Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
OFFSOON MARK III Fiber End-face Cleaner
1
Introduction Dear customer
Thank you for choosing Offsoon Mark III products. Offsoon Mark III product has high quality
and good performance. To make full use of this product, please read this manual carefully before
using. Whenever you have any questions, please contact us and we are happy to provide any
assistance!
Symbols The following symbols are used for the important information in this manual.
Attention
1. The manual could be upgraded without further notice. Please kindly understand.
2. As far as possible, the content of this manual is accurate. However, if it is found that there
is erroneous or ambiguous content, please contact us.
Considerations about the product
1. Cleaning liquid is inflammable; keep it far from flame before refilling.
2. The gas must be dry and clean.
3.
4. Vent the gas and cleaning liquid if machine is going to be longtime idle.
The notice and restrictions in the process. prompt
OFFSOON MARK III Fiber End-face Cleaner
2
Product warranty Dimension Technology warrants that for a period of one (1) year from the Shipping Date, the
product purchased by customer shall be free of defects in material and workmanship under
normal authorized use consistent with the product instructions.
In the event that Dimension Technology receives notice during the warranty period that any part
its sole option, to either repair or replace the non-conforming part in accordance with this limited
warranty.
No warranty will apply if
1) Device damage caused by wrong operation;
2) Unconventional repair or modification;
3) The causes of failure outside of the instrument;
4) Used in high temperature and humidity, corrosive gas, harsh conditions such as vibration;
5) Fires, earthquakes and other natural disasters as well as the pollution caused by radioactive
substances and harmful substances, and when the other force majeure such as war, riot, crime.
6) Consumables and consumable parts.
Warranty period
The content of the warranty
Exceptions
OFFSOON MARK III Fiber End-face Cleaner
3
Structure of this manual
This chapter introduces the name and function of each
part. 1 Profile
Equipment
installation
This chapter describes the installation of the equipment and
the connection. 2
This chapter presents the performance characteristics and the
basic operation of the equipment. 3 Instruction
Manual
This chapter provides the information on the built-in
program.
Built-in
Program 4
Attachment This chapter mainly lists the contact information. 5
OFFSOON MARK III Fiber End-face Cleaner
4
CONTENTS INTRODUCTION ......................................................................................................... 1
PRODUCT WARRANTY ............................................................................................... 2
STRUCTURE OF THIS MANUAL ................................................................................... 3
CONTENTS ................................................................................................................. 4
1 PROFILE .................................................................................................................. 6
1.1 CHECK THE PACKAGING ......................................................................................... 6 1.1.1 Device ............................................................................................................ 6 1.1.2 Attachment ..................................................................................................... 6
1.2 FUNCTION .............................................................................................................. 7 1.2.1 Offsoon Mark III Front Panel ........................................................................ 7 1.2.2 Offsoon Mark III Side .................................................................................... 8 1.2.3 Offsoon Mark III Back Panel......................................................................... 8 1.2.4 Offsoon Mark III Handle ............................................................................... 9
2 INSTALLATION ........................................................................................................10
2.1 WORKING ENVIRONMENT.................................................................................... 10 2.2 THE HARDWARE CONNECTION ............................................................................. 10
2.2.1 The gas tube connection .............................................................................. 10 2.2.2 Power connection ........................................................................................ 10
2.3 HOW TO REFILL CLEANING LIQUID ....................................................................... 10 2.3.1 How to refill cleaning liquid ........................................................................ 10 2.3.2 Cautions ...................................................................................................... 11
3 INSTRUCTION MANUAL .........................................................................................12
3.1 FEATURES ............................................................................................................ 12 3.2 TECHNICAL SPECIFICATIONS ................................................................................ 12 3.3 APPLICATION ....................................................................................................... 13
OFFSOON MARK III Fiber End-face Cleaner
5
3.4 USER GUIDE ......................................................................................................... 13 3.5 HOW TO REPLACE ADAPTER ................................................................................. 13 3.6 INSTRUCTION MANUAL CAUTIONS ...................................................................... 14
4 BUILT-IN PROGRAM INSTRUCTIONS ......................................................................15
ATTACHMENT ...........................................................................................................16
OFFSOON MARK III Fiber End-face Cleaner
6
1 Profile
1.1 Check the packaging Check if there are any damages in the shipping. Dimension Technology delivers each
package very carefully. If you find anything damaged or missed, please contact our after-sales
staff for support.
1.1.1 Device
Figure 1- 1
1.1.2 Attachment
Please check whether all items contained, referring the packing list. If there are any missing
items, please contact us following the instruction in the attachment, at the end of the manual.
OFFSOON MARK III Fiber End-face Cleaner
7
1.2 Function 1.2.1 Offsoon Mark III Front Panel
Figure 1- 2 Front Panel
1. Cleaning liquid container screw the cover to refill cleaning liquid.
2. Power Indicator it lights up when power on.
3. Program number indicator displays the number of current program.
4. Liquid level Window shows the level of cleaning liquid in the container.
5. Program selection button press the button to increase the program number by one.
6. Cleaning Tube socket for gas tube, liquid tube, and electronic cable etc.
7. Gas-pressure Meter shows the current gas pressure.
OFFSOON MARK III Fiber End-face Cleaner
8
1.2.2 Offsoon Mark III Side
Figure 1- 3 Side Panel
1. Gas pressure regulating valve Pull the ring of the valve, then turn the adjust ring
clockwise to increase the gas pressure, turn the ring counter-clockwise to decrease the gas
pressure.
2. Oil Mist Separator Filter for oil mist. The filter can be replaced or cleaned.
3. Air Filter filter for the water vapor in the air. The filter can be replaced or cleaned.
1.2.3 Offsoon Mark III Back Panel
Figure 1- 4 Back Panel
OFFSOON MARK III Fiber End-face Cleaner
9
1. Power Switch --
--- Power On;
Power Off.
2. Liquid Let -- Press this switch to discharge the residual liquid in the tube.
3. Muffler Muffler for noise reduction
4. Power Input Interface -- DC 24V power input interface.
5. RS232 Interface for communication with PC and fiber end-face inspector.
6. Pedal Interface -- the connection interface of pedal switch.
7. Air inlet -- Dry clean air inlet.
8. I/O Interface -- to communicate with external devices.
9. Exhaust switch to control liquid pressure. In status, the cleaner maintains the liquid
pressure and be ready for cleaning; In status, the cleaner eliminates the liquid pressure.
The cleaning liquid can be added to the container.
1.2.4 Offsoon Mark III Handle
Figure 1- 5 Handle
1. Cleaning Adapter choose the right adaptor to clean the product.
2. Adapter Nut locks the adapter tightly.
3. Cotton Stalk Chuck pulls chuck to replace cotton stalk.
4. Cleaning Button press the button to execute one cleaning procedure.
OFFSOON MARK III Fiber End-face Cleaner
10
2 Installation
2.1 Working Environment For a consistent performance, please keep Offsoon Mark III from dusty and humidity
environment. The working environment need to be ventilated, with operation temperature
from 15 degC to 25deg C.
The exhaust tube of Offsoon Mark III should be extended to outdoor. I
machine near the window of the workshop.
2.2 The hardware connection
2.2.1 The gas tube connection
Gas-In and Gas-Out tubes need to be connected. Before connecting,
-in interface by
gas tube; connect exhaust gas to gas-out interface to outdoor.
2.2.2 Power connection
Please connect the power adaptor provided to the back panel. Do not use any other power
adaptors for the safety of personnel and machine.
2.3 How to refill cleaning liquid
2.3.1 How to refill cleaning liquid
1) Put the machine to a horizontal working stage.
2) Turn off the gas switch, then turn on the power switch.
3) Open the container, pour cleaning liquid into the container with funnel, observing the
cleaning liquid level.
4) Screw the cleaner cover tightly.
OFFSOON MARK III Fiber End-face Cleaner
11
5) till liquid
spout, which means all the remaining gas vented.
2.3.2 Cautions
1) The cleaner uses inflammable liquid with strong smell. Please keep the cleaner and
cleaning liquid far away from flames,
2) Contact with eyes or skin may cause irritation. If did please rinse well with water.
3) Do not breathe in huge amount of the fumes. If did, move the person into fresh air and take
the person to the hospital if in emergency.
OFFSOON MARK III Fiber End-face Cleaner
12
3 Instruction Manual
3.1 Features Excellent operability
Excellent cleaning performance
Low cleaning cost
Durable
Built-in 10 programs for various cleaning
Electric cotton swab stirring
Automatic cleaning and inspection
Built-in filter
Liquid level alarm
3.2 Technical Specifications Table 3-1 Specifications
Item Parameter
Gas resource Dry and cleaned N2 CO2 , or air
Gas pressure 0.5MPa 0.7MPa
Power consumption 15W
Operation temperature +5 ~+35
Storage temperature -10 ~+55
Power DC 24 ± 5% V
Size Machine: 330mm*200mm*155mm
Handle: 166mm*43mm*32mm
OFFSOON MARK III Fiber End-face Cleaner
13
3.3 Application Clean the end-face of the optical transceiver module
Clean the end-face of TOSA
Clean the female terminal of attenuator
3.4 User guide The machine could start work after hardware connection and cleaning liquid filled, screw
electronic power on.
Press the trigger switch to initial test. The cleaner works normally if little cleaning liquid and
gas spray out. Otherwise, re-start the machine in ten seconds after power off the machine.
After the initial test, fully insert cleaning adapter into the female connector, press trigger
switch to start cleaning. The cleaning lasts about 1 second, do not withdraw the adapter before
the gas fully blow out.
Figure 3- 1 Before and after cleaning
3.5 How to replace adapter User need to change proper adapter before start cleaning specific fiber connector. Unscrew the
OFFSOON MARK III Fiber End-face Cleaner
14
3.6 Instruction Manual Cautions 1) Cleaning liquid is inflammable; keep it far from flame before refilling. 2) The gas must be dry and clean. 3) 4) Vent the gas and cleaning liquid if machine is going to be longtime idle.
OFFSOON MARK III Fiber End-face Cleaner
15
4 Built-in Program Instructions Clean programs, as shown in the table.
Table 4-1 Built-in Program Instructions of LC/SC
Interface Type No. Character
Liquid volume Air jet time
LC/SC
0# Less Short
1# Less Long
2# median Short
3# median Long
4# More Short
5# More Long
Table 4-2 Built-in Program Instructions of MT
Interface Type No. Character
Liquid volume Air jet time
MT
0# Less Short
1# Less Long
2# median Short
3# median Long
4# More Short
5# More Long