Embed Size (px)
Citation preview
The European Association representingmetallurgical slag producers and processors
CIRCULAR ECONOMY IN THE SLAG INDUSTRY:RELIABLE PRODUCTS - REDUCED COSTS
OCT. 11th - 13th, 2017
9th EUROPEAN SLAG CONFERENCEM E T Z F R A N C E
EUROSLAG is the European association of organisations and companies concerned with all aspects of manufacturing and utilisation of ferrous slag products. Already in 1993 an idea to form an international organisation dealing with iron and steel slag matters was born. The situation with regard to representation of slag interests on the European level was unsa-tisfying. Representatives of 10 European countries agreed to create a Working Group “Metallurgical By-Products”.
The successful co-operation within this Working Group led to the formation of EUROSLAG, the European Slag Association in 2000. EUROSLAG by now has the legal form of a registered association and its statutes, which was agreed by all EUROSLAG members in 2004, includes all relevant requi-rements and is the basis of the association’s work.
EUROSLAG’s mission is to promote and develop the utilisation of ferrous slag in all appropriate si-tuations. The association seeks to:
• Ensure slag products are made by the best possible processes using suitable quality control testing and inspection procedures giving the highest level of consistency of performance
• Provide and encourage communication between slag producers and processors in differen countries, insuring that technical advances can be more readily understood and adopted throughout Europe
• Co-ordinate technical working parties, research and development into slag processing and use• Bring together people from both the supply and utilisation side of the industry to foster a grea-
ter understanding of slag and its benefits• Provide a co-ordinated approach to European Standardisation• Promote the image of slag and to build confidence in members, products and processes
The 8 previous European Slag Conference
• 1997 Marseille (France)
• 2000 Dusseldorf (Germany)
• 2002 Nottingham (United Kingdom)
• 2005 Oulu (Finland)
• 2007 Luxembourg (Luxembourg)
• 2010 Madrid (Spain)
• 2013 Ijmuiden (Netherlands)
• 2015 Linz (Austria)
Welcome note by the Chairman
Circular Economy in the Slag Industry – reliable Products – reduced Costs
Following this slogan the 9th European Slag Conference is going to take place in Metz from October 11th to 13th, 2017. About 45 million tonnes of ferrous slag are produced in Europe every year and most of this amount is used in different applications. So slag is a convincing example for resource efficien-cy and circular economy and we want to show and to proof this once more during the conference.
This conference continues a line of successful slag conferences starting 20 years ago in Marseille. We expect around 200 participants from 30 countries from Europe and overseas, for their part ex-pecting 24 presentations concerning production and processing, characterisation and properties, research and development.
As legislative and political conditions become more and more important we are glad to open the conference with a round table discussion concerning state of legislation, rules and standards in Europe. Participants from European Commission and French economy as well as producers and users of slag products are going to talk about obstacles and chances of slag in circular economy.
The purpose of the 9th European Slag Conference is the exchange of knowledge related to technical applications, environmental and legal subjects for all kind of ferrous slag. So I am looking forward to another great conference giving us possibilities to experience from presentations and discussions and to improve utilisation of ferrous slag in all appropriate situations.
Thomas MERKEL
Wednesday, October 11, 2017
8:30 - 9:35 Registration
9:35 - 9:40 Welcome Michel GITZHOFER, President AFOCO
Jean-Luc BOHL, President METZ METROPOLE, 1st Vice-President of Region GRAND EST
9:40 - 10:00 Opening Thomas MERKEL, Chairman EUROSLAG
Topic 1: State of legislation, rules and standards in Europe Session Chairperson: Christophe Journet, MPE MEDIA, France
10:00 - 10:10 Circular Economy as an Opportunity in the Slag Industry Hervé Martin, Head of the Coal and Steel Research Unit, EUROPEAN COMMISSION
10:10 - 10:20 The European Commission’s view Gabriele Morgante, EUROPEAN COMMISSION, DG Growth, Resource Efficiency and Raw Materials
10:20 - 10:30 How to Boost EU industrial Symbiosis and Material Recycling: Steel Perspective Aurelio Braconi, Policy Officer on Circular Economy and Raw Materials, EUROFER (European Steel
Association)
10:30 - 10:40 The French view Christophe Debien, General Delegate, Emmanuelle Moesch, Institut de l’économie circulaire, France
10:40 - 10:50 The Users’ view Didier Desmoulin, Technical Director COLAS, France
10:50 - 12:00 Round table discussion Moderator: Christophe Journet Aurelio Braconi, EUROFER, Didier Desmoulin, COLAS, Hervé Martin, EUROPEAN COMMIS-
SION, Gabriele Morgante, EUROPEAN COMMISSION, Thomas Reiche, FEhS, Éric Seitz, AFOCO / PHOENIX SERVICES
12:00 - 1:20 Lunch
Wednesday, October 11, 2017Conference Program, October 11 - 13, 2017
Topic 2: Proceeding from “by-products” to recognized “products” Session Chairperson: Pascal Leconte, CTPL, France
1:20 - 1:40 Iron and Steel Slags: Global Perspective on the Circular Economy Craig Heidrich, Australasian (Iron & Steel) Slag Association, Australia
1:40 - 2:00 Regulatory Framework for Iron and Steel Slags: Towards major legal Changes for Slags in France – A new Revolution?
Jérémie Domas, Centre Technique et de Promotion des Laitiers Sidérurgiques (CTPL), France
2:00 - 2:20 Towards an integrated advising System for Blast Oxygen Furnace (BOF) Slags in Agriculture
François-Xavier Gaumont, MEAC, France
2:20 - 2:40 A strict but stable Regulation, the first Paver for High Quality Slag Products Samyr El Bedoui, Direction territorials, Est, CEREMA, France. Cyril Florentin, HARSCO Metals & Minerals, France
2:40 - 3:00 Cost Effective Secondary Road Reclamation Utilizing Steel Slag in the USA John Yzenas, Edw. C. Levy Co., Levy Technical Laboratory, USA
3:00 - 3:20 Discussion
3:20 - 3:50 Coffee break
3:50 - 4:10 10 years of “Novos Caminhos” Program: Use of Steel Slag to promote Mobility with Sustainability
Eduardo Kazuaki Shiramata, ArcelorMittal Tubarão, Brasil
4:10 - 4:30 Side-Stream Materials – from Research to Product Björn Haase, Höganäs Sweden AB, Sweden
4:30 - 4:50 Transformation of electric arc furnace slag into a (latent) hydraulic material Andreas Ehrenberg, FEhS – Institut für Baustoff-Forschung e.V., Germany
4:50 - 5:10 A Novel Approach to particle Size Reduction Chris Polling, SCB International Materials Inc., USA
5:10 - 5:30 Environmental Properties and Legal Status of Ferrochrome Slag Juha Ylimaunu, Outokumpu Oyi, Finland
5:30 - 6:00 Discussion
Thursday, October 12, 2017
8:30 - 9:30 Welcome
Topic 3: Characteristics of slag: updated studies, research… Session chairperson: Anton Deruwe, GSV, Belgium
9:30 - 9:50 Fast Method for Slag Characterization During Ladle Furnace Steelmaking Process Based on Spectral Reflectance
Asier Vicente, ArcelorMittal Global Research & Development, Spain
9:50 - 10:10 Effect of basicity and impurities on Cr-spinel stability Davide Mombelli, Politecnico di Milano, Dipartimento di Meccanica, Italy
10:10 - 10:30 Natural Radioactivity in Blast Furnace Slag, a Limitation for its Marketing as a Building Material?
Pierre Gaujé, ArcelorMittal Global Research and Development, France
10:30 - 10:50 Discussion
10:50 - 11:20 Coffee break
11:20 - 11:40 Bituminous Mixtures Manufactured Exclusively with Steelmaking Waste Aggregates
Marta Skaf, Department of Construction, EPS, University of Burgos, Spain
11:40 - 12:00 Field Evaluation of Porous Asphalt Mixed with Basic Oxygen Furnace (BOF) Steel Slag
Jian-Shiuh Chen, National Cheng Kung University, Taiwan
12:00 - 12:20 Performace Properties of Asphalt Mixtures Containing Linz-Donawitz (LD) Steel Slag and Blast Furnace Slag
Ivan Isailovic, TU Braunschweig, ISBS, Braunschweig Pavement Engineering Centre, Germany
12:20 - 12:40 Discussion
12:40 - 2:00 Lunch
Thursday, October 12, 2017Conference Program, October 11 - 13, 2017
Topic 4: New techniques, new markets Session Chairperson: Agnieszka Morillon, FEhs-Institute, Germany
2:00 - 2:20 The NoWaste Strategy of Georgsmarienhütte Henning Schliephake, Georgsmarienhütte GmbH, Germany
2:20 - 2:40 Improving utilization of BOF-slag by Developing New Separation Techniques Peter Drissen, FEhS - Institut für Baustoff-Forschung e.V., Germany
2:40 - 3:00 Evaluation of the Combined Use of BOF Slag and Sugarcane Bagasse for the Passive Remediation of Acid Mine Drainage in South Africa
Dennis Grubb, Phoenix Services LLC, USA
3:00 - 3:20 CHROMIC: New processes to recover metals from stainless steel and ferrochrome slags
Liesbeth Horckmans, VITO NV, Belgium
3:20 - 3:40 Discussion
3:40 - 4:00 Coffee break
4:00 - 4:20 Beneficial use of LD converter steel slags and ground granulated blast furnace slags in hydraulic road binder: SIDMIX HRB
Julien Waligora, EIFFAGE Infrastructures Gestion et Développement, Direction Recherche et Innovation, France
4:20 - 4:40 Heat Recovery of EAF slag in consideration of further application David Algermissen, FEhS – Institut für Baustoff-Forschung e.V., Germany
4:40 - 5:00 A comparison between European electric arc furnace slags Amaia Santamaría, University of Basque Country, Dept. Of Mining, Metallurgical and Materials
Science, Spain
5:00 - 5:20 Sustainable utilisation of EAF slag by successful research and optimised operational practice
Dirk Mudersbach, Max Aicher Umwelt GmbH, Germany
5:20 - 5:40 Discussion
5:40 Closing
Friday, October 13, 2017
Dillingen, Saar, Germany
Aktien-Gesellschaft der Dillinger Hüttenwerke (Dillinger), founded in 1685, is a world leader today in the manufacture of high-grade heavy plate steel. The Dillinger Group employs a total of about 7,400 people and has annual sales of around two billion euros. High-tech plate from Dillinger is used to realize extraordinary and technically sophisticated projects all over the globe, including in the areas of steel construction, engineering, offshore, offshore wind power, and line pipe and boiler construction.
https://www.dillinger.de/d/en/corporate/index.shtml
1685 Founded by Marquis de Lenoncourt, under permission from Louis XIV
1804 The first rolled plate at Dillingen1809 The first public stockholding company in Germany 1835 The „Dillinger Blechlehre“1948 The Dillinger Hütte is one of the founders of SOLLAC1961 First continuous casting plant in the world1974 Construction of blast furnace n° 41981 Foundation of ROGESA and ZKS
1985 Starting up of a new 5.5 m wide rolling stand Construction of blast furnace n° 5
1991 Foundation of Europipe, together with Mannesmann and GTS Industires.
1992 Integration of the heavy plate mill GTS Industries.1998 First continuous casting plant with 400 mm slab
thickness and soft reduction2010 The worlds thickest slab: 450 mm!2014 GTS Industries changes to Dillinger France2014 Foundation of Steelwind Nordenham 2016 New CC6 vertical continuous caster2017 The worlds thickest slab: 600 mm!
1st plant tour (Group 1)
7:30 am exactly: departure by bus from ARSENAL Conference Center
12:30 pm: arrival back by bus at the ARSENAL Conference Center
History of Dillinger
Friday, October 13, 2017TECHNICAL VISITS
Pont-à-Mousson, France
The Blast Furnaces of Pont-à-Mousson have been erected in 1856 with the goal to elaborate pig iron out of the iron ore from the Lorraine mines (Fe content about 30 %). Since 1980, the iron ore origins are Brazil and Mauretania. The coke comes from Poland.
Pont-à-Mousson is the world leader
for the fabrication of ductile iron pipes. There are 3 major types of products
• Pipes for transportation of water as well from drainage as for drinkable water • Street plugs • Rainwater pipes for buildings
The Pont-à-Mousson plant is the largest manufacturer of pig iron pipes in the world, with 3 blast furnaces and 3 centrifuging lines for the pipes fabrication.
http://www.pamline.fr/saint-gobain-pam
2nd plant tour (Group 2)
8:00 am exactly: departure by bus from ARSENAL Conference Center
12:15 pm: arrival back by bus at the ARSENAL Conference Center
Friday, October 13, 2017
Ukange, France
MetaFensch is a French publicly funded research centre dedicated to the study of melting and casting. Founded in 2014 and based in Uckange (eastern France, near the borders with Luxembourg, Germany and Belgium), MetaFensch collaborates with industrial and academic partners using a state-of-the-art platform equipped with both pilot- and full-scale melting furnaces.
Various alloys are studied, including titanium, steel, aluminum, and copper, with a particular focus on
incorporating more recycled materials into alloy recipes while maintaining or improving quality. Our goal is to accelerate the development and industrial deployment of innovative metallurgical
products and processes.
3rd plant tour (Group 3)
8:30 am exactly: departure by bus from ARSENAL Conference Center
12:00 pm: arrival back by bus at the ARSENAL Conference Center
http://www.metafensch.fr/
Friday, October 13, 2017TECHNICAL VISITS
Société Lorraine d’Agrégats (EUROVIA Group)Nilvange, France
The first activity of SLAG was the collection and re-treatment of the phosphorous slags produced by the blast-furnaces in the Lorraine Region, from fresh production at the time the blast furnaces were still in operation, and from older stockpiles.
Furthermore, SLAG developed useful applications and markets for these new recycled materials: road construc-tion, ready-mixed concrete, rockwool, prefabricated ele-ments (cinder block, pavement…) So Slag is a major aggregates provider in the Lorraine Re-gion to the Luxembourg market.
http://www.eurovia.fr/agences/5471-slag-nilvange
SLAG32, rue des Vosges - CS 2016757240 NILVANGETel. : 03 82 88 21 00 - Fax : 03 82 34 22 18E-mail: [email protected]
Contact : Laurent Froehlich
L’Arsenalplace of the event
Place del’Esplanade
Avenue Ney
1 Entrance
2 Salle de l’esplanade / Conferences
3 Orangerie / Lunches
4 Saint-Pierre-aux-Nonnains / Gala dinner
The Gala Dinner will take place at Saint Pierre Aux Nonnains,
former basilica built in the 4th Century. 4
Chef Christophe Dufossé, star-rated, will tempt your taste-buds: • “French cuisine” sincere and generous, • quality and proximity ingredients!
To enhance your table, Chef Christophe Dufossé also prepared a personalized selection if wines from Champagne, Languedoc-Roussillon and Bordeaux.
The parisian cabaret-review “Precious Diamond” will give you a show in a beautiful atmosphere of feathers and sequins.
Don’t forget your voucher to be presented at
the entrance
Dîner de galaOCT. 11TH, 2017 - 8:00 PM
With 6 500 sq.Mof stained-glass windows (13th to 20th century including some by Chagall) the cathedral boasts
the largest surface area of stained glass in Europe. It’s also one of the Europe’s tallest buildings with a neve 42 meters
high.
1La cathédrale Saint-Étienne (Saint-Stephen’s cathedral)
Enjoy Metz
addresses that are abolute musts !A long history has bequeathed a top-notch urban and architectural legacy to the town of Metz, now makingit one of the Europe’s most richly endowed cities in terms of art, just 1 hr 20 mins. from Paris. Ten addresses not to be missed...10
A museum housing important gallo-roman and medieval collections, an archeology section exceptional for its richness, a superb section on medieval architecture, a large fine arts area, and a space devoted to the history of the Jewish community in Metz.
Built between 1738 and 1752, this is France’s oldest Opera-house/ Theatre still in activity today. Its
architecture is typical of the 18th century and the statues representing muses along the balustrade
were created by Charles Pêtre of Metz in 1858.
Inaugurated in 2010 and designed to offer a unique
experience, this space is dedicated to discovery and
creativity in all its forms. Avery lively centre where
events succeed one another all year long, in a very impressive building…
2 Le centre Pompidou-Metz
3 Le musée de la Cour d’Or
4 L’opéra-théâtre
Built in the early 20th century, its architecture barrows inspiration from the Rhineland cathedrals of Speyer and Worms, giving it a mediaval look. The Temple is intended for the use of the civilian community and is still a place of worship.
5 le Temple Neuf
This fortified city gate to the east of Metz owes its name to the Teutonic Knights or
Knights Hospitaller of Notre-Dame-des-Alle-mands, who has founded a hospice in the
adjacent street. It is the most imposing testimonial to the medieval ramparts still
standing today (13th-16th Century)
Its picturesque architecture with an
Italian influence bears witness to Metz’s prosperity in the
Middle Age.
6 La place Saint-Louis 7 La porte des Allemands
An urban setting unique in its kind in both France and Europe, this avenue is a striking example of the electric styles and building materials chosen by architects in Metz in the early 20th century. The town was then looked upon as a real testing laboratory for architecture.
The Esplanade, Plan d’Eau, Parc de la Seille…Metz boasts over 1,400 acres of naturel greenery, i.e. almost 45 sq.m per inhabitant. It is thus ranked in the top tier
of France’s “green cities”. You will really enjoy strolling through thenumerous parks and gardens
around the town. Lapped by the waters of the Rivers Moselle and La Seille, Metz unfurls no less than 36
kilometers of paths along its waterways.
These cloisters are a little haven of peacefulness and serenity at the heart of the town, a former monastery remarkable for its elegance and simplicity. It took its name from the Community of the Recollets (Franciscan monks) who lived there from 1603 until the French Revolution. In 1972, Jean-Marie Pelt founded the European Institute of Ecology here.
9 Le cloître des Récollets
8 L’avenue Foch
10 Greenway and waterway
Conference information
Wednesday or Thursday...METZ CITY SIGHTSEEING TOUR
Wednesday 11 or Thursday 12, we propose you a guided visit of Metz, by bus.
5:45 pm: departure by bus from ARSENAL Conference Center
7:15 pm: arrival back by bus at the ARSENAL Conference Center
Sightseeing Tour Registration Please register at the desk when arriving on October 11.
Event team
The event team may be contacted at the registration desk. If you have any question, Mrs Gobert, M. Osswald and M. Seitz will be happy to answer tehm and to help you at any time.
• Françoise Gobert: +33 (0)6 10 16 58 08
• Jean-Paul Osswald: +33 (0)6 09 94 44 30
• Éric Seitz: +33 (0)6 12 77 87 13
Registration desk
The registration desk will be open as follow:
• Wednesday October 11: 8:00 am - 18:00 pm
• Thursday October 12: 8:00 am - 18:00 pm
Name badges
Participants are resuasted to wear their name badges visibly at all times during the conference. Access to the conference, lunches, gala dinner may be denied to persons not wearing name badges.
Coffee and refreshments will be available at all times
A S S O C I A T I O N F R A N C A I S E D E S O P E R A T E U R SS U R C O - P R O D U I T S I N D U S T R I E L S
www.afoco.org
Dedicated to CIRCULAR ECONOMYto build a durable future with alternative materials
AFOCOwould like to thank all the generous sponsors who support the 9th EUROPEAN SLAG CONFERENCE.
ArcelorMittal is the world’s leading steel and mining company, with 199,000 employees, a presence in 60 countries and an industrial footprint in 19 countries. Guided by a philosophy to produce safe, sustainable steel, we are the leading supplier of quality steel in the major global steel markets including automotive, construction, household appliances and packaging, with world-class research and development and outs-tanding distribution networks. In 2016, ArcelorMittal had revenues of US$56.8 billion and crude steel production of 90.8 million tonnes, while own iron ore production reached 55.2 million tonnes. In France, ArcelorMittal has 16,440 employees including 800 researchers, working in its 40 production sites, distribution and service centers, and four R&D sites. In 2016 ArcelorMittal produced 9.4 million tonnes liquid steel in France. France accounts for 30% of ArcelorMittal’s flat steel production of in Europe.
ArcelorMittal Atlantique and Lorraine is part of the Flat Products Division of the ArcelorMittal Group. It is a large industrial complex consisting of a competitive coastal hot plant, Dunkerque and 7 Finishing sites powered by the Dunkirk and Florange hot trains and a set of skills to serve cus-tomers. With a workforce of more than 7000 employees, its ambition is to be a leading industrial entity with profitable steel sectors, remarkable for its Health and Safety performance, a partner of its customers and exemplary by the commitment of its teams. Atlantique and Lorraine is present in the automotive, industrial and packaging markets. The automotive market is its largest market. The factories are located close to the major companies in the European automotive sector. Its production capacity is 7 million tons of steel per year.
BERGERAT MONNOYEUR??, rue ???? 57??? ?????
Tel. : ??? - Fax : ???E-mail: ???@???
Contact : ???
Bergerat Monnoyeur is the sole CATERPILLAR Dealer for France since 1929. Bergerat Monnoyeur employs 1 800 persons, through it’s network of 40 sales & service outlets offers, sales, short term & long term rental, used machines, service & parts for all Caterpillar equipments.
EURAGGLO and the K.R. KOMAREK Group offer a briquetting, compaction and granulation process based on the technology of roller presses and compactors.
This technology allows the briquetting of steel-mill by-products and many other metal, metal oxides and mineral materials. This method can be applied to such materials as slags, mill scales, steel grits, mill sludge, blast furnace sludge, EAF dust and various fines from DRI, ferro-alloys, iron oxide pellets, coal and coke, etc.
The process consists in briquetting steel mill by-products in a roller press to produce briquettes of various sizes with ovoid or pillow shape, in order to recycle them in the melting process.
Advantages • A large choice of briquetting press capacity and design (from few tonnes to 60 mtph or more).• A proven precess: many references of such plants in operation worldwide, in steel mills.• An experience in different processes
and applications involving different binders or composition (by-products and coal, etc...).
Proposed Services • Audit of existing units.• Applied R&D in pilot plant.• Engineering process• Manufacturing of compactors and granulators• Integration of complementary equipment
(dryer, crusher, mixer...)• Maintenance and associated on-site services
Briquetting & Granulation Equipment
EURAGGLO SASMember of the K.R. KOMAREK GroupZAE de Blanc Misseron - Rue Jean Jaurès - F-59920 QUIEVRECHAINTel. : +33 327 090 009 - Fax : +33 327 090 010 E-mail: [email protected]
Eurogranulats
EUROGRANULATS30, rue du Canal - Pôle Industriel du Malambas - 57280 Hauconcourt, FranceTel. : +33 (0)3 87 51 48 60 - Fax : +33 (0)3 87 51 59 88 - [email protected]
Contact : Mathieu Gitzhofer
RECYCLING OF STEEL AGGREGATESInnovative activities and eco-awareness to building sustainable
A professional recognised by steelworks [SLR]Liquid slags: • Extraction under furnaces • Transportation with steel mill machines • Treatments and iron partition
A high experience in recycling of steel aggregates from fresh production in road construction. Well fitted treatments to create high quality aggregates obtained from: • Blast oxygen furnace slags • Electric arc furnace slags • Blast furnace slags
Research and control laboratory for innovative recycling of industrial by-products
Evin Zozan: Phone: +492065-99 45 76 - Mobile: +49173 5233416
E-mail: [email protected] Reiche:
Phone: +492065-99 45 31 - Mobile: +49173-73 66 089 E-mail: [email protected]
The tasks of the FEhS Institute in its focal areas of research and services include the testing and monitoring of industrial by-products of the iron and steel industry, and other construction products. We certify manufacturers, research opportunities for utilising ferrous slag and smelting works by-products, provide consulting ser-vices for construction clients, and dispatch experts to national and international committees for standardisation. The institute finances itself and its projects through membership fees, publicly subsidised research assignments, testing, mo-nitoring and certification services, and through consulting activities for members and external clients in the fields of administration, the construction industry, and plant technology.
Research focusesThe FEhS Institute conducts work and research on the subject areas of building materials, fertilisers, secondary raw materials, and slag metallurgy, environment and transport construction. This is carried out in our own laboratories for the fields of cement, concrete, chemistry and environment, transport construction, minera-logy, microscopy and slag metallurgy.
Cooperation arrangements in science and researchIn the scientific sector, close cooperation arrangements based on mutuality are in place with universities and other private and public research institutions, e.g. the Institute of Building Materials Research of the RWTH Aachen.
Depending on the issues at hand, these are integrated into the work of the Institute as consultants or partners on pu-blicly subsidised research projects.
Duisburg Logport I Since 1954 I 45 members of staffThe FEhS-Institut für Baustoff-Forschung e.V. is the only research institute in the field of ferrous slag globally. We are associated with the leading steel manufacturers in Europe. Our main business areas are the applied research on slags with a practical orientation, consulting services on the subject of building material based on slags as well as their inspection in the construction industry. We make slags a little bit more sustainable each day – with tradition and modernity. Our scientists stand for reliable and cus-tomer-oriented services.www.fehs.de
FERRODUO GmbHVulkanstraße 54 - 47053 Duisburg / GermanyTel. : +49 (0) 203 729 738-0 - Fax : +49 (0) 203 729 738-18www.ferroduo.com
Contact : Alexander Kehrmann
PhoenixPhoenix Services International, LLC (“Phoenix”) was founded in 2006 to provide provide res-ponsive, world-class class mill services to steel producers around the globe .
Typicalservices include pit digging with loaders or slag handling with pot carriers; metal recovery; slag slag processing and magnetic metal separation using modern, high -capacity plants; slag mar-keting; scrap handling ; scrap processing; charge bucket loading and transportation; scrap upgrading; slab conditioning services; briquetting; oxycutting; refractory tear out; packaging and warehousing; logistics.
Distinctive strengths include include unparalleled reliability, as well as the expertise to maximize the recovery of metallics and market steel mill by -products such as slag, mill scale and residual metallics.
PHOENIXE-mail: [email protected]
Contact : Éric Seitz
SGA, a subsidiary corporation of Eiffage and Phoenix Services groups, is located beside ArcelorMittal Dunkirk (59) steelmaking plant.
The Company provides a wide range of services at the AM melt shop and is specialised in the recovery, treatment, and commercialisation of LD converter steel slags, which are by-products resulting from steel-making process in oxygen converters (Linz-Donawitz process).
SGA produces steel slag gravels of various sizes (0-6 ; 0-30 ; 0-80 mm…) and a hydraulic road binder, the Sidmix®, mainly composed of GGBF and LD steel slags (95 % in total).
SGARue rue Louis Blanqui - 59760 Grande-Synthe
Tel. : +33 328 699 950 - Fax : +33 328 699 959
TMSE-mail:
Contact : Gérard Chevalier
