PackPack

1010

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ. Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.All rights reserved © 2020

Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary from those shown.

STAGE PAGE46 Rear seat back 156

47 Left front seat base 159

48 Left front seat 162

49 Left front seat 165

50 Left front seat back 168

156

Stage 46: Rear seat back

Your parts: 46A. Rear seat back base 46B. Rear seat back cover 46C. Sponge 46D. Caravan door lock 46E. Caravan door lock inner FP. 2 x 3mm screws IP. 2 x 4mm screws AP. Screws 1.7 x 3mm

157

2 Take the rear seat back base (46A) and place i t under the tabs of the rear seat back cover.1 P lace the sponge (46C ) into the seat back cover (46B).

4 Tighten a fur ther four FP screws into the holes a long the top of the assembly.3 S ec ure the rear seat back cover to the base with e ight FP screws.

6 Here is how the assembled rear seat should look .5 Mount the seat back up against the rear of the inter ior, inser t ing the posts into the holes. S ec ure in place with t wo IP screws.

158

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

7 Inser t the caravan door lock (46D) into the c i rc ular hole in the caravan door (44B). P lace the caravan door lock inner (46E) over

the same hole, and sec ure the par ts together with an AP screw. D on’t over t ighten the screws, the lock should move f reely.

159

Stage 47: Left front seat base

Your parts: 47A. Left front seat left frame 47B. Left front seat right frame 47C. Left front seat base 47D. Spring 47E. Caravan door upper hinge 47F. Caravan door lower hinge AM. 1.7 x 3mm HP. 1.5 x 3mm screws

160

2 S ec ure the lef t f rame to the base with t wo AM screws.1 Connec t the lef t f ront seat lef t f rame (47A) to the lef t f ront seat base (47C ), as shown.

4 S ec ure the r ight f rame to the seat base with t wo AM screws.3 Connec t the r ight f rame (47B) to the other s ide of the seat base.

6 S ec ure the lower hinge (47F) to the outs ide of the door with three more HP screws.5 S ec ure the caravan door upper hinge (47E) to the outs ide of the

caravan door with three HP screws, as shown.

161

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

7 Inser t the spr ing (47D) into the caravan door lock guide, onto the lock inner.

162

Your parts: 48A. Left front seat cover 48B. Sponge 48C. Left front seat frame 48D. Caravan door inner CP. 1.7 x 4mm FP. 2 x 3mm screws

Stage 48: Left front seat

163

2 S ec ure the f rame with t wo CP screws.1 Inser t the lef t f ront seat f rame (48C ) into the corresponding holes in the unders ide of the seat base.

3 Place the sponge (48B) onto the top of the seat. 4 P l a ce t h e l e f t f ro nt s e at cove r ( 4 8 A) o nto t h e s e at a s s e m b l y, l i f t ing the tabs of the cover over the base.

164

6 Fix the caravan door inner (48D) to the caravan door with t wo FP screws.5 S ec ure the cover f rom underneath with four CP screws.

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

165

Your parts: 49A. Left front seat base frame 49B. Left front seat back mount 49C. Internal vent grille NM. 2 x 6mm screws BP. 1.5 x 4mm screws HP. 1.5 x 3 x 2.5mm screws

Stage 49: Left front seat

166

2 Use t wo NM screws to sec ure the base f rame.1 Place the f ront seat base f rame (49A) onto the seat s ide f rames, a l igning the holes of both.

3 S ec ure the internal vent gr i l le (49C ) to the ins ide of the caravan door with four BP screws. 4 Fit the caravan door into the space in the caravan wal l, a l igning

the holes of the hinges with the holes in the wal ls. S ec ure the upper hinge in place with t wo HP screws.

167

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

5 S ec ure the lower hinge with t wo more HP screws.

168

Your parts: 50A. Left front seat back 50B. Caravan roof cover IP. 2 x 4mm screws OM. 1.7 x 6mm screws PM. 2 x 3 x 6mm screws

Stage 50: Left front seat back

169

2 Fit the seat back into the rear of the seat, a l igning the holes of the mounts with those in the f rames of the seat.1 Fix the t wo lef t f ront seat back mounts (49B) to the holes at the

bottom of the seat back with t wo IP screws.

3 S ec ure the t wo par ts of the seat together with t wo OM screws. 4 Place the posts on the bottom of the lef t f ront seat into the s lots in the f loor, as indicated.

170

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

5 Hold the seat in place and sec ure into posit ion f rom underneath the f loor with t wo PM screws.