Online auc on ﬁsh and meat processing machinery in Urk (NL) · 150 mm, total dimensions: 2500 mm x 600 mm x 870 mm. 250 19 Meca Plas c Meca Plas c traysealer, type: MECA 3000, number:

Online auc�on fish and meat processing machinery inUrk (NL)

Closing: 09 May 2018 from 14:00 hrs.

Viewing day:07 May 2018 from 09:00 �ll 13:00 hrs.

Address:Hoornse Hop 68321 WX UrkNetherlands

General terms and condi�ons of the online auc�on

Closing date 09 May 2018 from 14:00 hrs. Viewing 07 May 2018 from 09:00 �ll 13:00 hrs.Organizing Company Industrial Auc�ons BV

Looyenbeemd 115652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208Fax: +31 (0)40 2409 209E-mail: info@industrial-auc�ons.com

Buyers premium 16% over the highest bidV.A.T 21% over the highest bid including PremiumPickup date 17 May 2018 from 09:00 �ll 16:00 hrs.Pickup address Hoornse Hop 6

8321 WX UrkNetherlands

Delivery instruc�ons The buyer is fully responsible for the dismantling, loading andtransporta�on of the bought lots. Industrial Auc�ons B.V. cannot acceptany responsibility unless indicated otherwise. The delivery (pick-upbought lots) will only take place on the men�oned delivery date/�me andaddress.

Payment details Before collec�on of the goods your payment has to be fulfilled. It ispossible to transfer the amount due to our account with ING-bank,account number 005033999 in Best, IBAN: NL34INGB0005033999, BIC:INGBNL2A or to our account at Rabobank, account number 157198367 inBest, IBAN: NL80RABO0157198367, BIC: RABONL2U, Gladbacher Bank AG,Iban: DE83310601818887176010, BIC: GENODED1GBM, indica�nginvoice- and customernumber.

General terms andcondi�ons of sale

On the auc�on general terms and condi�ons of the online auc�on areapplicable concerning the (possible) purchase of moveable assets,furthermore these specific terms and condi�ons.

Combina�ons All lots in a combina�on will be sold individually first. The star�ng bid ofthe combina�on is the total amount of the individual bids. Thecombina�on will open a�er all individual lots are closed. If thecombina�on is sold it overrules the individual bids, if not the individualbids are applicable.

Prolonga�on If a bid is made in the last 5 minutes the lot closes, the closing �me of thatlot will be extended with 5 minutes un�l no bids are made.

www.industrial-auc�ons.com

mailto:[email protected]

Nr Title Descrip�on Start €

1 Carnitech Carnitech vision slicer, type: IPS 3000, serial number: 9337,year of construc�on: 2008, 3 x 400 V, 3 Ph, 50/60 Hz, 16 A, 6- 8 bar, plas�c infeed belt, belt width: 278 mm, knife width:225 mm, plas�c ou�eed belt, belt width: 202 mm, totaldimensions: 3650 mm x 1000 mm x 1750 mm.

7500

2 Carnitech Carnitech 90° curve conveyor, type: CR, iden�fica�on:1596000, year of construc�on: 2007, s/s frame, plas�c meshbelt, belt width: 300 mm, total dimensions: 1600 mm x 1350mm x 1000 mm.

500

3 NN roller conveyorwith pusher

S/s roller conveyor with pusher, roll width: 300 mm, widthpusher: 550 mm, total dimensions: 700 mm x 750 mm x1100 mm.

250


7500


500



250


7500


500



250

10 MarpetFabrica�ons

Marpet Fabrica�ons transport belt, serial number: 0344,year of construc�on: 2003, 240 V, 3 Ph, 0.15 kW, s/s frame,plas�c belt, belt width: 300 mm, total dimensions: 5115 mmx 500 mm x 920 mm.

500

11 Ishida Ishida checkweigher with rejector, model: DACS-W-012-SB-SS-I-N, serial number: 562477, year of construc�on: 2012,240 V, 1 Ph, 50 Hz, 2 A, weighing range: 0 - 1200 gram,plas�c belt, belt width: 218 mm, last calibra�on: 2015, totaldimensions: 1500 mm x 700 mm x 1450 mm.

5000


12 Scanvaegt Turn table with 4 Scanvaegt weighing scales, diameter table:1500 mm, height table: 820 mm, indicator type: 411, serialnumber: BPE 03891 D, load receptor, type: 1025.15.03,serial number: BPE 03891, maximum: 3 kg, minimum: 0.02kg, e = 0.001 kg, dimensions scale: (4x) 300 mm x 200 mm,total dimensions: 2400 mm x 2400 mm x 1200 mm. Missing3 indicators.

500

13 Seydelmann Seydelmann grinder with li�er for 200 liter meat bins, type:AG 160 T B 80 054-1, plate diameter: 160 mm, totaldimensions: 3100 mm x 1700 mm x 1500 mm. Missingou�eed screw, knifes and plates.

2500

14 Scanvaegt Scanvaegt transport belt, type number: ACC CONV.4707.275.08, serial number: BPU 00539, year ofconstruc�on: 2007, 3 x 230 V, 1 Ph, 50/60 Hz, 1.9 A, weight:85 kg, plas�c belt, belt width: 277 mm, total dimensions:800 mm x 600 mm x 960 mm.

250

15 Hillerslev Hillerslev transport belt, year of construc�on: 2007, s/sframe, plas�c mesh belt, belt width: 290 mm, totaldimensions: 800 mm x 500 mm x 1000 mm.

250

16 Carnitech Carnitech transport belt, type: SB45, iden�fica�on:1596000, year of construc�on: 2007, s/s frame, plas�c belt,belt width: 300 mm, total dimensions: 1100 mm x 700 mm x1220 mm.

250

17 Inauen MaschinenAG / VC 999

Inauen Maschinen AG / VC 999 skinpacker, type: VC 999 / RSCompact , machine number: 4406032, 400 V, 3 Ph, 50 Hz, 7kW, 6 - 8 bar, hard film, film width: 322 mm, so� film, filmwidth: 322, dye: (2x) 225 mm x 116 mm, total dimensions:3400 mm x 800 mm x 1900 mm. Plas�c cover broken.Without vacuum pump.

7500

18 NN transport belt Transport belt, s/s frame, plas�c mesh belt, belt width: (2x)150 mm, total dimensions: 2500 mm x 600 mm x 870 mm.

250

19 Meca Plas�c Meca Plas�c traysealer, type: MECA 3000, number: D1101,year of construc�on: 1999, ou�eed roller conveyor, rollwidth: 470 mm, total dimensions: 3650 mm x 1000 mm x2100 mm. Incomplete. Without dye.

1000

20 Itec Itec hygiene sta�on with sole cleaner, handdisinfec�on unitwith turn s�le, type: 23881, series: 0431, year ofconstruc�on: 2007, 400 V, 3 Ph, 50 Hz, 0.8 kW, sensorcontrol, brush length: (2x) 1600 mm, total dimensions: 3000mm x 950 mm x 1900 mm.

3000


21 Meca Plas�c Meca Plas�c traysealer, type: S4000DP, number: 6744, yearof construc�on: 2009, plas�c infeed roller conveyor, rollwidth: 650 mm, film width: 455 mm, dye: (3x) 155 mm x 117mm, plas�c mesh ou�eed conveyor, belt width: 530 mm,Bein Helmut GmbH thermal transfer printer, type: Intern DPFuturo I+107, serial number: 1608, year of construc�on:2009, 230 V, 50/60 Hz, 1.5 A, total dimensions traysealer:5800 mm x 1200 mm x 2550 mm, DTE water chiller, type:K-003.6, manufacturing number: D0757-D0916703, year ofconstruc�on: 2009, refrigerant: R407C, 1.1 kg, dimensionswater chiller: 550 mm x 570 mm x 470 mm.

2500

22 Cryovac Cryovac dip tank, model: ST12 RHS, serial number:A51500208, year of construc�on: 1999, 380/415 V 50 Hz, 16A, 4 kW, 6 bar, s/s mesh belt, belt width: 600 mm, clearance:700 mm x 300 mm, total dimensions: 1300 mm x 1200 mm x1560 mm. Incomplete.

500

23 Cryovac/Old Rivers Cryovac/Old Rivers rotary vacuum packaging machine,model: 8310-140, serial number: G-1906, 440 V, 3 Ph, 50 Hz,11/20 A, 5 vacuum units, seal length: 420 mm, totaldimensions: 3100 mm x 2200 mm x 1450 mm, includingsteel frame with 2 Busch vacuum pumps, dimensions: 1000mm x 1000 mm x 1300 mm.

2500

24 NN eleva�ng belt Eleva�ng belt with dividers, s/s frame, plas�c mesh belt withdividers, belt width: 400 mm, divider height: 25 mm,distance between dividers: 95 mm, eleva�ng height: 1150mm, total dimensions: 3000 mm x 700 mm x 1250 mm.

500

25 Unikon Unikon washing machine for pallet boxes, type: UNW-3000B, machine number: 080, year of construc�on: 2006, 400 V,3 Ph, 125 A, weight: 1100 kg, pump/blower: 22/15 kW, driveunit: 0.55/0.32/0.32 kW, electric heated: 3 x 15 kW, plas�cchains, distance between chains: 540 mm, clearance: 1050mm x 1250 mm, inspec�on �ll: 06-2018, total dimensions:10000 mm x 4000 mm x 2800 mm, including blower on s/sframe, dimensions: 1400 mm x 800 mm x 700 mm andpallet with s/s pipings.

7500

26 Wol�ing Wol�ing micro cu�er, type: E.160-MAN, number: 60687,year of construc�on: 1999, 400 V, 50 Hz, 94 A, 55 kW,emulsifying of meat pre-blends down to -2°C, totaldimensions: 2300 mm x 1500 mm x 2200 mm. Completelyoverhauled.

10000

27 Kilia Kilia mixer-grinder, type: Winkel-AW D114 2000 S, machinenumber: 59613705, 400 V, 50 Hz, 32 A, 13.0 kW, platediameter: 114 mm, total dimensions: 1300 mm x 1100 mm x1500 mm.

5000


28 Günther Günther freeze and coa�ng unit, type: GPC 4000 C N2,machine number: 26615, year of construc�on: 2001,capacity: 1500 liter, 400 V, 32 A, 20 kW, 6 bar, 4000 liter perminute, dimensions: 4500 mm x 2600 mm x 2700 mm,dimensions compressor cabinet: 750 mm x 700 mm x 780mm.

5000

29 Turbo Systems Ltd Turbo Systems Ltd mobile frame for mixer, dimensions: 850mm x 1100 mm x 2450 mm.

500

30 Vemag Vemag vacuum filling machine with li�er for 200 liter meatbins, model: DP 10, type: 150/250 8, machine number: 1500 119, 400 V, 50 Hz, 9 kW, total dimensions: 2500 mm x1250 mm x 2050 mm. Completely overhauled in 2015.

10000

31 Seydelmann Seydelmann cu�er with li�er for 200 liter meat bins, type:K206 U 85092-1, machine number: 11015020085, year ofconstruc�on: 1992, 96 kW, s/s bowl and knifes, volume: 200liter, dimensions cu�er: 3100 mm x 2400 mm x 2000 mm,dimensions switch cabinet: 1000 mm x 350 mm x 1800 mm.Completely overhauled in 2015.

35000

32 Fomaco Fomaco mobile dry sal�ng machine, model: BAFO 6,machine number: 8849 2002, year of construc�on: 2002, 3 x400 V, 50 Hz, 6.0 A, 6.0 bar, s/s mesh belt, belt width: 700mm, clearance: 800 mm x 200 mm, total dimensions: 4100mm x 1300 mm x 2100 mm. Wheels are damaged.

2500

33 SchröderMaschinenbauGmbH

Schröder Maschinenbau GmbH injector, type: N180 FIF,number: N180 112 00, year of construc�on: 2000, 400 V, 50Hz, 27 A, 14 kW, 6 bar, 180 needles, walking beam, beamwidth: 620 mm, clearance: 620 mm x 190 mm, dimensionsinjector: 2000 mm x 1700 mm x 2500 mm, SchröderMaschinenbau GmbH filter tub with 2 membrane pumps,dimensions filter tub: 1850 mm x 1000 mm x 850 mm.

3000

34 Baader Baader trimming machine for salmon and sea trout, type:988 L, project number: 101928, year of construc�on: 2004,415 V, 3 Ph, 50 Hz, 26 A, belt width: (2x) 300 mm, totaldimensions: 3400 mm x 1550 mm x 2080 mm.

5000

35 Kramer + Grebe Kramer + Grebe double sha� paddle mixer-grinder, type:TMG, machine number: 371/0110, year of construc�on:1999, 230/400 V, 3 Ph, 50 Hz, 150/200 A, plate diameter:200 mm, total dimensions: 2350 mm x 2200 mm x 2700mm.

25000

36 Gernal Gernal cooking vessel with agitator and outlet, type: KK-S-R-600, serial number: 98/00891, volume: 600 liter, insidedimensions: 1200 mm x 600 mm, ax diameter: 40 mm, totaldimensions: 1500 mm x 1500 mm x 1350 mm. Missingagitator, vessel leak.

1000

37 Sepama�c Sepama�c separator, type: DMS 400, machine number:114018, 400/230 V, 50 Hz, 4 A, drum: 4 mm, totaldimensions: 900 mm x 1700 mm x 2400 mm.

5000


38 Selo BV Selo BV mobile ple�er, type: SM152072, number:SP250VERL., year of construc�on: 1995, 220/380 V, 50 Hz,2.5 A, 0.5 kW, belt width: 255 mm, total dimensions: 1700mm x 700 mm x 1300 mm. Incomplete, missing belts.

500

39 Ampag Ampag mobile strapping machine, type: Rotant 600 SK,machine number: 808.611, year of construc�on: 1986,220/380 V, foot control, dimensions: 1100 mm x 1100 mm x1600 mm.

100

40 Baader Baader fille�ng machine for whitefish, type: Baader 189,number: 10-2069-0189, year of construc�on: 1972, 380 V, 3Ph, 50 Hz, 8 A, double plas�c mesh belt, belt width: (2x) 200mm, total dimensions: 4000 mm x 1100 mm x 2400 mm.

10000

41 Laska Laska grinder, type: WW200G, number: E5720, 3 x 380/400V, 50 Hz, 98 A, 50 kW, plate diameter: 200 mm, dimensionsgrinder: 1650 mm x 1700 mm x 2000 mm, dimensionsswitch cabinet: 1000 mm x 350 mm x 1700 mm. Completelyoverhauled in 2016.

12500

42 Henkovac Henkovac mobile double chamber vacuum machine, type:E-503, seal length: (4x) 850 mm, dimensions chamber: (2x)850 mm x 870 mm, total dimensions: 2050 mm x 1200 mm x1200 mm. Seals are missing. Without vacuum pump.

2500

43 Loma Loma metal detector with rejecter, model: Superscan MicroISC, head serial number: MD-23871, year of construc�on:1995, 220 V, 50 Hz, 2 A, coil gap: 120 mm, Rx: 210 mm,clearance: 350 mm x 127 mm, total dimensions: 1580 mm x1160 mm x 1000 mm. Missing belt, screen damaged.

1000

44 MR Mul�vac MR X-ray scanner, clearance: 330 mm x 170 mm,total dimensions: 750 mm x 1000 mm x 2250 mm. Missingbelt.

1000

45 Sepama�c Sepama�c separator, type: SEPA 1200, machine number:195519, 400 V, 50 Hz, 15 A, 7.5 kW, 24 V, drum: 4 mm,dimensions: 1600 mm x 1200 mm x 1850 mm

5000

46 Baader Baader separator, type: 699 SC, machine number:12-4526-0699, year of construc�on: 1991, 380 V, 3 Ph, 50Hz, 15.0 A, drum: 5 mm and 8 mm, dimensions separator:1500 mm x 1600 mm x 1500 mm, dimensions tool trolley:2300 mm x 600 mm x 1850 mm.

5000

47 Simo Simo process pump, s/s screw, dimensions hopper: 770 mmx 1000 mm x 550 mm, total dimensions: 1950 mm x 1400mm x 1350 mm.

2500

48 Seydelmann Seydelmann cu�er, machine type: K60DC8, machinenumber: 02503-1, year of construc�on: 2001, 400 V, 50 Hz,91 A, 43 kW, s/s bowl and knifes, volume: 60 liter,dimensions cu�er: 1250 mm x 1100 mm x 1100 mm,dimensions switch cabinet: 800 mm x 1000 mm x 330 mm.

10000

49 Van de Vecht Van de Vecht crate washer, dimensions: 850 mm x 1260 mmx 1700 mm. Defect.

1500


50 Poly-Clip SystemsGmbH & Co. KG

Poly-Clip Systems GmbH & Co. KG mobile double clipper,type: DFC 8162, number: 51159, 380 V, 50 Hz, 6 A, 5-7 bar,belt width: 190 mm, total dimensions: 2400 mm x 850 mm x2000 mm.

2500

51 NN mixing tank Tank with agitator, volume: 850 liter, dimensions tank: 1400mm x 1400 mm x 2500 mm.

2500

52 NN mixing tank Tank with agitator, volume: 850 liter, dimensions: 1400 mmx 1400 mm x 2500 mm, including control panel, dimensions:750 mm x 750 mm x 300 mm.

2500

53 Fomaco Fomaco brine mixer, model: FBM 500, machine number:9822-2004, 3x 400 V, 50 Hz, 9.0/25 A, mixing capacity: 500liter, hopper capacity: 40 liter, Inoxpa pump, type: SE-26E,number: 249336 A, year of construc�on: 2004, totaldimensions: 1700 mm x 1200 mm x 2200 mm. Cover forpump is missing.

2500

54 Ilpra Ilpra traysealer, serie: Foodpack, model: Speedy MEC V/G,serial number: FP 8795, year of construc�on: 2010, 400 V,film width: 640 mm, dye: (3x) 118 mm x 118 mm, Buschvacuum pump, total dimensions: 3600 mm x 1150 mm x1630 mm. Including pallet with various dyes, dimensions:(4x) 95 mm x 127 mm, (3x) 178 mm x 140 mm, (4x) 118 mmx 118 mm.

7500

55 NN roller conveyor S/s roller conveyor, roll width: 550 mm, total dimensions:1000 mm x 650 mm x 450 mm.

250

56 NN couplings S/s trolley with various couplings and parts, dimensionstrolley: 1050 mm x 900 mm x 1000 mm.

100

57 Baader Baader mobile heading machine for salmon and sea trout,type: 434, serial number: 4346700341, working range: 2 �ll7 kg, throughput rate: up to 42 fish per minute, dimensions:3650 mm x 2100 mm x 2150 mm.

10000

58 Espera Espera label printer, type: ESD 103, number: 51 12 6812,230 V, 50-60 Hz, 1 A, dimensions: 2200 mm x 500 mm x 250mm.

25

59 Maja Maja por�oning machine, type: FP 100, number: 45948,year of construc�on: 2006, 400 V, 3 Ph, 50 Hz, 29 A, 19 kW,dimensions: 1900 mm x 1000 mm x 1900 mm, Maja rejecter,type: MA 2, number: 46184, year of construc�on: 2006, 24V, 1.0 A, belt width: 160 mm, dimensions: 2000 mm x 1300mm x 1550 mm, 2 tool trolleys with parts, dimensionstrolley: (2x) 1000 mm x 800 mm x 1200 mm.

2500

60 Townsend Townsend mobile injector, model: 1450, serial number: 410,year of construc�on: 1996, 380 V, 50 Hz, 3 Ph, 2.5-7.6 A,plas�c mesh belt, infeed belt width: 360 mm, clearance: 350mm x 150 mm, 185 needles, ou�eed belt width: 700 mm,total dimensions: 4200 mm x 1100 mm x 1650 mm.

2500


61 Marel / AEWDelford

Marel / AEW Delford weighing and labelling machine,model: 9000, serial number: 96113, year of construc�on:2011, maximum: 3000 gram, minimum: 40 gram, e= 1/2gram, T= 450 gram, belt speed: 5 meter per second,temperature range: 0° �ll 35° Celsius, maximum airpressure: 0.6 Mpa, 230 V, 50 Hz, dimensions: 1850 mm x600 mm x 1770 mm. Missing belts.

2500

62 Dipl.-Ing. Schindler& Wagner GmbH& Co KG

Dipl.-Ing. Schindler & Wagner GmbH & Co KG knifesharpener on steel trolley, type: SPM-SM 480.02.00,number: 2397, year of construc�on: 2007, 400 V, 50 Hz,2000 VA, dimensions: 1350 mm x 650 mm x 1800 mm.

500

63 TVM TVM mobile por�oning machine, type: TVM-Por�o 4000,serial number: 05-00.26725219, year of construc�on: 2000,400 V, 3 Ph, 50 Hz, 8/4 bar, 1200/600 liter air, weight: 380kg, belt width: 180 mm, total dimensions: 2300 mm x 750mm x 2770 mm.

500

64 Scanvaegt Scanvaegt s/s switch cabinet, dimensions: 800 mm x 300mm x 1800 mm.

500

65 NN switch cabinet S/s switch cabinet, dimensions: 800 mm x 460 mm x 1760mm.

1250

66 Dipl.-Ing. Schindler& Wagner GmbH& Co KG

Dipl.-Ing. Schindler & Wagner GmbH & Co KG slicer line,type slicer: SVC 26.627/300, machine number: 2397, serialnumber: 703646, year of construc�on: 2007, 230 V, 50 Hz,24 VDC, air pressure: 6 bar, 180 liter per minute,dimensions: 3000 mm x 2300 mm x 2300 mm, infeedconveyor, s/s frame, plas�c belt, belt width: 300 mm,dimensions: 5400 mm x 1400 mm x 1800 mm, dividing belt,s/s frame and rollers, roller width: 900 mm, dimensions:1800 mm x 1500 mm x 1400 mm, ou�eed wire belt, s/sframe, plas�c wire belt, belt width: 245 mm and 560 mm,dimensions: 5700 mmm x 1700 mm x 1550 mm. Including 2pallets and 1 pallet box with spare parts with among others:3 knifes, plas�c belts, rollers and electronic parts,dimensions: (3x) 1200 mm x 800 mm x 750 mm.

25000

67 NN switch cabinet S/s frame with switch cabinet and display, dimensions: 500mm x 700 mm x 1900 mm.

100

68 Marel Marel ITM fish trimming robot, type: ITM F2, serial number:A045311, year of construc�on: 2007, belt type: voltabelt/ameral k112/Intralox s1100 1g, belt size: variable, 3x 380 V/ 3x 480 V, dimensions: 6100 mm x 1550 mm x 2150 mm.

5000

69 Foss/MeatMaster Foss/MeatMaster mobile X-ray scanner, type: 78010, serialnumber: 520014821, 185-210 / 370-420 VAC, 3 Ph, 50-60Hz, 8/4 A, belt width: 650 mm, clearance: 670 mm x 250mm, dimensions: 3300 mm x 1450 mm x 2750 mm.

10000

70 Carsø & Aaby-StaalA/S

Carsø & Aaby-Staal A/S mobile por�oning machine, type:DL-2002, serial number: 7857-3, year of construc�on: 2003,400 V, 0.23 kW, belt width: 200 mm, clearance: 130 mm x 80mm, total dimensions: 1400 mm x 850 mm x 1350 mm.

2500


71 Melior-Ganda Sprl Melior-Ganda Sprl mixer, model: MG150, machine number:11503, year of construc�on: 2004, 400 V, 50 Hz, 3.6 A, 1.1kW, volume: 150 liter, dimensions: 900 mm x 1200 mm x1350 mm.

1000

72 Vemag Vemag vacuum filing machine with li�er for 200 liter meatbins, model: Robby 2, type: 137, number: 137 0049, year ofconstruc�on: 2004, 400-460 V, 3 Ph, 25/15 A, filling andpor�oning, dimensions: 1500 mm x 1100 mm x 2750 mm.

3000

73 Vemag Vemag vacuum filing machine with li�er for 200 liter meatbins, model: Robby 2, type: 137, number: 137 0072, year ofconstruc�on: 2004, 400-460 V, 3 Ph, 25/15 A, filling andpor�oning, dimensions: 1500 mm x 1100 mm x 2750 mm.

3000

74 Vemag Vemag forming module, model: 891, machine number: 8910155, year of construc�on: 2004, 220-240 V / 400-460 V /575 V, 50/60 Hz, 10 A, dimensions: 700 mm x 300 mm x1500 mm and pallet with Vemag co-extrusion device,model: 893, number: 893.0166, year of construc�on: 2005,220-240 V, 400-460 V, 575 V, 3 Ph, 50/60 Hz, 2/1.2 A, beltwidth: 95 mm.

500

75 Baader Baader mobile skinning machine, type: 51, machinenumber: 10-3466-0051, year of construc�on: 1984, 220/415V, 3 Ph, 50 Hz, 1.5 kW, 4.0 A, belt width: 380 mm, workingwidth: 410 mm, belt width s/s mesh belt: 370 mm, totaldimensions: 2200 mm x 800 mm x 1200 mm.

2500

76 Baader Baader mobile skinning machine, type: 51, machinenumber: 10-3066-0051, year of construc�on: 1989, 220/380V, 3 Ph, 50 Hz, 1.5 kW, 4.0 A, belt width: 375 mm, workingwidth: 410 mm, belt width s/s mesh belt: 370 mm, totaldimensions: 2100 mm x 700 mm x 1150 mm.

2500

77 Baader Baader mobile skinning machine, type: 51, machinenumber: 10 6366 0051, year of construc�on: 1986, 220/380V, 3 Ph, 50 Hz, 1.5 kW, 4.0 A, belt width: 375 mm, workingwidth: 410 mm, belt width s/s mesh belt: 370 mm, totaldimensions: 2100 mm x 700 mm x 1150 mm.

2500

78 NN transport belt Transport belt on s/s frame, belt width: 80 mm, totaldimensions: 800 mm x 700 mm x 1100 mm.

125

79 NN trolley S/s trolley with large amount of filling a�achments,dimensions: 1150 mm x 1000 mm x 1100 mm.

500

80 Vemag Vemag vacuum filling machine with li�er for 200 liter meatbins, model: Robby 2, type: 137, year of construc�on: 2003,15 kW, 25 A, number: 1370011, dimensions: 1800 mm x1250 mm x 1850 mm.

4000

81 Van Leeuwen Van Leeuwen mobile eleva�ng belt, type number: OPVB 01,year of construc�on: 2009, s/s frame, plas�c belt, beltwidth: 400 mm, eleva�ng height: 2000 mm, totaldimensions: 3300 mm x 700 mm x 2150 mm.

250


82 NN eleva�ng belt Eleva�ng belt, s/s frame, plas�c mesh belt with dividers, beltwidth: 460 mm, divider height: 25 mm, distance betweendividers: 250 mm, eleva�ng height: 1100 mm, totaldimensions: 1600 mm x 750 mm x 1220 mm.

250

83 Van Leeuwen Van Leeuwen eleva�ng belt with dividers and infeed hopper,type number: OPVB SPEC 01, year of construc�on: 2009, s/sframe, plas�c mesh belt, belt width: 300 mm, divider height:25 mm, distance between divider: 260 mm, eleva�ngheight: 1800 mm, total dimensions: 2500 mm x 800 mm x1850 mm.

250

84 Nieros Nieros boot cleaner, type: HL-ACR, serial number: N3T43-04,year of construc�on: 2006, 400 V, 3 Ph, 50 Hz, 0.55 kW,brush length: 500 mm and 150 mm, total dimensions: 800mm x 750 mm x 1250 mm.

500

85 Nieros Nieros boot cleaner, type: HL-ACR, serial number: N3T43-03,year of construc�on: 2006, 400 V, 3 Ph, 50 Hz, 0.55 kW,brush length: 500 mm and 150 mm, total dimensions: 800mm x 750 mm x 1250 mm.

500

86 NN work table Work table with 2 pla�orms, s/s frame, 2 plas�c worktops,dimensions: (2x) 1000 mm x 390 mm, total dimensions:2000 mm x 1000 mm x 1090 mm.

250

87 Meyn Meyn mobile breading machine, machine number: 706960,year of construc�on: 2000, s/s mesh belt, belt width: 600mm, s/s screw, screw width: 150 mm, total dimensions:3000 mm x 1200 mm x 1850 mm.

5000

88 Koppens Koppens mobile preduster, type: PRM600MEG, machinenumber: 1317, year of construc�on: 1997, 400 V, 3 Ph, 50Hz, 15.18 A, 4.42 kW, s/s mesh belt, belt width: 600 mm,total dimensions: 3700 mm x 1200 mm x 1750 mm.

10000

89 NN eleva�ng belt Mobile eleva�ng belt, s/s frame, plas�c belt, belt width: 400mm, eleva�ng height: 950 mm, total dimensions: 2000 mmx 700 mm x 1000 mm.

250

90 NN eleva�ng belt Eleva�ng belt with infeed hopper, s/s frame, plas�c meshbelt, belt width: 300 mm, eleva�ng height: 1650 mm, totaldimensions: 3200 mm x 700 mm x 1750 mm.

250

91 NN eleva�ng belt Mobile eleva�ng belt, s/s frame, plas�c belt, belt width: 400mm, eleva�ng height: 950 mm, including frame for crates,dimensions frame: 570 mm x 370 mm, total dimensions:2300 mm x 900 mm x 1000 mm.

250

92 FAM FAM mobile eleva�ng belt with dividers, type: 41-95-101,fabrica�on number: 002071, s/s frame, plas�c belt withdividers, belt width: 300 mm, divider height: 54 mm,eleva�ng height: 1550 mm, distance between dividers: 300mm, total dimensions: 1300 mm x 500 mm x 1750 mm.

100

93 AEW AEW bandsaw, machine: 350, serial number: L.H.168097,415 V, 3 Ph, 50 Hz, 3.45 A, weight: 142 kg, dimensions table:800 mm x 660 mm, total dimensions: 1000 mm x 900 mm x1950 mm.

500


94 VSD VSD ham press including 3 moulds, diameter moulds: 70mm, 80 mm and 110 mm, total dimensions: 1850 mm x 500mm x 1450 mm.

1000

95 NN ham press Mobile ham press, dimensions: 2100 mm x 500 mm x 1900mm. Incomplete.

500

96 Zebra/ArcaE�che�e SPA

Zebra/Arca E�che�e Spa mobile label printer, model: 110PAX4 ᵀᴹ, serial number: 04J113900013, 100-240 V, 4 A,47-63 Hz, dimensions labels: 95 mm x 65 mm, plas�c meshbelt, belt width: 250 mm, total dimensions: 1500 mm x 1100mm x 1850 mm.

750

97 Koppens Koppens fryer, type: BR1800/400, machine number:BR1800-28, 380 V, 3 Ph, 50 Hz, 55 A, 36 Kva, weight: 450 kg,belt width: 400 mm, total dimensions: 3800 mm x 1000 mmx 1880 mm.

5000

98 Jansen Techniek Jansen Techniek mobile transport belt, model:Separa�eband, type: S550 MiniPitch, year of construc�on:2011, s/s frame, plas�c belt, belt width: 600 mm, totaldimensions: 1500 mm x 1000 mm x 900 mm.

500

99 Talleres RamonS.L.

Talleres Ramon S.L. cu�er, serial: AS, model: 40, fabrica�onnumber: 1050, year of construc�on: 1996, 380 V, 3 Ph, 50Hz, 14.7 A, 5.88 kW, 1500 / 3000 rates per minute, s/s bowland knifes, volume: 40 liter, total dimensions: 1000 mm x1000 mm x 1200 mm.

2500

100 Dibal S.A. Dibal S.A. weighing and labelling machine with bo�om andtop labeller, model: LS 3000, serial number: 21300127, 230V, 50 Hz, 2 A, maximum: 6 kg, minimum: 40 gram, e = 2gram, maximum 80 packages per minute, dimensions labels:95 mm x 65 mm, plas�c belt, belt width: (1x) 280 mm and(2x) 128 mm, total dimensions: 2100 mm x 800 mm x 1800mm.

2500

101 Me�ler Toledo Me�ler Toledo weighing scale for bags, model: PTHN, serialnumber: 118, maximum: 60 kg, minimum: 0.4 kg, e = 20gram, last calibra�on: 2017, total dimensions: 700 mm x 700mm x 1750 mm.

50

102 Me�ler Toledo Me�ler Toledo weighing scale for bags, model: PTHN, serialnumber: 270, maximum: 60 kg, minimum: 0.4 kg, e = 20gram, last calibra�on: 2017, total dimensions: 700 mm x 700mm x 1500 mm.

50

103 Bosgraaf Bosgraaf mobile transport belt, type: conveyor, number:93013-2, year of construc�on: 2009, s/s frame, plas�c meshbelt, belt width: 450 mm, total dimensions: 3450 mm x 800mm x 1650 mm. Switch cabinet is missing control panel.

250

104 Ditsch Ditsch belt grill, 230/400 V, clearance: 700 mm x 70 mm,mesh belt, belt width: 690 mm, total dimensions: 850 mm x850 mmm x 800 mm. Technical unknown.

100

105 Automac S.p.A. Automac S.p.A. mobile packaging machine, model: B-206,serial number: 3-5565, year of construc�on: 2000, 230 V, 2Ph, 50/60 Hz, belt width: 260 mm, total dimensions: 1150mm x 1100 mm x 1350 mm.

1000


106 Schmidt-TransportanlagenGmbH

Schmidt-Transportanlagen GmbH mobile dividing belt,number: 5667, year of construc�on: 2003, s/s rollers, rollerwidth: 770 mm, plas�c dividers, width dividers: 110 mm,belt width plas�c belts: (9x) 60 mm, total dimensions: 1750mm x 1450 mm x 1130 mm. Incomplete, technical condi�onunknown.

200

107 FortressTechnology

Fortress Technology mobile metal detector head, model:Phantom, clearance: 495 mm x 145 mm, calibrated �ll09-2017, total dimensions: 600 mm x 900 mm x 1000 mm.

1500

108 Dexion EurotecGroup

Dexion Eurotec Group freezer, model: 70 TNH, serialnumber: 358003, year of construc�on: 2009, 230 V, 1 Ph, 50Hz, volume: 569 dm³, refrigerant: R404A, 230 gram, 3 floors,dimensions: 700 mm x 800 mm x 2000 mm.

500

109 Koppens Koppens mobile breading machine, type: EPR 600-C,machine number: PR 600-C-02, 380 V, 3 Ph, 50 Hz, 1.09 kW,3.5 A, weight: 200 kg, belt width: 600 mm, total dimensions:1800 mm x 1000 mm x 1800 mm.

2000

110 Kaj Olesen A/S Kaj Olesen A/S knife sharpener, dimensions: 610 mm x 740mm x 440 mm.

250

111 Baader Baader mobile skinning and por�oning machine, type: 66,project number: 310148, year of construc�on: 1999, 400 V,3 Ph, 50 Hz, 2.0 A, working width: (2x) 90 mm, plas�c meshbelt, belt width: (2x) 100 mm, total dimensions: 2600 mm x950 mm x 1000 mm.

7500

112 C. Hoegger AG C. Hoegger AG meat press, type: SP 890, fabrica�onnumber: 9587, year of construc�on: 1996, 220/240 V, 50 Hz,0.5 kW, 3-8 bar, dimensions: 2500 mm x 900 mm x 1700mm.

7500

113 Rühle Rühle dicer with li�er for 200 liter meat bins, type: SR 3,number: 43, year of construc�on: 2004, 400 V, 3 Ph, 50 Hz,16 A, 3/7.0 kW, dimensions chamber: 120 mm x 120 mm,total dimensions: 1400 mm x 3000 mm x 2100 mm.

8000

114 Bilwinco Bilwinco 10 heads mul�head weigher, machine type: BW210-W, serial number: 011, order number: 5632, year ofconstruc�on: 2005, 3x 400 V, 50 Hz, 16 A, 5-10 bar,maximum: 1500 gram, minimum: 200 gram, dimensions:1900 mm x 1900 mm x 1300 mm. Machine incomplete,missing display, including wooden pallet box with parts.

5000

115 Uni Food TechnicA/S

Uni Food Technic A/S strip cu�er, type: DC-700, serialnumber: 2004-333, plas�c blocked belt, belt width: 660 mm,(1x) 25 blades, distance between blades: 25 mm, and (1x) 18blades, distance between blades: 25 mm, total dimensions:2900 mm x 1500 mm x 1800 mm.

10000

117 Marel Marel meat press, machine type: Presso 600, serial number:082600-00003, year of construc�on: 2006, 2 x 400 V/3 x 220V, 50/60 Hz, 2.1 kW, weight: 800 kg, belt width: 605 mm,height dividers: 50 mm, distance between dividers: 200 mm,total dimensions: 3000 mm x 2700 mm x 1800 mm.

2500


118 NN pin boneremover

6-lane pin bone remover, belt width: (2x) 800 mm, totaldimensions: 1800 mm x 650 mm x 1450 mm.

10000

119 NN transport belt Double transport belt for 6 lanes, s/s frame, plas�c belt, beltwidth: (2x) 800 mm, total dimensions: 1800 mm x 650 mm x1450 mm. Used as ou�eed belt for lot number 118.

2500

120 Bosgraaf Bosgraaf depositor, type: MX30S-50/10, number:200917212, year of construc�on: 2009, dimensionsdepositor: 1700 mm x 1000 mm x 2500 mm, dimensionstrolley: 1000 mm x 750 mm x 1100 mm. Control panelincomplete. Technical condi�on unknown.

500

121 Ilpra Ilpra traysealer, serial machine: Foodpack, model: SpeedyPN10, serial number: FP 9104, year of construc�on: 2011,400 V, dye: (2x) 212 mm x 124 mm, Busch vacuum pump,type: RA 0063 F 5K3, year of construc�on: 2010, capacity:63 m³/hour, total dimensions: 2900 mm x 950 mm x 1600mm.

3000

122 HumbersideEngineeringSupplies LTD

Humberside Engineering Supplies LTD washing machine forsmoke trolleys, infeed width: 700 mm, clearance: 1250 mmx 1500 mm x 2200 mm, Johnson pump, type: FRES65-230,total dimensions: 2400 mm x 1800 mm x 2560 mm.Including pallet with s/s pipings.

1500

123 Penko Engineering Penko Engineering weighing belt, type: 762100-SS00-CUS-EN, plas�c belt, belt width: 400 mm, belt length: 2700 mmand 1500 mm, total dimensions: 3800 mm x 1600 mm x1850 mm.

500

124 Nijal Nijal vacuum filling machine with li�er for 200 liter meatbins, type: PSV 330 N, serial number: 0790304, year ofconstruc�on: 2004, dimensions: 1500 mm x 1600 mm x1920 mm.

1000

125 NN doubletransport belt

Double transport belt used as fille�ng table, s/s frame,plas�c belts, belt width (3x): 300 mm, total dimensions:2050 mm x 1200 mm x 1300 mm. Missing work pla�orms.

250

126 NN glazing belt Glazing belt, s/s mesh belt, belt width: 610 mm, totaldimensions: 2150 mm x 1000 mm x 1400 mm.

1000

127 Kaj Olesen A/S Kaj Olesen A/S mobile hopper, type: S, serial number:04.09.18, year of construc�on: 05-00, dimensions hopper:450 mm x 450 mm x 420 mm, total dimensions: 800 mm x600 mm x 1900 mm. Including pallet with parts.

2000

128 Carnitech Carnitech inliner, type: PM45, id number: 1611800, year ofconstruc�on: 2008, belt width: 600 mm, total dimensions:2400 mm x 1000 mm x 2000 mm.

1500

129 Karl Schnell GmbH& Co

Karl Schnell GmbH & Co vacuum filling machine with li�erfor 200 liter meat bins, type: 596, serial number: 21533,year of construc�on: 1999, 400 V, 50 Hz, 22.5 A, filling,por�oning.

3000


130 Poly-Clip SystemsGmbH & Co. KG

Poly-Clip Systems GmbH & Co. KG mobile automa�c sealerand clipper, type: TSCA 160-L, number: 103/12, 400 V, 3 Ph,50/60 Hz, 12 A, 6.0 kW, 5-7 bar, 1375 kg, belt width: 75 mm,seal length: 200 mm, diameter pipes: 45 mm and 30 mm,total dimensions: 2250 mm x 1350 mm x 1750 mm.Including pallet with 8 boxes of Poly-Clip clips, type: R-IDL07-175, 55000 clips per box. Machine is new.

50000

131 Carnitech Carnitech mobile salt dispenser, type: GT 1402, machinenumber: 03-0116, year of construc�on: 2003, s/s mesh belt,belt width: 610 mm, dimensions hopper: 700 mm x 650 mmx 350 mm, total dimensions: 1600 mm x 1250 mm x 1700mm.

2500

132 Marel Marel spli�er, type: spli�er, serial number: 1004, year ofconstruc�on: 2000, belt type: Intralox 2400 FE Radium, size:2x152x3200x130L, 230 V, 0.65 kW, belt width: (2x) 150 mm,total dimensions: 1500 mm x 1000 mm x 1300 mm.

1000

133 Kaufler Kaufler fat sheeter, type: BK, number: 10038, year ofconstruc�on: 1988, 380 V, plas�c wire belt, belt width: 405mm, working width: 450 mm, total dimensions: 1750 mm x800 mm x 1500 mm.

500

134 Kaufler Kaufler fat sheeter, type: BKI, number: 10088, year ofconstruc�on: 1988, 380 V, plas�c wire belt, belt width: 405mm, working width: 450 mm, total dimensions: 1750 mm x800 mm x 1500 mm.

500

135 Marel FoodSystems / JansenTechniek

Marel Food Systems / Jansen Techniek infeed belt for graderwith 2 flippers, type: S1500/25 FG, year of construc�on:2012, plas�c mesh belt, belt width: 254 mm, totaldimensions: 2000 mm x 1200 mm x 2000 mm.

500

136 Marel FoodSystems / JansenTechniek

Marel Food Systems / Jansen Techniek infeed belt for X-Rayscanner with 2 flippers, model: toevoer X-Ray, type:S1500/254 FG, year of construc�on: 2012, plas�c mesh belt,belt width: 254 mm, total dimensions: 1600 mm x 1000 mmx 2100 mm.

500

137 Carnitech Carnitech fillet washer, type: CT1636.20, machine number:07-0108, year of construc�on: 2007, 3 x 400 V, 50 Hz, 18 A,plas�c mesh belt, belt width: 595 mm, clearance: 650 mm x70 mm, total dimensions: 2400 mm x 1000 mm x 1520 mm.

5000

138 Inject Star Inject Star cooled vacuum tumbler with massaging paddles,model: IM-3000 COOL, machine number: IM3000-101, yearof construc�on: 2010, 3 x 400 V, 50 Hz, diameter screw: 150mm, Busch vacuum pump, type: RA 0040 F 503, number:090040191, year of construc�on: 2009, capacity: 40 m³/hour, total dimensions: 3300 mm x 1800 mm x 2450 mm.Including suc�on device for tumbler with pallet wit manualvalve, dimensions suc�on device: 1000 mm x 1600 mm x950 mm.

25000


139 Stephan Stephan micro cu�er, type: MCH D100 A, number: 170514,year of construc�on: 2010, motor: DA 315 S, 400 V, 50 Hz,202 A, 110 kW, 2975 U/min, total dimensions: 2650 mm x1100 mm x 1300 mm. Completely overhauled.

15000

140 Handtmann Handtmann mobile li�er for 200 liter meat bins, li�ingheight: 2000 mm, total dimensions: 1550 mm x 1600 mm x2900 mm.

500

141 Talsa Talsa mobile mixer, model: MIX100E, serial number: 120753,year of construc�on: 2012, 230/400 V, 3 Ph, 50 Hz, 0.75 A,0.55 kW, volume: 100 liter, total dimensions: 700 mm x 1050mm x 1150 mm.

500

142 Acadian Acadian X-Ray scanner, model type: G40, serial number:AS120133, year of construc�on: 2008, 6 A, plas�c belt, beltwidth: 500 mm, double plas�c mesh infeed belt, belt width:(2x) 200 mm, total dimensions: 2800 mm x 850 mm x 2200mm.

1500

143 Avery Dennison Avery Dennison mobile label printer, type: ALX 924/5, serialnumber: 0071841104-ALX925, year of construc�on: 2011,100-240 AC, 50/60 Hz, 3.5-1.5 A, dimensions: 750 mm x 750mm x 1100 mm.

750

144 Meyn 11 pallets with parts for Meyn fille�ng line , among others:s/s frames for Meyn slicing modules and circular knifes.

7500

145 Spako Spako smoke chamber for 1 smoke trolley, model controlpanel: MCTT7, inside dimensions: 980 mm x 720 mm x 1700mm, total dimensions: 1650 mm x 900 mm x 2200 mm.

2000

146 Spako Spako smoke generator, type: VRG, serial number: 17590,year of construc�on: 1998, 380 V, 50 Hz, 2.05 kW,dimensions: 1050 mm x 850 mm x 2120 mm.

2000

147 Spako Spako smoke chamber for 1 smoke trolley, type: SPM 1402,serial number: 18625, year of construc�on: 1999, 220-380V, 50 Hz, 15.4 kW, control panel: MCTT5, inside dimensions:980 mm x 720 mm x 1700 mm, total dimensions: 1650 mm x900 mm x 2200 mm.

2000

148 NN pin bone checktable

Pin bone check table, s/s frame, plas�c belt, belt width: 795mm, total dimensions: 2100 mm x 1000 mm x 1700 mm.

1000

149 NN trolley S/s trolley, dimensions: 1150 mm x 350 mm x 950 mm. 50

150 NN mobile table S/s mobile table, dimensions: 2500 mm x 950 mm x 850mm.

100

151 Bastra Bastra con�nuous smoke chamber for 3 smoke trolleys, withhorizontal air flow, Bastra smoke generator, type: 200, fabricnumber: 0017, year of construc�on: 1996, 230 V, 1.57 kW,50 Hz, medium: sawdust, dimensions: 3600 mm x 1600 mmx 3300 mm.

2500

152 Inotec GmbH Inotec GmbH li�er for 200 liter meat bins, type:IHV-3000-300, machine number: 400-00195, year ofconstruc�on: 2005, 230/400 V, 3 Ph, 50 Hz, 9.0 A, 4.0 kW,

250

153 NN li�er for meatbins

Li�er for 200 liter meat bins, li�ing height: 1950 mm, totaldimensions: 1100 mm x 700 mm x 2900 mm.

250


154 Busch Busch vacuum pump, type: 400-216, number: 31063,capacity: 400 m³/hour, vacuum: 2 mbar, dimensions: 1600mm x 800 mm x 1000 mm.

400


Li�er for 200 liter meat bins, li�ing height: 1800 mm,maximum capacity: 300 kg, total dimensions: 1200 mm x700 mm x 3200 mm.

250

156 Handtmann Handtmann li�er for 200 liter meat bins, li�ing height: 2900mm, total dimensions: 1200 mm x 900 mm x 2750 mm.

250

157 NN eleva�ng belt Eleva�ng belt with dividers, s/s frame, plas�c belt, beltwidth: 700 mm, height dividers: 50 mm, distance betweendividers: 320 mm, total dimensions: 2850 mm x 800 mm x700 mm.

250


Li�er for 200 liter meat bins, li�ing height: 2100 mm, totaldimensions: 800 mm x 600 mm x 3000 mm. Technicalcondi�on unknown.

250

159 Dodman Dodman transport belt, machine number: DL 1367, year ofconstruc�on: 2006, s/s frame, plas�c belt, belt width: 400mm, belt length: 2050 mm, total dimensions: 2300 mm x600 mm x 1050 mm.

250

161 MarpetFabrica�ons

Marpet Fabrica�ons transport belt, serial number: 0344,year of construc�on: 2003, 240 V, 3 Ph, 0.15 kW, s/s frame,plas�c belt, belt width: 300 mm, total dimensions: 4150 mmx 500 mm x 900 mm.

250

162 NN transport belt Transport belt, s/s frame, plas�c belt, belt width: 400 mm,belt height: 1430 mm, total dimensions: 6700 mm x 700 mmx 1600 mm.

500

163 Fomaco Fomaco brine mixer, model: FBM 1500, machine number:11058-2007, year of construc�on: 2007, 3 x 400 V, 50 Hz,maximum fuse: 35 A, Inoxpa pump, type: SE-26E, number:I011808D, 220/380 V, 3000 rates per minute, totaldimensions: 2400 mm x 2100 mm x 2300 mm. Cover ofpump is damaged.

5000

164 NN mixing tank Mixing tank with agitator, diameter tank: 1400 mm, heighttank: 2000 mm, Flux-Geräte GmbH agitator, type: FRM 100-LA8.

250

165 Food DesignApplica�ons

Food Design Applica�ons indirect gas oven, model number:MSOG/2-100/800, ref. number: 5038, year of construc�on:08-2004, 2 Lanemark Interna�onal Limited gas burners,model: TX3N, serial number: J20311/2, year of construc�on:06/2004, btu/h: 170 kW, heat input: 580.000, burner headpressure: 2.8, natural gas, 400 V, 3 Ph, 50 Hz, 4.2 A, 2.2 kW,clearance: 1130 mm x 250 mm, belt width: 1000 mm, totaldimensions: 10500 mm x 2200 mm x 3000 mm, dimensionsswitch cabinet: 1750 mm x 600 mm x 2400 mm.

5000

166 Marel Marel fille�ng belt with spraying unit, type: con-mstr, serialnumber: A023778, 400 V, 3 Ph, 0.25 kW, s/s frame, plas�cmesh belts, belt width: (2x) 305 mm and (1x) 300 mm, totaldimensions: 400 mm x 1420 mm x 1430 mm.

1000


167 Scanvaegt Scanvaegt A/S sor�ng belt with 8 flippers, belt width: 246mm, total dimensions: 5300 mm x 900 mm x 950 mm.Including pallet with parts.

250

168 NN work table Work table with slide and pla�orm, total dimensions: 2700mm x 2300 mm x 1300 mm. Pallet boxes can be placedunder table.

100

169 NN transport belt Transport belt, s/s frame, plas�c mesh belt, belt width: (2x)250 mm, total dimensions: 5200 mm x 500 mm x 1000 mm.

100

170 NN frame S/s mobile frame, dimensions: 3000 mm x 700 mm x 1150mm.

25

171 NN curveconveyor

90° curve conveyor, s/s frame, plas�c mesh belt, belt width:290 mm, total dimensions: 3400 mm x 1200 mm x 1000mm.

250

172 Carnitech Carnitech mobile 45° eleva�ng curve conveyor, type: PM 45,iden�fica�on: 159600101, year of construc�on: 2008,plas�c mesh belt, belt width: 300 mm, eleva�ng from 900mm to 1400 mm, total dimensions: 6000 mm x 1700 mm x1400 mm.

250

173 Handtmann 2 agitators for Handtmann vacuum filling machine, length:900 mm.

100

174 Stork Stork �l�ng device for barrels, type: LF-1600, serial number:E85-01, 400 V, 3 Ph, 50 Hz, maximum weight: 200 kg,dimensions: 2000 mm x 1650 mm x 1800 mm.

1000

175 NN glazing belt Mobile glazing belt with dividers, plas�c mesh belt, beltwidth: 1200 mm, divider height: 95 mm, distance betweendividers: 310 mm, eleva�ng height: 1100 mm, totaldimensions: 3250 mm x 1400 mm x 1500 mm.

750

176 Van Leeuwen Van Leeuwen 90° curve conveyor, type number: STZT 1103,year of construc�on: 2011, s/s frame, plas�c belt, belt isincomplete, total dimensions: 2300 mm x 2800 mm x 1050mm.

250

177 NN eleva�ng belt S/s eleva�ng belt with dividers and infeed hopper, beltwidth: 600 mm, distance between dividers: 285 mm, dividerheight: 130 mm, eleva�ng height: 1900 mm, dimensions:2650 mm x 1200 mm x 2050 mm.

750

178 Baader Baader automa�c fish feeder, type: 482, dimensions: 2900mm x 1850 mm x 1750 mm. Technical condi�on unknown.

1000

179 Frigoscandia Frigoscandia freezing tunnel, model: AGA Freeze L, 1250-9-N, number: 1270021, clearance: 1400 mm x 400 mm, totaldimensions: 9400 mm x 2100 mm x 1500 mm. Includinginfeed sta�on, s/s mesh belt, belt width: 760 mm, totaldimensions: 2600 mm x 2900 mm x 2200 mm and palletwith parts and s/s mesh belt, belt width: 1250 mm.

5000


180 Weboma�c Weboma�c vacuum line consis�ng of: Weboma�c beltvacuum machine with 1000 qm roots pump, type:WBM1350, year of construc�on: 2006, Weboma�c dip tank,type: TBi 1.6, machine number: 84NA640, 400 V, 3 Ph, 50Hz, 0.93 A, 0.37 kW, suc�on device for rest film and externalBusch vacuum pump, type: RA 0502 B 4ZI DUXX, number:C0441000552, year of construc�on: 2004, 0.5 mbar.Machine will be taken out of produc�on on monday 7th ofMay. Viewing in consulta�on with Industrial Auc�ons.

12500

181 Marel Marel double lane laser eye por�on slicer, type: IPM3 X600,year of construc�on: 2003. On other loca�on in theNetherlands, viewing in consulta�on with IndustrialAuc�ons.

15000

182 Yamato Scale Co.LTD

Yamato Scale Co. LTD 12-heads mulihead weigher, type: 343RW2, fabric numer: 88293, year of construc�on: 1988,weighing capacity: 1000 gram, T= -1000 gram, dimensions:1600 mm x 1600 mm x 1700 mm. Located in Dronten (NL)viewing and pick up in consulta�on with Industrial Auc�ons.

1750

183 Marel Marel target batcher, type: TB 3000, serial number: 06-143,year of construc�on: 2006, maximum product size: 330 mmx 190 mm, maximum batches: 30 per minute, maximumbatch size: 2 kg, 1.4 A, 0.5 kW, weight: 330 kg, totaldimensions: 2150 mm x 800 mm x 1640 mm. On otherloca�on in the Netherlands, viewing in consulta�on withIndustrial Auc�ons.

15000

184 Ward BekkerSystems LTD

Ward Bekker Systems LTD. 12-heads mul�head weigher,type: Sparc, year of construc�on: 1997, weighing capacity:maximum 1000 gram, dimensions: 1600 mm x 1500 mm x1600 mm. Located in Dronten (NL) viewing and pick up inconsulta�on with Industrial Auc�ons.

1750


General Terms of the online auc�on

Ar�cle 1. Defini�ons

Delivery: the actual delivery of the lot to the buyer or to his authorized representa�ve;

Bid: each by a user in the auc�on (for a lot) bid amount;

User: the one who has registered on the website;

User Agreement: the agreement between Industrial Auc�ons and the user;

Lot: an ar�cle, or a number of ar�cles that are auc�oned together (under one number);

Purchase Price: the amount of the highest -allocated- bid increased by the Buyers

Premium above the highest bid and the VAT owed;

Purchase Agreement: the purchase agreement between buyer and seller;

Buyer: the user to whom the lot is allocated;

Registra�on: registra�on of the user on the website by comple�ng the registra�on form

found on the website;

Specific Online Auc�on Terms and Condi�ons: besides, in addi�on to or devia�ng from

these General Terms and Condi�ons, applicable regula�ons that apply, as stated on the

website for the specific auc�on;

Alloca�on: the declara�on of Industrial Auc�ons that a lot or combina�on of lots has

been allocated by payment of the purchase price to the highest bidder. Seller hereby

irrevocably authorizes Industrial Auc�ons to assign and sell ar�cles on behalf of the

seller(s);

Auc�on: internet sales organized by Industrial Auc�ons of movable goods;

Seller: the person(s) a lot is being auc�oned in whom/whose commission;

Website: website www.Industrial-Auc�ons.com, which is maintained by Industrial

Auc�ons, based in Oirschot;

Ar�cle 2. Applicability

2.1 These General Terms and Condi�ons apply both to the rela�onship between sellers

and Industrial Auc�ons, as the rela�onship between users/buyers and other third

par�es on the one hand and on the other hand Industrial Auc�ons. These condi�ons

therefore apply to (being) organized auc�ons by Industrial Auc�ons and through the

par�cipa�on in auc�ons by users and/or buyers.

2.2 The applicability of other General Condi�ons than the present, and (where

applicable) the Specific Online Auc�on Terms and Condi�ons is excluded.

Ar�cle 3. Registra�on on the website and the use

3.1 By registra�on on the website a user is able to follow the progress of auc�ons on the


/media/uploads/2017/08/30/terms-and-conditions-industrial-auctions.pdf

website. The user agreement is not transferable. By registra�on the user provides his

personal details to Industrial Auc�ons and chooses his own password to access the

website.

3.2 Industrial Auc�ons confirms the registra�on by e-mail to the user on the specified e-

mail address, a�er which user can gain access to the auc�on by using his chosen

password. User is obliged to behave a�er granted access to the website and do not

inflict damage to the website or to other users. User is liable for all ac�vi�es that occur

on the website a�er that access has been gained by using the password of user.

3.3 The user guarantees the accuracy and completeness of the provided personal details

at registra�on. If the personal details change at any �me, the user is obliged to inform

Industrial Auc�ons by return of such change(s).

3.4 Industrial Auc�ons reserves the right to refuse registra�on and to terminate

unilaterally, without giving a reason.

3.5 Industrial Auc�ons takes obtained personal data in records kept for that purpose.

Through registra�on on the website, the user gives consent to the use and the storage

and processing of the personal data recorded.

3.6 The user is forbidden to reproduce the website or any part thereof or make available

(through deep linking or otherwise) without the prior wri�en consent of Industrial

Auc�ons. Intellectual property is retained by Industrial Auc�ons.

3.7 By (one-off) registra�on user accepts these General Terms and Condi�ons each �me

that user logs on to the website and whether or not bids.

Ar�cle 4. The auc�on

4.1 Industrial Auc�ons reserves the right to cancel an auc�on earlier than reported on

the website or to extend one. In case of a technical malfunc�on of the website, causing

it not complete and/or inaccessible to all users, Industrial Auc�ons reserves the right to

extend the auc�on.

4.2 The effec�veness of the internet and its website depends on many factors and many

others. Industrial Auc�ons is not in control of many factors and can accept no liability for

things they are not in control off. User and seller declare themselves familiar with and

agree with the special circumstances of an internet auc�on and with the technical

imperfec�ons that can arise. Industrial Auc�ons must therefore limit its liability. For

example, it may involve down�me, interrup�ons, delays in the connec�on,

maintenance, updates, viruses, limited accessibility, et cetera et cetera. Industrial

Auc�ons is not liable for any damage that might result therefrom.

4.3 Industrial Auc�ons hereby exclude to both the user and the seller any liability for any

damage directly and/or indirectly, in any way arise, including but not limited to the

damage arising from the use of the website, unless there is intent or willful recklessness

of Industrial Auc�ons.

4.4 Industrial Auc�ons also accepts no liability for any damage whatsoever that arises in


any way by and/or arising from:

- Ac�ons by the user that may have been prompted by informa�on placed on the

website;

- The impossibility of using the website (completely) and/or another malfunc�on in the

website or the suppor�ng system;

- The failure of the lots to the specifica�ons as reported on the website;

- The fact that the informa�on on the website is incorrect, incomplete or out of date;

- Errors in the so�ware and/or the suppor�ng system of the website;

- The unlawful use of systems, including the website of Industrial Auc�ons by a third

party;

- Acts of the seller a�er the user has concluded a purchase agreement;

4.5 Industrial Auc�ons organizes online auc�ons on behalf of sellers. She does not sell

own products. Industrial Auc�ons reserves the right to cancel an auc�on, earlier than

reported on the website, or to extend one.

Ar�cle 5. Security

5.1 Industrial Auc�ons strives to secure its systems against loss of data and/or any form

of unlawful use and takes appropriate technical and organiza�onal measures, including

taking into account the state of the technology.

5.2 Industrial Auc�ons is not liable for loss of data, damage to files, unlawful access to

computers or files, viruses spread via the website or other unlawful programs or files or

any other consequence of the use made of the website.

5.3 The website may contain links to other websites. Industrial Auc�ons has no control

over such sites and is not responsible for the content of those sites.

Ar�cle 6. Descrip�on lots

6.1 Industrial Auc�ons and the person on whose behalf the lot will be auc�oned strive

to achieve the greatest possible accuracy and clarity of the descrip�on of a lot on the

website, auc�on catalogs, other auc�on brochures, adver�sements and such, without

any liability for damages arising from incorrect or incomplete descrip�ons or other

damage.

6.2 Pipes, cables and/or other connec�ons for energy, control or produc�on that are

located on/in a lot are to be, unless expressly stated in the Specific Online Auc�on Terms

and Condi�ons stated, only sold to the first valve, fi�ng or aplied mark. Underground or

built-in connec�ons never are part of the lot, unless explicitly stated otherwise in the

Specific Online Auc�on Terms and Condi�ons.

Ar�cle 7. Adjustments; opera�on

7.1 If and insofar as any clause of these General Terms and Condi�ons is invalid or


unenforceable, the remaining clauses of these General Terms and Condi�ons will remain

valid. Industrial Auc�ons will then adopt a new clause to replace the invalid/annuled

clause, as far as possible the scope of the invalid/annuled clause shall be respected.

7.2 Industrial Auc�ons can, in addi�on to these General Terms and Condi�ons, declare

the Specific Online Auc�on Terms and Condi�ons applicable. They are therefore already

accepted by the user. In case of contradic�on prevails the clause of the Specific Online

Auc�on Terms and Condi�ons over the clause in these General Terms and Condi�ons.

7.3 The present General Terms and Condi�ons may be deviated only when this is

s�pulated in wri�ng by an authorized representa�ve of Industrial Auc�ons.

7.4 Industrial Auc�ons reserves the right to modify these General Terms and Condi�ons.

Changes take effect 24 hours a�er an e-mail is communicated to the user or if they

(digital) have been accepted comes into effect.

Ar�cle 8. Auc�on organiza�on by Industrial Auc�ons

8.1 The organiza�on, prepara�on and execu�on of the auc�on lie with Industrial

Auc�ons.

8.2 Industrial Auc�ons has the authority before, during or a�er the auc�on without

assigning any reasons:

- Not to recognize a bid as such;

- To exclude one or more users from the auc�on;

- To consolidate ar�cles into lots, to split lots and take lots from the auc�on;

- To repair mistakes made by Industrial Auc�ons in bids and/or alloca�ons, without a

user is able to make use of these errors and/or derive any rights from them;

- Lots whether or not to allocate;

- To implement other, in the opinion of Industrial Auc�ons, useful or necessary measures

or changes;

8.3 Industrial Auc�ons is authorized before par�cipa�on in certain auc�ons and/or bids

on certain lots to require prior, from the user, a bank guarantee or other form of security

to the choice and sa�sfac�on of Industrial Auc�ons (to be judged by Industrial Auc�ons)

8.4 The judgment of Industrial Auc�ons concerning what has taken place before, during

or a�er the auc�on, is binding.

Ar�cle 9. Bid; Purchase Agreement

9.1 The user can place a bid on the website on one or more lots. Every bid is

uncondi�onal, irrevocable and without reserva�on. Industrial Auc�ons and/or the seller

is/are en�tled, without giving any reason not to accept bids. Bids are placed exclusive

buyers premium and VAT. Industrial Auc�ons is authorized to place bids on behalf of

third par�es.

9.2 If a lot is accompanied by one or several other lots as a combina�on in auc�on this


shall be indicated on the page of the individual lot. In that case, there can be placed bids

first on the individual lots of the combina�on and a�er the closing of all individual lots,

offered on the combined lot. Individual lots can be allocated only if the total amount of

the highest sustainable bids on the individual lots is higher than the highest sustainable

bid on the combina�on. The combina�on will be allocated solely if the highest

sustainable bid on the combina�on is higher than the total amount of the highest

sustainable bids on the individual lots.

9.3 Bids can be placed in the form of a "sta�c bid" or a "proxy bid". In a sta�c bid, the

user places a bid in the form of a fixed amount per lot. In a proxy bid the user indicates

the maximum price he is willing to pay for the lot. The auc�on system then ensures that,

a�er outbidding by a third party, in the name of the user, the minimally possible higher

bid is introduced, as long as the maximum indicated by the user has not been reached. A

proxy bid can only be disabled by the user by placing a sta�c bid that at that moment is

the highest bid.

9.4 The purchase agreement arises through alloca�on. Alloca�on is generally given to

the user who has made the highest bid. By applying the clause of ar�cle 9.1, through

condi�ons for alloca�on as included in the Specific Online Auc�on Terms and Condi�ons

or for other reasons at the discre�on of Industrial Auc�ons may be allocated to a

different user than the user who has placed the highest sustainable bid instead.

9.5 The buyer will get within 48 hours a�er the auc�on has been closed, at least as

quickly as possible (Saturday, Sunday and holidays not included) confirmed by e-mail on

behalf of the seller(s) that the purchase agreement has been concluded. If the user does

not get an e-mail within the period men�oned above, this means that his bid has not

been allocated. Industrial Auc�ons reserves the right not to allocate or to allocate under

suspensive condi�on(s).

9.6 The risk of the lot(s) is transferred from the seller to the buyer at the moment of

alloca�on. The seller is up to the alloca�on obliged to properly insure the goods and

maintain properly insured against fire, explosion and water damage and the�. Seller is

also obliged to take out adequate insurance and liability insurance and maintain so. The

policies and the proof of premium payment of these insurances (or at least copies of

them) must be provided by seller on first request to Industrial Auc�ons.

9.7 Industrial Auc�ons is not a party to the purchase agreement but merely mediates in

the crea�on of purchase agreements between buyer and seller. Its content is always

precisely defined. Seller and buyer realize there on the part of Industrial Auc�ons may

involve a conflict of interest. Buyer and seller hereby give permission to Industrial

Auc�ons for simultaneously serving (the interests of) the buyer and seller.

9.8 If there is a forced sale, this will be stated in the Specific Online Auc�on Terms and

Condi�ons.

9.9 In the event seller is a trustee in his capacity as receiver, ar�cle 7:19 Civil Code


applies.

9:10 If the auc�on takes place in the presence of a notary or bailiff, he will supervise the

auc�on and the bids placed there and alloca�ons.

Ar�cle 10. Guarantees, claims and indemni�es

10.1 Industrial Auc�ons sells third party products, for third par�es. Seller and buyer

realize that Industrial Auc�ons is unaware or may be of the nature, condi�on or similar

of the sold. Industrial Auc�ons and/or the seller provide regarding the lots and possible

claims of third par�es to these, no warran�es of any kind. Buyer waives all rights which

do not belong to the buyer under mandatory law.

10.2 The lots are sold in the state in which they exist on the date of alloca�on with all its

possible defects, benefits and burdens. Industrial Auc�ons and/or seller give in no

indemnity for visible or hidden defects or warranty in connec�on with completeness,

numbers, func�oning, usability, saleability, the existence or absence of rights or claims

of third par�es and or the possibility of transfer to third par�es. Defects of whatever

kind, disappointed expecta�ons of the buyer and/or receiving third par�es do not

provide any en�tlement to (damage) compensa�on and/or se�lement and/or

suspension. The buyer shall be deemed to have carefully examined the lot bought by

him beforehand.

10.3 If in respect of the lots claims of third par�es arising from property reserved,

(intellectual) property rights and/or other third party rights be exercised, Buyer shall

keep the relevant lot(s) for those third party(ies), under the obliga�on to issue this first

request to that third party(ies), or otherwise to make appropriate arrangements with

such third par�es.

10.4 The seller shall indemnify Industrial Auc�ons against each claim of third party(ies).

The buyer indemnifies Industrial Auc�ons and/or the seller against each claim by a third

party in connec�on with the purchase agreement.

Ar�cle 11. Payment obliga�ons of the buyer

11.1 The buyer has the obliga�on to pay the purchase price within three days (not

including Saturday, Sunday and holidays) a�er confirma�on of the purchase agreement

on a by Industrial Auc�ons indicated account number. Payment must be made in Euros

or in another currency indicated by Industrial Auc�ons.

11.2. The buyer is not en�tled to any se�lement or suspension.

11.3 The buyer is obliged to first request to provide (addi�onal) security (such as a bank

guarantee and or pledge). The buyer hereby grants an irrevocable power of a�orney to

Industrial Auc�ons to (do) se�le rights of pledge both before and a�er delivery on

behalf of the buyer for the benefit of Industrial Auc�ons. The buyer declares to be

authorized to do so.


11.4 In case of late payment of the purchase price 15% of the purchase price, being a

fixed amount for collec�on costs and/or extrajudicial costs, will be charged to the buyer

by Industrial Auc�ons plus the statutory interest on the outstanding amount plus 3% per

year, with effect from the date the payment had to be made un�l the date of effec�ve

payment.

Ar�cle 12. Viewing days, auc�on days, pick-up days

12.1 The seller and/or Industrial Auc�ons can organize viewing days and pick-up days.

The par�es realize that Industrial Auc�ons does not have any influence or control over

the goods, the loca�on or the circumstances in which the viewing days and pick-up days

are being organized. Therefore, Industrial Auc�ons can not accept any liability. Whoever

enters buildings and/or grounds on viewing days or delivery days does so en�rely at

their own risk. It is compulsory to follow up instruc�ons given by Industrial Auc�ons

and/or by Industrial Auc�ons hired people. Industrial Auc�ons and the seller do not

accept any liability for damage arising on viewing days, or entering the buildings or

grounds or the consequences that that entails.

Ar�cle 13. Delivery

13.1 If and as soon as the buyer has met all his payment obliga�ons, the buyer may pick

up the lot(s) at the by Industrial Auc�ons determined �mes and place on presenta�on of

a proper iden�fica�on, being the delivery. The delivery is fully at the expence and risk of

the buyer. The buyer is obligated to pick up the lot(s) not later than the date specified in

the Specific Online Auc�on Terms and Condi�ons. Industrial Auc�ons can s�pulate that

(a) certain(e) lot(s) can be picked up only a�er the picking up of other lots.

13.2 Before delivery the buyer is deemed to have fully explored the lot well and buy the

lot in the condi�on in which it is. A�er the delivery the purchase agreement can no

longer be terminated or destroyed by the buyer. Pipes, cables and/or other connec�ons

that are located on/in a lot are to be, unless otherwise provided by law or Industrial

Auc�ons expressly stated otherwise, only part of the purchased up to the first valve,

fi�ng, or the applied mark. Underground or built-in pipes, cables or other connec�ons

are not part of the purchased, unless explicitly stated otherwise by Industrial Auc�ons.

13.3 If it appears that a lot can not be delivered because of claims by third par�es or

because of the fact that the delivery would cause unacceptable damage to the buildings

or premises where the lot is situated or for other reasons appears to be objec�onable

(at the discre�on of Industrial Auc�ons), Industrial Auc�ons is en�tled to terminate the

purchase agreement. This termina�on occurs by e-mail and/or registered le�er to the

buyer at the address supplied by the buyer, wherea�er Industrial Auc�ons and/or the

seller have no further obliga�on than to refund already made payments by the buyer to

Industrial Auc�ons in respect of the purchase of the lot(s).

13.4 The buyer whose lot(s) obstructs the collec�on of other lots, is obliged immediately


a�er e-mail and/or summons by Industrial Auc�ons to the address specified by the

buyer to take care of the collec�on of his lot(s), failing which Industrial Auc�ons is

en�tled to make this collec�on and possible storage happen by third par�es for the

account of the buyer.

13.5. Ownership of the goods passes a�er delivery, but not before the buyer has fulfilled

all his obliga�ons (and the seller or other third par�es have given their consent). A�er

alloca�on the buyer is obliged to properly insure and maintain properly insured against

fire, explosion, water damage and the� and to provide the insurance policy and proof of

premium payment of this insurance on first request to Industrial Auc�ons. The buyer is

obliged to respect rights of third par�es.

Ar�cle 14. Termina�on

14.1 If the buyer fails to perform any obliga�on under the agreement with Industrial

Auc�ons or the purchase agreement, including but not limited to failure to �mely or

complete payment of the purchase price; not picking up the lot(s) in �me and/or not

providing the required informa�on for delivery, finds the buyer is legally in default

without further no�ce being required, and Industrial Auc�ons may terminate the

agreement between herself and the buyer. Industrial Auc�ons may terminate the

purchase agreement on behalf of the seller. In that case Industrial Auc�ons is allowed to

assign the lot(s) to another without Industrial Auc�ons and/or the seller is/are held to

any (damage) compensa�on.

14.2 In the event of termina�on referred to in 14.1, the buyer owes Industrial Auc�ons

in addi�on to the buyers premium a lump sum amount of 25% of the purchase price to

cover administra�ve, storage, insurance and transport costs, etc., undiminished the

right of Industrial Auc�ons and/or the seller to claim full compensa�on.

Ar�cle 15. Liability

15.1 Industrial Auc�ons works on loca�ons which she has no control over, with things

that are not hers. Therefore she must limit her liability, otherwise she runs too much

risk, while she herselve is not in a posi�on to limit the risks. Industrial auc�ons is not in

control of the sites, auc�ons, IT environments and auc�oned goods. The liability of

Industrial Auc�ons (if and when a�er applica�on of the other provisions of the contract

s�ll remaining) is at all �mes and in all cases limited to the amount to which the liability

insurance of Industrial Auc�ons in a given case en�tlement to benefits. If Industrial

Auc�ons is uninsured, the insurer will not cover grants or for whatever reason, no

payment takes place, then the liability of Industrial Auc�ons in any case is limited to €

5,000.00. Any claim on Industrial Auc�ons (both property law and contract law), is not

transferable or to encumber. This limita�on does not apply to intent or gross negligence

of Industrial Auc�ons.


15.2 Industrial Auc�ons is not liable for any indirect or consequen�al damages.

Compensa�on for indirect damage is excluded at all �mes and in all cases, including at

least but not limited to consequen�al damages, lost profits, lost savings and damage due

(corporate) stagna�on, loss of goodwill, loss of data, and such. Furthermore, any liability

of Industrial Auc�ons is excluded in connec�on with any defect of the lot(s) or in respect

of (alleged) infringement of the rights of (the intellectual property of) third par�es. The

buyer declares that he acknowledges that in respect of the lot(s) possibly rights (of

intellectual property) rest with third par�es.

15.3 Industrial Auc�ons and the seller are not liable for:

- Damage to persons or property or business prior to the closing of the purchase

agreement or prior to alloca�on arising or resul�ng;

- Damage to on, through or in connec�on with the purchased goods caused (including

the loss of the good itself);

- Visible and invisible defects. The buyer is required to do research. If the buyer neglects

that, then the consequences are for the buyer;

- Damage caused by environmentally harmful substances in or on the purchased;

- Damage caused by computer failures (both in terms of hardware, so�ware, viruses,

files, internet, all in the broadest sense);

- Damage caused by power of disposi�on of the seller or rights of third par�es which

causes damage to the buyer;

15.4 In engaging third par�es Industrial Auc�ons will always exercise due care. Industrial

Auc�ons is not liable for any shortcomings of these third par�es. For that the seller and

the buyer safeguard Industrial Auc�ons.

15.5 Any right of the buyer or the seller shall expire two months a�er the alloca�on,

notwithstanding the provisions to art. 6:89 BW.

Ar�cle 16. Applicable law

16.1 All agreements between Industrial Auc�ons and third par�es is governed by Dutch

law.

16.2 The Dutch text of the General Terms and Condi�ons is the original text. If the

General Terms and Condi�ons are used in several languages, the Dutch text will

therefore be given preference in case of ambigui�es or contradic�ons.

16.3 In the event of a dispute, the competent court within the district of “Oost-Brabant”

has jurisdic�on to hear the dispute, notwithstanding the competence to Industrial

Auc�ons to submit a dispute to the competent court according to the law.


Notes


Address: Looyenbeemd 11

5652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208 Fax: +31 (0)40 2409 209 Email: info@industrial-auc�ons.com Web: www.industrial-auc�ons.com

Upcoming auc�ons:03-05 Online auc�on machinery for the complete food industry in

Ystad (SE) 08-05 Online auc�on machinery and inventory of former meat

wholesaler Fuß GmbH in Wuppertal (DE) 15-05 Online auc�on machinery and inventory on former loca�on

Struik Foods Belgium in Schoten (BE) 30-05 Online auc�on ca�le slaughter line, machinery and other

inventory on behalf of Vion Pfarrkirchen GmbH inPfarrkirchen (DE)

12-06 Online auc�on industrial coffee machines and othermachinery for the food industry in Birsfelden (CH)


mailto:[email protected]

https://www.industrial-auctions.com

Documents

Online auc on ﬁsh and meat processing machinery in Urk (NL) · 150 mm, total dimensions: 2500 mm x 600 mm x 870 mm. 250 19 Meca Plas c Meca Plas c traysealer, type: MECA 3000, number: