A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207Farmington Hills, Michigan 48334

Ph 877.37.HILCO (44526) • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

Sale is being held in conjunction with

21700 Northwestern Hwy • Suite 1180Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

AUCTIONEERS • LIQUIDATORS • APPRAISERS

FLINT POWERTRAIN NORTH

Hilco Industrial, LLC & Maynards Industries

2-DAY WEBCAST/ONSITE AUCTIONOVER 3,000 LOTS

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)2

FLINT POWERTRAIN NORTH

AUCTION LOCATIONGENESYS CONFERENCE & BANQUET CENTER801 HEATH PARK BLVD. • GRAND BLANC, MI 48439

DIRECTIONS TO AUCTIONFROM BISHOP INTERNATIONAL AIRPORT: HEAD WEST TOWARD W BRISTOL RD. TURN RIGHT ATW BRISTOL RD. SLIGHT RIGHT TO MERGE ONTO I-75 S/US-23 S TOWARD DETROIT/ANN ARBOR.CONTINUE TO FOLLOW I-75 S FOR 7.3 MILES AND TAKE EXIT 108 FOR HOLLY RD. TURN RIGHTAT HOLLY RD. AND TAKE THE 2ND RIGHT ONTO HEALTH PARK BLVD/HEATH PARK BLVD.

PREVIEW LOCATIONLEITH STREET, EAST GATE • FLINT, MI 48550

DIRECTIONS TO PREVIEWFROM FLINT’S BISHOP INTERNATIONAL AIRPORT: EXIT AIRPORT ON TO BRISTOL ROAD. TURNRIGHT ON BRISTOL ROAD AND PROCEED EAST 1/2 MILE TO I-75. FOLLOW SIGNS TOWARDS I-75NORTH, STAYING IN THE RIGHT LANE TO MERGE ONTO I-69 EAST. TRAVEL EAST ON I-69 3 MILESTO EXIT #137, I-475. TAKE I-475 NORTH 2 MILES TO EXIT #8B, DAVISON ROAD/HAMILTONAVENUE. TURN LEFT ON HAMILTON AVENUE, PROCEED 1/2 MILE TO JAMES P. COLE BLVD. TURNRIGHT ON JAMES P. COLE BLVD. AND PROCEED 1/2 MILE TO LEITH STREET. TURN LEFT INTO THEGM POWERTRAIN COMPLEX, LEITH STREET EAST GATE. CHECK IN WITH SECURITY FOR FURTHER INSTRUCTIONS. FROM THE DETROIT AREA: TAKE I-75 NORTH TOWARDS FLINT. APPROACHING FLINT, TAKE I-475 NORTH. FOLLOW I-475 NORTH TO EXIT #8B, DAVISON ROAD/HAMILTON AVENUE. TURNLEFT ON HAMILTON AVENUE, PROCEED 1/2 MILE TO JAMES P. COLE BLVD. TURN RIGHT ONJAMES P. COLE AVENUE AND PROCEED 1/2 MILE TO LEITH STREET. TURN LEFT INTO THE GMPOWERTRAIN COMPLEX, LEITH STREET EAST GATE. CHECK IN WITH SECURITY FOR FURTHERINSTRUCTIONS.

2-DAY AUCTIONWED. & THURS., DECEMBER 8TH & 9TH

BEGINNING AT 10AM LOCAL EA. DAY

2-DAY PREVIEWMONDAY & TUESDAYDECEMBER 6TH & 7TH

9AM TO 4PM LOCAL & MORNING OF SALE

(41) CNC TURNING CENTERS17 – HARDINGE CONQUEST T-51 CS-51 2-AXIS CNC TURNING CENTERS, S/Ns CL-374-C, CL-287-CGM,

CL-291-CGM, CL-376-C, (3) N/A (1996), CL-590-BC, CL-593-BC, CLT-468-C, CL-594-BC, CL-589-BC, CL-588-BC, CL-591-BC, CL-292-CGM, CLT-422-C (1995), Hardinge /GE Fanuc 32-BIT OTC Control Max. TurningDiameter (est.) 10.4, Max. Turning Length (est.) 22.8”, Spindle Speeds to 4200 RPM, 20-HP, Power Steady Rest,S/N CLT-469-C; GE Fanuc Series 18-T Control (est.) 15” Max. Turning Diameter, (est.) 24” Max. Swing, PowerCollet Closer Chuck, Power Enclosure Door, All with Distance Between Centers (est.) 24”, 12-Position Tool Turret,Power Tailstock, Mist Collector, Flood Coolant, AC Motorized Chip Conveyor, Triad Microguard Light Curtain,*Note: Some Machines May Be Incomplete

15 – HARDINGE CONQUEST T-42 SG-42 2-AXIS CNC TURNING CENTERS, S/Ns SGA-1871-B, SG-834-B, SG-830-B, SG-797, SG798, SG-835-B, SG-833-B, SG-827-B, SG-832-B, SG-828-B, SG-687, SG-829-B, SG-831-B, SG-796, SG-795 (1995), GE Fanuc Series 18-T Control; Turning Diameter (est.) 9.4”, Turning Length (est.) 13.7”,Distance Between Centers (est.) 20”, Spindle Speeds to 5000 RPM, 10-HP, 12-Position Tool Turret, Power Tailstock, Power Collet Closer Chuck, Coolant, Enclosure, *Note: Some Machines May Be Incomplete

9 – HARDINGE CONQUEST VT-200 2-AXIS CNC VERTICAL TURNING CENTERS, S/N VL-122-2, VL-108-2, VL-116-2, VL-123-2, VL-117-2, VL-115-2, VL-105-2, VL-107-2, VL-109-2 (1995), GE Fanuc Series 18-T Control,Single 16” Vertical Workpiece Chuck, Turning Diameter (est.) 15.7”, Turning Length (height) (est.) 19.8”, 12-PositionTool Turret, Pick-N-Place Loader Arm, 18.5 / 22 KW Spindle Motor, *Note: Some Machines May Be Incomplete

(8) CNC VERTICAL MACHINING CENTERS7 – HARDINGE CONQUEST VMC-700 CS-MC CNC VERTICAL MACHINING CENTERS,

S/N MC-119, MC-120, MC-118, MC-111, NA, MC-115, MC-113 (1995), GE Fanuc Series 18-M Control, Table Size 19” x 42”, 21-Position Automatic Toolchanger, CAT # 40 Spindle Taper,*Note: Some Machines May Be Incomplete

1 – MAZAK VQC-15/40 CNC VERTICAL MACHINING CENTER, S/N 86456 (1989), Mazatrol M-32 Control, Table Size 16” x 35”, 40 Taper Spindle, 16-Position Automatic Toolchanger,Coolant, Chip Conveyor, Enclosure

CNC TURRET DRILLS6 – HURCO ACROLOC AF-12-20 CNC VERTICAL TURRET DRILLS, S/Ns AF-9002096A

(1996), AF-9003096A (1996), AF-9002044A (1994), AF-9001044A (1994), AF-9004096A(1996), & AF-9001096A (1996), GE Fanuc Series O-M Control, Table Size 14” x 30”, 12-Position Tool Turret, 4th Axis Servo Indexer With Power Tailstock

CNC VERTICAL MILLING MACHINES1 – TREE JOURNEYMAN CNC VERTICAL MILLING MACHINE, MODEL 425, S/N 9-42-90-5043,

Table Size 12” x 51”, DynaPath Systems Delta Series CNC Control, Coolant, MODEL 325, S/N9-25-85-5116, Table Size 9-1/2” x 44”, DynaPath Systems Delta 20 Control (Incomplete), Coolant

FURTHER INFORMATION• A BUYERS PREMIUM OF 13.5% FOR ALL ONSITE SALES & 16% FOR

ALL WEBCAST SALES WILL BE IN EFFECT. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS FRIDAY, DECEMBER 31, 2010 WITH HOURSOF REMOVAL BETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. AFTERTHE NOTED DEADLINE AT 4PM THE BUYER WILL INCUR A COST OF$500 FOR ENTRY INTO THE FACILITY.

• FOR FURTHER INFORMATION ON MACHINERY & EQUIPMENT, PLEASECONTACT KEN PLANET AT 248.254.9999 x33 OR EMAILKPLANET@HILCOIND.COM OR MARIO MAZZUCA AT 248.569.9781 ORMARIO@MAYNARDS.COM

• FOR PAYMENTS PLEASE CONTACT BECKY KUZNICKI AT 517.719.8134OR EMAIL BECKY@MAYNARDS.COM

• CUSTOMER SERVICE, PLEASE CONTACT SANDI NEELY AT248.254.9999 X16 OR EMAIL SNEELY@HILCOIND.COM

• REMOVAL OF ITEMS REQUIRING DISCONNECT AND RIGGING TO BEPERFORMED BY MLC APPOINTED RIGGER AT PURCHASER’S COST.

2-DAY WEBCAST/ONSITE AUCTION OVER 3,000 LOTS

PLEASE NOTE:

MLC FLINT SALE #2 - JANUARY 18TH

PLEASE CHECK WWW.HILCOIND.COM FOR DETAILS

For more information, please visit us on the web at www.hilcoind.com 3

CNC TURNING & MACHINING CENTERS • CNC, JIG & SURFACE GRINDERS

ROTARY SURFACE GRINDERS 1 – CINCINNATI MILACRON-HEALD 161-8” HORIZONTAL SPINDLE ROTARY SURFACE GRINDER,

S/N 48620, 8” Wheel Size, 8” Diameter Electromagnetic Chuck, Universal Table, Coolant1 – CINCINNATI MILACRON HEALD 161 8” HORIZONTAL SPINDLE ROTARY SURFACE GRINDER1 – ARTER D-16 16” HORIZONTAL SPINDLE ROTARY SURFACE GRINDER, S/N 57-3610,

16” Wheel Size, 17” Diameter Electromagnetic Chucks

SURFACE GRINDERS1 – THOMPSON C 20” X 96” HYDRAULIC SURFACE GRINDER, S/N 8CD646842, 2-Piece

Electromagnetic Chuck, Wheel Size 22” x 3-1/2”, 20-HP Wheelhead, Coolant, External HydraulicPower Unit

1 – GALLMEYER & LIVINGSTON “GRAND RAPIDS” 256 6” X 18” HYDRAULIC SURFACEGRINDER, S/N 256208, Electromagnetic Chuck, Coolant

2 – BROWN & SHARPE 618 MICROMASTER 6” X 18” HAND FEED SURFACE GRINDERS, S/Ns 523-6180-5570 & 523-6181-5569, 6” x 12” Electromagnetic Chuck With MinaTron Variable Controller

1 – BROWN & SHARPE 618 MICROMASTER 6” X 18” HYDRAULIC SURFACE GRINDER, S/N 523-6181-9111, 6” x 18” Electromagnetic Chuck With Neutrofier II Variable Control

1 – DOALL D6-1 6” X 18” HYDRAULIC SURFACE GRINDER, S/N 39378989, 6” x 18” Electromagnetic Chuck1 – CLAUSING COVEL 4014 6” X 18” HYDRAULIC SURFACE GRINDER, S/N 10HS-9006,

Electromagnetic Chuck With Neutrofier Variable Control

CENTERLESS TOOLROOM GRINDER 1 – UNISON DEDTRU 288-0000 CENTERLESS TOOLROOM GRINDER, S/N 7062-C-3526,

Harig 618 Hand Feed Base, S/N 7062-W, Model C Motorized Centerless Attachment, Coolant,AcuRite Qwikcount 2-Axis Readout

DRILL POINT GRINDERS2 – GIDDINGS & LEWIS / DAVIS AMCA INTERNATIONAL TYPE WINSLOMATIC 100C DRILL

POINT GRINDERS, S/Ns 941-00218-86 & 947-00196-871 – GIDDINGS & LEWIS BICKFORD / WINSLOMATIC 100-C DRILL POINT GRINDER1 – OLIVER 910 DRILL SHARPENER, S/N F4818V

BROACH & HOB CUTTER GRINDERS 1 – THOMPSON 6P HORIZONTAL RECIPROCATING BROACH SHARPENER / GRINDER,

S/N 6PEA69699, 12” x 70” Universal Electromagnetic Chuck, Table Size 13-1/2” x 96-1/2”, Woods1.5-HP 3600 RPM Universal Grinding Spindle, Hydraulic Power Unit

2 – STAR CUTTER 2VHS VERTICAL HOB SHARPENERS, S/Ns 13186 & 13817, Coolant, Enclosure1 – HERTLEIN CSG-12-AR CUTTER SHARPENER / GRINDER, S/N CSG-9810, Coolant, Enclosure2 – COLONIAL & DETROIT BROACH GRINDERS

(9) CNC TOOL & CUTTER GRINDERS2 – WALTER HELITRONIC POWER PRODUCTION MULTI-AXIS CNC TOOL & CUTTER GRINDERS, S/Ns 653013

& 653014 (BOTH 1999), Walter HMC 500 CNC Control, Smog Hog Mist Collector, Kidde Scorpio FireSuppression System, Enclosure, *Note: Coolant System Shared With BT #44907 & #44906, Listed Separately

1 – COOLANT SYSTEM, Used Jointly With Walter Helitronic Production Tool & Cutter Grinders, Dual System,With Centrifuge & Supply Pump

1 – HUFFMAN HS-87R 7-AXIS CNC TOOL & CUTTER GRINDER, S/N HB121386, w/o 290, GE Mark Century2000 Console Control, Travels: 18” (457 mm) Wheelhead Y Axis, 18” (457 mm) Wheelhead Z Axis, 24” (610mm) Cutter X Axis, 12” (305 mm) Cutter U Axis, 8” (127 mm) Cutter V Axis, 360 Degrees Cutter A Axis, 180Degrees Cutter C Axis, Coolant System, Smog Hog Industrial Air Cleaner Mist Collector, Enclosure

2 – WALTER HELITRONIC POWER PRODUCTION HELITRONIC 150 CNC 4-AXIS CNC TOOL & CUTTERGRINDERS, S/N 5025 & 5024 (BOTH 1988), Type HELI-50-NC-RS-4 Walter HMC-150 CNC ConsoleControl Enclosure, Aercology Mist Collector, Coolant Filtration & Recirculation System

1 – WALTER HELITRONIC HMC-300 5-AXIS CNC TOOL & CUTTER GRINDER, S/N 895 (1993), Type 50 NC-Date 5/85, Type 50/5R-H-300, Date of Manufacture: Control Dec / 1993, With Polycon Model C-20TP CoolantFiltration & Recirculation System, Aercology Mist Collector

1 – HUFFMAN HS-75R 5-AXIS CNC TOOL & CUTTER GRINDER, S/N 525647-1189, GE Fanuc Series 15-MCNC Console Control, (5) CNC Controlled Axes, (2) Manually Controlled Axes, Max. End Mill Shank 1’’ Dia,Min. End Mill Shank 3/8’’ Dia, Max. Flute Length 6’’, Max. Overall Tool Length 8’’, Travels, 12’’ (305mm)Wheelhead Z Axis, 15’’ (381mm) Wheelhead Y Axis, 18’’ (457mm) Main Base Slide X Axis, 360 DegreeWorkhead Rotary Spindle A Axis, 220 Degree Rotary Table C Axis, 8’’ (203mm) Manual U Axis, 4’’ (102mm)Manual V Axis, 6000 RPM Wheelhead, Hydro Flow Coolant System, Smog Hog Industrial Air Cleaner, ModelSH-20-PE-H Mist Collector, Ansul AutoPulse 1000 Fine Suppression System, Enclosure

2 – WALTER HMC HMC-150 4-AXIS CNC TOOL & CUTTER GRINDERS, S/N 409/452 & 451 (BOTH 1989),Type 30 NC-4V, Console CNC Control, Coolant

CNC JIG GRINDER1 – NASA AGS-3 CNC JIG GRINDER, S/N 0116, Retrofitted Moore No. 3, Base, S/N G1912, Fagor CNC Control

CYLINDRICAL & UNIVERSAL GRINDERS1 – LANDIS TYPE 4R PLAIN 18” X 144” OD CYLINDRICAL GRINDER, S/N 852-7, Plain Wheelhead, Wheel

Size 24” x 2-3/4”, 1-1/2-HP DC Motorized Workhead, Plain Tailstock, Coolant With Barnes Drill Filtration Unit1 – BROWN & SHARPE 814U VALUMASTER UNIVERSAL GRINDING MACHINE, S/N 525-8144-2919,

Double End Universal Wheelhead, (4) Motorized Workhead Speeds 128-540 RPM, (6) Power Table Speeds 7.7 – 100 IPM, Coolant

1 – CINCINNATI MILACRON D-H 10” X 24” UNIVERSAL HYDRAULIC OD CYLINDRICAL GRINDER, S/N 35252B73-0002, Motorized Workhead With 50 – 500 RPM Variable Speeds, Tailstock, Power TableReels, Coolant

1 – BROWN & SHARPE NO. 3 14” X 36” UNIVERSAL OD CYLINDRICAL GRINDER, S/N 521-3-48, DoubleEnd Universal Wheelhead, Motorized Workhead, Coolant

1 – BROWN & SHARPE NO. 13 UNIVERSAL & TOOL GRINDING MACHINE, S/N 525-13-7431 – JONES & SHIPMAN 12” X 60” UNIVERSAL OD CYLINDRICAL GRINDER

PLEASE NOTE: MLC FLINT SALE #2 - JANUARY 18TH PLEASE CHECK WWW.HILCOIND.COM FOR DETAILS

CENTERLESS, ID, DISC GRINDERS • GEAR HOBBERS, SHAPERS, SHAVERS

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)4

(35) CENTERLESS GRINDERS3 – CINCINNATI MILACRON 350-20 3AE TWIN GRIP CENTERLESS

GRINDERS, S/Ns 3566A0185-0002 & 3566A0185-0025,3566A0185-0003, CNC Rebuilt / Retrofit, AEG Modicon PanelMate PLC Touch Screen Pendant Operator’s Control, Servo DriveDressers & Feed, Thru-Feed Workrest With Automated MagazineFeeder, Independent Coolant System With Magnetic Separator &Recirculation Pumps, Free Standing Mist Collector

7 – CINCINNATI MILACRON 330-15 DE CENTERLESS GRINDERS,S/Ns 350415H80-0012, 350415H76-0009, 350415H76-0008,350415H76-0007, 350415H80-0001, 350415H78-0009,350415H81-0001, Thru-Feed Workrest, Hydraulic Power Dressers, VariableSpeed & Feed Regulating Wheel, (1) Stored - Not Complete

8 – CINCINNATI MILACRON 325-12 CENTURAMIC CENTER-LESS GRINDERS, S/Ns 350412H78-0012, 350412H5Z-0027,350412H79-0056, 350412H79-0043, 350412H79-0037,350412H79-0042, 350412H78-0011, 350412H79-0036, CNCRetrofit / Rebuild, Modicon Panel Mate Plus PLC Control, ServoDrive Dressers & Feed, Infeed Type Workrest With AutomatedPick-N-Place, With (1) Eriez Model ICCMC Coolant FiltrationSystem, Magnetic Separator, Recirculation Pumps Mist Collector

3 – CINCINNATI MILACRON 325-12 DE CENTURAMIC CENTERLESS GRINDERS, S/Ns 350412H79-0078,350412H78-00079 & 350412H78-0013, Thru-Feed Workrest,Power Auto-Truing Wheel Dresser With Manual Traverse, PowerRegulating Wheel Speed & Feed Adjustments, PowerRegulating Wheel Dresser, (Stored – Not Complete)

5 – CINCINNATI MILACRON 325-12 DE CENTERLESSGRINDERS, (2) Not In Service -Incomplete

9 – CINCINNATI MILACRON 220-8 DR CENTERLESSGRINDERS, (1) Incomplete

DISC GRINDERS3 – GARDNER SDG3-30 DOUBLE END OPPOSED HORIZONTAL

DISC GRINDERS, S/Ns 870-8, 870-9 & 870-10, (2) 30-HPGrinding Spindle Motors, 30” Diameter Grinding Wheels,Motorized Rotary Carousel Workpiece Carrier Incremental Feed,Control Gaging D500 Programmable In-Process Gaging, Push-Button Operator’s Control Station, Main Control Panel WithGould Modicon 484 PLC

1 – GARDNER DOUBLE END OPPOSED HORIZONTAL DISCGRINDER, S/N NA, (2) 30-HP Grinding Spindle Motors,Motorized Thru-Feed Workpiece Carrier, Air Tronics In-ProcessGaging, AcuRite Qwik Count Readout, Incremental Feed, Push-Button Operator’s Control Station, Control Panel

ID GRINDERS 2 – BRYANT LECTRALINE LL2 CNC ID GRINDERS, S/N sNA , Bryant

Teachable III Control, Bryant 50,000-RPM High Speed ID Grind Spindle1 – CNC ID GRINDER, S/N NA, Bryant Teachable III Control, Bryant

50,000 RPM High Speed ID Grinding Spindle

HONE 1 – SUNNEN MBB-1800-E POWER STROKING PRECISION

HONING MACHINE, S/N 73055

(14) CHUCKING GRINDERS4 – CINCINNATI MILACRON NO. 2, TYPE T MD CHUCKING

GRINDERS, S/Ns 3515H0180-0002, 3515H0180-0003,3515H0180-0004 & 3515H0180-0005, Auto Cycle, AutomaticDiamond Truing, Auto Load / Unload, 18-1/2 x 1/2 x 12 OD WheelSize, Main Control Panel With Gould Modicon 484 PLC, Operator’sPanel With Push-Button Controls & Status Lights, Enclosure

10 – CINCINNATI MILACRON NO. 2 TYPE N-MICROCENTRIC MDCHUCKING GRINDERS, S/N 3515G0180-0011, 3515G0180-0013, 3515G0180-0010, 3515G0180-0009, 3515G0180-0034,3515G0180-0033, 3515G0180-0030, 3515G0180-0032,3515G0180-0031, 3515G0180-0029, Automatic Load / Unload,Automatic Diamond Truing, Main PLC Control Panel, Operator’sStation With Push-Buttons & Status Lights, Enclosure

HORIZONTAL BORING MILL1 – GIDDINGS & LEWIS 340-T 4” TABLE TYPE HORIZONTAL

BORING MILL, S/N 6994, 4” Spindle Bar Diameter, Table Size40” x 74”, Main Spindle Speeds 7.5 – 450 RPM, AuxiliarySpindle Speeds 25 – 1500 RPM, 48” Vertical Travel, MorseTaper, Acu-Rite Readout

MISC. TOOLROOM MACHINES(22) Oliver, Star, Royal Oak, Seneca Falls, Cincinnati, P&W, Leblond Tool& Cutter Grinders, (3) Ex-Cell-O Center Lap Machines, (6) CincinnatiMilacron, Cincinnati, Bridgeport, Gorton, K&T Milwaukee Mills, P&W &Fosdick Jig Bores, Engine Lathes, Radial Drill, Morrison Keyseater, (10)Drill Presses, (10) Double End Grinders, (4) Abrasive Belt Grinders,Double End Belt Sander/Polisher, Morrison Keyseater, Electro-Arc MetalDisintegrator , Barber Colman Gear Hobber, Hannifin 2-Post HydraulicPress, Everett 20- Abrasive Cut-Off Saw, Double End Grinders

GEAR CHECKERS2 – ITW ILLITRON 3412B-3C VARIABLE INVOLUTE GEAR

MEASURING INSTRUMENTS, S/Ns 10225 & 10816

(82) GEAR HOBBERS48 – FAYSCOTT / LEES – BRADNER TYPE 7VH GEAR HOBBING

MACHINES, S/Ns 7VH-2048 thru 7VH-2082, 7VH-1937 thru7VH-1977

23 – WATERBURY FARREL / CLEVELAND RIGID 1886-606 GEARHOBBERS, S/Ns 3275-79-8648 thru 4067-80-6642, MainControl Panel With Gould Modicon 484 PLC, Operator’s Push-Button Control Panel With Status Lights, Auto Load / Unload

9 – DETROIT / COSA GEAR HOBBERS, Auto Load / Unload,Main PLC Panel With Operator’s Station

2 – MITSUBISHI GH201 GEAR HOBBERS, S/N 220389, N/A, D.Max. 8”, D.P. Max. 6, Weight Max. 1430-Lbs., Push-ButtonRelay Controls

(120) GEAR SHAPERS 120 – FELLOWS / MTD NO. 10-2 GEAR SHAPERS, (4) S/Ns

36484, 36307, N/A, With CNC Retrofit / Rebuild With Cutler-Hammer Power Series Panel Mate PLC Touch ScreenOperator’s Pendant Control, AEG PLC, AEG Cyberline ServoDrives, (116) S/Ns 35322 thru 36516, With Auto Load / Unload,Main Control Panel With Gould Modicon 484 PLC, Operator’sPush-Button Control Panel With Status Lights, *Note: SomeMachines May Be Incomplete

(42) GEAR SHAVERS 41 – NATIONAL BROACH / RED WING GCU GEAR SHAVERS, S/Ns

GCU-3026 thru 3414, Auto Load / Unload, Main PLC Control Panel,Operator’s Push-Button Panel With Status Lights, S/N GCR-3348,Internal Gear Shaver

GEAR HONING MACHINES1 – NATIONAL BROACH / RED WING GHH HORIZONTAL GEAR HON-

ING MACHINE, S/N GHH-599, Auto Load / Unload, Auto Cycle, MAMPLC Control Panel, Operator’s Push-Button Station Barnes Drill Co.Model MPE-10 Kleenall Coolant Magnetic & Fabric Filter

2 – NATIONAL BROACH / RED WING GHB & GHC-12 INTERNAL

GEAR CHAMFER / GRIND MACHINES 2 – REDIN GEAR CHAMFER / GRIND MACHINES, S/Ns 11776-1 &

11776-2, Auto Load / Unload, Dust Collector, Main Control Panel2 – HURTH SRS-402 & SRS-400 GEAR GRINDERS

AUTOMATIC HOB GRINDER1 – KLINGELNBERG SNC-30 AUTOMATIC HOB GRINDER, S/N 3936, Independent

Coolant System With 30’’ Paper Media Filter, Torit DryFlo Mist Collector

GEAR CHECKING EQUIPMENT2 – M & M SYSTEMS 3515 GEAR ANALYZERS, S/Ns 6124 (1999), N/A2 – ITW ILLITRON 2280 & 2280-I-30 GEAR CHARTERS4 – ITW ILLITRON GEAR MEASURING INSTRUMENTS, (2) 3412B-3C

VARIABLE INVOLUTE, (2) 3912A-3C HELICAL LEAD1 – FELLOWS 600RL RED LINER GEAR CHECKERS

PLEASE NOTE: MLC FLINT SALE #2 - JANUARY 18TH PLEASE CHECK WWW.HILCOIND.COM FOR DETAILS

SPLINE ROLLERS • BAR MACHINES • SHEARS • BRAKES • INDEX MACHINES

For more information, please visit us on the web at www.hilcoind.com 5

(8) SPLINE ROLLERS3 – ANDERSON COOK 330-S MARAND SPLINE ROLLERS,

S/Ns 239, 348, & 240, 24” Tool Rack Length, 48” UnderarmTailstock Support With Overhead Pick-N-Place Loader Arm,Cutler Hammer Panel Mate Power Series Touch ScreenPLC Control, With RHM Fluid Power 25-HP DetachedHydraulic Power Unit, Insulated Noise SuppressionEnclosure, Thermal Transfer Fan Cooled Heat Exchanger

3 – ANDERSON COOK / MICHIGAN DIV. REBUILD 330-S &MARAND SPLINE ROLLERS, S/Ns 347, 3011 & 3977

2 – ANDERSON COOK 330 MARAND FORMER 24” SPLINE

AUTOMATIC BAR MACHINES6 – CONOMATIC 3 1/4-8 3 1/4” 8 SPINDLE AUTOMATIC

BAR MACHINE, S/N 12573-GSC, 12520-GSC, 12572-GSC, 12574-GSC, 12606-GSC & 12526-GSC, With StockReel, Bundle Unscrambler Rack/Loader

IRONWORKERS1 – HILL ACME KLING NO. 4 METALWORKER HYDRAULIC

IRONWORKER, S/N 489654, Capacities: Shearing - Flatsup to 5/8” x 7” – 3/8” x 8 1/2”, Squares up to 1 1/2”, Roundsup to 1 3/4”, Angles Square up to 4” x 4” x 1/2”, AnglesMitre up to 3” x 3” x 5/16”, Tees Square up to 3” x 3” x 3/8”,Punching - Maximum 13/16” Hold Thru 3/4” Plate, Coping– Square Notch 2 3/4” x 2 3/4” x 3/8”, 90 Degree V Cope2 3/4” x 4” X 3/8”, Flanges & Beams & Channels 4” to 7”

1 – SCOTCHMAN 6509 HYD. IRONWORKER, S/N 4486M592,65-Ton Punch Capacity, 6” x 6” Angle Shear, 24” Flats Shear

3 – SCOTCHMAN 4014-OT, 4014C-OT & 4014 HYDRAULICIRONWORKERS, 40-Ton Capacity, 6 Position TurretPunch, 3” x 3” Angle Shear, 14” Flats Shear

POWER BENDING ROLLS1 – HENDLEY & WHITEMORE 48” INITIAL TYPE POWER

BENDING ROLLS, S/N 160741 – WYSONG B-48 12 & 14 GAUGE X 48” CAPACITY

INITIAL TYPE POWER BENDING ROLLS, S/N PR14-3812 – PEXTO 14 &16 GAUGE X 36” INITIAL TYPE POWER

BENDING ROLLS

SHEARS1 – NIAGARA 1L-10 10’ X 3/16” POWER SQUARING SHEAR,

Top Mechanical Drive, 18” Throat, 7’ Squaring Arm1 – WYSONG 1096 10 GA. X 8’ POWER SQUARING

SHEAR, S/N P7-503, 24” Backgauge1 – PEXTO S-372-E 10 GA. X 6’ POWER SQUARING

SHEAR, S/N M-425

BENDING BRAKES1 – PROMECAM RG-80-30 HYDRAULIC PRESS BRAKE,

10’ Bed & Ram Length, 104” Between Housings2 – DREIS & KRUMP CHICAGO PB10187 3/16” X 10’

POWER LEAF BENDING BRAKES2 – DREIS & KRUMP CHICAGO FINGER TYPE BENDING BRAKES1 – 72” HAND OPERATED BENDING BRAKE

HYDRAULIC SHOP PRESSES1 – OTC POWER TEAM “ROLL-BED” 210324 80/100-TON CAPACITY H-FRAME

HYDRAULIC PRESS, S/N 1080, 50” Between Uprights, Roll-Out Bottom Rail,Adjustable Top Rail, Auxiliary Electric Hydraulic Power Unit

1 – H-FRAME HYDRAULIC PRESS, Estimated 100-Ton1 – CIMCO C-FRAME HYDRAULIC PRESS

BANDSAWS4 – MARVEL SERIES 8 UNIVERSAL TILT FRAME VERTICAL BANDSAWS1 – TANNEWITZ GUINE 36” VERTICAL BANDSAW1 – LOCKFORMER 24S 24” VERTICAL BANDSAW2 – DELTA & ROCKWELL 20” VERTICAL BANDSAWS1 – DAKE JOHNSON R 7” HORIZONTAL BANDSAW1 – MARVEL SERIES 8 MARK I UNIVERSAL TILT FRAME VERTICAL BANDSAW, S/N 824080-W1 – DOALL JOB SELECTOR 26” VERTICAL BANDSAW, S/N 26502210, Variable

Blade Speeds 50 – 1600 FPM

AUTOMATIC SHAFT STRAIGHTENERS 2 – HESS-MAE 311 AUTOMATIC SHAFT STRAIGHTENER MACHINE, S/N NA (1997),

MAE & Power Pro Panel Mate PLC Touch Screens, Indramat Digital Drive System,24” Max. Shaft Length, Main Control Panel With AEG PLC & Indramat Drive Controls

1 – IMPCO THRU-FEED AUTO SHAFT STRAIGHTENER, 15” Shaft Length

AUTOMATIC SHAFT POLISH & BRUSH MACHINES 4 – ACME MICRO POLISHER ABRASIVE STRIP TYPE POLISHERS, S/Ns 27549R,

27546, 27547, 27548, Single Lane Infeed & Outfeed, Enclosure, Operator’s Push-Button Control Station With Status Indicator Lights, Self-Contained Coolant

3 – IMPCO THRU-FEED SHAFT BRUSH & POLISH MACHINES1 – B&K MULTI-STATION THRU-FEED SHAFT POLISHERS

(13) BROACHING MACHINES6 – GENERAL BROACH & ENGINEERING (6) GBBS-25-6 25-TON X 6” STROKE

& (1) GBE-20-42 20-TON X 42” STROKE SINGLE RAM VERTICAL & (3) GBPU-20/36 PUSH-UP HYDRAULIC BROACHES

2 – US BROACH & MACHINE CO 10TX42 VPD 10-TON X 42” STROKE VERTICALPULL-DOWN HYDRAULIC BROACHES

4 – ASTRO BROACHING ABU-24 SINGLE RAM VERTICAL HYD. BROACHES1 – DETROIT BROACH CH-60 HORIZONTAL CHAIN BROACH (Stored – Not Complete)

(72) PRODUCTION TURNING & BORING MACHINES 8 – SAGINAW MACHINE VC-300-3 3-SPINDLE CAM VERTICAL PRODUCTION

BORING / TURNING MACHINES, S/Ns 1951-0981, 1952-1081, 1949-0781, 1950-0981, 1962-0881, 1835-1080, 1963-0981, 1964-0283, (3) Vertical Spindles WithPower Collet Hub Chucks, 6-Station Gang Type Overhead Tool Slide, SingleSpindle Drive Motor, Shuttle Slide Automatic Load / Unload, Mezzanine MountedMain Control Panel, Allen Bradley Series 8200 CNC Control Terminal, Operator’sPush-Button Panel

50 – OLOFSSON NO. 75 3-SPINDLE VERTICAL PRODUCTION BORING / TURNINGMACHINES, (32) NO. 75, (3) 44-C, (15) 41-B Autoload

4 – MOTCH & MERRYWEATHER 311-VMP 3-SPINDLE VERTICAL PRODUCTIONBORING / TURNING MACHINES

6 – KASPER SPECIAL 3-SPINDLE CAM TYPE VERTICAL PRODUCTION TURNING/ BORING MACHINES

4 – WERTH SLANT BED 3-SPINDLE PRODUCTION BORING / DRILLINGMACHINES

(17) AUTOMATIC PRODUCTION HONING MACHINES13 – EX-CELL-O MICROMATIC 8-HQ SINGLE SPINDLE

AUTOMATIC HORIZONTAL HONING MACHINES, S/NsH-8519, H-8074, H-8075, H-8072, H-8077, H-8518, H-8076, H-8073, H-8079, H-8080, H-8082 & H-8081, AutoCycle, Automatic Stack Loader & Unloader, Spindle RPM354-Low, 471-Med, 617-High, Honing Fluid Power UnitWith Reservoir, Filter, & Pump, Operator’s Control StationsWith Push-Button Controls, Status Lights, Main ControlPanel With Gould Modicon PLC, Enclosure, S/N H-8523(Not In Service)

4 – EX-CELL-O MICROMATIC 5 VH-2 2-SPINDLE VERTICALHONING MACHINE, S/Ns H-8305, H-8154, H-8155, H-8153,Automatic Transfer, Main PLC Control Panel, Operator’s PanelWith Push-Button Controls & Status Lights

(15) DIAL INDEX MACHINES 7 – KINGSBURY 205 8-STATION DIAL INDEX MACHINES,

S/Ns 13176, 13151, 13152, B-13166, B-13165 & B-13167, B-131442 – KRUEGER MACHINE 6-STATION HORIZONTAL DIAL

INDEX MACHINES, S/Ns 15291 & 152922 – HAHN & KOLB STUTTGART T3-11 VARIOMATIC

11-STATION DIAL INDEX CROSS DRILL MACHINES, S/Ns 113-116 & 112-117

2 – BURTON INDUSTRIES SPECIAL DIAL INDEX DRILLINGMACHINES

2 – B&K 5-STATION & D&B ENGINEERING DIAL INDEX MACHINES

TRANSFER LINES • HEAT TREAT • PARTS WASHING • GEAR INSPECTION

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)6

(10) TRANSFER MACHINING LINES 3 – LAMB 10-STATION PALLET TRANSFER MACHINING LINE, S/N L-3025,

L-3076,L-3077, Closed Loop Pallet Carrier Chain Conveyor, Straight LineMachining With (10) Wing Base Machining Slides – Various Configurations, In-Line Wash / Flush, Operator’s Master Control Station With Push-Button ControlPanels, Overhead Schematic Board With Status Lights, Mezzanine MountedMain PLC Control Panel

2 – CROSS FASTRANSFER 222 TRANSFER-MATIC 25-STATION CLOSEDLOOP TRANSFER TYPE MACHINING LINES, S/Ns NA & 4789, (6) Feed-Pak II Wing Bases With Machining Slides & Heads – Various Configuration,In-Line Thru-Feed Wash Flush & Blow-Off, Operator’s Push-Button ControlConsole With Schematic & Status Indicator Lights, Chain Type Pallet CarrierConveyor System, Mezzanine Mounted Main Control Panel With GouldModicon Programmable Controller

1 – FRASER AUTOMATION HINGE ASSEMBLY TRANSFER LINE4 – ARVID INPUT PINION BORING MACHINES

(14) INDUCTION HARDENING2 – TOCCO INDUCTION SHAFT HARDENERS, MODELS 300KW – 3 KHz MPC

II, S/N 93-4339-12 (1994), 300-3/10T-06H, S/N 95-4562-12 (1995)1 – ANDROID INDUCTION SHAFT HARDENER8 – SURFACE INDUCTION INDUCTION SPLINE HARDENERS2 – AJAX MAGNETHERMIC 2-SPINDLE SCANNER TYPE HORIZONTAL

INDUCTION SHAFT HARDENERS1 – WELDUCTION 2-SPINDLE SCANNER TYPE HORIZ. INDUCTION SHAFT

HARDENER

HEAT TREAT 3 – HOLCROFT #1, #2 & #3 CARBURIZING FURNACE LINES, Holcroft Job #CJ-

4318, #CJ-4318 & #CJ-4458, Natural Gas Fired, Closed Loop Pusher TransferSystem, Carbonitriding Furnace, #3, Quench System, Washer, Draw Furnace,Blast Cool, Pusher Transfers, Main Operator’s Control Station With StatusIndicator Lights, Electrical Panels

1 – MARATHON MONITORS CARBURIZING FURNACE LINE, ProgrammableMonitors Panel With (5) Yokogawa UT750 Programmable Monitors, YukogawaDisplay Monitor

3 – SURFACE COMBUSTION BATCH FURNACES, (2) Charging Cars3 – SURFACE COMBUSTION ALLCASE POWER CONVECTION FURNACES4 – SURFACE COMBUSTION DRAW FURNACES2 – SURFACE COMBUSTION FURNACE BATCH WASHERS1 – ALLCASE POWER CONVECTION FURNACE1 – IPSEN DRAW & CARBURIZING FURNACE SYSTEM1 – SURFACE COMBUSTION CLOSED LOOP PUSHER TYPE NATURAL GAS

FIRED CARBURIZING FURNACE (Not In Service)2 – STANDARD FUEL ENGINEERING WALKING BEAM THRU-FEED HEAT TREAT

FURNACES

CAPACITIVE DISCHARGE WELDING2 – PROCESS EQUIPMENT CO. 40 KWS CAPACITIVE DISCHARGE WELD-

ING MACHINES, S/Ns 949272-007 & 949272-006 (1994), Schlemmer SpezialWelding Press, Auto Load/ Unload, Xycom Programmable Operator’s Control,Main PLC Control Panel

LASER WELDING2 – SPECTRA-PHYSICS LASER WELDING CELLS, With (1)

Spectra-Physics Model 975 Laser Head, S/N 82021-032, (2)Spectra-Physics Laser Welding Press Frame Assemblies, AutoLoad / Unload, Operator’s Control Panels, (1) Main Control Panel

(44) OIL MIST COLLECTORS / AIR SCRUBBERS / DUST COLLECTORS22 – MONROE ENVIRONMENTAL CORP 3000 TO 25000 CFM OIL

MIST COLLECTORS, Free Standing, 5-HP to 50 HP1 – T.M.I. CENTRAL OIL MIST COLLECTOR, S/N 932003 (2000),

Rated Air Volume 4000 C.F.M., Stainless Steel Construction, FloorStanding, (3) Magnehelic Indicator Gauges

4 – HELICAL DYNAMICS “HELI-FLO” OIL MIST COLLECTORS, Floor Standing, Stainless Steel Construction

1 – TORIT DONALDSON 2DF-16 DOWN FLO DUST COLLECTOR, S/N 229324, Floor Standing, Negative Air Draw With Remote 25-HP Blower, Pneumatic Pulse-Jet Self-Cleaning

4 – TORIT DONALDSON DRY FLO MIST COLLECTORS, FreeStanding

1 – TORIT DONALDSON DRY FLO DMC-4 AIR FILTRATION FILTER, S/N IG388407, Free Standing, HEPA Filter, (2) Photohelic IndicatorGauges

1 – AERCOLOGY MIST COLLECTOR, Floor Standing1 – HENRY FILTERS 20-B.O.S. CENTRAL OIL MIST COLLECTOR

FILTER & 40-B.O.S. AIR SCRUBBER SOLUTION FILTER SYSTEM3 – DEVANSCO CENTRAL AIR SCRUBBER / OIL MIST COLLECTORS2 – CENTRAL AIR SCRUBBER / OIL MIST COLLECTORS, Drag-Out Tank4 – VENTURMATION CENTRAL AIR SCRUBBER / OIL MIST

COLLECTORS

DUST COLLECTION SYSTEMS2 – DCE VOKES DALAMATIC DUST COLLECTION SYSTEMS,

Negative Air Draw, 75-HP Blower, (2) Model DLM – 3/6/10 DustCollector Baghouses, S/Ns 81-1110/4 & 81-1110/1, PneumaticPulse-Jet Cleaning, Bottom Screw Auger Discharge With RotaryAirlock Valve

(33) COOLANT FILTRATION SYSTEMS23 – HENRY FILTERS PROCESS COOLANT FILTRATION & RECIR-

CULATION SYSTEMS, (3) Centralized1 – HYDROMATION HV-5 HYDRO-VAC PROCESS COOLANT

FILTER SYSTEM4 – KALCON MONLAN SYSTEM PROCESS COOLANT

FILTRATION & RECIRCULATION SYSTEMS4 – FRENCH SYSTEMS PROCESS COOLANT FILTRATION &

RECIRCULATION SYSTEMS1 – GRA-PAR PROCESS COOLANT FILTRATION SYSTEM

(40) THRU FEED PARTS WASHERS2 – RANSOHOFF CONVEYORIZED THRU-FEED WASH-

ERS, 36” Wide x 14’ Length & 32” Wide x 20’ Length5 – GRA-PAR CONVEYORIZED THRU-FEED WASHERS,

12’ to 20’ Length1 – INDUSTRIAL METAL FABRICATORS THRU-FEED

PARTS WASHER, 42” Wide x 20’ Length4 – CENTRI-SPRAY THRU-FEED WASHERS, 18’ Length,

Blow-Off, Dept. 36 Turbine Shaft17 – RANSOHOFF THRU-FEED WASHERS, 8’ to 20’ Length2 – GRA-PAR DRIVE/DRIVEN GEARS HORSESHOE THRU-

FEED WASHERS1 – THRU-FEED WASHER, Ambient Wash Temperature,

(2) 4” Wide Thru-Feed Conveyor Lanes, 10’ Length1 – ALLIANCE AQUAMASTER CB-2400 THRU-FEED

WASHER, S/N 053-0697 (1997), 2-Lane ConveyorizedThru Feed, 20” Overall Opening Width, Ambient Wash

7 – INDUSTRIAL METAL FABRICATORS THRU-FEEDWASHERS, 20’ to 28’ Length

CHIP PROCESSING1 – CHIP PROCESSING SYSTEM, Including: (1) Feed

Hopper/Conveyor, 5’ x 6’ Open Top Hopper, 36” WideMetal Belt Chain Conveyor, (1) American Pulverizer ModelT.R.S. Size 36 x 25 Twin Horizontal Shaft Shredder, Etc.

1 – PLANT 5 BAR MACHINE DEPARTMENT CONTROLCHIP PROCESSING SYSTEM, Including: (1) French FilterSystem With Conveyor, System Capacity 10,000 Gallons

1 – FRENCH SYSTEMS 4116 PLANT 10 CHIPPROCESSING SYSTEM, Designed & Built For BuickMotor Div. G.M.C. Flint, Michigan

(24) AUTO GEAR INSPECTION MACHINES24 – ITW 2822-96, 2822-97 & ILLITRON ROTARY

AUTOMATIC GEAR INSPECTION MACHINES

IN-PROCESS CHECKING & GAUGING EQUIP.2 – AIR GAGE 2-STATION COMPUTERIZED GEAR

CHECKING MACHINES1 – IN-PROCESS VERIFICATION/CHECK GAGE STAND2 – FEDERAL AUTOMATIC IN-LINE PARTS CHECKERS1 – AUTOMATIC VISION INSPECTION MACHINE2 – B&K SPECIAL BUILT 4-STATION SUN-GEAR BODY

AUTOMATIC INSPECTION MACHINES1 – DEARBORN PRECISION GAGE AUTOMATIC GEAR

HOB INSPECTION MACHINE1 – K-J LAW 2-STAND IN-PROCESS SPLINE HARD-

NESS CHECK STATION2 – K-J LAW VERIMATION IN-PROCESS AUTOMATIC

FINAL CHECKING GAGES2 – K-J LAW VERIMATION IN-PROCESS CHECK STANDS

PLEASE NOTE: MLC FLINT SALE #2 - JANUARY 18TH PLEASE CHECK WWW.HILCOIND.COM FOR DETAILS

ASSEMBLY STATIONS • INSPECTION • BALERS • MATERIAL HANDLING

For more information, please visit us on the web at www.hilcoind.com 7

CARPENTER SHOP WOODWORKING MACHINERY2 – POWERMATIC 34” & ROCKWELL 14” VERTICAL BANDSAWS2 – ROCKWELL 16” & 10” TABLE SAWS1 – DEWALT 3521 TYPE 1 14” RADIAL ARM SAW1 – STATE D-30 30” DISC SANDER1 – ROCKWELL INVICTA RC-63 24” THICKNESS PLANER1 – INVICTA RJ42 16” EDGE JOINTER1 – DELTA 20 20” FLOOR TYPE DRILL PRESS1 – OLIVER 159-A 12” X 36” LATHE4 – JET & DELTA PORTABLE DUST COLLECTORS1 – AMERICAN LIFTS 2000-LB. HYDRAULIC SCISSOR LIFT TABLE

WELDING EQUIPMENT5 – MILLER ARC WELDING POWER SOURCES1 – LINCOLN IDEALARC WELDING POWER SUPPLY1 – HOBART MEGA-MIG 450 WELDING POWER SUPPLY1 – LINCOLN SQUARE WAVE TIG-355 AC / DC ARC WELDING

POWER SUPPLY1 – THERMAL DYNAMICS THERMAL ARC PAK 7XR PLASMA

CUTTING SYSTEM1 – FEDERAL TYPE SPECIAL PA-3-12 250 KVA PRESS TYPE

SPOT WELDER1 – MILLER MPS-20 AFT ROCKER ARM RESISTANCE SPOT WELDER

MATERIAL HANDLING2 – BELLHEIMER METALLWERK / REMSTAR TYPE SYSTEM

501-2914-14 VERTICAL CAROUSEL STORAGE &RETRIEVAL SYSTEMS, S/Ns 194/51049, N/A, 12905 Kg Max.Total Load, 445 Kg Load Per Carrier, 58 Total Carrier Shelves,98” Wide Shelves, 22’ Height, Programmable Control

1 – DENWAY AUTOMATED STORAGE & RETRIEVAL SYSTEM, 3-Rows Storage Units, (2) Single Sided, (1) Double Sided, Approx.22’ Height x 75’ Length, Overhead Retrieval Crane System

5 – ABELL HOWE & GORBEL 1/4-TON TO 1-TON CAPACITY 360DEGREE FLOOR STANDING JIB CRANES

1 – ABELL HOWE 1/2-TON CAPACITY PORTABLE A-FRAME GANTRY1 – SPANMASTER 1/2-TON CAPACITY BOTTOM RUNNING

BRIDGE CRANE1 – ARO 1/2-TON CAPACITY PNEUMATIC CHAIN HOIST

BALERS1 – GALBREATH HD2200-3060 VERTICAL HYDRAULIC BALER,

S/N WVB0245-7931 (2002), Chamber Size 30’’ x 60’’,Compresion Force Rating 62200-Lbs, Top Mounted HydraulicFloor Standing

2 – PIQUA VERTICAL HYDRAULIC BALERS

SHOP & FACTORY EQUIPMENT1 – MOHAWK SYSTEM IA 9000-LB. 2-POST AUTOMOTIVE

SERVICE LIFT1 – LIBERTY SERIES 500 “PLUS” PALLET WRAP MACHINE1 – OTC 4400-LB. PORTABLE HYDRAULIC SHOP CRANE1 – NIAGARA NO 172 MOTORIZED SHEET METAL EDGER1 – ELECTRO-MATIC BELT-TYPE THRU-FEED DEMAGNETIZER1 – HYDRAULIC SERVICE ELEVATOR, 3-Story Height Cap.

BALANCERS2 – BALANCE ENGINEERING 5-STATION AUTOMATIC

BALANCING MACHINES3 – BALANCE ENGINEERING AUTOMATIC INPUT

CARRIER BALANCERS2 – BALANCE ENGINEERING HAND BALANCERS

AUTOMATED ASSEMBLY STATIONS6 – GIDDINGS & LEWIS GILMAN TRANSFERLINE

28 STATION IN-LINE AUTOMATED TRANSFERASSEMBLY MACHINES

8 – REHNBERG – JACOBSON NEEDLE BEARING ASSEMBLY MACHINES

1 – B&K SPECIAL INPUT & REACTION CARRIERASSEMBLY MACHINE

Inspect Video Final Inspection Stand, Veit Tool & Gage Sorter

PARTS FEEDER HOPPERS2 – DYNAMIC CONTROLS FEED HOPPER3 – INPUT PINION PARTS FEEDERS3 – AURORA FEEDER HOPPERS

FLYWHEEL DEPARTMENT WELDING,BALANCING, ETC.5 – BALANCE ENGINEERING FLYWHEEL BALANCERS1 – WRIGHT K SPECIAL BUILT FLYWHEEL HEAT

SHRINK-FIT MACHINE2 – NOVI PRECISION PRODUCTS SPECIAL BUILT HEAT

& SHRINK MACHINES1 – B&K SPECIAL 4-SPINDLE DOUBLE-END OPPOSED

HORIZONTAL AUTOMATIC CENTERING / FACINGMACHINE

3 – 14” & 12” FLYWHEEL WELDING MACHINES3 – TORIT DONALDSON PORTABLE WELDING FUME

COLLECTOR / EXHAUSTER2 – GWE ENGINEERING & PRECISION PRESS TYPE

SPOT WELDERS1 – WRIGHT K FLYWHEEL BAR CODE LABEL

APPLICATOR MACHINE1 – CENTRI-MATION 14” X 11” POWER ROLLER

CONVEYOR, S/N NA1 – GIDDINGS & LEWIS GILMAN / GISHOLT VERTICAL

BALANCING MACHINE1 – GISHOLT SINGLE SPINDLE VERTICAL DRILL TYPE

FLYWHEEL BALANCER

MISC PRODUCTION EQUIPMENTB&K Burnishing Press, (6) Burnishing Machines, (2) RollerBumpers, Weld Break Test Fixture, Gear Press Machine,Repair DrillAutomatic Gage Marking Machine, Sleeve PressAssembly Machine, Oil Pump Shaft Spacer Press, GearShaft Final Drive Bushing Assembly Press, Dawg Cutcher In-Line Gage, (6) Automatic Engraving Machines

ABRASIVE SHOT BLAST CLEANING1 – WHEELABRATOR SPIN HANGER TYPE ABRASIVE SHOT BLAST

CLEANING MACHINE, ID 48” x 58” x 78” High, Door Opening 34” x 52”,Manganese Load head, (2) 10-HP Side Mounted Shot Wheels, PneumaticOscillation, Manual Door With Limit Switch, Floor Standing, Shot ReclaimSystem, Self-Contained Dust Collection System, Monorail I Beam Infeed Truck

2 – WHEELABRATOR SPIN HANGER TYPE ABRASIVE SHOT BLASTCLEANING MACHINE, S/Ns 3453 (2007), S/N 300135

3 – WHEELABRATOR TUMBLAST ABRASIVE SHOT BLAST CLEANINGMACHINES, S/Ns A100388, A134235, & NA, Chamber Size 27” Diameter x 36”

1 – TORIT DONALDSON NA DUST COLLECTOR, S/N NA, Free Standing,Pneumatic Pulse Jet Self-Cleaning

2 – WHEELABRATOR THRU-FEED ABRASIVE SHOT BLAST CLEANINGMACHINES, S/Ns A135072 & A135074, Stationary Thru-Feed Parts Track, IDSize 28” x 28” x 68”

1 – WHEELABRATOR AIRBLAST CABINET ABRASIVE BLAST CABINET, 48”x 32”

1 – MAC BLAST 5-42024BL ABRASIVE DRY BLAST CABINET1 – GUYSON DBH6 BEAD BLASTER ABRASIVE BLAST CABINET1 – TRINCO 36/4 OOPT DRY BLAST 36” ABRASIVE BLAST CABINET

ABRASIVE CUT-OFF SAWS2 – STONE RS1010 ABRASIVE CUT-OFF SAWS1 – LINCOLN PARK 12” ABRASIVE CUT-OFF SAW1 – CINCINNATI ELECTRIC TOOL 14” & 16” ABRASIVE CUT-OFF SAWS2 – RADIAC 12” & 14” ABRASIVE CUT-OFF SAWS

INSPECTION2 – ZEISS UMC-850 BRIDGE TYPE COORDINATE MEASURING MACHINES,

S/Ns 77887 & 74118, Granite Table Size 46’’ x 84’’, Z-600MM, Y-1200MM,Operator’s Joystick Control Pendant, Conputer Control Desk, Calypso Version3.5 Operating Software w/Zeiss Model RT-50 11 1/2’’ 4th Axis Servo Rotary Table

1 – MITUTOYO FN503 BRIDGE TYPE COORDINATE MEASURING MACHINE,S/N NA, 24” x 18” Granite Work Table, With RAM Optical Video Probe,Mitutoyo CMMC-1S Control Module, Renishaw PHC9 Mk 2 Probe HeadControl Unit, Operator’s Joystick Pendant

1 – MAGNAFLUX DR-523 MAGNETIC PARTICLE INSPECTION MACHINE, S/N812012, Black Light Power Supply, Water Wash, Demagnetizer

2 – SCHERR TUMICO 22-2500 30” OPTICAL COMPARATORS4 – OPTICAL GAGING PRODUCTS 30” & 20” OPTICAL COMPARATORS1 – FEDERAL FORMSCAN 3000 ROUNDNESS CHECKER1 – PRATT & WHITNEY LASERULER BRIDGE TYPE MEASURING MACHINE1 – SIP 302M PRECISION HORIZONTAL BENCH MICROMETER2 – ZYGO 1200 PROGRAMMABLE BENCH MICROMETERS1 – FEDERAL SURFANALYZER MOTORIZED HEIGHT STAND2 – PMC CONTOUR READER SURFACE / ROUNDNESS CHECKERS3 – GRANITE SURFACE PLATES, 48” X 96” X 12” 4-Ledge, 36” X 72” X 12”, 36”

X 72” X 12”2 – BROWN & SHARPE MICRO HITE 36” & 24” PROGRAMMABLE HEIGHT GAUGES1 – SUNDSTRAND OPTICAL CUTTER INSPECTION MACHINE1 – GILDEMEISTER-DEVLIEG MICROSET EGH-3050 OPTICAL TOOL PRESETTER

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 100

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco Trading, LLC • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved Printed in USA • MOTO3493 • IL License #444000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX)Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • Phoenix • San Francisco • Toronto • Villahermosa (MX)

HILCO WEBCAST/ONSITE AUCTION

FollowUs on:

Terms of SaleA buyer’s premium of 13.5% for onsite sales & 16% for webcast sales is in effect. Everything will be sold to thehighest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted on the premises of the sale and subject toadditional terms announced the day of sale. All items willbe sold “as is, where-is” without any warranties, expressor implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guaranteeto the accuracy of the information herein contained.Bidders are encouraged to thoroughly inspect the itemson which they intend to bid prior to sale. Absolutely noitems will be removed until the day after the conclusion ofthe sale and payment is made in full. Subject to additions,deletions and prior sale.

Payment: ALL PURCHASES MUST BE PAID IN FULL ONTHE DAY OF THE AUCTION. If you intend to pay by wiretransfer, we will accept payment the day after the saleONLY IF a deposit of 25% of total purchases is made onthe day of the sale. Contact our office for wire transferinstructions. Only cash, wire transfer or certified check,payable to Maynards will be accepted. Company checkspayable to Maynards will be accepted only if accompanied by a bank letter of guarantee, (see sampleletter below). All sales are subject to sales tax. Purchasersclaiming exemptions from taxes must provide proof satisfactory to the Auctioneer of their entitlement to claimsuch exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees payment toMaynards from (Company Name). This guarantee willbe valid for purchases made at the Auction of Motors Liquidation Company Flint Powertrain onDecember 8th & 9th.

FLINT POWERTRAIN NORTH