www.sportworks.com

®

Omnium No Scratch® Bicycle RackCapacity: 2 Warranty: 1 Year » Clean and orderly high density bicycle parking » Staggered design minimizes bike-to-bike

interference and entanglement » Bikes can be parked facing the same direction » Front wheel wells to ensure consistent bicycle

positioning » No Scratch® bumper protects bicycle frames

Revised: 10/08/2020

NYLON 66 NO SCRATCH

STAINLESS STEEL FEET AND WHEEL TRAYS EXCEPT FOR GALVANIZED RACKS

(34.3)

CC CC

(21.2)(24.5)

(0.25)

(12.2)

(8.1)

(35.2)

SECTION C-C FOOT DETAIL

(Ø0.438) 2X

Surface Mount Dimensions

Embedded Mount Dimensions

PRODUCT WEIGHT = 32.8 LB

PRODUCT WEIGHT = 35.8 LB

* All dimensions are in inches

(35.2)

(16.0)(21.2)(24.5)

(0.25)

(34.3)

EMBED IN CONCRETE(10.0)

(9.0)

(Ø0.469) 2XFOR 3/8REBAR

NYLON 66 NO SCRATCH

STAINLESS STEELFEET, WHEEL TRAYS AND EMBEDMENTLEGS EXCEPT FOR GALVANIZED RACKS

Materials: » Stainless Steel or Mild Steel

» Support Legs: 1.75” X .083” round tubing » Rack Feet: 0.25” plate » Wheel Trays: 0.120” plate » Crossbar: .25” plate

» Nylon 66 No Scratch® BumperFinishing Options:

Stainless Steel Bead Blast Satin (recommended)Stainless Steel Powder CoatStainless Steel Thermoplastic (Plascoat)Mild Steel Hot Dipped GalvanizedMild Steel Powder CoatMild Steel Thermoplastic (Plascoat)

Mounting Options:Surface Mount: 0.375” x 2” x 6” flat bar footEmbedded In-Ground Mount into concrete footing

Hardware Options:Concrete Wedge Anchors (standard)

+ Tamper Resistant Nuts (recommended)*For other hardware options contact our sales and support staff.

Product Specifications

Spacing and Setbacks

888-661-0555sales@sportworks.comwww.sportworks.com

15540 Woodinville Redmond Rd NE, Bldg A-200,Woodinville, WA 98072

Contractor:

Job:

Notes:

®

Powder Coat Options:

White Silver Black*DarkBlue

RoyalBlue

DOT Green Brown Yellow Red

*All colors are available in both Powder Coat and Thermoplastic (Plascoat) except for Dark Blue. Dark Blue is only available as a powder coat color.

*Many local governments will specify minimum spacing and setback requirements

Contact Information:

**All dimensional drawings are in inches. Minimum dimensions are placed above the recommended dimensions. Recommended dimensions are in ().

(60)

(60)

34°

39(46)(35)

(16)

(15) 39(46)

(16)

48(60)

168(180)

RACK MOUNTING BOLT CENTERLINE 48

(60)

(80)

(80)

(18)

(18)(18)

(18)

32.5(38.5)

32.5(38.5)

208(220)

RACK MOUNTING BOLT CENTERLINE

CHALK LINES8” APART