Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Operating Instruction
RAYMOND MILLRAYMOND MILL
Henan Hongxing Heavy Machinery Co., Ltd.
The Handling Materials and Application of Raymond Mill:
The Main Structure of Raymond Mill:
Hongxing Raymond mill is widely used for
grinding non-flammable and non-explosive
materials whose Moh’s hardness is below 9.3
and humidity less than 6% such as barite,
calcite, potassium feldspar, talc, marble,
This machine is mainly composed of main
engine, analytical engine, air blower, clone
separator for final products, clone separator
for micro powders and air pipe, and the main
limestone, dolomite, fluorite and lime, activated
clay, activated carbon, bentonite, kaolin, cement,
phosphate rock, gypsum, glass and thermal
insulation material in mine, metallurgy,
chemistry and building industry.
engine is composed of rack, inlet air volute,
relieving tool, grinding roll, grinding ring and
cover piece.
Compared with ball mill, this equipment has high
grinding efficiency, low electricity consumption
and small coverage size and one-time
investment. The grinding roll tightly presses on
the grinding ring under centrifugal force; for this
reason, when the grinding roll and the grinding
ring are abraded, the output and the fineness of
the final products are not influenced. The
changing cycle of the grinding roll and the
grinding ring is long. The air separation flow of
this machine cyclically flows inside the air
blower, mill case, cyclone separator and air
blower, so that compared with high-speed
centrifugal crusher, this machine has little
powder dust and the operational workshop is
clean.
Features
1.Low investment cost, under the same
fineness condition, it has lower input than
air current mill, lower cost and shorter
recovery period.
2.Under the same fineness of finished
products and power, its output is higher by
45% than air current mill and stirred mill.
Advantages:
Characteristics:
Processing ability: 2-120 t/h
Feeding size: ≤15-≤30mm
Applied material: barite, calcite, feldspar,
talc, marble, limestone, dolomite, fluorite.
Working principle:
Technical data:
When Raymond mill works, the materials that
need to be crushed are fed into the machine
through the feeding hopper. The grinding roll
that hangs on the main engine will rotate
around the vertical axis and rotates around
itself. Due to the centrifugal force produced in
the rotating process, the grinding roll will
swings outward and tightly press onto the
grinding ring to make the relieving tool scoop
up the materials and send them to the space
between the grinding roll and the grinding ring,
and the materials will be crushed due to the
rolling and grinding of the grinding roll.
Parameter 6R4525 3R603R75 3R654R3216
Feeding size (mm)
Diameter of pulverizing roller
(mm)
Particle size of finished product
(mm)
Height of pulverizing roller
(mm)
Shift output of different
material fineness (t)
Main Motor
Diameter of pulverizing ring
(mm)
Fan Motor
Diameter of pulverizing roller
(mm)
Analyzer motor
≤30
450
0.125-0.044
250
16-120
Y315m-4-132
82
Y315m-4-132
1770
Y160m-4-18.5
≤25
410
≤25
320
0.125-0.044
160
4-45
Y225s-4-37
130
Y200L-4-37
1073
Yc120-4a-5.5
≤25
300
0.125-0.044
160
3-35
Y225m-8-30
160
Y180m-4-22
973
Y112m-6-2.2
≤15
140
≤20
270
≤20
260
≤15
210
0.125-0.044
100
0.125-0.044
150
0.125-0.044
150
0.125-0.044
150
0.5-8
Y160m-6-7.5
2-28
Y225m-8-22
1.5-20
Y225s-8-18.5
1-18
Y200L-8-15
280
Y132s-2-5.5
160
Y160L-4-15
160
Y160L-4-15
180
Y160m-4-11
495
Y90L-6-1.1
885
Y112m-6-2.2
865
Y112m-6-2.2
725
Y112m-6-2.2
0.125-0.044
190
8-60
Y280s-4-75
105
Y250m-4-75
1400
Yc200-4B-7.5
3R90 3R85
4R90 4R855R4119
Pre-sale services: enthusiasm
Sale services: servant
After-sale services: faithfulness
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
To establish long term friendship, we will regularly pay return visit to customers.Supplying technique, building design, instruction, installation