Sales Advisory

Parker Hannifin Corporation Industrial Hose Division 17295 Foltz Industrial Pkwy Strongsville, OH 44149 Telephone: (440) 268-2120 Fax: (440) 268-2230 www.safehose.com NEW PRODUCT

(Continued on page 2)

PA 2012.02.002 Series 7311, 7311XT Frac Hose

Series 7311 Frac Blender Hose Series 7311XT X-TREME™ Abrasion Resistant Frac Blender Hose High Pressure Fluid Transfer

Series 7311 is a versatile discharge hose designed to handle brine, mild chemicals, petroleum waste, sediments, sludge, sand slurries and water in oil field applications such as frac blender and tank service. The hose construction incorporates a heavy wall for additional abrasion resistance and durability and a static dissipating tube that provides a path to conduct a static electrical charge to ground. The blended SBR cover is resistant to abrasion and weathering.

Series 7311XT features a layer of ultra high molecular weight polyethylene (UHMWPE) bonded to the cover for extreme abrasion resistance and service life. Series 7311 and 7311XT are available in 200-foot continuous lengths through 4" ID.

NOTE: Do not use with refined oil or fuel.

If there are any questions please contact Parker Customer Service toll-free at:

866.810.HOSE (4673) 800.242.HOSE (4673) Strongsville, OH South Gate, CA Eastern USA Western USA

Sales Advisory

Parker Hannifin Corporation Industrial Hose Division

Page 2

PA 2012.02.002 Series 7311, 7311XT Frac Hose

Series 7311 Frac Blender Hose Series 7311XT X-TREME™ Abrasion Resistant Frac Blender Hose High Pressure Fluid Transfer

Tube: Black SBR blend; abrasion resistant and static dissipating Reinforcement: Multiple textile plies Cover: Black SBR blend; wrapped finish. XT also incorporates a clear abrasion

resistant ultra high molecular weight polyethylene (UHMWPE) layer bonded to the cover.

Temp Range: -20°F to +180°F (-28°C to +82°C) Brand Method: Yellow text on blue stripe Brand Example: PARKER SERIES 7311(XT) FRAC BLENDER HOSE 400 PSI MAX WP

MADE IN USA Design Factor: 4:1 Industry Standards: None applicable Applications: • Brine, fracturing fluids, mild chemicals, petroleum waste, sediments, sludge, sand slurries, water • Frac tank transfer, oil field waste recovery, general industrial Vacuum: Not recommended Compare To: Thermoid Transporter Oilfield Frac; Veyance Plicord Oilfield Frac Packaging: Coils

Part Number

ID (in)

ID (mm)

Reinf Plies

OD (in)

OD (mm)

Approx Wt

(lbs/ft)

Approx Wt

(kgs/ft)

Min Bend Rad (in)

Min Bend Rad

(mm)

Max Rec WP (psi)

Max Rec WP

(bar)

Perm Cplg Rec

*

Std Pack Qty (ft)

Stock Status

**

7311-3000 3 76.2 4 3.840 97.5 2.08 0.94 30.0 762.0 400 27.6 * 100 N

7311-4000 4 101.6 4 4.830 122.7 2.59 1.17 40.0 1016.0 400 27.6 * 100 Y

7311-6000 6 152.4 6 7.110 180.6 5.21 2.36 60.0 1524.0 400 27.6 * 100 N 7311XT-3000 3 76.2 4 3.920 99.6 2.32 1.05 36.0 914.4 400 27.6 * 100 N

7311XT-4000 4 101.6 4 4.950 125.7 3.08 1.40 48.0 1219.2 400 27.6 * 100 Y

Note: Minimum Bend Radius is considered reference only

* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications. ** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.

.

WARNING! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.