S1# clock ?

What information is displayed?

d. Set the clock using the clock set command. Continue proceeding through the command one step at a time. S1# clock set ?

What information is being requested?

What would have been displayed if only the clock set command had been entered and no request for help was made by using the question mark?



e. Based on the information requested by issuing the clock set ? command, enter a time of 3:00 p.m. by using the 24-hour format of 15:00:00. Check to see if further parameters are needed. S1# clock set 15:00:00 ?

The output returns the request for more information: Day of the month

MONTH Month of the year

f. Attempt to set the date to 01/31/2035 using the format requested. It may be necessary to request additional help using the context-sensitive Help to complete the process. When finished, issue the show clock command to display the clock setting. The resulting command output should display as: S1# show clock *15:0:4.869 UTC Tue Jan 31 2035

g. If you were not successful, try the following command to obtain the output above: S1# clock set 15:00:00 31 Jan 2035

Step 2: Explore additional command messages.

a. The IOS provides various outputs for incorrect or incomplete commands as experienced in earlier sections. Continue to use the clock command to explore additional messages that may be encountered as you learn to use the IOS.

b. Issue the following command and record the messages: S1# cl

What information was returned? S1# clock

What information was returned? S1# clock set 25:00:00

What information was returned?

S1# clock set 15:00:00 32

What information was returned?



Suggested Scoring Rubric

Activity Section Question Location

Possible Points

Earned Points

Part 1: Basic Connections, Accessing the CLI and Exploring Help

Step 2a 5

Step 2c 5

Step 3a 5

Step 3b 5

Step 3c 5

Part 1 Total 25

Part 2: Exploring EXEC Modes

Step 1a 5

Step 1b 5

Step 1c 5

Step 1d 5

Step 2a 5

Step 2b 5

Part 2 Total 30

Part 3: Setting the Clock Step 1a 5

Step 1b 5

Step 1c 5

Step 1d 5

Step 2b 5

Part 3 Total 25

Packet Tracer Score 20

Total Score 100

©

P

T

O

B

P

S

© 2013 Cisco and

Packet T

Topology

ObjectivesPart 1: Ga

Part 2: Re

BackgrounThis activinformatio

Part 1: GNote: Revtypes of in

Step 1: Ga

a. Click

b. Enter

c. Switc172.1

d. Click

D

S

S

D


Tracer -

ather PDU In

eflection Que

nd ity is optimize

on in simulatio

Gather PDview the Reflenformation yo

ather PDU in

172.16.31.2 a

the ping 10.h to simulatio6.31.2.

the PDU and

Destination MA

ource MAC A

ource IP Add

Destination IP

All rights reserve

Identify

nformation

estions

ed for viewingon mode and

DU Informection Questi

ou will need to

nformation

and open the

10.10.3 common mode and

note the follo

AC Address: 0

Address: 000C

dress: 172.16.

Address: 10.

ed. This docume

y MAC an

g PDUs. The danswer a ser

mation ons in Part 2

o gather.

as a packet

Command P

mand.

repeat the pin

owing informa

00D0:BA8E:7

C:85CC:1DA7

.31.2

10.10.3

ent is Cisco Publi

nd IP Ad

devices are aries of questio

before proce

t travels fro

Prompt.

ng 10.10.10.3

ation from the

741A

7

ic.

ddresse

already configons about the

eeding with Pa

om 172.16.3

3 command. A

e Outbound P

es

gured. You wie data you col

art 1. It will giv

1.2 to 10.10

A PDU appea

PDU Layer ta

ll gather PDUllect.

ve you an ide

0.10.3.

ars next to

ab:

Page 1 of 3

U

ea of the

Packet Tracer - Identify MAC and IP Addresses


At Device: Computer

e. Click Capture / Forward to move the PDU to the next device. Gather the same information from Step 1d. Repeat this process until the PDU reaches its destination. Record the PDU information you gathered into a spreadsheet using a format like the table shown below:

Example Spreadsheet Format

Test At Device Dest. MAC Src MAC Src IPv4 Dest IPv4

Ping from 172.16.31.2 to 10.10.10.3

172.16.31.2 00D0:BA8E:741A 000C:85CC:1DA7 172.16.31.2 10.10.10.3

Hub -- -- -- --

Switch1 00D0:BA8E:741A 000C:85CC:1DA7 -- --

Router 0060:4706:572B 00D0:588C:2401 172.16.31.2 10.10.10.3

Switch0 0060:4706:572B 00D0:588C:2401 -- --

Access Point -- -- -- --

10.10.10.3 0060:4706:572B 00D0:588C:2401 172.16.31.2 10.10.10.3

Step 2: Gather additional PDU information from other pings.

Repeat the process in Step 1 and gather the information for the following tests:

Ping 10.10.10.2 from 10.10.10.3.

Ping 172.16.31.2 from 172.16.31.3.

Ping 172.16.31.4 from 172.16.31.5.

Ping 172.16.31.4 from 10.10.10.2.

Ping 172.16.31.3 from 10.10.10.2.

Part 2: Reflection Questions Answer the following questions regarding the captured data:

1. Were there different types of wires used to connect devices?

2. Did the wires change the handling of the PDU in any way?

3. Did the Hub lose any of the information given to it?

4. What does the Hub do with MAC addresses and IP addresses?

5. Did the wireless Access Point do anything with the information given to it?

6. Was any MAC or IP address lost during the wireless transfer?

7. What was the highest OSI layer that the Hub and Access Point used? 8. Did the Hub or Access Point ever replicate a PDU that was rejected with a red “X”?

9. When examining the PDU Details tab, which MAC address appeared first, the source or the destination?

Packet Tracer - Identify MAC and IP Addresses


10. Why would the MAC addresses appear in this order?

11. Was there a pattern to the MAC addressing in the simulation?

12. Did the switches ever replicate a PDU that was rejected with a red “X”?

13. Every time that the PDU was sent between the 10 network and the 172 network, there was a point where the MAC addresses suddenly changed. Where did that occur?

14. Which device uses MAC addresses starting with 00D0?

15. To what devices did the other MAC addresses belong?

16. Did the sending and receiving IPv4 addresses switch in any of the PDUs?

17. If you follow the reply to a ping, sometimes called a pong, do the sending and receiving IPv4 addresses switch?

18. What is the pattern to the IPv4 addressing in this simulation?

19. Why do different IP networks need to be assigned to different ports of a router?

20. If this simulation was configured with IPv6 instead of IPv4, what would be different?

Suggested Scoring Rubric There are 20 questions worth 5 points each for a possible score of 100.

©

L

T

A

O

B

© 2013 Cisco and

Lab - Us

Topology

Addressing

R

S

S2

PC

PC

ObjectivesPart 1: Bu

Cable

Config

Part 2: Ex

Use s

BackgrounThe purposwitch recown Etheframe from


sing IOS

g Table

Device

1 G

1 V

2 V

C-A N

C-B N

uild and Con

e the network

gure the netw

xamine the S

show comma

nd / Scenarose of a Layecords host MArnet switch pom a PC, it exa

All rights reserve

S CLI wit

Interface

G0/1

VLAN 1

VLAN 1

NIC

NIC

nfigure the N

according to

work devices a

Switch MAC A

nds to observ

rio r 2 LAN switc

AC addressesorts. This procamines the fra

ed. This docume

th Switc

IP Ad

192.168

192.168

192.168

192.168

192.168

etwork

the topology

according to t

Address Tab

ve the proces

ch is to delives that are visicess is calledame’s source

ent is Cisco Publi

h MAC A

ddress

8.1.1 25

8.1.11 25

8.1.12 25

8.1.3 25

8.1.2 25

diagram.

the Addressin

ble

ss of building t

r Ethernet frable on the ne

d building the and destinat

ic.

Address

Subnet Mas

55.255.255.0

55.255.255.0

55.255.255.0

55.255.255.0

55.255.255.0

ng Table.

the switch MA

ames to host dtwork, and mMAC addres

tion MAC add

s Tables

sk Defaul

0 N/A

0 192.16

0 192.16

0 192.16

0 192.16

AC address ta

devices on thmaps those MA

s table. Whendresses. The s

s

t Gateway

8.1.1

8.1.1

8.1.1

8.1.1

able.

he local netwoAC addressesn a switch recsource MAC

Page 1 of 5

ork. The s to its ceives a address

Lab - Using IOS CLI with Switch MAC Address Tables


is recorded and mapped to the switch port from which it arrived. Then the destination MAC address is looked up in the MAC address table. If the destination MAC address is a known address, then the frame is forwarded out of the corresponding switch port of the MAC address. If the MAC address is unknown, then the frame is broadcast out of all switch ports, except the one from which it came. It is important to observe and understand the function of a switch and how it delivers data on the network. The way a switch operates has implications for network administrators whose job it is to ensure secure and consistent network communication.

Switches are used to interconnect and deliver information to computers on local area networks. Switches deliver Ethernet frames to host devices identified by network interface card MAC addresses.

In Part 1, you will build a multi-switch and router topology with a trunk linking the two switches. In Part 2, you will ping various devices and observe how the two switches build their MAC address tables.

Note: The routers used with CCNA hands-on labs are Cisco 1941 Integrated Services Routers (ISRs) with Cisco IOS Release 15.2(4)M3 (universalk9 image). The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). Other routers, switches and Cisco IOS versions can be used. Depending on the model and Cisco IOS version, the commands available and output produced might vary from what is shown in the labs. Refer to the Router Interface Summary Table at the end of this lab for the correct interface identifiers. Note: Make sure that the routers and switches have been erased and have no startup configurations. If you are unsure contact your instructor.

Required Resources 1 Router (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)

2 Switches (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)

2 PCs (Windows 7, Vista, or XP with terminal emulation program, such as Tera Term)

Console cables to configure the Cisco IOS devices via the console ports

Ethernet cables as shown in the topology

Note: The Fast Ethernet interfaces on Cisco 2960 switches are autosensing and an Ethernet straight-through cable may be used between switches S1 and S2. If using another model Cisco switch, it may be necessary to use an Ethernet crossover cable.

Part 1: Build and Configure the Network

Step 1: Cable the network according to the topology.

Step 2: Configure PC hosts.

Step 3: Initialize and reload the routers and switches as necessary.

Step 4: Configure basic settings for each switch.

a. Configure device name as shown in the topology.

b. Configure IP address and default gateway as listed in Addressing Table.

c. Assign cisco as the console and vty passwords.

d. Assign class as the privileged EXEC password.



Step 5: Configure basic settings for the router.

a. Disable DNS lookup.

b. Configure IP address for the router as listed in Addressing Table.

c. Configure device name as shown in the topology.

d. Assign cisco as the console and vty passwords.

e. Assign class as the privileged EXEC password.

Part 2: Examine the Switch MAC Address Table A switch learns MAC addresses and builds the MAC address table, as network devices initiate communication on the network.

Step 1: Record network device MAC addresses.

a. Open a command prompt on PC-A and PC-B and type ipconfig /all. What are the Ethernet adapter physical addresses?

PC-A MAC Address:

PC-B MAC Address:

b. Console into router R1 and type the show interface G0/1 command. What is the hardware address? R1 Gigabit Ethernet 0/1 MAC Address:

c. Console into switch S1 and S2 and type the show interface F0/1 command on each switch. On the second line of command output, what is the hardware addresses (or burned-in address [bia])?

S1 Fast Ethernet 0/1 MAC Address:

S2 Fast Ethernet 0/1 MAC Address:

Step 2: Display the switch MAC address table.

Console into switch S2 and view the MAC address table, both before and after running network communication tests with ping.

a. Establish a console connection to S2 and enter privileged EXEC mode.

b. In privileged EXEC mode, type the show mac address-table command and press Enter. S2# show mac address-table

Even though there has been no network communication initiated across the network (i.e., no use of ping), it is possible that the switch has learned MAC addresses from its connection to the PC and the other switch.

Are there any MAC addresses recorded in the MAC address table?

What MAC addresses are recorded in the table? To which switch ports are they mapped and to which devices do they belong? Ignore MAC addresses that are mapped to the CPU.



If you had not previously recorded MAC addresses of network devices in Step 1, how could you tell which devices the MAC addresses belong to, using only the output from the show mac address-table command? Does it work in all scenarios?

Step 3: Clear the S2 MAC address table and display the MAC address table again.

a. In privileged EXEC mode, type the clear mac address-table dynamic command and press Enter. S2# clear mac address-table dynamic

b. Quickly type the show mac address-table command again. Does the MAC address table have any addresses in it for VLAN 1? Are there other MAC addresses listed?

Wait 10 seconds, type the show mac address-table command, and press Enter. Are there new addresses in the MAC address table?

Step 4: From PC-B, ping the devices on the network and observe the switch MAC address table.

a. From PC-B, open a command prompt and type arp -a. Not including multicast or broadcast addresses, how many device IP-to-MAC address pairs have been learned by ARP?

b. From the PC-B command prompt, ping the router/gateway R1, PC-A, S1, and S2. Did all devices have successful replies? If not, check your cabling and IP configurations.

c. From a console connection to S2, enter the show mac address-table command. Has the switch added additional MAC addresses to the MAC address table? If so, which addresses and devices?

From PC-B, open a command prompt and retype arp -a. Does the PC-B ARP cache have additional entries for all network devices that were sent pings?

Reflection On Ethernet networks, data is delivered to devices by their MAC addresses. For this to happen, switches and PCs dynamically build ARP caches and MAC address tables. With only a few computers on the network this process seems fairly easy. What might be some of the challenges on larger networks?



Router Interface Summary Table

Router Interface Summary

Router Model Ethernet Interface #1 Ethernet Interface #2 Serial Interface #1 Serial Interface #2

1800 Fast Ethernet 0/0 (F0/0)

Fast Ethernet 0/1 (F0/1)

Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)

1900 Gigabit Ethernet 0/0 (G0/0)

Gigabit Ethernet 0/1 (G0/1)

Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)



Serial 0/1/0 (S0/1/0) Serial 0/1/1 (S0/1/1)



Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)

2900 Gigabit Ethernet 0/0 (G0/0)

Gigabit Ethernet 0/1 (G0/1)

Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)

Note: To find out how the router is configured, look at the interfaces to identify the type of router and how many interfaces the router has. There is no way to effectively list all the combinations of configurations for each router class. This table includes identifiers for the possible combinations of Ethernet and Serial interfaces in the device. The table does not include any other type of interface, even though a specific router may contain one. An example of this might be an ISDN BRI interface. The string in parenthesis is the legal abbreviation that can be used in Cisco IOS commands to represent the interface.

©

PT

T

O

B

P

S

S

© 2013 Cisco and

Packet TTraffic

Topology

ObjectivesPart 1: Ge

Part 2: GePart 3: In

BackgrounThis activa PC sendaddress oon the rem

Using theaddresses

For multicinformatiorepresentdropped a

Part 1: G

Step 1: Us

a. Click

b. Enter

Step 2: En

a. Click

b. Click


Tracer -

enerate Unic

enerate Broavestigate Mu

nd/Scenarioity will examinds an ICMP eof the sendingmote router. T

ping commas to view broa

cast traffic, yoon between ros the group oat Layer 3 by

Generate

e ping to ge

PC1 and click

the ping 10.

ter Simulat

the Simulatio

Edit Filters a

All rights reserve

Investig

cast Traffic

adcast Traffiulticast Traff

o ne unicast, brecho request g PC. The desThe packet is

and or the Addadcast traffic.

ou will view EIouters. Routerof EIGRP routall devices ex

Unicast T

enerate traf

k the Deskto

0.3.2 comma

ion mode.

on tab to ente

and verify tha

ed. This docume

gate Uni

c fic

roadcast, andto a remote rostination addrsent only to t

d Complex P

GRP traffic. Ers using EIGRters. Althoughxcept EIGRP

Traffic

ffic.

p tab > Comm

nd. The ping

er Simulation

t only ICMP a

ent is Cisco Publi

cast, Br

d multicast beouter, the souress in the IP the intended d

DU feature of

EIGRP is useRP send packh these packerouters, with

mand Promp

should succe

mode.

and EIGRP ev

ic.

roadcas

ehavior. Mosturce address packet headedestination.

f Packet Trac

ed by Cisco rokets to multicaets are receiveno other proc

pt.

eed.

vents are sele

st, and M

traffic in a nein the IP pacer is the IP ad

cer, you can d

outers to exchast address 2ed by other dcessing requi

ected.

Multicast

etwork is unicacket header isddress of the

directly ping b

hange routing224.0.0.10, whdevices, they aired.

Page 1 of 4

t

ast. When s the IP

interface

broadcast

g hich are

Packet Tracer - Investigate Unicast, Broadcast, and Multicast Traffic


c. Click PC1 and enter the ping 10.0.3.2 command.

Step 3: Examine unicast traffic.

The PDU at PC1 is an ICMP echo request intended for the serial interface on Router3.

a. Click Capture/Forward repeatedly and watch while the echo request is sent to Router3 and the echo reply is sent back to PC1. Stop when the first echo reply reaches PC1.

Which devices did the packet travel through with the unicast transmission?

b. In the Simulation Panel Event List section, the last column contains a colored box that provides access to detailed information about an event. Click the colored box in the last column for the first event. The PDU Information window opens.

What layer does this transmission start at and why?

c. Examine the Layer 3 information for all of the events. Notice that both the source and destination IP addresses are unicast addresses that refer to PC1 and the serial interface on Router3.

What two changes take place at Layer 3 when the packet arrives at Router3?

d. Click Reset Simulation.

Part 2: Generate Broadcast Traffic

Step 1: Add a complex PDU.

a. Click Add Complex PDU. The icon for this is in the right toolbar and shows an open envelope. b. Float the mouse cursor over the topology and the pointer changes to an envelope with a plus (+) sign.

c. Click PC1 to serve as the source for this test message and the Create Complex PDU dialog window opens. Enter the following values:

Destination IP Address: 255.255.255.255 (broadcast address) Sequence Number: 1

One Shot Time: 0

Within the PDU settings, the default for Select Application: is PING. What are at least 3 other applications available for use?

d. Click Create PDU. This test broadcast packet now appears in the Simulation Panel Event List. It also appears in the PDU List window. It is the first PDU for Scenario 0.

e. Click Capture/Forward twice. This packet is sent to the switch and then broadcasted to PC2, PC3, and Router1. Examine the Layer 3 information for all of the events. Notice that the destination IP address is 255.255.255.255, which is the IP broadcast address you configured when you created the complex PDU.

Analyzing the OSI Model information, what changes occur in the Layer 3 information of the Out Layers column at Router1, PC2, and PC3?



f. Click Capture/Forward again. Does the broadcast PDU ever forward on to Router2 or Router3? Why?

g. After you are done examining the broadcast behavior, delete the test packet by clicking Delete below Scenario 0.

Part 3: Investigate Multicast Traffic

Step 1: Examine the traffic generated by routing protocols.

a. Click Capture/Forward. EIGRP packets are at Router1 waiting to be multicast out of each interface. b. Examine the contents of these packets by opening the PDU Information window and click

Capture/Forward again. The packets are sent to the two other routers and the switch. The routers accept and process the packets, because they are part of the multicast group. The switch will forward the packets to the PCs.

c. Click Capture/Forward until you see the EIGRP packet arrive at the PCs.

What do the hosts do with the packets?

Examine the Layer 3 and Layer 4 information for all of the EIGRP events.

What is the destination address of each of the packets?

d. Click one of the packets delivered to one of the PCs. What happens to those packets?

Based on the traffic generated by the three types of IP packets, what are the major differences in delivery?



Suggested Scoring Rubric

Activity Section Question Location

Possible Points

Earned Points

Part 1: Unicast Traffic

Step 3a 10

Step 3b 10

Step 3c 10

Part 1 Total 30

Part 2: Broadcast traffic

Step 1c 10

Step 1e 10

Step 1f 10

Part 2 Total 30

Part 3: Multicast traffic

Step 1c,q1 10

Step 1c, q2 10

Step 1d, q1 10

Step 1d, q2 10

Part 3 Total 40

Total Score 100

Documents

Packet Tracer - Navigating the IOSngarcia/old/RT1415/Ficha 5 Packet Tracer... · 2019. 8. 28. · Part 1: Ga Part 2: Re ackgroun This activ informatio art 1: G Note: Rev types of