Embed Size (px)
Citation preview
A Hilco Global CompanyVested in Your Success
31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995
www.hilcoind.com
Online Bidding Closes Tuesday, December 16
th thru Thursday, December 18
th
St. Catharines, Ontario, Canada
Late Model CNC Turning &Machining, CNC Gear
Machinery, Heat Treat, Robots,Tool Room, Fabricating, Lab &
Inspection Equipment
ONLINE AUCTION1ST SALE IN A SERIES OF AUCTIONS
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2
ONLINE AUCTIONHilcoTM Industrial
ONLINE BIDDINg CLOSES
TUESDAY THRU THURSDAY, DECEMBER 16
THTHRU 18
TH
CHeCk www.HIlCoInd.Com For ClosInG tImes
PREVIEw
THURSDAY & FRIDAY,DECEMBER 11
TH& 12
TH&
MONDAY THRU WEDNESDAY, DECEMBER 15
THTHRU 17
TH
8AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt ken plAnet At 248-238-7988, [email protected] or mArk reynolds At 205-595-5999, emAIl [email protected]
ASSET LOCATION282 / 285 ONTARIO ST ST. CATHARINES, ONTARIO, CANADA
DIRECTIONSFROM EITHER TORONTO PEARSON INTERNATIONAL AIRPORT (YYZ) OR BUFFALOINTERNATIONAL AIRPORT (BUF): TRAVEL TO THE QEW AND TAKE EXIT FOR ONTARIOSTREET (EXIT 47). TURN SOUTH (RIGHT) ONTO ONTARIO STREET AND TRAVEL APPROX. 1MILE TO PLANT ENTRANCE AND PARKING LOT ON EAST SIDE OF ONTARIO ST.
FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S
PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OFCASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN-TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BECONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.
• REMOVAL DEADLINE IS FRIDAY, JANUARY 15TH WITH HOURS OF REMOVAL BETWEEN 8AMTO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINEARE SUBJECT TO FINES OF $500 PER DAY.
MACHINERY & EQUIPMENT
KEN PLANET 248-238-7988 • [email protected] REYNOLDS 205-595-5999 • [email protected] INFORMATION
LESIA JOSEPH 616-328-6892 • [email protected] ACCOUNTS RECEIVABLE AT [email protected] SERVICE
+1 877-37-HILCO • +1 616-732-1800 • [email protected] NEELY AT 248-254-9999 X16 • [email protected]
Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to
date, sale process, terms and conditions and list of available assets.
(7) CNC GEAR HOBBERS
Late Model CNC Turning
& Machining, CNC GearMachinery, Heat Treat,
Robots, Tool Room,Fabricating, Lab & Inspection Equipment
Including:
• High Speed Ajax Forging Presses• Round Die Cross Rolling Machines• Minster Knuckle Joint Presses• Shot Blast Equipment• Induction Heating• Bar Shear Lines• Motor Rebuild Shop• Valve Rebuild Shop• Complete Power House• P&E Bolt Makers
AVAILABLE IMMEDIATELYMake Offers at
www.hilcoind.com
Private treaty SaLeComplete Forging
Operationwith Press Capacity to 4,000 ton
& Hydraulic valve repair Operation
For more information, please visit us on the web at www.hilcoind.com 3
CNC GEAR SHAVERS • CNC GEAR SHAVER CUTTERS (10) GEAR SHAPERS (5) GEAR GENERATORS
(7) CNC GEAR HOBBERS2 – PFAUTER P100 5-AXIS CNC GEAR HOBBERS, S/Ns 28192, 28193
(Both 1996), Fanuc CNC Control, Chip Conveyor
2 – PFAUTER PE100 5-AXIS CNC GEAR HOBBERS, S/Ns 28194, 28195(Both 1996), Fanuc 15-M CNC Control, Chip Conveyor
3 – PFAUTER PE80 5-AXIS CNC GEAR HOBBERS, S/Ns 28009, 28011& 28111 (All 1994), GE Fanuc Series 15M CNC Control, Chip Conveyor
CNC GEAR SHAvERS4 – HURTH ZS240TCNC 3-AXIS CNC GEAR SHAVERS, S/Ns 44509,
44510, 44567 & 44570 (1994 & 1996), GE Fanuc 16-M CNC Controls
CNC GEAR SHAvER CUTTERS2 – HURTH SRS402 SHAVE CUTTER GRINDERS, S/Ns 21788 & 21831,
CNC Retrofit GE Fanuc 16-M CNC Controls, GT Electric Balance System
(10) GEAR SHApERS10 – FELLOWS #10-2 GEAR SHAPERS, SPM 33-1300, RPM “D” Shaft 5-800,
Feed Per Stroke .001” – .040”, Allen Bradley Drive, Cutler HammerPanelmate Pro Monitor, Many Rebuilt by DEMM / Fellows Licensee
(5) GEAR GENERATORS5 – GLEASON MODEL 725 STRAIGHT BEVEL REVACYCLE GEAR
GENERATORS Root Angle Range 15° – 55°, Pitch Diameter 6" Manual,Pitch Diameter – Automatic Gear/Pinion Hopper 4"
GEAR ANALYZERS/TESTERS • (23) CNC HORIZONTAL TURNING CENTERS
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4
2004
2004
GEAR ANALyzERS/TESTERS2 – M&M PRECISION SYSTEMS SERIES 3000 GEAR ANALYZERS, Model 3012
4 12 12 S/N 5757, Model 3015 4 12 12 S/N 5784
2 – GLEASON NO. 6 ANGULAR HYPOID GEAR TESTERS
(23) CNC HORIzONTAL TURNING CENTERS8 – FUJI MODEL FS4-3IG1 2-AXIS CNC TURNING CENTERS, (All 2004), Fanuc
21i-TB CNC Control, Spindle Speeds 750-4000 RPM & 580-2710 RPM, Two Position Tool Holder, Fuji Lathe Gauge with Marposs M5& E3 Measuring Gauge, Robot Loader Arm, Fuji type ALSF4 Chip Conveyor
2 – MORI SEIKI ZL25B-1000 4-AXIS CNC TURNING CENTERS, S/Ns ZL25907,ZL25906, Swing 13.78”, Centers Distance 40”, 10-Position & 8-PositionTurrets, Tailstock, GE Fanuc Series 16-T CNC Control
4 – TAKAMATSU MODEL X200 DUAL SPINDLE CNC LATHES, S/Ns 10200341020038, 1020035, 1020039 (All 2004), Max Bar Diameter 51 mm (2"), Travels:X - 240 mm (9.45"), Z - 550 mm (21.65"), Fanuc 18i-TB CNC Control, 12 PositionTurret, Pendant Control, Max RPM 2,000, Load Station, Gauge Station, BufferConveyor
3 – HARDINGE CONQUEST T51 2-AXIS CNC TURNING CENTERS, GE Fanuc18-T CNC Control, Bar Capacity 2”, Swing 26”, Tailstock, 12-Position Turret,Part Catcher, Spindle RPM 4200, Chip Conveyor
3 – HARDINGE CONQUEST T51 2-AXIS CNC TURNING CENTERS, GE Fanuc18-T CNC Control, Bar Capacity 2”, Swing 26”, Tailstock, 12-Position Turret,Part Catcher, Spindle RPM 4200, Chip Conveyor, Robotic PartsLoad/Unloader
3 – TOYODA GT44 2-AXIS CNC TURNING CENTERS, S/Ns 44021, 44023 & 44024,GE Fanuc 15M CNC Control, 12-Position Turret, Tailstock, Chip Conveyor
CNC VERTICAL TURNING CENTERS • CNC HORIZONTAL MACHINING CENTERSCNC VERTICAL MACHINING CENTERS • SPLINE ROLLERS
For more information, please visit us on the web at www.hilcoind.com 5
2013
SpLINE ROLLERS1 – ANDERSON COOK MODEL 340 SPLINE ROLLER, S/N 298, Capacity 36”, 25 HP
Motor & Hydraulic Power Unit, Overarm Support
1 – ANDERSON COOK MODEL 350-S SPLINE ROLLER, S/N 269, Capacity 48”, Motor& Hydraulic Power Unit, Overarm Support
HyDRAULIC STRAIGHTENING pRESS1 – HESS MAE HY-SO10-RH HYDRAULIC STRAIGHTENING PRESS, S/N 788, Gap
Frame Press
GUN DRILLS3 – NAGEL MODEL 3HS6-30 THREE SPINDLE GUN DRILLS, Allen Bradley Panelview
Terminal
BROACHING MACHINES3 – US BROACH & MACHINE MODEL 25T X 54 – 25 TON X 54" STROKE VERTICAL
PULL-DOWN BROACHING MACHINES, S/Ns M21746 / M91748, M91668 &M91865 (All 1982), 60 HP Motor & Hydraulic Pump
3 – US BROACH & MACHINE MODEL 10T X 42" VPD 10 TON X 42" STROKE VERTICAL PULL-DOWN BROACHING MACHINES, S/Ns M-91767, M-91766 & M-91869, 20 HP Motor & Oilgear Pump
1 – DETROIT BROACH MODEL 15 X 42 VPU 15 TON X 42" STROKE VERTICAL PULLUP BROACH, S/N M106520, Motor & Oilgear Pump
1 – DETROIT BROACH MODEL 10 X 42 VPD 10 TON X 42" STROKE VERTICAL PULLDOWN BROACHING MACHINE, S/N M-805039
1 – GENERAL BROACH MODEL GBPU 10X42 10 TON X 42" STROKE BROACHINGMACHINE, S/N MA-91479-A, Two (2) 15 HP Motors & Pumps, Die Master Broach
register and Bid
Online Only at
www.hilcoind.com
CNC vERTICAL TURNING CENTERS4 – HARDINGE CONQUEST VT200 2-AXIS CNC VERTICAL TURNING
CENTERS, Fanuc CNC Control, Max Turning Diameter 15.75”,Travels: X – 7.94”, Z – 19.88”, 12-Position Turret, 15/18.5 KWFanuc Drive, Chip Conveyor
CNC HORIzONTAL MACHINING CENTERS3 – ENSHU J40H 4-AXIS CNC HORIZONTAL MACHINING
CENTERS (1997), GE Fanuc 18-M CNC Control, 24 Position ATC
2 – CINCINNATI MAXIM 500 4-AXIS CNC HORIZONTAL MACHINING CENTERS, S/N 3631B0194-0012 & -0013 (Both1994), GE Fanuc 16-M CNC Control, Pallet Size 19.8” x 19.8”,Travels: X – 29.5”, Y – 27.6”, Z – 29.5”, 40 Position ATC – 50Taper, Chip Conveyor
CNC vERTICAL MACHINING CENTERS3 – CHIRON FZ 12W MAGNUM VERTICAL MACHINING
CENTERS, S/Ns 485-64, 485-65 & 487-34, GE Fanuc 16M CNCControl, Travels: X – 550 mm, Y – 300 mm, Z – 425 mm, 20Position Tool Changer
CNC HORIzONTAL TWIN SpINDLE LATHES3 – FUJI MODEL CSD 400 300MM X 150MM FULLY AUTOMATED
HORIZONTAL TWIN SPINDLE CNC LATHES, S/Ns SE0097050,SE0095414, SE0095413 (All 2013), Dual Spindles, Fewer than2100 Hours on Each Machine, Fanuc Oi-TD Control, Max. SpindleSpeed 2220 RPM, Spindle Motors 15 H.P., Marpos P7meElectronic Measuring System, Gantry Robot, 10-Pallet WorkStocker, Located Offsite – For More Information and InspectionContact Ed Cervac 847-849-2935, Email [email protected]
(10) SCREW MACHINES • FINISHING • INDUCTION HEATING LAB & INSPECTION • SERVO ROBOTS • PRODUCTION MACHINERY
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6
2003
2004
(10) SCREW MACHINES /
ROTARy TRANSFER MACHINES8 – ACME GRIDLEY MODEL RB8 2 5/8 8-SPINDLE
AUTOMATIC SCREW MACHINES, Bar Racks,Assorted Tooling
2 – HYDROMAT 6-SPINDLE ROTARY TRANSFERMACHINES, Bar Feed, Hydromat Drag Conveyor
FINISHING EqUIpMENT3 – IMPCO INC. 2-STATION BURNISHING MACHINES,
S/Ns BM-179-1614, BM-180-1695, N/A
3 – AGNEW TWO STATION HORIZONTAL MILLINGMACHINES, S/Ns 6338, N/A, Machine "B", Motor &Hydraulic Power Unit, Transfer Conveyor/Loader
INDUCTION HEATING1 – AJAX TOCCO DUAL STATION INDUCTION
HARDEN & TEMPER LINE (2004), Including AjaxTocco Hardener Inductotron II 300 KW / 10 Khz Supply,S/N 23-1045A, Harden & Temper Roller Clutch RaceInduction, Tocco AC High Efficiency Power Supply,Capacity 27.19 KW, Inducton II Microprocessor ControlCutler Hammer Panelmate Power Pro Terminal,Common IGB Eddy Current Checker/Crack Test Unit(2003), S/N 101, Hameg 35 MHz Oscilloscope, AllenBradley Power Flex 4 Terminal
1 – MICRO PULSE CONTOUR HARDENING INC. HARDENLINE, Dual Spindle Automated Line, Pillar IndustriesModel RF450P 450 KW RF Power Supply, S/N 35349,KW 300/450, Freq. 450 KHZ, Automatic Unload & LoadArms, Quench Tank, Allen Bradley Panelview Terminal
2 – TOCCO MODEL OL-204 INDUCTION HARDENERS,S/Ns T4-4903-21A & 21B
3 – TOCCO MODEL OL-204 / D87625 INDUCTION HARDENERS, S/Ns T4-4903-21C & 41-D / T4-4903-41C
LAB & INSpECTION3 – LECO VARI/POL VP-50 DUAL POLISHERS
1 – LECO CS-300 COMBUSTION ANALYZER
1 – LECO 250 SECTIONING MACHINE
1 – LECO 300 METALLOGRAPH
1 – ROCKWELL 3JR HARDNESS TESTER, S/N 9325
QUANTITY OF LAB & INSPECTION EQUIPMENT,Including: ARL 3460E AES Spectrometers, Lindberg SolaBasic Oven, J&L Model FC-14 & Starrett Sigma ModelHB400 Optical Comparators
SERvO ROBOTS4 – FANUC MODEL M16iB GANTRY RAIL MOUNTED
SERVO ROBOTS, S/Ns F-60273, F-60274, F-60275,F-60276 (All 2003), Controller R-J3iB, Teach Pendant,Gantry Rails 65’ & 80’ Length
3 – ABB MODEL IRB 2400 F/16 6-AXIS SERVOROBOTS, S/Ns 24-14861, 24-14860, 24-14859 (All2000), Reach 1.55 m, Payload Capacity 20 kg,Controller, Teach Pendant
pRODUCTION MACHINERy3 – KASPER MODEL 4201 S.O. 5344 TWO SPINDLE &
THREE SPINDLE VERTICAL LATHES
3 – WERTH ENGINEERING 55H-3-AL 3-SPINDLE PRODUCTION TURNING LATHES, Werth #A1
1 – WERTH ENGINEERING 5-15-HNC 3-SPINDLE CNCPRODUCTION TURNING LATHE, W.O. 4551-0284(2002) (Rebuilt), GE Fanuc Series 18i-T CNC Control,Werth #F1, Rebuilt by Merritech Werth
FABRICATING • TOOL ROOM EQUIPMENT • WASHERS ROLLING STOCK • PLANT SUPPORT
For more information, please visit us on the web at www.hilcoind.com 7
FABRICATING EqUIpMENT1 – ACCURPRESS 7608 HYDRAULIC PRESS BRAKE, Capacity 60 Ton, Overall Bed & Ram 8’
1 – ALLSTEEL PIRANHA MODEL 70-8 PRESS BRAKE, S/N 272, Capacity 70 Ton, Overall Bed &Ram 10’ (with Horn Extension), Between Housings 6’ 6”, Manual Back Gauge
1 – ROPER WHITNEY MODEL 812 APRON BENDING BRAKE, S/N 431 8 71, Capacity 8’ x 12 Gauge
1 – ACCURSHEAR MODEL 850010 HYDRAULIC SQUARING SHEAR, S/N 2223 (1996), Capacity16 Gauge – 1/2”, (3) Front Stock Supports, Ball Feed Table, Front Operated Power Back Gauge
1 – LUNA MODEL 8266 12/60 INITIAL PINCH PLATE BENDING ROLL, S/N 2916, Capacity 1290mm (50.79”) x 6.0 mm (.236”), Roll Diameter Approx. 5.5”
1 – BROWN & BOGGS INITIAL PINCH PLATE BENDING ROLL, S/N S4549, Capacity 48”, RollDiameter Approx. 4”
1 – BOMAR ECONOMIC MODEL 510-320 GHV HORIZONTAL BANDSAW, Capacity 17” x 13”
1 – MARVEL MODEL 15A HORIZONTAL BANDSAW, S/N F-151869-W
WASHERS1 – RANSOHOFF 24" X 20' BELT TYPE WASHER, Two (2) 3 HP Motor/Pumps
1 – VENTURE MODEL FMA-30-1500 DUAL LANE BELT TYPE WASHER, S/N 1849, 4" Dual LaneWide x 12' Long, Capacity 250 GPM, Parking Gear Washer
1 – RANSOHOFF WASHER, S/N H1478, 5 HP Motor & Pump
2 – RANSOHOFF 12" WIDE X 12' LONG BELT TYPE WASHERS, S/N H-1310 & H-1309, Wash & Blow Off
1 – CK INDUSTRIAL CONCEPTS 18” WIDE X 8’ BELT TYPE WASHER (1995), HR Black Filter
ROLLING STOCk1 – TENNANT 8410 RIDING TYPE FLOOR SWEEPER/SCRUBBER, S/N 12495, Hopper Raise/Lower
1 – CROWN MODEL 60P-S ELECTRIC WALKIE PALLET TRUCK, S/N H11482-2
1 – CWF MODEL PLW-40 4,000 LB CAPACITY ELECTRIC PALLET JACK, S/N 11224
QUANTITY OF MATERIAL HANDLING EQUIPMENT, Including: Tennant Model AS5300T WalkBehind Floor Scrubbers, Hyster Model W60Z 6,000 Lb. Capacity Electric Walkie Pallet Trucks, YaleElectric Type Stackers, Forks 42"
pLANT SUppORTQUANTITY OF PLANT SUPPORT EQUIPMENT, Including: Welders, Welding Tables, FumeCollectors, Alfa Laval Centrifuges, Westfalia Separators, Wood Top Work Benches & Cabinets, ArborPresses, Pedestal Grinders, Drill Presses, Chop Saws, Platform Scales, Lista, Vidmar & Nu-EraStorage Cabinets, Milling Machine Vises, Rotary Tables, Etc.
TOOL ROOM EqUIpMENT4 – CINCINNATI MODEL 330-15 CENTERLESS GRINDERS, Profile
Truing, Compensation
1 – TOS KURIM MODEL FGS 50/63 RAM TYPE SPINDLE HEADSTOCK KNEE TYPE MILLING MACHINE, S/N 19043, Table25" x 71", Heidenhain 3-Axis DRO, Pendant with A & B Axis Control,50 Taper Spindle
1 – SAJO MODEL UF-54 UNIVERSAL HORIZONTAL MILLINGMACHINE, Machine #63655, Table 13" x 54", Spindle Speeds 39-1500, Head Type URF54
1 – SAJO MODEL UF-54 UNIVERSAL HORIZONTAL MILLINGMACHINE, Machine #64809, Table 13" x 54", Spindle Speeds 79-1500, Acu-Rite DRO
1 – LAGUN MODEL FTV-2 VERTICAL MILLING MACHINE, Table 9" x 48", 3 HP, Acu-Rite Master MP DRO1 – Morris Radial Arm Drill,Box Table, 5 HP Motor
1 – CUTTERMASTER MODEL HDT-30 END MILL TOOL GRINDER,S/N 2379B (1987), End Mill Capacity 2" Shank, 9" OD, 10" Length,Swing Over Table 9-1/2", Longitudinal Table Travel (X) 6", CrossTravel Wheel Table (Y) 3", Tilt Adjustment Wheelhead +35°/ -10°
1 – DOALL MODEL V-26 26" VERTICAL BAND SAW, S/N 26532839,Tilt Table 30" x 30"
1 – COLCHESTER TYPE 17 ENGINE LATHE, Machine #17881070259,Swing 16" x Centers 84", Cross Slide, Steady Rest, 3-Jaw Chuck x 12-1/4" Diameter, Hole Through Spindle 3-1/8", Inch/Metric Threading
1 – DEAN SMITH & GRACE TYPE 18 HD 18" X 48" ENGINE LATHE,Machine #29860, Swing 18" x Centers 48", Cross Slide, Tail Stock,4-Jaw Chuck x 18" Diameter, Hole Through Spindle 3.5"
1 – DEAN SMITH & GRACE TYPE 17 ENGINE LATHE, Machine#35149-II-63, Swing 17" x Centers 48", Cross Slide, Tail Stock, 3-Jaw Chuck x 12" Diameter, Hole Through Spindle 2.75", 10 HP Motor
1 – COLCHESTER MODEL MASTER 2500 ENGINE LATHE, S/N 5/0001 11845, Swing 12", Centers 30", Cross Slide, Tail Stock,Hole Through Spindle 1-7/8", Spindle Speeds 30-2500, Inch/MetricThreading
1 – HARDINGE TOOLROOM LATHE, Cross Slide, Centers Approx. 18"
1 – NORTON 8" X 24" SURFACE GRINDER
1 – HEALD MODEL 273A ID GRINDER, S/N 41646, Red Head Spindle,0-500 Work RPM
1 – TACCHELLA #6ALP UNIVERSAL TOOL & CUTTER GRINDER,S/N 1287, Cross Travel 8", Wheel Head Vertical Travel 10", Chuck
1 – WSG SURFACE GRINDER, Table 8" x 26", 3 HP Motor
1 – DAKE MODEL 5-186 150 TON H-FRAME SHOP PRESS, S/N 152717, Bed 20" Front-Back, Between Housings 48"
Forwarding Service Requested
PresortedFirst Class MailU.S. Postage
PAIDDetroit, Mich.
Permit No. 2655
HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved
Printed in USA • GEN3234 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.
FollowUs on:
A Hilco Global Company
Vested in Your Success
31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995
www.hilcoind.com
OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA
HilcoTM Industrial ONLINE AUCTIONTerms of Sale
An 18% buyer's premium will be charged on all assets.The buyer’s premium will be reduced to 16% for paymentsmade by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48hours of sale close. Everything will be sold online to thehighest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted online. All items will be sold “as is, where-is” without any warranties, expressed or implied. Althoughobtained from sources deemed reliable, the Auctioneermakes no warranty or guarantee to the accuracy of theinformation herein contained. Bidders are encouraged tothoroughly inspect the items on which they intend to bidprior to sale. Absolutely no items will be removed until theday after the conclusion of the sale and payment is madein full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website atwww.hilcoind.com for any date, sale process, terms andconditions and list of available assets.
Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made toHilco Industrial, LLC. Payment Options: VISA, MastercardDiscover accepted – if invoice total is $2,000 or less, WireTransfer, Certified Check, or Company Check (with Bank let-ter of guarantee – see sample letter below). All sales are sub-ject to sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of their enti-tlement to claim such exemptions. Please see complete termsand conditions on our website, www.hilcoind.com.
Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auctionof a Major North American Automotive Manufacturer onDecember 16-18, 2014.
Online Bidding Closes Tuesday, December 16
th thru Thursday, December 18
th
St. Catharines, Ontario, Canada
Late Model CNC Turning &Machining, CNC GearMachinery, Heat Treat,
Robots, Tool Room,Fabricating, Lab & Inspection Equipment
1ST SALE IN A SERIES OF AUCTIONS
