HERMLE # C-600U “5-AXIS” CNC VERTICAL MACHINING CENTER HAAS # VF-3 CNC VERTICAL MACHINING CENTER

ONLINE CNC MACHINERY, TOOLROOM, FORKLIFTS AND PLANT SUPPORT AUCTION

ONLINE ONLY AUCTIONCNC TURNING • CNC VERTICAL • CNC HORIZONTAL &

“5-Axis” CNC MACHINERY • TOOLROOM • FORKLIFTS • FABRICATINGSurplus Consigned from

Major Aerospace & Other Manufacturers(Various Locations: See Online Lot Catalog For Locations)

SALE DATE: TUESDAY, JUNE 21st 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

Tom DeCosmo, Jr. (413) 530-0019 tdecosmo@thomasauction.comSale under Management of:

Thomas Industries, Inc.2414 Boston Post Road, Guilford, CT 06437-2310

Phone (203) 458-0709 • Fax (203) 458-0727 email: gavel@thomasauction.com www.thomasauction.com

AMADA # ASTRO-FAB-III-8025 CNC Press Brake TAKAMAZ # “X-10 Hi-Server” CNC Lathe

1 of 2

New2005

LowHours

80 Ton x 98” Cap.

New2000

RareMachine

New2000

Trunnion Style Full

5-Axis

Aerospace

New2000

FanucControl

INSPECTIONS - CALL TOM DECOSMO, JR. - (413) 530-0019 / tdecosmo@thomasauction.com

ONLINE AUCTION – REGISTER & BID AT WWW.THOMASAUCTION.COM2

HERMLE # C-600U “5-AXIS” CNC VERTICAL MACHINING CENTER w/ “TRUNNIoN” STyLE “5-AXIS” RoTARy TABLE MATSUURA # MC-1000-VDC CNC “TwIN

SPINDLE” VMC

New 2005

New 1992

Aerospace

HAAS # VF-3 CNC VERTICAL MACHINING CENTER CINCINNATI # CINTI-MATIC HoRIzoNTAL MACHINING CENTER

TRAUB CNC VERTICAL MACHINING CENTER

KIA # KV-45 CNC VERTICAL MACHINING CENTER

KURAKI # KH-80 CNC “4-AXIS” HoRIzoNTAL MACHINING CENTER

EDGETEK “SUPER ABRASIVE 4-AXIS” CNC GRINDER

HITACHI # SEIKI-MATIC HoRIzoNTAL MACHINING CENTER

CINCINNATI # ARRow-1500 CNC “4-AXIS” VERTICAL MACHINING CENTER

1 of 2

New 2000

Aerospace

ANGLE PLATES NOT INCLUDED

GN FANUC Re-trofit

100”x 40” Cap.

New 1998

60”-X

Full4th Axis

Fanuc Control

GE Fanuc Control

New 1997

1 of 2

Low Hours

4-Axis New 2000

Fanuc Control

60”x 40” Cap.

LateRetrofit

VARIOUS LOCATIONS: SEE LOT CATALOG FOR LOCATIONS

LARGE SELECTION OF PLANT SUPPORT, TOOLING, INSPECTION EQUIPMENT & MUCH MORE!! 3

HYSTER #H-400-B DIESEL FoRkLIFT TRuCk w/ # 48,000 LB. CAP.

yAM 17”X 40” ENGINE LATHE

TooLMEX # FwD-32J “UNIVERSAL” HoRIzoNTAL-VERTICAL MILLER

RoFIN LASER MARkING SYSTEM AB LASER MARKING SySTEM

KIA CNC TURNING CENTERS

“MoTo-MAN” CNC RoBoTIC CELL w/ CoNTRoLS

KENT # KGS-250-AH “HYDRAuLIC” SuRFACE GRINDER

NoMURA DoUBLE END “SwISS TyPE” CARBIDE TooL GRINDER

koMATSu # FG-45T-6 w/ # 9,000 LB. CAP. KATo ENGINEERING 1000Kw PowER GENERAToR

ENCo TooLRooM LATHE

DRO

Several Available

See Lot Catalog for more Lasers

13”x 36” Cap. w/ DRO

Late Model

Late Model

VIEW of SEVERAL CNC LATHES RECENTLY REMOVED

FROM SERVICE

6”x 18” Cap.

LowHours

Detroit Diesel V-12

Engine

New 2008

ALL w/FANUC CONTROLS

SALE DATE: TUESDAY, JUNE 21st 1:00 PM (ET)

NOTE: ITEMS BEING ADDED DAILY - PLEASE KEEP CHECKING LOT CATALOG!4

BAUBLyS CoNTRoL LASER

LEBLoND 26” X 96” “REGAL SERVo SHIFT” ENGINE LATHE

HySTER # E70-XL ELECTRIC FoRkLIFT w/ # 8,000 LB. CAP.

FEDEk “wARRIoR” CoMPACT CNC BAR-FEED uNIT

SAEILo # SNV-3 CNC VERTICAL MILLING MACHINE

PANASoNIC # P-100 RoBoTIC wELDER w/ CoNTRoLS

RoBo-VENT DUST CoLLECToR

BALTIMoRE AIR CoIL 215 ToN CooLING TowER, MoDEL # BAC-

KEwANEE # H3S-200-Go GAS-oIL TyPE BoILER

Late Model

Late Model1 of 2

Recently Removed

from Service

Recently Removed

from Service

AMADA # ASTRo-FAB-III-8025 CNC

Press Brake

LowHours

80 Ton x 98” Cap.

New2000

ONLINE BIDDING ONLY - REGISTER AND BID AT WWW.THOMASAUCTION.COM

INSPECTION: BY APPOINTMENT ONLY

5

ONLINE AUCTIONSurplus Consigned from Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)

SALE DATE: TUE., JUNE 21st 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

Buyer’s Premium: 15%Payment Due In Full: wEDNESDAy, June 22nd, 2016

Removal: All items must be removed by Friday, July 1st, 2016

THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxwww.thomasauction.com

Under Management of:

TECHNICAL INFORMATION & INSPECTIONSTom DeCosmo, Jr. (413) 530-0019

or Email: tdecosmo@thomasauction.comPAYMENT INFORMATION

Irina Lekhmus (203) 458-0709 X108

AUCTION ITEM LOCATION INFORMATION AT WWW.THOMASAUCTION.COM

Staggered Closing Times: Lots Have 60-Second Staggered Closing Times.Auto Extend Bidding: If a bid is submitted with less than 3-minutes

remaining, the closing time for that lot will be extended by 3-minutes.Payment Types: Certified Check or wire TransferDisclaimer: Auctioneer is not responsible for errors, omissions, additions

or deletions. Items offered may not necessarily be sold as described and/or photographed. Buyers should verify all aspects of their poten-tial purchases during inspection as all items offered will be sold “as is, where is” with all faults. Please check with the auctioneer’s office for additions or deletions.

As-Is where-Is: All Items Are Sold “As-Is where-Is” with No warranty or Guarantee of operating Condition. Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding.

Removal Costs: Buyers are fully responsible for all cost to remove their purchases. Please get removal quotes prior to bidding and bid accordingly. All Riggers must be approved by Auctioneer and/or Consignors.

Legally Binding Contract: All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.

Registration: Register and bid at www.thomasauction.com

CLAUSING-KoNDIA CNC VERTICAL KNEE MILL

ESF-50 wALk-IN oVEN w/ DIGITAL CoNTRoLS

CoMET 2 HP VERTICAL MILLING MACHINE

SHARP #14-40F TooLRooM LATHE

KIA # KV-45 CNC VERTICAL MACHINING CENTER

TAKAMAz # “X-10 HI-SERVER” CNC LATHEKIA # KIT-30A CNC TURNING CENTER

Late Model

Late Model

New 2008

14”x 40” Cap. w/ DRO

FANUC Control

FANUC Control 1 of 5

ONLINE AUCTIONSurplus Consigned from Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)

AUCTION DATE: TUESDAY, JUNE 21st 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

AMADA CNC PRESS BRAKE • CNC MACHINING CENTERS • CNC LATHES • TOOLROOMSurplus Consigned from

Major Aerospa ce & Other Manufacturers(Various Locations: See Lot Catalog for Locations)

SALE DATE: TUESDAY, JUNE 21st 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

ONLINE CNC MACHINERY, TOOLROOM, FORKLIFTS & PLANT SUPPORT AUCTION

KIA CNC TURNING CENTER

PRESORTED FIRST CLASS MAIL

U.S. POSTAGE

PAIDPermit No. 80

Milford, CT

THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

FORWARDING SERVICE REqUESTED

AMADA-Time Saver # 1BT-620 Belt Sander/Grinder/Deburrer

MIYANO # TSV-23 CNC Drilling, Tapping & Milling Center

Fanuc Control

1 of 5New 1999

Fanuc Control

New 2000