on Arduino Day - gtu.ac.in Day Report... · First session was started at 10:30AM by an Introduction of CiC3 Centre and ARDUINO by ... -Jaya Batra, ASOIT Arduino day workshop is inspiring

GUJARAT TEHCNOLOGICAL UNIVERSITY

Community Innovation & Co-Creation Centre

1 |Gujarat Technological University (http://www.gtu.ac.in/)|CiC3 (http://cic3.gtu.ac.in/)|

Contact: Raj Hakani [[email protected]] | Tel: +91-7574801054;

https://www.facebook.com/gtucic3

Report

on

Arduino Day organized on

17th -18th Feb 2018

at


IIT Gandhinagar Shed No. 2

Chandkheda Campus, Near Visat Cross Raod, Chandkheda

Ahmedabad






Details about Workshop

Subject:

Arduino Programming

How it will be useful to

student

:

Arduino is an open-source electronics platform based on

easy-to-use hardware and software. Arduino boards are

able to read inputs - light on a sensor, a finger on a button,

or a Twitter message - and turn it into an output -

activating a motor, turning on an LED, publishing

something online. You can tell your board what to do by

sending a set of instructions to the microcontroller on the

board. To do so you use the Arduino programming

language (based on Wiring), and the Arduino Software

(IDE), based on Processing.

What skill will be developed : Programming Skill will be developed. They will read

data from board, on sensor and social network.

Participant student Branch : Electronics and Communication, Instrumentation &

Control, Electrical, Computer, Information & Technology,

Biomedical, Mechanical, Mechatronics

Entries : 103 Participants

Faculty Mentor : Asst. Prof. Raj Hakani (CiC3 - GTU)

Gujarat Technological University has established Community Innovation &

Co-Creation Centre (CiC3) at GTU to promote innovation and to provide a facility

for the students, where they can develop products and test new ideas. C-i-C3 regularly

organizes workshops and seminars to upgrade knowledge and build advanced skills

among the students of Engineering.






Day – 1

First session was started at 10:30AM by an Introduction of CiC3 Centre and ARDUINO by

expert Asst. Prof Raj Hakani from CiC3 Section of GTU. By this session students had indepth

knowledge of ARDUINO. He has given introduction of different open source boards and briefed

about open source Community. The journey of Microprocessor and Microcontroller was explained to

students with different examples of application and assembling of programs of processors and

controllers. Also, he has explained various application in various domain of present technological era.

Prof. Raj Hakani introduced students about concept of CiC3 Lab and He motivated students to register

their idea in CiC3 and take maximum benefit of resources and knowledge provided in Workshop.

Next Session he has introduced Arduino board to students, which included different components of

Arduino and different Types of Arduino boards. He also demonstrated the Arduino software

installation and described how the software works with Arduino board. Pin Description and Pin

Command for an Arduino board.






Explaining various board of Arduino and Programming function

In the afternoon session Arduino boards were provided to students for Hands-on practical. In

this session Prof Raj Hakani has taught basic Arduino programming and Modification of program,

understanding of the digital & analog functions, and serial interface to students. Student performed

programming over the Arduino circuit for LED connection, LED Pattern, Seven Segment, LED

Matrix and interface with LCD.






Interfacing with LEDs, LED Pattern, LED Matrix

Day -2

Day 2 was started with interfacing of LCD, Making Counter on LED, Interfacing serial data

with and LCD, Digital Clock on simulation. Student also play with various command of LCD

Scrolling, blinking etc.






In the afternoon session Sensor and actuators were provided to students for Hands-on

practical. In this session Prof Raj Hakani has explained about sensors, need of sensors, type of sensor

working principal of sensors like Temperature measurement, distance measurement, magnetic sensor.

Student has interface LM35, Ultrasonic sensor, flex sensor, IR sensor and display received data on

serial monitor as well as on LCD display Screen. Student has also learnt various motor driver IC and

type of motors and also interface DC Gear motor with an Arduino.

Conclusion of Event

Overall student learnt the basics of working with Arduino and gained basic knowledge

of various Arduino development boards; Programming environment; onboard features of

Arduino Uno: I/O, Analog, PWM; Arduino shields, Interfacing with sensors, motors using

Arduino.






Workshop Glimpses











Feedback: -

� I am so glad after attending this workshop. Because i have always been fascinated by different

types of projects and technology. I would like to gain more knowledge about different Boards

in E&C as i am belonging from it and i also want some guidance from faculties. I have many

ideas and i would like to work over it with my practical & theoretical knowledge. Thank you

for choosing me for the Arduino day. I also want to learn how we can use our electronics

micro system in spacecraft.

- Bhoomi Patel , GEC - Rajkot

� IT WAS MY PLEASURE TO BE A PART OF YOUR WORKSHOP.

- Dhaval Mehta, VGEC

� Workshop was good, trainer was also having good knowledge and he teach us a lot thanking

him. -Divyesh kumar Balar

� I enjoyed and learnt a lot from it. Had great knowledge gaining time at CiC3. Wish to attend

many like this one.

- Kajal Gajjar, Govt. Polytechnic, Dahod

� It was a great learning experience. I would like to attend more of this kind of workshops. My

basic got cleared and got ideas about practical applications

- Udit Raval AIT

� It was an excellent workshop for the final year students. The professors were very helpful to

us and they shared their knowledge about Arduino very well. Also, we enjoyed learning about

interfacing Arduino with various devices. It was quite interesting to have the components and

performing practical interfacing with programming and observing the results with the

guidance of all of them. Thanks for such a wonderful workshop

-Jaya Batra, ASOIT

� Arduino day workshop is inspiring for me which uncover the great innovative features of

Arduino for me that could change our lifestyle to world class. I have just completed my

Mechanical Engineering on 2015 and I glad GTU for this type of workshops which elaborate

the new technology in the easy form for student’s improvements.

- JAYESH MAHITKAR, VICT






� From this workshop, i have learned basic things about configuring Arduino with our computer

system, developing programs for controlling Arduino controller and configuring other

hardware devices like LEDs, Sensors, and another kind of controller with Arduino and

making our application more suitable to any problem.

- Yogesh Kumar Savita, LD

� It was a good workshop. I learn more than expected. All mentors are supportive and provide

us detailed knowledge about topic.

- Komal Kumari , B.H Gardi

� it's very helpful to know about Arduino, and how its work, sensors, LED blinking, LED

Pattern LCD....

- Hardiktank, Amiraj College

� It was a good hand on experience with Arduino

- Bhavesh M Bharwad, SAL Engineering

� Workshop was really interested and i gained much knowledge about Arduino

- SMIT CHRISTIAN, Amiraj College

`

Documents

on Arduino Day - gtu.ac.in Day Report... · First session was started at 10:30AM by an Introduction of CiC3 Centre and ARDUINO by ... -Jaya Batra, ASOIT Arduino day workshop is inspiring