Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
KE11001-1308-005
ISO9001 CertifiedJQA-1317
OPTICAL DEVICESFOR PHOTONIC
NETWORKS
http:// www.fdk.co.jp 2
Optical isolators
FDK’s optical isolators come in the free space type for LD modules and thein-line type for optical fiber amplifiers, and are lined up according to shapesand characteristics.
Hybrid optical isolatorsThese composite devices incorporate optical isolators, coupler and WDMfilters, all of which are necessary components for optical fiber amplifiers.
Optical filter devicesThese composite devices incorporate ASE noise blocking filter, pump noiseblocking filter, C/L band separator filter etc., all of which are necessary devicesfor optical fiber amplifiers.
Polarization combinersFDK’s reliable polarization combiners combine two polarized pump soursesinto one to yield single high pump power.
Optical circulatorsApplying the Faraday effect of LPE film, these circulators are used for OADMand optical measuring instruments.
Optical switchesOur optical switches are much better than mechanical switches in switchingspeed, reliability and durability, due to the exclusion of any moving parts.They are suitable for switching optical paths in large-capacity opticalcommunications.
Variable optical attenuators (VOA s)Applying the Faraday effect of LPE film, the variable optical attenuators(VOA’s) features high speed response and high reliability comared withmechanical VOAs, due to the exclusion of any moving parts.
Optical couplers FDK’s ion exchanged PCL type couplers are used for variety in opticalnetworks.
FDK produces compact, high-performance and quality optical devices, using its original, Bi-substitutedgarnet thick films (LPE film) and other strictly selected materials. This catalog introduces a wide varietyof standard FDK optical devices.
Free space optical isolators
In-Iine optical isolators
Hybrid with a coupler(YM-4000 type)
Hybrid with a built-in WDM filter,for forward pumping
(YM-5000 type)
Hybrid with a built-in WDM filter,for backward pumping
(YM-6000 type)
Hybrid with a coupler and a built-inWDM filter,for forward pumping
(YM-7000 type)
Optical filter devices
(YM-1000 series)
Polarization combiners
(YM-1100 series)
Optical circulators
(YC-1000 series)
Optical switches
(YS-1000 series)
Variable optical attenuators
(YS-500 series)
Optical couplers
(YW-1000 series)
3
4
7
8
9
10
11
15
16
18
20
22
Contents Page
1) Fiber type : Change of fiber type may be available on request.2) Connectors : Connectors will be available on request, except for free space optical isolators.3) L-band applications : Optical devices of above category may be available for L-band applications.
http:// www.fdk.co.jp 3
Free space optical isolatorsYD-109 type / YD-209 type
The YD-109/YD-209 optical isolators provide an aperture of φ1.2mm. These optical isolators can be connected perpendicularly to a laser diode with very small end-face reflection. Besides theproducts use LPE films.
109 type 209 type
Unit = mm
Shapes and dimensions
φ φ
3.2
4.0
6.2
4.0
Specifications
ItemsPart No.
Center wavelength p
Isolation
Insertion loss
Aperture diameter
Faraday rotator
YD-209-155YD-109-155
1.31 m
30dB min. (38dB)
0.5dB max.(0.2dB)
60dB min. (62dB)
1dB max. (0.4dB)
1.2mm
Bi-substituted iron garnet thick films
( )Typical
YD-109-130 YD-109-148 YD-209-130 YD-209-148
1.48 m 1.55 m 1.48 m1.31 m 1.55 mµ µ µ µ µ µ
φ
λ
λ
λ
p, 25
p, 25
C
C
Conditions
Polarization-dependent
High isolation
Low insertion loss
High reliability (Epoxy free)
Minimized end-face reflection
•••••
Features
http:// www.fdk.co.jp 4
YD-3600 type (Low polarization mode dispersion )
In-line optical isolators
Part No.
0.6dB max. (0.4dB)
0.7dB max. (0.5dB)
0.10dB max. (0.02dB)
35dB min. (40dB)
0.05ps max. (0.01ps)
1W
Operating temp. range To
Storage temp. range Ts
( )Typical
Wavelength
Insertion loss
Polarization dependent loss
Isolation
Polarization mode dispersion
Return loss
Max. incident power
Fiber type
YD-3600-1-130S YD-3600-1-155SYD-3600-1-148S YD-3600-1-159SConditionsItems
Specifications
C
1.31 mµ 1.48 mµ 1.55 mµ 1.59 mµ
40 to 85 C
0 to 70 C
λ
λ
λ
λ
λ
λ
λ
λ
λ
@23 ,
To , 15nm
To ,
@23 ,
To , 15nm
To,
To, 55dB min. (60dB)
SMF Length : 2m
Unit = mm
35
(41)
5
Shapes and dimensions
YD-3600-1-130S YD-3600-1-155SYD-3600-1-148S YD-3600-1-159S
φ
C
20dB min. (23dB) 22dB min. (25dB)
Rubber boots
The YD-3600 is a polarization-independent optical isolator foroptical communications. Using FDK’s original precision fibercollimator in its input / output section, the YD-3600 has attained ahigh isolation and a low insertion loss. Further, its laser-weldedinner connection ensures a superb reliability and durability.Besides the product uses LPE films.
Low polarization mode dispersion
Polarization independent
Low insertion loss
High isolation
••••
Features
http:// www.fdk.co.jp 5
In-line optical isolatorsYD-3700 type
Part No.
0.6dB max. (0.4dB)
0.7dB max. (0.5dB)
0.10dB max. (0.02dB)
35dB min. (40dB)
1.0ps max. (0.7ps)
1W
Operating temp. range To
Storage temp. range Ts
( )Typical
Wavelength
Insertion loss
Polarization dependent loss
Isolation
Polarization mode dispersion
Return loss
Max. incident power
Fiber type
YD-3700-1-130S YD-3700-1-148S YD-3700-1-155S YD-3700-1-159SConditionsItems
Specifications
1.31 mµ 1.48 mµ 1.55 mµ 1.59 mµ
40 to 85 C
0 to 70 C
λ
55dB min. (60dB)
Unit = mm
Shapes and dimensions
C λ
λ
λ
λ
λ
λ
λ
λ
@23 ,
To , 15nm
To ,
@23 ,
To , 15nm
To,
To,
C
22dB min. (25dB)20dB min. (23dB)
SMF Length : 2m
35
(41)
5
YD-3700-1-130S YD-3700-1-155SYD-3700-1-148S YD-3700-1-159S
φ
Rubber boots
The YD-3700 is a polarization-independent optical isolator foroptical communications. Using FDK’s original precision fibercollimator in its input / output section, the YD-3700 has attained ahigh isolation and a low insertion loss. Further, its laser-weldedinner connection ensures a superb reliability and durability. Besides the product uses LPE films.
Polarization-independent
Low insertion loss
High isolation
•••
Features
6
In-line optical isolatorsYD-4600 type (Low polarization mode dispersion)
http:// www.fdk.co.jp
Part No.
0.7dB max. (0.5dB)
0.8dB max. (0.6dB)
0.10dB max. (0.02dB)
50dB min. (55dB)
0.05ps max. (0.01ps)
1W
Operating temp. range To
Storage temp. range Ts
( )Typical
Wavelength
Insertion loss
Polarization dependent loss
Isolation
Polarization mode dispersion
Return loss
Max. incident power
Fiber type
YD-4600-1-130S YD-4600-1-148S YD-4600-1-155S YD-4600-1-159SConditionsItems
Specifications
1.31 mµ 1.48 mµ 1.55 mµ 1.59 mµ
40 to 85 C
0 to 70 C
λ
55dB min. (60dB)
Unit = mm
Shapes and dimensions
C λ
λ
λ
λ
λ
λ
λ
λ
@23 ,
To , 15nm
To ,
@23 ,
To , 15nm
To,
To,
C
40dB min. (43dB) 42dB min. (45dB)
SMF Length : 2m
35
(41)
5
YD-4600-1-130S YD-4600-1-155SYD-4600-1-148S YD-4600-1-159S
φ
Rubber boots
The YD-4600 is a polarization-independent optical isolator use tooptical communications. Using FDK’s original precision fibercollimator in its input / output section, the YD-4600 has attained ahigh isolation and a low insertion loss. Further, its laser-weldedinner connection ensures a superb reliability and durability. Besidesthe product uses LPE films.
Low polarization mode dispersionPolarization-independentLow insertion lossHigh isolation
••••
Features
7http:// www.fdk.co.jp
Hybrid optical isolatorsYM-4000 type (Built-in coupler)
( )Typical
Specifications
Signal insertion loss
Signal PDL
Coupling ratio
Signal isolation
Return loss
Polarization mode dispersion
Input/output fiber
Items Ports
I O
I O
I S
O I
I, O, S
I, O, S
1.55 m, 25
1.55 m, To
1.55 m, Toµ
µ C
Conditions
µ
Diameter : 0.25mmφ
Part No.
YM-4013 YM-4063 YM-4061
0.8dB max. (0.6dB)0.7dB max. (0.5dB)
0.1dB max. (0.02dB)
35dB min. (40dB)
55dB min. (60dB)
0.1ps max. (0.01ps)
50dB min. (55dB)
0.9dB max. (0.7dB)
Corning SMF-28 CPC6 Length : 2mTM
Operating temp. range To
Storage temp. range Ts 40 to 85 C
0 to 70 C
Shapes and dimensions Diagram
Unit = mm
φ
Coupler IsolatorSignal Signal
Monitor
I
S
O40
(44)�
5.5
SMF-28 is a registered trademark of Corning Incorporated in U.S.A.TM
1.6 2.4% 2.4 3.6%
Available for L-band and C+L-band
Optical signal amplification in optical transmission lines is carried out by optical fiber amplifiers (EDFA). The YM-4000 type, which is the combination of an isolator and a coupler, is connected to the amplifier to assist performance.
Designed for EDFA
High isolation
Low insertion loss
High reliability
Compact size, φ5.5mm
•••••
Features
8http:// www.fdk.co.jp
Hybrid optical isolatorsYM-5000 type (Built-in WDM filter, for forward pumping)
Specifications
Items
Signal insertion loss
Signal PDL
Pump insertion loss
Pump PDL
Signal isolation
Return loss
Polarization mode dispersion
Input/output fiber
Ports Conditions
1.55 m, 25
1.55 m, To
Diameter: 0.25mm
Part No.
YM-5010 YM-5060 YM-5011 YM-5061
0.1dB max. (0.02dB)
0.6dB max. (0.4dB)
0.7dB max. (0.5dB) 0.7dB max. (0.5dB)
0.1dB max. (0.02dB)
0.1dB max. (0.02dB)
0.6dB max. (0.5dB)
0.1dB max. (0.02dB)
0.8dB max. (0.6dB) 0.8dB max. (0.6dB)
35dB min. (40dB)
55dB min. (60dB) 55dB min. (60dB)
50dB min. (55dB) 35dB min. (40dB) 50dB min. (55dB)
0.1ps max. (0.01ps) 0.1ps max. (0.01ps)
Corning SMF-28 CPC6 Length : 2m
Corning SMF-28 CPC6 Length : 2m
Corning Flexcor 1060 Length : 2m
Operating temp. range To
Storage temp. range Ts
I
O
P
I , O
1.48 m pumping 0.98 m pumping
I O
P O
O I
I O
1.48/0.98 m, To
1.55 m, To
1.55 m, To
0 to 70
40 to 85
C
C
µ
µ µ
µ
µ
µ
µ
φ
C
TM
TM
TM
( )Typical
Shapes and dimensions Diagram
Unit = mm
WDMIsolatorSignal
Signal
Pump
Pump
I
P
O40
5.5
φ
SMF-28 and Flexcor are resistered trademarks of Corning Incorporated in U.S.A.TM TM
(44)�
Available for L-band and C+L-band
Optical signal amplification in optical transmission lines is carriedout by optical fiber amplifiers (EDFA). The YM-5000 type, which is the combination of an isolator and a WDM filter, is connected to the amplifier to assist it by forward pumping.
Designed for forward pumping of EDFA
High isolation
Low insertion loss
High reliability
Compact size, φ5.5mm
•••••
Features
9http:// www.fdk.co.jp
Hybrid optical isolatorsYM-6000 type (Built-in WDM filter, for backward pumping)
Specifications
Items
Signal insertion loss
Signal PDL
Pump insertion loss
Pump PDL
Signal isolation
Return loss
Polarization mode dispersion
Input/output fiber
Ports Conditions
1.55 m, 25
1.55 m, To
Diameter: 0.25mm
Part No.
YM-6010 YM-6060 YM-6011 YM-6061
0.1dB max. (0.02dB)
0.6dB max. (0.4dB)
0.7dB max. (0.5dB) 0.7dB max. (0.5dB)
0.1dB max. (0.02dB)
0.1dB max. (0.02dB)
0.6dB max. (0.5dB)
0.1dB max. (0.02dB)
0.8dB max. (0.6dB) 0.8dB max. (0.6dB)
35dB min. (40dB)
55dB min. (60dB) 55dB min. (60dB)
50dB min. (55dB) 35dB min. (40dB) 50dB min. (55dB)
0.1ps max. (0.01ps) 0.1ps max. (0.01ps)
Corning SMF-28 CPC6 Length : 2m Corning SMF-28 CPC6 Length : 2m
Corning Flexcor 1060 Length : 2m
Operating temp. range To
Storage temp. range Ts
I
O
P
I , O
1.48 m pumping 0.98 m pumping
I O
P I
O I
I O
1.48/0.98 m, To
1.55 m, To
1.55 m, To
0 to 70
40 to 85
C
C
µ
µ µ
µ
µ
µ
µ
φ
C
TM TM
TM
Corning Flexcor 1060 Length : 2mTM
( )Typical
Shapes and dimensions Diagram
Unit = mm
WDM IsolatorSignalPump
Pump
I
P
O
Signal
φ
40
5.5
SMF-28 and Flexcor are resistered trademarks of Corning Incorporated in U.S.A.TM TM
(44)�
Available for L-band and C+L-band
Optical signal amplification in optical transmission lines is carriedout by optical fiber amplifiers (EDFA). The YM-6000 type, which is the combination of an isolator and a WDM filter, is connected to the amplifier to assist it by backward pumping.
Designed for backward pumping of EDFA
High isolation
Low insertion loss
High reliability
Compact size, φ5.5mm
•••••
Features
10http:// www.fdk.co.jp
Hybrid optical isolatorsYM-7000 type (Built-in coupler and WDM filter)
Operating temp. range To
Storage temp. range Ts
0 to 70
40 to 85
C
C
Shapes and dimensions Diagram
Unit = mm
40
(47)
5.5
Isolator WDM
I
S
O
P
SignalSignal
Pump
Monitor Pump
Coupler
φ
SMF-28 and Flexcor are resistered trademarks of Corning Incorporated in U.S.A.TM TM
Specifications
Items
Signal insertion loss
Signal PDL
Pump insertion loss
Pump PDL
Signal isolation
Coupling ratio
Return loss
Polarization mode dispersion
Fiber
Ports Conditions
1.55 m, 23
1.55 m, To
Part No.
YM-7010 YM-7310 YM-7360 YM-7011 YM-7311 YM-7361
0.1dB max. (0.02dB)
0.6dB max. (0.4dB)
0.9dB max. (0.8dB) 0.9dB max. (0.8dB)
0.1dB max. (0.02dB)
0.1dB max. (0.02dB)
0.7dB max. (0.5dB)
0.1dB max. (0.02dB)
1.0dB max. (0.9dB) 1.0dB max. (0.9dB)
35dB min. (40dB)
55dB min. (60dB)
50dB min. (55dB)
55dB min. (60dB)
1.0ps max. (0.7ps) 0.1ps max. (0.01ps)
50dB min. (55dB)
Corning SMF-28 CPC6 Length : 2mCorning SMF-28 CPC6 Length : 2m
Corning Flexcor 1060 CPC6 Length : 2m
I , S
I , S
O , P
1.48 m pumping 0.98 m pumping
I O
P O
O I
O , P
1.48/0.98 m, To
1.55 m, To
1.55 m, To
I S
I O
µ
1.55 m, Toµ
µ µ
µ
1.48/0.98 m, Toµ
µ
µ
µ
C
TM
TM
TM
( )Typical
1.0ps max. (0.7ps) 0.1ps max. (0.01ps)
35dB min. (40dB) 50dB min. (55dB)
Available for L-band and C+L-band
0.8 1.2% 1.6 2.4% 0.8 1.2% 1.6 2.4%
Optical signal amplification in optical transmission lines is carriedout by optical fiber amplifiers (EDFA). The YM-7000 type , whichis the combination of an isolator, a coupler and a WDM filter, isconnected to amplifier to assist its performance by forwardpumping.
Designed for EDFA
High reliability
Built-in 2% coupler, 980/1550nm WDM filter
Compact size, φ5.5mm
••••
Features
11http:// www.fdk.co.jp
Optical filter devices1480/1550 WDM (YM-1045 type)
Specifications
Items
Pump bandPort 1 3
Conditions
( )Typical
Shapes and dimensions Diagram
Unit = mm
WDM filter1 1480nm &2 1550nm1
2
3
2 1550nm
λλ
λ
1 1480nmλ
Wavelength range 1
Insertion loss
Flatness
Wavelength range 2
Insertion loss
Flatness
@ 1 (1 2)
@ 2 (2 1)
Part No.
YM-1045
1460~1490nm
0.6dB max.(0.4dB)
0.1dB max.(0.06dB)
1530~1565
0.5dB max.(0.3dB)
0.1dB max.(0.04dB)
60dB min.(65dB)
60dB min.(65dB)
55dB min.(60dB)
0.05dB max.(0.02dB)
0.05ps max.(0.01ps)
Signal bandPort 2 3
Directivity
Optical return loss
Polarization dependent loss
Polarization mode dispersion
λ
λ
λ
λ
36
(40)�
φ5.
5
The YM-1045 type incorporates 1480nm/1550nm WDM filter, ofwhich is necessary device for optical fiber amplifires.
Designed for EDFA systems
Low insertion loss
Compact size
•••
FeaturesLow wavelength flatness
High reliability
••
12http:// www.fdk.co.jp
Optical filter devicesC/L-band separator (YM-1056 type)
Specifications
Items
C-band channelPort 1 3
Conditions
( )Typical
Shapes and dimensions Diagram
Unit = mm
WDM filter1 1550nm &2 1590nm1
2
3
2 1590nm
λλ
λ
1 1550nmλ
Wavelength range 1
Insertion loss
Flatness
Rejection @ 2
Wavelength range 2
Insertion loss
Flatness
Rejection @ 1
@ 1 (1 2)
@ 2 (2 1)
Part No.
YM-1056
1535~1563nm
0.7dB max.(0.5dB)
0.1dB max.(0.06dB)
20dB min.(25dB)
1569~1615
0.6dB max.(0.4dB)
0.1dB max.(0.06dB)
15dB min.(20dB)
55dB min.(60dB)
60dB min.(65dB)
55dB min.(60dB)
0.05dB max.(0.02dB)
0.05ps max.(0.01ps)
L-band channelPort 2 3
Directivity
Optical return loss
Polarization dependent loss
Polarization mode dispersion
λ
λ
λ
λ
λ
λ
36
(40)�
φ5.
5
The YM-1056 type incorporates C/L band separator filter, of whichis necessary device for optical fiber amplifires.
Designed for C-band/L-bandin dual-band EDFA systems
Low insertion loss
High level rejection
•
••
FeaturesCompact size
Wide signal band
Low wavelength flatness
High reliability
••••
13http:// www.fdk.co.jp
Applications
ASE noise blocking
Pump noise blocking
Applications
Fiber amplifier pumping(980/1550WDM)
Fiber amplifier pumping(1480/1550WDM)
Fiber amplifier pumping(1480/1550WDM)
Supervisory WDM(1510/1550WDM)
Wide-band WDM(1310/1550WDM)
Applications
Fiber amplifier pumping(980/1570WDM)
Fiber amplifier pumping(1480/1570WDM)
C/L band separator(1550/1590WDM)
Part No.
YM-120
YM-100
Part No.
YM-1051
YM-1054
YM-1045
YM-1025
YM-1035
Part No.
YM-1061
YM-1046
YM-1056
Signal bandwidthinsertion loss
1542-1562nm0.7dB max. (0.5dB typ.)
1530-1565nm0.8dB max. (0.6dB typ.)
Pass bandwidthinsertion loss
1530-1565nm0.6dB max. (0.4dB typ.)
1530-1565nm0.6dB max. (0.4dB typ.)
1460-1490nm0.6dB max. (0.4dB typ.)
1500-1520nm0.7dB max. (0.5dB typ.)
1260-1360nm0.7dB max. (0.5dB typ.)
Pass bandwidthinsertion loss
1565-1610nm0.7dB max. (0.5dB typ.)
1460-1490nm0.6dB max. (0.4dB typ.)
1530-1563nm0.7dB max. (0.5dB typ.)
Rejection bandwidthisolation
1510-1532nm20dB min. (25dB typ.)
1460-1490nm30dB min. (35dB typ.)
Reflect bandwidthinsertion loss
960-1000nm0.6dB max. (0.4dB typ.)
1460-1490nm0.5dB max. (0.3dB typ.)
1530-1565nm0.5dB max. (0.3dB typ.)
1530-1565nm0.5dB max. (0.3dB typ.)
1530-1565nm0.5dB max. (0.3dB typ.)
Reflect bandwidthinsertion loss
960-1000nm0.6dB max. (0.4dB typ.)
1565-1610nm0.6dB max. (0.4dB typ.)
1569-1615nm0.6dB max. (0.4dB typ.)
Noise rejection filters
(1 1 port)
WDM couplers
(1 2 port)
WDM couplers
(1 2 port)
C-b
and
serie
s(S
igna
l wav
elen
gth
1530
-156
5nm
)L-
band
ser
ies
(Sig
nal w
avel
engt
h 15
65-1
610n
m)
List of optical filter devices
ltems
ltems
ltems
14http:// www.fdk.co.jp
Applications
Fiber amplifier pumping
Applications
Fiber amplifier pumping
Applications
Fiber amplifier pumping
Fiber amplifier pumping
Part No.
YM-2554
Part No.
YM-1061 (CL)
YM-1064 (CL)
YM-1046 (CL)
Part No.
YM-1004 (A)
YM-1004 (B)
YM-1004 (C)
YM-1001
Part No.
YM-1045 (R)
YM-1054 (R)
YM-1046 (R)
Tap ratio
5% (=13dB)
Pass band insertion loss
1530-1610nm0.6dB max. (0.4dB typ.)
1530-1610nm0.6dB max. (0.4dB typ.)
1420-1490nm0.6dB max. (0.4dB typ.)
Pass band insertion loss
1481-1497nm0.6dB max. (0.4dB typ.)
1483-1506nm0.6dB max. (0.4dB typ.)
1456-1490nm0.6dB max. (0.4dB typ.)
975 0.5nm0.6dB max. (0.4dB typ.)
Pass band insertion loss
1400-1495nm0.6dB max. (0.4dB typ.)
1530-1565nm0.6dB max. (0.4dB typ.)
1400-1495nm0.6dB max. (0.4dB typ.)
Pass band insertion loss
1530-1565nm0.7dB max. (0.5dB typ.)
Reflect band insertion loss
960-1000nm0.6dB max. (0.4dB typ.)
1460-1490nm0.6dB max. (0.4dB typ.)
1530-1610nm0.6dB max. (0.4dB typ.)
Reflect band insertion loss
1455-1472nm0.6dB max. (0.4dB typ.)
1462-1477nm0.6dB max. (0.4dB typ.)
1420-1446nm0.6dB max. (0.4dB typ.)
980 0.5nm0.6dB max. (0.4dB typ.)
Reflect band insertion loss
1510-1565nm0.6dB max. (0.4dB typ.)
1400-1505nm0.6dB max. (0.4dB typ.)
1565-1610nm0.6dB max. (0.4dB typ.)
Reflect band insertion loss
1460-1490nm0.6dB max. (0.4dB typ.)
WDM couplers
Wavelength
combiners
WDM couplers(C-band)
WDM couplers(L-band)
C+
L-ba
nd s
erie
sP
ump
com
bine
r se
ries
Ram
an s
erie
sC
-ban
d se
ries
List of optical filter devices
ltems
ltems
ltems
ltems
Tap+WDM couplers(2 2 port)
Package size : 5.5 L40mmφ
15http:// www.fdk.co.jp
YM-1100 series
Part No.
Operating temp. range To
Storage temp. range Ts
( )Typical
Wavelength
Port
Insertion loss
Return loss
Directivity
Input / output fiber
YM-1101 YM-1104Items
Specifications
C
0.98 mµ 1.48 mµ
40 to 85 C
0 to 70 C
3
0.6dB [email protected] m, 23 (0.5dB)
48dB min. (50dB)
55dB min. (60dB)
Unit = mm
PMF : Polarization maintaining fiberSMF : Single mode fiber
59max.
(63)
5.5
Shapes and dimensions Diagram
φ
µ
Input fiber : Polarization-maintaining fiber Length : 1m / Output fiber : Single mode fiber Length : 1m
C
3
0.5dB [email protected] m, 23 (0.4dB)
50dB min. (53dB)
55dB min. (60dB)
µ
P1 port PMF
PMFP2 port
O port
SMFCombiner
The YM-1101 and YM-1104 are polarization combiners. For anoptical fiber amplifier, a high optical pump power is needed to obtainhigh gain. Polarization combiners combine two polarized pumpsources into one and they yield single high pump power.
Compact size
Low insertion loss
Designed for EDFA systems
High reliability
••••
Features
Polarization combiners
16http:// www.fdk.co.jp
Optical circulatorsYC-1100 type / YC-1250 type
Part No.
0.6dB max. (0.5dB)
0.8dB max. (0.7dB)
0.8dB max. (0.6dB)
1.0dB max. (0.8dB)
0.1dB max. (0.01dB)
0.1dB max. (0.5dB)
50dB min.
40dB min.
0.1ps max. (0.01ps)
50dB min. (60dB)
50dB min. (65dB)
Operating temp. range To
Storage temp. range Ts
( )Typical
Wavelength
Port
Insertion loss
Polarization dependent loss
Isolation
Polarization mode dispersion
Return loss
Directivity
Fiber type
YC-1100-155 YC-1250-155YC-1100-159ConditionsItems
Specifications
C
1.55 m
3
µ 1.59 m
3
µ 1.55 m
4
µ
40 to 85 C
0 to 70 C
λ
λ
λ
λ
λ
λ
λ
λ
λ
λ
23 ,
To , 15nm
23 ,
To , 15nm
23 ,
To , 15nm
To , 15nm
To,
To , 15nm
P1 P2
P3
Diagram
Operation of optical circulator (direction of optical transmittance)
YC-1100 type
C
Corning SMF-28 Length : 1.5m
C
P1 P2
P3
YC-1250 type
P4
SMF-28 is a registered trademark of Corning Incorporated in U.S.A.TM
TM
This optical circulator is a passive device for optical transmissionsystems, applying the Faraday effect of LPE film. It has attaineda outstanding characteristics (high isolation, low insertion loss )and compact size.
Compact size
High isolation
High reliability
Polarization-independent
••••
Features
17http:// www.fdk.co.jp
Shapes and dimensions
Unit = mm
YC-1100 type YC-1250 type
59
(63)
72
5.5
φ
6.8
φ
(76)
18http:// www.fdk.co.jp
YS-1200 type / YS-1101 type / YS-1001 type
Part No.
Operating temp. range To
Storage temp. range Ts
( )Typical
Wavelength
Port
Insertion loss
Polarization dependent loss
Crosstalk
Polarization mode dispersion
Return loss
Coil inductance
Response time
Recommendation drivecondition
Fiber type
YS-1200-155
2input / 2output
YS-1001-155
1input / 2output
YS-1101-155ConditionsItems
Specifications
1.55 m
2input / 1output
1.0dB max. (0.8dB)
0.1dB max. (0.01dB)
40dB min. (50dB)
0.1ps max. (0.01ps)
50dB min. (60dB)
12mH
1 msec max. (0.6 msec)
200 mA
2 msec
Corning SMF-28 Length : 1.5m
µ
40 to 85 C
0 to 65 C
λ
λ
λ
λ
λ
λ
To , 15nm
To , 15nm
To , 15nm
To , 15nm
To ,
23
23
Power current
Pulse width
Diagram
C
C
Output port
Output port
State A : T1+, T2-
Input port 1
Input port 2
YS-1101 type
State B : T1-, T2+
Input port 1
Input port 2
Input port
State A : T1+, T2-
Output port 1
Output port 2
YS-1001 type
Input port
State B : T1-, T2+
Output port 1
Output port 2
State A : T1+, T2-
YS-1200 type
Input port 1Input port 2
Output port 1Output port 2
State B : T1-, T2+
Input port 1Input port 2
Output port 1Output port 2
SMF-28 is a registered trademark of Corning Incorporated in U.S.A.TM
TM
These optical switches are self latching type applying the Faraday effect of LPE film. Due to the exclusion of any moving parts basednon-mechanical structures, they have attained a high reliabilityand rapid switching speed, and furthermore, using the two-holeferrule collimator, attained high isolation, low insertion loss andcompact size.
Non-mechanical (Magneto-optical)
High reliability • Latching type
High speed switch • Low crosstalk
Polarization-independent
••••
Features
Optical switches
19http:// www.fdk.co.jp
Shapes and dimensions
(77)
43
36.9 0.1
7.1
φ
+ _
24.5
0
.1
30.5+ _
18.5
3
8
9
Unit = mm
24.9 0.1+ _4- 2.4φ
20http:// www.fdk.co.jp
Variable optical attenuators (VOA)YS-500 series
Part No.
20dB min. (23dB) 18dB min. (20dB) 30dB min. (35dB)
1.5dB max. (0.8dB)
1.7dB max. (1.5dB)
0.5dB max. (0.25dB)
1.0dB max.
0.1ps max. (0.05ps)
50dB min. (55dB)
1ms max. (320 sec)
SMF Length : 2m
Operating temp. range To
Storage temp. range Ts
C-band (1.53~1.56 m) L-band (1.575~1.605 m) ( )Typical
Wavelength
Driving current
Maximum attenuation
Minimum attenuation
Polarization dependent loss
Wavelength dependent loss
Polarization mode dispersion
Return loss
Response speed
Input/output fiber
YS-500 YS-504ConditionsItems
Specifications
40 to 85 C
0 to 65 C
λ
Cλ
λ
, 25
To , , I
Under 10dB attenuation
Under 10dB attenuation
L-bandC-band L-bandC-band
0~70mA
Part No.
30dB min. (35dB) 15dB min. 30dB min. (35dB)
1.5dB max. (0.8dB)
1.7dB max. (1.5dB)
0.1ps max. (0.05ps)
50dB min. (55dB)
1ms max. (320 sec)
SMF Length : 2m
Wavelength
Driving current
Maximum attenuation
Minimum attenuation
Polarization dependent loss
Wavelength dependent loss
Polarization mode dispersion
Return loss
Response speed
Input/output fiber
YS-505 YS-508YS-506ConditionsItems
λ
Cλ
λ
, 25 0mA
,To , 0mA
Under 10dB attenuation
Under 17dB attenuation
Under 10dB attenuation
Under 20dB attenuation
L-band C-bandC-band L-bandC-band
0~70mA
0.3dB max. (0.2dB)
0.5dB max. (0.3dB)
1.0dB max. 0.4dB max.
0.8dB max.
µ
µ
µ µ
0.5dB max. (0.25dB)
The YS-500 is a variable optical attenuator applying the Faraday effectof LPE film. The attenuation levels can be adjusted continuouslyby current control. Due to the exclusion of any moving parts, it hasattained a high reliability and rapid response time.
Non-mechanical (Magneto-optical)
Current control • High speed response
Polarization-independent • High reliability
•••
Features
21http:// www.fdk.co.jp
Shapes and dimensions
YS-500 type
YS-504 type
YS-506 type
YS-508 type
Unit = mm
158
23
43
(57)
YS-500-155
0Ser.No.I253440
0.315
158
35
55
(69)
YS-505-155
0
Ser.No.
I253440
0.3
YS-505 type
22http:// www.fdk.co.jp
Optical couplersYW-1000 series
Part No.
YW-1000
1x8
1.26-1.36/1.48-1.58 m
11.0dB max. (10.0dB)
0.8dB max. (0.4dB)
0.1dB max. (0.03dB)
55dB min. (60dB)
55dB min. (60dB)
SMF Length : 2m
( )Typical
Port
Wavelength
Insertion loss
Loss uniformity
Polarization dependent loss
Return loss
Directivity
Input/output fiber
ConditionsItems
Specifications
µλ
λ
λ
λ
λ
φ
λ
To,
To,
To,
To,
To,
0ch : 0.25mm1-8ch : Ribbon
Shapes and dimensions
Unit = mm
9.5
6
88.5
96.5
0ch
1-8ch
Operating temp. range To
Storage temp. range Ts
0 to 70
40 to 85
C
C
Optical couplers are used for variety in optical networks. YW-1000type is waveguide coupler which applies the ion exchangetechnology. It has attained excellent characteristics such as lowinsertion loss, low polarization dependent loss and good lossuniformity.
Low insertion loss
Low polarization dependent loss
Good loss uniformity
Low wavelength dependent loss
••••
Features
FDK Web Site
For improvement of its products, FDK reserves the right to change specificaitonswithout prior notice to customers.
Electronics sales div.5-36-11, Shinbashi, Minato-ku, Tokyo 105-8677, Japan(Hamagomu Bldg.)TEL : (81)-3-5473-4672 FAX : (81)-3-3431-9436
U.S.A FDK AMERICA, INC. CORPORATE OFFICE2270 North First Street, San Jose, California 95131-2022, U.S.A.TEL : (1)-408-432-8331 FAX : (1)-408-435-7478
FDK AMERICA, INC. BOSTON OFFICE411 Waverley Oaks Road, Suite 324, Waltham, Massachusetts,02452-8437, U.S.A.TEL : (1)-781-899-7700 FAX : (1)-781-899-7701
FDK AMERICA, INC. SAN DIEGO OFFICE 6540 Lusk Blvd. Suite C 274 San Diego, California, 92121-2766, U.S.A.TEL : (1)-858-558-8368 FAX : (1)-858-558-6005
Europe FDK ELECTRONICS GMBHHeerdter Lohweg 89,40549 Düsseldorf, GermanyTEL : (49)-211-591574 FAX : (49)-211-593549
FDK ELECTRONICS UK LIMITEDSuite 4C Celect House 12A Fairbairn Road, Kirkton North LivingstonEH54 6TS, Scotland, United KingdomTEL : (44)-1506-467981 FAX : (44)-1506-467982
Asia FDK HONG KONG LTD.Suite 1601-1602, Tower 3, China Hong Kong City, 33Canton Road, Tsim Sha Tsui, Kowloon, Hong KongTEL : (852)-27999773 FAX : (852)-27554635
FDK SINGAPORE PTE., LTD.4, Leng Kee Road, #06-07 / 08 SiS Building Singapore 159088,Republic of SingaporeTEL : (65)-472-2328 FAX : (65)-472-5761