The stand of screen

The three systems we sent to you last week are hand model,not plastic model, so the machine

cases are not well-made, you will see some joint gap are a little wide, these was all inevitable,

because they are hand model, hope you understand. In the end of this month we will finish mould

making, then the case will make to be very excellent and more beauty, you will see in your next

order.

Because of the three system are prototypes, each screen and the stand i marked in above picture

are very hard to be fixed, you will find it's a little loose, however please don't worry, we will send

three new screens(include screen stand) to you we finished mould making. When you come to

Guangzhou, please take the three old screens back, thanks!

Before one machine come out ,generally speaking it will through 3 period.

1.design,

2.hand mold

3. plastic mold or injection mold

the finished product usually made by plastic mold or injection mold. but before that in case there

is something have to change or some place not so good , we have to make it with hand mold,to

confirm the design ,the quality ,and the workmanship,

so ,that is why before our finial system come out ,we make it by hand mold.it for testing .There

are some different between hand mold and plastic mold. maybe it looks semilar from

appearence ,but plastic mold actually has better quality and workmanship. sometimes hand mold

will cause the problem but plastic mold not ,