A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

ONLINE AUCTIONDue to the closure of the former GE Solar (Primestar) Facilities in Aurora & Arvada, CO

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

ONLINE AUCTIONHilcoTM IndustrialDue to the closure of the former GE Solar (Primestar) Facilities

in Aurora & Arvada, CO

ONLINE BIDDINg OPENS

THURSDAY, MAY 8TH

BEGINNING AT 10AM LOCAL TIME

ONLINE BIDDINg CLOSES

THURSDAY, MAY 15TH

CHeCk www.HIlCoInd.Com For ClosInG tImes

PREVIEwMONDAY & TUESDAY, MAY 12TH - 13TH

9AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt JeFF GoddArd 206-300-1899,JGoddArd@HIlCoGloBAl.Com or BrIAn lee At 203-258-0927, emAIl Blee@HIlCoGloBAl.Com

ASSET LOCATIONS• 14401 WEST 65TH WAY UNIT B

ARVADA, CO 80004

• 19503 E. 34TH DRIVE AURORA, CO 80011

DIRECTIONSTO ARVADA, CO LOCATIONFROM DENVER INTERNATIONAL AIRPORT: EXIT AIRPORT VIA PEÑA BLVD AND MERGEONTO I-70 W. TAKE EXIT 266 FOR WARD RD AND TURN RIGHT. TURN LEFT ONTO W 64THAVE. FOLLOW TO GARDENIA ST AND TURN RIGHT, THEN TURN RIGHT ONTO W 65TH WAY.DESTINATION WILL BE ON THE LEFT.

TO AURORA, CO LOCATIONFROM DENVER INTERNATIONAL AIRPORT: EXIT AIRPORT VIA PEÑA BLVD, EXIT AT E 40THAVE AND TURN LEFT, CONTINUE TO TOWER RD AND TURN RIGHT. FOLLOW TO E 34TH DRAND TURN LEFT. DESTINATION WILL BE ON THE LEFT.

FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S

PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OFCASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN-TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BECONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS FRIDAY, JUNE 6TH WITH HOURS OF REMOVAL BETWEEN 8AM TO4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARESUBJECT TO FINES OF $500 PER DAY.

• SPECIAL REGISTRATION TERMS APPLY FOR THIS SALE, PLEASE SEE OUR WEBSITE FOR DETAILS.

• **PLEASE NOTE: CERTAIN ITEMS MAY ONLY BE PURCHASED BY INDUSTRIAL BUYERS.

MACHINERY &  EQUIPMENT

JEFF GODDARD 206-300-1899 • JGODDARD@HILCOGLOBAL.COMBRIAN LEE 203-258-0927 • BLEE@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT HIN_AR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COMSANDI NEELY AT 248-254-9999 X16 • SNEELY@HILCOGLOBAL.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

2011

For more information, please visit us on the web at www.hilcoind.com 3

LAMINATORS • LASER PROCESSING SYSTEMS • COATER

2009

2012

4 Available

LAMINATORS 2 – BÜRKLE YPSATOR 1232-5S LAMINATORS, (2011),

Unused, with 11 Cycles per Minute. This high capacitystacked laminator is a custom configuration of astandard Bürkle product. The laminator has 5 openings, or levels and can accommodate anyproduct that fits within the 1200x3200mm bed.Heating of the unit is accomplished through the circulation of heated oil through a platen resulting invery uniform temperature distribution during heatingand lamination. The unit consist of three processsteps: 1) Heated press with vacuum for air evacuation2) Heated press without vacuum and 3) cooling press.Process Flow is: (1) Load Conveyor to (2) Load Bufferto (3) Hot Press 1 to (4) Hot Press 2 to (5) Cold Pressto (6) Unload Buffer

4 – NPC LM-SA-170 X 400-S LAMINATORS, S/Ns16004930-04, 16004930-05, 16004930, N/A, (2009),with Load Conveyor, Unload Conveyor, and anEdwards GV600 Drystar Vacuum Pump System withMechanical Booster. System is 200V, 15KW, 3 Phase,60 Hz, and Includes a Power Cabinet, and ControlUnit with a Siemens Simatic Touch Screen Controller

LASER PROCESSING SYSTEMS4 – INNOLAS SYSTEMS GMBH IMPALA TTG THIN

FILM LASER PROCESSING SYSTEMS, (2012), forLaser Processing of Thin-Film Solar Cells, Unused,with Granite Pedestal As Base of Machine. 77Panel/Hr Process Rate. (4) P2 & P3 Laser SystemsIncludes (4) Datenbatt Model 532-20-V-OEM1Lasers, Wavelength 532nm Po 40 Watt, with PowerSupply P/N# COM2210. All Systems Include: Y1-AxisLinear Axis with Linear Scale for Moving the LaserProcess Assembly Along the Scribe, Y2-Axis Linearaxis with Linear Scale for Moving the ExtractionAssembly Along the Scribe, X1 – X2 Axes Linear Axiswith Linear Scale for Clamping the Product andMoving the Gantry Across the Scribe Direction, U1 -U4-Axes Linear Axis with Linear Scale to Adjustthe Scribe Distances, W1 – W4 Axes Linear Axis forCamera Focus Adjust with Stepper Motor Drive, Z1 – Z4 Axes Linear Axis to Adjust Process HeadFocus, A-Axis, Stepper Motor with Drive to LiftSubstrate up/down, B-Axis, Stepper Motor with DriveTransport Axis to Feed Substrate forward/back **

COATER1 – BÜRKLE RCLM1300 ROLL COAT RESIST

DEPOSITION SYSTEM, (2011), RCLM Roll Coat,TRDUE Dryer, UV Exposure, with Process Rate 1-6m/min, and Process Width 1300mm. The resistdeposition system is a standard equipment designfrom Bürkle for the roll coat deposition, drying and UVexposure of photosensitive resist materials. Thecoater is of explosion proof construction and compati-ble with the deposition of solvent based materials. Thedrying unit is capable of a maximum temperature of130C and has a 2m heated length. The exposure sys-tem includes two 60W/cm lamps at 365nm wavelength

**Items may only be purchased by industrial buyers

ETCHERS • GLASS WASHING SYSTEMS

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

2011

2011

GLASS WASHING SYSTEMS 1 – BILLCO 410-54SP GLASS WASHER, (2011), Unused, Flat Glass Washing

and Drying Machine, 410 Series, Specialized to 54" Width, with TouchscreenPLC Controller, 480V, 3 Phase, 60 Hz, 175A, 30HP, 1-6mm ThicknessCapability, with Feed Rate 20-65ft/min. Process: (1) Pre-Rinse to (2) 1st & 2ndBrush Clean to (3) Primary Rinse to (4) Secondary Rinse to (5) Final Rinse to(6)Dry

ETCHERS1 – SINGULUS STANGL SOLAR VITRUM 1400 NPR DEVELOPER INLINE

GLASS ETCHING MACHINE, (2011), Unused, with Product Size 1200mm Lx 1000mm W x 1.3mm Thick, Etching Parameters: 20-40C, 1%K2CO3,55mm/sec speed and 24 Second Cycle Time. Process Rate is 3.3m/min.Process Flow is: (1) Input Powered Rollers to (2) Chembath K2C03 to (3)Rinsing Section to (4) Fresh Water Spray to (5) Drying Unit with Feed Out. ToolIncludes Self Contained Chemical Delivery Monitoring and Control System toMaintain pH Level of Etching Solution

1 – SINGULUS STANGL SOLAR VITRUM ETCH DAE ETCHER SYSTEM, S/N P-000108.11.05, with Process Flow: (1) Feed In Module to (2) PrewettingModule to (3) Chemical Spray Bath to (4) Fine Rinse to (5) Ultra Fine Rinse to(6) Fresh Water Spray to Finally (7) Dry Unit**

**Item may only be purchased by industrial buyers

TAPING LINE SYSTEM • OVENS • PRINTERS • ROBOTS

For more information, please visit us on the web at www.hilcoind.com 5

2009

2012

2008

2012

2011

PRINTERS1 – THIEME 1030 SCREEN PRINTER, S/N 130080607123928, (2008),

with Digital Display Controller, 480V, 60 Hz**

1 – WEBER 5300 PRINTER LABEL APPLICATOR, with Digital ProfaceController, and 4'L Conveyance. Lot Includes 14'L Manual RollConveyance

ROBOTS4 – YASKAWA MOTOMAN ROBOTICS ES165D 6-AXIS ROBOTS,

(2011), Unused, In Original Boxes, with DX100 Controller System.Robot has 165kg Capacity, 3,372mm Vertical Reach, and 2,651mmHorizontal Reach

TAPING LINE SYSTEM1 – NPC PANEL TAPING LINE SYSTEM, (2009), with (8) Process

Modules in the Following Sequence: (1) Insulating Tape Station, (2)Foil Ribbon Station, (3 & 4) Busing Stations, (5, 6 & 7) Edge Seal TapeStations, and (8) Panel Sheeting Station. Each Module IncludesProface Digital Touch Screen Controller, and has Approximate 40'L ofConveyance. The Taping lay-up line, is a line of equipment's that per-form pasting of tapes, layering of EVA sheet and glass, lamination, andtransport to the trimming line, in each process. The line is divided intofive types of process. Each process is controlled by touch screen

1 – MANUAL TAPING STATION, with Dimensions 12'L x 6'W

OVENS2 – SMIT CdCL ACTIVATION OVENS, S/Ns F1233, F1234, (2012),

Unused, with 17 Thermal Zones Ranging from 1500-3000mm and4500mm, with Electrical Tubular Heating and 286kW Total HeatingPower, Soaking Temperature 375-430C, Glass Type: Float GlassTCO, CdS & CdTe Coated, Product Size 1200mm x 1000mm x1.3mm Thick. Process Rate is 700-2000mm/min

2 – SMIT BACK CONTACT ANNEAL OVENS, (2012), Unused, with 9Thermal Zones Ranging from 1500-3000mm, with Electrical TubularHeating and 88kW Total Heating Power, Soaking Temperature 130-170C with 8 Minute Soak Time, Glass Type: Float Glass TCO, CdS& CdTe Coated, Product Size 1200mm x 1000mm x 1.3mm Thick.Oven is 3 x 480VAC, 60 Hz, 90kW, and 160A. Process Rate is 700-2000mm/min

1 – BTU DR542-6-408A96 THIN FILM DRYING OVEN, S/N PSAC-3,(2009), Transheat Fast Fire II Series, 480V, 3 Phase, 50/60Hz, 200A,400C Max Temperature**

1 – SMIT CdCLl2 PRE-HEAT OVEN, S/N F1239, (2012), 480V, 60 Hz,3phase, 90kVA, with Product Size 1200 x 600mm or 1200 x1000mm, and 1.3mm Thick. 500C Temperature, with Glass Type:Borosilicate, Annealed or Tempered**

Bid Online Only at

www.hilcoind.com

**Items may only be purchased by industrial buyers

TEST, MEASUREMENT, INSPECTION AND LAB EQUIPMENT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

2010

2009

2009

TEST, MEASUREMENT, INSPECTION AND

LAB EQUIPMENT1 – SABER ENGINEERING SLS 2000 LASER SCRIBER SYSTEM,

Unused, Laboratory Laser Scribe System Intended for DevelopmentUse, System Includes an X,Y Servo System, Flat Table, Debris RemovalSystem and Associated Controls. The Laser and Optics are NotIncluded with System

1 – VEECO CONTOUR GT OPTICAL PROFILOMETER SYSTEM, S/NGTK1-10-116, (2010), 110W Max, DC Input 5-24V, with an X, Y, ZMotorized Translation Stage that Includes Joystick Controller and DellPrecision T3500 Computer Controller with Dell 21" LCD Monitor. SystemIncludes a TMC Vibration Isolation Table, and (3) Objectives: IX5, Nikon50X and Nikon 20X

1 – ZEISS AX10 / IMAGER M1M COMPOUND MICROSCOPE, S/N351800942, Imager M1M Series, SNT 12V 100W Light Source, X,Y,ZOptical Translation Stage, Zeiss AxioCam HRc Video System with DisplayScreen, EC Epiplan 5x, 10X, 20X, 50X & 100X Magnification Objective,Dell OptiPlex 330 Computer, Edmund MI-150 High Intensity Illuminator

1 – SENTECH SE850-E ELLIPSOMETER W/ FTIR SPECTROMETER, S/N12/072, (2012), Sentech SE850 Power Supply, Allied Vision TechnologiesOptical Camera, Sentech 600-09.24:18 Controller, APC Smart UPS 1500Power Supply, HP Compaq Computer, Ellipsometer with Agilent Cary 640FTIR Spectrometer, Newport Vibration Isolation Table

7 – THERMOTRON SE-2000-10-10 ENVIRONMENTAL CHAMBERS,(2011), Unused

2 – JENOPTIK VOTAM SOLAS LASER EDGE DELETE SYSTEMS, (As New As 2012)

1 – SUNX LP-V-LTFC-C LASER MARKER3 – SPIRE SIM 3500 SLP SOLAR SIMULATORS, (2009)**1 – METTLER TOLEDO T70 AUTO TITRATOR SYSTEM**1 – PV MEASUREMENTS INC. QEX7 SOLAR CELL SPECTRAL

RESPONSE MEASUREMENT SYSTEM, (2007)**1 – INLINE VOLTAGE

PROFILER**1 – GERHARD DESIGNING

AND MANUFACTURINGUV EXPOSURE UNIT**

**Items may only be purchased by industrial buyers

AIR COMPRESSORS & DRYERS • PLANT SUPPORT EQUIPMENT

For more information, please visit us on the web at www.hilcoind.com 7

2012

2011

2012

2012 AIR COMPRESSORS & DRYERS 2 – KAESER SFC160 AIR COMPRESSORS, S/Ns 1064, 1065, (2012), with Sigma

2 Digital Controller, PN# DSDX.2C, 125psig, 460Y/266V, 3ph, 60 Hz, 1800RPM, 250HP1 – KAESER KBD900 PRESSURE SWING REGENERATIVE DESICCANT COMPRESSED

AIR DRYER, S/N 1000002742133, 900 SCFM @ 100PSIG, 460VAC, 3 Phase, 60 Hz,HTR = 17kW, Motor = 4 HP, 120F Max Operating Temperature

1 – HIRSCH INTERCHANGE MD-8 DRYER, 480V, 3 Phase, 60 Hz, with Digital ConveyorSpeed and Temperature Control

WATER CHILLERS1 – ADVANTAGE MK-15A-41HBX CHILLER, (2002), 2000LE Series, 460V, 3 Phase,

60 Hz, with R-22 Refrigerant1 – TRANE TEH420A4DR0C3FA1A0C 35 TON CHILLER, (2006), 460V, 3 Phase, 60 Hz,

with R-22 Refrigerant1 – YORK YPAL060CCB46RRDX 60 TON CHILLER, 460V, 3 Phase, R407C Refrigerant

HVAC UNITS 1 – GOVERNAIR WF-RSA-RBH120 HVAC UNIT, (2012), 460V, 3 Phase, 60 Hz, Natural

Gas, HF-4000 Heater Mod4 – GOVERNAIR WF-RSA-RBH110 HVAC UNITS, (2012), 460V, 3 Phase, 60 Hz, Natural

Gas, Fans, HF-2000 Heater Mod

GENERATOR 1 – CUMMINS DFEG-1201587 350KW DIESEL GENERATOR, (2011)

PLANT SUPPORT EQUIPMENT1 – ATA BRILLIANT 220 GLASS SAW, (2011), Digital Display Controller, Internal

Adjustable X, Y, Z Axis1 – NPC REAR PANEL GLASS PLACE UNIT, with ~30'L of Conveyance and Panel

Pneumatic Pick and Place Slider on X-Axis1 – GRACO PR70 POTTING STATION, Edwards 8 Vacuum Pumps, Stainless Steel

Vessels with Homogenizers**1 – SEEDER CO. EXCEL FLOW SYSTEMS CONVEYANCE SYSTEM1 – PACK OUT BUFFER SYSTEM1 – CONVEYANCE TURN TABLE, 6'L1 – FLIPPER STATION, 5'L6 – CTI CRYOGENICS 9600 COMPRESSORS6 – FORK TRUCKS, ranging from 5,000 - 35,000lb Capacity90+ – VAT 10” HV GATE VALVES, New in Box, with Pneumatic Actuators40+ – EDWARDS IXA2205C TURBO MOLECULAR PUMPS, (2011), in Original Boxes10+ – EDWARDS IXL500Q VACUUM PUMP SYSTEMS, (2012), Unused20+ – MKS DCG 200Z DC PLASMA GENERATORS, (2011), Optima SeriesQUANTITY OF (6) GE ELECTRICAL SUPPORT EQUIPMENT UNITS (2012), EachConsisting of GE Breakmaster Load Interrupter Switch, GE Industrial Solutions Dry TypeDistribution Transformer, 3-Section GE Spectra Series Switchboard Set

Partial Listing Only, Please Visit Our Website

www.hilcoind.comFor Complete Lot Catalog

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • GEP1897 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

FollowUs on:

A Hilco Global Company

Vested in Your Success

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995

www.hilcoind.com

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial ONLINE AUCTIONTerms of Sale

An 18% buyer's premium will be charged on all assets.The buyer’s premium will be reduced to 16% for paymentsmade by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48hours of sale close. Everything will be sold online to thehighest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted online. All items will be sold “as is, where-is” without any warranties, expressed or implied. Althoughobtained from sources deemed reliable, the Auctioneermakes no warranty or guarantee to the accuracy of theinformation herein contained. Bidders are encouraged tothoroughly inspect the items on which they intend to bidprior to sale. Absolutely no items will be removed until theday after the conclusion of the sale and payment is madein full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website atwww.hilcoind.com for any date, sale process, terms andconditions and list of available assets.Payment: ALL  PURCHASES  MUST  BE  PAID  IN  FULL  ONTHE  DAY  OF  THE  AUCTION. If you intend to pay by wiretransfer, we will accept payment the day after the sale ONLYIF  a deposit of 25% of total purchases is made on the day ofthe sale. Contact our office for wire transfer instructions. Onlycash, wire transfer or certified check, payable to HilcoIndustrial will be accepted. Company checks payable to HilcoIndustrial will be accepted only if accompanied by a bank let-ter of guarantee, (see sample letter below). All sales are sub-ject to sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of their enti-tlement to claim such exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at theAuction of GE Solar (Primestar) on May 8-15, 2014.

Due to the closure of the former GE Solar (Primestar) Facilities in Aurora & Arvada, CO